sysdeps/gnu/errlist.c

   1 /* This file is generated from errno.texi by errlist.awk.  */
   2
   3 #include <errno.h>
   4
   5 const char *const _sys_errlist[] =
   6   {
   7     [0] = N_("Success"),
   8 #ifdef EPERM
   9 /*
  10 TRANS Operation not permitted; only the owner of the file (or other resource)
  11 TRANS or processes with special privileges can perform the operation. */
  12     [EPERM] = N_("Operation not permitted"),
  13 #endif
  14 #ifdef ENOENT
  15 /*
  16 TRANS No such file or directory.  This is a ``file doesn't exist'' error
  17 TRANS for ordinary files that are referenced in contexts where they are
  18 TRANS expected to already exist. */
  19     [ENOENT] = N_("No such file or directory"),
  20 #endif
  21 #ifdef ESRCH
  22 /*
  23 TRANS No process matches the specified process ID. */
  24     [ESRCH] = N_("No such process"),
  25 #endif
  26 #ifdef EINTR
  27 /*
  28 TRANS Interrupted function call; an asynchronous signal occurred and prevented
  29 TRANS completion of the call.  When this happens, you should try the call
  30 TRANS again.
  31 TRANS
  32 TRANS You can choose to have functions resume after a signal that is handled,
  33 TRANS rather than failing with @code{EINTR}; see @ref{Interrupted
  34 TRANS Primitives}. */
  35     [EINTR] = N_("Interrupted system call"),
  36 #endif
  37 #ifdef EIO
  38 /*
  39 TRANS Input/output error; usually used for physical read or write errors. */
  40     [EIO] = N_("Input/output error"),
  41 #endif
  42 #ifdef ENXIO
  43 /*
  44 TRANS No such device or address.  The system tried to use the device
  45 TRANS represented by a file you specified, and it couldn't find the device.
  46 TRANS This can mean that the device file was installed incorrectly, or that
  47 TRANS the physical device is missing or not correctly attached to the
  48 TRANS computer. */
  49     [ENXIO] = N_("Device not configured"),
  50 #endif
  51 #ifdef E2BIG
  52 /*
  53 TRANS Argument list too long; used when the arguments passed to a new program
  54 TRANS being executed with one of the @code{exec} functions (@pxref{Executing a
  55 TRANS File}) occupy too much memory space.  This condition never arises in the
  56 TRANS GNU system. */
  57     [E2BIG] = N_("Argument list too long"),
  58 #endif
  59 #ifdef ENOEXEC
  60 /*
  61 TRANS Invalid executable file format.  This condition is detected by the
  62 TRANS @code{exec} functions; see @ref{Executing a File}. */
  63     [ENOEXEC] = N_("Exec format error"),
  64 #endif
  65 #ifdef EBADF
  66 /*
  67 TRANS Bad file descriptor; for example, I/O on a descriptor that has been
  68 TRANS closed or reading from a descriptor open only for writing (or vice
  69 TRANS versa). */
  70     [EBADF] = N_("Bad file descriptor"),
  71 #endif
  72 #ifdef ECHILD
  73 /*
  74 TRANS There are no child processes.  This error happens on operations that are
  75 TRANS supposed to manipulate child processes, when there aren't any processes
  76 TRANS to manipulate. */
  77     [ECHILD] = N_("No child processes"),
  78 #endif
  79 #ifdef EDEADLK
  80 /*
  81 TRANS Deadlock avoided; allocating a system resource would have resulted in a
  82 TRANS deadlock situation.  The system does not guarantee that it will notice
  83 TRANS all such situations.  This error means you got lucky and the system
  84 TRANS noticed; it might just hang.  @xref{File Locks}, for an example. */
  85     [EDEADLK] = N_("Resource deadlock avoided"),
  86 #endif
  87 #ifdef ENOMEM
  88 /*
  89 TRANS No memory available.  The system cannot allocate more virtual memory
  90 TRANS because its capacity is full. */
  91     [ENOMEM] = N_("Cannot allocate memory"),
  92 #endif
  93 #ifdef EACCES
