t/lib-submodule-update.sh

   1 # Create a submodule layout used for all tests below.
   2 #
   3 # The following use cases are covered:
   4 # - New submodule (no_submodule => add_sub1)
   5 # - Removed submodule (add_sub1 => remove_sub1)
   6 # - Updated submodule (add_sub1 => modify_sub1)
   7 # - Updated submodule recursively (add_nested_sub => modify_sub1_recursively)
   8 # - Submodule updated to invalid commit (add_sub1 => invalid_sub1)
   9 # - Submodule updated from invalid commit (invalid_sub1 => valid_sub1)
  10 # - Submodule replaced by tracked files in directory (add_sub1 =>
  11 #   replace_sub1_with_directory)
  12 # - Directory containing tracked files replaced by submodule
  13 #   (replace_sub1_with_directory => replace_directory_with_sub1)
  14 # - Submodule replaced by tracked file with the same name (add_sub1 =>
  15 #   replace_sub1_with_file)
  16 # - Tracked file replaced by submodule (replace_sub1_with_file =>
  17 #   replace_file_with_sub1)
  18 #
  19 #                     ----O
  20 #                    /    ^
  21 #                   /     remove_sub1
  22 #                  /
  23 #       add_sub1  /-------O---------O--------O  modify_sub1_recursively
  24 #             |  /        ^         add_nested_sub
  25 #             | /         modify_sub1
  26 #             v/
  27 #      O------O-----------O---------O
  28 #      ^       \          ^         replace_directory_with_sub1
  29 #      |        \         replace_sub1_with_directory
  30 # no_submodule   \
  31 #                 --------O---------O
  32 #                  \      ^         replace_file_with_sub1
  33 #                   \     replace_sub1_with_file
  34 #                    \
  35 #                     ----O---------O
  36 #                         ^         valid_sub1
  37 #                         invalid_sub1
  38 #
  39
  40 create_lib_submodule_repo () {
  41         git init submodule_update_sub1 &&
  42         (
  43                 cd submodule_update_sub1 &&
  44                 echo "expect" >>.gitignore &&
  45                 echo "actual" >>.gitignore &&
  46                 echo "x" >file1 &&
  47                 echo "y" >file2 &&
  48                 git add .gitignore file1 file2 &&
  49                 git commit -m "Base inside first submodule" &&
  50                 git branch "no_submodule"
  51         ) &&
  52         git init submodule_update_sub2 &&
  53         (
  54                 cd submodule_update_sub2
  55                 echo "expect" >>.gitignore &&
  56                 echo "actual" >>.gitignore &&
  57                 echo "x" >file1 &&
  58                 echo "y" >file2 &&
  59                 git add .gitignore file1 file2 &&
  60                 git commit -m "nested submodule base" &&
  61                 git branch "no_submodule"
  62         ) &&
  63         git init submodule_update_repo &&
  64         (
  65                 cd submodule_update_repo &&
  66                 echo "expect" >>.gitignore &&
  67                 echo "actual" >>.gitignore &&
  68                 echo "x" >file1 &&
  69                 echo "y" >file2 &&
  70                 git add .gitignore file1 file2 &&
  71                 git commit -m "Base" &&
  72                 git branch "no_submodule" &&
  73
  74                 git checkout -b "add_sub1" &&
  75                 git submodule add ../submodule_update_sub1 sub1 &&
  76                 git submodule add ../submodule_update_sub1 uninitialized_sub &&
  77                 git config -f .gitmodules submodule.sub1.ignore all &&
  78                 git config submodule.sub1.ignore all &&
  79                 git add .gitmodules &&
  80                 git commit -m "Add sub1" &&
  81
  82                 git checkout -b remove_sub1 add_sub1 &&
  83                 git revert HEAD &&
  84
  85                 git checkout -b modify_sub1 add_sub1 &&
  86                 git submodule update &&
  87                 (
  88                         cd sub1 &&
  89                         git fetch &&
  90                         git checkout -b "modifications" &&
  91                         echo "z" >file2 &&
  92                         echo "x" >file3 &&
  93                         git add file2 file3 &&
  94                         git commit -m "modified file2 and added file3" &&
  95                         git push origin modifications
  96                 ) &&
  97                 git add sub1 &&
  98                 git commit -m "Modify sub1" &&
  99
 100                 git checkout -b add_nested_sub modify_sub1 &&
 101                 git -C sub1 checkout -b "add_nested_sub" &&
 102                 git -C sub1 submodule add --branch no_submodule ../submodule_update_sub2 sub2 &&
 103                 git -C sub1 commit -a -m "add a nested submodule" &&
 104                 git add sub1 &&
 105                 git commit -a -m "update submodule, that updates a nested submodule" &&
 106                 git checkout -b modify_sub1_recursively &&
 107                 git -C sub1 checkout -b modify_sub1_recursively &&
 108                 git -C sub1/sub2 checkout -b modify_sub1_recursively &&
 109                 echo change >sub1/sub2/file3 &&
 110                 git -C sub1/sub2 add file3 &&
 111                 git -C sub1/sub2 commit -m "make a change in nested sub" &&
 112                 git -C sub1 add sub2 &&
 113                 git -C sub1 commit -m "update nested sub" &&
 114                 git add sub1 &&
 115                 git commit -m "update sub1, that updates nested sub" &&
 116                 git -C sub1 push origin modify_sub1_recursively &&
 117                 git -C sub1/sub2 push origin modify_sub1_recursively &&
 118                 git -C sub1 submodule deinit -f --all &&
 119
 120                 git checkout -b replace_sub1_with_directory add_sub1 &&
 121                 git submodule update &&
 122                 git -C sub1 checkout modifications &&
 123                 git rm --cached sub1 &&
 124                 rm sub1/.git* &&
 125                 git config -f .gitmodules --remove-section "submodule.sub1" &&
 126                 git add .gitmodules sub1/* &&
 127                 git commit -m "Replace sub1 with directory" &&
 128
 129                 git checkout -b replace_directory_with_sub1 &&
 130                 git revert HEAD &&
 131
 132                 git checkout -b replace_sub1_with_file add_sub1 &&
 133                 git rm sub1 &&
 134                 echo "content" >sub1 &&
 135                 git add sub1 &&
 136                 git commit -m "Replace sub1 with file" &&
 137
 138                 git checkout -b replace_file_with_sub1 &&
 139                 git revert HEAD &&
 140
 141                 git checkout -b invalid_sub1 add_sub1 &&
 142                 git update-index --cacheinfo 160000 0123456789012345678901234567890123456789 sub1 &&
 143                 git commit -m "Invalid sub1 commit" &&
 144                 git checkout -b valid_sub1 &&
 145                 git revert HEAD &&
 146
 147                 git checkout master
 148         )
 149 }
 150
 151 # Helper function to replace gitfile with .git directory
 152 replace_gitfile_with_git_dir () {
 153         (
 154                 cd "$1" &&
 155                 git_dir="$(git rev-parse --git-dir)" &&
 156                 rm -f .git &&
 157                 cp -R "$git_dir" .git &&
 158                 GIT_WORK_TREE=. git config --unset core.worktree
 159         )
 160 }
 161
 162 # Test that the .git directory in the submodule is unchanged (except for the
 163 # core.worktree setting, which appears only in $GIT_DIR/modules/$1/config).
