1 # source this file; set up for tests
3 # Copyright (C) 2009-2012 Free Software Foundation, Inc.
5 # This program is free software: you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation, either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Using this file in a test
19 # =========================
21 # The typical skeleton of a test looks like this:
24 # . "${srcdir=.}/init.sh"; path_prepend_ .
25 # Execute some commands.
26 # Note that these commands are executed in a subdirectory, therefore you
27 # need to prepend "../" to relative filenames in the build directory.
28 # Note that the "path_prepend_ ." is useful only if the body of your
29 # test invokes programs residing in the initial directory.
30 # For example, if the programs you want to test are in src/, and this test
31 # script is named tests/test-1, then you would use "path_prepend_ ../src",
32 # or perhaps export PATH='$(abs_top_builddir)/src$(PATH_SEPARATOR)'"$$PATH"
33 # to all tests via automake's TESTS_ENVIRONMENT.
34 # Set the exit code 0 for success, 77 for skipped, or 1 or other for failure.
35 # Use the skip_ and fail_ functions to print a diagnostic and then exit
36 # with the corresponding exit code.
39 # Executing a test that uses this file
40 # ====================================
42 # Running a single test:
43 # $ make check TESTS=test-foo.sh
45 # Running a single test, with verbose output:
46 # $ make check TESTS=test-foo.sh VERBOSE=yes
48 # Running a single test, with single-stepping:
49 # 1. Go into a sub-shell:
51 # 2. Set relevant environment variables from TESTS_ENVIRONMENT in the
53 # $ export srcdir=../../tests # this is an example
54 # 3. Execute the commands from the test, copy&pasting them one by one:
55 # $ . "$srcdir/init.sh"; path_prepend_ .
60 ME_
=`expr "./$0" : '.*/\(.*\)$'`
62 # We use a trap below for cleanup. This requires us to go through
63 # hoops to get the right exit status transported through the handler.
64 # So use 'Exit STATUS' instead of 'exit STATUS' inside of the tests.
65 # Turn off errexit here so that we don't trip the bug with OSF1/Tru64
66 # sh inside this function.
67 Exit
() { set +e
; (exit $1); exit $1; }
69 # Print warnings (e.g., about skipped and failed tests) to this file number.
70 # Override by defining to say, 9, in init.cfg, and putting say,
71 # export ...ENVVAR_SETTINGS...; $(SHELL) 9>&2
72 # in the definition of TESTS_ENVIRONMENT in your tests/Makefile.am file.
73 # This is useful when using automake's parallel tests mode, to print
74 # the reason for skip/failure to console, rather than to the .log files.
77 # Note that correct expansion of "$*" depends on IFS starting with ' '.
78 # Always write the full diagnostic to stderr.
79 # When stderr_fileno_ is not 2, also emit the first line of the
80 # diagnostic to that file descriptor.
83 # If IFS does not start with ' ', set it and emit the warning in a subshell.
85 ' '*) printf '%s\n' "$*" >&2
86 test $stderr_fileno_ = 2 \
87 ||
{ printf '%s\n' "$*" |
sed 1q
>&$stderr_fileno_ ; } ;;
88 *) (IFS
=' '; warn_
"$@");;
91 fail_
() { warn_
"$ME_: failed test: $@"; Exit
1; }
92 skip_
() { warn_
"$ME_: skipped test: $@"; Exit
77; }
93 fatal_
() { warn_
"$ME_: hard error: $@"; Exit
99; }
94 framework_failure_
() { warn_
"$ME_: set-up failure: $@"; Exit
99; }
96 # Sanitize this shell to POSIX mode, if possible.
97 DUALCASE
=1; export DUALCASE
98 if test -n "${ZSH_VERSION+set}" && (emulate sh
) >/dev
/null
2>&1; then
101 alias -g '${1+"$@"}'='"$@"'
104 case `(set -o) 2>/dev/null` in
105 *posix
*) set -o posix
;;
109 # We require $(...) support unconditionally.
110 # We require a few additional shell features only when $EXEEXT is nonempty,
111 # in order to support automatic $EXEEXT emulation:
112 # - hyphen-containing alias names
113 # - we prefer to use ${var#...} substitution, rather than having
114 # to work around lack of support for that feature.
115 # The following code attempts to find a shell with support for these features.
116 # If the current shell passes the test, we're done. Otherwise, test other
117 # shells until we find one that passes. If one is found, re-exec it.
118 # If no acceptable shell is found, skip the current test.
120 # The "...set -x; P=1 true 2>err..." test is to disqualify any shell that
121 # emits "P=1" into err, as /bin/sh from SunOS 5.11 and OpenBSD 4.7 do.
123 # Use "9" to indicate success (rather than 0), in case some shell acts
124 # like Solaris 10's /bin/sh but exits successfully instead of with status 2.
