Makefile

   1 # Copyright (C) 1991-2023 Free Software Foundation, Inc.
   2 # This file is part of the GNU C Library.
   3
   4 # The GNU C Library is free software; you can redistribute it and/or
   5 # modify it under the terms of the GNU Lesser General Public
   6 # License as published by the Free Software Foundation; either
   7 # version 2.1 of the License, or (at your option) any later version.
   8
   9 # The GNU C Library is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  12 # Lesser General Public License for more details.
  13
  14 # You should have received a copy of the GNU Lesser General Public
  15 # License along with the GNU C Library; if not, see
  16 # <https://www.gnu.org/licenses/>.
  17
  18 #
  19 #       Master Makefile for the GNU C library
  20 #
  21 ifneq (,)
  22 This makefile requires GNU Make.
  23 endif
  24
  25 include Makeconfig
  26
  27
  28 # This is the default target; it makes everything except the tests.
  29 .PHONY: all help minihelp
  30 all: minihelp lib others
  31
  32 help:
  33         @sed '0,/^help-starts-here$$/d' Makefile.help
  34
  35 minihelp:
  36         @echo
  37         @echo type \"make help\" for help with common glibc makefile targets
  38         @echo
  39
  40 \f
  41 ifneq ($(AUTOCONF),no)
  42
  43 define autoconf-it
  44 @-rm -f $@.new
  45 $(AUTOCONF) $(ACFLAGS) $< > $@.new
  46 chmod a-w$(patsubst %,$(comma)a+x,$(filter .,$(@D))) $@.new
  47 mv -f $@.new $@
  48 endef
  49
  50 configure: configure.ac aclocal.m4; $(autoconf-it)
  51 %/configure: %/configure.ac aclocal.m4; $(autoconf-it)
  52 %/preconfigure: %/preconfigure.ac aclocal.m4; $(autoconf-it)
  53
  54 endif # $(AUTOCONF) = no
  55
  56
  57 # We don't want to run anything here in parallel.
  58 .NOTPARALLEL:
  59
  60 # These are the targets that are made by making them in each subdirectory.
  61 +subdir_targets := subdir_lib objects objs others subdir_mostlyclean    \
  62                    subdir_clean subdir_distclean subdir_realclean       \
  63                    tests xtests                                         \
  64                    subdir_update-abi subdir_check-abi                   \
  65                    subdir_update-all-abi                                \
  66                    subdir_echo-headers                                  \
  67                    subdir_install                                       \
  68                    subdir_objs subdir_stubs subdir_testclean            \
  69                    $(addprefix install-, no-libc.a bin lib data headers others)
  70 \f
  71 headers := limits.h values.h features.h features-time64.h gnu-versions.h \
  72            bits/xopen_lim.h gnu/libc-version.h stdc-predef.h \
  73            bits/libc-header-start.h
  74
  75 echo-headers: subdir_echo-headers
  76
  77 # The headers are in the include directory.
  78 subdir-dirs = include
  79 vpath %.h $(subdir-dirs)
  80
  81 # What to install.
  82 install-others = $(inst_includedir)/gnu/stubs.h
  83 install-bin-script =
  84
  85 ifeq (yes,$(build-shared))
  86 headers += gnu/lib-names.h
  87 endif
  88
  89 include Makerules
  90
  91 ifeq ($(build-programs),yes)
  92 others: $(addprefix $(objpfx),$(install-bin-script))
  93 endif
  94
  95 # Install from subdirectories too.
  96 install: subdir_install
  97
  98 # Explicit dependency so that `make install-headers' works
  99 install-headers: install-headers-nosubdir
 100
 101 # Make sure that the dynamic linker is installed before libc.
 102 $(inst_slibdir)/libc-$(version).so: elf/ldso_install
 103
 104 .PHONY: elf/ldso_install
 105 elf/ldso_install:
 106         $(MAKE) -C $(@D) $(@F)
 107
 108 # Create links for shared libraries using the `ldconfig' program if possible.
 109 # Ignore the error if we cannot update /etc/ld.so.cache.
