crypt: Remove libcrypt support

[glibc.git] / manual / install.texi

@include macros.texi
@include pkgvers.texi

@ifclear plain
@node Installation, Maintenance, Library Summary, Top
@end ifclear

@c %MENU% How to install the GNU C Library
@appendix Installing @theglibc{}

Before you do anything else, you should read the FAQ at
@url{https://sourceware.org/glibc/wiki/FAQ}.  It answers common
questions and describes problems you may experience with compilation
and installation.

You will need recent versions of several GNU tools: definitely GCC and
GNU Make, and possibly others.  @xref{Tools for Compilation}, below.

@ifclear plain
@menu
* Configuring and compiling::   How to compile and test GNU libc.
* Running make install::        How to install it once you've got it
 compiled.
* Tools for Compilation::       You'll need these first.
* Linux::                       Specific advice for GNU/Linux systems.
* Reporting Bugs::              So they'll get fixed.
@end menu
@end ifclear

@node Configuring and compiling
@appendixsec Configuring and compiling @theglibc{}
@cindex configuring
@cindex compiling

@Theglibc{} cannot be compiled in the source directory.  You must build
it in a separate build directory.  For example, if you have unpacked
the @glibcadj{} sources in @file{/src/gnu/glibc-@var{version}},
create a directory
@file{/src/gnu/glibc-build} to put the object files in.  This allows
removing the whole build directory in case an error occurs, which is
the safest way to get a fresh start and should always be done.

From your object directory, run the shell script @file{configure} located
at the top level of the source tree.  In the scenario above, you'd type

@smallexample
$ ../glibc-@var{version}/configure @var{args@dots{}}
@end smallexample

Please note that even though you're building in a separate build
directory, the compilation may need to create or modify files and
directories in the source directory.

@noindent
@code{configure} takes many options, but the only one that is usually
mandatory is @samp{--prefix}.  This option tells @code{configure}
where you want @theglibc{} installed.  This defaults to @file{/usr/local},
but the normal setting to install as the standard system library is
@samp{--prefix=/usr} for @gnulinuxsystems{} and @samp{--prefix=} (an
empty prefix) for @gnuhurdsystems{}.

It may also be useful to pass @samp{CC=@var{compiler}} and
@code{CFLAGS=@var{flags}} arguments to @code{configure}.  @code{CC}
selects the C compiler that will be used, and @code{CFLAGS} sets
optimization options for the compiler.  Any compiler options required
for all compilations, such as options selecting an ABI or a processor
for which to generate code, should be included in @code{CC}.  Options
that may be overridden by the @glibcadj{} build system for particular
files, such as for optimization and debugging, should go in
@code{CFLAGS}.  The default value of @code{CFLAGS} is @samp{-g -O2},
and @theglibc{} cannot be compiled without optimization, so if
@code{CFLAGS} is specified it must enable optimization.  For example:

@smallexample
$ ../glibc-@var{version}/configure CC="gcc -m32" CFLAGS="-O3"
@end smallexample

The following list describes all of the available options for
 @code{configure}:

@table @samp
@item --prefix=@var{directory}
Install machine-independent data files in subdirectories of
@file{@var{directory}}.  The default is to install in @file{/usr/local}.

@item --exec-prefix=@var{directory}
Install the library and other machine-dependent files in subdirectories
of @file{@var{directory}}.  The default is to the @samp{--prefix}
directory if that option is specified, or @file{/usr/local} otherwise.

@item --with-headers=@var{directory}
Look for kernel header files in @var{directory}, not
@file{/usr/include}.  @Theglibc{} needs information from the kernel's header
files describing the interface to the kernel.  @Theglibc{} will normally
look in @file{/usr/include} for them,
but if you specify this option, it will look in @var{DIRECTORY} instead.

This option is primarily of use on a system where the headers in
@file{/usr/include} come from an older version of @theglibc{}.  Conflicts can
occasionally happen in this case.  You can also use this option if you want to
compile @theglibc{} with a newer set of kernel headers than the ones found in
@file{/usr/include}.

