tests/gss/check-spnego.in

   1 #!/bin/sh
   2 #
   3 # Copyright (c) 2006 Kungliga Tekniska Högskolan
   4 # (Royal Institute of Technology, Stockholm, Sweden).
   5 # All rights reserved.
   6 #
   7 # Redistribution and use in source and binary forms, with or without
   8 # modification, are permitted provided that the following conditions
   9 # are met:
  10 #
  11 # 1. Redistributions of source code must retain the above copyright
  12 #    notice, this list of conditions and the following disclaimer.
  13 #
  14 # 2. Redistributions in binary form must reproduce the above copyright
  15 #    notice, this list of conditions and the following disclaimer in the
  16 #    documentation and/or other materials provided with the distribution.
  17 #
  18 # 3. Neither the name of the Institute nor the names of its contributors
  19 #    may be used to endorse or promote products derived from this software
  20 #    without specific prior written permission.
  21 #
  22 # THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
  23 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  24 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  25 # ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
  26 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  27 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  28 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  29 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  30 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  31 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  32 # SUCH DAMAGE.
  33 #
  34 # $Id$
  35 #
  36
  37 srcdir="@srcdir@"
  38 objdir="@objdir@"
  39
  40 # If there is no useful db support compile in, disable test
  41 ../db/have-db || exit 77
  42
  43 R=TEST.H5L.SE
  44
  45 port=@port@
  46
  47 keytabfile=${objdir}/server.keytab
  48 keytab="FILE:${keytabfile}"
  49 cache="FILE:krb5ccfile"
  50 cacheds="FILE:krb5ccfile-ds"
  51
  52 kinit="${TESTS_ENVIRONMENT} ../../kuser/kinit -c $cache --no-afslog --forwardable"
  53 kinitds="${TESTS_ENVIRONMENT} ../../kuser/kinit -c $cacheds --no-afslog"
  54 kadmin="${TESTS_ENVIRONMENT} ../../kadmin/kadmin -l -r $R"
  55 kdc="${TESTS_ENVIRONMENT} ../../kdc/kdc --addresses=localhost -P $port"
  56
  57 context="${TESTS_ENVIRONMENT} ../../lib/gssapi/test_context"
  58
  59 KRB5_CONFIG="${objdir}/krb5.conf"
  60 export KRB5_CONFIG
  61
  62 KRB5_KTNAME="${keytab}"
  63 export KRB5_KTNAME
  64 KRB5CCNAME="${cache}"
  65 export KRB5CCNAME
  66 NTLM_ACCEPTOR_CCACHE="${cacheds}"
  67 export NTLM_ACCEPTOR_CCACHE
  68 NTLM_USER_FILE="${srcdir}/ntlm-user-file.txt"
  69 export NTLM_USER_FILE
  70
  71 GSSAPI_SPNEGO_NAME=host@host.test.h5l.se
  72 export GSSAPI_SPNEGO_NAME
  73
  74 rm -f ${keytabfile}
  75 rm -f current-db*
  76 rm -f out-*
  77 rm -f mkey.file*
  78
  79 > messages.log
  80
  81 echo Creating database
  82 ${kadmin} \
  83     init \
  84     --realm-max-ticket-life=1day \
  85     --realm-max-renewable-life=1month \
  86     ${R} || exit 1
  87
  88 ${kadmin} add -p p1 --use-defaults host/host.test.h5l.se@${R} || exit 1
  89 ${kadmin} ext -k ${keytab} host/host.test.h5l.se@${R} || exit 1
  90
  91 ${kadmin} add -p kaka --use-defaults digest/${R}@${R} || exit 1
  92
  93 ${kadmin} add -p ds --use-defaults digestserver@${R} || exit 1
  94 ${kadmin} modify --attributes=+allow-digest digestserver@${R} || exit 1
  95
  96 ${kadmin} add -p u1 --use-defaults user1@${R} || exit 1
  97
  98 echo "Doing database check"
  99 ${kadmin} check ${R} || exit 1
 100
 101 echo u1 > ${objdir}/foopassword
 102 echo ds > ${objdir}/barpassword
 103
 104 echo Starting kdc
 105 ${kdc} &
 106 kdcpid=$!
