1 /* Conversion to and from IBM939.
2 Copyright (C) 2000-2015 Free Software Foundation, Inc.
3 This file is part of the GNU C Library.
4 Contributed by Masahide Washizawa <washi@yamato.ibm.co.jp>, 2000.
6 The GNU C Library is free software; you can redistribute it and/or
7 modify it under the terms of the GNU Lesser General Public
8 License as published by the Free Software Foundation; either
9 version 2.1 of the License, or (at your option) any later version.
11 The GNU C Library is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 Lesser General Public License for more details.
16 You should have received a copy of the GNU Lesser General Public
17 License along with the GNU C Library; if not, see
18 <http://www.gnu.org/licenses/>. */
26 /* The shift sequences for this charset (it does not use ESC). */
27 #define SI 0x0F /* Shift In, host code to turn DBCS off. */
28 #define SO 0x0E /* Shift Out, host code to turn DBCS on. */
30 /* Definitions used in the body of the `gconv' function. */
31 #define CHARSET_NAME "IBM939//"
32 #define FROM_LOOP from_ibm939
33 #define TO_LOOP to_ibm939
34 #define ONE_DIRECTION 0
35 #define FROM_LOOP_MIN_NEEDED_FROM 1
36 #define FROM_LOOP_MAX_NEEDED_FROM 2
37 #define FROM_LOOP_MIN_NEEDED_TO 4
38 #define FROM_LOOP_MAX_NEEDED_TO 4
39 #define TO_LOOP_MIN_NEEDED_FROM 4
40 #define TO_LOOP_MAX_NEEDED_FROM 4
41 #define TO_LOOP_MIN_NEEDED_TO 1
42 #define TO_LOOP_MAX_NEEDED_TO 3
43 #define PREPARE_LOOP \
45 int *curcsp = &data->__statep->__count;
46 #define EXTRA_LOOP_ARGS , curcsp
48 /* Definitions of initialization and destructor function. */
53 /* Since this is a stateful encoding we have to provide code which resets
54 the output state to the initial state. This has to be done during the
56 #define EMIT_SHIFT_TO_INIT \
57 if ((data->__statep->__count & ~7) != sb) \
60 data->__statep->__count &= 7; \
63 /* We are not in the initial state. To switch back we have \
65 if (__glibc_unlikely (outbuf >= outend)) \
66 /* We don't have enough room in the output buffer. */ \
67 status = __GCONV_FULL_OUTPUT; \
70 /* Write out the shift sequence. */ \
72 data->__statep->__count &= 7; \
78 /* Since we might have to reset input pointer we must be able to save
79 and retore the state. */
80 #define SAVE_RESET_STATE(Save) \
82 save_curcs = *curcsp; \
87 /* Current codeset type. */
94 /* First, define the conversion function from IBM-939 to UCS4. */
95 #define MIN_NEEDED_INPUT FROM_LOOP_MIN_NEEDED_FROM
96 #define MAX_NEEDED_INPUT FROM_LOOP_MAX_NEEDED_FROM
97 #define MIN_NEEDED_OUTPUT FROM_LOOP_MIN_NEEDED_TO
98 #define MAX_NEEDED_OUTPUT FROM_LOOP_MAX_NEEDED_TO
99 #define LOOPFCT FROM_LOOP
102 uint32_t ch = *inptr; \
105 if (__builtin_expect (ch, 0) == SO) \
107 /* Shift OUT, change to DBCS converter. */ \
110 result = __GCONV_ILLEGAL_INPUT; \
117 else if (__builtin_expect (ch, 0) == SI) \
119 /* Shift IN, change to SBCS converter. */ \
122 result = __GCONV_ILLEGAL_INPUT; \
132 /* Use the IBM939 table for single byte. */ \
