tests/kdc/check-bx509.in

   1 #!/bin/sh
   2 #
   3 # Copyright (c) 2019 Kungliga Tekniska Högskolan
   4 # (Royal Institute of Technology, Stockholm, Sweden).
   5 # All rights reserved.
   6 #
   7 # Redistribution and use in source and binary forms, with or without
   8 # modification, are permitted provided that the following conditions
   9 # are met:
  10 #
  11 # 1. Redistributions of source code must retain the above copyright
  12 #    notice, this list of conditions and the following disclaimer.
  13 #
  14 # 2. Redistributions in binary form must reproduce the above copyright
  15 #    notice, this list of conditions and the following disclaimer in the
  16 #    documentation and/or other materials provided with the distribution.
  17 #
  18 # 3. Neither the name of the Institute nor the names of its contributors
  19 #    may be used to endorse or promote products derived from this software
  20 #    without specific prior written permission.
  21 #
  22 # THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
  23 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  24 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  25 # ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
  26 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  27 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  28 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  29 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  30 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  31 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  32 # SUCH DAMAGE.
  33
  34 top_builddir="@top_builddir@"
  35 env_setup="@env_setup@"
  36 objdir="@objdir@"
  37
  38 testfailed="echo test failed; cat messages.log; exit 1"
  39
  40 . ${env_setup}
  41
  42 # If there is no useful db support compiled in, disable test
  43 ${have_db} || exit 77
  44
  45 R=TEST.H5L.SE
  46 DCs="DC=test,DC=h5l,DC=se"
  47
  48 port=@port@
  49 bx509port=@bx509port@
  50
  51 kadmin="${kadmin} -l -r $R"
  52 bx509d="${bx509d} --reverse-proxied -p $bx509port"
  53 kdc="${kdc} --addresses=localhost -P $port"
  54
  55 server=datan.test.h5l.se
  56 otherserver=other.test.h5l.se
  57 cachefile="${objdir}/cache.krb5"
  58 cache="FILE:${cachefile}"
  59 cachefile2="${objdir}/cache2.krb5"
  60 cache2="FILE:${cachefile2}"
  61 keyfile="${hx509_data}/key.der"
  62 keyfile2="${hx509_data}/key2.der"
  63 kt=${objdir}/kt
  64 keytab=FILE:${kt}
  65 ukt=${objdir}/ukt
  66 ukeytab=FILE:${ukt}
  67
  68 kinit="${kinit} -c $cache ${afs_no_afslog}"
  69 klist2="${klist} --hidden -v -c $cache2"
  70 klistjson="${klist} --json -c $cache"
  71 klist="${klist} --hidden -v -c $cache"
  72 kgetcred="${kgetcred} -c $cache"
  73 kdestroy="${kdestroy} -c $cache ${afs_no_unlog}"
  74 kx509="${kx509} -c $cache"
  75
  76 KRB5_CONFIG="${objdir}/krb5-bx509.conf"
  77 export KRB5_CONFIG
  78
  79 rsa=yes
  80 pkinit=no
  81 if ${hxtool} info | grep 'rsa: hx509 null RSA' > /dev/null ; then
  82     rsa=no
  83 fi
  84 if ${hxtool} info | grep 'rand: not available' > /dev/null ; then
  85     rsa=no
  86 fi
  87
  88 if ${kinit} --help 2>&1 | grep "CA certificates" > /dev/null; then
  89     pkinit=yes
  90 fi
  91
  92 # If we doesn't support pkinit and have RSA, give up
  93 if test "$pkinit" != yes -o "$rsa" != yes ; then
  94     exit 77
  95 fi
  96
  97
  98 rm -f current-db*
  99 rm -f out-*
 100 rm -f mkey.file*
 101 rm -f *.pem *.crt *.der
 102 rm -rf simple_csr_authz
 103
 104 mkdir -p simple_csr_authz
 105
 106 > messages.log
 107
 108 # We'll avoid using a KDC for now.  For testing /bx509 we only need keys for
 109 # Negotiate tokens, and we'll use ktutil and kimpersonate to make it possible
 110 # to create and accept those without a KDC.  When we test /bnegotiate, however,
 111 # we'll start a KDC.
