sysdeps/gnu/errlist.h

   1 _S(0, N_("Success"))
   2 #ifdef EPERM
   3 /*
   4 TRANS Only the owner of the file (or other resource)
   5 TRANS or processes with special privileges can perform the operation. */
   6 _S(EPERM, N_("Operation not permitted"))
   7 #endif
   8 #ifdef ENOENT
   9 /*
  10 TRANS This is a ``file doesn't exist'' error
  11 TRANS for ordinary files that are referenced in contexts where they are
  12 TRANS expected to already exist. */
  13 _S(ENOENT, N_("No such file or directory"))
  14 #endif
  15 #ifdef ESRCH
  16 /*
  17 TRANS No process matches the specified process ID. */
  18 _S(ESRCH, N_("No such process"))
  19 #endif
  20 #ifdef EINTR
  21 /*
  22 TRANS An asynchronous signal occurred and prevented
  23 TRANS completion of the call.  When this happens, you should try the call
  24 TRANS again.
  25 TRANS
  26 TRANS You can choose to have functions resume after a signal that is handled,
  27 TRANS rather than failing with @code{EINTR}; see @ref{Interrupted
  28 TRANS Primitives}. */
  29 _S(EINTR, N_("Interrupted system call"))
  30 #endif
  31 #ifdef EIO
  32 /*
  33 TRANS Usually used for physical read or write errors. */
  34 _S(EIO, N_("Input/output error"))
  35 #endif
  36 #ifdef ENXIO
  37 /*
  38 TRANS The system tried to use the device
  39 TRANS represented by a file you specified, and it couldn't find the device.
  40 TRANS This can mean that the device file was installed incorrectly, or that
  41 TRANS the physical device is missing or not correctly attached to the
  42 TRANS computer. */
  43 _S(ENXIO, N_("No such device or address"))
  44 #endif
  45 #ifdef E2BIG
  46 /*
  47 TRANS Used when the arguments passed to a new program
  48 TRANS being executed with one of the @code{exec} functions (@pxref{Executing a
  49 TRANS File}) occupy too much memory space.  This condition never arises on
  50 TRANS @gnuhurdsystems{}. */
  51 _S(E2BIG, N_("Argument list too long"))
  52 #endif
  53 #ifdef ENOEXEC
  54 /*
  55 TRANS Invalid executable file format.  This condition is detected by the
  56 TRANS @code{exec} functions; see @ref{Executing a File}. */
  57 _S(ENOEXEC, N_("Exec format error"))
  58 #endif
  59 #ifdef EBADF
  60 /*
  61 TRANS For example, I/O on a descriptor that has been
  62 TRANS closed or reading from a descriptor open only for writing (or vice
  63 TRANS versa). */
  64 _S(EBADF, N_("Bad file descriptor"))
  65 #endif
  66 #ifdef ECHILD
  67 /*
  68 TRANS This error happens on operations that are
  69 TRANS supposed to manipulate child processes, when there aren't any processes
  70 TRANS to manipulate. */
  71 _S(ECHILD, N_("No child processes"))
  72 #endif
  73 #ifdef EDEADLK
  74 /*
  75 TRANS Allocating a system resource would have resulted in a
  76 TRANS deadlock situation.  The system does not guarantee that it will notice
  77 TRANS all such situations.  This error means you got lucky and the system
  78 TRANS noticed; it might just hang.  @xref{File Locks}, for an example. */
  79 _S(EDEADLK, N_("Resource deadlock avoided"))
  80 #endif
  81 #ifdef ENOMEM
  82 /*
  83 TRANS The system cannot allocate more virtual memory
  84 TRANS because its capacity is full. */
  85 _S(ENOMEM, N_("Cannot allocate memory"))
  86 #endif
  87 #ifdef EACCES
  88 /*
  89 TRANS The file permissions do not allow the attempted operation. */
  90 _S(EACCES, N_("Permission denied"))
  91 #endif
  92 #ifdef EFAULT
  93 /*
  94 TRANS An invalid pointer was detected.
  95 TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. */
  96 _S(EFAULT, N_("Bad address"))
  97 #endif
  98 #ifdef ENOTBLK
  99 /*
 100 TRANS A file that isn't a block special file was given in a situation that
 101 TRANS requires one.  For example, trying to mount an ordinary file as a file
 102 TRANS system in Unix gives this error. */
 103 _S(ENOTBLK, N_("Block device required"))
