sysdeps/gnu/errlist.c

   1 /* This file is generated from errno.texi by errlist.awk.  */
   2
   3 #include <errno.h>
   4 #include <libintl.h>
   5
   6 #ifndef ERR_REMAP
   7 # define ERR_REMAP(n) n
   8 #endif
   9
  10 #if !defined EMIT_ERR_MAX && !defined ERRLIST_NO_COMPAT
  11 # include <errlist-compat.h>
  12 #endif
  13 #ifdef ERR_MAX
  14 # define ERRLIST_SIZE ERR_MAX + 1
  15 #else
  16 # define ERR_MAX 0
  17 # define ERRLIST_SIZE
  18 #endif
  19 const char *const _sys_errlist_internal[ERRLIST_SIZE] =
  20   {
  21     [0] = N_("Success"),
  22 #ifdef EPERM
  23 /*
  24 TRANS Operation not permitted; only the owner of the file (or other resource)
  25 TRANS or processes with special privileges can perform the operation. */
  26     [ERR_REMAP (EPERM)] = N_("Operation not permitted"),
  27 # if EPERM > ERR_MAX
  28 # undef ERR_MAX
  29 # define ERR_MAX EPERM
  30 # endif
  31 #endif
  32 #ifdef ENOENT
  33 /*
  34 TRANS No such file or directory.  This is a ``file doesn't exist'' error
  35 TRANS for ordinary files that are referenced in contexts where they are
  36 TRANS expected to already exist. */
  37     [ERR_REMAP (ENOENT)] = N_("No such file or directory"),
  38 # if ENOENT > ERR_MAX
  39 # undef ERR_MAX
  40 # define ERR_MAX ENOENT
  41 # endif
  42 #endif
  43 #ifdef ESRCH
  44 /*
  45 TRANS No process matches the specified process ID. */
  46     [ERR_REMAP (ESRCH)] = N_("No such process"),
  47 # if ESRCH > ERR_MAX
  48 # undef ERR_MAX
  49 # define ERR_MAX ESRCH
  50 # endif
  51 #endif
  52 #ifdef EINTR
  53 /*
  54 TRANS Interrupted function call; an asynchronous signal occurred and prevented
  55 TRANS completion of the call.  When this happens, you should try the call
  56 TRANS again.
  57 TRANS
  58 TRANS You can choose to have functions resume after a signal that is handled,
  59 TRANS rather than failing with @code{EINTR}; see @ref{Interrupted
  60 TRANS Primitives}. */
  61     [ERR_REMAP (EINTR)] = N_("Interrupted system call"),
  62 # if EINTR > ERR_MAX
  63 # undef ERR_MAX
  64 # define ERR_MAX EINTR
  65 # endif
  66 #endif
  67 #ifdef EIO
  68 /*
  69 TRANS Input/output error; usually used for physical read or write errors. */
  70     [ERR_REMAP (EIO)] = N_("Input/output error"),
  71 # if EIO > ERR_MAX
  72 # undef ERR_MAX
  73 # define ERR_MAX EIO
  74 # endif
  75 #endif
  76 #ifdef ENXIO
  77 /*
  78 TRANS No such device or address.  The system tried to use the device
  79 TRANS represented by a file you specified, and it couldn't find the device.
  80 TRANS This can mean that the device file was installed incorrectly, or that
  81 TRANS the physical device is missing or not correctly attached to the
  82 TRANS computer. */
  83     [ERR_REMAP (ENXIO)] = N_("No such device or address"),
  84 # if ENXIO > ERR_MAX
  85 # undef ERR_MAX
  86 # define ERR_MAX ENXIO
  87 # endif
  88 #endif
  89 #ifdef E2BIG
  90 /*
  91 TRANS Argument list too long; used when the arguments passed to a new program
  92 TRANS being executed with one of the @code{exec} functions (@pxref{Executing a
  93 TRANS File}) occupy too much memory space.  This condition never arises on
  94 TRANS @gnuhurdsystems{}. */
  95     [ERR_REMAP (E2BIG)] = N_("Argument list too long"),
  96 # if E2BIG > ERR_MAX
  97 # undef ERR_MAX
  98 # define ERR_MAX E2BIG
  99 # endif
 100 #endif
 101 #ifdef ENOEXEC
 102 /*
 103 TRANS Invalid executable file format.  This condition is detected by the
 104 TRANS @code{exec} functions; see @ref{Executing a File}. */
 105     [ERR_REMAP (ENOEXEC)] = N_("Exec format error"),
 106 # if ENOEXEC > ERR_MAX
 107 # undef ERR_MAX
 108 # define ERR_MAX ENOEXEC
 109 # endif
 110 #endif
 111 #ifdef EBADF
 112 /*
 113 TRANS Bad file descriptor; for example, I/O on a descriptor that has been
 114 TRANS closed or reading from a descriptor open only for writing (or vice
 115 TRANS versa). */
 116     [ERR_REMAP (EBADF)] = N_("Bad file descriptor"),
 117 # if EBADF > ERR_MAX
 118 # undef ERR_MAX
 119 # define ERR_MAX EBADF
 120 # endif
 121 #endif
 122 #ifdef ECHILD
 123 /*
 124 TRANS There are no child processes.  This error happens on operations that are
 125 TRANS supposed to manipulate child processes, when there aren't any processes
 126 TRANS to manipulate. */
 127     [ERR_REMAP (ECHILD)] = N_("No child processes"),
 128 # if ECHILD > ERR_MAX
 129 # undef ERR_MAX
 130 # define ERR_MAX ECHILD
 131 # endif
 132 #endif
 133 #ifdef EDEADLK
 134 /*
 135 TRANS Deadlock avoided; allocating a system resource would have resulted in a
 136 TRANS deadlock situation.  The system does not guarantee that it will notice
 137 TRANS all such situations.  This error means you got lucky and the system
 138 TRANS noticed; it might just hang.  @xref{File Locks}, for an example. */
 139     [ERR_REMAP (EDEADLK)] = N_("Resource deadlock avoided"),
 140 # if EDEADLK > ERR_MAX
 141 # undef ERR_MAX
 142 # define ERR_MAX EDEADLK
 143 # endif
 144 #endif
 145 #ifdef ENOMEM
 146 /*
 147 TRANS No memory available.  The system cannot allocate more virtual memory
 148 TRANS because its capacity is full. */
 149     [ERR_REMAP (ENOMEM)] = N_("Cannot allocate memory"),
 150 # if ENOMEM > ERR_MAX
 151 # undef ERR_MAX
 152 # define ERR_MAX ENOMEM
 153 # endif
 154 #endif
 155 #ifdef EACCES
 156 /*
 157 TRANS Permission denied; the file permissions do not allow the attempted operation. */
 158     [ERR_REMAP (EACCES)] = N_("Permission denied"),
 159 # if EACCES > ERR_MAX
 160 # undef ERR_MAX
 161 # define ERR_MAX EACCES
 162 # endif
 163 #endif
 164 #ifdef EFAULT
 165 /*
 166 TRANS Bad address; an invalid pointer was detected.
 167 TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. */
 168     [ERR_REMAP (EFAULT)] = N_("Bad address"),
 169 # if EFAULT > ERR_MAX
 170 # undef ERR_MAX
 171 # define ERR_MAX EFAULT
 172 # endif
 173 #endif
 174 #ifdef ENOTBLK
 175 /*
 176 TRANS A file that isn't a block special file was given in a situation that
 177 TRANS requires one.  For example, trying to mount an ordinary file as a file
 178 TRANS system in Unix gives this error. */
 179     [ERR_REMAP (ENOTBLK)] = N_("Block device required"),
 180 # if ENOTBLK > ERR_MAX
 181 # undef ERR_MAX
 182 # define ERR_MAX ENOTBLK
 183 # endif
 184 #endif
 185 #ifdef EBUSY
 186 /*
 187 TRANS Resource busy; a system resource that can't be shared is already in use.
 188 TRANS For example, if you try to delete a file that is the root of a currently
 189 TRANS mounted filesystem, you get this error. */
 190     [ERR_REMAP (EBUSY)] = N_("Device or resource busy"),
 191 # if EBUSY > ERR_MAX
 192 # undef ERR_MAX
 193 # define ERR_MAX EBUSY
 194 # endif
 195 #endif
 196 #ifdef EEXIST