 112
 113 # csr_grant ext-type value grantee_principal
 114 csr_grant() {
 115     mkdir -p "${objdir}/simple_csr_authz/${3}"
 116     touch "${objdir}/simple_csr_authz/${3}/${1}-${2}"
 117 }
 118
 119 csr_revoke() {
 120     rm -rf "${objdir}/simple_csr_authz"
 121     mkdir -p "${objdir}/simple_csr_authz"
 122 }
 123
 124 # get_cert ""         curl-opts
 125 # get_cert "&qparams" curl-opts
 126 get_cert() {
 127     url="http://${server}:${bx509port}/bx509?csr=$csr${1}"
 128     shift
 129     curl -g --resolve ${server}:${bx509port}:127.0.0.1                  \
 130          -H "Authorization: Negotiate $token"                           \
 131          "$@" "$url"
 132 }
 133
 134 rm -f $kt $ukt
 135 $ktutil -k $keytab add -r -V 1 -e aes128-cts-hmac-sha1-96               \
 136     -p HTTP/datan.test.h5l.se@${R} ||
 137     { echo "failed to setup kimpersonate credentials"; exit 2; }
 138 $ktutil -k $keytab list ||
 139     { echo "failed to setup kimpersonate credentials"; exit 2; }
 140 $kimpersonate --ccache=$cache -k $keytab -R -t aes128-cts-hmac-sha1-96  \
 141    -c foo@${R} -s HTTP/datan.test.h5l.se@${R} ||
 142     { echo "failed to setup kimpersonate credentials"; exit 2; }
 143 $klist ||
 144     { echo "failed to setup kimpersonate credentials"; exit 2; }
 145
 146 echo "Setting up certificates"
 147 # We need:
 148 #
 149 #  - a CA certificate for issuing client certificates
 150 #  - a CA certificate for issuing server certificates
 151 #  - a CA certificate for issuing mixed  certificates
 152 #  - a certificate for bx509 itself (well, not in reverse proxy mode, but we'll
 153 #    make one anyways)
 154
 155 # Make the realm's user cert issuer CA certificate.
 156 #
 157 # NOTE WELL: We need all three KeyUsage values listed below!
 158 #            We also need this to be of type "pkinit-kdc",
 159 #            which means we'll get an appropriate EKU OID as
 160 #            well.
 161 $hxtool ca  --issue-ca --self-signed --type=pkinit-kdc          \
 162             --ku=digitalSignature --ku=keyCertSign --ku=cRLSign \
 163             --pk-init-principal=krbtgt/${R}@${R}                \
 164             --generate-key=rsa --key-bits=1024                  \
 165             --subject="OU=Users,CN=KDC,${DCs}"                  \
 166             --certificate=PEM-FILE:"${objdir}/user-issuer.pem" ||
 167     { echo "failed to setup CA certificate"; exit 2; }
 168
 169 # We'll use the user cert issuer as the PKINIT anchor, allowing bx509-issued
 170 # certificates to be used for PKINIT.  Though we won't be testing PKINIT here
 171 # -- we test kx509->PKINIT in check-pkinit.
 172 cp ${objdir}/user-issuer.pem ${objdir}/pkinit-anchor.pem
 173
 174 # Put the cert alone in the trust anchors file
 175 ex "${objdir}/pkinit-anchor.pem" <<"EOF"
 176 /-----BEGIN CERTIFICATE-----
 177 1,.-1 d
 178 wq
 179 EOF
 180
 181 $hxtool ca  --issue-ca --self-signed                                \
 182             --ku=digitalSignature --ku=keyCertSign --ku=cRLSign     \
 183             --generate-key=rsa --key-bits=1024                      \
 184             --subject="OU=Servers,CN=KDC,${DCs}"                    \
 185             --certificate=PEM-FILE:"${objdir}/server-issuer.pem" ||
 186     { echo "failed to setup CA certificate"; exit 2; }
 187
 188 $hxtool ca  --issue-ca --self-signed                                \
 189             --ku=digitalSignature --ku=keyCertSign --ku=cRLSign     \
 190             --generate-key=rsa --key-bits=1024                      \
 191             --subject="OU=Users,CN=KDC,${DCs}"                      \
 192             --certificate=PEM-FILE:"${objdir}/mixed-issuer.pem" ||
 193     { echo "failed to setup CA certificate"; exit 2; }
 194
 195 $hxtool ca  --issue-ca --type=https-negotiate-server                \
