git-bisect.sh

   1 #!/bin/sh
   2
   3 USAGE='[help|start|bad|good|skip|next|reset|visualize|replay|log|run]'
   4 LONG_USAGE='git bisect help
   5         print this long help message.
   6 git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...]
   7         reset bisect state and start bisection.
   8 git bisect bad [<rev>]
   9         mark <rev> a known-bad revision.
  10 git bisect good [<rev>...]
  11         mark <rev>... known-good revisions.
  12 git bisect skip [(<rev>|<range>)...]
  13         mark <rev>... untestable revisions.
  14 git bisect next
  15         find next bisection to test and check it out.
  16 git bisect reset [<commit>]
  17         finish bisection search and go back to commit.
  18 git bisect visualize
  19         show bisect status in gitk.
  20 git bisect replay <logfile>
  21         replay bisection log.
  22 git bisect log
  23         show bisect log.
  24 git bisect run <cmd>...
  25         use <cmd>... to automatically bisect.
  26
  27 Please use "git help bisect" to get the full man page.'
  28
  29 OPTIONS_SPEC=
  30 . git-sh-setup
  31 . git-sh-i18n
  32
  33 _x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
  34 _x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
  35
  36 bisect_head()
  37 {
  38         if test -f "$GIT_DIR/BISECT_HEAD"
  39         then
  40                 echo BISECT_HEAD
  41         else
  42                 echo HEAD
  43         fi
  44 }
  45
  46 bisect_autostart() {
  47         test -s "$GIT_DIR/BISECT_START" || {
  48                 gettextln "You need to start by \"git bisect start\"" >&2
  49                 if test -t 0
  50                 then
  51                         # TRANSLATORS: Make sure to include [Y] and [n] in your
  52                         # translation. The program will only accept English input
  53                         # at this point.
  54                         gettext "Do you want me to do it for you [Y/n]? " >&2
  55                         read yesno
  56                         case "$yesno" in
  57                         [Nn]*)
  58                                 exit ;;
  59                         esac
  60                         bisect_start
  61                 else
  62                         exit 1
  63                 fi
  64         }
  65 }
  66
  67 bisect_start() {
  68         #
  69         # Check for one bad and then some good revisions.
  70         #
  71         has_double_dash=0
  72         for arg; do
  73                 case "$arg" in --) has_double_dash=1; break ;; esac
  74         done
  75         orig_args=$(git rev-parse --sq-quote "$@")
  76         bad_seen=0
  77         eval=''
  78         if test "z$(git rev-parse --is-bare-repository)" != zfalse
  79         then
  80                 mode=--no-checkout
  81         else
  82                 mode=''
  83         fi
  84         while [ $# -gt 0 ]; do
  85                 arg="$1"
  86                 case "$arg" in
  87                 --)
  88                         shift
  89                         break
  90                 ;;
  91                 --no-checkout)
  92                         mode=--no-checkout
  93                         shift ;;
  94                 --*)
  95                         die "$(eval_gettext "unrecognised option: '\$arg'")" ;;
  96                 *)
  97                         rev=$(git rev-parse -q --verify "$arg^{commit}") || {
  98                                 test $has_double_dash -eq 1 &&
  99                                 die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
 100                                 break
 101                         }
 102                         case $bad_seen in
 103                         0) state='bad' ; bad_seen=1 ;;
 104                         *) state='good' ;;
 105                         esac
 106                         eval="$eval bisect_write '$state' '$rev' 'nolog' &&"
 107                         shift
 108                         ;;
 109                 esac
 110         done
 111
 112         #
 113         # Verify HEAD.
 114         #
 115         head=$(GIT_DIR="$GIT_DIR" git symbolic-ref -q HEAD) ||
 116         head=$(GIT_DIR="$GIT_DIR" git rev-parse --verify HEAD) ||
 117         die "$(gettext "Bad HEAD - I need a HEAD")"
 118
 119         #
 120         # Check if we are bisecting.
 121         #
 122         start_head=''
 123         if test -s "$GIT_DIR/BISECT_START"
 124         then
 125                 # Reset to the rev from where we started.
 126                 start_head=$(cat "$GIT_DIR/BISECT_START")
 127                 if test "z$mode" != "z--no-checkout"
 128                 then
 129                         git checkout "$start_head" -- ||
 130                         die "$(eval_gettext "Checking out '\$start_head' failed. Try 'git bisect reset <validbranch>'.")"
 131                 fi
 132         else
 133                 # Get rev from where we start.