126 # Eval this code in a subshell to determine a shell's suitability.
127 # 10 - passes all tests; ok to use
128 # 9 - ok, but enabling "set -x" corrupts app stderr; prefer higher score
130 gl_shell_test_script_
='
131 test $(echo y) = y || exit 1
133 if test "$VERBOSE" = yes; then
134 test -n "$( (exec 3>&1; set -x; P=1 true 2>&3) 2> /dev/null)" && score_=9
136 test -z "$EXEEXT" && exit $score_
137 shopt -s expand_aliases
141 && test ${v#a} = bx \
142 && test $(a-b) = zoo \
146 if test "x$1" = "x--no-reexec"; then
149 # Assume a working shell. Export to subshells (setup_ needs this).
150 gl_set_x_corrupts_stderr_
=false
151 export gl_set_x_corrupts_stderr_
153 # Record the first marginally acceptable shell.
156 # Search for a shell that meets our requirements.
157 for re_shell_
in __current__
"${CONFIG_SHELL:-no_shell}" \
158 /bin
/sh bash dash zsh pdksh fail
160 test "$re_shell_" = no_shell
&& continue
162 # If we've made it all the way to the sentinel, "fail" without
163 # finding even a marginal shell, skip this test.
164 if test "$re_shell_" = fail
; then
165 test -z "$marginal_" && skip_ failed to
find an adequate shell
170 # When testing the current shell, simply "eval" the test code.
171 # Otherwise, run it via $re_shell_ -c ...
172 if test "$re_shell_" = __current__
; then
173 # 'eval'ing this code makes Solaris 10's /bin/sh exit with
174 # $? set to 2. It does not evaluate any of the code after the
175 # "unexpected" first '('. Thus, we must run it in a subshell.
176 ( eval "$gl_shell_test_script_" ) > /dev
/null
2>&1
178 "$re_shell_" -c "$gl_shell_test_script_" 2>/dev
/null
183 # $re_shell_ works just fine. Use it.
184 if test $st_ = 10; then
185 gl_set_x_corrupts_stderr_
=false
189 # If this is our first marginally acceptable shell, remember it.
190 if test "$st_:$marginal_" = 9: ; then
191 marginal_
="$re_shell_"
192 gl_set_x_corrupts_stderr_
=true
196 if test "$re_shell_" != __current__
; then
197 # Found a usable shell. Preserve -v and -x.
199 *v
*x
* |
*x
*v
*) opts_
=-vx ;;
204 exec "$re_shell_" $opts_ "$0" --no-reexec "$@"
205 echo "$ME_: exec failed" 1>&2
210 test -n "$EXEEXT" && shopt -s expand_aliases
212 # Enable glibc's malloc-perturbing option.
213 # This is useful for exposing code that depends on the fact that
214 # malloc-related functions often return memory that is mostly zeroed.
215 # If you have the time and cycles, use valgrind to do an even better job.
216 : ${MALLOC_PERTURB_=87}
217 export MALLOC_PERTURB_
219 # This is a stub function that is run upon trap (upon regular exit and
220 # interrupt). Override it with a per-test function, e.g., to unmount
221 # a partition, or to undo any other global state changes.
224 # Emit a header similar to that from diff -u; Print the simulated "diff"
225 # command so that the order of arguments is clear. Don't bother with @@ lines.
226 emit_diff_u_header_
()
228 printf '%s\n' "diff -u $*" \
229 "--- $1 1970-01-01" \
233 # Arrange not to let diff or cmp operate on /dev/null,
234 # since on some systems (at least OSF/1 5.1), that doesn't work.
235 # When there are not two arguments, or no argument is /dev/null, return 2.
236 # When one argument is /dev/null and the other is not empty,
237 # cat the nonempty file to stderr and return 1.
238 # Otherwise, return 0.
241 test $# = 2 ||
return 2
243 if test "x$1" = x
/dev
/null
; then
244 test -s "$2" ||
return 0
245 emit_diff_u_header_
"$@"; sed 's/^/+/' "$2"
249 if test "x$2" = x
/dev
/null
; then
250 test -s "$1" ||
return 0
251 emit_diff_u_header_
"$@"; sed 's/^/-/' "$1"
258 if diff_out_
=`exec 2>/dev/null; diff -u "$0" "$0" < /dev/null` \
259 && diff -u Makefile
"$0" 2>/dev
/null |
grep '^[+]#!' >/dev
/null
; then
260 # diff accepts the -u option and does not (like AIX 7 'diff') produce an
261 # extra space on column 1 of every content line.
262 if test -z "$diff_out_"; then
263 compare_
() { diff -u "$@"; }
267 if diff -u "$@" > diff.out
; then
268 # No differences were found, but Solaris 'diff' produces output
269 # "No differences encountered". Hide this output.