 197 /*
 198 TRANS File exists; an existing file was specified in a context where it only
 199 TRANS makes sense to specify a new file. */
 200     [ERR_REMAP (EEXIST)] = N_("File exists"),
 201 # if EEXIST > ERR_MAX
 202 # undef ERR_MAX
 203 # define ERR_MAX EEXIST
 204 # endif
 205 #endif
 206 #ifdef EXDEV
 207 /*
 208 TRANS An attempt to make an improper link across file systems was detected.
 209 TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but
 210 TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). */
 211     [ERR_REMAP (EXDEV)] = N_("Invalid cross-device link"),
 212 # if EXDEV > ERR_MAX
 213 # undef ERR_MAX
 214 # define ERR_MAX EXDEV
 215 # endif
 216 #endif
 217 #ifdef ENODEV
 218 /*
 219 TRANS The wrong type of device was given to a function that expects a
 220 TRANS particular sort of device. */
 221     [ERR_REMAP (ENODEV)] = N_("No such device"),
 222 # if ENODEV > ERR_MAX
 223 # undef ERR_MAX
 224 # define ERR_MAX ENODEV
 225 # endif
 226 #endif
 227 #ifdef ENOTDIR
 228 /*
 229 TRANS A file that isn't a directory was specified when a directory is required. */
 230     [ERR_REMAP (ENOTDIR)] = N_("Not a directory"),
 231 # if ENOTDIR > ERR_MAX
 232 # undef ERR_MAX
 233 # define ERR_MAX ENOTDIR
 234 # endif
 235 #endif
 236 #ifdef EISDIR
 237 /*
 238 TRANS File is a directory; you cannot open a directory for writing,
 239 TRANS or create or remove hard links to it. */
 240     [ERR_REMAP (EISDIR)] = N_("Is a directory"),
 241 # if EISDIR > ERR_MAX
 242 # undef ERR_MAX
 243 # define ERR_MAX EISDIR
 244 # endif
 245 #endif
 246 #ifdef EINVAL
 247 /*
 248 TRANS Invalid argument.  This is used to indicate various kinds of problems
 249 TRANS with passing the wrong argument to a library function. */
 250     [ERR_REMAP (EINVAL)] = N_("Invalid argument"),
 251 # if EINVAL > ERR_MAX
 252 # undef ERR_MAX
 253 # define ERR_MAX EINVAL
 254 # endif
 255 #endif
 256 #ifdef EMFILE
 257 /*
 258 TRANS The current process has too many files open and can't open any more.
 259 TRANS Duplicate descriptors do count toward this limit.
 260 TRANS
 261 TRANS In BSD and GNU, the number of open files is controlled by a resource
 262 TRANS limit that can usually be increased.  If you get this error, you might
 263 TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited;
 264 TRANS @pxref{Limits on Resources}. */
 265     [ERR_REMAP (EMFILE)] = N_("Too many open files"),
 266 # if EMFILE > ERR_MAX
 267 # undef ERR_MAX
 268 # define ERR_MAX EMFILE
 269 # endif
 270 #endif
 271 #ifdef ENFILE
 272 /*
 273 TRANS There are too many distinct file openings in the entire system.  Note
 274 TRANS that any number of linked channels count as just one file opening; see
 275 TRANS @ref{Linked Channels}.  This error never occurs on @gnuhurdsystems{}. */
 276     [ERR_REMAP (ENFILE)] = N_("Too many open files in system"),
 277 # if ENFILE > ERR_MAX
 278 # undef ERR_MAX
 279 # define ERR_MAX ENFILE
 280 # endif
 281 #endif
 282 #ifdef ENOTTY
 283 /*
 284 TRANS Inappropriate I/O control operation, such as trying to set terminal
 285 TRANS modes on an ordinary file. */
 286     [ERR_REMAP (ENOTTY)] = N_("Inappropriate ioctl for device"),
 287 # if ENOTTY > ERR_MAX
 288 # undef ERR_MAX
 289 # define ERR_MAX ENOTTY
 290 # endif
 291 #endif
 292 #ifdef ETXTBSY
 293 /*
 294 TRANS An attempt to execute a file that is currently open for writing, or
 295 TRANS write to a file that is currently being executed.  Often using a
 296 TRANS debugger to run a program is considered having it open for writing and
 297 TRANS will cause this error.  (The name stands for ``text file busy''.)  This
 298 TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. */
 299     [ERR_REMAP (ETXTBSY)] = N_("Text file busy"),
 300 # if ETXTBSY > ERR_MAX
 301 # undef ERR_MAX
 302 # define ERR_MAX ETXTBSY
 303 # endif
 304 #endif
 305 #ifdef EFBIG
 306 /*
 307 TRANS File too big; the size of a file would be larger than allowed by the system. */
 308     [ERR_REMAP (EFBIG)] = N_("File too large"),
 309 # if EFBIG > ERR_MAX
 310 # undef ERR_MAX
 311 # define ERR_MAX EFBIG
 312 # endif
 313 #endif
 314 #ifdef ENOSPC
 315 /*
 316 TRANS No space left on device; write operation on a file failed because the
 317 TRANS disk is full. */
 318     [ERR_REMAP (ENOSPC)] = N_("No space left on device"),
 319 # if ENOSPC > ERR_MAX
 320 # undef ERR_MAX
 321 # define ERR_MAX ENOSPC
 322 # endif
 323 #endif
 324 #ifdef ESPIPE
 325 /*
 326 TRANS Invalid seek operation (such as on a pipe). */
 327     [ERR_REMAP (ESPIPE)] = N_("Illegal seek"),
 328 # if ESPIPE > ERR_MAX
 329 # undef ERR_MAX
 330 # define ERR_MAX ESPIPE
 331 # endif
 332 #endif
 333 #ifdef EROFS
 334 /*
 335 TRANS An attempt was made to modify something on a read-only file system. */
 336     [ERR_REMAP (EROFS)] = N_("Read-only file system"),
 337 # if EROFS > ERR_MAX
 338 # undef ERR_MAX
 339 # define ERR_MAX EROFS
 340 # endif
 341 #endif
 342 #ifdef EMLINK
 343 /*
 344 TRANS Too many links; the link count of a single file would become too large.
 345 TRANS @code{rename} can cause this error if the file being renamed already has
 346 TRANS as many links as it can take (@pxref{Renaming Files}). */
 347     [ERR_REMAP (EMLINK)] = N_("Too many links"),
 348 # if EMLINK > ERR_MAX
 349 # undef ERR_MAX
 350 # define ERR_MAX EMLINK
 351 # endif
 352 #endif
 353 #ifdef EPIPE
 354 /*
 355 TRANS Broken pipe; there is no process reading from the other end of a pipe.
 356 TRANS Every library function that returns this error code also generates a
 357 TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled
 358 TRANS or blocked.  Thus, your program will never actually see @code{EPIPE}
 359 TRANS unless it has handled or blocked @code{SIGPIPE}. */
 360     [ERR_REMAP (EPIPE)] = N_("Broken pipe"),
 361 # if EPIPE > ERR_MAX
 362 # undef ERR_MAX
 363 # define ERR_MAX EPIPE
 364 # endif
 365 #endif
 366 #ifdef EDOM
 367 /*
 368 TRANS Domain error; used by mathematical functions when an argument value does
 369 TRANS not fall into the domain over which the function is defined. */
 370     [ERR_REMAP (EDOM)] = N_("Numerical argument out of domain"),
 371 # if EDOM > ERR_MAX
 372 # undef ERR_MAX
 373 # define ERR_MAX EDOM
 374 # endif
 375 #endif
 376 #ifdef ERANGE
 377 /*
 378 TRANS Range error; used by mathematical functions when the result value is
 379 TRANS not representable because of overflow or underflow. */
 380     [ERR_REMAP (ERANGE)] = N_("Numerical result out of range"),
 381 # if ERANGE > ERR_MAX
 382 # undef ERR_MAX
 383 # define ERR_MAX ERANGE
 384 # endif
 385 #endif
 386 #ifdef EAGAIN
 387 /*
 388 TRANS Resource temporarily unavailable; the call might work if you try again