 134                 case "$head" in
 135                 refs/heads/*|$_x40)
 136                         # This error message should only be triggered by
 137                         # cogito usage, and cogito users should understand
 138                         # it relates to cg-seek.
 139                         [ -s "$GIT_DIR/head-name" ] &&
 140                                 die "$(gettext "won't bisect on seeked tree")"
 141                         start_head="${head#refs/heads/}"
 142                         ;;
 143                 *)
 144                         die "$(gettext "Bad HEAD - strange symbolic ref")"
 145                         ;;
 146                 esac
 147         fi
 148
 149         #
 150         # Get rid of any old bisect state.
 151         #
 152         bisect_clean_state || exit
 153
 154         #
 155         # Change state.
 156         # In case of mistaken revs or checkout error, or signals received,
 157         # "bisect_auto_next" below may exit or misbehave.
 158         # We have to trap this to be able to clean up using
 159         # "bisect_clean_state".
 160         #
 161         trap 'bisect_clean_state' 0
 162         trap 'exit 255' 1 2 3 15
 163
 164         #
 165         # Write new start state.
 166         #
 167         echo "$start_head" >"$GIT_DIR/BISECT_START" && {
 168                 test "z$mode" != "z--no-checkout" ||
 169                 git update-ref --no-deref BISECT_HEAD "$start_head"
 170         } &&
 171         git rev-parse --sq-quote "$@" >"$GIT_DIR/BISECT_NAMES" &&
 172         eval "$eval true" &&
 173         echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit
 174         #
 175         # Check if we can proceed to the next bisect state.
 176         #
 177         bisect_auto_next
 178
 179         trap '-' 0
 180 }
 181
 182 bisect_write() {
 183         state="$1"
 184         rev="$2"
 185         nolog="$3"
 186         case "$state" in
 187                 bad)            tag="$state" ;;
 188                 good|skip)      tag="$state"-"$rev" ;;
 189                 *)              die "$(eval_gettext "Bad bisect_write argument: \$state")" ;;
 190         esac
 191         git update-ref "refs/bisect/$tag" "$rev" || exit
 192         echo "# $state: $(git show-branch $rev)" >>"$GIT_DIR/BISECT_LOG"
 193         test -n "$nolog" || echo "git bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
 194 }
 195
 196 is_expected_rev() {
 197         test -f "$GIT_DIR/BISECT_EXPECTED_REV" &&
 198         test "$1" = $(cat "$GIT_DIR/BISECT_EXPECTED_REV")
 199 }
 200
 201 check_expected_revs() {
 202         for _rev in "$@"; do
 203                 if ! is_expected_rev "$_rev"
 204                 then
 205                         rm -f "$GIT_DIR/BISECT_ANCESTORS_OK"
 206                         rm -f "$GIT_DIR/BISECT_EXPECTED_REV"
 207                         return
 208                 fi
 209         done
 210 }
 211
 212 bisect_skip() {
 213         all=''
 214         for arg in "$@"
 215         do
 216                 case "$arg" in
 217                 *..*)
 218                         revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;;
 219                 *)
 220                         revs=$(git rev-parse --sq-quote "$arg") ;;
 221                 esac
 222                 all="$all $revs"
 223         done
 224         eval bisect_state 'skip' $all
 225 }
 226
 227 bisect_state() {
 228         bisect_autostart
 229         state=$1
 230         case "$#,$state" in
 231         0,*)
 232                 die "$(gettext "Please call 'bisect_state' with at least one argument.")" ;;
 233         1,bad|1,good|1,skip)
 234                 rev=$(git rev-parse --verify $(bisect_head)) ||
 235                         die "$(gettext "Bad rev input: $(bisect_head)")"
 236                 bisect_write "$state" "$rev"
 237                 check_expected_revs "$rev" ;;
 238         2,bad|*,good|*,skip)
 239                 shift
 240                 eval=''
 241                 for rev in "$@"
 242                 do
 243                         sha=$(git rev-parse --verify "$rev^{commit}") ||
 244                                 die "$(eval_gettext "Bad rev input: \$rev")"
 245                         eval="$eval bisect_write '$state' '$sha'; "
 246                 done
 247                 eval "$eval"
 248                 check_expected_revs "$@" ;;
 249         *,bad)
 250                 die "$(gettext "'git bisect bad' can take only one argument.")" ;;
 251         *)
 252                 usage ;;
 253         esac
 254         bisect_auto_next
 255 }
 256
 257 bisect_next_check() {
 258         missing_good= missing_bad=
 259         git show-ref -q --verify refs/bisect/bad || missing_bad=t
 260         test -n "$(git for-each-ref "refs/bisect/good-*")" || missing_good=t
 261
 262         case "$missing_good,$missing_bad,$1" in
 263         ,,*)
 264                 : have both good and bad - ok
 265                 ;;
 266         *,)
 267                 # do not have both but not asked to fail - just report.