 107
 108 sh ${srcdir}/../kdc/wait-kdc.sh
 109 if [ "$?" != 0 ] ; then
 110     kill ${kdcpid}
 111     exit 1
 112 fi
 113
 114 trap "kill ${kdcpid}; echo signal killing kdc; exit 1;" EXIT
 115
 116 exitcode=0
 117
 118 echo "Getting client initial tickets"
 119 ${kinit} --password-file=${objdir}/foopassword user1@${R} || exitcode=1
 120 echo "Getting digestserver initial tickets"
 121 ${kinitds} --password-file=${objdir}/barpassword digestserver@${R} || exitcode=1
 122
 123 echo "======context building for each mech"
 124
 125 for mech in ntlm krb5 ; do
 126     echo "${mech}"
 127     ${context} --mech-type=${mech} --ret-mech-type=${mech} \
 128         --name-type=hostbased-service host@host.test.h5l.se || \
 129         { exitcode=1 ; echo test failed; }
 130 done
 131
 132 echo "spnego"
 133 ${context} \
 134     --mech-type=spnego \
 135     --ret-mech-type=krb5 \
 136     --name-type=hostbased-service \
 137     host@host.test.h5l.se || \
 138     { exitcode=1 ; echo test failed; }
 139
 140 echo "test failure cases"
 141 ${context} --mech-type=ntlm --ret-mech-type=krb5 \
 142     --name-type=hostbased-service host@host.test.h5l.se 2> /dev/null && \
 143     { exitcode=1 ; echo test failed; }
 144
 145 ${context} --mech-type=krb5 --ret-mech-type=ntlm \
 146     --name-type=hostbased-service host@host.test.h5l.se 2> /dev/null && \
 147     { exitcode=1 ; echo test failed; }
 148
 149 echo "======spnego variants context building"
 150
 151 for arg in \
 152      "" \
 153      "--mutual" \
 154      "--delegate" \
 155      "--mutual --delegate" \
 156      "--getverifymic --wrapunwrap" \
 157      "--mutual --getverifymic --wrapunwrap" \
 158     ; do
 159
 160     echo "no NTLM acceptor cred ${arg}"
 161     NTLM_ACCEPTOR_CCACHE="${cacheds}-no"
 162     ${context} --mech-type=spnego \
 163         $arg \
 164         --name-type=hostbased-service \
 165         --ret-mech-type=krb5  \
 166         host@host.test.h5l.se || \
 167         { exitcode=1 ; echo test failed; }
 168     NTLM_ACCEPTOR_CCACHE="${cacheds}"
 169
 170     echo "no NTLM initiator cred ${arg}"
 171     NTLM_USER_FILE="${srcdir}/ntlm-user-file.txt-no"
 172     ${context} --mech-type=spnego \
 173         $arg \
 174         --name-type=hostbased-service \
 175         --ret-mech-type=krb5 \
 176         host@host.test.h5l.se || \
 177         { exitcode=1 ; echo test failed; }
 178     NTLM_USER_FILE="${srcdir}/ntlm-user-file.txt"
 179
 180     echo "no krb5 acceptor cred ${arg}"
 181     KRB5_KTNAME="${keytab}-no"
 182     ${context} --mech-type=spnego \
 183         $arg \
 184         --server-no-delegate \
 185         --name-type=hostbased-service \
 186         --ret-mech-type=ntlm \
 187         host@host.test.h5l.se || \
 188         { exitcode=1 ; echo test failed; }
 189     KRB5_KTNAME="${keytab}"
 190
 191     echo "no krb5 initiator cred ${arg}"
 192     KRB5CCNAME="${cache}-no"
 193     ${context} --mech-type=spnego \
 194         $arg \
 195         --server-no-delegate \
 196         --name-type=hostbased-service \
 197         --ret-mech-type=ntlm \
 198         host@host.test.h5l.se || \
 199         { exitcode=1 ; echo test failed; }
 200     KRB5CCNAME="${cache}"
 201
 202 done
 203
 204 trap "" EXIT
 205
 206 echo "killing kdc (${kdcpid})"
 207 kill ${kdcpid} 2> /dev/null
 208
 209 exit $exitcode
 210
 211