6 git-rev-parse - Pick out and massage parameters
12 'git rev-parse' [ --option ] <args>...
17 Many Git porcelainish commands take mixture of flags
18 (i.e. parameters that begin with a dash '-') and parameters
19 meant for the underlying 'git rev-list' command they use internally
20 and flags and parameters for the other commands they use
21 downstream of 'git rev-list'. This command is used to
22 distinguish between them.
31 Each of these options must appear first on the command line.
34 Use 'git rev-parse' in option parsing mode (see PARSEOPT section below).
37 Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE
38 section below). In contrast to the `--sq` option below, this
39 mode does only quoting. Nothing else is done to command input.
41 Options for --parseopt
42 ~~~~~~~~~~~~~~~~~~~~~~
45 Only meaningful in `--parseopt` mode. Tells the option parser to echo
46 out the first `--` met instead of skipping it.
48 --stop-at-non-option::
49 Only meaningful in `--parseopt` mode. Lets the option parser stop at
50 the first non-option argument. This can be used to parse sub-commands
51 that take options themselves.
54 Only meaningful in `--parseopt` mode. Output the options in their
55 long form if available, and with their arguments stuck.
61 Do not output flags and parameters not meant for
62 'git rev-list' command.
65 Do not output flags and parameters meant for
66 'git rev-list' command.
69 Do not output non-flag parameters.
72 Do not output flag parameters.
78 If there is no parameter given by the user, use `<arg>`
82 Behave as if 'git rev-parse' was invoked from the `<arg>`
83 subdirectory of the working tree. Any relative filenames are
84 resolved as if they are prefixed by `<arg>` and will be printed
87 This can be used to convert arguments to a command run in a subdirectory
88 so that they can still be used after moving to the top-level of the
89 repository. For example:
92 prefix=$(git rev-parse --show-prefix)
93 cd "$(git rev-parse --show-toplevel)"
94 eval "set -- $(git rev-parse --sq --prefix "$prefix" "$@")"
98 Verify that exactly one parameter is provided, and that it
99 can be turned into a raw 20-byte SHA-1 that can be used to
100 access the object database. If so, emit it to the standard
101 output; otherwise, error out.
103 If you want to make sure that the output actually names an object in
104 your object database and/or can be used as a specific type of object
105 you require, you can add "\^{type}" peeling operator to the parameter.
106 For example, `git rev-parse "$VAR^{commit}"` will make sure `$VAR`
107 names an existing object that is a commit-ish (i.e. a commit, or an
108 annotated tag that points at a commit). To make sure that `$VAR`
109 names an existing object of any type, `git rev-parse "$VAR^{object}"`
114 Only meaningful in `--verify` mode. Do not output an error
115 message if the first argument is not a valid object name;
116 instead exit with non-zero status silently.
119 Usually the output is made one line per flag and
120 parameter. This option makes output a single line,
121 properly quoted for consumption by shell. Useful when
122 you expect your parameter to contain whitespaces and
123 newlines (e.g. when using pickaxe `-S` with
124 'git diff-{asterisk}'). In contrast to the `--sq-quote` option,
125 the command input is still interpreted as usual.
128 When showing object names, prefix them with '{caret}' and
129 strip '{caret}' prefix from the object names that already have
132 --abbrev-ref[=(strict|loose)]::
133 A non-ambiguous short name of the objects name.
134 The option core.warnAmbiguousRefs is used to select the strict
139 Instead of outputting the full SHA-1 values of object names try to
140 abbreviate them to a shorter unique name. When no length is specified
141 7 is used. The minimum length is 4.
144 Usually the object names are output in SHA-1 form (with
145 possible '{caret}' prefix); this option makes them output in a
146 form as close to the original input as possible.
148 --symbolic-full-name::
149 This is similar to \--symbolic, but it omits input that
150 are not refs (i.e. branch or tag names; or more
151 explicitly disambiguating "heads/master" form, when you
152 want to name the "master" branch when there is an
153 unfortunately named tag "master"), and show them as full
154 refnames (e.g. "refs/heads/master").