 196             --ca-certificate=PEM-FILE:"${objdir}/server-issuer.pem" \
 197             --ku=digitalSignature --pk-init-principal=HTTP/${server}@${R}\
 198             --generate-key=rsa --key-bits=1024 --subject=""         \
 199             --certificate=PEM-FILE:"${objdir}/bx509.pem" ||
 200     { echo "failed to setup CA certificate"; exit 2; }
 201
 202 # XXX Before starting bx509d let us use kdc test programs to check that:
 203 #
 204 #  - the negotiate token validator plugin works
 205 #  - the simple CSR authorizer plugin works
 206 #  - the KDC CA tester program works
 207
 208 echo "Check gss-token and Negotiate token validator plugin"
 209 token=$(KRB5CCNAME=$cache $gsstoken HTTP@$server | tr A B)
 210 $test_token_validator -a datan.test.h5l.se Negotiate "$token" &&
 211     { echo "Negotiate token validator accepted invalid token"; exit 2; }
 212 token=$(KRB5CCNAME=$cache $gsstoken HTTP@$server)
 213 $test_token_validator -a datan.test.h5l.se Negotiate "$token" ||
 214     { echo "Negotiate token validator failed to validate valid token"; exit 2; }
 215
 216 echo "Making a plain CSR"
 217 $hxtool request-create  --subject='' --generate-key=rsa --key-bits=1024 \
 218                         --key=FILE:"${objdir}/k.der" "${objdir}/req" ||
 219     { echo "Failed to make a CSR"; exit 2; }
 220
 221 rm -f trivial.pem server.pem email.pem
 222
 223 echo "Testing plain user cert issuance KDC CA"
 224 $test_kdc_ca -a bx509 -A foo@${R} PKCS10:${objdir}/req       \
 225              PEM-FILE:${objdir}/trivial.pem ||
 226     { echo "Trivial offline CA test failed"; exit 2; }
 227 $hxtool print --content PEM-FILE:${objdir}/trivial.pem ||
 228     { echo "Trivial offline CA test failed"; exit 2; }
 229 $hxtool acert --end-entity                                              \
 230               --expr="%{certificate.subject} == \"CN=foo,$DCs\""        \
 231               -P "foo@${R}" "FILE:${objdir}/trivial.pem" ||
 232     { echo "Trivial offline CA test failed"; exit 2; }
 233 $hxtool acert --expr="%{certificate.subject} == \"OU=Users,CN=KDC,$DCs\""   \
 234               --lacks-private-key "FILE:${objdir}/trivial.pem" ||
 235     { echo "Trivial offline CA test failed (issuer private keys included!!)"; exit 2; }
 236
 237 echo "Testing other cert issuance KDC CA"
 238 csr_revoke
 239 # https server cert
 240 $hxtool request-create  --subject='' --generate-key=rsa --key-bits=1024 \
 241                         --key=FILE:"${objdir}/k.der"                    \
 242                         --eku=id_pkix_kp_serverAuth                     \
 243                         --dnsname=foo.test.h5l.se "${objdir}/req" ||
 244     { echo "Failed to make a CSR with a dNSName SAN request"; exit 2; }
 245 $test_kdc_ca -a bx509 foo@${R} PKCS10:${objdir}/req              \
 246              PEM-FILE:${objdir}/server.pem &&
 247     { echo "Trivial offline CA test failed: unauthorized issuance (dNSName)"; exit 2; }
 248 csr_grant dnsname foo.test.h5l.se foo@${R}
 249 csr_grant eku 1.3.6.1.5.5.7.3.1 foo@${R}
 250 $test_kdc_ca -a bx509 foo@${R} PKCS10:${objdir}/req              \
 251              PEM-FILE:${objdir}/server.pem ||
 252     { echo "Offline CA test failed for explicitly authorized dNSName"; exit 2; }
 253 $hxtool print --content PEM-FILE:${objdir}/server.pem ||
 254     { echo "Offline CA test failed for explicitly authorized dNSName"; exit 2; }
 255 $hxtool acert --expr="%{certificate.subject} == \"OU=Servers,CN=KDC,$DCs\""   \
 256               --lacks-private-key "FILE:${objdir}/server.pem" ||
 257     { echo "Trivial offline CA test failed (issuer private keys included!!)"; exit 2; }
 258 # email cert
 259 $hxtool request-create  --subject='' --generate-key=rsa --key-bits=1024 \
 260                         --key=FILE:"${objdir}/k.der"                    \