 164 # Call this function before test_submodule_content as the latter might
 165 # write the index file leading to false positive index differences.
 166 #
 167 # Note that this only supports submodules at the root level of the
 168 # superproject, with the default name, i.e. same as its path.
 169 test_git_directory_is_unchanged () {
 170         (
 171                 cd ".git/modules/$1" &&
 172                 # does core.worktree point at the right place?
 173                 test "$(git config core.worktree)" = "../../../$1" &&
 174                 # remove it temporarily before comparing, as
 175                 # "$1/.git/config" lacks it...
 176                 git config --unset core.worktree
 177         ) &&
 178         diff -r ".git/modules/$1" "$1/.git" &&
 179         (
 180                 # ... and then restore.
 181                 cd ".git/modules/$1" &&
 182                 git config core.worktree "../../../$1"
 183         )
 184 }
 185
 186 test_git_directory_exists() {
 187         test -e ".git/modules/$1" &&
 188         if test -f sub1/.git
 189         then
 190                 # does core.worktree point at the right place?
 191                 test "$(git -C .git/modules/$1 config core.worktree)" = "../../../$1"
 192         fi
 193 }
 194
 195 # Helper function to be executed at the start of every test below, it sets up
 196 # the submodule repo if it doesn't exist and configures the most problematic
 197 # settings for diff.ignoreSubmodules.
 198 prolog () {
 199         (test -d submodule_update_repo || create_lib_submodule_repo) &&
 200         test_config_global diff.ignoreSubmodules all &&
 201         test_config diff.ignoreSubmodules all
 202 }
 203
 204 # Helper function to bring work tree back into the state given by the
 205 # commit. This includes trying to populate sub1 accordingly if it exists and
 206 # should be updated to an existing commit.
 207 reset_work_tree_to () {
 208         rm -rf submodule_update &&
 209         git clone submodule_update_repo submodule_update &&
 210         (
 211                 cd submodule_update &&
 212                 rm -rf sub1 &&
 213                 git checkout -f "$1" &&
 214                 git status -u -s >actual &&
 215                 test_must_be_empty actual &&
 216                 hash=$(git rev-parse --revs-only HEAD:sub1) &&
 217                 if test -n "$hash" &&
 218                    test $(cd "../submodule_update_sub1" && git rev-parse --verify "$hash^{commit}")
 219                 then
 220                         git submodule update --init --recursive "sub1"
 221                 fi
 222         )
 223 }
 224
 225 reset_work_tree_to_interested () {
 226         reset_work_tree_to $1 &&
 227         # make the submodule git dirs available
 228         if ! test -d submodule_update/.git/modules/sub1
 229         then
 230                 mkdir -p submodule_update/.git/modules &&
 231                 cp -r submodule_update_repo/.git/modules/sub1 submodule_update/.git/modules/sub1
 232                 GIT_WORK_TREE=. git -C submodule_update/.git/modules/sub1 config --unset core.worktree
 233         fi &&
 234         if ! test -d submodule_update/.git/modules/sub1/modules/sub2
 235         then
 236                 mkdir -p submodule_update/.git/modules/sub1/modules &&
 237                 cp -r submodule_update_repo/.git/modules/sub1/modules/sub2 submodule_update/.git/modules/sub1/modules/sub2
 238                 GIT_WORK_TREE=. git -C submodule_update/.git/modules/sub1/modules/sub2 config --unset core.worktree
 239         fi &&
 240         # indicate we are interested in the submodule:
 241         git -C submodule_update config submodule.sub1.url "bogus" &&
 242         # sub1 might not be checked out, so use the git dir
 243         git -C submodule_update/.git/modules/sub1 config submodule.sub2.url "bogus"
 244 }
 245
 246 # Test that the superproject contains the content according to commit "$1"
 247 # (the work tree must match the index for everything but submodules but the
 248 # index must exactly match the given commit including any submodule SHA-1s).
 249 test_superproject_content () {
 250         git diff-index --cached "$1" >actual &&
 251         test_must_be_empty actual &&
 252         git diff-files --ignore-submodules >actual &&
 253         test_must_be_empty actual
 254 }
 255
 256 # Test that the given submodule at path "$1" contains the content according
 257 # to the submodule commit recorded in the superproject's commit "$2"
 258 test_submodule_content () {
 259         if test x"$1" = "x-C"
 260         then
 261                 cd "$2"
 262                 shift; shift;
 263         fi
 264         if test $# != 2
 265         then
 266                 echo "test_submodule_content needs two arguments"
 267                 return 1
 268         fi &&
 269         submodule="$1" &&
 270         commit="$2" &&
 271         test -d "$submodule"/ &&
 272         if ! test -f "$submodule"/.git && ! test -d "$submodule"/.git
 273         then
 274                 echo "Submodule $submodule is not populated"
 275                 return 1
 276         fi &&
 277         sha1=$(git rev-parse --verify "$commit:$submodule") &&
 278         if test -z "$sha1"
 279         then
 280                 echo "Couldn't retrieve SHA-1 of $submodule for $commit"
 281                 return 1
 282         fi &&
 283         (
 284                 cd "$submodule" &&
 285                 git status -u -s >actual &&
 286                 test_must_be_empty actual &&
 287                 git diff "$sha1" >actual &&
 288                 test_must_be_empty actual
 289         )
 290 }
 291
 292 # Test that the following transitions are correctly handled:
 293 # - Updated submodule
 294 # - New submodule
 295 # - Removed submodule
 296 # - Directory containing tracked files replaced by submodule
 297 # - Submodule replaced by tracked files in directory
 298 # - Submodule replaced by tracked file with the same name
 299 # - tracked file replaced by submodule
 300 #
 301 # The default is that submodule contents aren't changed until "git submodule
 302 # update" is run. And even then that command doesn't delete the work tree of
 303 # a removed submodule.