 268                 false
 269                 ;;
 270         t,,good)
 271                 # have bad but not good.  we could bisect although
 272                 # this is less optimum.
 273                 gettextln "Warning: bisecting only with a bad commit." >&2
 274                 if test -t 0
 275                 then
 276                         # TRANSLATORS: Make sure to include [Y] and [n] in your
 277                         # translation. The program will only accept English input
 278                         # at this point.
 279                         gettext "Are you sure [Y/n]? " >&2
 280                         read yesno
 281                         case "$yesno" in [Nn]*) exit 1 ;; esac
 282                 fi
 283                 : bisect without good...
 284                 ;;
 285         *)
 286
 287                 if test -s "$GIT_DIR/BISECT_START"
 288                 then
 289                         gettextln "You need to give me at least one good and one bad revisions.
 290 (You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2
 291                 else
 292                         gettextln "You need to start by \"git bisect start\".
 293 You then need to give me at least one good and one bad revisions.
 294 (You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2
 295                 fi
 296                 exit 1 ;;
 297         esac
 298 }
 299
 300 bisect_auto_next() {
 301         bisect_next_check && bisect_next || :
 302 }
 303
 304 bisect_next() {
 305         case "$#" in 0) ;; *) usage ;; esac
 306         bisect_autostart
 307         bisect_next_check good
 308
 309         # Perform all bisection computation, display and checkout
 310         git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout)
 311         res=$?
 312
 313         # Check if we should exit because bisection is finished
 314         if test $res -eq 10
 315         then
 316                 bad_rev=$(git show-ref --hash --verify refs/bisect/bad)
 317                 bad_commit=$(git show-branch $bad_rev)
 318                 echo "# first bad commit: $bad_commit" >>"$GIT_DIR/BISECT_LOG"
 319                 exit 0
 320         elif test $res -eq 2
 321         then
 322                 echo "# only skipped commits left to test" >>"$GIT_DIR/BISECT_LOG"
 323                 good_revs=$(git for-each-ref --format="%(objectname)" "refs/bisect/good-*")
 324                 for skipped in $(git rev-list refs/bisect/bad --not $good_revs)
 325                 do
 326                         skipped_commit=$(git show-branch $skipped)
 327                         echo "# possible first bad commit: $skipped_commit" >>"$GIT_DIR/BISECT_LOG"
 328                 done
 329                 exit $res
 330         fi
 331
 332         # Check for an error in the bisection process
 333         test $res -ne 0 && exit $res
 334
 335         return 0
 336 }
 337
 338 bisect_visualize() {
 339         bisect_next_check fail
 340
 341         if test $# = 0
 342         then
 343                 if test -n "${DISPLAY+set}${SESSIONNAME+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" &&
 344                         type gitk >/dev/null 2>&1
 345                 then
 346                         set gitk
 347                 else
 348                         set git log
 349                 fi
 350         else
 351                 case "$1" in
 352                 git*|tig) ;;
 353                 -*)     set git log "$@" ;;
 354                 *)      set git "$@" ;;
 355                 esac
 356         fi
 357
 358         eval '"$@"' --bisect -- $(cat "$GIT_DIR/BISECT_NAMES")
 359 }
 360
 361 bisect_reset() {
 362         test -s "$GIT_DIR/BISECT_START" || {
 363                 gettextln "We are not bisecting."
 364                 return
 365         }
 366         case "$#" in
 367         0) branch=$(cat "$GIT_DIR/BISECT_START") ;;
 368         1) git rev-parse --quiet --verify "$1^{commit}" > /dev/null || {
 369                         invalid="$1"
 370                         die "$(eval_gettext "'\$invalid' is not a valid commit")"
 371                 }
 372                 branch="$1" ;;
 373         *)
 374                 usage ;;
 375         esac
 376
 377         if ! test -f "$GIT_DIR/BISECT_HEAD" && ! git checkout "$branch" --
 378         then
 379                 die "$(eval_gettext "Could not check out original HEAD '\$branch'.
 380 Try 'git bisect reset <commit>'.")"
 381         fi
 382         bisect_clean_state
 383 }
 384
 385 bisect_clean_state() {
 386         # There may be some refs packed during bisection.