 104 #endif
 105 #ifdef EBUSY
 106 /*
 107 TRANS A system resource that can't be shared is already in use.
 108 TRANS For example, if you try to delete a file that is the root of a currently
 109 TRANS mounted filesystem, you get this error. */
 110 _S(EBUSY, N_("Device or resource busy"))
 111 #endif
 112 #ifdef EEXIST
 113 /*
 114 TRANS An existing file was specified in a context where it only
 115 TRANS makes sense to specify a new file. */
 116 _S(EEXIST, N_("File exists"))
 117 #endif
 118 #ifdef EXDEV
 119 /*
 120 TRANS An attempt to make an improper link across file systems was detected.
 121 TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but
 122 TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). */
 123 _S(EXDEV, N_("Invalid cross-device link"))
 124 #endif
 125 #ifdef ENODEV
 126 /*
 127 TRANS The wrong type of device was given to a function that expects a
 128 TRANS particular sort of device. */
 129 _S(ENODEV, N_("No such device"))
 130 #endif
 131 #ifdef ENOTDIR
 132 /*
 133 TRANS A file that isn't a directory was specified when a directory is required. */
 134 _S(ENOTDIR, N_("Not a directory"))
 135 #endif
 136 #ifdef EISDIR
 137 /*
 138 TRANS You cannot open a directory for writing,
 139 TRANS or create or remove hard links to it. */
 140 _S(EISDIR, N_("Is a directory"))
 141 #endif
 142 #ifdef EINVAL
 143 /*
 144 TRANS This is used to indicate various kinds of problems
 145 TRANS with passing the wrong argument to a library function. */
 146 _S(EINVAL, N_("Invalid argument"))
 147 #endif
 148 #ifdef EMFILE
 149 /*
 150 TRANS The current process has too many files open and can't open any more.
 151 TRANS Duplicate descriptors do count toward this limit.
 152 TRANS
 153 TRANS In BSD and GNU, the number of open files is controlled by a resource
 154 TRANS limit that can usually be increased.  If you get this error, you might
 155 TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited;
 156 TRANS @pxref{Limits on Resources}. */
 157 _S(EMFILE, N_("Too many open files"))
 158 #endif
 159 #ifdef ENFILE
 160 /*
 161 TRANS There are too many distinct file openings in the entire system.  Note
 162 TRANS that any number of linked channels count as just one file opening; see
 163 TRANS @ref{Linked Channels}.  This error never occurs on @gnuhurdsystems{}. */
 164 _S(ENFILE, N_("Too many open files in system"))
 165 #endif
 166 #ifdef ENOTTY
 167 /*
 168 TRANS Inappropriate I/O control operation, such as trying to set terminal
 169 TRANS modes on an ordinary file. */
 170 _S(ENOTTY, N_("Inappropriate ioctl for device"))
 171 #endif
 172 #ifdef ETXTBSY
 173 /*
 174 TRANS An attempt to execute a file that is currently open for writing, or
 175 TRANS write to a file that is currently being executed.  Often using a
 176 TRANS debugger to run a program is considered having it open for writing and
 177 TRANS will cause this error.  (The name stands for ``text file busy''.)  This
 178 TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. */
 179 _S(ETXTBSY, N_("Text file busy"))
 180 #endif
 181 #ifdef EFBIG
 182 /*
 183 TRANS The size of a file would be larger than allowed by the system. */
 184 _S(EFBIG, N_("File too large"))
 185 #endif
 186 #ifdef ENOSPC
 187 /*
 188 TRANS Write operation on a file failed because the
 189 TRANS disk is full. */
 190 _S(ENOSPC, N_("No space left on device"))
 191 #endif
 192 #ifdef ESPIPE
 193 /*
 194 TRANS Invalid seek operation (such as on a pipe). */
 195 _S(ESPIPE, N_("Illegal seek"))
 196 #endif
 197 #ifdef EROFS
 198 /*
 199 TRANS An attempt was made to modify something on a read-only file system. */
 200 _S(EROFS, N_("Read-only file system"))
 201 #endif
 202 #ifdef EMLINK
 203 /*
 204 TRANS The link count of a single file would become too large.
 205 TRANS @code{rename} can cause this error if the file being renamed already has
 206 TRANS as many links as it can take (@pxref{Renaming Files}). */
 207 _S(EMLINK, N_("Too many links"))
