t/test-lib.sh

   1 # Test framework for git.  See t/README for usage.
   2 #
   3 # Copyright (c) 2005 Junio C Hamano
   4 #
   5 # This program is free software: you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation, either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program.  If not, see http://www.gnu.org/licenses/ .
  17
  18 # Test the binaries we have just built.  The tests are kept in
  19 # t/ subdirectory and are run in 'trash directory' subdirectory.
  20 if test -z "$TEST_DIRECTORY"
  21 then
  22         # We allow tests to override this, in case they want to run tests
  23         # outside of t/, e.g. for running tests on the test library
  24         # itself.
  25         TEST_DIRECTORY=$(pwd)
  26 else
  27         # ensure that TEST_DIRECTORY is an absolute path so that it
  28         # is valid even if the current working directory is changed
  29         TEST_DIRECTORY=$(cd "$TEST_DIRECTORY" && pwd) || exit 1
  30 fi
  31 if test -z "$TEST_OUTPUT_DIRECTORY"
  32 then
  33         # Similarly, override this to store the test-results subdir
  34         # elsewhere
  35         TEST_OUTPUT_DIRECTORY=$TEST_DIRECTORY
  36 fi
  37 GIT_BUILD_DIR="$TEST_DIRECTORY"/..
  38
  39 ################################################################
  40 # It appears that people try to run tests without building...
  41 "$GIT_BUILD_DIR/git" >/dev/null
  42 if test $? != 1
  43 then
  44         echo >&2 'error: you do not seem to have built git yet.'
  45         exit 1
  46 fi
  47
  48 . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS
  49 export PERL_PATH SHELL_PATH
  50
  51 # if --tee was passed, write the output not only to the terminal, but
  52 # additionally to the file test-results/$BASENAME.out, too.
  53 case "$GIT_TEST_TEE_STARTED, $* " in
  54 done,*)
  55         # do not redirect again
  56         ;;
  57 *' --tee '*|*' --va'*)
  58         mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results"
  59         BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)"
  60         (GIT_TEST_TEE_STARTED=done ${SHELL_PATH} "$0" "$@" 2>&1;
  61          echo $? > $BASE.exit) | tee $BASE.out
  62         test "$(cat $BASE.exit)" = 0
  63         exit
  64         ;;
  65 esac
  66
  67 # For repeatability, reset the environment to known value.
  68 # TERM is sanitized below, after saving color control sequences.
  69 LANG=C
  70 LC_ALL=C
  71 PAGER=cat
  72 TZ=UTC
  73 export LANG LC_ALL PAGER TZ
  74 EDITOR=:
  75 # A call to "unset" with no arguments causes at least Solaris 10
  76 # /usr/xpg4/bin/sh and /bin/ksh to bail out.  So keep the unsets
  77 # deriving from the command substitution clustered with the other
  78 # ones.
  79 unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e '
  80         my @env = keys %ENV;
  81         my $ok = join("|", qw(
  82                 TRACE
  83                 DEBUG
  84                 USE_LOOKUP
  85                 TEST
  86                 .*_TEST
  87                 PROVE
  88                 VALGRIND
  89                 UNZIP
  90                 PERF_
  91                 CURL_VERBOSE
  92         ));
  93         my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env);
  94         print join("\n", @vars);
  95 ')
  96 unset XDG_CONFIG_HOME
  97 unset GITPERLLIB
  98 GIT_AUTHOR_EMAIL=author@example.com
  99 GIT_AUTHOR_NAME='A U Thor'
 100 GIT_COMMITTER_EMAIL=committer@example.com
 101 GIT_COMMITTER_NAME='C O Mitter'
 102 GIT_MERGE_VERBOSITY=5
 103 GIT_MERGE_AUTOEDIT=no
 104 export GIT_MERGE_VERBOSITY GIT_MERGE_AUTOEDIT
 105 export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME
 106 export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME
 107 export EDITOR
 108
 109 # Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output
 110 GIT_TRACE_BARE=1
 111 export GIT_TRACE_BARE
 112
 113 if test -n "${TEST_GIT_INDEX_VERSION:+isset}"
 114 then
 115         GIT_INDEX_VERSION="$TEST_GIT_INDEX_VERSION"
 116         export GIT_INDEX_VERSION
 117 fi
 118
 119 # Add libc MALLOC and MALLOC_PERTURB test
 120 # only if we are not executing the test with valgrind
 121 if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null ||
 122    test -n "$TEST_NO_MALLOC_CHECK"
 123 then
 124         setup_malloc_check () {
 125                 : nothing
 126         }
 127         teardown_malloc_check () {
 128                 : nothing
 129         }
 130 else
 131         setup_malloc_check () {
 132                 MALLOC_CHECK_=3 MALLOC_PERTURB_=165
 133                 export MALLOC_CHECK_ MALLOC_PERTURB_
 134         }
 135         teardown_malloc_check () {
 136                 unset MALLOC_CHECK_ MALLOC_PERTURB_
 137         }
 138 fi
 139
 140 : ${ASAN_OPTIONS=detect_leaks=0}
 141 export ASAN_OPTIONS
