git-bisect.sh

   1 #!/bin/sh
   2
   3 USAGE='[start|bad|good|skip|next|reset|visualize|replay|log|run]'
   4 LONG_USAGE='git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
   5         reset bisect state and start bisection.
   6 git bisect bad [<rev>]
   7         mark <rev> a known-bad revision.
   8 git bisect good [<rev>...]
   9         mark <rev>... known-good revisions.
  10 git bisect skip [<rev>...]
  11         mark <rev>... untestable revisions.
  12 git bisect next
  13         find next bisection to test and check it out.
  14 git bisect reset [<branch>]
  15         finish bisection search and go back to branch.
  16 git bisect visualize
  17         show bisect status in gitk.
  18 git bisect replay <logfile>
  19         replay bisection log.
  20 git bisect log
  21         show bisect log.
  22 git bisect run <cmd>...
  23         use <cmd>... to automatically bisect.'
  24
  25 OPTIONS_SPEC=
  26 . git-sh-setup
  27 require_work_tree
  28
  29 _x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
  30 _x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
  31
  32 sq() {
  33         @@PERL@@ -e '
  34                 for (@ARGV) {
  35                         s/'\''/'\'\\\\\'\''/g;
  36                         print " '\''$_'\''";
  37                 }
  38                 print "\n";
  39         ' "$@"
  40 }
  41
  42 bisect_autostart() {
  43         test -f "$GIT_DIR/BISECT_NAMES" || {
  44                 echo >&2 'You need to start by "git bisect start"'
  45                 if test -t 0
  46                 then
  47                         echo >&2 -n 'Do you want me to do it for you [Y/n]? '
  48                         read yesno
  49                         case "$yesno" in
  50                         [Nn]*)
  51                                 exit ;;
  52                         esac
  53                         bisect_start
  54                 else
  55                         exit 1
  56                 fi
  57         }
  58 }
  59
  60 bisect_start() {
  61         #
  62         # Verify HEAD. If we were bisecting before this, reset to the
  63         # top-of-line master first!
  64         #
  65         head=$(GIT_DIR="$GIT_DIR" git symbolic-ref -q HEAD) ||
  66         head=$(GIT_DIR="$GIT_DIR" git rev-parse --verify HEAD) ||
  67         die "Bad HEAD - I need a HEAD"
  68         start_head=''
  69         case "$head" in
  70         refs/heads/bisect)
  71                 if [ -s "$GIT_DIR/BISECT_START" ]; then
  72                     branch=`cat "$GIT_DIR/BISECT_START"`
  73                 else
  74                     branch=master
  75                 fi
  76                 git checkout $branch || exit
  77                 ;;
  78         refs/heads/*|$_x40)
  79                 # This error message should only be triggered by cogito usage,
  80                 # and cogito users should understand it relates to cg-seek.
  81                 [ -s "$GIT_DIR/head-name" ] && die "won't bisect on seeked tree"
  82                 start_head="${head#refs/heads/}"
  83                 ;;
  84         *)
  85                 die "Bad HEAD - strange symbolic ref"
  86                 ;;
  87         esac
  88
  89         #
  90         # Get rid of any old bisect state
  91         #
  92         bisect_clean_state
  93
  94         #
  95         # Check for one bad and then some good revisions.