 208 #endif
 209 #ifdef EPIPE
 210 /*
 211 TRANS There is no process reading from the other end of a pipe.
 212 TRANS Every library function that returns this error code also generates a
 213 TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled
 214 TRANS or blocked.  Thus, your program will never actually see @code{EPIPE}
 215 TRANS unless it has handled or blocked @code{SIGPIPE}. */
 216 _S(EPIPE, N_("Broken pipe"))
 217 #endif
 218 #ifdef EDOM
 219 /*
 220 TRANS Used by mathematical functions when an argument value does
 221 TRANS not fall into the domain over which the function is defined. */
 222 _S(EDOM, N_("Numerical argument out of domain"))
 223 #endif
 224 #ifdef ERANGE
 225 /*
 226 TRANS Used by mathematical functions when the result value is
 227 TRANS not representable because of overflow or underflow. */
 228 _S(ERANGE, N_("Numerical result out of range"))
 229 #endif
 230 #ifdef EAGAIN
 231 /*
 232 TRANS The call might work if you try again
 233 TRANS later.  The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN};
 234 TRANS they are always the same in @theglibc{}.
 235 TRANS
 236 TRANS This error can happen in a few different situations:
 237 TRANS
 238 TRANS @itemize @bullet
 239 TRANS @item
 240 TRANS An operation that would block was attempted on an object that has
 241 TRANS non-blocking mode selected.  Trying the same operation again will block
 242 TRANS until some external condition makes it possible to read, write, or
 243 TRANS connect (whatever the operation).  You can use @code{select} to find out
 244 TRANS when the operation will be possible; @pxref{Waiting for I/O}.
 245 TRANS
 246 TRANS @strong{Portability Note:} In many older Unix systems, this condition
 247 TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code
 248 TRANS different from @code{EAGAIN}.  To make your program portable, you should
 249 TRANS check for both codes and treat them the same.
 250 TRANS
 251 TRANS @item
 252 TRANS A temporary resource shortage made an operation impossible.  @code{fork}
 253 TRANS can return this error.  It indicates that the shortage is expected to
 254 TRANS pass, so your program can try the call again later and it may succeed.
 255 TRANS It is probably a good idea to delay for a few seconds before trying it
 256 TRANS again, to allow time for other processes to release scarce resources.
 257 TRANS Such shortages are usually fairly serious and affect the whole system,
 258 TRANS so usually an interactive program should report the error to the user
 259 TRANS and return to its command loop.
 260 TRANS @end itemize */
 261 _S(EAGAIN, N_("Resource temporarily unavailable"))
 262 #endif
 263 #ifdef EINPROGRESS
 264 /*
 265 TRANS An operation that cannot complete immediately was initiated on an object
 266 TRANS that has non-blocking mode selected.  Some functions that must always
 267 TRANS block (such as @code{connect}; @pxref{Connecting}) never return
 268 TRANS @code{EAGAIN}.  Instead, they return @code{EINPROGRESS} to indicate that
 269 TRANS the operation has begun and will take some time.  Attempts to manipulate
 270 TRANS the object before the call completes return @code{EALREADY}.  You can
 271 TRANS use the @code{select} function to find out when the pending operation
 272 TRANS has completed; @pxref{Waiting for I/O}. */
 273 _S(EINPROGRESS, N_("Operation now in progress"))
 274 #endif
 275 #ifdef EALREADY
 276 /*
 277 TRANS An operation is already in progress on an object that has non-blocking
 278 TRANS mode selected. */
 279 _S(EALREADY, N_("Operation already in progress"))
 280 #endif
 281 #ifdef ENOTSOCK
 282 /*
 283 TRANS A file that isn't a socket was specified when a socket is required. */
 284 _S(ENOTSOCK, N_("Socket operation on non-socket"))
 285 #endif
 286 #ifdef EMSGSIZE
 287 /*
 288 TRANS The size of a message sent on a socket was larger than the supported
 289 TRANS maximum size. */
 290 _S(EMSGSIZE, N_("Message too long"))
 291 #endif
 292 #ifdef EPROTOTYPE
 293 /*
 294 TRANS The socket type does not support the requested communications protocol. */
 295 _S(EPROTOTYPE, N_("Protocol wrong type for socket"))
 296 #endif
 297 #ifdef ENOPROTOOPT
 298 /*
 299 TRANS You specified a socket option that doesn't make sense for the
 300 TRANS particular protocol being used by the socket.  @xref{Socket Options}. */
 301 _S(ENOPROTOOPT, N_("Protocol not available"))