 142
 143 # Protect ourselves from common misconfiguration to export
 144 # CDPATH into the environment
 145 unset CDPATH
 146
 147 unset GREP_OPTIONS
 148 unset UNZIP
 149
 150 case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in
 151 1|2|true)
 152         GIT_TRACE=4
 153         ;;
 154 esac
 155
 156 # Convenience
 157 #
 158 # A regexp to match 5 and 40 hexdigits
 159 _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
 160 _x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05"
 161
 162 # Zero SHA-1
 163 _z40=0000000000000000000000000000000000000000
 164
 165 # Line feed
 166 LF='
 167 '
 168
 169 # UTF-8 ZERO WIDTH NON-JOINER, which HFS+ ignores
 170 # when case-folding filenames
 171 u200c=$(printf '\342\200\214')
 172
 173 export _x05 _x40 _z40 LF u200c
 174
 175 # Each test should start with something like this, after copyright notices:
 176 #
 177 # test_description='Description of this test...
 178 # This test checks if command xyzzy does the right thing...
 179 # '
 180 # . ./test-lib.sh
 181 test "x$TERM" != "xdumb" && (
 182                 test -t 1 &&
 183                 tput bold >/dev/null 2>&1 &&
 184                 tput setaf 1 >/dev/null 2>&1 &&
 185                 tput sgr0 >/dev/null 2>&1
 186         ) &&
 187         color=t
 188
 189 while test "$#" -ne 0
 190 do
 191         case "$1" in
 192         -d|--d|--de|--deb|--debu|--debug)
 193                 debug=t; shift ;;
 194         -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
 195                 immediate=t; shift ;;
 196         -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
 197                 GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;;
 198         -r)
 199                 shift; test "$#" -ne 0 || {
 200                         echo 'error: -r requires an argument' >&2;
 201                         exit 1;
 202                 }
 203                 run_list=$1; shift ;;
 204         --run=*)
 205                 run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;;
 206         -h|--h|--he|--hel|--help)
 207                 help=t; shift ;;
 208         -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
 209                 verbose=t; shift ;;
 210         --verbose-only=*)
 211                 verbose_only=$(expr "z$1" : 'z[^=]*=\(.*\)')
 212                 shift ;;
 213         -q|--q|--qu|--qui|--quie|--quiet)
 214                 # Ignore --quiet under a TAP::Harness. Saying how many tests
 215                 # passed without the ok/not ok details is always an error.
 216                 test -z "$HARNESS_ACTIVE" && quiet=t; shift ;;
 217         --with-dashes)
 218                 with_dashes=t; shift ;;
 219         --no-color)
 220                 color=; shift ;;
 221         --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
 222                 valgrind=memcheck
 223                 shift ;;
 224         --valgrind=*)
 225                 valgrind=$(expr "z$1" : 'z[^=]*=\(.*\)')
 226                 shift ;;
 227         --valgrind-only=*)
 228                 valgrind_only=$(expr "z$1" : 'z[^=]*=\(.*\)')
 229                 shift ;;
 230         --tee)
 231                 shift ;; # was handled already
 232         --root=*)
 233                 root=$(expr "z$1" : 'z[^=]*=\(.*\)')
 234                 shift ;;
 235         --chain-lint)
 236                 GIT_TEST_CHAIN_LINT=1
 237                 shift ;;
 238         --no-chain-lint)
 239                 GIT_TEST_CHAIN_LINT=0
 240                 shift ;;
 241         -x)
 242                 trace=t
 243                 verbose=t
 244                 shift ;;
 245         *)
 246                 echo "error: unknown test option '$1'" >&2; exit 1 ;;
 247         esac
 248 done
 249
 250 if test -n "$valgrind_only"
 251 then
 252         test -z "$valgrind" && valgrind=memcheck
 253         test -z "$verbose" && verbose_only="$valgrind_only"
 254 elif test -n "$valgrind"
 255 then
 256         verbose=t
 257 fi
 258
 259 if test -n "$color"
 260 then
 261         # Save the color control sequences now rather than run tput
 262         # each time say_color() is called.  This is done for two
 263         # reasons:
 264         #   * TERM will be changed to dumb
 265         #   * HOME will be changed to a temporary directory and tput
 266         #     might need to read ~/.terminfo from the original HOME
 267         #     directory to get the control sequences
 268         # Note:  This approach assumes the control sequences don't end
 269         # in a newline for any terminal of interest (command
 270         # substitutions strip trailing newlines).  Given that most
 271         # (all?) terminals in common use are related to ECMA-48, this
 272         # shouldn't be a problem.