  94 /*
  95 TRANS Permission denied; the file permissions do not allow the attempted operation. */
  96     [EACCES] = N_("Permission denied"),
  97 #endif
  98 #ifdef EFAULT
  99 /*
 100 TRANS Bad address; an invalid pointer was detected.
 101 TRANS In the GNU system, this error never happens; you get a signal instead. */
 102     [EFAULT] = N_("Bad address"),
 103 #endif
 104 #ifdef ENOTBLK
 105 /*
 106 TRANS A file that isn't a block special file was given in a situation that
 107 TRANS requires one.  For example, trying to mount an ordinary file as a file
 108 TRANS system in Unix gives this error. */
 109     [ENOTBLK] = N_("Block device required"),
 110 #endif
 111 #ifdef EBUSY
 112 /*
 113 TRANS Resource busy; a system resource that can't be shared is already in use.
 114 TRANS For example, if you try to delete a file that is the root of a currently
 115 TRANS mounted filesystem, you get this error. */
 116     [EBUSY] = N_("Device or resource busy"),
 117 #endif
 118 #ifdef EEXIST
 119 /*
 120 TRANS File exists; an existing file was specified in a context where it only
 121 TRANS makes sense to specify a new file. */
 122     [EEXIST] = N_("File exists"),
 123 #endif
 124 #ifdef EXDEV
 125 /*
 126 TRANS An attempt to make an improper link across file systems was detected.
 127 TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but
 128 TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). */
 129     [EXDEV] = N_("Invalid cross-device link"),
 130 #endif
 131 #ifdef ENODEV
 132 /*
 133 TRANS The wrong type of device was given to a function that expects a
 134 TRANS particular sort of device. */
 135     [ENODEV] = N_("Operation not supported by device"),
 136 #endif
 137 #ifdef ENOTDIR
 138 /*
 139 TRANS A file that isn't a directory was specified when a directory is required. */
 140     [ENOTDIR] = N_("Not a directory"),
 141 #endif
 142 #ifdef EISDIR
 143 /*
 144 TRANS File is a directory; you cannot open a directory for writing,
 145 TRANS or create or remove hard links to it. */
 146     [EISDIR] = N_("Is a directory"),
 147 #endif
 148 #ifdef EINVAL
 149 /*
 150 TRANS Invalid argument.  This is used to indicate various kinds of problems
 151 TRANS with passing the wrong argument to a library function. */
 152     [EINVAL] = N_("Invalid argument"),
 153 #endif
 154 #ifdef EMFILE
 155 /*
 156 TRANS The current process has too many files open and can't open any more.
 157 TRANS Duplicate descriptors do count toward this limit.
 158 TRANS
 159 TRANS In BSD and GNU, the number of open files is controlled by a resource
 160 TRANS limit that can usually be increased.  If you get this error, you might
 161 TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited;
 162 TRANS @pxref{Limits on Resources}. */
 163     [EMFILE] = N_("Too many open files"),
 164 #endif
 165 #ifdef ENFILE
 166 /*
 167 TRANS There are too many distinct file openings in the entire system.  Note
 168 TRANS that any number of linked channels count as just one file opening; see
 169 TRANS @ref{Linked Channels}.  This error never occurs in the GNU system. */
 170     [ENFILE] = N_("Too many open files in system"),
 171 #endif
 172 #ifdef ENOTTY
 173 /*
 174 TRANS Inappropriate I/O control operation, such as trying to set terminal
 175 TRANS modes on an ordinary file. */
 176     [ENOTTY] = N_("Inappropriate ioctl for device"),
 177 #endif
 178 #ifdef ETXTBSY
 179 /*
 180 TRANS An attempt to execute a file that is currently open for writing, or
 181 TRANS write to a file that is currently being executed.  Often using a
 182 TRANS debugger to run a program is considered having it open for writing and
 183 TRANS will cause this error.  (The name stands for ``text file busy''.)  This