 302 #endif
 303 #ifdef EPROTONOSUPPORT
 304 /*
 305 TRANS The socket domain does not support the requested communications protocol
 306 TRANS (perhaps because the requested protocol is completely invalid).
 307 TRANS @xref{Creating a Socket}. */
 308 _S(EPROTONOSUPPORT, N_("Protocol not supported"))
 309 #endif
 310 #ifdef ESOCKTNOSUPPORT
 311 /*
 312 TRANS The socket type is not supported. */
 313 _S(ESOCKTNOSUPPORT, N_("Socket type not supported"))
 314 #endif
 315 #ifdef EOPNOTSUPP
 316 /*
 317 TRANS The operation you requested is not supported.  Some socket functions
 318 TRANS don't make sense for all types of sockets, and others may not be
 319 TRANS implemented for all communications protocols.  On @gnuhurdsystems{}, this
 320 TRANS error can happen for many calls when the object does not support the
 321 TRANS particular operation; it is a generic indication that the server knows
 322 TRANS nothing to do for that call. */
 323 _S(EOPNOTSUPP, N_("Operation not supported"))
 324 #endif
 325 #ifdef EPFNOSUPPORT
 326 /*
 327 TRANS The socket communications protocol family you requested is not supported. */
 328 _S(EPFNOSUPPORT, N_("Protocol family not supported"))
 329 #endif
 330 #ifdef EAFNOSUPPORT
 331 /*
 332 TRANS The address family specified for a socket is not supported; it is
 333 TRANS inconsistent with the protocol being used on the socket.  @xref{Sockets}. */
 334 _S(EAFNOSUPPORT, N_("Address family not supported by protocol"))
 335 #endif
 336 #ifdef EADDRINUSE
 337 /*
 338 TRANS The requested socket address is already in use.  @xref{Socket Addresses}. */
 339 _S(EADDRINUSE, N_("Address already in use"))
 340 #endif
 341 #ifdef EADDRNOTAVAIL
 342 /*
 343 TRANS The requested socket address is not available; for example, you tried
 344 TRANS to give a socket a name that doesn't match the local host name.
 345 TRANS @xref{Socket Addresses}. */
 346 _S(EADDRNOTAVAIL, N_("Cannot assign requested address"))
 347 #endif
 348 #ifdef ENETDOWN
 349 /*
 350 TRANS A socket operation failed because the network was down. */
 351 _S(ENETDOWN, N_("Network is down"))
 352 #endif
 353 #ifdef ENETUNREACH
 354 /*
 355 TRANS A socket operation failed because the subnet containing the remote host
 356 TRANS was unreachable. */
 357 _S(ENETUNREACH, N_("Network is unreachable"))
 358 #endif
 359 #ifdef ENETRESET
 360 /*
 361 TRANS A network connection was reset because the remote host crashed. */
 362 _S(ENETRESET, N_("Network dropped connection on reset"))
 363 #endif
 364 #ifdef ECONNABORTED
 365 /*
 366 TRANS A network connection was aborted locally. */
 367 _S(ECONNABORTED, N_("Software caused connection abort"))
 368 #endif
 369 #ifdef ECONNRESET
 370 /*
 371 TRANS A network connection was closed for reasons outside the control of the
 372 TRANS local host, such as by the remote machine rebooting or an unrecoverable
 373 TRANS protocol violation. */
 374 _S(ECONNRESET, N_("Connection reset by peer"))
 375 #endif
 376 #ifdef ENOBUFS
 377 /*
 378 TRANS The kernel's buffers for I/O operations are all in use.  In GNU, this
 379 TRANS error is always synonymous with @code{ENOMEM}; you may get one or the
 380 TRANS other from network operations. */
 381 _S(ENOBUFS, N_("No buffer space available"))