 273         say_color_error=$(tput bold; tput setaf 1) # bold red
 274         say_color_skip=$(tput setaf 4) # blue
 275         say_color_warn=$(tput setaf 3) # brown/yellow
 276         say_color_pass=$(tput setaf 2) # green
 277         say_color_info=$(tput setaf 6) # cyan
 278         say_color_reset=$(tput sgr0)
 279         say_color_="" # no formatting for normal text
 280         say_color () {
 281                 test -z "$1" && test -n "$quiet" && return
 282                 eval "say_color_color=\$say_color_$1"
 283                 shift
 284                 printf "%s\\n" "$say_color_color$*$say_color_reset"
 285         }
 286 else
 287         say_color() {
 288                 test -z "$1" && test -n "$quiet" && return
 289                 shift
 290                 printf "%s\n" "$*"
 291         }
 292 fi
 293
 294 TERM=dumb
 295 export TERM
 296
 297 error () {
 298         say_color error "error: $*"
 299         GIT_EXIT_OK=t
 300         exit 1
 301 }
 302
 303 say () {
 304         say_color info "$*"
 305 }
 306
 307 test "${test_description}" != "" ||
 308 error "Test script did not set test_description."
 309
 310 if test "$help" = "t"
 311 then
 312         printf '%s\n' "$test_description"
 313         exit 0
 314 fi
 315
 316 exec 5>&1
 317 exec 6<&0
 318 if test "$verbose" = "t"
 319 then
 320         exec 4>&2 3>&1
 321 else
 322         exec 4>/dev/null 3>/dev/null
 323 fi
 324
 325 test_failure=0
 326 test_count=0
 327 test_fixed=0
 328 test_broken=0
 329 test_success=0
 330
 331 test_external_has_tap=0
 332
 333 die () {
 334         code=$?
 335         if test -n "$GIT_EXIT_OK"
 336         then
 337                 exit $code
 338         else
 339                 echo >&5 "FATAL: Unexpected exit with code $code"
 340                 exit 1
 341         fi
 342 }
 343
 344 GIT_EXIT_OK=
 345 trap 'die' EXIT
 346 trap 'exit $?' INT
 347
 348 # The user-facing functions are loaded from a separate file so that
 349 # test_perf subshells can have them too
 350 . "$TEST_DIRECTORY/test-lib-functions.sh"
 351
 352 # You are not expected to call test_ok_ and test_failure_ directly, use
 353 # the test_expect_* functions instead.
 354
 355 test_ok_ () {
 356         test_success=$(($test_success + 1))
 357         say_color "" "ok $test_count - $@"
 358 }
 359
 360 test_failure_ () {
 361         test_failure=$(($test_failure + 1))
 362         say_color error "not ok $test_count - $1"
 363         shift
 364         printf '%s\n' "$*" | sed -e 's/^/#      /'
 365         test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
 366 }
 367
 368 test_known_broken_ok_ () {
 369         test_fixed=$(($test_fixed+1))
 370         say_color error "ok $test_count - $@ # TODO known breakage vanished"
 371 }
 372
 373 test_known_broken_failure_ () {
 374         test_broken=$(($test_broken+1))
 375         say_color warn "not ok $test_count - $@ # TODO known breakage"
 376 }
 377
 378 test_debug () {
 379         test "$debug" = "" || eval "$1"
 380 }
 381
 382 match_pattern_list () {
 383         arg="$1"
 384         shift
 385         test -z "$*" && return 1
 386         for pattern_
 387         do
 388                 case "$arg" in
 389                 $pattern_)
 390                         return 0
 391                 esac
 392         done
 393         return 1
 394 }
 395
 396 match_test_selector_list () {
 397         title="$1"
 398         shift
 399         arg="$1"
 400         shift
 401         test -z "$1" && return 0
 402
 403         # Both commas and whitespace are accepted as separators.
 404         OLDIFS=$IFS
 405         IFS='   ,'
 406         set -- $1
 407         IFS=$OLDIFS
 408
 409         # If the first selector is negative we include by default.