  96         #
  97         has_double_dash=0
  98         for arg; do
  99             case "$arg" in --) has_double_dash=1; break ;; esac
 100         done
 101         orig_args=$(sq "$@")
 102         bad_seen=0
 103         eval=''
 104         while [ $# -gt 0 ]; do
 105             arg="$1"
 106             case "$arg" in
 107             --)
 108                 shift
 109                 break
 110                 ;;
 111             *)
 112                 rev=$(git rev-parse --verify "$arg^{commit}" 2>/dev/null) || {
 113                     test $has_double_dash -eq 1 &&
 114                         die "'$arg' does not appear to be a valid revision"
 115                     break
 116                 }
 117                 case $bad_seen in
 118                 0) state='bad' ; bad_seen=1 ;;
 119                 *) state='good' ;;
 120                 esac
 121                 eval="$eval bisect_write '$state' '$rev' 'nolog'; "
 122                 shift
 123                 ;;
 124             esac
 125         done
 126
 127         sq "$@" >"$GIT_DIR/BISECT_NAMES"
 128         test -n "$start_head" && echo "$start_head" >"$GIT_DIR/BISECT_START"
 129         eval "$eval"
 130         echo "git-bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG"
 131         bisect_auto_next
 132 }
 133
 134 bisect_write() {
 135         state="$1"
 136         rev="$2"
 137         nolog="$3"
 138         case "$state" in
 139                 bad)            tag="$state" ;;
 140                 good|skip)      tag="$state"-"$rev" ;;
 141                 *)              die "Bad bisect_write argument: $state" ;;
 142         esac
 143         git update-ref "refs/bisect/$tag" "$rev"
 144         echo "# $state: $(git show-branch $rev)" >>"$GIT_DIR/BISECT_LOG"
 145         test -z "$nolog" && echo "git-bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
 146 }
 147
 148 bisect_state() {
 149         bisect_autostart
 150         state=$1
 151         case "$#,$state" in
 152         0,*)
 153                 die "Please call 'bisect_state' with at least one argument." ;;
 154         1,bad|1,good|1,skip)
 155                 rev=$(git rev-parse --verify HEAD) ||
 156                         die "Bad rev input: HEAD"
 157                 bisect_write "$state" "$rev" ;;
 158         2,bad|*,good|*,skip)
 159                 shift
 160                 eval=''
 161                 for rev in "$@"
 162                 do
 163                         sha=$(git rev-parse --verify "$rev^{commit}") ||
 164                                 die "Bad rev input: $rev"
 165                         eval="$eval bisect_write '$state' '$sha'; "
 166                 done
 167                 eval "$eval" ;;
 168         *,bad)
 169                 die "'git bisect bad' can take only one argument." ;;
 170         *)
 171                 usage ;;
 172         esac
 173         bisect_auto_next
 174 }
 175
 176 bisect_next_check() {
 177         missing_good= missing_bad=
 178         git show-ref -q --verify refs/bisect/bad || missing_bad=t
 179         test -n "$(git for-each-ref "refs/bisect/good-*")" || missing_good=t
 180
 181         case "$missing_good,$missing_bad,$1" in
 182         ,,*)
 183                 : have both good and bad - ok
 184                 ;;
 185         *,)
 186                 # do not have both but not asked to fail - just report.
 187                 false
 188                 ;;
 189         t,,good)
 190                 # have bad but not good.  we could bisect although
 191                 # this is less optimum.
 192                 echo >&2 'Warning: bisecting only with a bad commit.'
 193                 if test -t 0
 194                 then
 195                         printf >&2 'Are you sure [Y/n]? '
 196                         case "$(read yesno)" in [Nn]*) exit 1 ;; esac
 197                 fi
 198                 : bisect without good...
 199                 ;;
 200         *)
 201                 THEN=''
 202                 test -f "$GIT_DIR/BISECT_NAMES" || {
 203                         echo >&2 'You need to start by "git bisect start".'
 204                         THEN='then '
 205                 }
 206                 echo >&2 'You '$THEN'need to give me at least one good' \
 207                         'and one bad revisions.'
 208                 echo >&2 '(You can use "git bisect bad" and' \
 209                         '"git bisect good" for that.)'
 210                 exit 1 ;;
 211         esac
 212 }
 213
 214 bisect_auto_next() {
 215         bisect_next_check && bisect_next || :
 216 }
 217
 218 filter_skipped() {
 219         _eval="$1"
 220         _skip="$2"
 221
 222         if [ -z "$_skip" ]; then
 223                 eval $_eval
 224                 return
 225         fi
 226
 227         # Let's parse the output of:
 228         # "git rev-list --bisect-vars --bisect-all ..."
 229         eval $_eval | while read hash line
 230         do
 231                 case "$VARS,$FOUND,$TRIED,$hash" in
 232                         # We display some vars.
 233                         1,*,*,*) echo "$hash $line" ;;
 234
 235                         # Split line.
 236                         ,*,*,---*) ;;
 237
 238                         # We had nothing to search.
 239                         ,,,bisect_rev*)
 240                                 echo "bisect_rev="
 241                                 VARS=1
 242                                 ;;
 243
 244                         # We did not find a good bisect rev.