 110 ifeq (no,$(cross-compiling))
 111 ifeq (yes,$(build-shared))
 112 install:
 113         -test ! -x $(elf-objpfx)ldconfig || LC_ALL=C \
 114           $(elf-objpfx)ldconfig $(addprefix -r ,$(install_root)) \
 115                                 $(slibdir) $(libdir)
 116 ifneq (no,$(PERL))
 117 ifeq (/usr,$(prefix))
 118 ifeq (,$(install_root))
 119         LD_SO=$(ld.so-version) CC="$(CC)" $(PERL) scripts/test-installation.pl $(common-objpfx)
 120 endif
 121 endif
 122 endif
 123 endif
 124 endif
 125
 126 # Build subdirectory lib objects.
 127 lib-noranlib: subdir_lib
 128
 129 ifeq (yes,$(build-shared))
 130 # Build the shared object from the PIC object library.
 131 lib: $(common-objpfx)libc.so $(common-objpfx)linkobj/libc.so
 132 endif # $(build-shared)
 133
 134 # Used to build testrun.sh.
 135 define testrun-script
 136 #!/bin/bash
 137 builddir=`dirname "$$0"`
 138 GCONV_PATH="$${builddir}/iconvdata"
 139
 140 usage () {
 141 cat << EOF
 142 Usage: $$0 [OPTIONS] <program> [ARGUMENTS...]
 143
 144   --tool=TOOL  Run with the specified TOOL. It can be strace, rpctrace,
 145                valgrind or container. The container will run within
 146                support/test-container.  For strace and valgrind,
 147                additional arguments can be passed after the tool name.
 148 EOF
 149
 150   exit 1
 151 }
 152
 153 toolname=default
 154 while test $$# -gt 0 ; do
 155   case "$$1" in
 156     --tool=*)
 157       toolname="$${1:7}"
 158       shift
 159       ;;
 160     --*)
 161       usage
 162       ;;
 163     *)
 164       break
 165       ;;
 166   esac
 167 done
 168
 169 if test $$# -eq 0 ; then
 170   usage
 171 fi
 172
 173 case "$$toolname" in
 174   default)
 175     exec $(subst $(common-objdir),"$${builddir}", $(test-program-prefix)) \
 176       $${1+"$$@"}
 177     ;;
 178   strace*)
 179     exec $$toolname $(patsubst %, -E%, $(run-program-env)) \
 180       $(test-via-rtld-prefix) $${1+"$$@"}
 181     ;;
 182   rpctrace)
 183     exec rpctrace $(patsubst %, -E%, $(run-program-env)) \
 184       $(test-via-rtld-prefix) $${1+"$$@"}
 185     ;;
 186   valgrind*)
 187     exec env $(run-program-env) $$toolname $(test-via-rtld-prefix) $${1+"$$@"}
 188     ;;
 189   container)
 190     exec env $(run-program-env) $(test-via-rtld-prefix) \
 191       $(common-objdir)/support/test-container \
 192       env $(run-program-env) $(test-via-rtld-prefix) $${1+"$$@"}
 193     ;;
 194   *)
 195     usage
 196     ;;
 197 esac
 198 endef
 199
 200 # This is a handy script for running any dynamically linked program against
 201 # the current libc build for testing.
 202 $(common-objpfx)testrun.sh: $(common-objpfx)config.make \
 203                             $(..)Makeconfig $(..)Makefile
 204         $(file >$@T,$(testrun-script))
 205         chmod a+x $@T
 206         mv -f $@T $@
 207 postclean-generated += testrun.sh
 208
 209 define debugglibc
 210 #!/bin/bash
 211
 212 SOURCE_DIR="$(CURDIR)"
 213 BUILD_DIR="$(common-objpfx)"
 214 CMD_FILE="$(common-objpfx)debugglibc.gdb"
 215 CONTAINER=false
 216 DIRECT=true
 217 STATIC=false
 218 SYMBOLSFILE=true
 219 unset TESTCASE
 220 unset BREAKPOINTS
 221 unset ENVVARS
 222
 223 usage()
 224 {
 225 cat << EOF
 226 Usage: $$0 [OPTIONS] <program>
 227
 228    Or: $$0 [OPTIONS] -- <program> [<args>]...
 229
 230   where <program> is the path to the program being tested,
 231   and <args> are the arguments to be passed to it.