 184 TRANS is not an error in the GNU system; the text is copied as necessary. */
 185     [ETXTBSY] = N_("Text file busy"),
 186 #endif
 187 #ifdef EFBIG
 188 /*
 189 TRANS File too big; the size of a file would be larger than allowed by the system. */
 190     [EFBIG] = N_("File too large"),
 191 #endif
 192 #ifdef ENOSPC
 193 /*
 194 TRANS No space left on device; write operation on a file failed because the
 195 TRANS disk is full. */
 196     [ENOSPC] = N_("No space left on device"),
 197 #endif
 198 #ifdef ESPIPE
 199 /*
 200 TRANS Invalid seek operation (such as on a pipe). */
 201     [ESPIPE] = N_("Illegal seek"),
 202 #endif
 203 #ifdef EROFS
 204 /*
 205 TRANS An attempt was made to modify something on a read-only file system. */
 206     [EROFS] = N_("Read-only file system"),
 207 #endif
 208 #ifdef EMLINK
 209 /*
 210 TRANS Too many links; the link count of a single file would become too large.
 211 TRANS @code{rename} can cause this error if the file being renamed already has
 212 TRANS as many links as it can take (@pxref{Renaming Files}). */
 213     [EMLINK] = N_("Too many links"),
 214 #endif
 215 #ifdef EPIPE
 216 /*
 217 TRANS Broken pipe; there is no process reading from the other end of a pipe.
 218 TRANS Every library function that returns this error code also generates a
 219 TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled
 220 TRANS or blocked.  Thus, your program will never actually see @code{EPIPE}
 221 TRANS unless it has handled or blocked @code{SIGPIPE}. */
 222     [EPIPE] = N_("Broken pipe"),
 223 #endif
 224 #ifdef EDOM
 225 /*
 226 TRANS Domain error; used by mathematical functions when an argument value does
 227 TRANS not fall into the domain over which the function is defined. */
 228     [EDOM] = N_("Numerical argument out of domain"),
 229 #endif
 230 #ifdef ERANGE
 231 /*
 232 TRANS Range error; used by mathematical functions when the result value is
 233 TRANS not representable because of overflow or underflow. */
 234     [ERANGE] = N_("Numerical result out of range"),
 235 #endif
 236 #ifdef EAGAIN
 237 /*
 238 TRANS Resource temporarily unavailable; the call might work if you try again
 239 TRANS later.  The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN};
 240 TRANS they are always the same in the GNU C library.
 241 TRANS
 242 TRANS This error can happen in a few different situations:
 243 TRANS
 244 TRANS @itemize @bullet
 245 TRANS @item
 246 TRANS An operation that would block was attempted on an object that has
 247 TRANS non-blocking mode selected.  Trying the same operation again will block
 248 TRANS until some external condition makes it possible to read, write, or
 249 TRANS connect (whatever the operation).  You can use @code{select} to find out
 250 TRANS when the operation will be possible; @pxref{Waiting for I/O}.
 251 TRANS
 252 TRANS @strong{Portability Note:} In many older Unix systems, this condition
 253 TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code
 254 TRANS different from @code{EAGAIN}.  To make your program portable, you should
 255 TRANS check for both codes and treat them the same.
 256 TRANS
 257 TRANS @item
 258 TRANS A temporary resource shortage made an operation impossible.  @code{fork}
 259 TRANS can return this error.  It indicates that the shortage is expected to
 260 TRANS pass, so your program can try the call again later and it may succeed.
 261 TRANS It is probably a good idea to delay for a few seconds before trying it
 262 TRANS again, to allow time for other processes to release scarce resources.
 263 TRANS Such shortages are usually fairly serious and affect the whole system,