 382 #endif
 383 #ifdef EISCONN
 384 /*
 385 TRANS You tried to connect a socket that is already connected.
 386 TRANS @xref{Connecting}. */
 387 _S(EISCONN, N_("Transport endpoint is already connected"))
 388 #endif
 389 #ifdef ENOTCONN
 390 /*
 391 TRANS The socket is not connected to anything.  You get this error when you
 392 TRANS try to transmit data over a socket, without first specifying a
 393 TRANS destination for the data.  For a connectionless socket (for datagram
 394 TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. */
 395 _S(ENOTCONN, N_("Transport endpoint is not connected"))
 396 #endif
 397 #ifdef EDESTADDRREQ
 398 /*
 399 TRANS No default destination address was set for the socket.  You get this
 400 TRANS error when you try to transmit data over a connectionless socket,
 401 TRANS without first specifying a destination for the data with @code{connect}. */
 402 _S(EDESTADDRREQ, N_("Destination address required"))
 403 #endif
 404 #ifdef ESHUTDOWN
 405 /*
 406 TRANS The socket has already been shut down. */
 407 _S(ESHUTDOWN, N_("Cannot send after transport endpoint shutdown"))
 408 #endif
 409 #ifdef ETOOMANYREFS
 410 _S(ETOOMANYREFS, N_("Too many references: cannot splice"))
 411 #endif
 412 #ifdef ETIMEDOUT
 413 /*
 414 TRANS A socket operation with a specified timeout received no response during
 415 TRANS the timeout period. */
 416 _S(ETIMEDOUT, N_("Connection timed out"))
 417 #endif
 418 #ifdef ECONNREFUSED
 419 /*
 420 TRANS A remote host refused to allow the network connection (typically because
 421 TRANS it is not running the requested service). */
 422 _S(ECONNREFUSED, N_("Connection refused"))
 423 #endif
 424 #ifdef ELOOP
 425 /*
 426 TRANS Too many levels of symbolic links were encountered in looking up a file name.
 427 TRANS This often indicates a cycle of symbolic links. */
 428 _S(ELOOP, N_("Too many levels of symbolic links"))
 429 #endif
 430 #ifdef ENAMETOOLONG
 431 /*
 432 TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for
 433 TRANS Files}) or host name too long (in @code{gethostname} or
 434 TRANS @code{sethostname}; @pxref{Host Identification}). */
 435 _S(ENAMETOOLONG, N_("File name too long"))
 436 #endif
 437 #ifdef EHOSTDOWN
 438 /*
 439 TRANS The remote host for a requested network connection is down. */
 440 _S(EHOSTDOWN, N_("Host is down"))
 441 #endif
 442 /*
 443 TRANS The remote host for a requested network connection is not reachable. */
 444 #ifdef EHOSTUNREACH
 445 _S(EHOSTUNREACH, N_("No route to host"))
 446 #endif
 447 #ifdef ENOTEMPTY
 448 /*
 449 TRANS Directory not empty, where an empty directory was expected.  Typically,
 450 TRANS this error occurs when you are trying to delete a directory. */
 451 _S(ENOTEMPTY, N_("Directory not empty"))
 452 #endif
 453 #ifdef EUSERS
 454 /*
 455 TRANS The file quota system is confused because there are too many users.
 456 TRANS @c This can probably happen in a GNU system when using NFS. */
 457 _S(EUSERS, N_("Too many users"))
 458 #endif
 459 #ifdef EDQUOT
 460 /*
 461 TRANS The user's disk quota was exceeded. */
 462 _S(EDQUOT, N_("Disk quota exceeded"))
 463 #endif
 464 #ifdef ESTALE
 465 /*
 466 TRANS This indicates an internal confusion in the
 467 TRANS file system which is due to file system rearrangements on the server host
 468 TRANS for NFS file systems or corruption in other file systems.
 469 TRANS Repairing this condition usually requires unmounting, possibly repairing
 470 TRANS and remounting the file system. */
 471 _S(ESTALE, N_("Stale file handle"))