 232
 233 Options:
 234
 235   -h, --help
 236         Prints this message and leaves.
 237
 238   The following options require one argument:
 239
 240   -b, --breakpoint
 241         Breakpoints to set at the beginning of the execution
 242         (each breakpoint demands its own -b option, e.g. -b foo -b bar)
 243   -e, --environment-variable
 244         Environment variables to be set with 'exec-wrapper env' in GDB
 245         (each environment variable demands its own -e option, e.g.
 246         -e FOO=foo -e BAR=bar)
 247
 248   The following options do not take arguments:
 249
 250   -c, --in-container
 251         Run the test case inside a container and automatically attach
 252         GDB to it.
 253   -i, --no-direct
 254         Selects whether to pass the --direct flag to the program.
 255         --direct is useful when debugging glibc test cases. It inhibits the
 256         tests from forking and executing in a subprocess.
 257         Default behaviour is to pass the --direct flag, except when the
 258         program is run with user specified arguments using the "--" separator.
 259   -s, --no-symbols-file
 260         Do not tell GDB to load debug symbols from the program.
 261 EOF
 262 }
 263
 264 # Parse input options
 265 while [[ $$# > 0 ]]
 266 do
 267   key="$$1"
 268   case $$key in
 269     -h|--help)
 270       usage
 271       exit 0
 272       ;;
 273     -b|--breakpoint)
 274       BREAKPOINTS="break $$2\n$$BREAKPOINTS"
 275       shift
 276       ;;
 277     -e|--environment-variable)
 278       ENVVARS="$$2 $$ENVVARS"
 279       shift
 280       ;;
 281     -c|--in-container)
 282       CONTAINER=true
 283       ;;
 284     -i|--no-direct)
 285       DIRECT=false
 286       ;;
 287     -s|--no-symbols-file)
 288       SYMBOLSFILE=false
 289       ;;
 290     --)
 291       shift
 292       TESTCASE=$$1
 293       COMMANDLINE="$$@"
 294       # Don't add --direct when user specifies program arguments
 295       DIRECT=false
 296       break
 297       ;;
 298     *)
 299       TESTCASE=$$1
 300       COMMANDLINE=$$TESTCASE
 301       ;;
 302   esac
 303   shift
 304 done
 305
 306 # Check for required argument and if the testcase exists
 307 if [ ! -v TESTCASE ] || [ ! -f $${TESTCASE} ]
 308 then
 309   usage
 310   exit 1
 311 fi
 312
 313 # Container tests needing locale data should install them in-container.
 314 # Other tests/binaries need to use locale data from the build tree.
 315 if [ "$$CONTAINER" = false ]
 316 then
 317   ENVVARS="GCONV_PATH=$${BUILD_DIR}/iconvdata $$ENVVARS"
 318   ENVVARS="LOCPATH=$${BUILD_DIR}/localedata $$ENVVARS"
 319   ENVVARS="LC_ALL=C $$ENVVARS"
 320 fi
 321
 322 # Expand environment setup command
 323 if [ -v ENVVARS ]
 324 then
 325   ENVVARSCMD="set exec-wrapper env $$ENVVARS"
 326 fi
 327
 328 # Expand direct argument
 329 if [ "$$DIRECT" == true ]
 330 then
 331   DIRECT="--direct"
 332 else
 333   DIRECT=""
 334 fi
 335
 336 # Check if the test case is static
 337 if file $${TESTCASE} | grep "statically linked" >/dev/null
 338 then
 339   STATIC=true
 340 else
 341   STATIC=false
 342 fi
 343
 344 # Expand symbols loading command
 345 if [ "$$SYMBOLSFILE" == true ]
 346 then
 347   SYMBOLSFILE="add-symbol-file $${TESTCASE}"
 348 else
 349   SYMBOLSFILE=""
 350 fi
 351
 352 # GDB commands template
 353 template ()
 354 {
 355 cat <<EOF
 356 set environment C -E -x c-header
 357 set auto-load safe-path $${BUILD_DIR}/nptl_db:\$$debugdir:\$$datadir/auto-load
 358 set libthread-db-search-path $${BUILD_DIR}/nptl_db
 359 __ENVVARS__
 360 __SYMBOLSFILE__
 361 break _dl_start_user
 362 run --library-path $(rpath-link):$${BUILD_DIR}/nptl_db \
 363 __COMMANDLINE__ __DIRECT__
 364 __BREAKPOINTS__
 365 EOF
 366 }
 367
 368 # Generate the commands file for gdb initialization
 369 template | sed \
 370   -e "s|__ENVVARS__|$$ENVVARSCMD|" \
 371   -e "s|__SYMBOLSFILE__|$$SYMBOLSFILE|" \
 372   -e "s|__COMMANDLINE__|$$COMMANDLINE|" \
 373   -e "s|__DIRECT__|$$DIRECT|" \
 374   -e "s|__BREAKPOINTS__|$$BREAKPOINTS|" \
 375   > $$CMD_FILE
 376
 377 echo
 378 echo "Debugging glibc..."