 261                         --eku=id_pkix_kp_clientAuth                     \
 262                         --email=foo@test.h5l.se "${objdir}/req" ||
 263     { echo "Failed to make a CSR with an rfc822Name SAN request"; exit 2; }
 264 $test_kdc_ca -a bx509 foo@${R} PKCS10:${objdir}/req              \
 265              PEM-FILE:${objdir}/email.pem &&
 266     { echo "Offline CA test failed: unauthorized issuance (dNSName)"; exit 2; }
 267 csr_grant email foo@test.h5l.se foo@${R}
 268 csr_grant eku 1.3.6.1.5.5.7.3.2 foo@${R}
 269 $test_kdc_ca -a bx509 foo@${R} PKCS10:${objdir}/req              \
 270              PEM-FILE:${objdir}/email.pem ||
 271     { echo "Offline CA test failed for explicitly authorized dNSName"; exit 2; }
 272 $hxtool print --content PEM-FILE:${objdir}/email.pem ||
 273     { echo "Offline CA test failed for explicitly authorized dNSName"; exit 2; }
 274 $hxtool acert --expr="%{certificate.subject} == \"OU=Users,CN=KDC,$DCs\""   \
 275               --lacks-private-key "FILE:${objdir}/email.pem" ||
 276     { echo "Offline CA test failed (issuer private keys included!!)"; exit 2; }
 277
 278 if ! which curl; then
 279     echo "curl is not available -- not testing bx509d"
 280     exit 77
 281 fi
 282
 283 if ! test -x ${objdir}/../../kdc/bx509d; then
 284     echo "Configured w/o libmicrohttpd -- not testing bx509d"
 285     exit 77
 286 fi
 287
 288 echo "Creating database"
 289 ${kadmin} init \
 290     --realm-max-ticket-life=1day \
 291     --realm-max-renewable-life=1month \
 292     ${R} || exit 1
 293 ${kadmin} add -r --use-defaults foo@${R} || exit 1
 294 ${kadmin} add -r --use-defaults bar@${R} || exit 1
 295 ${kadmin} modify --pkinit-acl="CN=foo,DC=test,DC=h5l,DC=se" foo@${R} || exit 1
 296
 297
 298 echo "Starting bx509d"
 299 ${bx509d} -H $server --cert=${objdir}/bx509.pem -t --daemon ||
 300     { echo "bx509 failed to start"; exit 2; }
 301 bx509pid=`getpid bx509d`
 302
 303 trap "kill -9 ${bx509pid}; echo signal killing bx509d; exit 1;" EXIT
 304 ec=0
 305
 306 rm -f trivial.pem server.pem email.pem
 307
 308 echo "Making a plain CSR"
 309 csr_revoke
 310 $hxtool request-create  --subject='' --generate-key=rsa --key-bits=1024 \
 311                         --key=FILE:"${objdir}/k.der" "${objdir}/req" ||
 312     { echo "Failed to make a CSR"; exit 2; }
 313 csr=$($rkbase64 -- ${objdir}/req | $rkvis -h --stdin)
 314
 315 # XXX Add autoconf check for curl?
 316 #     Create a barebones bx509 HTTP/1.1 client test program?
 317
 318 echo "Fetching a trivial user certificate"
 319 token=$(KRB5CCNAME=$cache $gsstoken HTTP@$server)
 320 if (set -vx; get_cert '' -sf -o "${objdir}/trivial.pem"); then
 321     $hxtool print --content "FILE:${objdir}/trivial.pem"
 322     if $hxtool acert --end-entity                                            \
 323                     --expr="%{certificate.subject} == \"CN=foo,$DCs\""  \
 324                     -P "foo@${R}" "FILE:${objdir}/trivial.pem"; then
 325         echo 'Successfully obtained a trivial client certificate!'
 326     else
 327         echo 'FAIL: Obtained a trivial client certificate w/o expected PKINIT SAN)'
 328         exit 1
 329     fi
 330     if $hxtool acert --expr="%{certificate.subject} == \"OU=Users,$DCs\""   \
 331                      --has-private-key "FILE:${objdir}/trivial.pem"; then
 332         echo 'Successfully obtained a trivial client certificate!'
 333     fi
 334 else
 335     echo 'Failed to get a certificate!'
 336     exit 1
 337 fi
 338
 339 echo "Checking that authorization is enforced"
 340 csr_revoke
 341 get_cert '&rfc822Name=foo@bar.example' -vvv -o "${objdir}/bad1.pem"
 342 if (set -vx; get_cert '&rfc822Name=foo@bar.example' -sf -o "${objdir}/trivial.pem"); then
 343     $hxtool print --content "FILE:${objdir}/bad1.pem"
 344     echo 'Obtained a client certificate for a non-granted name!'
