bits/termios.h

   1 /* termios type and macro definitions.  4.4 BSD/generic GNU version.
   2    Copyright (C) 1993-2014 Free Software Foundation, Inc.
   3    This file is part of the GNU C Library.
   4
   5    The GNU C Library is free software; you can redistribute it and/or
   6    modify it under the terms of the GNU Lesser General Public
   7    License as published by the Free Software Foundation; either
   8    version 2.1 of the License, or (at your option) any later version.
   9
  10    The GNU C Library is distributed in the hope that it will be useful,
  11    but WITHOUT ANY WARRANTY; without even the implied warranty of
  12    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  13    Lesser General Public License for more details.
  14
  15    You should have received a copy of the GNU Lesser General Public
  16    License along with the GNU C Library; if not, see
  17    <http://www.gnu.org/licenses/>.  */
  18
  19 #ifndef _TERMIOS_H
  20 # error "Never include <bits/termios.h> directly; use <termios.h> instead."
  21 #endif
  22
  23 /* These macros are also defined in some <bits/ioctls.h> files (with
  24    numerically identical values), but this serves to shut up cpp's
  25    complaining. */
  26 #if defined __USE_MISC || defined __USE_XOPEN
  27
  28 # ifdef NL0
  29 #  undef NL0
  30 # endif
  31 # ifdef NL1
  32 #  undef NL1
  33 # endif
  34 # ifdef TAB0
  35 #  undef TAB0
  36 # endif
  37 # ifdef TAB1
  38 #  undef TAB1
  39 # endif
  40 # ifdef TAB2
  41 #  undef TAB2
  42 # endif
  43 # ifdef CR0
  44 #  undef CR0
  45 # endif
  46 # ifdef CR1
  47 #  undef CR1
  48 # endif
  49 # ifdef CR2
  50 #  undef CR2
  51 # endif
  52 # ifdef CR3
  53 #  undef CR3
  54 # endif
  55 # ifdef FF0
  56 #  undef FF0
  57 # endif
  58 # ifdef FF1
  59 #  undef FF1
  60 # endif
  61 # ifdef BS0
  62 #  undef BS0
  63 # endif
  64 # ifdef BS1
  65 #  undef BS1
  66 # endif
  67
  68 #endif /* __USE_MISC || __USE_XOPEN */
  69
  70 #ifdef __USE_BSD
  71
  72 # ifdef MDMBUF
  73 #  undef MDMBUF
  74 # endif
  75 # ifdef FLUSHO
  76 #  undef FLUSHO
  77 # endif
  78 # ifdef PENDIN
  79 #  undef PENDIN
  80 # endif
  81
  82 #endif /* __USE_BSD */
  83
  84 #ifdef ECHO
  85 # undef ECHO
  86 #endif
  87 #ifdef TOSTOP
  88 # undef TOSTOP
  89 #endif
  90 #ifdef NOFLSH
  91 # undef NOFLSH
  92 #endif
  93
  94
  95 /* These definitions match those used by the 4.4 BSD kernel.