 379 echo "Build directory  : $$BUILD_DIR"
 380 echo "Source directory : $$SOURCE_DIR"
 381 echo "GLIBC Testcase   : $$TESTCASE"
 382 echo "GDB Commands     : $$CMD_FILE"
 383 echo "Env vars         : $$ENVVARS"
 384 echo
 385
 386 if [ "$$CONTAINER" == true ]
 387 then
 388 # Use testrun.sh to start the test case with WAIT_FOR_DEBUGGER=1, then
 389 # automatically attach GDB to it.
 390 WAIT_FOR_DEBUGGER=1 $(common-objpfx)testrun.sh --tool=container $${TESTCASE} &
 391 gdb -x $${TESTCASE}.gdb
 392 elif [ "$$STATIC" == true ]
 393 then
 394 gdb $${TESTCASE}
 395 else
 396 # Start the test case debugging in two steps:
 397 #   1. the following command invokes gdb to run the loader;
 398 #   2. the commands file tells the loader to run the test case.
 399 gdb -q \
 400   -x $${CMD_FILE} \
 401   -d $${SOURCE_DIR} \
 402   $${BUILD_DIR}/elf/ld.so
 403 fi
 404 endef
 405
 406 # This is another handy script for debugging dynamically linked program
 407 # against the current libc build for testing.
 408 $(common-objpfx)debugglibc.sh: $(common-objpfx)config.make \
 409                             $(..)Makeconfig $(..)Makefile
 410         $(file >$@T,$(debugglibc))
 411         chmod a+x $@T
 412         mv -f $@T $@
 413 postclean-generated += debugglibc.sh debugglibc.gdb
 414
 415 others: $(common-objpfx)testrun.sh $(common-objpfx)debugglibc.sh
 416 \f
 417 # Makerules creates a file `stubs' in each subdirectory, which
 418 # contains `#define __stub_FUNCTION' for each function defined in that
 419 # directory which is a stub.
 420 # Here we paste all of these together into <gnu/stubs.h>.
 421
 422 subdir-stubs := $(foreach dir,$(subdirs),$(common-objpfx)$(dir)/stubs)
 423
 424 ifndef abi-variants
 425 installed-stubs = $(inst_includedir)/gnu/stubs.h
 426 else
 427 installed-stubs = $(inst_includedir)/gnu/stubs-$(default-abi).h
 428
 429 $(inst_includedir)/gnu/stubs.h: $(+force)
 430         $(make-target-directory)
 431         { \
 432          echo '/* This file is automatically generated.';\
 433          echo "   This file selects the right generated file of \`__stub_FUNCTION' macros";\
 434          echo '   based on the architecture being compiled for.  */'; \
 435          echo ''; \
 436          $(foreach h,$(abi-includes), echo '#include <$(h)>';) \
 437          echo ''; \
 438          $(foreach v,$(abi-variants),\
 439          $(if $(abi-$(v)-condition),\
 440          echo '#if $(abi-$(v)-condition)'; \
 441          echo '# include <gnu/stubs-$(v).h>'); \
 442          $(if $(abi-$(v)-condition),echo '#endif';) \
 443          rm -f $(@:.d=.h).new$(v); \
 444          ) \
 445         } > $(@:.d=.h).new
 446         mv -f $(@:.d=.h).new $(@:.d=.h)
 447
 448 install-others-nosubdir: $(installed-stubs)
 449 endif
 450
 451
 452 # Since stubs.h is never needed when building the library, we simplify the
 453 # hairy installation process by producing it in place only as the last part
 454 # of the top-level `make install'.  It depends on subdir_install, which
 455 # iterates over all the subdirs; subdir_install in each subdir depends on
 456 # the subdir's stubs file.  Having more direct dependencies would result in
 457 # extra iterations over the list for subdirs and many recursive makes.
