2 * Copyright (c) 1983, 1992, 1993
3 * The Regents of the University of California. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 4. Neither the name of the University nor the names of its contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #if !defined(lint) && !defined(KERNEL) && defined(LIBC_SCCS)
31 static char sccsid
[] = "@(#)mcount.c 8.1 (Berkeley) 6/4/93";
34 #include <sys/param.h>
37 /* This file provides the machine-dependent definitions of the _MCOUNT_DECL
39 #include "machine-gmon.h"
41 #include <atomicity.h>
44 * mcount is called on entry to each function compiled with the profiling
45 * switch set. _mcount(), which is declared in a machine-dependent way
46 * with _MCOUNT_DECL, does the actual work and is either inlined into a
47 * C routine or called by an assembly stub. In any case, this magic is
48 * taken care of by the MCOUNT definition in <machine/profile.h>.
50 * _mcount updates data structures that represent traversals of the
51 * program's call graph edges. frompc and selfpc are the return
52 * address and function address that represents the given call graph edge.
54 * Note: the original BSD code used the same variable (frompcindex) for
55 * both frompcindex and frompc. Any reasonable, modern compiler will
56 * perform this optimization.
58 _MCOUNT_DECL(frompc
, selfpc
) /* _mcount; may be static, inline, etc */
60 register u_short
*frompcindex
;
61 register struct tostruct
*top
, *prevtop
;
62 register struct gmonparam
*p
;
63 register long toindex
;
68 * check that we are profiling
69 * and that we aren't recursively invoked.
71 if (! compare_and_swap (&p
->state
, GMON_PROF_ON
, GMON_PROF_BUSY
))
75 * check that frompcindex is a reasonable pc value.
76 * for example: signal catchers get called from the stack,
77 * not from text space. too bad.
80 if (frompc
> p
->textsize
)
83 /* The following test used to be
84 if (p->log_hashfraction >= 0)
85 But we can simplify this if we assume the profiling data
86 is always initialized by the functions in gmon.c. But
87 then it is possible to avoid a runtime check and use the
88 smae `if' as in gmon.c. So keep these tests in sync. */
89 if ((HASHFRACTION
& (HASHFRACTION
- 1)) == 0) {
90 /* avoid integer divide if possible: */
91 i
= frompc
>> p
->log_hashfraction
;
93 i
= frompc
/ (p
->hashfraction
* sizeof(*p
->froms
));
95 frompcindex
= &p
->froms
[i
];
96 toindex
= *frompcindex
;
99 * first time traversing this arc
101 toindex
= ++p
->tos
[0].link
;
102 if (toindex
>= p
->tolimit
)
103 /* halt further profiling */
106 *frompcindex
= toindex
;
107 top
= &p
->tos
[toindex
];
108 top
->selfpc
= selfpc
;
113 top
= &p
->tos
[toindex
];
114 if (top
->selfpc
== selfpc
) {
116 * arc at front of chain; usual case.
122 * have to go looking down chain for it.
123 * top points to what we are looking at,
124 * prevtop points to previous top.
125 * we know it is not at the head of the chain.
127 for (; /* goto done */; ) {
128 if (top
->link
== 0) {
130 * top is end of the chain and none of the chain
131 * had top->selfpc == selfpc.
132 * so we allocate a new tostruct
133 * and link it to the head of the chain.
135 toindex
= ++p
->tos
[0].link
;
136 if (toindex
>= p
->tolimit
)
139 top
= &p
->tos
[toindex
];
140 top
->selfpc
= selfpc
;
142 top
->link
= *frompcindex
;
143 *frompcindex
= toindex
;
147 * otherwise, check the next arc on the chain.
150 top
= &p
->tos
[top
->link
];
151 if (top
->selfpc
== selfpc
) {
154 * increment its count
155 * move it to the head of the chain.
158 toindex
= prevtop
->link
;
159 prevtop
->link
= top
->link
;
160 top
->link
= *frompcindex
;
161 *frompcindex
= toindex
;
167 p
->state
= GMON_PROF_ON
;
170 p
->state
= GMON_PROF_ERROR
;
175 * Actual definition of mcount function. Defined in <machine/profile.h>,
176 * which is included by <sys/gmon.h>.