@item --enable-kernel=@var{version}
This option is currently only useful on @gnulinuxsystems{}.  The
@var{version} parameter should have the form X.Y.Z and describes the
smallest version of the Linux kernel the generated library is expected
to support.  The higher the @var{version} number is, the less
compatibility code is added, and the faster the code gets.

@item --with-binutils=@var{directory}
Use the binutils (assembler and linker) in @file{@var{directory}}, not
the ones the C compiler would default to.  You can use this option if
the default binutils on your system cannot deal with all the constructs
in @theglibc{}.  In that case, @code{configure} will detect the
problem and suppress these constructs, so that the library will still be
usable, but functionality may be lost---for example, you can't build a
shared libc with old binutils.

@item --with-nonshared-cflags=@var{cflags}
Use additional compiler flags @var{cflags} to build the parts of the
library which are always statically linked into applications and
libraries even with shared linking (that is, the object files contained
in @file{lib*_nonshared.a} libraries).  The build process will
automatically use the appropriate flags, but this option can be used to
set additional flags required for building applications and libraries,
to match local policy.  For example, if such a policy requires that all
code linked into applications must be built with source fortification,
@samp{--with-nonshared-cflags=-Wp,-D_FORTIFY_SOURCE=2} will make sure
that the objects in @file{libc_nonshared.a} are compiled with this flag
(although this will not affect the generated code in this particular
case and potentially change debugging information and metadata only).

@item --with-rtld-early-cflags=@var{cflags}
Use additional compiler flags @var{cflags} to build the early startup
code of the dynamic linker.  These flags can be used to enable early
dynamic linker diagnostics to run on CPUs which are not compatible with
the rest of @theglibc{}, for example, due to compiler flags which target
a later instruction set architecture (ISA).

@item --with-timeoutfactor=@var{NUM}
Specify an integer @var{NUM} to scale the timeout of test programs.
This factor can be changed at run time using @env{TIMEOUTFACTOR}
environment variable.

@c disable static doesn't work currently
@c @item --disable-static
@c Don't build static libraries.  Static libraries aren't that useful these
@c days, but we recommend you build them in case you need them.

@item --disable-shared
Don't build shared libraries even if it is possible.  Not all systems
support shared libraries; you need ELF support and (currently) the GNU
linker.

@item --disable-default-pie
Don't build glibc programs and the testsuite as position independent
executables (PIE).  By default, glibc programs and tests are created as
position independent executables on targets that support it.  If the toolchain
and architecture support it, static executables are built as static PIE and the
resulting glibc can be used with the GCC option, -static-pie, which is
available with GCC 8 or above, to create static PIE.

@item --enable-cet
@itemx --enable-cet=permissive
Enable Intel Control-flow Enforcement Technology (CET) support.  When
@theglibc{} is built with @option{--enable-cet} or
@option{--enable-cet=permissive}, the resulting library
is protected with indirect branch tracking (IBT) and shadow stack
(SHSTK)@.  When CET is enabled, @theglibc{} is compatible with all
existing executables and shared libraries.  This feature is currently
supported on i386, x86_64 and x32 with GCC 8 and binutils 2.29 or later.
Note that when CET is enabled, @theglibc{} requires CPUs capable of
multi-byte NOPs, like x86-64 processors as well as Intel Pentium Pro or
newer.  With @option{--enable-cet}, it is an error to dlopen a non CET
enabled shared library in CET enabled application.  With
@option{--enable-cet=permissive}, CET is disabled when dlopening a
non CET enabled shared library in CET enabled application.

NOTE: @option{--enable-cet} has been tested for i686, x86_64 and x32
on non-CET processors.  @option{--enable-cet} has been tested for
i686, x86_64 and x32 on CET processors.

@item --enable-memory-tagging
Enable memory tagging support if the architecture supports it.  When
@theglibc{} is built with this option then the resulting library will
be able to control the use of tagged memory when hardware support is
present by use of the tunable @samp{glibc.mem.tagging}.  This includes
the generation of tagged memory when using the @code{malloc} APIs.