 458 $(installed-stubs): include/stubs-prologue.h subdir_install
 459         $(make-target-directory)
 460         @rm -f $(objpfx)stubs.h
 461         (sed '/^@/d' $<; LC_ALL=C sort $(subdir-stubs)) > $(objpfx)stubs.h
 462         if test -r $@ && cmp -s $(objpfx)stubs.h $@; \
 463         then echo 'stubs.h unchanged'; \
 464         else $(INSTALL_DATA) $(objpfx)stubs.h $@; fi
 465         rm -f $(objpfx)stubs.h
 466 \f
 467 # This makes the Info or DVI file of the documentation from the Texinfo source.
 468 .PHONY: info dvi pdf html
 469 info dvi pdf html:
 470         $(MAKE) $(PARALLELMFLAGS) -C manual $@
 471 \f
 472 # This makes all the subdirectory targets.
 473
 474 # For each target, make it depend on DIR/target for each subdirectory DIR.
 475 $(+subdir_targets): %: $(addsuffix /%,$(subdirs))
 476
 477 # Compute a list of all those targets.
 478 all-subdirs-targets := $(foreach dir,$(subdirs),\
 479                                  $(addprefix $(dir)/,$(+subdir_targets)))
 480
 481 # The action for each of those is to cd into the directory and make the
 482 # target there.
 483 $(all-subdirs-targets):
 484         $(MAKE) $(PARALLELMFLAGS) $(subdir-target-args) $(@F)
 485
 486 define subdir-target-args
 487 subdir=$(@D)$(if $($(@D)-srcdir),\
 488 -C $($(@D)-srcdir) ..=`pwd`/,\
 489 -C $(@D) ..=../)
 490 endef
 491
 492 .PHONY: $(+subdir_targets) $(all-subdirs-targets)
 493 \f
 494 # Targets to clean things up to various degrees.
 495
 496 .PHONY: clean realclean distclean distclean-1 parent-clean parent-mostlyclean \
 497         tests-clean
 498
 499 # Subroutines of all cleaning targets.
 500 parent-mostlyclean: common-mostlyclean # common-mostlyclean is in Makerules.
 501         -rm -f $(foreach o,$(object-suffixes-for-libc),\
 502                    $(common-objpfx)$(patsubst %,$(libtype$o),c)) \
 503                $(addprefix $(objpfx),$(install-lib))
 504 parent-clean: parent-mostlyclean common-clean
 505
 506 postclean = $(addprefix $(common-objpfx),$(postclean-generated)) \
 507             $(addprefix $(objpfx),sysd-dirs sysd-rules) \
 508             $(addprefix $(objpfx),sysd-sorted soversions.mk soversions.i)
 509
 510 clean: parent-clean
 511 # This is done this way rather than having `subdir_clean' be a
 512 # dependency of this target so that libc.a will be removed before the
 513 # subdirectories are dealt with and so they won't try to remove object
 514 # files from it when it's going to be removed anyway.
 515         @$(MAKE) subdir_clean no_deps=t
 516         -rm -f $(postclean)
 517 mostlyclean: parent-mostlyclean
 518         @$(MAKE) subdir_mostlyclean no_deps=t
 519         -rm -f $(postclean)
 520
 521 # Remove test artifacts from the whole glibc build.
 522 # do-tests-clean removes test artifacts from top-level directory, and
 523 # subdir_testclean removes them from individual sub-directories.
