MinGW tests: override 'pwd', too
[git/mingw/4msysgit/wingit-dll.git] / git-rebase.sh
blobebd4df3a0e821ddcfd1eabfcaac17f854e172a85
1 #!/bin/sh
3 # Copyright (c) 2005 Junio C Hamano.
6 USAGE='[--interactive | -i] [-v] [--onto <newbase>] <upstream> [<branch>]'
7 LONG_USAGE='git-rebase replaces <branch> with a new branch of the
8 same name. When the --onto option is provided the new branch starts
9 out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
10 It then attempts to create a new commit for each commit from the original
11 <branch> that does not exist in the <upstream> branch.
13 It is possible that a merge failure will prevent this process from being
14 completely automatic. You will have to resolve any such merge failure
15 and run git rebase --continue. Another option is to bypass the commit
16 that caused the merge failure with git rebase --skip. To restore the
17 original <branch> and remove the .git/rebase-apply working files, use the
18 command git rebase --abort instead.
20 Note that if <branch> is not specified on the command line, the
21 currently checked out branch is used.
23 Example: git-rebase master~1 topic
25 A---B---C topic A'\''--B'\''--C'\'' topic
26 / --> /
27 D---E---F---G master D---E---F---G master
30 SUBDIRECTORY_OK=Yes
31 OPTIONS_SPEC=
32 . git-sh-setup
33 set_reflog_action rebase
34 require_work_tree
35 cd_to_toplevel
37 OK_TO_SKIP_PRE_REBASE=
38 RESOLVEMSG="
39 When you have resolved this problem run \"git rebase --continue\".
40 If you would prefer to skip this patch, instead run \"git rebase --skip\".
41 To restore the original branch and stop rebasing run \"git rebase --abort\".
43 unset newbase
44 strategy=recursive
45 do_merge=
46 dotest="$GIT_DIR"/rebase-merge
47 prec=4
48 verbose=
49 git_am_opt=
51 continue_merge () {
52 test -n "$prev_head" || die "prev_head must be defined"
53 test -d "$dotest" || die "$dotest directory does not exist"
55 unmerged=$(git ls-files -u)
56 if test -n "$unmerged"
57 then
58 echo "You still have unmerged paths in your index"
59 echo "did you forget to use git add?"
60 die "$RESOLVEMSG"
63 cmt=`cat "$dotest/current"`
64 if ! git diff-index --quiet --ignore-submodules HEAD --
65 then
66 if ! git commit --no-verify -C "$cmt"
67 then
68 echo "Commit failed, please do not call \"git commit\""
69 echo "directly, but instead do one of the following: "
70 die "$RESOLVEMSG"
72 printf "Committed: %0${prec}d " $msgnum
73 else
74 printf "Already applied: %0${prec}d " $msgnum
76 git rev-list --pretty=oneline -1 "$cmt" | sed -e 's/^[^ ]* //'
78 prev_head=`git rev-parse HEAD^0`
79 # save the resulting commit so we can read-tree on it later
80 echo "$prev_head" > "$dotest/prev_head"
82 # onto the next patch:
83 msgnum=$(($msgnum + 1))
84 echo "$msgnum" >"$dotest/msgnum"
87 call_merge () {
88 cmt="$(cat "$dotest/cmt.$1")"
89 echo "$cmt" > "$dotest/current"
90 hd=$(git rev-parse --verify HEAD)
91 cmt_name=$(git symbolic-ref HEAD 2> /dev/null || echo HEAD)
92 msgnum=$(cat "$dotest/msgnum")
93 end=$(cat "$dotest/end")
94 eval GITHEAD_$cmt='"${cmt_name##refs/heads/}~$(($end - $msgnum))"'
95 eval GITHEAD_$hd='$(cat "$dotest/onto_name")'
96 export GITHEAD_$cmt GITHEAD_$hd
97 git-merge-$strategy "$cmt^" -- "$hd" "$cmt"
98 rv=$?
99 case "$rv" in
101 unset GITHEAD_$cmt GITHEAD_$hd
102 return
105 git rerere
106 die "$RESOLVEMSG"
109 echo "Strategy: $rv $strategy failed, try another" 1>&2
110 die "$RESOLVEMSG"
113 die "Unknown exit code ($rv) from command:" \
114 "git-merge-$strategy $cmt^ -- HEAD $cmt"
116 esac
119 move_to_original_branch () {
120 test -z "$head_name" &&
121 head_name="$(cat "$dotest"/head-name)" &&
122 onto="$(cat "$dotest"/onto)" &&
123 orig_head="$(cat "$dotest"/orig-head)"
124 case "$head_name" in
125 refs/*)
126 message="rebase finished: $head_name onto $onto"
127 git update-ref -m "$message" \
128 $head_name $(git rev-parse HEAD) $orig_head &&
129 git symbolic-ref HEAD $head_name ||
130 die "Could not move back to $head_name"
132 esac
135 finish_rb_merge () {
136 move_to_original_branch
137 rm -r "$dotest"
138 echo "All done."