 410         include=
 411         case "$1" in
 412                 !*) include=t ;;
 413         esac
 414
 415         for selector
 416         do
 417                 orig_selector=$selector
 418
 419                 positive=t
 420                 case "$selector" in
 421                         !*)
 422                                 positive=
 423                                 selector=${selector##?}
 424                                 ;;
 425                 esac
 426
 427                 test -z "$selector" && continue
 428
 429                 case "$selector" in
 430                         *-*)
 431                                 if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null
 432                                 then
 433                                         echo "error: $title: invalid non-numeric in range" \
 434                                                 "start: '$orig_selector'" >&2
 435                                         exit 1
 436                                 fi
 437                                 if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null
 438                                 then
 439                                         echo "error: $title: invalid non-numeric in range" \
 440                                                 "end: '$orig_selector'" >&2
 441                                         exit 1
 442                                 fi
 443                                 ;;
 444                         *)
 445                                 if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null
 446                                 then
 447                                         echo "error: $title: invalid non-numeric in test" \
 448                                                 "selector: '$orig_selector'" >&2
 449                                         exit 1
 450                                 fi
 451                 esac
 452
 453                 # Short cut for "obvious" cases
 454                 test -z "$include" && test -z "$positive" && continue
 455                 test -n "$include" && test -n "$positive" && continue
 456
 457                 case "$selector" in
 458                         -*)
 459                                 if test $arg -le ${selector#-}
 460                                 then
 461                                         include=$positive
 462                                 fi
 463                                 ;;
 464                         *-)
 465                                 if test $arg -ge ${selector%-}
 466                                 then
 467                                         include=$positive
 468                                 fi
 469                                 ;;
 470                         *-*)
 471                                 if test ${selector%%-*} -le $arg \
 472                                         && test $arg -le ${selector#*-}
 473                                 then
 474                                         include=$positive
 475                                 fi
 476                                 ;;
 477                         *)
 478                                 if test $arg -eq $selector
 479                                 then
 480                                         include=$positive
 481                                 fi
 482                                 ;;
 483                 esac
 484         done
 485
 486         test -n "$include"
 487 }
 488
 489 maybe_teardown_verbose () {
 490         test -z "$verbose_only" && return
 491         exec 4>/dev/null 3>/dev/null
 492         verbose=
 493 }
 494
 495 last_verbose=t
 496 maybe_setup_verbose () {
 497         test -z "$verbose_only" && return
 498         if match_pattern_list $test_count $verbose_only
 499         then
 500                 exec 4>&2 3>&1
 501                 # Emit a delimiting blank line when going from
 502                 # non-verbose to verbose.  Within verbose mode the
 503                 # delimiter is printed by test_expect_*.  The choice
 504                 # of the initial $last_verbose is such that before
 505                 # test 1, we do not print it.
 506                 test -z "$last_verbose" && echo >&3 ""
 507                 verbose=t
 508         else
 509                 exec 4>/dev/null 3>/dev/null
 510                 verbose=
 511         fi
 512         last_verbose=$verbose
 513 }
 514
 515 maybe_teardown_valgrind () {
 516         test -z "$GIT_VALGRIND" && return
 517         GIT_VALGRIND_ENABLED=
 518 }
 519
 520 maybe_setup_valgrind () {
 521         test -z "$GIT_VALGRIND" && return
 522         if test -z "$valgrind_only"
 523         then
 524                 GIT_VALGRIND_ENABLED=t
 525                 return
 526         fi
 527         GIT_VALGRIND_ENABLED=
 528         if match_pattern_list $test_count $valgrind_only
 529         then
 530                 GIT_VALGRIND_ENABLED=t
 531         fi
 532 }
 533
 534 # This is a separate function because some tests use
 535 # "return" to end a test_expect_success block early
 536 # (and we want to make sure we run any cleanup like
 537 # "set +x").
 538 test_eval_inner_ () {
 539         # Do not add anything extra (including LF) after '$*'
 540         eval "
 541                 test \"$trace\" = t && set -x
 542                 $*"
 543 }
 544
 545 test_eval_ () {
 546         # We run this block with stderr redirected to avoid extra cruft
 547         # during a "-x" trace. Once in "set -x" mode, we cannot prevent
 548         # the shell from printing the "set +x" to turn it off (nor the saving
 549         # of $? before that). But we can make sure that the output goes to
 550         # /dev/null.
 551         #
 552         # The test itself is run with stderr put back to &4 (so either to
 553         # /dev/null, or to the original stderr if --verbose was used).
 554         {
 555                 test_eval_inner_ "$@" </dev/null >&3 2>&4
 556                 test_eval_ret_=$?