 304 #
 305 # Removing a submodule containing a .git directory must fail even when forced
 306 # to protect the history!
 307 #
 308
 309 # Test that submodule contents are currently not updated when switching
 310 # between commits that change a submodule.
 311 test_submodule_switch () {
 312         command="$1"
 313         ######################### Appearing submodule #########################
 314         # Switching to a commit letting a submodule appear creates empty dir ...
 315         if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1
 316         then
 317                 # Restoring stash fails to restore submodule index entry
 318                 RESULT="failure"
 319         else
 320                 RESULT="success"
 321         fi
 322         test_expect_$RESULT "$command: added submodule creates empty directory" '
 323                 prolog &&
 324                 reset_work_tree_to no_submodule &&
 325                 (
 326                         cd submodule_update &&
 327                         git branch -t add_sub1 origin/add_sub1 &&
 328                         $command add_sub1 &&
 329                         test_superproject_content origin/add_sub1 &&
 330                         test_dir_is_empty sub1 &&
 331                         git submodule update --init --recursive &&
 332                         test_submodule_content sub1 origin/add_sub1
 333                 )
 334         '
 335         # ... and doesn't care if it already exists ...
 336         test_expect_$RESULT "$command: added submodule leaves existing empty directory alone" '
 337                 prolog &&
 338                 reset_work_tree_to no_submodule &&
 339                 (
 340                         cd submodule_update &&
 341                         mkdir sub1 &&
 342                         git branch -t add_sub1 origin/add_sub1 &&
 343                         $command add_sub1 &&
 344                         test_superproject_content origin/add_sub1 &&
 345                         test_dir_is_empty sub1 &&
 346                         git submodule update --init --recursive &&
 347                         test_submodule_content sub1 origin/add_sub1
 348                 )
 349         '
 350         # ... unless there is an untracked file in its place.
 351         test_expect_success "$command: added submodule doesn't remove untracked unignored file with same name" '
 352                 prolog &&
 353                 reset_work_tree_to no_submodule &&
 354                 (
 355                         cd submodule_update &&
 356                         git branch -t add_sub1 origin/add_sub1 &&
 357                         >sub1 &&
 358                         test_must_fail $command add_sub1 &&
 359                         test_superproject_content origin/no_submodule &&
 360                         test_must_be_empty sub1
 361                 )
 362         '
 363         # Replacing a tracked file with a submodule produces an empty
 364         # directory ...
 365         test_expect_$RESULT "$command: replace tracked file with submodule creates empty directory" '
 366                 prolog &&
 367                 reset_work_tree_to replace_sub1_with_file &&
 368                 (
 369                         cd submodule_update &&
 370                         git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
 371                         $command replace_file_with_sub1 &&
 372                         test_superproject_content origin/replace_file_with_sub1 &&
 373                         test_dir_is_empty sub1 &&
 374                         git submodule update --init --recursive &&
 375                         test_submodule_content sub1 origin/replace_file_with_sub1
 376                 )
 377         '
 378         # ... as does removing a directory with tracked files with a
 379         # submodule.
 380         if test "$KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR" = 1
 381         then
 382                 # Non fast-forward merges fail with "Directory sub1 doesn't
 383                 # exist. sub1" because the empty submodule directory is not
 384                 # created
 385                 RESULT="failure"
 386         else
 387                 RESULT="success"
 388         fi
 389         test_expect_$RESULT "$command: replace directory with submodule" '
 390                 prolog &&
 391                 reset_work_tree_to replace_sub1_with_directory &&
 392                 (
 393                         cd submodule_update &&
 394                         git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
 395                         $command replace_directory_with_sub1 &&
 396                         test_superproject_content origin/replace_directory_with_sub1 &&
 397                         test_dir_is_empty sub1 &&
 398                         git submodule update --init --recursive &&
 399                         test_submodule_content sub1 origin/replace_directory_with_sub1
 400                 )
 401         '
 402
 403         ######################## Disappearing submodule #######################
 404         # Removing a submodule doesn't remove its work tree ...
 405         if test "$KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES" = 1
 406         then
 407                 RESULT="failure"
 408         else
 409                 RESULT="success"
 410         fi
 411         test_expect_$RESULT "$command: removed submodule leaves submodule directory and its contents in place" '
 412                 prolog &&
 413                 reset_work_tree_to add_sub1 &&
 414                 (
 415                         cd submodule_update &&
 416                         git branch -t remove_sub1 origin/remove_sub1 &&
 417                         $command remove_sub1 &&
 418                         test_superproject_content origin/remove_sub1 &&
 419                         test_submodule_content sub1 origin/add_sub1
 420                 )
 421         '
 422         # ... especially when it contains a .git directory.
 423         test_expect_$RESULT "$command: removed submodule leaves submodule containing a .git directory alone" '
 424                 prolog &&
 425                 reset_work_tree_to add_sub1 &&
 426                 (
 427                         cd submodule_update &&
 428                         git branch -t remove_sub1 origin/remove_sub1 &&
 429                         replace_gitfile_with_git_dir sub1 &&
 430                         $command remove_sub1 &&
 431                         test_superproject_content origin/remove_sub1 &&
 432                         test_git_directory_is_unchanged sub1 &&
 433                         test_submodule_content sub1 origin/add_sub1
 434                 )
 435         '
 436         # Replacing a submodule with files in a directory must fail as the
 437         # submodule work tree isn't removed ...
 438         if test "$KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES" = 1
 439         then
 440                 # Non fast-forward merges attempt to merge the former
 441                 # submodule files with the newly checked out ones in the
 442                 # directory of the same name while it shouldn't.
 443                 RESULT="failure"
 444         else
 445                 RESULT="success"
 446         fi
 447         test_expect_$RESULT "$command: replace submodule with a directory must fail" '
 448                 prolog &&
 449                 reset_work_tree_to add_sub1 &&
 450                 (
 451                         cd submodule_update &&
 452                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
 453                         test_must_fail $command replace_sub1_with_directory &&
 454                         test_superproject_content origin/add_sub1 &&
 455                         test_submodule_content sub1 origin/add_sub1
 456                 )
 457         '
 458         # ... especially when it contains a .git directory.
 459         test_expect_$RESULT "$command: replace submodule containing a .git directory with a directory must fail" '
 460                 prolog &&
 461                 reset_work_tree_to add_sub1 &&
 462                 (
 463                         cd submodule_update &&
 464                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
 465                         replace_gitfile_with_git_dir sub1 &&
 466                         test_must_fail $command replace_sub1_with_directory &&
 467                         test_superproject_content origin/add_sub1 &&
 468                         test_git_directory_is_unchanged sub1 &&
 469                         test_submodule_content sub1 origin/add_sub1
 470                 )
 471         '
 472         # Replacing it with a file must fail as it could throw away any local
 473         # work tree changes ...