 345     exit 1
 346 else
 347     echo 'Correctly failed to get a client certificate for a non-granted name'
 348 fi
 349
 350 if (set -vx; get_cert "&dNSName=$server" -sf -o "${objdir}/bad2.pem"); then
 351     $hxtool print --content "FILE:${objdir}/bad2.pem"
 352     echo 'Obtained a server certificate for a non-granted name!'
 353     exit 1
 354 else
 355     echo 'Correctly failed to get a server certificate for a non-granted name'
 356 fi
 357
 358 echo "Fetching a server certificate with one dNSName SAN"
 359 csr_grant dnsname $server foo@${R}
 360 if (set -vx; get_cert "&dNSName=$server" -sf -o "${objdir}/server.pem"); then
 361     $hxtool print --content "FILE:${objdir}/server.pem"
 362     if (set -vx; $hxtool acert --expr="%{certificate.subject} == \"\""             \
 363                     --end-entity -P foo@${R}               \
 364                     "FILE:${objdir}/server.pem"); then
 365         echo 'Got a broken server certificate (has PKINIT SAN)'
 366         exit 1
 367     elif $hxtool acert --end-entity -D $server "FILE:${objdir}/server.pem"; then
 368         echo 'Successfully obtained a server certificate!'
 369     else
 370         echo 'Got a broken server certificate'
 371         exit 1
 372     fi
 373 else
 374     echo 'Failed to get a server certificate!'
 375     exit 1
 376 fi
 377
 378 echo "Fetching a server certificate with two dNSName SANs"
 379 csr_grant dnsname "second-$server" foo@${R}
 380 if (set -vx;
 381     get_cert "&dNSName=${server}&dNSName=second-$server" -sf \
 382         -o "${objdir}/server2.pem"); then
 383     $hxtool print --content "FILE:${objdir}/server2.pem"
 384     if $hxtool acert --expr="%{certificate.subject} == \"\""             \
 385                     --end-entity -P foo@${R}               \
 386                     "FILE:${objdir}/server2.pem"; then
 387         echo 'Got a broken server certificate (has PKINIT SAN)'
 388         exit 1
 389     elif $hxtool acert --end-entity -D "$server"                      \
 390                                    -D "second-$server"               \
 391                                    "FILE:${objdir}/server2.pem"; then
 392         echo 'Successfully obtained a server certificate with two dNSName SANs!'
 393     else
 394         echo 'Got a broken server certificate (wanted two dNSName SANs)'
 395         exit 1
 396     fi
 397 else
 398     echo 'Failed to get a server certificate with two dNSName SANs!'
 399     exit 1
 400 fi
 401
 402 echo "Fetching an email certificate"
 403 csr_grant email foo@bar.example foo@${R}
 404 if (set -vx; get_cert "&rfc822Name=foo@bar.example" -sf -o "${objdir}/email.pem"); then
 405     $hxtool print --content "FILE:${objdir}/email.pem"
 406     if $hxtool acert --end-entity -P "foo@${R}" "FILE:${objdir}/email.pem"; then
 407         echo 'Got a broken email certificate (has PKINIT SAN)'
 408         exit 1
 409     elif $hxtool acert --expr="%{certificate.subject} == \"\""           \
 410                       --end-entity -M foo@bar.example                   \
 411                       "FILE:${objdir}/email.pem"; then
 412         echo 'Successfully obtained a email certificate!'
 413     else
 414         echo 'Got a broken email certificate'
 415         exit 1
 416     fi
 417 else
 418     echo 'Failed to get an email certificate!'
 419     exit 1
 420 fi
 421
 422 # Need to start a KDC to test this.
 423 rm -f $kt $ukt
 424 ${kdestroy}
 425 ${kadmin} add -r --use-defaults HTTP/${server}@${R} || exit 1
 426 ${kadmin} ext_keytab -r -k $keytab  HTTP/${server}@${R} || exit 1
 427 ${kadmin} add -r --use-defaults HTTP/${otherserver}@${R} || exit 1
 428 ${kadmin} ext_keytab -r -k $ukeytab foo@${R} || exit 1
 429
 430 echo "Starting kdc";
 431 ${kdc} --detach --testing || { echo "kdc failed to start"; exit 1; }
 432 kdcpid=`getpid kdc`
 433 trap "kill -9 ${kdcpid} ${bx509pid}; echo signal killing kdc and bx509d; exit 1;" EXIT
 434
 435 ${kinit} -kt $ukeytab foo@${R} || exit 1
 436 $klist || { echo "failed to setup kimpersonate credentials"; exit 2; }
 437
 438 echo "Fetch TGT (not granted for other)"
 439 token=$(KRB5CCNAME=$cache $gsstoken HTTP@$server)
 440 if (set -vx;
 441     curl -o "${cachefile2}" -Lgsf                                       \
 442          --resolve ${server}:${bx509port}:127.0.0.1                     \
 443          -H "Authorization: Negotiate $token"                           \
 444          "http://${server}:${bx509port}/get-tgt?cname=bar@${R}&address=8.8.8.8"); then
 445     echo "Got a TGT with /get-tgt end-point when not granted!"