 264 TRANS so usually an interactive program should report the error to the user
 265 TRANS and return to its command loop.
 266 TRANS @end itemize */
 267     [EAGAIN] = N_("Resource temporarily unavailable"),
 268 #endif
 269 #if defined (EWOULDBLOCK) && EWOULDBLOCK != EAGAIN
 270 /*
 271 TRANS In the GNU C library, this is another name for @code{EAGAIN} (above).
 272 TRANS The values are always the same, on every operating system.
 273 TRANS
 274 TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a
 275 TRANS separate error code. */
 276     [EWOULDBLOCK] = N_("Operation would block"),
 277 #endif
 278 #ifdef EINPROGRESS
 279 /*
 280 TRANS An operation that cannot complete immediately was initiated on an object
 281 TRANS that has non-blocking mode selected.  Some functions that must always
 282 TRANS block (such as @code{connect}; @pxref{Connecting}) never return
 283 TRANS @code{EAGAIN}.  Instead, they return @code{EINPROGRESS} to indicate that
 284 TRANS the operation has begun and will take some time.  Attempts to manipulate
 285 TRANS the object before the call completes return @code{EALREADY}.  You can
 286 TRANS use the @code{select} function to find out when the pending operation
 287 TRANS has completed; @pxref{Waiting for I/O}. */
 288     [EINPROGRESS] = N_("Operation now in progress"),
 289 #endif
 290 #ifdef EALREADY
 291 /*
 292 TRANS An operation is already in progress on an object that has non-blocking
 293 TRANS mode selected. */
 294     [EALREADY] = N_("Operation already in progress"),
 295 #endif
 296 #ifdef ENOTSOCK
 297 /*
 298 TRANS A file that isn't a socket was specified when a socket is required. */
 299     [ENOTSOCK] = N_("Socket operation on non-socket"),
 300 #endif
 301 #ifdef EMSGSIZE
 302 /*
 303 TRANS The size of a message sent on a socket was larger than the supported
 304 TRANS maximum size. */
 305     [EMSGSIZE] = N_("Message too long"),
 306 #endif
 307 #ifdef EPROTOTYPE
 308 /*
 309 TRANS The socket type does not support the requested communications protocol. */
 310     [EPROTOTYPE] = N_("Protocol wrong type for socket"),
 311 #endif
 312 #ifdef ENOPROTOOPT
 313 /*
 314 TRANS You specified a socket option that doesn't make sense for the
 315 TRANS particular protocol being used by the socket.  @xref{Socket Options}. */
 316     [ENOPROTOOPT] = N_("Protocol not available"),
 317 #endif
 318 #ifdef EPROTONOSUPPORT
 319 /*
 320 TRANS The socket domain does not support the requested communications protocol
 321 TRANS (perhaps because the requested protocol is completely invalid.)
 322 TRANS @xref{Creating a Socket}. */
 323     [EPROTONOSUPPORT] = N_("Protocol not supported"),
 324 #endif
 325 #ifdef ESOCKTNOSUPPORT
 326 /*
 327 TRANS The socket type is not supported. */
 328     [ESOCKTNOSUPPORT] = N_("Socket type not supported"),
 329 #endif
 330 #ifdef EOPNOTSUPP
 331 /*
 332 TRANS The operation you requested is not supported.  Some socket functions
 333 TRANS don't make sense for all types of sockets, and others may not be
 334 TRANS implemented for all communications protocols.  In the GNU system, this
 335 TRANS error can happen for many calls when the object does not support the
 336 TRANS particular operation; it is a generic indication that the server knows
 337 TRANS nothing to do for that call. */
 338     [EOPNOTSUPP] = N_("Operation not supported"),
 339 #endif
 340 #ifdef EPFNOSUPPORT
 341 /*
 342 TRANS The socket communications protocol family you requested is not supported. */
 343     [EPFNOSUPPORT] = N_("Protocol family not supported"),
 344 #endif
 345 #ifdef EAFNOSUPPORT
 346 /*
 347 TRANS The address family specified for a socket is not supported; it is
 348 TRANS inconsistent with the protocol being used on the socket.  @xref{Sockets}. */