 474         test_expect_failure "$command: replace submodule with a file must fail" '
 475                 prolog &&
 476                 reset_work_tree_to add_sub1 &&
 477                 (
 478                         cd submodule_update &&
 479                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
 480                         test_must_fail $command replace_sub1_with_file &&
 481                         test_superproject_content origin/add_sub1 &&
 482                         test_submodule_content sub1 origin/add_sub1
 483                 )
 484         '
 485         # ... or even destroy unpushed parts of submodule history if that
 486         # still uses a .git directory.
 487         test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" '
 488                 prolog &&
 489                 reset_work_tree_to add_sub1 &&
 490                 (
 491                         cd submodule_update &&
 492                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
 493                         replace_gitfile_with_git_dir sub1 &&
 494                         test_must_fail $command replace_sub1_with_file &&
 495                         test_superproject_content origin/add_sub1 &&
 496                         test_git_directory_is_unchanged sub1 &&
 497                         test_submodule_content sub1 origin/add_sub1
 498                 )
 499         '
 500
 501         ########################## Modified submodule #########################
 502         # Updating a submodule sha1 doesn't update the submodule's work tree
 503         if test "$KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT" = 1
 504         then
 505                 # When cherry picking a SHA-1 update for an ignored submodule
 506                 # the commit incorrectly fails with "The previous cherry-pick
 507                 # is now empty, possibly due to conflict resolution."
 508                 RESULT="failure"
 509         else
 510                 RESULT="success"
 511         fi
 512         test_expect_$RESULT "$command: modified submodule does not update submodule work tree" '
 513                 prolog &&
 514                 reset_work_tree_to add_sub1 &&
 515                 (
 516                         cd submodule_update &&
 517                         git branch -t modify_sub1 origin/modify_sub1 &&
 518                         $command modify_sub1 &&
 519                         test_superproject_content origin/modify_sub1 &&
 520                         test_submodule_content sub1 origin/add_sub1 &&
 521                         git submodule update &&
 522                         test_submodule_content sub1 origin/modify_sub1
 523                 )
 524         '
 525
 526         # Updating a submodule to an invalid sha1 doesn't update the
 527         # submodule's work tree, subsequent update will fail
 528         test_expect_$RESULT "$command: modified submodule does not update submodule work tree to invalid commit" '
 529                 prolog &&
 530                 reset_work_tree_to add_sub1 &&
 531                 (
 532                         cd submodule_update &&
 533                         git branch -t invalid_sub1 origin/invalid_sub1 &&
 534                         $command invalid_sub1 &&
 535                         test_superproject_content origin/invalid_sub1 &&
 536                         test_submodule_content sub1 origin/add_sub1 &&
 537                         test_must_fail git submodule update &&
 538                         test_submodule_content sub1 origin/add_sub1
 539                 )
 540         '
 541         # Updating a submodule from an invalid sha1 doesn't update the
 542         # submodule's work tree, subsequent update will succeed
 543         test_expect_$RESULT "$command: modified submodule does not update submodule work tree from invalid commit" '
 544                 prolog &&
 545                 reset_work_tree_to invalid_sub1 &&
 546                 (
 547                         cd submodule_update &&
 548                         git branch -t valid_sub1 origin/valid_sub1 &&
 549                         $command valid_sub1 &&
 550                         test_superproject_content origin/valid_sub1 &&
 551                         test_dir_is_empty sub1 &&
 552                         git submodule update --init --recursive &&
 553                         test_submodule_content sub1 origin/valid_sub1
 554                 )
 555         '
 556 }
 557
 558 # Test that submodule contents are currently not updated when switching
 559 # between commits that change a submodule, but throwing away local changes in
 560 # the superproject is allowed.
 561 test_submodule_forced_switch () {
 562         command="$1"
 563         ######################### Appearing submodule #########################
 564         # Switching to a commit letting a submodule appear creates empty dir ...
 565         test_expect_success "$command: added submodule creates empty directory" '
 566                 prolog &&
 567                 reset_work_tree_to no_submodule &&
 568                 (
 569                         cd submodule_update &&
 570                         git branch -t add_sub1 origin/add_sub1 &&
 571                         $command add_sub1 &&
 572                         test_superproject_content origin/add_sub1 &&
 573                         test_dir_is_empty sub1 &&
 574                         git submodule update --init --recursive &&
 575                         test_submodule_content sub1 origin/add_sub1
 576                 )
 577         '
 578         # ... and doesn't care if it already exists ...
 579         test_expect_success "$command: added submodule leaves existing empty directory alone" '
 580                 prolog &&
 581                 reset_work_tree_to no_submodule &&
 582                 (
 583                         cd submodule_update &&
 584                         git branch -t add_sub1 origin/add_sub1 &&
 585                         mkdir sub1 &&
 586                         $command add_sub1 &&
 587                         test_superproject_content origin/add_sub1 &&
 588                         test_dir_is_empty sub1 &&
 589                         git submodule update --init --recursive &&
 590                         test_submodule_content sub1 origin/add_sub1
 591                 )
 592         '
 593         # ... unless there is an untracked file in its place.
 594         test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" '
 595                 prolog &&
 596                 reset_work_tree_to no_submodule &&
 597                 (
 598                         cd submodule_update &&
 599                         git branch -t add_sub1 origin/add_sub1 &&
 600                         >sub1 &&
 601                         $command add_sub1 &&
 602                         test_superproject_content origin/add_sub1 &&
 603                         test_dir_is_empty sub1
 604                 )
 605         '
 606         # Replacing a tracked file with a submodule produces an empty
 607         # directory ...
 608         test_expect_success "$command: replace tracked file with submodule creates empty directory" '
 609                 prolog &&
 610                 reset_work_tree_to replace_sub1_with_file &&
 611                 (
 612                         cd submodule_update &&
 613                         git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
 614                         $command replace_file_with_sub1 &&
 615                         test_superproject_content origin/replace_file_with_sub1 &&
 616                         test_dir_is_empty sub1 &&
 617                         git submodule update --init --recursive &&
 618                         test_submodule_content sub1 origin/replace_file_with_sub1
 619                 )
 620         '
 621         # ... as does removing a directory with tracked files with a
 622         # submodule.