 389 TRANS later.  The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN};
 390 TRANS they are always the same in @theglibc{}.
 391 TRANS
 392 TRANS This error can happen in a few different situations:
 393 TRANS
 394 TRANS @itemize @bullet
 395 TRANS @item
 396 TRANS An operation that would block was attempted on an object that has
 397 TRANS non-blocking mode selected.  Trying the same operation again will block
 398 TRANS until some external condition makes it possible to read, write, or
 399 TRANS connect (whatever the operation).  You can use @code{select} to find out
 400 TRANS when the operation will be possible; @pxref{Waiting for I/O}.
 401 TRANS
 402 TRANS @strong{Portability Note:} In many older Unix systems, this condition
 403 TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code
 404 TRANS different from @code{EAGAIN}.  To make your program portable, you should
 405 TRANS check for both codes and treat them the same.
 406 TRANS
 407 TRANS @item
 408 TRANS A temporary resource shortage made an operation impossible.  @code{fork}
 409 TRANS can return this error.  It indicates that the shortage is expected to
 410 TRANS pass, so your program can try the call again later and it may succeed.
 411 TRANS It is probably a good idea to delay for a few seconds before trying it
 412 TRANS again, to allow time for other processes to release scarce resources.
 413 TRANS Such shortages are usually fairly serious and affect the whole system,
 414 TRANS so usually an interactive program should report the error to the user
 415 TRANS and return to its command loop.
 416 TRANS @end itemize */
 417     [ERR_REMAP (EAGAIN)] = N_("Resource temporarily unavailable"),
 418 # if EAGAIN > ERR_MAX
 419 # undef ERR_MAX
 420 # define ERR_MAX EAGAIN
 421 # endif
 422 #endif
 423 #if defined (EWOULDBLOCK) && EWOULDBLOCK != EAGAIN
 424 /*
 425 TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above).
 426 TRANS The values are always the same, on every operating system.
 427 TRANS
 428 TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a
 429 TRANS separate error code. */
 430     [ERR_REMAP (EWOULDBLOCK)] = N_("Operation would block"),
 431 # if EWOULDBLOCK > ERR_MAX
 432 # undef ERR_MAX
 433 # define ERR_MAX EWOULDBLOCK
 434 # endif
 435 #endif
 436 #ifdef EINPROGRESS
 437 /*
 438 TRANS An operation that cannot complete immediately was initiated on an object
 439 TRANS that has non-blocking mode selected.  Some functions that must always
 440 TRANS block (such as @code{connect}; @pxref{Connecting}) never return
 441 TRANS @code{EAGAIN}.  Instead, they return @code{EINPROGRESS} to indicate that
 442 TRANS the operation has begun and will take some time.  Attempts to manipulate
 443 TRANS the object before the call completes return @code{EALREADY}.  You can
 444 TRANS use the @code{select} function to find out when the pending operation
 445 TRANS has completed; @pxref{Waiting for I/O}. */
 446     [ERR_REMAP (EINPROGRESS)] = N_("Operation now in progress"),
 447 # if EINPROGRESS > ERR_MAX
 448 # undef ERR_MAX
 449 # define ERR_MAX EINPROGRESS
 450 # endif
 451 #endif
 452 #ifdef EALREADY
 453 /*
 454 TRANS An operation is already in progress on an object that has non-blocking
 455 TRANS mode selected. */
 456     [ERR_REMAP (EALREADY)] = N_("Operation already in progress"),
 457 # if EALREADY > ERR_MAX
 458 # undef ERR_MAX
 459 # define ERR_MAX EALREADY
 460 # endif
 461 #endif
 462 #ifdef ENOTSOCK
 463 /*
 464 TRANS A file that isn't a socket was specified when a socket is required. */
 465     [ERR_REMAP (ENOTSOCK)] = N_("Socket operation on non-socket"),
 466 # if ENOTSOCK > ERR_MAX
 467 # undef ERR_MAX
 468 # define ERR_MAX ENOTSOCK
 469 # endif
 470 #endif
 471 #ifdef EMSGSIZE
 472 /*
 473 TRANS The size of a message sent on a socket was larger than the supported
 474 TRANS maximum size. */
 475     [ERR_REMAP (EMSGSIZE)] = N_("Message too long"),
 476 # if EMSGSIZE > ERR_MAX
 477 # undef ERR_MAX
 478 # define ERR_MAX EMSGSIZE
 479 # endif
 480 #endif
 481 #ifdef EPROTOTYPE
 482 /*
 483 TRANS The socket type does not support the requested communications protocol. */
 484     [ERR_REMAP (EPROTOTYPE)] = N_("Protocol wrong type for socket"),
 485 # if EPROTOTYPE > ERR_MAX
 486 # undef ERR_MAX
 487 # define ERR_MAX EPROTOTYPE
 488 # endif
 489 #endif
 490 #ifdef ENOPROTOOPT
 491 /*
 492 TRANS You specified a socket option that doesn't make sense for the
 493 TRANS particular protocol being used by the socket.  @xref{Socket Options}. */
 494     [ERR_REMAP (ENOPROTOOPT)] = N_("Protocol not available"),
 495 # if ENOPROTOOPT > ERR_MAX
 496 # undef ERR_MAX
 497 # define ERR_MAX ENOPROTOOPT
 498 # endif
 499 #endif
 500 #ifdef EPROTONOSUPPORT
 501 /*
 502 TRANS The socket domain does not support the requested communications protocol
 503 TRANS (perhaps because the requested protocol is completely invalid).
 504 TRANS @xref{Creating a Socket}. */
 505     [ERR_REMAP (EPROTONOSUPPORT)] = N_("Protocol not supported"),
 506 # if EPROTONOSUPPORT > ERR_MAX
 507 # undef ERR_MAX
 508 # define ERR_MAX EPROTONOSUPPORT
 509 # endif
 510 #endif
 511 #ifdef ESOCKTNOSUPPORT
 512 /*
 513 TRANS The socket type is not supported. */
 514     [ERR_REMAP (ESOCKTNOSUPPORT)] = N_("Socket type not supported"),
 515 # if ESOCKTNOSUPPORT > ERR_MAX
 516 # undef ERR_MAX
 517 # define ERR_MAX ESOCKTNOSUPPORT
 518 # endif
 519 #endif
 520 #ifdef EOPNOTSUPP
 521 /*
 522 TRANS The operation you requested is not supported.  Some socket functions
 523 TRANS don't make sense for all types of sockets, and others may not be
 524 TRANS implemented for all communications protocols.  On @gnuhurdsystems{}, this
 525 TRANS error can happen for many calls when the object does not support the
 526 TRANS particular operation; it is a generic indication that the server knows
 527 TRANS nothing to do for that call. */
 528     [ERR_REMAP (EOPNOTSUPP)] = N_("Operation not supported"),
 529 # if EOPNOTSUPP > ERR_MAX
 530 # undef ERR_MAX
 531 # define ERR_MAX EOPNOTSUPP
 532 # endif
 533 #endif
 534 #ifdef EPFNOSUPPORT
 535 /*
 536 TRANS The socket communications protocol family you requested is not supported. */
 537     [ERR_REMAP (EPFNOSUPPORT)] = N_("Protocol family not supported"),
 538 # if EPFNOSUPPORT > ERR_MAX
 539 # undef ERR_MAX
 540 # define ERR_MAX EPFNOSUPPORT
 541 # endif
 542 #endif
 543 #ifdef EAFNOSUPPORT
 544 /*
 545 TRANS The address family specified for a socket is not supported; it is
 546 TRANS inconsistent with the protocol being used on the socket.  @xref{Sockets}. */
 547     [ERR_REMAP (EAFNOSUPPORT)] = N_("Address family not supported by protocol"),