 557                 if test "$trace" = t
 558                 then
 559                         set +x
 560                         if test "$test_eval_ret_" != 0
 561                         then
 562                                 say_color error >&4 "error: last command exited with \$?=$test_eval_ret_"
 563                         fi
 564                 fi
 565         } 2>/dev/null
 566         return $test_eval_ret_
 567 }
 568
 569 test_run_ () {
 570         test_cleanup=:
 571         expecting_failure=$2
 572
 573         if test "${GIT_TEST_CHAIN_LINT:-0}" != 0; then
 574                 # 117 is magic because it is unlikely to match the exit
 575                 # code of other programs
 576                 test_eval_ "(exit 117) && $1"
 577                 if test "$?" != 117; then
 578                         error "bug in the test script: broken &&-chain: $1"
 579                 fi
 580         fi
 581
 582         setup_malloc_check
 583         test_eval_ "$1"
 584         eval_ret=$?
 585         teardown_malloc_check
 586
 587         if test -z "$immediate" || test $eval_ret = 0 ||
 588            test -n "$expecting_failure" && test "$test_cleanup" != ":"
 589         then
 590                 setup_malloc_check
 591                 test_eval_ "$test_cleanup"
 592                 teardown_malloc_check
 593         fi
 594         if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"
 595         then
 596                 echo ""
 597         fi
 598         return "$eval_ret"
 599 }
 600
 601 test_start_ () {
 602         test_count=$(($test_count+1))
 603         maybe_setup_verbose
 604         maybe_setup_valgrind
 605 }
 606
 607 test_finish_ () {
 608         echo >&3 ""
 609         maybe_teardown_valgrind
 610         maybe_teardown_verbose
 611 }
 612
 613 test_skip () {
 614         to_skip=
 615         skipped_reason=
 616         if match_pattern_list $this_test.$test_count $GIT_SKIP_TESTS
 617         then
 618                 to_skip=t
 619                 skipped_reason="GIT_SKIP_TESTS"
 620         fi
 621         if test -z "$to_skip" && test -n "$test_prereq" &&
 622            ! test_have_prereq "$test_prereq"
 623         then
 624                 to_skip=t
 625
 626                 of_prereq=
 627                 if test "$missing_prereq" != "$test_prereq"
 628                 then
 629                         of_prereq=" of $test_prereq"
 630                 fi
 631                 skipped_reason="missing $missing_prereq${of_prereq}"
 632         fi
 633         if test -z "$to_skip" && test -n "$run_list" &&
 634                 ! match_test_selector_list '--run' $test_count "$run_list"
 635         then
 636                 to_skip=t
 637                 skipped_reason="--run"
 638         fi
 639
 640         case "$to_skip" in
 641         t)
 642                 say_color skip >&3 "skipping test: $@"
 643                 say_color skip "ok $test_count # skip $1 ($skipped_reason)"
 644                 : true
 645                 ;;
 646         *)
 647                 false
 648                 ;;
 649         esac
 650 }
 651
 652 # stub; perf-lib overrides it
 653 test_at_end_hook_ () {
 654         :
 655 }
 656
 657 test_done () {
 658         GIT_EXIT_OK=t
 659
 660         if test -z "$HARNESS_ACTIVE"
 661         then
 662                 test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results"
 663                 mkdir -p "$test_results_dir"
 664                 base=${0##*/}
 665                 test_results_path="$test_results_dir/${base%.sh}-$$.counts"
 666
 667                 cat >>"$test_results_path" <<-EOF
 668                 total $test_count
 669                 success $test_success
 670                 fixed $test_fixed
 671                 broken $test_broken
 672                 failed $test_failure
 673
 674                 EOF
 675         fi
 676
 677         if test "$test_fixed" != 0
 678         then
 679                 say_color error "# $test_fixed known breakage(s) vanished; please update test(s)"
 680         fi
 681         if test "$test_broken" != 0
 682         then
 683                 say_color warn "# still have $test_broken known breakage(s)"
 684         fi
 685         if test "$test_broken" != 0 || test "$test_fixed" != 0
 686         then
 687                 test_remaining=$(( $test_count - $test_broken - $test_fixed ))
 688                 msg="remaining $test_remaining test(s)"
 689         else
 690                 test_remaining=$test_count
 691                 msg="$test_count test(s)"
 692         fi
 693         case "$test_failure" in
 694         0)
 695                 # Maybe print SKIP message
 696                 if test -n "$skip_all" && test $test_count -gt 0
 697                 then
 698                         error "Can't use skip_all after running some tests"
 699                 fi
 700                 test -z "$skip_all" || skip_all=" # SKIP $skip_all"
 701
 702                 if test $test_external_has_tap -eq 0
 703                 then
 704                         if test $test_remaining -gt 0
 705                         then
 706                                 say_color pass "# passed all $msg"
 707                         fi
 708                         say "1..$test_count$skip_all"
 709                 fi
 710
 711                 test -d "$remove_trash" &&
 712                 cd "$(dirname "$remove_trash")" &&
 713                 rm -rf "$(basename "$remove_trash")"
 714
 715                 test_at_end_hook_
 716
 717                 exit 0 ;;
 718
 719         *)
 720                 if test $test_external_has_tap -eq 0
 721                 then
 722                         say_color error "# failed $test_failure among $msg"
 723                         say "1..$test_count"
 724                 fi
 725
 726                 exit 1 ;;
 727
 728         esac
 729 }
 730
 731 if test -n "$valgrind"
 732 then
 733         make_symlink () {
 734                 test -h "$2" &&
 735                 test "$1" = "$(readlink "$2")" || {
 736                         # be super paranoid
 737                         if mkdir "$2".lock
 738                         then
 739                                 rm -f "$2" &&
 740                                 ln -s "$1" "$2" &&
 741                                 rm -r "$2".lock
 742                         else
 743                                 while test -d "$2".lock
 744                                 do
 745                                         say "Waiting for lock on $2."