 446     exit 2
 447 fi
 448
 449 echo "Fetch TGT"
 450 (set -vx; csr_grant pkinit foo@${R} foo@${R})
 451 (set -vx; csr_grant eku 1.3.6.1.5.2.3.4 foo@${R})
 452 token=$(KRB5CCNAME=$cache $gsstoken HTTP@$server)
 453 if ! (set -vx;
 454     curl -o "${cachefile2}" -Lgsf                                       \
 455          --resolve ${server}:${bx509port}:127.0.0.1                     \
 456          -H "Authorization: Negotiate $token"                           \
 457          "http://${server}:${bx509port}/get-tgt?address=8.8.8.8"); then
 458     echo "Failed to get a TGT with /get-tgt end-point"
 459     exit 2
 460 fi
 461
 462 ${klist2} | grep Addresses:.IPv4:8.8.8.8 ||
 463     { echo "Failed to get a TGT with /get-tgt end-point with addresses"; exit 2; }
 464
 465 echo "Fetch TGT (inception)"
 466 ${kdestroy}
 467 token=$(KRB5CCNAME=$cache2 $gsstoken HTTP@$server)
 468 if ! (set -vx;
 469     curl -o "${cachefile}" -Lgsf                                        \
 470          --resolve ${server}:${bx509port}:127.0.0.1                     \
 471          -H "Authorization: Negotiate $token"                           \
 472          "http://${server}:${bx509port}/get-tgt?address=8.8.8.8"); then
 473     echo "Failed to get a TGT with /get-tgt end-point"
 474     exit 2
 475 fi
 476 ${kgetcred} -H HTTP/${server}@${R} ||
 477     { echo "Trivial offline CA test failed (TGS)"; exit 2; }
 478 ${klist} | grep Addresses:.IPv4:8.8.8.8 ||
 479     { echo "Failed to get a TGT with /get-tgt end-point with addresses"; exit 2; }
 480
 481 echo "Fetch TGT (for other)"
 482 (set -vx; csr_grant pkinit bar@${R} foo@${R})
 483 ${kdestroy}
 484 token=$(KRB5CCNAME=$cache2 $gsstoken HTTP@$server)
 485 if ! (set -vx;
 486     curl -o "${cachefile}" -Lgsf                                        \
 487          --resolve ${server}:${bx509port}:127.0.0.1                     \
 488          -H "Authorization: Negotiate $token"                           \
 489          "http://${server}:${bx509port}/get-tgt?cname=bar@${R}&address=8.8.8.8"); then
 490     echo "Failed to get a TGT with /get-tgt end-point"
 491     exit 2
 492 fi
 493 ${kgetcred} -H HTTP/${server}@${R} ||
 494     { echo "Trivial offline CA test failed (TGS)"; exit 2; }
 495 ${klist} | grep Addresses:.IPv4:8.8.8.8 ||
 496     { echo "Failed to get a TGT with /get-tgt end-point with addresses"; exit 2; }
 497
 498 echo "Fetch TGT (for other, w/ lifetime req under max)"
 499 ${kadmin} modify --max-ticket-life=10d krbtgt/${R}@${R}
 500 (set -vx; csr_grant pkinit bar@${R} foo@${R})
 501 ${kdestroy}
 502 token=$(KRB5CCNAME=$cache2 $gsstoken HTTP@$server)
 503 if ! (set -vx;
 504     curl -o "${cachefile}" -Lgsf                                        \
 505          --resolve ${server}:${bx509port}:127.0.0.1                     \
 506          -H "Authorization: Negotiate $token"                           \
 507          "http://${server}:${bx509port}/get-tgt?cname=bar@${R}&address=8.8.8.8&lifetime=3d"); then
 508     echo "Failed to get a TGT with /get-tgt end-point"
 509     exit 2
 510 fi
 511 ${kgetcred} -H HTTP/${server}@${R} ||
 512     { echo "Trivial offline CA test failed (TGS)"; exit 2; }
 513 if which jq >/dev/null; then
 514     if ! ${klistjson} | jq -e '
 515             (reduce (.tickets[0]|(.Issued,.Expires)|
 516                     strptime("%b %e %H:%M:%S %Y")|mktime) as $t
 517                 (0; if .==0 then $t else $t - . end) / 86400) | floor |
 518             . == 3'; then
 519         echo "Incorrect lifetime"
 520         exit 2
 521     fi
 522 fi
 523
 524 echo "Fetch TGT (for other, w/ lifetime req over max)"
 525 ${kadmin} modify --max-ticket-life=10d krbtgt/${R}@${R}
 526 (set -vx; csr_grant pkinit bar@${R} foo@${R})
 527 ${kdestroy}
 528 token=$(KRB5CCNAME=$cache2 $gsstoken HTTP@$server)
 529 if ! (set -vx;
 530     curl -o "${cachefile}" -Lgsf                                        \