At present only AArch64 platforms with MTE provide this functionality,
although the library will still operate (without memory tagging) on
older versions of the architecture.

The default is to disable support for memory tagging.

@item --disable-profile
Don't build libraries with profiling information.  You may want to use
this option if you don't plan to do profiling.

@item --enable-static-nss
Compile static versions of the NSS (Name Service Switch) libraries.
This is not recommended because it defeats the purpose of NSS; a program
linked statically with the NSS libraries cannot be dynamically
reconfigured to use a different name database.

@item --enable-hardcoded-path-in-tests
By default, dynamic tests are linked to run with the installed C library.
This option hardcodes the newly built C library path in dynamic tests
so that they can be invoked directly.

@item --disable-timezone-tools
By default, timezone related utilities (@command{zic}, @command{zdump},
and @command{tzselect}) are installed with @theglibc{}.  If you are building
these independently (e.g. by using the @samp{tzcode} package), then this
option will allow disabling the install of these.

Note that you need to make sure the external tools are kept in sync with
the versions that @theglibc{} expects as the data formats may change over
time.  Consult the @file{timezone} subdirectory for more details.

@item --enable-stack-protector
@itemx --enable-stack-protector=strong
@itemx --enable-stack-protector=all
Compile the C library and all other parts of the glibc package
(including the threading and math libraries, NSS modules, and
transliteration modules) using the GCC @option{-fstack-protector},
@option{-fstack-protector-strong} or @option{-fstack-protector-all}
options to detect stack overruns.  Only the dynamic linker and a small
number of routines called directly from assembler are excluded from this
protection.

@item --enable-bind-now
Disable lazy binding for installed shared objects and programs.  This
provides additional security hardening because it enables full RELRO
and a read-only global offset table (GOT), at the cost of slightly
increased program load times.

@pindex pt_chown
@findex grantpt
@item --enable-pt_chown
The file @file{pt_chown} is a helper binary for @code{grantpt}
(@pxref{Allocation, Pseudo-Terminals}) that is installed setuid root to
fix up pseudo-terminal ownership on GNU/Hurd.  It is not required on
GNU/Linux, and @theglibc{} will not use the installed @file{pt_chown}
program when configured with @option{--enable-pt_chown}.

@item --disable-werror
By default, @theglibc{} is built with @option{-Werror}.  If you wish
to build without this option (for example, if building with a newer
version of GCC than this version of @theglibc{} was tested with, so
new warnings cause the build with @option{-Werror} to fail), you can
configure with @option{--disable-werror}.

@item --disable-mathvec
By default for x86_64, @theglibc{} is built with the vector math library.
Use this option to disable the vector math library.

@item --enable-crypt
Install the legacy passphrase-hashing library @file{libcrypt} and the
header file @file{crypt.h}.  @file{unistd.h} will declare the function
@code{crypt} regardless of this option.  Using this option does not
change the set of programs that may need to be linked with
@option{-lcrypt}; it only means that @theglibc{} will provide that
library.

This option is for hackers and distributions who may not yet be able to
use libcrypt alternatives such as libxcrypt and need this legacy
implementation as a temporary workaround.  Note that libcrypt may be
removed in a future release.

@item --disable-scv
Disable using @code{scv} instruction for syscalls. All syscalls will use
@code{sc} instead, even if the kernel supports @code{scv}. PowerPC only.

@item --build=@var{build-system}
@itemx --host=@var{host-system}
These options are for cross-compiling.  If you specify both options and
@var{build-system} is different from @var{host-system}, @code{configure}
will prepare to cross-compile @theglibc{} from @var{build-system} to be used
on @var{host-system}.  You'll probably need the @samp{--with-headers}
option too, and you may have to override @var{configure}'s selection of
the compiler and/or binutils.

If you only specify @samp{--host}, @code{configure} will prepare for a
native compile but use what you specify instead of guessing what your
system is.  This is most useful to change the CPU submodel.  For example,
if @code{configure} guesses your machine as @code{i686-pc-linux-gnu} but
you want to compile a library for 586es, give
@samp{--host=i586-pc-linux-gnu} or just @samp{--host=i586-linux} and add
the appropriate compiler flags (@samp{-mcpu=i586} will do the trick) to
@code{CC}.