 548 # if EAFNOSUPPORT > ERR_MAX
 549 # undef ERR_MAX
 550 # define ERR_MAX EAFNOSUPPORT
 551 # endif
 552 #endif
 553 #ifdef EADDRINUSE
 554 /*
 555 TRANS The requested socket address is already in use.  @xref{Socket Addresses}. */
 556     [ERR_REMAP (EADDRINUSE)] = N_("Address already in use"),
 557 # if EADDRINUSE > ERR_MAX
 558 # undef ERR_MAX
 559 # define ERR_MAX EADDRINUSE
 560 # endif
 561 #endif
 562 #ifdef EADDRNOTAVAIL
 563 /*
 564 TRANS The requested socket address is not available; for example, you tried
 565 TRANS to give a socket a name that doesn't match the local host name.
 566 TRANS @xref{Socket Addresses}. */
 567     [ERR_REMAP (EADDRNOTAVAIL)] = N_("Cannot assign requested address"),
 568 # if EADDRNOTAVAIL > ERR_MAX
 569 # undef ERR_MAX
 570 # define ERR_MAX EADDRNOTAVAIL
 571 # endif
 572 #endif
 573 #ifdef ENETDOWN
 574 /*
 575 TRANS A socket operation failed because the network was down. */
 576     [ERR_REMAP (ENETDOWN)] = N_("Network is down"),
 577 # if ENETDOWN > ERR_MAX
 578 # undef ERR_MAX
 579 # define ERR_MAX ENETDOWN
 580 # endif
 581 #endif
 582 #ifdef ENETUNREACH
 583 /*
 584 TRANS A socket operation failed because the subnet containing the remote host
 585 TRANS was unreachable. */
 586     [ERR_REMAP (ENETUNREACH)] = N_("Network is unreachable"),
 587 # if ENETUNREACH > ERR_MAX
 588 # undef ERR_MAX
 589 # define ERR_MAX ENETUNREACH
 590 # endif
 591 #endif
 592 #ifdef ENETRESET
 593 /*
 594 TRANS A network connection was reset because the remote host crashed. */
 595     [ERR_REMAP (ENETRESET)] = N_("Network dropped connection on reset"),
 596 # if ENETRESET > ERR_MAX
 597 # undef ERR_MAX
 598 # define ERR_MAX ENETRESET
 599 # endif
 600 #endif
 601 #ifdef ECONNABORTED
 602 /*
 603 TRANS A network connection was aborted locally. */
 604     [ERR_REMAP (ECONNABORTED)] = N_("Software caused connection abort"),
 605 # if ECONNABORTED > ERR_MAX
 606 # undef ERR_MAX
 607 # define ERR_MAX ECONNABORTED
 608 # endif
 609 #endif
 610 #ifdef ECONNRESET
 611 /*
 612 TRANS A network connection was closed for reasons outside the control of the
 613 TRANS local host, such as by the remote machine rebooting or an unrecoverable
 614 TRANS protocol violation. */
 615     [ERR_REMAP (ECONNRESET)] = N_("Connection reset by peer"),
 616 # if ECONNRESET > ERR_MAX
 617 # undef ERR_MAX
 618 # define ERR_MAX ECONNRESET
 619 # endif
 620 #endif
 621 #ifdef ENOBUFS
 622 /*
 623 TRANS The kernel's buffers for I/O operations are all in use.  In GNU, this
 624 TRANS error is always synonymous with @code{ENOMEM}; you may get one or the
 625 TRANS other from network operations. */
 626     [ERR_REMAP (ENOBUFS)] = N_("No buffer space available"),
 627 # if ENOBUFS > ERR_MAX
 628 # undef ERR_MAX
 629 # define ERR_MAX ENOBUFS
 630 # endif
 631 #endif
 632 #ifdef EISCONN
 633 /*
 634 TRANS You tried to connect a socket that is already connected.
 635 TRANS @xref{Connecting}. */
 636     [ERR_REMAP (EISCONN)] = N_("Transport endpoint is already connected"),
 637 # if EISCONN > ERR_MAX
 638 # undef ERR_MAX
 639 # define ERR_MAX EISCONN
 640 # endif
 641 #endif
 642 #ifdef ENOTCONN
 643 /*
 644 TRANS The socket is not connected to anything.  You get this error when you
 645 TRANS try to transmit data over a socket, without first specifying a
 646 TRANS destination for the data.  For a connectionless socket (for datagram
 647 TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. */
 648     [ERR_REMAP (ENOTCONN)] = N_("Transport endpoint is not connected"),
 649 # if ENOTCONN > ERR_MAX
 650 # undef ERR_MAX
 651 # define ERR_MAX ENOTCONN
 652 # endif
 653 #endif
 654 #ifdef EDESTADDRREQ
 655 /*
 656 TRANS No default destination address was set for the socket.  You get this
 657 TRANS error when you try to transmit data over a connectionless socket,
 658 TRANS without first specifying a destination for the data with @code{connect}. */
 659     [ERR_REMAP (EDESTADDRREQ)] = N_("Destination address required"),
 660 # if EDESTADDRREQ > ERR_MAX
 661 # undef ERR_MAX
 662 # define ERR_MAX EDESTADDRREQ
 663 # endif
 664 #endif
 665 #ifdef ESHUTDOWN
 666 /*
 667 TRANS The socket has already been shut down. */
 668     [ERR_REMAP (ESHUTDOWN)] = N_("Cannot send after transport endpoint shutdown"),