 387         git for-each-ref --format='%(refname) %(objectname)' refs/bisect/\* |
 388         while read ref hash
 389         do
 390                 git update-ref -d $ref $hash || exit
 391         done
 392         rm -f "$GIT_DIR/BISECT_EXPECTED_REV" &&
 393         rm -f "$GIT_DIR/BISECT_ANCESTORS_OK" &&
 394         rm -f "$GIT_DIR/BISECT_LOG" &&
 395         rm -f "$GIT_DIR/BISECT_NAMES" &&
 396         rm -f "$GIT_DIR/BISECT_RUN" &&
 397         # Cleanup head-name if it got left by an old version of git-bisect
 398         rm -f "$GIT_DIR/head-name" &&
 399         git update-ref -d --no-deref BISECT_HEAD &&
 400         # clean up BISECT_START last
 401         rm -f "$GIT_DIR/BISECT_START"
 402 }
 403
 404 bisect_replay () {
 405         file="$1"
 406         test "$#" -eq 1 || die "$(gettext "No logfile given")"
 407         test -r "$file" || die "$(eval_gettext "cannot read \$file for replaying")"
 408         bisect_reset
 409         while read git bisect command rev
 410         do
 411                 test "$git $bisect" = "git bisect" -o "$git" = "git-bisect" || continue
 412                 if test "$git" = "git-bisect"
 413                 then
 414                         rev="$command"
 415                         command="$bisect"
 416                 fi
 417                 case "$command" in
 418                 start)
 419                         cmd="bisect_start $rev"
 420                         eval "$cmd" ;;
 421                 good|bad|skip)
 422                         bisect_write "$command" "$rev" ;;
 423                 *)
 424                         die "$(gettext "?? what are you talking about?")" ;;
 425                 esac
 426         done <"$file"
 427         bisect_auto_next
 428 }
 429
 430 bisect_run () {
 431         bisect_next_check fail
 432
 433         while true
 434         do
 435                 command="$@"
 436                 eval_gettextln "running \$command"
 437                 "$@"
 438                 res=$?
 439
 440                 # Check for really bad run error.
 441                 if [ $res -lt 0 -o $res -ge 128 ]
 442                 then
 443                         eval_gettextln "bisect run failed:
 444 exit code \$res from '\$command' is < 0 or >= 128" >&2
 445                         exit $res
 446                 fi
 447
 448                 # Find current state depending on run success or failure.
 449                 # A special exit code of 125 means cannot test.
 450                 if [ $res -eq 125 ]
 451                 then
 452                         state='skip'
 453                 elif [ $res -gt 0 ]
 454                 then
 455                         state='bad'
 456                 else
 457                         state='good'
 458                 fi
 459
 460                 # We have to use a subshell because "bisect_state" can exit.
 461                 ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
 462                 res=$?
 463
 464                 cat "$GIT_DIR/BISECT_RUN"
 465
 466                 if sane_grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
 467                         > /dev/null
 468                 then
 469                         gettextln "bisect run cannot continue any more" >&2
 470                         exit $res
 471                 fi
 472
 473                 if [ $res -ne 0 ]
 474                 then
 475                         eval_gettextln "bisect run failed:
 476 'bisect_state \$state' exited with error code \$res" >&2
 477                         exit $res
 478                 fi
 479
 480                 if sane_grep "is the first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null
 481                 then
 482                         gettextln "bisect run success"
 483                         exit 0;
 484                 fi
 485
 486         done
 487 }
 488
 489 bisect_log () {
 490         test -s "$GIT_DIR/BISECT_LOG" || die "$(gettext "We are not bisecting.")"
 491         cat "$GIT_DIR/BISECT_LOG"
 492 }
 493
 494 case "$#" in
 495 0)
 496         usage ;;
 497 *)
 498         cmd="$1"
 499         shift
 500         case "$cmd" in
 501         help)
 502                 git bisect -h ;;
 503         start)
 504                 bisect_start "$@" ;;
 505         bad|good)
 506                 bisect_state "$cmd" "$@" ;;
 507         skip)
 508                 bisect_skip "$@" ;;
 509         next)
 510                 # Not sure we want "next" at the UI level anymore.
 511                 bisect_next "$@" ;;
 512         visualize|view)
 513                 bisect_visualize "$@" ;;
 514         reset)
 515                 bisect_reset "$@" ;;
 516         replay)
 517                 bisect_replay "$@" ;;
 518         log)
 519                 bisect_log ;;
 520         run)
 521                 bisect_run "$@" ;;
 522         *)
 523                 usage ;;
 524         esac
 525 esac