 623         test_expect_success "$command: replace directory with submodule" '
 624                 prolog &&
 625                 reset_work_tree_to replace_sub1_with_directory &&
 626                 (
 627                         cd submodule_update &&
 628                         git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
 629                         $command replace_directory_with_sub1 &&
 630                         test_superproject_content origin/replace_directory_with_sub1 &&
 631                         test_dir_is_empty sub1 &&
 632                         git submodule update --init --recursive &&
 633                         test_submodule_content sub1 origin/replace_directory_with_sub1
 634                 )
 635         '
 636
 637         ######################## Disappearing submodule #######################
 638         # Removing a submodule doesn't remove its work tree ...
 639         test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" '
 640                 prolog &&
 641                 reset_work_tree_to add_sub1 &&
 642                 (
 643                         cd submodule_update &&
 644                         git branch -t remove_sub1 origin/remove_sub1 &&
 645                         $command remove_sub1 &&
 646                         test_superproject_content origin/remove_sub1 &&
 647                         test_submodule_content sub1 origin/add_sub1
 648                 )
 649         '
 650         # ... especially when it contains a .git directory.
 651         test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" '
 652                 prolog &&
 653                 reset_work_tree_to add_sub1 &&
 654                 (
 655                         cd submodule_update &&
 656                         git branch -t remove_sub1 origin/remove_sub1 &&
 657                         replace_gitfile_with_git_dir sub1 &&
 658                         $command remove_sub1 &&
 659                         test_superproject_content origin/remove_sub1 &&
 660                         test_git_directory_is_unchanged sub1 &&
 661                         test_submodule_content sub1 origin/add_sub1
 662                 )
 663         '
 664         # Replacing a submodule with files in a directory must fail as the
 665         # submodule work tree isn't removed ...
 666         test_expect_failure "$command: replace submodule with a directory must fail" '
 667                 prolog &&
 668                 reset_work_tree_to add_sub1 &&
 669                 (
 670                         cd submodule_update &&
 671                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
 672                         test_must_fail $command replace_sub1_with_directory &&
 673                         test_superproject_content origin/add_sub1 &&
 674                         test_submodule_content sub1 origin/add_sub1
 675                 )
 676         '
 677         # ... especially when it contains a .git directory.
 678         test_expect_failure "$command: replace submodule containing a .git directory with a directory must fail" '
 679                 prolog &&
 680                 reset_work_tree_to add_sub1 &&
 681                 (
 682                         cd submodule_update &&
 683                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
 684                         replace_gitfile_with_git_dir sub1 &&
 685                         test_must_fail $command replace_sub1_with_directory &&
 686                         test_superproject_content origin/add_sub1 &&
 687                         test_git_directory_is_unchanged sub1 &&
 688                         test_submodule_content sub1 origin/add_sub1
 689                 )
 690         '
 691         # Replacing it with a file must fail as it could throw away any local
 692         # work tree changes ...
 693         test_expect_failure "$command: replace submodule with a file must fail" '
 694                 prolog &&
 695                 reset_work_tree_to add_sub1 &&
 696                 (
 697                         cd submodule_update &&
 698                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
 699                         test_must_fail $command replace_sub1_with_file &&
 700                         test_superproject_content origin/add_sub1 &&
 701                         test_submodule_content sub1 origin/add_sub1
 702                 )
 703         '
 704         # ... or even destroy unpushed parts of submodule history if that
 705         # still uses a .git directory.
 706         test_expect_failure "$command: replace submodule containing a .git directory with a file must fail" '
 707                 prolog &&
 708                 reset_work_tree_to add_sub1 &&
 709                 (
 710                         cd submodule_update &&
 711                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
 712                         replace_gitfile_with_git_dir sub1 &&
 713                         test_must_fail $command replace_sub1_with_file &&
 714                         test_superproject_content origin/add_sub1 &&
 715                         test_git_directory_is_unchanged sub1 &&
 716                         test_submodule_content sub1 origin/add_sub1
 717                 )
 718         '
 719
 720         ########################## Modified submodule #########################
 721         # Updating a submodule sha1 doesn't update the submodule's work tree
 722         test_expect_success "$command: modified submodule does not update submodule work tree" '
 723                 prolog &&
 724                 reset_work_tree_to add_sub1 &&
 725                 (
 726                         cd submodule_update &&
 727                         git branch -t modify_sub1 origin/modify_sub1 &&
 728                         $command modify_sub1 &&
 729                         test_superproject_content origin/modify_sub1 &&
 730                         test_submodule_content sub1 origin/add_sub1 &&
 731                         git submodule update &&
 732                         test_submodule_content sub1 origin/modify_sub1
 733                 )
 734         '
 735         # Updating a submodule to an invalid sha1 doesn't update the
 736         # submodule's work tree, subsequent update will fail
 737         test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" '
 738                 prolog &&
 739                 reset_work_tree_to add_sub1 &&
 740                 (
 741                         cd submodule_update &&
 742                         git branch -t invalid_sub1 origin/invalid_sub1 &&
 743                         $command invalid_sub1 &&
 744                         test_superproject_content origin/invalid_sub1 &&
 745                         test_submodule_content sub1 origin/add_sub1 &&
 746                         test_must_fail git submodule update &&
 747                         test_submodule_content sub1 origin/add_sub1
 748                 )
 749         '
 750         # Updating a submodule from an invalid sha1 doesn't update the
 751         # submodule's work tree, subsequent update will succeed
 752         test_expect_success "$command: modified submodule does not update submodule work tree from invalid commit" '
 753                 prolog &&
 754                 reset_work_tree_to invalid_sub1 &&
 755                 (
 756                         cd submodule_update &&
 757                         git branch -t valid_sub1 origin/valid_sub1 &&
 758                         $command valid_sub1 &&
 759                         test_superproject_content origin/valid_sub1 &&
 760                         test_dir_is_empty sub1 &&
 761                         git submodule update --init --recursive &&
 762                         test_submodule_content sub1 origin/valid_sub1
 763                 )
 764         '
 765 }
 766
 767 # Test that submodule contents are correctly updated when switching
 768 # between commits that change a submodule.
 769 # Test that the following transitions are correctly handled:
 770 # (These tests are also above in the case where we expect no change
 771 #  in the submodule)
 772 # - Updated submodule
 773 # - New submodule
 774 # - Removed submodule
 775 # - Directory containing tracked files replaced by submodule
 776 # - Submodule replaced by tracked files in directory
 777 # - Submodule replaced by tracked file with the same name
 778 # - tracked file replaced by submodule
 779 #
 780 # New test cases
 781 # - Removing a submodule with a git directory absorbs the submodules
 782 #   git directory first into the superproject.