 746                                         sleep 1
 747                                 done
 748                         fi
 749                 }
 750         }
 751
 752         make_valgrind_symlink () {
 753                 # handle only executables, unless they are shell libraries that
 754                 # need to be in the exec-path.
 755                 test -x "$1" ||
 756                 test "# " = "$(head -c 2 <"$1")" ||
 757                 return;
 758
 759                 base=$(basename "$1")
 760                 symlink_target=$GIT_BUILD_DIR/$base
 761                 # do not override scripts
 762                 if test -x "$symlink_target" &&
 763                     test ! -d "$symlink_target" &&
 764                     test "#!" != "$(head -c 2 < "$symlink_target")"
 765                 then
 766                         symlink_target=../valgrind.sh
 767                 fi
 768                 case "$base" in
 769                 *.sh|*.perl)
 770                         symlink_target=../unprocessed-script
 771                 esac
 772                 # create the link, or replace it if it is out of date
 773                 make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit
 774         }
 775
 776         # override all git executables in TEST_DIRECTORY/..
 777         GIT_VALGRIND=$TEST_DIRECTORY/valgrind
 778         mkdir -p "$GIT_VALGRIND"/bin
 779         for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/test-*
 780         do
 781                 make_valgrind_symlink $file
 782         done
 783         # special-case the mergetools loadables
 784         make_symlink "$GIT_BUILD_DIR"/mergetools "$GIT_VALGRIND/bin/mergetools"
 785         OLDIFS=$IFS
 786         IFS=:
 787         for path in $PATH
 788         do
 789                 ls "$path"/git-* 2> /dev/null |
 790                 while read file
 791                 do
 792                         make_valgrind_symlink "$file"
 793                 done
 794         done
 795         IFS=$OLDIFS
 796         PATH=$GIT_VALGRIND/bin:$PATH
 797         GIT_EXEC_PATH=$GIT_VALGRIND/bin
 798         export GIT_VALGRIND
 799         GIT_VALGRIND_MODE="$valgrind"
 800         export GIT_VALGRIND_MODE
 801         GIT_VALGRIND_ENABLED=t
 802         test -n "$valgrind_only" && GIT_VALGRIND_ENABLED=
 803         export GIT_VALGRIND_ENABLED
 804 elif test -n "$GIT_TEST_INSTALLED"
 805 then
 806         GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path)  ||
 807         error "Cannot run git from $GIT_TEST_INSTALLED."
 808         PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR:$PATH
 809         GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH}
 810 else # normal case, use ../bin-wrappers only unless $with_dashes:
 811         git_bin_dir="$GIT_BUILD_DIR/bin-wrappers"
 812         if ! test -x "$git_bin_dir/git"
 813         then
 814                 if test -z "$with_dashes"
 815                 then
 816                         say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH"
 817                 fi
 818                 with_dashes=t
 819         fi
 820         PATH="$git_bin_dir:$PATH"
 821         GIT_EXEC_PATH=$GIT_BUILD_DIR
 822         if test -n "$with_dashes"
 823         then
 824                 PATH="$GIT_BUILD_DIR:$PATH"
 825         fi
 826 fi
 827 GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt
 828 GIT_CONFIG_NOSYSTEM=1
 829 GIT_ATTR_NOSYSTEM=1
 830 export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM
 831
 832 if test -z "$GIT_TEST_CMP"
 833 then
 834         if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT"
 835         then
 836                 GIT_TEST_CMP="$DIFF -c"
 837         else
 838                 GIT_TEST_CMP="$DIFF -u"
 839         fi
 840 fi
 841
 842 GITPERLLIB="$GIT_BUILD_DIR"/perl/blib/lib:"$GIT_BUILD_DIR"/perl/blib/arch/auto/Git
 843 export GITPERLLIB
 844 test -d "$GIT_BUILD_DIR"/templates/blt || {
 845         error "You haven't built things yet, have you?"