 524 tests-clean: do-tests-clean
 525         @$(MAKE) subdir_testclean no_deps=t
 526
 527 ifneq (,$(CXX))
 528 vpath c++-types.data $(+sysdep_dirs)
 529
 530 tests-special += $(objpfx)c++-types-check.out
 531 $(objpfx)c++-types-check.out: c++-types.data scripts/check-c++-types.sh
 532         scripts/check-c++-types.sh $< $(CXX) $(filter-out -std=gnu11 $(+gccwarn-c),$(CFLAGS)) $(CPPFLAGS) > $@; \
 533         $(evaluate-test)
 534 endif
 535
 536 tests-special += $(objpfx)check-local-headers.out
 537 $(objpfx)check-local-headers.out: scripts/check-local-headers.sh
 538         AWK='$(AWK)' scripts/check-local-headers.sh \
 539           "$(includedir)" "$(objpfx)" < /dev/null > $@; \
 540         $(evaluate-test)
 541
 542 ifneq "$(headers)" ""
 543 # Special test of all the installed headers in this directory.
 544 tests-special += $(objpfx)check-installed-headers-c.out
 545 libof-check-installed-headers-c := testsuite
 546 $(objpfx)check-installed-headers-c.out: \
 547     scripts/check-installed-headers.sh $(headers)
 548         $(SHELL) $(..)scripts/check-installed-headers.sh c \
 549           "$(CC) $(filter-out -std=%,$(CFLAGS)) -D_ISOMAC $(+includes)" \
 550           $(headers) > $@; \
 551         $(evaluate-test)
 552
 553 ifneq "$(CXX)" ""
 554 tests-special += $(objpfx)check-installed-headers-cxx.out
 555 libof-check-installed-headers-cxx := testsuite
 556 $(objpfx)check-installed-headers-cxx.out: \
 557     scripts/check-installed-headers.sh $(headers)
 558         $(SHELL) $(..)scripts/check-installed-headers.sh c++ \
 559           "$(CXX) $(filter-out -std=%,$(CXXFLAGS)) -D_ISOMAC $(+includes)" \
 560           $(headers) > $@; \
 561         $(evaluate-test)
 562 endif # $(CXX)
 563
 564 tests-special += $(objpfx)check-wrapper-headers.out
 565 $(objpfx)check-wrapper-headers.out: scripts/check-wrapper-headers.py $(headers)
 566         $(PYTHON) $< --root=. --subdir=. $(headers) \
 567           --generated $(common-generated) > $@; $(evaluate-test)
 568 endif # $(headers)
 569
 570 # Lint all Makefiles; including this one.  Pass `pwd` as the source
 571 # directory since the top-level Makefile is in the root of the source
 572 # tree and these tests are run from there.  We add light-weight linting
 573 # to the 'check' target to support the existing developer workflow of:
 574 # edit -> make -> make check; without needing an additional step.
 575 tests-special += $(objpfx)lint-makefiles.out
 576 $(objpfx)lint-makefiles.out: scripts/lint-makefiles.sh
 577         $(SHELL) $< "$(PYTHON)" `pwd` > $@ ; \
 578         $(evaluate-test)
 579
 580 define summarize-tests
 581 @grep -E -v '^(PASS|XFAIL):' $(objpfx)$1 || true
 582 @echo "Summary of test results$2:"
 583 @sed 's/:.*//' < $(objpfx)$1 | sort | uniq -c
 584 @! grep -E -q -v '^(X?PASS|XFAIL|UNSUPPORTED):' $(objpfx)$1
 585 endef
 586
 587 # The intention here is to do ONE install of our build into the
 588 # testroot.pristine/ directory, then rsync (internal to
 589 # support/test-container) that to testroot.root/ at the start of each
 590 # test.  That way we can promise each test a "clean" install, without
 591 # having to do the install for each test.
 592 #
 593 # In addition, we have to copy some files (which we build) into this
 594 # root in addition to what glibc installs.  For example, many tests
 595 # require additional programs including /bin/sh, /bin/true, and
 596 # /bin/echo, all of which we build below to limit library dependencies
 597 # to just those things in glibc and language support libraries which
 598 # we also copy into the into the rootfs.  To determine what language
 599 # support libraries we need we build a "test" program in either C or
 600 # (if available) C++ just so we can copy in any shared objects
 601 # (which we do not build) that GCC-compiled programs depend on.