  96    If the operating system has termios system calls or ioctls that
  97    correctly implement the POSIX.1 behavior, there should be a
  98    system-dependent version of this file that defines `struct termios',
  99    `tcflag_t', `cc_t', `speed_t' and the `TC*' constants appropriately.  */
 100
 101 /* Type of terminal control flag masks.  */
 102 typedef unsigned long int tcflag_t;
 103
 104 /* Type of control characters.  */
 105 typedef unsigned char cc_t;
 106
 107 /* Type of baud rate specifiers.  */
 108 typedef long int speed_t;
 109
 110 /* Terminal control structure.  */
 111 struct termios
 112 {
 113   /* Input modes.  */
 114   tcflag_t c_iflag;
 115 #define IGNBRK  (1 << 0)        /* Ignore break condition.  */
 116 #define BRKINT  (1 << 1)        /* Signal interrupt on break.  */
 117 #define IGNPAR  (1 << 2)        /* Ignore characters with parity errors.  */
 118 #define PARMRK  (1 << 3)        /* Mark parity and framing errors.  */
 119 #define INPCK   (1 << 4)        /* Enable input parity check.  */
 120 #define ISTRIP  (1 << 5)        /* Strip 8th bit off characters.  */
 121 #define INLCR   (1 << 6)        /* Map NL to CR on input.  */
 122 #define IGNCR   (1 << 7)        /* Ignore CR.  */
 123 #define ICRNL   (1 << 8)        /* Map CR to NL on input.  */
 124 #define IXON    (1 << 9)        /* Enable start/stop output control.  */
 125 #define IXOFF   (1 << 10)       /* Enable start/stop input control.  */
 126 #if defined __USE_BSD || defined __USE_UNIX98
 127 # define IXANY  (1 << 11)       /* Any character will restart after stop.  */
 128 #endif
 129 #ifdef  __USE_BSD
 130 # define IMAXBEL (1 << 13)      /* Ring bell when input queue is full.  */
 131 #endif
 132 #ifdef __USE_GNU
 133 # define IUCLC  (1 << 14)       /* Translate upper case input to lower case. */
 134 #endif
 135
 136   /* Output modes.  */
 137   tcflag_t c_oflag;
 138 #define OPOST   (1 << 0)        /* Perform output processing.  */
 139 #if defined __USE_BSD || defined __USE_XOPEN
 140 # define ONLCR  (1 << 1)        /* Map NL to CR-NL on output.  */
 141 #endif
 142 #ifdef  __USE_BSD
 143 # define OXTABS TAB3            /* Expand tabs to spaces.  */
 144 # define ONOEOT (1 << 3)        /* Discard EOT (^D) on output.  */
 145 #endif
 146 #if defined __USE_BSD || defined __USE_XOPEN
 147 # define OCRNL  (1 << 4)        /* Map CR to NL.  */
 148 # define ONOCR  (1 << 5)        /* Discard CR's when on column 0.  */
 149 # define ONLRET (1 << 6)        /* Move to column 0 on NL.  */
 150 #endif
 151 #if defined __USE_MISC || defined __USE_XOPEN
 152 # define NLDLY  (3 << 8)        /* NL delay.  */
 153 # define NL0    (0 << 8)        /* NL type 0.  */
 154 # define NL1    (1 << 8)        /* NL type 1.  */
 155 # define TABDLY (3 << 10)       /* TAB delay.  */
 156 # define TAB0   (0 << 10)       /* TAB delay type 0.  */
 157 # define TAB1   (1 << 10)       /* TAB delay type 1.  */
 158 # define TAB2   (2 << 10)       /* TAB delay type 2.  */
 159 # define TAB3   (1 << 2)        /* Expand tabs to spaces.  */
 160 # define CRDLY  (3 << 12)       /* CR delay.  */
 161 # define CR0    (0 << 12)       /* CR delay type 0.  */
 162 # define CR1    (1 << 12)       /* CR delay type 1.  */
 163 # define CR2    (2 << 12)       /* CR delay type 2.  */
 164 # define CR3    (3 << 12)       /* CR delay type 3.  */
 165 # define FFDLY  (1 << 14)       /* FF delay.  */
 166 # define FF0    (0 << 14)       /* FF delay type 0.  */
 167 # define FF1    (1 << 14)       /* FF delay type 1.  */
 168 # define BSDLY  (1 << 15)       /* BS delay.  */
 169 # define BS0    (0 << 15)       /* BS delay type 0.  */
 170 # define BS1    (1 << 15)       /* BS delay type 1.  */
 171 # define VTDLY  (1 << 16)       /* VT delay.  */
 172 # define VT0    (0 << 16)       /* VT delay type 0.  */
 173 # define VT1    (1 << 16)       /* VT delay type 1.  */
 174 #endif /* __USE_MISC || __USE_XOPEN */