 245                         # This should happen only if the "bad"
 246                         # commit is also a "skip" commit.
 247                         ,,*,bisect_rev*)
 248                                 echo "bisect_rev=$TRIED"
 249                                 VARS=1
 250                                 ;;
 251
 252                         # We are searching.
 253                         ,,*,*)
 254                                 TRIED="${TRIED:+$TRIED|}$hash"
 255                                 case "$_skip" in
 256                                 *$hash*) ;;
 257                                 *)
 258                                         echo "bisect_rev=$hash"
 259                                         echo "bisect_tried=\"$TRIED\""
 260                                         FOUND=1
 261                                         ;;
 262                                 esac
 263                                 ;;
 264
 265                         # We have already found a rev to be tested.
 266                         ,1,*,bisect_rev*) VARS=1 ;;
 267                         ,1,*,*) ;;
 268
 269                         # ???
 270                         *) die "filter_skipped error " \
 271                             "VARS: '$VARS' " \
 272                             "FOUND: '$FOUND' " \
 273                             "TRIED: '$TRIED' " \
 274                             "hash: '$hash' " \
 275                             "line: '$line'"
 276                         ;;
 277                 esac
 278         done
 279 }
 280
 281 exit_if_skipped_commits () {
 282         _tried=$1
 283         if expr "$_tried" : ".*[|].*" > /dev/null ; then
 284                 echo "There are only 'skip'ped commit left to test."
 285                 echo "The first bad commit could be any of:"
 286                 echo "$_tried" | tr '[|]' '[\012]'
 287                 echo "We cannot bisect more!"
 288                 exit 2
 289         fi
 290 }
 291
 292 bisect_next() {
 293         case "$#" in 0) ;; *) usage ;; esac
 294         bisect_autostart
 295         bisect_next_check good
 296
 297         skip=$(git for-each-ref --format='%(objectname)' \
 298                 "refs/bisect/skip-*" | tr '\012' ' ') || exit
 299
 300         BISECT_OPT=''
 301         test -n "$skip" && BISECT_OPT='--bisect-all'
 302
 303         bad=$(git rev-parse --verify refs/bisect/bad) &&
 304         good=$(git for-each-ref --format='^%(objectname)' \
 305                 "refs/bisect/good-*" | tr '\012' ' ') &&
 306         eval="git rev-list --bisect-vars $BISECT_OPT $good $bad --" &&
 307         eval="$eval $(cat "$GIT_DIR/BISECT_NAMES")" &&
 308         eval=$(filter_skipped "$eval" "$skip") &&
 309         eval "$eval" || exit
 310
 311         if [ -z "$bisect_rev" ]; then
 312                 echo "$bad was both good and bad"
 313                 exit 1
 314         fi
 315         if [ "$bisect_rev" = "$bad" ]; then
 316                 exit_if_skipped_commits "$bisect_tried"
 317                 echo "$bisect_rev is first bad commit"
 318                 git diff-tree --pretty $bisect_rev
 319                 exit 0
 320         fi
 321
 322         # We should exit here only if the "bad"
 323         # commit is also a "skip" commit (see above).
 324         exit_if_skipped_commits "$bisect_rev"
 325
 326         echo "Bisecting: $bisect_nr revisions left to test after this"
 327         git branch -f new-bisect "$bisect_rev"
 328         git checkout -q new-bisect || exit
 329         git branch -M new-bisect bisect
 330         git show-branch "$bisect_rev"
 331 }
 332
 333 bisect_visualize() {
 334         bisect_next_check fail
 335
 336         if test $# = 0
 337         then
 338                 case "${DISPLAY+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" in
 339                 '')     set git log ;;
 340                 set*)   set gitk ;;
 341                 esac
 342         else
 343                 case "$1" in
 344                 git*|tig) ;;
 345                 -*)     set git log "$@" ;;
 346                 *)      set git "$@" ;;
 347                 esac
 348         fi
 349
 350         not=$(git for-each-ref --format='%(refname)' "refs/bisect/good-*")
 351         eval '"$@"' refs/bisect/bad --not $not -- $(cat "$GIT_DIR/BISECT_NAMES")
 352 }
 353
 354 bisect_reset() {
 355         test -f "$GIT_DIR/BISECT_NAMES" || {
 356                 echo "We are not bisecting."