 783
 784 test_submodule_switch_recursing_with_args () {
 785         cmd_args="$1"
 786         command="git $cmd_args --recurse-submodules"
 787         RESULTDS=success
 788         if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1
 789         then
 790                 RESULTDS=failure
 791         fi
 792         RESULTOI=success
 793         if test "$KNOWN_FAILURE_SUBMODULE_OVERWRITE_IGNORED_UNTRACKED" = 1
 794         then
 795                 RESULTOI=failure
 796         fi
 797         ######################### Appearing submodule #########################
 798         # Switching to a commit letting a submodule appear checks it out ...
 799         test_expect_success "$command: added submodule is checked out" '
 800                 prolog &&
 801                 reset_work_tree_to_interested no_submodule &&
 802                 (
 803                         cd submodule_update &&
 804                         git branch -t add_sub1 origin/add_sub1 &&
 805                         $command add_sub1 &&
 806                         test_superproject_content origin/add_sub1 &&
 807                         test_submodule_content sub1 origin/add_sub1
 808                 )
 809         '
 810         # ... ignoring an empty existing directory ...
 811         test_expect_success "$command: added submodule is checked out in empty dir" '
 812                 prolog &&
 813                 reset_work_tree_to_interested no_submodule &&
 814                 (
 815                         cd submodule_update &&
 816                         mkdir sub1 &&
 817                         git branch -t add_sub1 origin/add_sub1 &&
 818                         $command add_sub1 &&
 819                         test_superproject_content origin/add_sub1 &&
 820                         test_submodule_content sub1 origin/add_sub1
 821                 )
 822         '
 823         # ... unless there is an untracked file in its place.
 824         test_expect_success "$command: added submodule doesn't remove untracked file with same name" '
 825                 prolog &&
 826                 reset_work_tree_to_interested no_submodule &&
 827                 (
 828                         cd submodule_update &&
 829                         git branch -t add_sub1 origin/add_sub1 &&
 830                         : >sub1 &&
 831                         test_must_fail $command add_sub1 &&
 832                         test_superproject_content origin/no_submodule &&
 833                         test_must_be_empty sub1
 834                 )
 835         '
 836         # ... but an ignored file is fine.
 837         test_expect_$RESULTOI "$command: added submodule removes an untracked ignored file" '
 838                 test_when_finished "rm submodule_update/.git/info/exclude" &&
 839                 prolog &&
 840                 reset_work_tree_to_interested no_submodule &&
 841                 (
 842                         cd submodule_update &&
 843                         git branch -t add_sub1 origin/add_sub1 &&
 844                         : >sub1 &&
 845                         echo sub1 >.git/info/exclude
 846                         $command add_sub1 &&
 847                         test_superproject_content origin/add_sub1 &&
 848                         test_submodule_content sub1 origin/add_sub1
 849                 )
 850         '
 851         # Replacing a tracked file with a submodule produces a checked out submodule
 852         test_expect_success "$command: replace tracked file with submodule checks out submodule" '
 853                 prolog &&
 854                 reset_work_tree_to_interested replace_sub1_with_file &&
 855                 (
 856                         cd submodule_update &&
 857                         git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
 858                         $command replace_file_with_sub1 &&
 859                         test_superproject_content origin/replace_file_with_sub1 &&
 860                         test_submodule_content sub1 origin/replace_file_with_sub1
 861                 )
 862         '
 863         # ... as does removing a directory with tracked files with a submodule.
 864         test_expect_success "$command: replace directory with submodule" '
 865                 prolog &&
 866                 reset_work_tree_to_interested replace_sub1_with_directory &&
 867                 (
 868                         cd submodule_update &&
 869                         git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
 870                         $command replace_directory_with_sub1 &&
 871                         test_superproject_content origin/replace_directory_with_sub1 &&
 872                         test_submodule_content sub1 origin/replace_directory_with_sub1
 873                 )
 874         '
 875
 876         ######################## Disappearing submodule #######################
 877         # Removing a submodule removes its work tree ...
 878         test_expect_success "$command: removed submodule removes submodules working tree" '
 879                 prolog &&
 880                 reset_work_tree_to_interested add_sub1 &&
 881                 (
 882                         cd submodule_update &&
 883                         git branch -t remove_sub1 origin/remove_sub1 &&
 884                         $command remove_sub1 &&
 885                         test_superproject_content origin/remove_sub1 &&
 886                         ! test -e sub1
 887                 )
 888         '
 889         # ... absorbing a .git directory along the way.
 890         test_expect_success "$command: removed submodule absorbs submodules .git directory" '
 891                 prolog &&
 892                 reset_work_tree_to_interested add_sub1 &&
 893                 (
 894                         cd submodule_update &&
 895                         git branch -t remove_sub1 origin/remove_sub1 &&
 896                         replace_gitfile_with_git_dir sub1 &&
 897                         rm -rf .git/modules &&
 898                         $command remove_sub1 &&
 899                         test_superproject_content origin/remove_sub1 &&
 900                         ! test -e sub1 &&
 901                         test_git_directory_exists sub1
 902                 )
 903         '
 904         # Replacing a submodule with files in a directory must succeeds
 905         # when the submodule is clean
 906         test_expect_$RESULTDS "$command: replace submodule with a directory" '
 907                 prolog &&
 908                 reset_work_tree_to_interested add_sub1 &&
 909                 (
 910                         cd submodule_update &&
 911                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
 912                         $command replace_sub1_with_directory &&
 913                         test_superproject_content origin/replace_sub1_with_directory &&
 914                         test_submodule_content sub1 origin/replace_sub1_with_directory
 915                 )
 916         '
 917         # ... absorbing a .git directory.
 918         test_expect_$RESULTDS "$command: replace submodule containing a .git directory with a directory must absorb the git dir" '
 919                 prolog &&
 920                 reset_work_tree_to_interested add_sub1 &&
 921                 (
 922                         cd submodule_update &&
 923                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
 924                         replace_gitfile_with_git_dir sub1 &&
 925                         rm -rf .git/modules &&
 926                         $command replace_sub1_with_directory &&
 927                         test_superproject_content origin/replace_sub1_with_directory &&
 928                         test_git_directory_exists sub1
 929                 )
 930         '
 931
 932         # Replacing it with a file ...