 846 }
 847
 848 if ! test -x "$GIT_BUILD_DIR"/test-chmtime
 849 then
 850         echo >&2 'You need to build test-chmtime:'
 851         echo >&2 'Run "make test-chmtime" in the source (toplevel) directory'
 852         exit 1
 853 fi
 854
 855 # Test repository
 856 TRASH_DIRECTORY="trash directory.$(basename "$0" .sh)"
 857 test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY"
 858 case "$TRASH_DIRECTORY" in
 859 /*) ;; # absolute path is good
 860  *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;;
 861 esac
 862 test ! -z "$debug" || remove_trash=$TRASH_DIRECTORY
 863 rm -fr "$TRASH_DIRECTORY" || {
 864         GIT_EXIT_OK=t
 865         echo >&5 "FATAL: Cannot prepare test area"
 866         exit 1
 867 }
 868
 869 HOME="$TRASH_DIRECTORY"
 870 GNUPGHOME="$HOME/gnupg-home-not-used"
 871 export HOME GNUPGHOME
 872
 873 if test -z "$TEST_NO_CREATE_REPO"
 874 then
 875         test_create_repo "$TRASH_DIRECTORY"
 876 else
 877         mkdir -p "$TRASH_DIRECTORY"
 878 fi
 879 # Use -P to resolve symlinks in our working directory so that the cwd
 880 # in subprocesses like git equals our $PWD (for pathname comparisons).
 881 cd -P "$TRASH_DIRECTORY" || exit 1
 882
 883 this_test=${0##*/}
 884 this_test=${this_test%%-*}
 885 if match_pattern_list "$this_test" $GIT_SKIP_TESTS
 886 then
 887         say_color info >&3 "skipping test $this_test altogether"
 888         skip_all="skip all tests in $this_test"
 889         test_done
 890 fi
 891
 892 # Provide an implementation of the 'yes' utility
 893 yes () {
 894         if test $# = 0
 895         then
 896                 y=y
 897         else
 898                 y="$*"
 899         fi
 900
 901         while echo "$y"
 902         do
 903                 :
 904         done
 905 }
 906
 907 # Fix some commands on Windows
 908 case $(uname -s) in
 909 *MINGW*)
 910         # Windows has its own (incompatible) sort and find
 911         sort () {
 912                 /usr/bin/sort "$@"
 913         }
 914         find () {
 915                 /usr/bin/find "$@"
 916         }
 917         sum () {
 918                 md5sum "$@"
 919         }
 920         # git sees Windows-style pwd
 921         pwd () {
 922                 builtin pwd -W
 923         }
 924         # no POSIX permissions
 925         # backslashes in pathspec are converted to '/'
 926         # exec does not inherit the PID
 927         test_set_prereq MINGW
 928         test_set_prereq NATIVE_CRLF
 929         test_set_prereq SED_STRIPS_CR
 930         test_set_prereq GREP_STRIPS_CR
 931         GIT_TEST_CMP=mingw_test_cmp
 932         ;;
 933 *CYGWIN*)
 934         test_set_prereq POSIXPERM
 935         test_set_prereq EXECKEEPSPID
 936         test_set_prereq CYGWIN
 937         test_set_prereq SED_STRIPS_CR
 938         test_set_prereq GREP_STRIPS_CR
 939         ;;
 940 *)
 941         test_set_prereq POSIXPERM
 942         test_set_prereq BSLASHPSPEC
 943         test_set_prereq EXECKEEPSPID
 944         ;;
 945 esac
 946
 947 ( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1
 948 test -z "$NO_PERL" && test_set_prereq PERL
 949 test -z "$NO_PYTHON" && test_set_prereq PYTHON
 950 test -n "$USE_LIBPCRE" && test_set_prereq LIBPCRE
 951 test -z "$NO_GETTEXT" && test_set_prereq GETTEXT
 952
 953 # Can we rely on git's output in the C locale?