 349     [EAFNOSUPPORT] = N_("Address family not supported by protocol"),
 350 #endif
 351 #ifdef EADDRINUSE
 352 /*
 353 TRANS The requested socket address is already in use.  @xref{Socket Addresses}. */
 354     [EADDRINUSE] = N_("Address already in use"),
 355 #endif
 356 #ifdef EADDRNOTAVAIL
 357 /*
 358 TRANS The requested socket address is not available; for example, you tried
 359 TRANS to give a socket a name that doesn't match the local host name.
 360 TRANS @xref{Socket Addresses}. */
 361     [EADDRNOTAVAIL] = N_("Cannot assign requested address"),
 362 #endif
 363 #ifdef ENETDOWN
 364 /*
 365 TRANS A socket operation failed because the network was down. */
 366     [ENETDOWN] = N_("Network is down"),
 367 #endif
 368 #ifdef ENETUNREACH
 369 /*
 370 TRANS A socket operation failed because the subnet containing the remote host
 371 TRANS was unreachable. */
 372     [ENETUNREACH] = N_("Network is unreachable"),
 373 #endif
 374 #ifdef ENETRESET
 375 /*
 376 TRANS A network connection was reset because the remote host crashed. */
 377     [ENETRESET] = N_("Network dropped connection on reset"),
 378 #endif
 379 #ifdef ECONNABORTED
 380 /*
 381 TRANS A network connection was aborted locally. */
 382     [ECONNABORTED] = N_("Software caused connection abort"),
 383 #endif
 384 #ifdef ECONNRESET
 385 /*
 386 TRANS A network connection was closed for reasons outside the control of the
 387 TRANS local host, such as by the remote machine rebooting or an unrecoverable
 388 TRANS protocol violation. */
 389     [ECONNRESET] = N_("Connection reset by peer"),
 390 #endif
 391 #ifdef ENOBUFS
 392 /*
 393 TRANS The kernel's buffers for I/O operations are all in use.  In GNU, this
 394 TRANS error is always synonymous with @code{ENOMEM}; you may get one or the
 395 TRANS other from network operations. */
 396     [ENOBUFS] = N_("No buffer space available"),
 397 #endif
 398 #ifdef EISCONN
 399 /*
 400 TRANS You tried to connect a socket that is already connected.
 401 TRANS @xref{Connecting}. */
 402     [EISCONN] = N_("Transport endpoint is already connected"),
 403 #endif
 404 #ifdef ENOTCONN
 405 /*
 406 TRANS The socket is not connected to anything.  You get this error when you
 407 TRANS try to transmit data over a socket, without first specifying a
 408 TRANS destination for the data.  For a connectionless socket (for datagram
 409 TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. */
 410     [ENOTCONN] = N_("Transport endpoint is not connected"),
 411 #endif
 412 #ifdef EDESTADDRREQ
 413 /*
 414 TRANS No default destination address was set for the socket.  You get this
 415 TRANS error when you try to transmit data over a connectionless socket,
 416 TRANS without first specifying a destination for the data with @code{connect}. */
 417     [EDESTADDRREQ] = N_("Destination address required"),
 418 #endif
 419 #ifdef ESHUTDOWN
 420 /*
 421 TRANS The socket has already been shut down. */
 422     [ESHUTDOWN] = N_("Cannot send after transport endpoint shutdown"),
 423 #endif
 424 #ifdef ETOOMANYREFS
 425 /*
 426 TRANS ??? */
 427     [ETOOMANYREFS] = N_("Too many references: cannot splice"),
 428 #endif
 429 #ifdef ETIMEDOUT
 430 /*
 431 TRANS A socket operation with a specified timeout received no response during
 432 TRANS the timeout period. */
 433     [ETIMEDOUT] = N_("Connection timed out"),
 434 #endif
 435 #ifdef ECONNREFUSED
 436 /*
 437 TRANS A remote host refused to allow the network connection (typically because
 438 TRANS it is not running the requested service). */
 439     [ECONNREFUSED] = N_("Connection refused"),
 440 #endif
 441 #ifdef ELOOP
 442 /*