279 elif diff_out_
=`exec 2>/dev/null; diff -c "$0" "$0" < /dev/null`; then
280 if test -z "$diff_out_"; then
281 compare_
() { diff -c "$@"; }
285 if diff -c "$@" > diff.out
; then
286 # No differences were found, but AIX and HP-UX 'diff' produce output
287 # "No differences encountered" or "There are no differences between the
288 # files.". Hide this output.
298 elif ( cmp --version < /dev
/null
2>&1 |
grep GNU
) > /dev
/null
2>&1; then
299 compare_
() { cmp -s "$@"; }
301 compare_
() { cmp "$@"; }
304 # Usage: compare EXPECTED ACTUAL
306 # Given compare_dev_null_'s preprocessing, defer to compare_ if 2 or more.
307 # Otherwise, propagate $? to caller: any diffs have already been printed.
310 # This looks like it can be factored to use a simple "case $?"
311 # after unchecked compare_dev_null_ invocation, but that would
312 # fail in a "set -e" environment.
313 if compare_dev_null_
"$@"; then
323 # An arbitrary prefix to help distinguish test directories.
324 testdir_prefix_
() { printf gt
; }
326 # Run the user-overridable cleanup_ function, remove the temporary
327 # directory and exit with the incoming value of $?.
332 # cd out of the directory we're about to remove
333 cd "$initial_cwd_" ||
cd / ||
cd /tmp
334 chmod -R u
+rwx
"$test_dir_"
335 # If removal fails and exit status was to be 0, then change it to 1.
336 rm -rf "$test_dir_" ||
{ test $__st = 0 && __st
=1; }
340 # Given a directory name, DIR, if every entry in it that matches *.exe
341 # contains only the specified bytes (see the case stmt below), then print
342 # a space-separated list of those names and return 0. Otherwise, don't
343 # print anything and return 1. Naming constraints apply also to DIR.
344 find_exe_basenames_
()
350 for feb_file_
in $feb_dir_/*.exe
; do
351 # If there was no *.exe file, or there existed a file named "*.exe" that
352 # was deleted between the above glob expansion and the existence test
353 # below, just skip it.
354 test "x$feb_file_" = "x$feb_dir_/*.exe" && test ! -f "$feb_file_" \
356 # Exempt [.exe, since we can't create a function by that name, yet
357 # we can't invoke [ by PATH search anyways due to shell builtins.
358 test "x$feb_file_" = "x$feb_dir_/[.exe" && continue
360 *[!-a-zA-Z/0-9_.
+]*) feb_fail_
=1; break;;
361 *) # Remove leading file name components as well as the .exe suffix.
362 feb_file_
=${feb_file_##*/}
363 feb_file_
=${feb_file_%.exe}
364 feb_result_
="$feb_result_$feb_sp_$feb_file_";;
368 test $feb_fail_ = 0 && printf %s
"$feb_result_"
372 # Consider the files in directory, $1.
373 # For each file name of the form PROG.exe, create an alias named
374 # PROG that simply invokes PROG.exe, then return 0. If any selected
375 # file name or the directory name, $1, contains an unexpected character,
376 # define no alias and return 1.
382 *) echo "$0: unexpected \$EXEEXT value: $EXEEXT" 1>&2; return 1 ;;
385 base_names_
=`find_exe_basenames_ $1` \
386 ||
{ echo "$0 (exe_shim): skipping directory: $1" 1>&2; return 0; }
388 if test -n "$base_names_"; then
389 for base_
in $base_names_; do
390 alias "$base_"="$base_$EXEEXT"
397 # Use this function to prepend to PATH an absolute name for each
398 # specified, possibly-$initial_cwd_-relative, directory.
401 while test $# != 0; do
404 '') fail_
"invalid path dir: '$1'";;
405 /*) abs_path_dir_
=$path_dir_;;
406 *) abs_path_dir_
=`cd "$initial_cwd_/$path_dir_" && echo "$PWD"` \
407 || fail_
"invalid path dir: $path_dir_";;
409 case $abs_path_dir_ in
410 *:*) fail_
"invalid path dir: '$abs_path_dir_'";;
412 PATH
="$abs_path_dir_:$PATH"
414 # Create an alias, FOO, for each FOO.exe in this directory.
415 create_exe_shims_
"$abs_path_dir_" \
416 || fail_
"something failed (above): $abs_path_dir_"
424 if test "$VERBOSE" = yes; then
425 # Test whether set -x may cause the selected shell to corrupt an
426 # application's stderr. Many do, including zsh-4.3.10 and the /bin/sh
427 # from SunOS 5.11, OpenBSD 4.7 and Irix 5.x and 6.5.
428 # If enabling verbose output this way would cause trouble, simply
429 # issue a warning and refrain.