 472 #endif
 473 #ifdef EREMOTE
 474 /*
 475 TRANS An attempt was made to NFS-mount a remote file system with a file name that
 476 TRANS already specifies an NFS-mounted file.
 477 TRANS (This is an error on some operating systems, but we expect it to work
 478 TRANS properly on @gnuhurdsystems{}, making this error code impossible.) */
 479 _S(EREMOTE, N_("Object is remote"))
 480 #endif
 481 #ifdef ENOLCK
 482 /*
 483 TRANS This is used by the file locking facilities; see
 484 TRANS @ref{File Locks}.  This error is never generated by @gnuhurdsystems{}, but
 485 TRANS it can result from an operation to an NFS server running another
 486 TRANS operating system. */
 487 _S(ENOLCK, N_("No locks available"))
 488 #endif
 489 #ifdef ENOSYS
 490 /*
 491 TRANS This indicates that the function called is
 492 TRANS not implemented at all, either in the C library itself or in the
 493 TRANS operating system.  When you get this error, you can be sure that this
 494 TRANS particular function will always fail with @code{ENOSYS} unless you
 495 TRANS install a new version of the C library or the operating system. */
 496 _S(ENOSYS, N_("Function not implemented"))
 497 #endif
 498 #ifdef EILSEQ
 499 /*
 500 TRANS While decoding a multibyte character the function came along an invalid
 501 TRANS or an incomplete sequence of bytes or the given wide character is invalid. */
 502 _S(EILSEQ, N_("Invalid or incomplete multibyte or wide character"))
 503 #endif
 504 #ifdef EBADMSG
 505 _S(EBADMSG, N_("Bad message"))
 506 #endif
 507 #ifdef EIDRM
 508 _S(EIDRM, N_("Identifier removed"))
 509 #endif
 510 #ifdef EMULTIHOP
 511 _S(EMULTIHOP, N_("Multihop attempted"))
 512 #endif
 513 #ifdef ENODATA
 514 _S(ENODATA, N_("No data available"))
 515 #endif
 516 #ifdef ENOLINK
 517 _S(ENOLINK, N_("Link has been severed"))
 518 #endif
 519 #ifdef ENOMSG
 520 _S(ENOMSG, N_("No message of desired type"))
 521 #endif
 522 #ifdef ENOSR
 523 _S(ENOSR, N_("Out of streams resources"))
 524 #endif
 525 #ifdef ENOSTR
 526 _S(ENOSTR, N_("Device not a stream"))
 527 #endif
 528 #ifdef EOVERFLOW
 529 _S(EOVERFLOW, N_("Value too large for defined data type"))
 530 #endif
 531 #ifdef EPROTO
 532 _S(EPROTO, N_("Protocol error"))
 533 #endif
 534 #ifdef ETIME
 535 _S(ETIME, N_("Timer expired"))
 536 #endif
 537 #ifdef ECANCELED
 538 /*
 539 TRANS An asynchronous operation was canceled before it
 540 TRANS completed.  @xref{Asynchronous I/O}.  When you call @code{aio_cancel},
 541 TRANS the normal result is for the operations affected to complete with this
 542 TRANS error; @pxref{Cancel AIO Operations}. */
 543 _S(ECANCELED, N_("Operation canceled"))
 544 #endif
 545 #ifdef EOWNERDEAD
 546 _S(EOWNERDEAD, N_("Owner died"))
 547 #endif
 548 #ifdef ENOTRECOVERABLE
 549 _S(ENOTRECOVERABLE, N_("State not recoverable"))
 550 #endif
 551 #ifdef ERESTART
 552 _S(ERESTART, N_("Interrupted system call should be restarted"))
 553 #endif
 554 #ifdef ECHRNG
 555 _S(ECHRNG, N_("Channel number out of range"))
 556 #endif
 557 #ifdef EL2NSYNC
 558 _S(EL2NSYNC, N_("Level 2 not synchronized"))
 559 #endif
 560 #ifdef EL3HLT
 561 _S(EL3HLT, N_("Level 3 halted"))
 562 #endif
 563 #ifdef EL3RST
 564 _S(EL3RST, N_("Level 3 reset"))
 565 #endif
 566 #ifdef ELNRNG
 567 _S(ELNRNG, N_("Link number out of range"))