 443 TRANS Too many levels of symbolic links were encountered in looking up a file name.
 444 TRANS This often indicates a cycle of symbolic links. */
 445     [ELOOP] = N_("Too many levels of symbolic links"),
 446 #endif
 447 #ifdef ENAMETOOLONG
 448 /*
 449 TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for
 450 TRANS Files}) or host name too long (in @code{gethostname} or
 451 TRANS @code{sethostname}; @pxref{Host Identification}). */
 452     [ENAMETOOLONG] = N_("File name too long"),
 453 #endif
 454 #ifdef EHOSTDOWN
 455 /*
 456 TRANS The remote host for a requested network connection is down. */
 457     [EHOSTDOWN] = N_("Host is down"),
 458 #endif
 459 #ifdef EHOSTUNREACH
 460 /*
 461 TRANS The remote host for a requested network connection is not reachable. */
 462     [EHOSTUNREACH] = N_("No route to host"),
 463 #endif
 464 #ifdef ENOTEMPTY
 465 /*
 466 TRANS Directory not empty, where an empty directory was expected.  Typically,
 467 TRANS this error occurs when you are trying to delete a directory. */
 468     [ENOTEMPTY] = N_("Directory not empty"),
 469 #endif
 470 #ifdef EPROCLIM
 471 /*
 472 TRANS This means that the per-user limit on new process would be exceeded by
 473 TRANS an attempted @code{fork}.  @xref{Limits on Resources}, for details on
 474 TRANS the @code{RLIMIT_NPROC} limit. */
 475     [EPROCLIM] = N_("Too many processes"),
 476 #endif
 477 #ifdef EUSERS
 478 /*
 479 TRANS The file quota system is confused because there are too many users.
 480 TRANS @c This can probably happen in a GNU system when using NFS. */
 481     [EUSERS] = N_("Too many users"),
 482 #endif
 483 #ifdef EDQUOT
 484 /*
 485 TRANS The user's disk quota was exceeded. */
 486     [EDQUOT] = N_("Disc quota exceeded"),
 487 #endif
 488 #ifdef ESTALE
 489 /*
 490 TRANS Stale NFS file handle.  This indicates an internal confusion in the NFS
 491 TRANS system which is due to file system rearrangements on the server host.
 492 TRANS Repairing this condition usually requires unmounting and remounting
 493 TRANS the NFS file system on the local host. */
 494     [ESTALE] = N_("Stale NFS file handle"),
 495 #endif
 496 #ifdef EREMOTE
 497 /*
 498 TRANS An attempt was made to NFS-mount a remote file system with a file name that
 499 TRANS already specifies an NFS-mounted file.
 500 TRANS (This is an error on some operating systems, but we expect it to work
 501 TRANS properly on the GNU system, making this error code impossible.) */
 502     [EREMOTE] = N_("Object is remote"),
 503 #endif
 504 #ifdef EBADRPC
 505 /*
 506 TRANS ??? */
 507     [EBADRPC] = N_("RPC struct is bad"),
 508 #endif
 509 #ifdef ERPCMISMATCH
 510 /*
 511 TRANS ??? */
 512     [ERPCMISMATCH] = N_("RPC version wrong"),
 513 #endif
 514 #ifdef EPROGUNAVAIL
 515 /*
 516 TRANS ??? */
 517     [EPROGUNAVAIL] = N_("RPC program not available"),
 518 #endif
 519 #ifdef EPROGMISMATCH
 520 /*
 521 TRANS ??? */
 522     [EPROGMISMATCH] = N_("RPC program version wrong"),
 523 #endif
 524 #ifdef EPROCUNAVAIL
 525 /*
 526 TRANS ??? */
 527     [EPROCUNAVAIL] = N_("RPC bad procedure for program"),
 528 #endif
 529 #ifdef ENOLCK
 530 /*
 531 TRANS No locks available.  This is used by the file locking facilities; see
 532 TRANS @ref{File Locks}.  This error is never generated by the GNU system, but
 533 TRANS it can result from an operation to an NFS server running another
 534 TRANS operating system. */
 535     [ENOLCK] = N_("No locks available"),
 536 #endif
 537 #ifdef EFTYPE
 538 /*
 539 TRANS Inappropriate file type or format.  The file was the wrong type for the
 540 TRANS operation, or a data file had the wrong format.
 541 TRANS
 542 TRANS On some systems @code{chmod} returns this error if you try to set the