430 if $gl_set_x_corrupts_stderr_; then
431 warn_
"using SHELL=$SHELL with 'set -x' corrupts stderr"
440 pfx_
=`testdir_prefix_`
441 test_dir_
=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \
442 || fail_
"failed to create temporary directory in $initial_cwd_"
445 # As autoconf-generated configure scripts do, ensure that IFS
446 # is defined initially, so that saving and restoring $IFS works.
449 IFS
=" "" $gl_init_sh_nl_"
451 # This trap statement, along with a trap on 0 below, ensure that the
452 # temporary directory, $test_dir_, is removed upon exit as well as
453 # upon receipt of any of the listed signals.
454 for sig_
in 1 2 3 13 15; do
455 eval "trap 'Exit $(expr $sig_ + 128)' $sig_"
459 # Create a temporary directory, much like mktemp -d does.
460 # Written by Jim Meyering.
462 # Usage: mktempd_ /tmp phoey.XXXXXXXXXX
464 # First, try to use the mktemp program.
465 # Failing that, we'll roll our own mktemp-like function:
466 # - try to get random bytes from /dev/urandom
467 # - failing that, generate output from a combination of quickly-varying
468 # sources and gzip. Ignore non-varying gzip header, and extract
469 # "random" bits from there.
470 # - given those bits, map to file-name bytes using tr, and try to create
471 # the desired directory.
472 # - make only $MAX_TRIES_ attempts
474 # Helper function. Print $N pseudo-random bytes from a-zA-Z0-9.
479 # Maybe try openssl rand -base64 $n_prime_|tr '+/=\012' abcd first?
480 # But if they have openssl, they probably have mktemp, too.
482 chars_
=abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
483 dev_rand_
=/dev
/urandom
484 if test -r "$dev_rand_"; then
485 # Note: 256-length($chars_) == 194; 3 copies of $chars_ is 186 + 8 = 194.
486 dd ibs
=$n_ count
=1 if=$dev_rand_ 2>/dev
/null \
487 | LC_ALL
=C
tr -c $chars_ 01234567$chars_$chars_$chars_
491 n_plus_50_
=`expr $n_ + 50`
492 cmds_
='date; date +%N; free; who -a; w; ps auxww; ps ef; netstat -n'
493 data_
=` (eval "$cmds_") 2>&1 | gzip `
495 # Ensure that $data_ has length at least 50+$n_
497 len_
=`echo "$data_"|wc -c`
498 test $n_plus_50_ -le $len_ && break;
499 data_
=` (echo "$data_"; eval "$cmds_") 2>&1 | gzip `
503 |
dd bs
=1 skip
=50 count
=$n_ 2>/dev
/null \
504 | LC_ALL
=C
tr -c $chars_ 01234567$chars_$chars_$chars_
511 *) fail_
"Usage: mktempd_ DIR TEMPLATE";;
519 # Disallow any trailing slash on specified destdir:
520 # it would subvert the post-mktemp "case"-based destdir test.
523 */) fail_
"invalid destination dir: remove trailing slash(es)";;
529 "invalid template: $template_ (must have a suffix of at least 4 X's)";;
532 # First, try to use mktemp.
533 d
=`unset TMPDIR; { mktemp -d -t -p "$destdir_" "$template_"; } 2>/dev/null` \
536 # The resulting name must be in the specified directory.
537 case $d in "$destdir_"*);; *) fail
=1;; esac
539 # It must have created the directory.
540 test -d "$d" || fail
=1
542 # It must have 0700 permissions. Handle sticky "S" bits.
543 perms
=`ls -dgo "$d" 2>/dev/null|tr S -` || fail
=1
544 case $perms in drwx------
*) ;; *) fail
=1;; esac
551 # If we reach this point, we'll have to create a directory manually.
553 # Get a copy of the template without its suffix of X's.
554 base_template_
=`echo "$template_"|sed 's/XX*$//'`
556 # Calculate how many X's we've just removed.
557 template_length_
=`echo "$template_" | wc -c`
558 nx_
=`echo "$base_template_" | wc -c`
559 nx_
=`expr $template_length_ - $nx_`
564 X_
=`rand_bytes_ $nx_`
565 candidate_dir_
="$destdir_/$base_template_$X_"
566 err_
=`mkdir -m 0700 "$candidate_dir_" 2>&1` \
567 && { echo "$candidate_dir_"; return; }
568 test $MAX_TRIES_ -le $i_ && break;
574 # If you want to override the testdir_prefix_ function,
575 # or to add more utility functions, use this file.
576 test -f "$srcdir/init.cfg" \
577 && .
"$srcdir/init.cfg"
580 # This trap is here, rather than in the setup_ function, because some
581 # shells run the exit trap at shell function exit, rather than script exit.