If you specify just @samp{--build}, @code{configure} will get confused.

@item --with-pkgversion=@var{version}
Specify a description, possibly including a build number or build
date, of the binaries being built, to be included in
@option{--version} output from programs installed with @theglibc{}.
For example, @option{--with-pkgversion='FooBar GNU/Linux glibc build
123'}.  The default value is @samp{GNU libc}.

@item --with-bugurl=@var{url}
Specify the URL that users should visit if they wish to report a bug,
to be included in @option{--help} output from programs installed with
@theglibc{}.  The default value refers to the main bug-reporting
information for @theglibc{}.

@item --enable-fortify-source
@itemx --enable-fortify-source=@var{LEVEL}
Use -D_FORTIFY_SOURCE=@option{LEVEL} to control hardening in the GNU C Library.
If not provided, @option{LEVEL} defaults to highest possible value supported by
the build compiler.

Default is to disable fortification.
@end table

To build the library and related programs, type @code{make}.  This will
produce a lot of output, some of which may look like errors from
@code{make} but aren't.  Look for error messages from @code{make}
containing @samp{***}.  Those indicate that something is seriously wrong.

The compilation process can take a long time, depending on the
configuration and the speed of your machine.  Some complex modules may
take a very long time to compile, as much as several minutes on slower
machines.  Do not panic if the compiler appears to hang.

If you want to run a parallel make, simply pass the @samp{-j} option
with an appropriate numeric parameter to @code{make}.  You need a recent
GNU @code{make} version, though.

To build and run test programs which exercise some of the library
facilities, type @code{make check}.  If it does not complete
successfully, do not use the built library, and report a bug after
verifying that the problem is not already known.  @xref{Reporting Bugs},
for instructions on reporting bugs.  Note that some of the tests assume
they are not being run by @code{root}.  We recommend you compile and
test @theglibc{} as an unprivileged user.

Before reporting bugs make sure there is no problem with your system.
The tests (and later installation) use some pre-existing files of the
system such as @file{/etc/passwd}, @file{/etc/nsswitch.conf} and others.
These files must all contain correct and sensible content.

Normally, @code{make check} will run all the tests before reporting
all problems found and exiting with error status if any problems
occurred.  You can specify @samp{stop-on-test-failure=y} when running
@code{make check} to make the test run stop and exit with an error
status immediately when a failure occurs.

To format the @cite{GNU C Library Reference Manual} for printing, type
@w{@code{make dvi}}.  You need a working @TeX{} installation to do
this.  The distribution builds the on-line formatted version of the
manual, as Info files, as part of the build process.  You can build
them manually with @w{@code{make info}}.

The library has a number of special-purpose configuration parameters
which you can find in @file{Makeconfig}.  These can be overwritten with
the file @file{configparms}.  To change them, create a
@file{configparms} in your build directory and add values as appropriate
for your system.  The file is included and parsed by @code{make} and has
to follow the conventions for makefiles.

It is easy to configure @theglibc{} for cross-compilation by
setting a few variables in @file{configparms}.  Set @code{CC} to the
cross-compiler for the target you configured the library for; it is
important to use this same @code{CC} value when running
@code{configure}, like this: @samp{configure @var{target}
CC=@var{target}-gcc}.  Set @code{BUILD_CC} to the compiler to use for programs
run on the build system as part of compiling the library.  You may need to
set @code{AR} to cross-compiling versions of @code{ar}
if the native tools are not configured to work with
object files for the target you configured for.  When cross-compiling
@theglibc{}, it may be tested using @samp{make check
test-wrapper="@var{srcdir}/scripts/cross-test-ssh.sh @var{hostname}"},
where @var{srcdir} is the absolute directory name for the main source
directory and @var{hostname} is the host name of a system that can run
the newly built binaries of @theglibc{}.  The source and build
directories must be visible at the same locations on both the build
system and @var{hostname}.
The @samp{cross-test-ssh.sh} script requires @samp{flock} from
@samp{util-linux} to work when @var{glibc_test_allow_time_setting}
environment variable is set.