 568 #endif
 569 #ifdef EUNATCH
 570 _S(EUNATCH, N_("Protocol driver not attached"))
 571 #endif
 572 #ifdef ENOCSI
 573 _S(ENOCSI, N_("No CSI structure available"))
 574 #endif
 575 #ifdef EL2HLT
 576 _S(EL2HLT, N_("Level 2 halted"))
 577 #endif
 578 #ifdef EBADE
 579 _S(EBADE, N_("Invalid exchange"))
 580 #endif
 581 #ifdef EBADR
 582 _S(EBADR, N_("Invalid request descriptor"))
 583 #endif
 584 #ifdef EXFULL
 585 _S(EXFULL, N_("Exchange full"))
 586 #endif
 587 #ifdef ENOANO
 588 _S(ENOANO, N_("No anode"))
 589 #endif
 590 #ifdef EBADRQC
 591 _S(EBADRQC, N_("Invalid request code"))
 592 #endif
 593 #ifdef EBADSLT
 594 _S(EBADSLT, N_("Invalid slot"))
 595 #endif
 596 #if defined EDEADLOCK && EDEADLOCK != EDEADLK
 597 _S (EDEADLOCK, N_ ("File locking deadlock error"))
 598 #endif
 599 #ifdef EBFONT
 600 _S(EBFONT, N_("Bad font file format"))
 601 #endif
 602 #ifdef ENONET
 603 _S(ENONET, N_("Machine is not on the network"))
 604 #endif
 605 #ifdef ENOPKG
 606 _S(ENOPKG, N_("Package not installed"))
 607 #endif
 608 #ifdef EADV
 609 _S(EADV, N_("Advertise error"))
 610 #endif
 611 #ifdef ESRMNT
 612 _S(ESRMNT, N_("Srmount error"))
 613 #endif
 614 #ifdef ECOMM
 615 _S(ECOMM, N_("Communication error on send"))
 616 #endif
 617 #ifdef EDOTDOT
 618 _S(EDOTDOT, N_("RFS specific error"))
 619 #endif
 620 #ifdef ENOTUNIQ
 621 _S(ENOTUNIQ, N_("Name not unique on network"))
 622 #endif
 623 #ifdef EBADFD
 624 _S(EBADFD, N_("File descriptor in bad state"))
 625 #endif
 626 #ifdef EREMCHG
 627 _S(EREMCHG, N_("Remote address changed"))
 628 #endif
 629 #ifdef ELIBACC
 630 _S(ELIBACC, N_("Can not access a needed shared library"))
 631 #endif
 632 #ifdef ELIBBAD
 633 _S(ELIBBAD, N_("Accessing a corrupted shared library"))
 634 #endif
 635 #ifdef ELIBSCN
 636 _S(ELIBSCN, N_(".lib section in a.out corrupted"))
 637 #endif
 638 #ifdef ELIBMAX
 639 _S(ELIBMAX, N_("Attempting to link in too many shared libraries"))
 640 #endif
 641 #ifdef ELIBEXEC
 642 _S(ELIBEXEC, N_("Cannot exec a shared library directly"))
 643 #endif
 644 #ifdef ESTRPIPE
 645 _S(ESTRPIPE, N_("Streams pipe error"))
 646 #endif
 647 #ifdef EUCLEAN
 648 _S(EUCLEAN, N_("Structure needs cleaning"))
 649 #endif
 650 #ifdef ENOTNAM
 651 _S(ENOTNAM, N_("Not a XENIX named type file"))
 652 #endif
 653 #ifdef ENAVAIL
 654 _S(ENAVAIL, N_("No XENIX semaphores available"))
 655 #endif
 656 #ifdef EISNAM
 657 _S(EISNAM, N_("Is a named type file"))
 658 #endif
 659 #ifdef EREMOTEIO
 660 _S(EREMOTEIO, N_("Remote I/O error"))
 661 #endif
 662 #ifdef ENOMEDIUM
 663 _S(ENOMEDIUM, N_("No medium found"))
 664 #endif
 665 #ifdef EMEDIUMTYPE
 666 _S(EMEDIUMTYPE, N_("Wrong medium type"))
 667 #endif
 668 #ifdef ENOKEY
 669 _S(ENOKEY, N_("Required key not available"))
 670 #endif
 671 #ifdef EKEYEXPIRED
 672 _S(EKEYEXPIRED, N_("Key has expired"))
 673 #endif
 674 #ifdef EKEYREVOKED
 675 _S(EKEYREVOKED, N_("Key has been revoked"))
 676 #endif
 677 #ifdef EKEYREJECTED
 678 _S(EKEYREJECTED, N_("Key was rejected by service"))
 679 #endif
 680 #ifdef ERFKILL
 681 _S(ERFKILL, N_("Operation not possible due to RF-kill"))
 682 #endif
 683 #ifdef EHWPOISON
 684 _S(EHWPOISON, N_("Memory page has hardware error"))
 685 #endif
 686 #ifdef EBADRPC
 687 _S(EBADRPC, N_("RPC struct is bad"))