141 is_interactive () {
142 while test $# != 0
144 case "$1" in
145 -i|--interactive)
146 interactive_rebase=explicit
147 break
149 -p|--preserve-merges)
150 interactive_rebase=implied
152 esac
153 shift
154 done
156 if [ "$interactive_rebase" = implied ]; then
157 GIT_EDITOR=:
158 export GIT_EDITOR
161 test -n "$interactive_rebase" || test -f "$dotest"/interactive
164 run_pre_rebase_hook () {
165 if test -z "$OK_TO_SKIP_PRE_REBASE" &&
166 test -x "$GIT_DIR/hooks/pre-rebase"
167 then
168 "$GIT_DIR/hooks/pre-rebase" ${1+"$@"} || {
169 echo >&2 "The pre-rebase hook refused to rebase."
170 exit 1
175 test -f "$GIT_DIR"/rebase-apply/applying &&
176 die 'It looks like git-am is in progress. Cannot rebase.'
178 is_interactive "$@" && exec git-rebase--interactive "$@"
180 if test $# -eq 0
181 then
182 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply || usage
183 test -d "$dotest" -o -f "$GIT_DIR"/rebase-apply/rebasing &&
184 die 'A rebase is in progress, try --continue, --skip or --abort.'
185 die "No arguments given and $GIT_DIR/rebase-apply already exists."
188 while test $# != 0
190 case "$1" in
191 --no-verify)
192 OK_TO_SKIP_PRE_REBASE=yes
194 --continue)
195 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
196 die "No rebase in progress?"
198 git diff-files --quiet --ignore-submodules || {
199 echo "You must edit all merge conflicts and then"
200 echo "mark them as resolved using git add"
201 exit 1
203 if test -d "$dotest"
204 then
205 prev_head=$(cat "$dotest/prev_head")
206 end=$(cat "$dotest/end")
207 msgnum=$(cat "$dotest/msgnum")
208 onto=$(cat "$dotest/onto")
209 continue_merge
210 while test "$msgnum" -le "$end"
212 call_merge "$msgnum"
213 continue_merge
214 done
215 finish_rb_merge
216 exit
218 head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
219 onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
220 orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
221 git am --resolved --3way --resolvemsg="$RESOLVEMSG" &&
222 move_to_original_branch
223 exit
225 --skip)
226 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
227 die "No rebase in progress?"
229 git reset --hard HEAD || exit $?
230 if test -d "$dotest"
231 then
232 git rerere clear
233 prev_head=$(cat "$dotest/prev_head")
234 end=$(cat "$dotest/end")
235 msgnum=$(cat "$dotest/msgnum")
236 msgnum=$(($msgnum + 1))
237 onto=$(cat "$dotest/onto")
238 while test "$msgnum" -le "$end"
240 call_merge "$msgnum"
241 continue_merge
242 done
243 finish_rb_merge
244 exit
246 head_name=$(cat "$GIT_DIR"/rebase-apply/head-name) &&
247 onto=$(cat "$GIT_DIR"/rebase-apply/onto) &&
248 orig_head=$(cat "$GIT_DIR"/rebase-apply/orig-head) &&
249 git am -3 --skip --resolvemsg="$RESOLVEMSG" &&
250 move_to_original_branch
251 exit
253 --abort)
254 test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
255 die "No rebase in progress?"
257 git rerere clear
258 if test -d "$dotest"
259 then
260 move_to_original_branch
261 else
262 dotest="$GIT_DIR"/rebase-apply
263 move_to_original_branch
265 git reset --hard $(cat "$dotest/orig-head")
266 rm -r "$dotest"
267 exit
269 --onto)
270 test 2 -le "$#" || usage
271 newbase="$2"
272 shift
274 -M|-m|--m|--me|--mer|--merg|--merge)
275 do_merge=t
277 -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
278 --strateg=*|--strategy=*|\
279 -s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
280 case "$#,$1" in
281 *,*=*)
282 strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
283 1,*)
284 usage ;;
286 strategy="$2"
287 shift ;;
288 esac
289 do_merge=t
291 -v|--verbose)
292 verbose=t
294 --whitespace=*)
295 git_am_opt="$git_am_opt $1"
297 -C*)
298 git_am_opt="$git_am_opt $1"
301 usage
304 break
306 esac
307 shift
308 done
310 # Make sure we do not have $GIT_DIR/rebase-apply
311 if test -z "$do_merge"
312 then
313 if mkdir "$GIT_DIR"/rebase-apply 2>/dev/null
314 then
315 rmdir "$GIT_DIR"/rebase-apply
316 else
317 echo >&2 '
318 It seems that I cannot create a rebase-apply directory, and
319 I wonder if you are in the middle of patch application or another
320 rebase. If that is not the case, please
321 rm -fr '"$GIT_DIR"'/rebase-apply
322 and run me again. I am stopping in case you still have something
323 valuable there.'
324 exit 1
326 else
327 if test -d "$dotest"
328 then
329 die "previous rebase directory $dotest still exists." \
330 'Try git rebase (--continue | --abort | --skip)'
334 # The tree must be really really clean.