 531          --resolve ${server}:${bx509port}:127.0.0.1                     \
 532          -H "Authorization: Negotiate $token"                           \
 533          "http://${server}:${bx509port}/get-tgt?cname=bar@${R}&address=8.8.8.8&lifetime=10d"); then
 534     echo "Failed to get a TGT with /get-tgt end-point"
 535     exit 2
 536 fi
 537 ${kgetcred} -H HTTP/${server}@${R} ||
 538     { echo "Trivial offline CA test failed (TGS)"; exit 2; }
 539 if which jq >/dev/null; then
 540     if ! ${klistjson} | jq -e '
 541             (reduce (.tickets[0]|(.Issued,.Expires)|
 542                     strptime("%b %e %H:%M:%S %Y")|mktime) as $t
 543                 (0; if .==0 then $t else $t - . end) / 86400) | floor |
 544             . == 5'; then
 545         echo "Incorrect lifetime"
 546         exit 2
 547     fi
 548 fi
 549
 550 echo "Fetch TGT (for other, w/ lifetime req under max)"
 551 ${kadmin} modify --max-ticket-life=10d krbtgt/${R}@${R}
 552 (set -vx; csr_grant pkinit bar@${R} foo@${R})
 553 ${kdestroy}
 554 token=$(KRB5CCNAME=$cache2 $gsstoken HTTP@$server)
 555 if ! (set -vx;
 556     curl -o "${cachefile}" -Lgsf                                        \
 557          --resolve ${server}:${bx509port}:127.0.0.1                     \
 558          -H "Authorization: Negotiate $token"                           \
 559          "http://${server}:${bx509port}/get-tgt?cname=bar@${R}&address=8.8.8.8&address=8.9.10.11&address=11.11.11.11&address=12.12.12.12&lifetime=5d"); then
 560     echo "Failed to get a TGT with /get-tgt end-point"
 561     exit 2
 562 fi
 563 ${kgetcred} -H HTTP/${server}@${R} ||
 564     { echo "Trivial offline CA test failed (TGS)"; exit 2; }
 565 if which jq >/dev/null; then
 566     if ! ${klistjson} | jq -e '
 567             (reduce (.tickets[0]|(.Issued,.Expires)|
 568                     strptime("%b %e %H:%M:%S %Y")|mktime) as $t
 569                 (0; if .==0 then $t else $t - . end) / 86400) |
 570             . >= 4'; then
 571         echo "Failed to get a TGT with /get-tgt end-point with addresses"
 572         exit 2
 573     fi
 574 fi
 575
 576 echo "Fetch negotiate token (pre-test)"
 577 # Do what /bnegotiate does, roughly, prior to testing /bnegotiate
 578 $hxtool request-create  --subject='' --generate-key=rsa --key-bits=1024 \
 579                         --key=PEM-FILE:"${objdir}/k.pem" "${objdir}/req" ||
 580     { echo "Failed to make a CSR"; exit 2; }
 581 $test_kdc_ca -a bx509 -A foo@${R} PKCS10:${objdir}/req       \
 582              PEM-FILE:${objdir}/pkinit-test.pem ||
 583     { echo "Trivial offline CA test failed (CA)"; exit 2; }
 584 cat ${objdir}/k.pem >> ${objdir}/pkinit-test.pem
 585 ${kinit} -C PEM-FILE:${objdir}/pkinit-test.pem foo@${R} ||
 586     { echo "Trivial offline CA test failed (PKINIT)"; exit 2; }
 587 ${kgetcred} -H HTTP/${server}@${R} ||
 588     { echo "Trivial offline CA test failed (TGS)"; exit 2; }
 589 KRB5CCNAME=$cache $gsstoken HTTP@$server | KRB5_KTNAME="$keytab" $gsstoken -r ||
 590     { echo "Trivial offline CA test failed (gss-token)"; exit 2; }
 591
 592 # Check that we get up to three tixaddrs k/v in the log
 593 grep 'REQ.*numtixaddrs=4 tixaddrs=IPv4:8.8.8.8 tixaddrs=IPv4:8.9.10.11 tixaddrs=IPv4:11.11.11.11.*wrongaddr=yes' ${objdir}/messages.log ||
 594     { echo "KDC not warning about requests from wrong address"; exit 2; }
 595
 596 echo "Fetching a Negotiate token"
 597 token=$(KRB5CCNAME=$cache $gsstoken HTTP@$server)
 598 if (set -vx;
 599     curl -o negotiate-token -Lgsf                                       \
 600          --resolve ${server}:${bx509port}:127.0.0.1                     \
 601          -H "Authorization: Negotiate $token"                           \
 602          "http://${server}:${bx509port}/bnegotiate?target=HTTP%40${server}"); then
 603     # bx509 sends us a token w/o a newline for now; we add one because
 604     # gss-token expects it.