 954 if test -n "$GETTEXT_POISON"
 955 then
 956         GIT_GETTEXT_POISON=YesPlease
 957         export GIT_GETTEXT_POISON
 958         test_set_prereq GETTEXT_POISON
 959 else
 960         test_set_prereq C_LOCALE_OUTPUT
 961 fi
 962
 963 # Use this instead of test_cmp to compare files that contain expected and
 964 # actual output from git commands that can be translated.  When running
 965 # under GETTEXT_POISON this pretends that the command produced expected
 966 # results.
 967 test_i18ncmp () {
 968         test -n "$GETTEXT_POISON" || test_cmp "$@"
 969 }
 970
 971 # Use this instead of "grep expected-string actual" to see if the
 972 # output from a git command that can be translated either contains an
 973 # expected string, or does not contain an unwanted one.  When running
 974 # under GETTEXT_POISON this pretends that the command produced expected
 975 # results.
 976 test_i18ngrep () {
 977         if test -n "$GETTEXT_POISON"
 978         then
 979             : # pretend success
 980         elif test "x!" = "x$1"
 981         then
 982                 shift
 983                 ! grep "$@"
 984         else
 985                 grep "$@"
 986         fi
 987 }
 988
 989 test_lazy_prereq PIPE '
 990         # test whether the filesystem supports FIFOs
 991         case $(uname -s) in
 992         CYGWIN*)
 993                 false
 994                 ;;
 995         *)
 996                 rm -f testfifo && mkfifo testfifo
 997                 ;;
 998         esac
 999 '
1000
1001 test_lazy_prereq SYMLINKS '
1002         # test whether the filesystem supports symbolic links
1003         ln -s x y && test -h y
1004 '
1005
1006 test_lazy_prereq FILEMODE '
1007         test "$(git config --bool core.filemode)" = true
1008 '
1009
1010 test_lazy_prereq CASE_INSENSITIVE_FS '
1011         echo good >CamelCase &&
1012         echo bad >camelcase &&
1013         test "$(cat CamelCase)" != good
1014 '
1015
1016 test_lazy_prereq UTF8_NFD_TO_NFC '
1017         # check whether FS converts nfd unicode to nfc
1018         auml=$(printf "\303\244")
1019         aumlcdiar=$(printf "\141\314\210")
1020         >"$auml" &&
1021         case "$(echo *)" in
1022         "$aumlcdiar")
1023                 true ;;
1024         *)
1025                 false ;;
1026         esac
1027 '
1028
1029 test_lazy_prereq AUTOIDENT '
1030         sane_unset GIT_AUTHOR_NAME &&
1031         sane_unset GIT_AUTHOR_EMAIL &&
1032         git var GIT_AUTHOR_IDENT
1033 '
1034
1035 test_lazy_prereq EXPENSIVE '
1036         test -n "$GIT_TEST_LONG"
1037 '
1038
1039 test_lazy_prereq USR_BIN_TIME '
1040         test -x /usr/bin/time
1041 '
1042
1043 test_lazy_prereq NOT_ROOT '
1044         uid=$(id -u) &&
1045         test "$uid" != 0
1046 '
1047
1048 # On a filesystem that lacks SANITY, a file can be deleted even if
1049 # the containing directory doesn't have write permissions, or a file
1050 # can be accessed even if the containing directory doesn't have read
1051 # or execute permissions, causing our tests that validate that Git
1052 # works sensibly in such situations.
1053 test_lazy_prereq SANITY '
1054         mkdir SANETESTD.1 SANETESTD.2 &&
1055
1056         chmod +w SANETESTD.1 SANETESTD.2 &&
1057         >SANETESTD.1/x 2>SANETESTD.2/x &&
1058         chmod -w SANETESTD.1 &&
1059         chmod -rx SANETESTD.2 ||
1060         error "bug in test sript: cannot prepare SANETESTD"
1061
1062         ! rm SANETESTD.1/x && ! test -f SANETESTD.2/x
1063         status=$?
1064
1065         chmod +rwx SANETESTD.1 SANETESTD.2 &&
1066         rm -rf SANETESTD.1 SANETESTD.2 ||
1067         error "bug in test sript: cannot clean SANETESTD"
1068         return $status
1069 '
1070
1071 GIT_UNZIP=${GIT_UNZIP:-unzip}
1072 test_lazy_prereq UNZIP '
1073         "$GIT_UNZIP" -v
1074         test $? -ne 127
1075 '
1076
1077 run_with_limited_cmdline () {
1078         (ulimit -s 128 && "$@")
1079 }
1080
1081 test_lazy_prereq CMDLINE_LIMIT 'run_with_limited_cmdline true'