133 res = __ibm939sb_to_ucs4[ch]; \
134 if (__builtin_expect (res == L'\0', 0) && ch != '\0') \
136 /* This is an illegal character. */ \
137 STANDARD_FROM_LOOP_ERR_HANDLER (1); \
141 put32 (outptr, res); \
148 /* Use the IBM939 table for double byte. */ \
149 const struct gap *rp2 = __ibm939db_to_ucs4_idx; \
151 assert (curcs == db); \
153 if (__glibc_unlikely (inptr + 1 >= inend)) \
155 /* The second character is not available. Store the \
156 intermediate result. */ \
157 result = __GCONV_INCOMPLETE_INPUT; \
161 ch = (ch * 0x100) + inptr[1]; \
162 while (ch > rp2->end) \
165 if (__builtin_expect (rp2->start == 0xffff, 0) \
166 || __builtin_expect (ch < rp2->start, 0) \
167 || (res = __ibm939db_to_ucs4[ch + rp2->idx], \
168 __builtin_expect (res, L'\1') == L'\0' && ch != '\0')) \
170 /* This is an illegal character. */ \
171 STANDARD_FROM_LOOP_ERR_HANDLER (2); \
175 put32 (outptr, res); \
181 #define LOOP_NEED_FLAGS
182 #define EXTRA_LOOP_DECLS , int *curcsp
183 #define INIT_PARAMS int curcs = *curcsp & ~7
184 #define UPDATE_PARAMS *curcsp = curcs
185 #include <iconv/loop.c>
187 /* Next, define the other direction */
188 #define MIN_NEEDED_INPUT TO_LOOP_MIN_NEEDED_FROM
189 #define MAX_NEEDED_INPUT TO_LOOP_MAX_NEEDED_FROM
190 #define MIN_NEEDED_OUTPUT TO_LOOP_MIN_NEEDED_TO
191 #define MAX_NEEDED_OUTPUT TO_LOOP_MAX_NEEDED_TO
192 #define LOOPFCT TO_LOOP
195 uint32_t ch = get32 (inptr); \
196 const struct gap *rp1 = __ucs4_to_ibm939sb_idx; \
197 const struct gap *rp2 = __ucs4_to_ibm939db_idx; \
200 if (__glibc_unlikely (ch >= 0xffff)) \
202 UNICODE_TAG_HANDLER (ch, 4); \
203 goto ibm939_invalid_char; \
206 while (ch > rp1->end) \
209 /* Use the UCS4 table for single byte. */ \
210 if (__builtin_expect (ch < rp1->start, 0) \
211 || (cp = __ucs4_to_ibm939sb[ch + rp1->idx], \
212 __builtin_expect (cp[0], L'\1') == L'\0' && ch != '\0')) \
214 /* Use the UCS4 table for double byte. */ \
215 while (ch > rp2->end) \
218 if (__builtin_expect (ch < rp2->start, 0) \
219 || (cp = __ucs4_to_ibm939db[ch + rp2->idx], \
220 __builtin_expect (cp[0], L'\1')==L'\0' && ch != '\0')) \
222 /* This is an illegal character. */ \
223 ibm939_invalid_char: \
224 STANDARD_TO_LOOP_ERR_HANDLER (4); \
230 if (__glibc_unlikely (outptr + 1 > outend)) \
232 result = __GCONV_FULL_OUTPUT; \
239 if (__glibc_unlikely (outptr + 2 > outend)) \
241 result = __GCONV_FULL_OUTPUT; \
252 if (__glibc_unlikely (outptr + 1 > outend)) \
254 result = __GCONV_FULL_OUTPUT; \
260 if (__glibc_unlikely (outptr + 1 > outend)) \
262 result = __GCONV_FULL_OUTPUT; \
267 else if (ch == 0x5c) \
274 /* Now that we wrote the output increment the input pointer. */ \
277 #define LOOP_NEED_FLAGS
278 #define EXTRA_LOOP_DECLS , int *curcsp
279 #define INIT_PARAMS int curcs = *curcsp & ~7
280 #define REINIT_PARAMS curcs = *curcsp & ~7
281 #define UPDATE_PARAMS *curcsp = curcs
282 #include <iconv/loop.c>
284 /* Now define the toplevel functions. */
285 #include <iconv/skeleton.c>