 602
 603
 604 ifeq (,$(CXX))
 605 LINKS_DSO_PROGRAM = links-dso-program-c
 606 else
 607 LINKS_DSO_PROGRAM = links-dso-program
 608 endif
 609
 610 $(tests-container) $(addsuffix /tests,$(subdirs)) : \
 611                 $(objpfx)testroot.pristine/install.stamp
 612 $(objpfx)testroot.pristine/install.stamp :
 613         test -d $(objpfx)testroot.pristine || \
 614           mkdir $(objpfx)testroot.pristine
 615         # We need a working /bin/sh for some of the tests.
 616         test -d $(objpfx)testroot.pristine/bin || \
 617           mkdir $(objpfx)testroot.pristine/bin
 618         # We need the compiled locale dir for localedef tests.
 619         test -d $(objpfx)testroot.pristine/$(complocaledir) || \
 620           mkdir -p $(objpfx)testroot.pristine/$(complocaledir)
 621         cp $(objpfx)support/shell-container $(objpfx)testroot.pristine/bin/sh
 622         cp $(objpfx)support/echo-container $(objpfx)testroot.pristine/bin/echo
 623         cp $(objpfx)support/true-container $(objpfx)testroot.pristine/bin/true
 624 ifeq ($(run-built-tests),yes)
 625         # Copy these DSOs first so we can overwrite them with our own.
 626         for dso in `$(test-wrapper-env) LD_TRACE_LOADED_OBJECTS=1  \
 627                 $(rtld-prefix) \
 628                 $(objpfx)testroot.pristine/bin/sh \
 629                 | sed -n '/\//{s@.*=> /@/@;s/^[^/]*//;s/ .*//p;}'` ;\
 630           do \
 631             test -d `dirname $(objpfx)testroot.pristine$$dso` || \
 632               mkdir -p `dirname $(objpfx)testroot.pristine$$dso` ;\
 633             $(test-wrapper) cp $$dso $(objpfx)testroot.pristine$$dso ;\
 634           done
 635         for dso in `$(test-wrapper-env) LD_TRACE_LOADED_OBJECTS=1  \
 636                 $(rtld-prefix) \
 637                 $(objpfx)support/$(LINKS_DSO_PROGRAM) \
 638                 | sed -n '/\//{s@.*=> /@/@;s/^[^/]*//;s/ .*//p;}'` ;\
 639           do \
 640             test -d `dirname $(objpfx)testroot.pristine$$dso` || \
 641               mkdir -p `dirname $(objpfx)testroot.pristine$$dso` ;\
 642             $(test-wrapper) cp $$dso $(objpfx)testroot.pristine$$dso ;\
 643           done
 644 endif
 645         # $(symbolic-link-list) is a file that encodes $(DESTDIR) so we
 646         # have to purge it
 647         rm -f $(symbolic-link-list)
 648         # Setting INSTALL_UNCOMPRESSED causes localedata/Makefile to
 649         # install the charmaps uncompressed, as the testroot does not
 650         # provide a gunzip program.
 651         $(MAKE) install DESTDIR=$(objpfx)testroot.pristine \
 652           INSTALL_UNCOMPRESSED=yes subdirs='$(sorted-subdirs)'
 653         rm -f $(symbolic-link-list)
 654         touch $(objpfx)testroot.pristine/install.stamp
 655
 656 tests-special-notdir = $(patsubst $(objpfx)%, %, $(tests-special))
 657 tests: $(tests-special)
 658         $(..)scripts/merge-test-results.sh -s $(objpfx) "" \
 659           $(sort $(tests-special-notdir:.out=)) \
 660           > $(objpfx)subdir-tests.sum
 661         $(..)scripts/merge-test-results.sh -t $(objpfx) subdir-tests.sum \
 662           $(sort $(subdirs) .) \
 663           > $(objpfx)tests.sum
 664         $(call summarize-tests,tests.sum)
 665 xtests:
 666         $(..)scripts/merge-test-results.sh -t $(objpfx) subdir-xtests.sum \
 667           $(sort $(subdirs)) \
 668           > $(objpfx)xtests.sum
 669         $(call summarize-tests,xtests.sum, for extra tests)
 670
 671 # The realclean target is just like distclean for the parent, but we want
 672 # the subdirs to know the difference in case they care.