 669 # if ESHUTDOWN > ERR_MAX
 670 # undef ERR_MAX
 671 # define ERR_MAX ESHUTDOWN
 672 # endif
 673 #endif
 674 #ifdef ETOOMANYREFS
 675 /*
 676 TRANS ??? */
 677     [ERR_REMAP (ETOOMANYREFS)] = N_("Too many references: cannot splice"),
 678 # if ETOOMANYREFS > ERR_MAX
 679 # undef ERR_MAX
 680 # define ERR_MAX ETOOMANYREFS
 681 # endif
 682 #endif
 683 #ifdef ETIMEDOUT
 684 /*
 685 TRANS A socket operation with a specified timeout received no response during
 686 TRANS the timeout period. */
 687     [ERR_REMAP (ETIMEDOUT)] = N_("Connection timed out"),
 688 # if ETIMEDOUT > ERR_MAX
 689 # undef ERR_MAX
 690 # define ERR_MAX ETIMEDOUT
 691 # endif
 692 #endif
 693 #ifdef ECONNREFUSED
 694 /*
 695 TRANS A remote host refused to allow the network connection (typically because
 696 TRANS it is not running the requested service). */
 697     [ERR_REMAP (ECONNREFUSED)] = N_("Connection refused"),
 698 # if ECONNREFUSED > ERR_MAX
 699 # undef ERR_MAX
 700 # define ERR_MAX ECONNREFUSED
 701 # endif
 702 #endif
 703 #ifdef ELOOP
 704 /*
 705 TRANS Too many levels of symbolic links were encountered in looking up a file name.
 706 TRANS This often indicates a cycle of symbolic links. */
 707     [ERR_REMAP (ELOOP)] = N_("Too many levels of symbolic links"),
 708 # if ELOOP > ERR_MAX
 709 # undef ERR_MAX
 710 # define ERR_MAX ELOOP
 711 # endif
 712 #endif
 713 #ifdef ENAMETOOLONG
 714 /*
 715 TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for
 716 TRANS Files}) or host name too long (in @code{gethostname} or
 717 TRANS @code{sethostname}; @pxref{Host Identification}). */
 718     [ERR_REMAP (ENAMETOOLONG)] = N_("File name too long"),
 719 # if ENAMETOOLONG > ERR_MAX
 720 # undef ERR_MAX
 721 # define ERR_MAX ENAMETOOLONG
 722 # endif
 723 #endif
 724 #ifdef EHOSTDOWN
 725 /*
 726 TRANS The remote host for a requested network connection is down. */
 727     [ERR_REMAP (EHOSTDOWN)] = N_("Host is down"),
 728 # if EHOSTDOWN > ERR_MAX
 729 # undef ERR_MAX
 730 # define ERR_MAX EHOSTDOWN
 731 # endif
 732 #endif
 733 #ifdef EHOSTUNREACH
 734 /*
 735 TRANS The remote host for a requested network connection is not reachable. */
 736     [ERR_REMAP (EHOSTUNREACH)] = N_("No route to host"),
 737 # if EHOSTUNREACH > ERR_MAX
 738 # undef ERR_MAX
 739 # define ERR_MAX EHOSTUNREACH
 740 # endif
 741 #endif
 742 #ifdef ENOTEMPTY
 743 /*
 744 TRANS Directory not empty, where an empty directory was expected.  Typically,
 745 TRANS this error occurs when you are trying to delete a directory. */
 746     [ERR_REMAP (ENOTEMPTY)] = N_("Directory not empty"),
 747 # if ENOTEMPTY > ERR_MAX
 748 # undef ERR_MAX
 749 # define ERR_MAX ENOTEMPTY
 750 # endif
 751 #endif
 752 #ifdef EPROCLIM
 753 /*
 754 TRANS This means that the per-user limit on new process would be exceeded by
 755 TRANS an attempted @code{fork}.  @xref{Limits on Resources}, for details on
 756 TRANS the @code{RLIMIT_NPROC} limit. */
 757     [ERR_REMAP (EPROCLIM)] = N_("Too many processes"),
 758 # if EPROCLIM > ERR_MAX
 759 # undef ERR_MAX
 760 # define ERR_MAX EPROCLIM
 761 # endif
 762 #endif
 763 #ifdef EUSERS
 764 /*
 765 TRANS The file quota system is confused because there are too many users.
 766 TRANS @c This can probably happen in a GNU system when using NFS. */
 767     [ERR_REMAP (EUSERS)] = N_("Too many users"),
 768 # if EUSERS > ERR_MAX
 769 # undef ERR_MAX
 770 # define ERR_MAX EUSERS
 771 # endif
 772 #endif
 773 #ifdef EDQUOT
 774 /*
 775 TRANS The user's disk quota was exceeded. */
 776     [ERR_REMAP (EDQUOT)] = N_("Disk quota exceeded"),
 777 # if EDQUOT > ERR_MAX
 778 # undef ERR_MAX
 779 # define ERR_MAX EDQUOT
 780 # endif
 781 #endif
 782 #ifdef ESTALE
 783 /*
 784 TRANS Stale file handle.  This indicates an internal confusion in the
 785 TRANS file system which is due to file system rearrangements on the server host
 786 TRANS for NFS file systems or corruption in other file systems.
 787 TRANS Repairing this condition usually requires unmounting, possibly repairing
 788 TRANS and remounting the file system. */
 789     [ERR_REMAP (ESTALE)] = N_("Stale file handle"),
 790 # if ESTALE > ERR_MAX
 791 # undef ERR_MAX
 792 # define ERR_MAX ESTALE
 793 # endif
 794 #endif
 795 #ifdef EREMOTE
 796 /*
 797 TRANS An attempt was made to NFS-mount a remote file system with a file name that
 798 TRANS already specifies an NFS-mounted file.
 799 TRANS (This is an error on some operating systems, but we expect it to work
 800 TRANS properly on @gnuhurdsystems{}, making this error code impossible.) */
 801     [ERR_REMAP (EREMOTE)] = N_("Object is remote"),
 802 # if EREMOTE > ERR_MAX
 803 # undef ERR_MAX
 804 # define ERR_MAX EREMOTE
 805 # endif
 806 #endif
 807 #ifdef EBADRPC
 808 /*
 809 TRANS ??? */
 810     [ERR_REMAP (EBADRPC)] = N_("RPC struct is bad"),
 811 # if EBADRPC > ERR_MAX
 812 # undef ERR_MAX
 813 # define ERR_MAX EBADRPC
 814 # endif
 815 #endif
 816 #ifdef ERPCMISMATCH
 817 /*
 818 TRANS ??? */
 819     [ERR_REMAP (ERPCMISMATCH)] = N_("RPC version wrong"),
 820 # if ERPCMISMATCH > ERR_MAX
 821 # undef ERR_MAX
 822 # define ERR_MAX ERPCMISMATCH
 823 # endif
 824 #endif
 825 #ifdef EPROGUNAVAIL
 826 /*
 827 TRANS ??? */
 828     [ERR_REMAP (EPROGUNAVAIL)] = N_("RPC program not available"),
 829 # if EPROGUNAVAIL > ERR_MAX
 830 # undef ERR_MAX
 831 # define ERR_MAX EPROGUNAVAIL
 832 # endif
 833 #endif
 834 #ifdef EPROGMISMATCH
 835 /*
 836 TRANS ??? */
 837     [ERR_REMAP (EPROGMISMATCH)] = N_("RPC program version wrong"),
 838 # if EPROGMISMATCH > ERR_MAX
 839 # undef ERR_MAX
 840 # define ERR_MAX EPROGMISMATCH
 841 # endif
 842 #endif
 843 #ifdef EPROCUNAVAIL
 844 /*
 845 TRANS ??? */
 846     [ERR_REMAP (EPROCUNAVAIL)] = N_("RPC bad procedure for program"),
 847 # if EPROCUNAVAIL > ERR_MAX
 848 # undef ERR_MAX
 849 # define ERR_MAX EPROCUNAVAIL
 850 # endif
 851 #endif
 852 #ifdef ENOLCK
 853 /*
 854 TRANS No locks available.  This is used by the file locking facilities; see