 175 #ifdef __USE_GNU
 176 # define OLCUC  (1 << 17)       /* Translate lower case output to upper case */
 177 #endif
 178 #ifdef __USE_XOPEN
 179 # define OFILL  (1 << 18)       /* Send fill characters for delays.  */
 180 #endif
 181
 182   /* Control modes.  */
 183   tcflag_t c_cflag;
 184 #ifdef  __USE_BSD
 185 # define CIGNORE        (1 << 0)        /* Ignore these control flags.  */
 186 #endif
 187 #define CSIZE   (CS5|CS6|CS7|CS8)       /* Number of bits per byte (mask).  */
 188 #define CS5     0               /* 5 bits per byte.  */
 189 #define CS6     (1 << 8)        /* 6 bits per byte.  */
 190 #define CS7     (1 << 9)        /* 7 bits per byte.  */
 191 #define CS8     (CS6|CS7)       /* 8 bits per byte.  */
 192 #define CSTOPB  (1 << 10)       /* Two stop bits instead of one.  */
 193 #define CREAD   (1 << 11)       /* Enable receiver.  */
 194 #define PARENB  (1 << 12)       /* Parity enable.  */
 195 #define PARODD  (1 << 13)       /* Odd parity instead of even.  */
 196 #define HUPCL   (1 << 14)       /* Hang up on last close.  */
 197 #define CLOCAL  (1 << 15)       /* Ignore modem status lines.  */
 198 #ifdef  __USE_BSD
 199 # define CRTSCTS        (1 << 16)       /* RTS/CTS flow control.  */
 200 # define CRTS_IFLOW     CRTSCTS         /* Compatibility.  */
 201 # define CCTS_OFLOW     CRTSCTS         /* Compatibility.  */
 202 # define CDTRCTS        (1 << 17)       /* DTR/CTS flow control.  */
 203 # define MDMBUF         (1 << 20)       /* DTR/DCD flow control.  */
 204 # define CHWFLOW        (MDMBUF|CRTSCTS|CDTRCTS) /* All types of flow control.  */
 205 #endif
 206
 207   /* Local modes.  */
 208   tcflag_t c_lflag;
 209 #ifdef  __USE_BSD
 210 # define ECHOKE (1 << 0)        /* Visual erase for KILL.  */
 211 #endif
 212 #define _ECHOE  (1 << 1)        /* Visual erase for ERASE.  */
 213 #define ECHOE   _ECHOE
 214 #define _ECHOK  (1 << 2)        /* Echo NL after KILL.  */
 215 #define ECHOK   _ECHOK
 216 #define _ECHO   (1 << 3)        /* Enable echo.  */
 217 #define ECHO    _ECHO
 218 #define _ECHONL (1 << 4)        /* Echo NL even if ECHO is off.  */
 219 #define ECHONL  _ECHONL
 220 #ifdef  __USE_BSD
 221 # define ECHOPRT        (1 << 5)        /* Hardcopy visual erase.  */
 222 # define ECHOCTL        (1 << 6)        /* Echo control characters as ^X.  */
 223 #endif
 224 #define _ISIG   (1 << 7)        /* Enable signals.  */
 225 #define ISIG    _ISIG
 226 #define _ICANON (1 << 8)        /* Do erase and kill processing.  */
 227 #define ICANON  _ICANON
 228 #ifdef  __USE_BSD
 229 # define ALTWERASE (1 << 9)     /* Alternate WERASE algorithm.  */
 230 #endif
 231 #define _IEXTEN (1 << 10)       /* Enable DISCARD and LNEXT.  */
 232 #define IEXTEN  _IEXTEN
 233 #define EXTPROC (1 << 11)       /* External processing.  */
 234 #define _TOSTOP (1 << 22)       /* Send SIGTTOU for background output.  */
 235 #define TOSTOP  _TOSTOP
 236 #ifdef  __USE_BSD
 237 # define FLUSHO (1 << 23)       /* Output being flushed (state).  */
 238 # define NOKERNINFO (1 << 25)   /* Disable VSTATUS.  */
 239 # define PENDIN (1 << 29)       /* Retype pending input (state).  */
 240 #endif
 241 #define _NOFLSH (1 << 31)       /* Disable flush after interrupt.  */
 242 #define NOFLSH  _NOFLSH
 243
 244   /* Control characters.  */
 245 #define VEOF    0               /* End-of-file character [ICANON].  */
 246 #define VEOL    1               /* End-of-line character [ICANON].  */
 247 #ifdef  __USE_BSD
 248 # define VEOL2  2               /* Second EOL character [ICANON].  */
 249 #endif
 250 #define VERASE  3               /* Erase character [ICANON].  */
 251 #ifdef  __USE_BSD
 252 # define VWERASE        4               /* Word-erase character [ICANON].  */
 253 #endif
 254 #define VKILL   5               /* Kill-line character [ICANON].  */
 255 #ifdef  __USE_BSD
 256 # define VREPRINT 6             /* Reprint-line character [ICANON].  */
 257 #endif