It is also possible to execute tests, which require setting the date on
the target machine.  Following use cases are supported:
@itemize @bullet
@item
@code{GLIBC_TEST_ALLOW_TIME_SETTING} is set in the environment in
which eligible tests are executed and have the privilege to run
@code{clock_settime}.  In this case, nothing prevents those tests from
running in parallel, so the caller shall assure that those tests
are serialized or provide a proper wrapper script for them.

@item
The @code{cross-test-ssh.sh} script is used and one passes the
@option{--allow-time-setting} flag.  In this case, both sets
@code{GLIBC_TEST_ALLOW_TIME_SETTING} and serialization of test
execution are assured automatically.
@end itemize

In general, when testing @theglibc{}, @samp{test-wrapper} may be set
to the name and arguments of any program to run newly built binaries.
This program must preserve the arguments to the binary being run, its
working directory and the standard input, output and error file
descriptors.  If @samp{@var{test-wrapper} env} will not work to run a
program with environment variables set, then @samp{test-wrapper-env}
must be set to a program that runs a newly built program with
environment variable assignments in effect, those assignments being
specified as @samp{@var{var}=@var{value}} before the name of the
program to be run.  If multiple assignments to the same variable are
specified, the last assignment specified must take precedence.
Similarly, if @samp{@var{test-wrapper} env -i} will not work to run a
program with an environment completely empty of variables except those
directly assigned, then @samp{test-wrapper-env-only} must be set; its
use has the same syntax as @samp{test-wrapper-env}, the only
difference in its semantics being starting with an empty set of
environment variables rather than the ambient set.

For AArch64 with SVE, when testing @theglibc{}, @samp{test-wrapper}
may be set to "@var{srcdir}/sysdeps/unix/sysv/linux/aarch64/vltest.py
@var{vector-length}" to change Vector Length.

@node Running make install
@appendixsec Installing the C Library
@cindex installing

To install the library and its header files, and the Info files of the
manual, type @code{make install}.  This will
build things, if necessary, before installing them; however, you should
still compile everything first.  If you are installing @theglibc{} as your
primary C library, we recommend that you shut the system down to
single-user mode first, and reboot afterward.  This minimizes the risk
of breaking things when the library changes out from underneath.

@samp{make install} will do the entire job of upgrading from a
previous installation of @theglibc{} version 2.x.  There may sometimes
be headers
left behind from the previous installation, but those are generally
harmless.  If you want to avoid leaving headers behind you can do
things in the following order.

You must first build the library (@samp{make}), optionally check it
(@samp{make check}), switch the include directories and then install
(@samp{make install}).  The steps must be done in this order.  Not moving
the directory before install will result in an unusable mixture of header
files from both libraries, but configuring, building, and checking the
library requires the ability to compile and run programs against the old
library.  The new @file{/usr/include}, after switching the include
directories and before installing the library should contain the Linux
headers, but nothing else.  If you do this, you will need to restore
any headers from libraries other than @theglibc{} yourself after installing the
library.

You can install @theglibc{} somewhere other than where you configured
it to go by setting the @code{DESTDIR} GNU standard make variable on
the command line for @samp{make install}.  The value of this variable
is prepended to all the paths for installation.  This is useful when
setting up a chroot environment or preparing a binary distribution.
The directory should be specified with an absolute file name. Installing
with the @code{prefix} and @code{exec_prefix} GNU standard make variables
set is not supported.

@Theglibc{} includes a daemon called @code{nscd}, which you
may or may not want to run.  @code{nscd} caches name service lookups; it
can dramatically improve performance with NIS+, and may help with DNS as
well.

One auxiliary program, @file{/usr/libexec/pt_chown}, is installed setuid
@code{root} if the @samp{--enable-pt_chown} configuration option is used.
This program is invoked by the @code{grantpt} function; it sets the
permissions on a pseudoterminal so it can be used by the calling process.
If you are using a Linux kernel with the @code{devpts} filesystem enabled
and mounted at @file{/dev/pts}, you don't need this program.