 855 TRANS @ref{File Locks}.  This error is never generated by @gnuhurdsystems{}, but
 856 TRANS it can result from an operation to an NFS server running another
 857 TRANS operating system. */
 858     [ERR_REMAP (ENOLCK)] = N_("No locks available"),
 859 # if ENOLCK > ERR_MAX
 860 # undef ERR_MAX
 861 # define ERR_MAX ENOLCK
 862 # endif
 863 #endif
 864 #ifdef EFTYPE
 865 /*
 866 TRANS Inappropriate file type or format.  The file was the wrong type for the
 867 TRANS operation, or a data file had the wrong format.
 868 TRANS
 869 TRANS On some systems @code{chmod} returns this error if you try to set the
 870 TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. */
 871     [ERR_REMAP (EFTYPE)] = N_("Inappropriate file type or format"),
 872 # if EFTYPE > ERR_MAX
 873 # undef ERR_MAX
 874 # define ERR_MAX EFTYPE
 875 # endif
 876 #endif
 877 #ifdef EAUTH
 878 /*
 879 TRANS ??? */
 880     [ERR_REMAP (EAUTH)] = N_("Authentication error"),
 881 # if EAUTH > ERR_MAX
 882 # undef ERR_MAX
 883 # define ERR_MAX EAUTH
 884 # endif
 885 #endif
 886 #ifdef ENEEDAUTH
 887 /*
 888 TRANS ??? */
 889     [ERR_REMAP (ENEEDAUTH)] = N_("Need authenticator"),
 890 # if ENEEDAUTH > ERR_MAX
 891 # undef ERR_MAX
 892 # define ERR_MAX ENEEDAUTH
 893 # endif
 894 #endif
 895 #ifdef ENOSYS
 896 /*
 897 TRANS Function not implemented.  This indicates that the function called is
 898 TRANS not implemented at all, either in the C library itself or in the
 899 TRANS operating system.  When you get this error, you can be sure that this
 900 TRANS particular function will always fail with @code{ENOSYS} unless you
 901 TRANS install a new version of the C library or the operating system. */
 902     [ERR_REMAP (ENOSYS)] = N_("Function not implemented"),
 903 # if ENOSYS > ERR_MAX
 904 # undef ERR_MAX
 905 # define ERR_MAX ENOSYS
 906 # endif
 907 #endif
 908 #if defined (ENOTSUP) && ENOTSUP != EOPNOTSUPP
 909 /*
 910 TRANS Not supported.  A function returns this error when certain parameter
 911 TRANS values are valid, but the functionality they request is not available.
 912 TRANS This can mean that the function does not implement a particular command
 913 TRANS or option value or flag bit at all.  For functions that operate on some
 914 TRANS object given in a parameter, such as a file descriptor or a port, it
 915 TRANS might instead mean that only @emph{that specific object} (file
 916 TRANS descriptor, port, etc.) is unable to support the other parameters given;
 917 TRANS different file descriptors might support different ranges of parameter
 918 TRANS values.
 919 TRANS
 920 TRANS If the entire function is not available at all in the implementation,
 921 TRANS it returns @code{ENOSYS} instead. */
 922     [ERR_REMAP (ENOTSUP)] = N_("Not supported"),
 923 # if ENOTSUP > ERR_MAX
 924 # undef ERR_MAX
 925 # define ERR_MAX ENOTSUP
 926 # endif
 927 #endif
 928 #ifdef EILSEQ
 929 /*
 930 TRANS While decoding a multibyte character the function came along an invalid
 931 TRANS or an incomplete sequence of bytes or the given wide character is invalid. */
 932     [ERR_REMAP (EILSEQ)] = N_("Invalid or incomplete multibyte or wide character"),
 933 # if EILSEQ > ERR_MAX
 934 # undef ERR_MAX
 935 # define ERR_MAX EILSEQ
 936 # endif
 937 #endif
 938 #ifdef EBACKGROUND
 939 /*
 940 TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return
 941 TRANS this error for certain operations when the caller is not in the
 942 TRANS foreground process group of the terminal.  Users do not usually see this
 943 TRANS error because functions such as @code{read} and @code{write} translate
 944 TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal.  @xref{Job Control},
 945 TRANS for information on process groups and these signals. */
 946     [ERR_REMAP (EBACKGROUND)] = N_("Inappropriate operation for background process"),
 947 # if EBACKGROUND > ERR_MAX
 948 # undef ERR_MAX
 949 # define ERR_MAX EBACKGROUND
 950 # endif
 951 #endif
 952 #ifdef EDIED
 953 /*
 954 TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is
 955 TRANS translated by a program and the translator program dies while starting
 956 TRANS up, before it has connected to the file. */
 957     [ERR_REMAP (EDIED)] = N_("Translator died"),
 958 # if EDIED > ERR_MAX
 959 # undef ERR_MAX
 960 # define ERR_MAX EDIED
 961 # endif
 962 #endif
 963 #ifdef ED
 964 /*
 965 TRANS The experienced user will know what is wrong.
 966 TRANS @c This error code is a joke.  Its perror text is part of the joke.
 967 TRANS @c Don't change it. */
 968     [ERR_REMAP (ED)] = N_("?"),
 969 # if ED > ERR_MAX
 970 # undef ERR_MAX
 971 # define ERR_MAX ED
 972 # endif
 973 #endif
 974 #ifdef EGREGIOUS
 975 /*
 976 TRANS You did @strong{what}? */
 977     [ERR_REMAP (EGREGIOUS)] = N_("You really blew it this time"),
 978 # if EGREGIOUS > ERR_MAX
 979 # undef ERR_MAX
 980 # define ERR_MAX EGREGIOUS
 981 # endif
 982 #endif
 983 #ifdef EIEIO
 984 /*
 985 TRANS Go home and have a glass of warm, dairy-fresh milk. */
 986     [ERR_REMAP (EIEIO)] = N_("Computer bought the farm"),
 987 # if EIEIO > ERR_MAX
 988 # undef ERR_MAX
 989 # define ERR_MAX EIEIO
 990 # endif
 991 #endif
 992 #ifdef EGRATUITOUS
 993 /*
 994 TRANS This error code has no purpose. */
 995     [ERR_REMAP (EGRATUITOUS)] = N_("Gratuitous error"),
 996 # if EGRATUITOUS > ERR_MAX
 997 # undef ERR_MAX
 998 # define ERR_MAX EGRATUITOUS
 999 # endif
1000 #endif
1001 #ifdef EBADMSG
1002 /* */
1003     [ERR_REMAP (EBADMSG)] = N_("Bad message"),
1004 # if EBADMSG > ERR_MAX
1005 # undef ERR_MAX
1006 # define ERR_MAX EBADMSG
1007 # endif
1008 #endif
1009 #ifdef EIDRM
1010 /* */
1011     [ERR_REMAP (EIDRM)] = N_("Identifier removed"),
1012 # if EIDRM > ERR_MAX
1013 # undef ERR_MAX
1014 # define ERR_MAX EIDRM
1015 # endif
1016 #endif
1017 #ifdef EMULTIHOP
1018 /* */
1019     [ERR_REMAP (EMULTIHOP)] = N_("Multihop attempted"),
1020 # if EMULTIHOP > ERR_MAX
1021 # undef ERR_MAX
1022 # define ERR_MAX EMULTIHOP