160 Show all refs found in `refs/`.
162 --branches[=pattern]::
164 --remotes[=pattern]::
165 Show all branches, tags, or remote-tracking branches,
166 respectively (i.e., refs found in `refs/heads`,
167 `refs/tags`, or `refs/remotes`, respectively).
169 If a `pattern` is given, only refs matching the given shell glob are
170 shown. If the pattern does not contain a globbing character (`?`,
171 `*`, or `[`), it is turned into a prefix match by appending `/*`.
174 Show all refs matching the shell glob pattern `pattern`. If
175 the pattern does not start with `refs/`, this is automatically
176 prepended. If the pattern does not contain a globbing
177 character (`?`, `*`, or `[`), it is turned into a prefix
178 match by appending `/*`.
180 --exclude=<glob-pattern>::
181 Do not include refs matching '<glob-pattern>' that the next `--all`,
182 `--branches`, `--tags`, `--remotes`, or `--glob` would otherwise
183 consider. Repetitions of this option accumulate exclusion patterns
184 up to the next `--all`, `--branches`, `--tags`, `--remotes`, or
185 `--glob` option (other options or arguments do not clear
186 accumlated patterns).
188 The patterns given should not begin with `refs/heads`, `refs/tags`, or
189 `refs/remotes` when applied to `--branches`, `--tags`, or `--remotes`,
190 respectively, and they must begin with `refs/` when applied to `--glob`
191 or `--all`. If a trailing '/{asterisk}' is intended, it must be given
194 --disambiguate=<prefix>::
195 Show every object whose name begins with the given prefix.
196 The <prefix> must be at least 4 hexadecimal digits long to
197 avoid listing each and every object in the repository by
204 List the GIT_* environment variables that are local to the
205 repository (e.g. GIT_DIR or GIT_WORK_TREE, but not GIT_EDITOR).
206 Only the names of the variables are listed, not their value,
207 even if they are set.
210 Show `$GIT_DIR` if defined. Otherwise show the path to
211 the .git directory. The path shown, when relative, is
212 relative to the current working directory.
214 If `$GIT_DIR` is not defined and the current directory
215 is not detected to lie in a Git repository or work tree
216 print a message to stderr and exit with nonzero status.
219 Show `$GIT_COMMON_DIR` if defined, else `$GIT_DIR`.
221 --is-inside-git-dir::
222 When the current working directory is below the repository
223 directory print "true", otherwise "false".
225 --is-inside-work-tree::
226 When the current working directory is inside the work tree of the
227 repository print "true", otherwise "false".
229 --is-bare-repository::
230 When the repository is bare print "true", otherwise "false".
232 --resolve-git-dir <path>::
233 Check if <path> is a valid repository or a gitfile that
234 points at a valid repository, and print the location of the
235 repository. If <path> is a gitfile then the resolved path
236 to the real repository is printed.
239 Resolve "$GIT_DIR/<path>" and takes other path relocation
240 variables such as $GIT_OBJECT_DIRECTORY,
241 $GIT_INDEX_FILE... into account. For example, if
242 $GIT_OBJECT_DIRECTORY is set to /foo/bar then "git rev-parse
243 --git-path objects/abc" returns /foo/bar/abc.
246 When the command is invoked from a subdirectory, show the
247 path of the top-level directory relative to the current
248 directory (typically a sequence of "../", or an empty string).
251 When the command is invoked from a subdirectory, show the
252 path of the current directory relative to the top-level
256 Show the absolute path of the top-level directory.
258 --shared-index-path::
259 Show the path to the shared index file in split index mode, or
260 empty if not in split-index mode.
267 Parse the date string, and output the corresponding
268 --max-age= parameter for 'git rev-list'.
271 --before=datestring::
272 Parse the date string, and output the corresponding
273 --min-age= parameter for 'git rev-list'.