335 if ! git update-index --ignore-submodules --refresh; then
336 echo >&2 "cannot rebase: you have unstaged changes"
337 exit 1
339 diff=$(git diff-index --cached --name-status -r --ignore-submodules HEAD --)
340 case "$diff" in
341 ?*) echo >&2 "cannot rebase: your index contains uncommitted changes"
342 echo >&2 "$diff"
343 exit 1
345 esac
347 # The upstream head must be given. Make sure it is valid.
348 upstream_name="$1"
349 upstream=`git rev-parse --verify "${upstream_name}^0"` ||
350 die "invalid upstream $upstream_name"
352 # Make sure the branch to rebase onto is valid.
353 onto_name=${newbase-"$upstream_name"}
354 onto=$(git rev-parse --verify "${onto_name}^0") || exit
356 # If a hook exists, give it a chance to interrupt
357 run_pre_rebase_hook ${1+"$@"}
359 # If the branch to rebase is given, that is the branch we will rebase
360 # $branch_name -- branch being rebased, or HEAD (already detached)
361 # $orig_head -- commit object name of tip of the branch before rebasing
362 # $head_name -- refs/heads/<that-branch> or "detached HEAD"
363 switch_to=
364 case "$#" in
366 # Is it "rebase other $branchname" or "rebase other $commit"?
367 branch_name="$2"
368 switch_to="$2"
370 if git show-ref --verify --quiet -- "refs/heads/$2" &&
371 branch=$(git rev-parse -q --verify "refs/heads/$2")
372 then
373 head_name="refs/heads/$2"
374 elif branch=$(git rev-parse -q --verify "$2")
375 then
376 head_name="detached HEAD"
377 else
378 usage
382 # Do not need to switch branches, we are already on it.
383 if branch_name=`git symbolic-ref -q HEAD`
384 then
385 head_name=$branch_name
386 branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
387 else
388 head_name="detached HEAD"
389 branch_name=HEAD ;# detached
391 branch=$(git rev-parse --verify "${branch_name}^0") || exit
393 esac
394 orig_head=$branch
396 # Now we are rebasing commits $upstream..$branch on top of $onto
398 # Check if we are already based on $onto with linear history,
399 # but this should be done only when upstream and onto are the same.
400 mb=$(git merge-base "$onto" "$branch")
401 if test "$upstream" = "$onto" && test "$mb" = "$onto" &&
402 # linear history?
403 ! (git rev-list --parents "$onto".."$branch" | grep " .* ") > /dev/null
404 then
405 # Lazily switch to the target branch if needed...
406 test -z "$switch_to" || git checkout "$switch_to"
407 echo >&2 "Current branch $branch_name is up to date."
408 exit 0
411 if test -n "$verbose"
412 then
413 echo "Changes from $mb to $onto:"
414 # We want color (if set), but no pager
415 GIT_PAGER='' git diff --stat --summary "$mb" "$onto"
418 # Detach HEAD and reset the tree
419 echo "First, rewinding head to replay your work on top of it..."
420 git checkout -q "$onto^0" || die "could not detach HEAD"
421 git update-ref ORIG_HEAD $branch
423 # If the $onto is a proper descendant of the tip of the branch, then
424 # we just fast forwarded.
425 if test "$mb" = "$branch"
426 then
427 echo >&2 "Fast-forwarded $branch_name to $onto_name."
428 move_to_original_branch
429 exit 0
432 if test -z "$do_merge"
433 then
434 git format-patch -k --stdout --full-index --ignore-if-in-upstream \
435 "$upstream..$orig_head" |
436 git am $git_am_opt --rebasing --resolvemsg="$RESOLVEMSG" &&
437 move_to_original_branch
438 ret=$?
439 test 0 != $ret -a -d "$GIT_DIR"/rebase-apply &&
440 echo $head_name > "$GIT_DIR"/rebase-apply/head-name &&
441 echo $onto > "$GIT_DIR"/rebase-apply/onto &&
442 echo $orig_head > "$GIT_DIR"/rebase-apply/orig-head
443 exit $ret
446 # start doing a rebase with git-merge
447 # this is rename-aware if the recursive (default) strategy is used
449 mkdir -p "$dotest"
450 echo "$onto" > "$dotest/onto"
451 echo "$onto_name" > "$dotest/onto_name"
452 prev_head=$orig_head
453 echo "$prev_head" > "$dotest/prev_head"
454 echo "$orig_head" > "$dotest/orig-head"
455 echo "$head_name" > "$dotest/head-name"
457 msgnum=0
458 for cmt in `git rev-list --reverse --no-merges "$upstream..$orig_head"`
460 msgnum=$(($msgnum + 1))
461 echo "$cmt" > "$dotest/cmt.$msgnum"
462 done
464 echo 1 >"$dotest/msgnum"
465 echo $msgnum >"$dotest/end"
467 end=$msgnum
468 msgnum=1
470 while test "$msgnum" -le "$end"
472 call_merge "$msgnum"
473 continue_merge
474 done
476 finish_rb_merge