 258 #define VINTR   8               /* Interrupt character [ISIG].  */
 259 #define VQUIT   9               /* Quit character [ISIG].  */
 260 #define VSUSP   10              /* Suspend character [ISIG].  */
 261 #ifdef  __USE_BSD
 262 # define VDSUSP 11              /* Delayed suspend character [ISIG].  */
 263 #endif
 264 #define VSTART  12              /* Start (X-ON) character [IXON, IXOFF].  */
 265 #define VSTOP   13              /* Stop (X-OFF) character [IXON, IXOFF].  */
 266 #ifdef  __USE_BSD
 267 # define VLNEXT 14              /* Literal-next character [IEXTEN].  */
 268 # define VDISCARD 15            /* Discard character [IEXTEN].  */
 269 #endif
 270 #define VMIN    16              /* Minimum number of bytes read at once [!ICANON].  */
 271 #define VTIME   17              /* Time-out value (tenths of a second) [!ICANON].  */
 272 #ifdef  __USE_BSD
 273 # define VSTATUS        18              /* Status character [ICANON].  */
 274 #endif
 275 #define NCCS    20              /* Value duplicated in <hurd/tioctl.defs>.  */
 276   cc_t c_cc[NCCS];
 277
 278   /* Input and output baud rates.  */
 279   speed_t __ispeed, __ospeed;
 280 #define B0      0               /* Hang up.  */
 281 #define B50     50              /* 50 baud.  */
 282 #define B75     75              /* 75 baud.  */
 283 #define B110    110             /* 110 baud.  */
 284 #define B134    134             /* 134.5 baud.  */
 285 #define B150    150             /* 150 baud.  */
 286 #define B200    200             /* 200 baud.  */
 287 #define B300    300             /* 300 baud.  */
 288 #define B600    600             /* 600 baud.  */
 289 #define B1200   1200            /* 1200 baud.  */
 290 #define B1800   1800            /* 1800 baud.  */
 291 #define B2400   2400            /* 2400 baud.  */
 292 #define B4800   4800            /* 4800 baud.  */
 293 #define B9600   9600            /* 9600 baud.  */
 294 #define B7200   7200            /* 7200 baud.  */
 295 #define B14400  14400           /* 14400 baud.  */
 296 #define B19200  19200           /* 19200 baud.  */
 297 #define B28800  28800           /* 28800 baud.  */
 298 #define B38400  38400           /* 38400 baud.  */
 299 #ifdef  __USE_MISC
 300 # define EXTA   19200
 301 # define EXTB   38400
 302 #endif
 303 #define B57600  57600
 304 #define B76800  76800
 305 #define B115200 115200
 306 #define B230400 230400
 307 #define B460800 460800
 308 #define B500000 500000
 309 #define B576000 576000
 310 #define B921600 921600
 311 #define B1000000 1000000
 312 #define B1152000 1152000
 313 #define B1500000 1500000
 314 #define B2000000 2000000
 315 #define B2500000 2500000
 316 #define B3000000 3000000
 317 #define B3500000 3500000
 318 #define B4000000 4000000
 319 };
 320
 321 #define _IOT_termios /* Hurd ioctl type field.  */ \
 322   _IOT (_IOTS (tcflag_t), 4, _IOTS (cc_t), NCCS, _IOTS (speed_t), 2)
 323
 324 /* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
 325 #define TCSANOW         0       /* Change immediately.  */
 326 #define TCSADRAIN       1       /* Change when pending output is written.  */
 327 #define TCSAFLUSH       2       /* Flush pending input before changing.  */
 328 #ifdef  __USE_BSD
 329 # define TCSASOFT       0x10    /* Flag: Don't alter hardware state.  */
 330 #endif
 331
 332 /* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
 333 #define TCIFLUSH        1       /* Discard data received but not yet read.  */
 334 #define TCOFLUSH        2       /* Discard data written but not yet sent.  */
 335 #define TCIOFLUSH       3       /* Discard all pending data.  */
 336
 337 /* Values for the ACTION argument to `tcflow'.  */
 338 #define TCOOFF  1               /* Suspend output.  */
 339 #define TCOON   2               /* Restart suspended output.  */
 340 #define TCIOFF  3               /* Send a STOP character.  */
 341 #define TCION   4               /* Send a START character.  */