1023 # endif
1024 #endif
1025 #ifdef ENODATA
1026 /* */
1027     [ERR_REMAP (ENODATA)] = N_("No data available"),
1028 # if ENODATA > ERR_MAX
1029 # undef ERR_MAX
1030 # define ERR_MAX ENODATA
1031 # endif
1032 #endif
1033 #ifdef ENOLINK
1034 /* */
1035     [ERR_REMAP (ENOLINK)] = N_("Link has been severed"),
1036 # if ENOLINK > ERR_MAX
1037 # undef ERR_MAX
1038 # define ERR_MAX ENOLINK
1039 # endif
1040 #endif
1041 #ifdef ENOMSG
1042 /* */
1043     [ERR_REMAP (ENOMSG)] = N_("No message of desired type"),
1044 # if ENOMSG > ERR_MAX
1045 # undef ERR_MAX
1046 # define ERR_MAX ENOMSG
1047 # endif
1048 #endif
1049 #ifdef ENOSR
1050 /* */
1051     [ERR_REMAP (ENOSR)] = N_("Out of streams resources"),
1052 # if ENOSR > ERR_MAX
1053 # undef ERR_MAX
1054 # define ERR_MAX ENOSR
1055 # endif
1056 #endif
1057 #ifdef ENOSTR
1058 /* */
1059     [ERR_REMAP (ENOSTR)] = N_("Device not a stream"),
1060 # if ENOSTR > ERR_MAX
1061 # undef ERR_MAX
1062 # define ERR_MAX ENOSTR
1063 # endif
1064 #endif
1065 #ifdef EOVERFLOW
1066 /* */
1067     [ERR_REMAP (EOVERFLOW)] = N_("Value too large for defined data type"),
1068 # if EOVERFLOW > ERR_MAX
1069 # undef ERR_MAX
1070 # define ERR_MAX EOVERFLOW
1071 # endif
1072 #endif
1073 #ifdef EPROTO
1074 /* */
1075     [ERR_REMAP (EPROTO)] = N_("Protocol error"),
1076 # if EPROTO > ERR_MAX
1077 # undef ERR_MAX
1078 # define ERR_MAX EPROTO
1079 # endif
1080 #endif
1081 #ifdef ETIME
1082 /* */
1083     [ERR_REMAP (ETIME)] = N_("Timer expired"),
1084 # if ETIME > ERR_MAX
1085 # undef ERR_MAX
1086 # define ERR_MAX ETIME
1087 # endif
1088 #endif
1089 #ifdef ECANCELED
1090 /*
1091 TRANS Operation canceled; an asynchronous operation was canceled before it
1092 TRANS completed.  @xref{Asynchronous I/O}.  When you call @code{aio_cancel},
1093 TRANS the normal result is for the operations affected to complete with this
1094 TRANS error; @pxref{Cancel AIO Operations}. */
1095     [ERR_REMAP (ECANCELED)] = N_("Operation canceled"),
1096 # if ECANCELED > ERR_MAX
1097 # undef ERR_MAX
1098 # define ERR_MAX ECANCELED
1099 # endif
1100 #endif
1101 #ifdef ERESTART
1102 /* */
1103     [ERR_REMAP (ERESTART)] = N_("Interrupted system call should be restarted"),
1104 # if ERESTART > ERR_MAX
1105 # undef ERR_MAX
1106 # define ERR_MAX ERESTART
1107 # endif
1108 #endif
1109 #ifdef ECHRNG
1110 /* */
1111     [ERR_REMAP (ECHRNG)] = N_("Channel number out of range"),
1112 # if ECHRNG > ERR_MAX
1113 # undef ERR_MAX
1114 # define ERR_MAX ECHRNG
1115 # endif
1116 #endif
1117 #ifdef EL2NSYNC
1118 /* */
1119     [ERR_REMAP (EL2NSYNC)] = N_("Level 2 not synchronized"),
1120 # if EL2NSYNC > ERR_MAX
1121 # undef ERR_MAX
1122 # define ERR_MAX EL2NSYNC
1123 # endif
1124 #endif
1125 #ifdef EL3HLT
1126 /* */
1127     [ERR_REMAP (EL3HLT)] = N_("Level 3 halted"),
1128 # if EL3HLT > ERR_MAX
1129 # undef ERR_MAX
1130 # define ERR_MAX EL3HLT
1131 # endif
1132 #endif
1133 #ifdef EL3RST
1134 /* */
1135     [ERR_REMAP (EL3RST)] = N_("Level 3 reset"),
1136 # if EL3RST > ERR_MAX
1137 # undef ERR_MAX
1138 # define ERR_MAX EL3RST
1139 # endif
1140 #endif
1141 #ifdef ELNRNG
1142 /* */
1143     [ERR_REMAP (ELNRNG)] = N_("Link number out of range"),
1144 # if ELNRNG > ERR_MAX
1145 # undef ERR_MAX
1146 # define ERR_MAX ELNRNG
1147 # endif
1148 #endif
1149 #ifdef EUNATCH
1150 /* */
1151     [ERR_REMAP (EUNATCH)] = N_("Protocol driver not attached"),
1152 # if EUNATCH > ERR_MAX
1153 # undef ERR_MAX
1154 # define ERR_MAX EUNATCH
1155 # endif
1156 #endif
1157 #ifdef ENOCSI
1158 /* */
1159     [ERR_REMAP (ENOCSI)] = N_("No CSI structure available"),
1160 # if ENOCSI > ERR_MAX
1161 # undef ERR_MAX
1162 # define ERR_MAX ENOCSI
1163 # endif
1164 #endif
1165 #ifdef EL2HLT
1166 /* */
1167     [ERR_REMAP (EL2HLT)] = N_("Level 2 halted"),
1168 # if EL2HLT > ERR_MAX
1169 # undef ERR_MAX
1170 # define ERR_MAX EL2HLT
1171 # endif
1172 #endif
1173 #ifdef EBADE
1174 /* */
1175     [ERR_REMAP (EBADE)] = N_("Invalid exchange"),
1176 # if EBADE > ERR_MAX
1177 # undef ERR_MAX
1178 # define ERR_MAX EBADE
1179 # endif
1180 #endif
1181 #ifdef EBADR
1182 /* */
1183     [ERR_REMAP (EBADR)] = N_("Invalid request descriptor"),
1184 # if EBADR > ERR_MAX
1185 # undef ERR_MAX
1186 # define ERR_MAX EBADR
1187 # endif
1188 #endif
1189 #ifdef EXFULL
1190 /* */
1191     [ERR_REMAP (EXFULL)] = N_("Exchange full"),
1192 # if EXFULL > ERR_MAX
1193 # undef ERR_MAX
1194 # define ERR_MAX EXFULL
1195 # endif
1196 #endif
1197 #ifdef ENOANO
1198 /* */
1199     [ERR_REMAP (ENOANO)] = N_("No anode"),
1200 # if ENOANO > ERR_MAX
1201 # undef ERR_MAX
1202 # define ERR_MAX ENOANO
1203 # endif
1204 #endif
1205 #ifdef EBADRQC
1206 /* */
1207     [ERR_REMAP (EBADRQC)] = N_("Invalid request code"),
1208 # if EBADRQC > ERR_MAX
1209 # undef ERR_MAX
1210 # define ERR_MAX EBADRQC
1211 # endif
1212 #endif
1213 #ifdef EBADSLT
1214 /* */
1215     [ERR_REMAP (EBADSLT)] = N_("Invalid slot"),
1216 # if EBADSLT > ERR_MAX
1217 # undef ERR_MAX
1218 # define ERR_MAX EBADSLT
1219 # endif
1220 #endif
1221 #if defined (EDEADLOCK) && EDEADLOCK != EDEADLK
1222 /* */
1223     [ERR_REMAP (EDEADLOCK)] = N_("File locking deadlock error"),
1224 # if EDEADLOCK > ERR_MAX
1225 # undef ERR_MAX
1226 # define ERR_MAX EDEADLOCK
1227 # endif
1228 #endif
1229 #ifdef EBFONT
1230 /* */
1231     [ERR_REMAP (EBFONT)] = N_("Bad font file format"),
1232 # if EBFONT > ERR_MAX
1233 # undef ERR_MAX
1234 # define ERR_MAX EBFONT
1235 # endif
1236 #endif
1237 #ifdef ENONET
1238 /* */
1239     [ERR_REMAP (ENONET)] = N_("Machine is not on the network"),
1240 # if ENONET > ERR_MAX
1241 # undef ERR_MAX
1242 # define ERR_MAX ENONET
1243 # endif
1244 #endif
1245 #ifdef ENOPKG
1246 /* */
1247     [ERR_REMAP (ENOPKG)] = N_("Package not installed"),
1248 # if ENOPKG > ERR_MAX
1249 # undef ERR_MAX
1250 # define ERR_MAX ENOPKG
1251 # endif
1252 #endif
1253 #ifdef EADV
1254 /* */
1255     [ERR_REMAP (EADV)] = N_("Advertise error"),
1256 # if EADV > ERR_MAX
1257 # undef ERR_MAX
1258 # define ERR_MAX EADV