After installation you should configure the timezone and install locales
for your system.  The time zone configuration ensures that your system
time matches the time for your current timezone.  The locales ensure that
the display of information on your system matches the expectations of
your language and geographic region.

@Theglibc{} is able to use two kinds of localization information sources, the
first is a locale database named @file{locale-archive} which is generally
installed as @file{/usr/lib/locale/locale-archive}.  The locale archive has the
benefit of taking up less space and being very fast to load, but only if you
plan to install sixty or more locales.  If you plan to install one or two
locales you can instead install individual locales into their self-named
directories e.g.@: @file{/usr/lib/locale/en_US.utf8}.  For example to install
the German locale using the character set for UTF-8 with name @code{de_DE} into
the locale archive issue the command @samp{localedef -i de_DE -f UTF-8 de_DE},
and to install just the one locale issue the command @samp{localedef
--no-archive -i de_DE -f UTF-8 de_DE}.  To configure all locales that are
supported by @theglibc{}, you can issue from your build directory the command
@samp{make localedata/install-locales} to install all locales into the locale
archive or @samp{make localedata/install-locale-files} to install all locales
as files in the default configured locale installation directory (derived from
@samp{--prefix} or @code{--localedir}).  To install into an alternative system
root use @samp{DESTDIR} e.g.@: @samp{make localedata/install-locale-files
DESTDIR=/opt/glibc}, but note that this does not change the configured prefix.

To configure the locally used timezone, set the @code{TZ} environment
variable.  The script @code{tzselect} helps you to select the right value.
As an example, for Germany, @code{tzselect} would tell you to use
@samp{TZ='Europe/Berlin'}.  For a system wide installation (the given
paths are for an installation with @samp{--prefix=/usr}), link the
timezone file which is in @file{/usr/share/zoneinfo} to the file
@file{/etc/localtime}.  For Germany, you might execute @samp{ln -s
/usr/share/zoneinfo/Europe/Berlin /etc/localtime}.

@node Tools for Compilation
@appendixsec Recommended Tools for Compilation
@cindex installation tools
@cindex tools, for installing library

We recommend installing the following GNU tools before attempting to
build @theglibc{}:

@itemize @bullet
@item
GNU @code{make} 4.0 or newer

As of release time, GNU @code{make} 4.4 is the newest verified to work
to build @theglibc{}.

@item
GCC 6.2 or newer

GCC 6.2 or higher is required.  In general it is recommended to use
the newest version of the compiler that is known to work for building
@theglibc{}, as newer compilers usually produce better code.  As of
release time, GCC 13.2 is the newest compiler verified to work to build
@theglibc{}.

For PowerPC 64-bits little-endian (powerpc64le), a GCC version with support
for @option{-mno-gnu-attribute}, @option{-mabi=ieeelongdouble}, and
@option{-mabi=ibmlondouble} is required.  Likewise, the compiler must also
support passing @option{-mlong-double-128} with the preceding options.  As
of release, this implies GCC 7.4 and newer (excepting GCC 7.5.0, see GCC
PR94200).  These additional features are required for building the GNU C
Library with support for IEEE long double.

@c powerpc64le performs an autoconf test to verify the compiler compiles with
@c commands like "$CC -c foo.c -mabi=ibmlongdouble -mlong-double-128".

For ARC architecture builds, GCC 8.3 or higher is needed.

For s390x architecture builds, GCC 7.1 or higher is needed (See gcc Bug 98269).

For AArch64 architecture builds with mathvec enabled, GCC 10 or higher is needed
due to dependency on arm_sve.h.

For multi-arch support it is recommended to use a GCC which has been built with
support for GNU indirect functions.  This ensures that correct debugging
information is generated for functions selected by IFUNC resolvers.  This
support can either be enabled by configuring GCC with
@samp{--enable-gnu-indirect-function}, or by enabling it by default by setting
@samp{default_gnu_indirect_function} variable for a particular architecture in
the GCC source file @file{gcc/config.gcc}.

You can use whatever compiler you like to compile programs that use
@theglibc{}.

