1 /* Conversion from and to IBM933.
2 Copyright (C) 2000, 2001 Free Software Foundation, Inc.
3 This file is part of the GNU C Library.
4 Contributed by Masahide Washizawa <washi@yamato.ibm.co.jp>, 2000.
6 The GNU C Library is free software; you can redistribute it and/or
7 modify it under the terms of the GNU Library General Public License as
8 published by the Free Software Foundation; either version 2 of the
9 License, or (at your option) any later version.
11 The GNU C Library is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 Library General Public License for more details.
16 You should have received a copy of the GNU Library General Public
17 License along with the GNU C Library; see the file COPYING.LIB. If not,
18 write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
19 Boston, MA 02111-1307, USA. */
27 /* The shift sequences for this charset (it does not use ESC). */
28 #define SI 0x0F /* Shift In, host code to turn DBCS off. */
29 #define SO 0x0E /* Shift Out, host code to turn DBCS on. */
31 /* Definitions used in the body of the `gconv' function. */
32 #define CHARSET_NAME "IBM933//"
33 #define FROM_LOOP from_ibm933
34 #define TO_LOOP to_ibm933
35 #define MIN_NEEDED_FROM 1
36 #define MAX_NEEDED_FROM 2
37 #define MIN_NEEDED_TO 4
38 #define MAX_NEEDED_TO 4
39 #define PREPARE_LOOP \
41 int *curcsp = &data->__statep->__count;
42 #define EXTRA_LOOP_ARGS , curcsp
44 /* Definitions of initialization and destructor function. */
49 /* Since this is a stateful encoding we have to provide code which resets
50 the output state to the initial state. This has to be done during the
52 #define EMIT_SHIFT_TO_INIT \
53 if ((data->__statep->__count & ~7) != sb) \
56 data->__statep->__count &= 7; \
59 /* We are not in the initial state. To switch back we have \
61 if (__builtin_expect (outbuf >= outend, 0)) \
62 /* We don't have enough room in the output buffer. */ \
63 status = __GCONV_FULL_OUTPUT; \
66 /* Write out the shift sequence. */ \
68 data->__statep->__count &= 7; \
74 /* Since we might have to reset input pointer we must be able to save
75 and retore the state. */
76 #define SAVE_RESET_STATE(Save) \
78 save_curcs = *curcsp; \
83 /* Current codeset type. */
90 /* First, define the conversion function from IBM-933 to UCS4. */
91 #define MIN_NEEDED_INPUT MIN_NEEDED_FROM
92 #define MAX_NEEDED_INPUT MAX_NEEDED_FROM
93 #define MIN_NEEDED_OUTPUT MIN_NEEDED_TO
94 #define LOOPFCT FROM_LOOP
97 uint32_t ch = *inptr; \
100 if (__builtin_expect (ch, 0) == SO) \
102 /* Shift OUT, change to DBCS converter. */ \
105 result = __GCONV_ILLEGAL_INPUT; \
112 else if (__builtin_expect (ch, 0) == SI) \
114 /* Shift IN, change to SBCS converter. */ \
117 result = __GCONV_ILLEGAL_INPUT; \
127 /* Use the IBM933 table for single byte. */ \
128 res = __ibm933sb_to_ucs4[ch]; \
129 if (__builtin_expect (res, L'\1') == L'\0' && ch != '\0') \
131 /* This is an illegal character. */ \
132 if (! ignore_errors_p ()) \
134 result = __GCONV_ILLEGAL_INPUT; \
141 put32 (outptr, res); \
148 const struct gap *rp2 = __ibm933db_to_ucs4_idx; \
150 assert (curcs == db); \
152 /* Use the IBM933 table for double byte. */ \
153 if (__builtin_expect (inptr + 1 >= inend, 0)) \
155 /* The second character is not available. Store the \
156 intermediate result. */ \
157 result = __GCONV_INCOMPLETE_INPUT; \
161 ch = (ch * 0x100) + inptr[1]; \
162 while (ch > rp2->end) \
165 if (__builtin_expect (rp2 == NULL, 0) \
166 || __builtin_expect (ch < rp2->start, 0) \
167 || (res = __ibm933db_to_ucs4[ch + rp2->idx], \
168 __builtin_expect (res, L'\1') == L'\0' && ch != '\0')) \
170 /* This is an illegal character. */ \
171 if (! ignore_errors_p ()) \
173 result = __GCONV_ILLEGAL_INPUT; \
182 put32 (outptr, res); \
188 #define LOOP_NEED_FLAGS
189 #define EXTRA_LOOP_DECLS , int *curcsp
190 #define INIT_PARAMS int curcs = *curcsp & ~7
191 #define UPDATE_PARAMS *curcsp = curcs
192 #include <iconv/loop.c>
194 /* Next, define the other direction. */
195 #define MIN_NEEDED_INPUT MIN_NEEDED_TO
196 #define MIN_NEEDED_OUTPUT MIN_NEEDED_FROM
197 #define MAX_NEEDED_OUTPUT MAX_NEEDED_FROM
198 #define LOOPFCT TO_LOOP
201 uint32_t ch = get32 (inptr); \
202 const struct gap *rp1 = __ucs4_to_ibm933sb_idx; \
203 const struct gap *rp2 = __ucs4_to_ibm933db_idx; \
206 if (__builtin_expect (ch, 0) >= 0xffff) \
208 UNICODE_TAG_HANDLER (ch, 4); \
210 if (! ignore_errors_p ()) \
212 result = __GCONV_ILLEGAL_INPUT; \
220 while (ch > rp1->end) \
223 /* Use the UCS4 table for single byte. */ \
224 if (__builtin_expect (ch < rp1->start, 0) \
225 || (cp = __ucs4_to_ibm933sb[ch + rp1->idx], \
226 __builtin_expect (cp[0], L'\1') == L'\0' && ch != '\0')) \
228 /* Use the UCS4 table for double byte. */ \
229 while (ch > rp2->end) \
232 if (__builtin_expect (ch < rp2->start, 0) \
233 || (cp = __ucs4_to_ibm933db[ch + rp2->idx], \
234 __builtin_expect (cp[0], L'\1')==L'\0' && ch != '\0')) \
236 /* This is an illegal character. */ \
237 if (! ignore_errors_p ()) \
239 result = __GCONV_ILLEGAL_INPUT; \
248 if (__builtin_expect (outptr+1 > outend, 0)) \
250 result = __GCONV_FULL_OUTPUT; \
257 if (__builtin_expect (outptr + 2 > outend, 0)) \
259 result = __GCONV_FULL_OUTPUT; \
270 if (__builtin_expect (outptr + 1 > outend, 0)) \
272 result = __GCONV_FULL_OUTPUT; \
278 if (__builtin_expect (outptr + 1 > outend, 0)) \
280 result = __GCONV_FULL_OUTPUT; \
287 /* Now that we wrote the output increment the input pointer. */ \
290 #define LOOP_NEED_FLAGS
291 #define EXTRA_LOOP_DECLS , int *curcsp
292 #define INIT_PARAMS int curcs = *curcsp & ~7
293 #define UPDATE_PARAMS *curcsp = curcs
294 #include <iconv/loop.c>
296 /* Now define the toplevel functions. */
297 #include <iconv/skeleton.c>