1259 # endif
1260 #endif
1261 #ifdef ESRMNT
1262 /* */
1263     [ERR_REMAP (ESRMNT)] = N_("Srmount error"),
1264 # if ESRMNT > ERR_MAX
1265 # undef ERR_MAX
1266 # define ERR_MAX ESRMNT
1267 # endif
1268 #endif
1269 #ifdef ECOMM
1270 /* */
1271     [ERR_REMAP (ECOMM)] = N_("Communication error on send"),
1272 # if ECOMM > ERR_MAX
1273 # undef ERR_MAX
1274 # define ERR_MAX ECOMM
1275 # endif
1276 #endif
1277 #ifdef EDOTDOT
1278 /* */
1279     [ERR_REMAP (EDOTDOT)] = N_("RFS specific error"),
1280 # if EDOTDOT > ERR_MAX
1281 # undef ERR_MAX
1282 # define ERR_MAX EDOTDOT
1283 # endif
1284 #endif
1285 #ifdef ENOTUNIQ
1286 /* */
1287     [ERR_REMAP (ENOTUNIQ)] = N_("Name not unique on network"),
1288 # if ENOTUNIQ > ERR_MAX
1289 # undef ERR_MAX
1290 # define ERR_MAX ENOTUNIQ
1291 # endif
1292 #endif
1293 #ifdef EBADFD
1294 /* */
1295     [ERR_REMAP (EBADFD)] = N_("File descriptor in bad state"),
1296 # if EBADFD > ERR_MAX
1297 # undef ERR_MAX
1298 # define ERR_MAX EBADFD
1299 # endif
1300 #endif
1301 #ifdef EREMCHG
1302 /* */
1303     [ERR_REMAP (EREMCHG)] = N_("Remote address changed"),
1304 # if EREMCHG > ERR_MAX
1305 # undef ERR_MAX
1306 # define ERR_MAX EREMCHG
1307 # endif
1308 #endif
1309 #ifdef ELIBACC
1310 /* */
1311     [ERR_REMAP (ELIBACC)] = N_("Can not access a needed shared library"),
1312 # if ELIBACC > ERR_MAX
1313 # undef ERR_MAX
1314 # define ERR_MAX ELIBACC
1315 # endif
1316 #endif
1317 #ifdef ELIBBAD
1318 /* */
1319     [ERR_REMAP (ELIBBAD)] = N_("Accessing a corrupted shared library"),
1320 # if ELIBBAD > ERR_MAX
1321 # undef ERR_MAX
1322 # define ERR_MAX ELIBBAD
1323 # endif
1324 #endif
1325 #ifdef ELIBSCN
1326 /* */
1327     [ERR_REMAP (ELIBSCN)] = N_(".lib section in a.out corrupted"),
1328 # if ELIBSCN > ERR_MAX
1329 # undef ERR_MAX
1330 # define ERR_MAX ELIBSCN
1331 # endif
1332 #endif
1333 #ifdef ELIBMAX
1334 /* */
1335     [ERR_REMAP (ELIBMAX)] = N_("Attempting to link in too many shared libraries"),
1336 # if ELIBMAX > ERR_MAX
1337 # undef ERR_MAX
1338 # define ERR_MAX ELIBMAX
1339 # endif
1340 #endif
1341 #ifdef ELIBEXEC
1342 /* */
1343     [ERR_REMAP (ELIBEXEC)] = N_("Cannot exec a shared library directly"),
1344 # if ELIBEXEC > ERR_MAX
1345 # undef ERR_MAX
1346 # define ERR_MAX ELIBEXEC
1347 # endif
1348 #endif
1349 #ifdef ESTRPIPE
1350 /* */
1351     [ERR_REMAP (ESTRPIPE)] = N_("Streams pipe error"),
1352 # if ESTRPIPE > ERR_MAX
1353 # undef ERR_MAX
1354 # define ERR_MAX ESTRPIPE
1355 # endif
1356 #endif
1357 #ifdef EUCLEAN
1358 /* */
1359     [ERR_REMAP (EUCLEAN)] = N_("Structure needs cleaning"),
1360 # if EUCLEAN > ERR_MAX
1361 # undef ERR_MAX
1362 # define ERR_MAX EUCLEAN
1363 # endif
1364 #endif
1365 #ifdef ENOTNAM
1366 /* */
1367     [ERR_REMAP (ENOTNAM)] = N_("Not a XENIX named type file"),
1368 # if ENOTNAM > ERR_MAX
1369 # undef ERR_MAX
1370 # define ERR_MAX ENOTNAM
1371 # endif
1372 #endif
1373 #ifdef ENAVAIL
1374 /* */
1375     [ERR_REMAP (ENAVAIL)] = N_("No XENIX semaphores available"),
1376 # if ENAVAIL > ERR_MAX
1377 # undef ERR_MAX
1378 # define ERR_MAX ENAVAIL
1379 # endif
1380 #endif
1381 #ifdef EISNAM
1382 /* */
1383     [ERR_REMAP (EISNAM)] = N_("Is a named type file"),
1384 # if EISNAM > ERR_MAX
1385 # undef ERR_MAX
1386 # define ERR_MAX EISNAM
1387 # endif
1388 #endif
1389 #ifdef EREMOTEIO
1390 /* */
1391     [ERR_REMAP (EREMOTEIO)] = N_("Remote I/O error"),
1392 # if EREMOTEIO > ERR_MAX
1393 # undef ERR_MAX
1394 # define ERR_MAX EREMOTEIO
1395 # endif
1396 #endif
1397 #ifdef ENOMEDIUM
1398 /* */
1399     [ERR_REMAP (ENOMEDIUM)] = N_("No medium found"),
1400 # if ENOMEDIUM > ERR_MAX
1401 # undef ERR_MAX
1402 # define ERR_MAX ENOMEDIUM
1403 # endif
1404 #endif
1405 #ifdef EMEDIUMTYPE
1406 /* */
1407     [ERR_REMAP (EMEDIUMTYPE)] = N_("Wrong medium type"),
1408 # if EMEDIUMTYPE > ERR_MAX
1409 # undef ERR_MAX
1410 # define ERR_MAX EMEDIUMTYPE
1411 # endif
1412 #endif
1413 #ifdef ENOKEY
1414 /* */
1415     [ERR_REMAP (ENOKEY)] = N_("Required key not available"),
1416 # if ENOKEY > ERR_MAX
1417 # undef ERR_MAX
1418 # define ERR_MAX ENOKEY
1419 # endif
1420 #endif
1421 #ifdef EKEYEXPIRED
1422 /* */
1423     [ERR_REMAP (EKEYEXPIRED)] = N_("Key has expired"),
1424 # if EKEYEXPIRED > ERR_MAX
1425 # undef ERR_MAX
1426 # define ERR_MAX EKEYEXPIRED
1427 # endif
1428 #endif
1429 #ifdef EKEYREVOKED
1430 /* */
1431     [ERR_REMAP (EKEYREVOKED)] = N_("Key has been revoked"),
1432 # if EKEYREVOKED > ERR_MAX
1433 # undef ERR_MAX
1434 # define ERR_MAX EKEYREVOKED
1435 # endif
1436 #endif
1437 #ifdef EKEYREJECTED
1438 /* */
1439     [ERR_REMAP (EKEYREJECTED)] = N_("Key was rejected by service"),
1440 # if EKEYREJECTED > ERR_MAX
1441 # undef ERR_MAX
1442 # define ERR_MAX EKEYREJECTED
1443 # endif
1444 #endif
1445 #ifdef EOWNERDEAD
1446 /* */
1447     [ERR_REMAP (EOWNERDEAD)] = N_("Owner died"),
1448 # if EOWNERDEAD > ERR_MAX
1449 # undef ERR_MAX
1450 # define ERR_MAX EOWNERDEAD
1451 # endif
1452 #endif
1453 #ifdef ENOTRECOVERABLE
1454 /* */
1455     [ERR_REMAP (ENOTRECOVERABLE)] = N_("State not recoverable"),
1456 # if ENOTRECOVERABLE > ERR_MAX
1457 # undef ERR_MAX
1458 # define ERR_MAX ENOTRECOVERABLE
1459 # endif
1460 #endif
1461 #ifdef ERFKILL
1462 /* */
1463     [ERR_REMAP (ERFKILL)] = N_("Operation not possible due to RF-kill"),
1464 # if ERFKILL > ERR_MAX
1465 # undef ERR_MAX
1466 # define ERR_MAX ERFKILL
1467 # endif
1468 #endif
1469 #ifdef EHWPOISON
1470 /* */
1471     [ERR_REMAP (EHWPOISON)] = N_("Memory page has hardware error"),
1472 # if EHWPOISON > ERR_MAX
1473 # undef ERR_MAX
1474 # define ERR_MAX EHWPOISON
1475 # endif
1476 #endif
1477   };
1478
1479 #define NERR \
1480   (sizeof _sys_errlist_internal / sizeof _sys_errlist_internal [0])
1481 const int _sys_nerr_internal = NERR;
1482
1483 #if IS_IN (libc) && !defined ERRLIST_NO_COMPAT
1484 # include <errlist-compat.c>
1485 #endif
1486
1487 #ifdef EMIT_ERR_MAX
1488 void dummy (void)
1489 { asm volatile (" @@@ %0 @@@ " : : "i" (ERR_REMAP (ERR_MAX))); }
1490 #endif