Check the FAQ for any special compiler issues on particular platforms.

@item
GNU @code{binutils} 2.25 or later

You must use GNU @code{binutils} (as and ld) to build @theglibc{}.
No other assembler or linker has the necessary functionality at the
moment. As of release time, GNU @code{binutils} 2.41 is the newest
verified to work to build @theglibc{}.

For PowerPC 64-bits little-endian (powerpc64le), @command{objcopy} is required
to support @option{--update-section}.  This option requires binutils 2.26 or
newer.

ARC architecture needs @code{binutils} 2.32 or higher for TLS related fixes.

@item
GNU @code{texinfo} 4.7 or later

To correctly translate and install the Texinfo documentation you need
this version of the @code{texinfo} package.  Earlier versions do not
understand all the tags used in the document, and the installation
mechanism for the info files is not present or works differently.
As of release time, @code{texinfo} 7.0.3 is the newest verified to work
to build @theglibc{}.

@item
GNU @code{awk} 3.1.2, or higher

@code{awk} is used in several places to generate files.
Some @code{gawk} extensions are used, including the @code{asorti}
function, which was introduced in version 3.1.2 of @code{gawk}.
As of release time, @code{gawk} version 5.2.2 is the newest verified
to work to build @theglibc{}.

@item
GNU @code{bison} 2.7 or later

@code{bison} is used to generate the @code{yacc} parser code in the @file{intl}
subdirectory.  As of release time, @code{bison} version 3.8.2 is the newest
verified to work to build @theglibc{}.

@item
Perl 5

Perl is not required, but if present it is used in some tests and the
@code{mtrace} program, to build the @glibcadj{} manual.  As of release
time @code{perl} version 5.38.0 is the newest verified to work to
build @theglibc{}.

@item
GNU @code{sed} 3.02 or newer

@code{Sed} is used in several places to generate files.  Most scripts work
with any version of @code{sed}.  As of release time, @code{sed} version
4.9 is the newest verified to work to build @theglibc{}.

@item
Python 3.4 or later

Python is required to build @theglibc{}.  As of release time, Python
3.11 is the newest verified to work for building and testing
@theglibc{}.

@item PExpect 4.0

The pretty printer tests drive GDB through test programs and compare
its output to the printers'.  PExpect is used to capture the output of
GDB, and should be compatible with the Python version in your system.
As of release time PExpect 4.8.0 is the newest verified to work to test
the pretty printers.

@item
The Python @code{abnf} module.

This module is optional and used to verify some ABNF grammars in the
manual.  Version 2.2.0 has been confirmed to work as expected.  A
missing @code{abnf} module does not reduce the test coverage of the
library itself.

@item
GDB 7.8 or later with support for Python 2.7/3.4 or later

GDB itself needs to be configured with Python support in order to use
the pretty printers.  Notice that your system having Python available
doesn't imply that GDB supports it, nor that your system's Python and
GDB's have the same version.  As of release time GNU @code{debugger}
13.2 is the newest verified to work to test the pretty printers.

Unless Python, PExpect and GDB with Python support are present, the
printer tests will report themselves as @code{UNSUPPORTED}.  Notice
that some of the printer tests require @theglibc{} to be compiled with
debugging symbols.
@end itemize

@noindent
If you change any of the @file{configure.ac} files you will also need

@itemize @bullet
@item
GNU @code{autoconf} 2.71 (exactly)
@end itemize

@noindent
and if you change any of the message translation files you will need

@itemize @bullet
@item
GNU @code{gettext} 0.10.36 or later

As of release time, GNU @code{gettext} version 0.21.1 is the newest
version verified to work to build @theglibc{}.
@end itemize


@noindent
You may also need these packages if you upgrade your source tree using
patches, although we try to avoid this.