 933         test_expect_success "$command: replace submodule with a file" '
 934                 prolog &&
 935                 reset_work_tree_to_interested add_sub1 &&
 936                 (
 937                         cd submodule_update &&
 938                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
 939                         $command replace_sub1_with_file &&
 940                         test_superproject_content origin/replace_sub1_with_file &&
 941                         test -f sub1
 942                 )
 943         '
 944
 945         # ... must check its local work tree for untracked files
 946         test_expect_$RESULTDS "$command: replace submodule with a file must fail with untracked files" '
 947                 prolog &&
 948                 reset_work_tree_to_interested add_sub1 &&
 949                 (
 950                         cd submodule_update &&
 951                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
 952                         : >sub1/untrackedfile &&
 953                         test_must_fail $command replace_sub1_with_file &&
 954                         test_superproject_content origin/add_sub1 &&
 955                         test_submodule_content sub1 origin/add_sub1
 956                 )
 957         '
 958
 959         # ... and ignored files are ignored
 960         test_expect_success "$command: replace submodule with a file works ignores ignored files in submodule" '
 961                 test_when_finished "rm submodule_update/.git/modules/sub1/info/exclude" &&
 962                 prolog &&
 963                 reset_work_tree_to_interested add_sub1 &&
 964                 (
 965                         cd submodule_update &&
 966                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
 967                         : >sub1/ignored &&
 968                         $command replace_sub1_with_file &&
 969                         test_superproject_content origin/replace_sub1_with_file &&
 970                         test -f sub1
 971                 )
 972         '
 973
 974         ########################## Modified submodule #########################
 975         # Updating a submodule sha1 updates the submodule's work tree
 976         test_expect_success "$command: modified submodule updates submodule work tree" '
 977                 prolog &&
 978                 reset_work_tree_to_interested add_sub1 &&
 979                 (
 980                         cd submodule_update &&
 981                         git branch -t modify_sub1 origin/modify_sub1 &&
 982                         $command modify_sub1 &&
 983                         test_superproject_content origin/modify_sub1 &&
 984                         test_submodule_content sub1 origin/modify_sub1
 985                 )
 986         '
 987
 988         test_expect_success "git -c submodule.recurse=true $cmd_args: modified submodule updates submodule work tree" '
 989                 prolog &&
 990                 reset_work_tree_to_interested add_sub1 &&
 991                 (
 992                         cd submodule_update &&
 993                         git branch -t modify_sub1 origin/modify_sub1 &&
 994                         git -c submodule.recurse=true $cmd_args modify_sub1 &&
 995                         test_superproject_content origin/modify_sub1 &&
 996                         test_submodule_content sub1 origin/modify_sub1
 997                 )
 998         '
 999
1000         # Updating a submodule to an invalid sha1 doesn't update the
1001         # superproject nor the submodule's work tree.
1002         test_expect_success "$command: updating to a missing submodule commit fails" '
1003                 prolog &&
1004                 reset_work_tree_to_interested add_sub1 &&
1005                 (
1006                         cd submodule_update &&
1007                         git branch -t invalid_sub1 origin/invalid_sub1 &&
1008                         test_must_fail $command invalid_sub1 &&
1009                         test_superproject_content origin/add_sub1 &&
1010                         test_submodule_content sub1 origin/add_sub1
1011                 )
1012         '
1013
1014         # recursing deeper than one level doesn't work yet.
1015         test_expect_success "$command: modified submodule updates submodule recursively" '
1016                 prolog &&
1017                 reset_work_tree_to_interested add_nested_sub &&
1018                 (
1019                         cd submodule_update &&
1020                         git branch -t modify_sub1_recursively origin/modify_sub1_recursively &&
1021                         $command modify_sub1_recursively &&
1022                         test_superproject_content origin/modify_sub1_recursively &&
1023                         test_submodule_content sub1 origin/modify_sub1_recursively &&
1024                         test_submodule_content -C sub1 sub2 origin/modify_sub1_recursively
1025                 )
1026         '
1027 }
1028
1029 # Test that submodule contents are updated when switching between commits
1030 # that change a submodule, but throwing away local changes in
1031 # the superproject as well as the submodule is allowed.
1032 test_submodule_forced_switch_recursing_with_args () {
1033         cmd_args="$1"
1034         command="git $cmd_args --recurse-submodules"
1035         RESULT=success
1036         if test "$KNOWN_FAILURE_DIRECTORY_SUBMODULE_CONFLICTS" = 1
1037         then
1038                 RESULT=failure
1039         fi
1040         ######################### Appearing submodule #########################
1041         # Switching to a commit letting a submodule appear creates empty dir ...
1042         test_expect_success "$command: added submodule is checked out" '
1043                 prolog &&
1044                 reset_work_tree_to_interested no_submodule &&
1045                 (
1046                         cd submodule_update &&
1047                         git branch -t add_sub1 origin/add_sub1 &&
1048                         $command add_sub1 &&
1049                         test_superproject_content origin/add_sub1 &&
1050                         test_submodule_content sub1 origin/add_sub1
1051                 )
1052         '
1053         # ... and doesn't care if it already exists ...
1054         test_expect_success "$command: added submodule ignores empty directory" '
1055                 prolog &&
1056                 reset_work_tree_to_interested no_submodule &&
1057                 (
1058                         cd submodule_update &&
1059                         git branch -t add_sub1 origin/add_sub1 &&
1060                         mkdir sub1 &&
1061                         $command add_sub1 &&
1062                         test_superproject_content origin/add_sub1 &&
1063                         test_submodule_content sub1 origin/add_sub1
1064                 )
1065         '
1066         # ... not caring about an untracked file either
1067         test_expect_success "$command: added submodule does remove untracked unignored file with same name when forced" '
1068                 prolog &&
1069                 reset_work_tree_to_interested no_submodule &&
1070                 (
1071                         cd submodule_update &&
1072                         git branch -t add_sub1 origin/add_sub1 &&
1073                         >sub1 &&
1074                         $command add_sub1 &&
1075                         test_superproject_content origin/add_sub1 &&
1076                         test_submodule_content sub1 origin/add_sub1
1077                 )
1078         '
1079         # Replacing a tracked file with a submodule checks out the submodule
1080         test_expect_success "$command: replace tracked file with submodule populates the submodule" '
1081                 prolog &&
1082                 reset_work_tree_to_interested replace_sub1_with_file &&
1083                 (
1084                         cd submodule_update &&
1085                         git branch -t replace_file_with_sub1 origin/replace_file_with_sub1 &&
1086                         $command replace_file_with_sub1 &&
1087                         test_superproject_content origin/replace_file_with_sub1 &&
1088                         test_submodule_content sub1 origin/replace_file_with_sub1
1089                 )
1090         '
1091         # ... as does removing a directory with tracked files with a
1092         # submodule.