276 Flags and parameters to be parsed.
279 include::revisions.txt[]
284 In `--parseopt` mode, 'git rev-parse' helps massaging options to bring to shell
285 scripts the same facilities C builtins have. It works as an option normalizer
286 (e.g. splits single switches aggregate values), a bit like `getopt(1)` does.
288 It takes on the standard input the specification of the options to parse and
289 understand, and echoes on the standard output a string suitable for `sh(1)` `eval`
290 to replace the arguments with normalized ones. In case of error, it outputs
291 usage on the standard error stream, and exits with code 129.
293 Note: Make sure you quote the result when passing it to `eval`. See
294 below for an example.
299 'git rev-parse --parseopt' input format is fully text based. It has two parts,
300 separated by a line that contains only `--`. The lines before the separator
301 (should be one or more) are used for the usage.
302 The lines after the separator describe the options.
304 Each line of options has this format:
307 <opt-spec><flags>*<arg-hint>? SP+ help LF
311 its format is the short option character, then the long option name
312 separated by a comma. Both parts are not required, though at least one
313 is necessary. `h,help`, `dry-run` and `f` are all three correct
317 `<flags>` are of `*`, `=`, `?` or `!`.
318 * Use `=` if the option takes an argument.
320 * Use `?` to mean that the option takes an optional argument. You
321 probably want to use the `--stuck-long` mode to be able to
322 unambiguously parse the optional argument.
324 * Use `*` to mean that this option should not be listed in the usage
325 generated for the `-h` argument. It's shown for `--help-all` as
326 documented in linkgit:gitcli[7].
328 * Use `!` to not make the corresponding negated long option available.
331 `<arg-hint>`, if specified, is used as a name of the argument in the
332 help output, for options that take arguments. `<arg-hint>` is
333 terminated by the first whitespace. It is customary to use a
334 dash to separate words in a multi-word argument hint.
336 The remainder of the line, after stripping the spaces, is used
337 as the help associated to the option.
339 Blank lines are ignored, and lines that don't match this specification are used
340 as option group headers (start the line with a space to create such
348 some-command [options] <args>...
350 some-command does foo and bar!
354 foo some nifty option --foo
355 bar= some cool option --bar with an argument
356 baz=arg another cool option --baz with a named argument
357 qux?path qux may take a path argument but has meaning by itself
359 An option group Header
360 C? option C with an optional argument"
362 eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)"
369 When `"$@"` is `-h` or `--help` in the above example, the following
370 usage text would be shown:
373 usage: some-command [options] <args>...
375 some-command does foo and bar!
377 -h, --help show the help
378 --foo some nifty option --foo
379 --bar ... some cool option --bar with an argument
380 --baz <arg> another cool option --baz with a named argument
381 --qux[=<path>] qux may take a path argument but has meaning by itself
383 An option group Header
384 -C[...] option C with an optional argument
390 In `--sq-quote` mode, 'git rev-parse' echoes on the standard output a
391 single line suitable for `sh(1)` `eval`. This line is made by
392 normalizing the arguments following `--sq-quote`. Nothing other than
393 quoting the arguments is done.
395 If you want command input to still be interpreted as usual by
396 'git rev-parse' before the output is shell quoted, see the `--sq`
403 $ cat >your-git-script.sh <<\EOF
405 args=$(git rev-parse --sq-quote "$@") # quote user-supplied arguments
406 command="git frotz -n24 $args" # and use it inside a handcrafted
411 $ sh your-git-script.sh "a b'c"
417 * Print the object name of the current commit:
420 $ git rev-parse --verify HEAD
423 * Print the commit object name from the revision in the $REV shell variable:
426 $ git rev-parse --verify $REV^{commit}
429 This will error out if $REV is empty or not a valid revision.
434 $ git rev-parse --default master --verify $REV
437 but if $REV is empty, the commit object name from master will be printed.
441 Part of the linkgit:git[1] suite