 357                 return
 358         }
 359         case "$#" in
 360         0) if [ -s "$GIT_DIR/BISECT_START" ]; then
 361                branch=`cat "$GIT_DIR/BISECT_START"`
 362            else
 363                branch=master
 364            fi ;;
 365         1) git show-ref --verify --quiet -- "refs/heads/$1" ||
 366                die "$1 does not seem to be a valid branch"
 367            branch="$1" ;;
 368         *)
 369             usage ;;
 370         esac
 371         if git checkout "$branch"; then
 372                 # Cleanup head-name if it got left by an old version of git-bisect
 373                 rm -f "$GIT_DIR/head-name"
 374                 rm -f "$GIT_DIR/BISECT_START"
 375                 bisect_clean_state
 376         fi
 377 }
 378
 379 bisect_clean_state() {
 380         # There may be some refs packed during bisection.
 381         git for-each-ref --format='%(refname) %(objectname)' refs/bisect/\* refs/heads/bisect |
 382         while read ref hash
 383         do
 384                 git update-ref -d $ref $hash
 385         done
 386         rm -f "$GIT_DIR/BISECT_LOG"
 387         rm -f "$GIT_DIR/BISECT_NAMES"
 388         rm -f "$GIT_DIR/BISECT_RUN"
 389 }
 390
 391 bisect_replay () {
 392         test -r "$1" || die "cannot read $1 for replaying"
 393         bisect_reset
 394         while read bisect command rev
 395         do
 396                 test "$bisect" = "git-bisect" || continue
 397                 case "$command" in
 398                 start)
 399                         cmd="bisect_start $rev"
 400                         eval "$cmd" ;;
 401                 good|bad|skip)
 402                         bisect_write "$command" "$rev" ;;
 403                 *)
 404                         die "?? what are you talking about?" ;;
 405                 esac
 406         done <"$1"
 407         bisect_auto_next
 408 }
 409
 410 bisect_run () {
 411     bisect_next_check fail
 412
 413     while true
 414     do
 415       echo "running $@"
 416       "$@"
 417       res=$?
 418
 419       # Check for really bad run error.
 420       if [ $res -lt 0 -o $res -ge 128 ]; then
 421           echo >&2 "bisect run failed:"
 422           echo >&2 "exit code $res from '$@' is < 0 or >= 128"
 423           exit $res
 424       fi
 425
 426       # Find current state depending on run success or failure.
 427       # A special exit code of 125 means cannot test.
 428       if [ $res -eq 125 ]; then
 429           state='skip'
 430       elif [ $res -gt 0 ]; then
 431           state='bad'
 432       else
 433           state='good'
 434       fi
 435
 436       # We have to use a subshell because "bisect_state" can exit.
 437       ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
 438       res=$?
 439
 440       cat "$GIT_DIR/BISECT_RUN"
 441
 442       if grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
 443                 > /dev/null; then
 444           echo >&2 "bisect run cannot continue any more"
 445           exit $res
 446       fi
 447
 448       if [ $res -ne 0 ]; then
 449           echo >&2 "bisect run failed:"
 450           echo >&2 "'bisect_state $state' exited with error code $res"
 451           exit $res
 452       fi
 453
 454       if grep "is first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
 455           echo "bisect run success"
 456           exit 0;
 457       fi
 458
 459     done
 460 }
 461
 462
 463 case "$#" in
 464 0)
 465     usage ;;
 466 *)
 467     cmd="$1"
 468     shift
 469     case "$cmd" in
 470     start)
 471         bisect_start "$@" ;;
 472     bad|good|skip)
 473         bisect_state "$cmd" "$@" ;;
 474     next)
 475         # Not sure we want "next" at the UI level anymore.
 476         bisect_next "$@" ;;
 477     visualize|view)
 478         bisect_visualize "$@" ;;
 479     reset)
 480         bisect_reset "$@" ;;
 481     replay)
 482         bisect_replay "$@" ;;
 483     log)
 484         cat "$GIT_DIR/BISECT_LOG" ;;
 485     run)
 486         bisect_run "$@" ;;
 487     *)
 488         usage ;;
 489     esac
 490 esac