 605     test -s negotiate-token && echo >> negotiate-token
 606     if test -s negotiate-token && KRB5_KTNAME="$keytab" $gsstoken -Nr < negotiate-token; then
 607         echo 'Successfully obtained a Negotiate token!'
 608     else
 609         echo 'Failed to get a Negotiate token (got an unacceptable token)!'
 610         exit 1
 611     fi
 612 else
 613     echo 'Failed to get a Negotiate token!'
 614     exit 1
 615 fi
 616
 617 referer=https://${otherserver}/blah
 618 redirect=$(${rkvis} -h https://${otherserver}/blah?q=whatever)
 619 if (set -vx;
 620     curl -o negotiate-token -Lgsf                                       \
 621          --resolve ${server}:${bx509port}:127.0.0.1                     \
 622         -H "Authorization: Negotiate $token"                            \
 623         "http://${server}:${bx509port}/bnegotiate?target=HTTP%40${server}&redirect=${redirect}"); then
 624     echo "Error: /bnegotiate with target and redirect succeeded"
 625     exit 1
 626 fi
 627
 628 if (set -vx;
 629     curl -o negotiate-token -Lgsf                                       \
 630          --resolve ${server}:${bx509port}:127.0.0.1                     \
 631         -H "Authorization: Negotiate $token"                            \
 632         "http://${server}:${bx509port}/bnegotiate?redirect=${redirect}"); then
 633     echo "Error: /bnegotiate with redirect but no Referer succeeded"
 634     exit 1
 635 fi
 636
 637 referer=http://${otherserver}/blah
 638 redirect=$(${rkvis} -h http://${otherserver}/blah?q=whatever)
 639 if (set -vx;
 640     curl -gsf                                                           \
 641          --resolve ${server}:${bx509port}:127.0.0.1                     \
 642         -H "Authorization: Negotiate $token"                            \
 643         -H "Referer: $referer"                                          \
 644         "http://${server}:${bx509port}/bnegotiate?redirect=${redirect}"); then
 645     echo "Error: redirect for non-https referer"
 646     exit 1
 647 fi
 648
 649 referer=https://${otherserver}/blah
 650 redirect=$(${rkvis} -h https://${otherserver}/blah?q=whatever)
 651 if (set -vx;
 652     curl -gfs -D curlheaders                                            \
 653          --resolve ${server}:${bx509port}:127.0.0.1                     \
 654         -H "Authorization: Negotiate $token"                            \
 655         -H "Referer: $referer"                                          \
 656         "http://${server}:${bx509port}/bnegotiate?redirect=${redirect}"); then
 657     read junk code junk < curlheaders
 658     if test "$code" = 307; then
 659         echo "Got a proper redirect"
 660     else
 661         echo "Error: unexpected status code $code (wanted 307)"
 662     fi
 663 else
 664     echo "Error: no redirect"
 665     exit 1
 666 fi
 667
 668 echo "killing kdc (${kdcpid}) and bx509d (${bx509pid})"
 669 sh ${leaks_kill} kdc $kdcpid || ec=1
 670 sh ${leaks_kill} bx509d $bx509pid || ec=1
 671
 672 trap "" EXIT
 673
 674 exit $ec