 673 realclean distclean: parent-clean
 674 # This is done this way rather than having `subdir_distclean' be a
 675 # dependency of this target so that libc.a will be removed before the
 676 # subdirectories are dealt with and so they won't try to remove object
 677 # files from it when it's going to be removed anyway.
 678         @$(MAKE) distclean-1 no_deps=t distclean-1=$@ avoid-generated=yes \
 679                  sysdep-subdirs="$(sysdep-subdirs)"
 680         -rm -f $(postclean)
 681
 682 # Subroutine of distclean and realclean.
 683 distclean-1: subdir_$(distclean-1)
 684         -rm -f $(config-generated)
 685         -rm -f $(addprefix $(objpfx),config.status config.cache config.log)
 686         -rm -f $(addprefix $(objpfx),config.make config-name.h config.h)
 687 ifdef objdir
 688         -rm -f $(objpfx)Makefile
 689 endif
 690         -rm -f $(sysdep-$(distclean-1))
 691 \f
 692 # Make the TAGS file for Emacs users.
 693
 694 .PHONY: TAGS
 695 TAGS:
 696         scripts/list-sources.sh | sed -n -e '/Makefile/p' \
 697           $(foreach S,[chsSyl] cxx sh bash pl,\
 698                     $(subst .,\.,-e '/.$S\(.in\)*$$/p')) \
 699         | $(ETAGS) -o $@ -
 700 \f
 701 # Make the distribution tarfile.
 702 .PHONY: dist dist-prepare
 703
 704 generated := $(generated) stubs.h
 705
 706 files-for-dist := README INSTALL configure NEWS
 707
 708 # Regenerate stuff, then error if these things are not committed yet.
 709 dist-prepare: $(files-for-dist)
 710         conf=`find sysdeps -name configure`; \
 711         $(MAKE) $$conf && \
 712         git diff --stat HEAD -- $^ $$conf \
 713         | $(AWK) '{ print; rc=1 } END { exit rc }'
 714
 715 %.tar: FORCE
 716         git archive --prefix=$*/ $* > $@.new
 717         mv -f $@.new $@
 718
 719 # Do `make dist dist-version=X.Y.Z' to make tar files of an older version.
 720
 721 ifneq (,$(strip $(dist-version)))
 722 dist: $(foreach Z,.bz2 .gz .xz,$(dist-version).tar$Z)
 723         md5sum $^
 724 else
 725 dist: dist-prepare
 726         @if v=`git describe`; then \
 727           echo Distribution version $$v; \
 728           $(MAKE) dist dist-version=$$v; \
 729         else \
 730           false; \
 731         fi
 732 endif
 733
 734 INSTALL: manual/install-plain.texi manual/macros.texi \
 735          $(common-objpfx)manual/pkgvers.texi manual/install.texi
 736         makeinfo --no-validate --plaintext --no-number-sections \
 737                  -I$(common-objpfx)manual $< -o $@-tmp
 738         $(AWK) 'NF == 0 { ++n; next } \
 739                 NF != 0 { while (n-- > 0) print ""; n = 0; print }' \
 740           < $@-tmp > $@-tmp2
 741         rm -f $@-tmp
 742         -chmod a-w $@-tmp2
 743         mv -f $@-tmp2 $@
 744 $(common-objpfx)manual/%: FORCE
 745         $(MAKE) $(PARALLELMFLAGS) -C manual $@
 746 FORCE:
 747
 748 iconvdata/% localedata/% po/%: FORCE
 749         $(MAKE) $(PARALLELMFLAGS) -C $(@D) $(@F)
 750
 751 # Convenience target to rerun one test, from the top of the build tree
 752 # Example: make test t=wcsmbs/test-wcsnlen
 753 .PHONY: test
 754 test :
 755         @-rm -f $(objpfx)$t.out
 756         $(MAKE) subdir=$(patsubst %/,%,$(dir $t)) -C $(dir $t) ..=../ $(objpfx)$t.out
 757         @cat $(objpfx)$t.test-result
 758         @cat $(objpfx)$t.out