 688 #endif
 689 #ifdef EFTYPE
 690 /*
 691 TRANS The file was the wrong type for the
 692 TRANS operation, or a data file had the wrong format.
 693 TRANS
 694 TRANS On some systems @code{chmod} returns this error if you try to set the
 695 TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. */
 696 _S(EFTYPE, N_("Inappropriate file type or format"))
 697 #endif
 698 #ifdef EPROCUNAVAIL
 699 _S(EPROCUNAVAIL, N_("RPC bad procedure for program"))
 700 #endif
 701 #ifdef EAUTH
 702 _S(EAUTH, N_("Authentication error"))
 703 #endif
 704 #ifdef EDIED
 705 /*
 706 TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is
 707 TRANS translated by a program and the translator program dies while starting
 708 TRANS up, before it has connected to the file. */
 709 _S(EDIED, N_("Translator died"))
 710 #endif
 711 #ifdef ERPCMISMATCH
 712 _S(ERPCMISMATCH, N_("RPC version wrong"))
 713 #endif
 714 #ifdef EGREGIOUS
 715 /*
 716 TRANS You did @strong{what}? */
 717 _S(EGREGIOUS, N_("You really blew it this time"))
 718 #endif
 719 #ifdef EPROCLIM
 720 /*
 721 TRANS This means that the per-user limit on new process would be exceeded by
 722 TRANS an attempted @code{fork}.  @xref{Limits on Resources}, for details on
 723 TRANS the @code{RLIMIT_NPROC} limit. */
 724 _S(EPROCLIM, N_("Too many processes"))
 725 #endif
 726 #ifdef EGRATUITOUS
 727 /*
 728 TRANS This error code has no purpose. */
 729 _S(EGRATUITOUS, N_("Gratuitous error"))
 730 #endif
 731 #if defined (ENOTSUP) && ENOTSUP != EOPNOTSUPP
 732 /*
 733 TRANS A function returns this error when certain parameter
 734 TRANS values are valid, but the functionality they request is not available.
 735 TRANS This can mean that the function does not implement a particular command
 736 TRANS or option value or flag bit at all.  For functions that operate on some
 737 TRANS object given in a parameter, such as a file descriptor or a port, it
 738 TRANS might instead mean that only @emph{that specific object} (file
 739 TRANS descriptor, port, etc.) is unable to support the other parameters given;
 740 TRANS different file descriptors might support different ranges of parameter
 741 TRANS values.
 742 TRANS
 743 TRANS If the entire function is not available at all in the implementation,
 744 TRANS it returns @code{ENOSYS} instead. */
 745 _S(ENOTSUP, N_("Not supported"))
 746 #endif
 747 #ifdef EPROGMISMATCH
 748 _S(EPROGMISMATCH, N_("RPC program version wrong"))
 749 #endif
 750 #ifdef EBACKGROUND
 751 /*
 752 TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return
 753 TRANS this error for certain operations when the caller is not in the
 754 TRANS foreground process group of the terminal.  Users do not usually see this
 755 TRANS error because functions such as @code{read} and @code{write} translate
 756 TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal.  @xref{Job Control},
 757 TRANS for information on process groups and these signals. */
 758 _S(EBACKGROUND, N_("Inappropriate operation for background process"))
 759 #endif
 760 #ifdef EIEIO
 761 /*
 762 TRANS Go home and have a glass of warm, dairy-fresh milk.
 763 TRANS @c Okay.  Since you are dying to know, I'll tell you.
 764 TRANS @c This is a joke, obviously.  There is a children's song which begins,
 765 TRANS @c "Old McDonald had a farm, e-i-e-i-o."  Every time I see the (real)
 766 TRANS @c errno macro EIO, I think about that song.  Probably most of my
 767 TRANS @c compatriots who program on Unix do, too.  One of them must have stayed
 768 TRANS @c up a little too late one night and decided to add it to Hurd or Glibc.
 769 TRANS @c Whoever did it should be castigated, but it made me laugh.
 770 TRANS @c  --jtobey@channel1.com
 771 TRANS @c
 772 TRANS @c "bought the farm" means "died".  -jtobey
 773 TRANS @c
 774 TRANS @c Translators, please do not translate this litteraly, translate it into
 775 TRANS @c an idiomatic funny way of saying that the computer died. */
 776 _S(EIEIO, N_("Computer bought the farm"))
 777 #endif
 778 #if defined (EWOULDBLOCK) && EWOULDBLOCK != EAGAIN
 779 /*
 780 TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above).
 781 TRANS The values are always the same, on every operating system.
 782 TRANS
 783 TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a
 784 TRANS separate error code. */
 785 _S(EWOULDBLOCK, N_("Operation would block"))
 786 #endif
 787 #ifdef ENEEDAUTH
 788 _S(ENEEDAUTH, N_("Need authenticator"))
 789 #endif
 790 #ifdef ED
 791 /*
 792 TRANS The experienced user will know what is wrong.
 793 TRANS @c This error code is a joke.  Its perror text is part of the joke.
 794 TRANS @c Don't change it. */
 795 _S(ED, N_("?"))
 796 #endif
 797 #ifdef EPROGUNAVAIL
 798 _S(EPROGUNAVAIL, N_("RPC program not available"))
 799 #endif