1093         test_expect_success "$command: replace directory with submodule" '
1094                 prolog &&
1095                 reset_work_tree_to_interested replace_sub1_with_directory &&
1096                 (
1097                         cd submodule_update &&
1098                         git branch -t replace_directory_with_sub1 origin/replace_directory_with_sub1 &&
1099                         $command replace_directory_with_sub1 &&
1100                         test_superproject_content origin/replace_directory_with_sub1 &&
1101                         test_submodule_content sub1 origin/replace_directory_with_sub1
1102                 )
1103         '
1104
1105         ######################## Disappearing submodule #######################
1106         # Removing a submodule doesn't remove its work tree ...
1107         test_expect_success "$command: removed submodule leaves submodule directory and its contents in place" '
1108                 prolog &&
1109                 reset_work_tree_to_interested add_sub1 &&
1110                 (
1111                         cd submodule_update &&
1112                         git branch -t remove_sub1 origin/remove_sub1 &&
1113                         $command remove_sub1 &&
1114                         test_superproject_content origin/remove_sub1 &&
1115                         ! test -e sub1
1116                 )
1117         '
1118         # ... especially when it contains a .git directory.
1119         test_expect_success "$command: removed submodule leaves submodule containing a .git directory alone" '
1120                 prolog &&
1121                 reset_work_tree_to_interested add_sub1 &&
1122                 (
1123                         cd submodule_update &&
1124                         git branch -t remove_sub1 origin/remove_sub1 &&
1125                         replace_gitfile_with_git_dir sub1 &&
1126                         rm -rf .git/modules/sub1 &&
1127                         $command remove_sub1 &&
1128                         test_superproject_content origin/remove_sub1 &&
1129                         test_git_directory_exists sub1 &&
1130                         ! test -e sub1
1131                 )
1132         '
1133         # Replacing a submodule with files in a directory ...
1134         test_expect_success "$command: replace submodule with a directory" '
1135                 prolog &&
1136                 reset_work_tree_to_interested add_sub1 &&
1137                 (
1138                         cd submodule_update &&
1139                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
1140                         $command replace_sub1_with_directory &&
1141                         test_superproject_content origin/replace_sub1_with_directory
1142                 )
1143         '
1144         # ... absorbing a .git directory.
1145         test_expect_success "$command: replace submodule containing a .git directory with a directory must fail" '
1146                 prolog &&
1147                 reset_work_tree_to_interested add_sub1 &&
1148                 (
1149                         cd submodule_update &&
1150                         git branch -t replace_sub1_with_directory origin/replace_sub1_with_directory &&
1151                         replace_gitfile_with_git_dir sub1 &&
1152                         rm -rf .git/modules/sub1 &&
1153                         $command replace_sub1_with_directory &&
1154                         test_superproject_content origin/replace_sub1_with_directory &&
1155                         test_submodule_content sub1 origin/modify_sub1
1156                         test_git_directory_exists sub1
1157                 )
1158         '
1159         # Replacing it with a file
1160         test_expect_success "$command: replace submodule with a file" '
1161                 prolog &&
1162                 reset_work_tree_to_interested add_sub1 &&
1163                 (
1164                         cd submodule_update &&
1165                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
1166                         $command replace_sub1_with_file &&
1167                         test_superproject_content origin/replace_sub1_with_file
1168                 )
1169         '
1170
1171         # ... even if the submodule contains ignored files
1172         test_expect_success "$command: replace submodule with a file ignoring ignored files" '
1173                 prolog &&
1174                 reset_work_tree_to_interested add_sub1 &&
1175                 (
1176                         cd submodule_update &&
1177                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
1178                         : >sub1/expect &&
1179                         $command replace_sub1_with_file &&
1180                         test_superproject_content origin/replace_sub1_with_file
1181                 )
1182         '
1183
1184         # ... but stops for untracked files that would be lost
1185         test_expect_$RESULT "$command: replace submodule with a file stops for untracked files" '
1186                 prolog &&
1187                 reset_work_tree_to_interested add_sub1 &&
1188                 (
1189                         cd submodule_update &&
1190                         git branch -t replace_sub1_with_file origin/replace_sub1_with_file &&
1191                         : >sub1/untracked_file &&
1192                         test_must_fail $command replace_sub1_with_file &&
1193                         test_superproject_content origin/add_sub1 &&
1194                         test -f sub1/untracked_file
1195                 )
1196         '
1197
1198         ########################## Modified submodule #########################
1199         # Updating a submodule sha1 updates the submodule's work tree
1200         test_expect_success "$command: modified submodule updates submodule work tree" '
1201                 prolog &&
1202                 reset_work_tree_to_interested add_sub1 &&
1203                 (
1204                         cd submodule_update &&
1205                         git branch -t modify_sub1 origin/modify_sub1 &&
1206                         $command modify_sub1 &&
1207                         test_superproject_content origin/modify_sub1 &&
1208                         test_submodule_content sub1 origin/modify_sub1
1209                 )
1210         '
1211         # Updating a submodule to an invalid sha1 doesn't update the
1212         # submodule's work tree, subsequent update will fail
1213         test_expect_success "$command: modified submodule does not update submodule work tree to invalid commit" '
1214                 prolog &&
1215                 reset_work_tree_to_interested add_sub1 &&
1216                 (
1217                         cd submodule_update &&
1218                         git branch -t invalid_sub1 origin/invalid_sub1 &&
1219                         test_must_fail $command invalid_sub1 &&
1220                         test_superproject_content origin/add_sub1 &&
1221                         test_submodule_content sub1 origin/add_sub1
1222                 )
1223         '
1224         # Updating a submodule from an invalid sha1 updates
1225         test_expect_success "$command: modified submodule does update submodule work tree from invalid commit" '
1226                 prolog &&
1227                 reset_work_tree_to_interested invalid_sub1 &&
1228                 (
1229                         cd submodule_update &&
1230                         git branch -t valid_sub1 origin/valid_sub1 &&
1231                         $command valid_sub1 &&
1232                         test_superproject_content origin/valid_sub1 &&
1233                         test_submodule_content sub1 origin/valid_sub1
1234                 )
1235         '
1236
1237         # Old versions of Git were buggy writing the .git link file
1238         # (e.g. before f8eaa0ba98b and then moving the superproject repo
1239         # whose submodules contained absolute paths)
1240         test_expect_success "$command: updating submodules fixes .git links" '
1241                 prolog &&
1242                 reset_work_tree_to_interested add_sub1 &&
1243                 (
1244                         cd submodule_update &&
1245                         git branch -t modify_sub1 origin/modify_sub1 &&
1246                         echo "gitdir: bogus/path" >sub1/.git &&
1247                         $command modify_sub1 &&
1248                         test_superproject_content origin/modify_sub1 &&
1249                         test_submodule_content sub1 origin/modify_sub1
1250                 )
1251         '
1252 }