 543 TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. */
 544     [EFTYPE] = N_("Inappropriate file type or format"),
 545 #endif
 546 #ifdef EAUTH
 547 /*
 548 TRANS ??? */
 549     [EAUTH] = N_("Authentication error"),
 550 #endif
 551 #ifdef ENEEDAUTH
 552 /*
 553 TRANS ??? */
 554     [ENEEDAUTH] = N_("Need authenticator"),
 555 #endif
 556 #ifdef ENOSYS
 557 /*
 558 TRANS Function not implemented.  Some functions have commands or options defined
 559 TRANS that might not be supported in all implementations, and this is the kind
 560 TRANS of error you get if you request them and they are not supported. */
 561     [ENOSYS] = N_("Function not implemented"),
 562 #endif
 563 #ifdef EILSEQ
 564 /*
 565 TRANS While decoding a multibyte character the function came along an invalid
 566 TRANS or an incomplete sequence of bytes or the given wide character is invalid. */
 567     [EILSEQ] = N_("Invalid or incomplete multibyte or wide character"),
 568 #endif
 569 #ifdef EBACKGROUND
 570 /*
 571 TRANS In the GNU system, servers supporting the @code{term} protocol return
 572 TRANS this error for certain operations when the caller is not in the
 573 TRANS foreground process group of the terminal.  Users do not usually see this
 574 TRANS error because functions such as @code{read} and @code{write} translate
 575 TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal.  @xref{Job Control},
 576 TRANS for information on process groups and these signals. */
 577     [EBACKGROUND] = N_("Inappropriate operation for background process"),
 578 #endif
 579 #ifdef EDIED
 580 /*
 581 TRANS In the GNU system, opening a file returns this error when the file is
 582 TRANS translated by a program and the translator program dies while starting
 583 TRANS up, before it has connected to the file. */
 584     [EDIED] = N_("Translator died"),
 585 #endif
 586 #ifdef ED
 587 /*
 588 TRANS The experienced user will know what is wrong.
 589 TRANS @c This error code is a joke.  Its perror text is part of the joke.
 590 TRANS @c Don't change it. */
 591     [ED] = N_("?"),
 592 #endif
 593 #ifdef EGREGIOUS
 594 /*
 595 TRANS You did @strong{what}? */
 596     [EGREGIOUS] = N_("You really blew it this time"),
 597 #endif
 598 #ifdef EIEIO
 599 /*
 600 TRANS Go home and have a glass of warm, dairy-fresh milk. */
 601     [EIEIO] = N_("Computer bought the farm"),
 602 #endif
 603 #ifdef EGRATUITOUS
 604 /*
 605 TRANS This error code has no purpose. */
 606     [EGRATUITOUS] = N_("Gratuitous error"),
 607 #endif
 608 #ifdef EBADMSG
 609 /* */
 610     [EBADMSG] = N_("Bad message"),
 611 #endif
 612 #ifdef EIDRM
 613 /* */
 614     [EIDRM] = N_("Identifier removed"),
 615 #endif
 616 #ifdef EMULTIHOP
 617 /* */
 618     [EMULTIHOP] = N_("Multihop attempted"),
 619 #endif
 620 #ifdef ENODATA
 621 /* */
 622     [ENODATA] = N_("No data available"),
 623 #endif
 624 #ifdef ENOLINK
 625 /* */
 626     [ENOLINK] = N_("Link has been severed"),
 627 #endif
 628 #ifdef ENOMSG
 629 /* */
 630     [ENOMSG] = N_("No message of desired type"),
 631 #endif
 632 #ifdef ENOSR
 633 /* */
 634     [ENOSR] = N_("Out of streams resources"),
 635 #endif
 636 #ifdef ENOSTR
 637 /* */
 638     [ENOSTR] = N_("Device not a stream"),
 639 #endif
 640 #ifdef EOVERFLOW
 641 /* */
 642     [EOVERFLOW] = N_("Value too large for defined data type"),
 643 #endif
 644 #ifdef EPROTO
 645 /* */
 646     [EPROTO] = N_("Protocol error"),
 647 #endif
 648 #ifdef ETIME
 649 /* */
 650     [ETIME] = N_("Timer expired"),
 651 #endif
 652 #ifdef ERESTART
 653 /* */
 654     [ERESTART] = N_("Interrupted system call should be restarted"),
 655 #endif
 656 #ifdef ECHRNG
 657 /* */
 658     [ECHRNG] = N_("Channel number out of range"),