@node Linux
@appendixsec Specific advice for @gnulinuxsystems{}
@cindex kernel header files

If you are installing @theglibc{} on @gnulinuxsystems{}, you need to have
the header files from a 3.2 or newer kernel around for reference.
(For the ia64 architecture, you need version 3.2.18 or newer because this
is the first version with support for the @code{accept4} system call.)
These headers must be installed using @samp{make headers_install}; the
headers present in the kernel source directory are not suitable for
direct use by @theglibc{}.  You do not need to use that kernel, just have
its headers installed where @theglibc{} can access them, referred to here as
@var{install-directory}.  The easiest way to do this is to unpack it
in a directory such as @file{/usr/src/linux-@var{version}}.  In that
directory, run @samp{make headers_install
INSTALL_HDR_PATH=@var{install-directory}}.  Finally, configure @theglibc{}
with the option @samp{--with-headers=@var{install-directory}/include}.
Use the most recent kernel you can get your hands on.  (If you are
cross-compiling @theglibc{}, you need to specify
@samp{ARCH=@var{architecture}} in the @samp{make headers_install}
command, where @var{architecture} is the architecture name used by the
Linux kernel, such as @samp{x86} or @samp{powerpc}.)

After installing @theglibc{}, you may need to remove or rename
directories such as @file{/usr/include/linux} and
@file{/usr/include/asm}, and replace them with copies of directories
such as @file{linux} and @file{asm} from
@file{@var{install-directory}/include}.  All directories present in
@file{@var{install-directory}/include} should be copied, except that
@theglibc{} provides its own version of @file{/usr/include/scsi}; the
files provided by the kernel should be copied without replacing those
provided by @theglibc{}.  The @file{linux}, @file{asm} and
@file{asm-generic} directories are required to compile programs using
@theglibc{}; the other directories describe interfaces to the kernel but
are not required if not compiling programs using those interfaces.
You do not need to copy kernel headers if you did not specify an
alternate kernel header source using @samp{--with-headers}.

The Filesystem Hierarchy Standard for @gnulinuxsystems{} expects some
components of the @glibcadj{} installation to be in
@file{/lib} and some in @file{/usr/lib}.  This is handled automatically
if you configure @theglibc{} with @samp{--prefix=/usr}.  If you set some other
prefix or allow it to default to @file{/usr/local}, then all the
components are installed there.

As of release time, Linux version 6.1.5 is the newest stable version verified
to work to build @theglibc{}.

@node Reporting Bugs
@appendixsec Reporting Bugs
@cindex reporting bugs
@cindex bugs, reporting

There are probably bugs in @theglibc{}.  There are certainly
errors and omissions in this manual.  If you report them, they will get
fixed.  If you don't, no one will ever know about them and they will
remain unfixed for all eternity, if not longer.

It is a good idea to verify that the problem has not already been
reported.  Bugs are documented in two places: The file @file{BUGS}
describes a number of well known bugs and the central @glibcadj{}
bug tracking system has a
WWW interface at
@url{https://sourceware.org/bugzilla/}.  The WWW
interface gives you access to open and closed reports.  A closed report
normally includes a patch or a hint on solving the problem.

To report a bug, first you must find it.  With any luck, this will be the
hard part.  Once you've found a bug, make sure it's really a bug.  A
good way to do this is to see if @theglibc{} behaves the same way
some other C library does.  If so, probably you are wrong and the
libraries are right (but not necessarily).  If not, one of the libraries
is probably wrong.  It might not be @theglibc{}.  Many historical
Unix C libraries permit things that we don't, such as closing a file
twice.

If you think you have found some way in which @theglibc{} does not
conform to the ISO and POSIX standards (@pxref{Standards and
Portability}), that is definitely a bug.  Report it!

Once you're sure you've found a bug, try to narrow it down to the
smallest test case that reproduces the problem.  In the case of a C
library, you really only need to narrow it down to one library
function call, if possible.  This should not be too difficult.

The final step when you have a simple test case is to report the bug.
Do this at @value{REPORT_BUGS_TO}.

If you are not sure how a function should behave, and this manual
doesn't tell you, that's a bug in the manual.  Report that too!  If the
function's behavior disagrees with the manual, then either the library
or the manual has a bug, so report the disagreement.  If you find any
errors or omissions in this manual, please report them to the
bug database.  If you refer to specific
sections of the manual, please include the section names for easier
identification.