 659 #endif
 660 #ifdef EL2NSYNC
 661 /* */
 662     [EL2NSYNC] = N_("Level 2 not synchronized"),
 663 #endif
 664 #ifdef EL3HLT
 665 /* */
 666     [EL3HLT] = N_("Level 3 halted"),
 667 #endif
 668 #ifdef EL3RST
 669 /* */
 670     [EL3RST] = N_("Level 3 reset"),
 671 #endif
 672 #ifdef ELNRNG
 673 /* */
 674     [ELNRNG] = N_("Link number out of range"),
 675 #endif
 676 #ifdef EUNATCH
 677 /* */
 678     [EUNATCH] = N_("Protocol driver not attached"),
 679 #endif
 680 #ifdef ENOCSI
 681 /* */
 682     [ENOCSI] = N_("No CSI structure available"),
 683 #endif
 684 #ifdef EL2HLT
 685 /* */
 686     [EL2HLT] = N_("Level 2 halted"),
 687 #endif
 688 #ifdef EBADE
 689 /* */
 690     [EBADE] = N_("Invalid exchange"),
 691 #endif
 692 #ifdef EBADR
 693 /* */
 694     [EBADR] = N_("Invalid request descriptor"),
 695 #endif
 696 #ifdef EXFULL
 697 /* */
 698     [EXFULL] = N_("Exchange full"),
 699 #endif
 700 #ifdef ENOANO
 701 /* */
 702     [ENOANO] = N_("No anode"),
 703 #endif
 704 #ifdef EBADRQC
 705 /* */
 706     [EBADRQC] = N_("Invalid request code"),
 707 #endif
 708 #ifdef EBADSLT
 709 /* */
 710     [EBADSLT] = N_("Invalid slot"),
 711 #endif
 712 #if defined (EDEADLOCK) && EDEADLOCK != EDEADLK
 713 /* */
 714     [EDEADLOCK] = N_("File locking deadlock error"),
 715 #endif
 716 #ifdef EBFONT
 717 /* */
 718     [EBFONT] = N_("Bad font file format"),
 719 #endif
 720 #ifdef ENONET
 721 /* */
 722     [ENONET] = N_("Machine is not on the network"),
 723 #endif
 724 #ifdef ENOPKG
 725 /* */
 726     [ENOPKG] = N_("Package not installed"),
 727 #endif
 728 #ifdef EADV
 729 /* */
 730     [EADV] = N_("Advertise error"),
 731 #endif
 732 #ifdef ESRMNT
 733 /* */
 734     [ESRMNT] = N_("Srmount error"),
 735 #endif
 736 #ifdef ECOMM
 737 /* */
 738     [ECOMM] = N_("Communication error on send"),
 739 #endif
 740 #ifdef EDOTDOT
 741 /* */
 742     [EDOTDOT] = N_("RFS specific error"),
 743 #endif
 744 #ifdef ENOTUNIQ
 745 /* */
 746     [ENOTUNIQ] = N_("Name not unique on network"),
 747 #endif
 748 #ifdef EBADFD
 749 /* */
 750     [EBADFD] = N_("File descriptor in bad state"),
 751 #endif
 752 #ifdef EREMCHG
 753 /* */
 754     [EREMCHG] = N_("Remote address changed"),
 755 #endif
 756 #ifdef ELIBACC
 757 /* */
 758     [ELIBACC] = N_("Can not access a needed shared library"),
 759 #endif
 760 #ifdef ELIBBAD
 761 /* */
 762     [ELIBBAD] = N_("Accessing a corrupted shared library"),
 763 #endif
 764 #ifdef ELIBSCN
 765 /* */
 766     [ELIBSCN] = N_(".lib section in a.out corrupted"),
 767 #endif
 768 #ifdef ELIBMAX
 769 /* */
 770     [ELIBMAX] = N_("Attempting to link in too many shared libraries"),
 771 #endif
 772 #ifdef ELIBEXEC
 773 /* */
 774     [ELIBEXEC] = N_("Cannot exec a shared library directly"),
 775 #endif
 776 #ifdef ESTRPIPE
 777 /* */
 778     [ESTRPIPE] = N_("Streams pipe error"),
 779 #endif
 780 #ifdef EUCLEAN
 781 /* */
 782     [EUCLEAN] = N_("Structure needs cleaning"),
 783 #endif
 784 #ifdef ENOTNAM
 785 /* */
 786     [ENOTNAM] = N_("Not a XENIX named type file"),
 787 #endif
 788 #ifdef ENAVAIL
 789 /* */
 790     [ENAVAIL] = N_("No XENIX semaphores available"),
 791 #endif
 792 #ifdef EISNAM
 793 /* */
 794     [EISNAM] = N_("Is a named type file"),
 795 #endif
 796 #ifdef EREMOTEIO
 797 /* */
 798     [EREMOTEIO] = N_("Remote I/O error"),
 799 #endif
 800 #ifdef ENOMEDIUM
 801 /* */
 802     [ENOMEDIUM] = N_("No medium found"),
 803 #endif
 804 #ifdef EMEDIUMTYPE
 805 /* */
 806     [EMEDIUMTYPE] = N_("Wrong medium type"),
 807 #endif
 808   };
 809
 810 const int _sys_nerr = sizeof _sys_errlist / sizeof _sys_errlist[0];
 811 weak_alias (_sys_errlist, sys_errlist)
 812 weak_alias (_sys_nerr, sys_nerr)