5 Using these options, linkgit:git-rev-list[1] will act similar to the
6 more specialized family of commit log tools: linkgit:git-log[1],
7 linkgit:git-show[1], and linkgit:git-whatchanged[1]
10 include::pretty-options.txt[]
14 Synonym for `--date=relative`.
16 --date={relative,local,default,iso,rfc,short}::
18 Only takes effect for dates shown in human-readable format, such
19 as when using "--pretty". `log.date` config variable sets a default
20 value for log command's --date option.
22 `--date=relative` shows dates relative to the current time,
25 `--date=local` shows timestamps in user's local timezone.
27 `--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format.
29 `--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822
30 format, often found in E-mail messages.
32 `--date=short` shows only date but not time, in `YYYY-MM-DD` format.
34 `--date=default` shows timestamps in the original timezone
35 (either committer's or author's).
40 Print the contents of the commit in raw-format; each record is
41 separated with a NUL character.
46 Print the parents of the commit.
50 Print the children of the commit.
54 Print the raw commit timestamp.
59 Mark which side of a symmetric diff a commit is reachable from.
60 Commits from the left side are prefixed with `<` and those from
61 the right with `>`. If combined with `--boundary`, those
62 commits are prefixed with `-`.
64 For example, if you have this topology:
66 -----------------------------------------------------------------------
71 o---x---a---a branch A
72 -----------------------------------------------------------------------
74 you would get an output like this:
76 -----------------------------------------------------------------------
77 $ git rev-list --left-right --boundary --pretty=oneline A...B
85 -----------------------------------------------------------------------
89 Draw a text-based graphical representation of the commit history
90 on the left hand side of the output. This may cause extra lines
91 to be printed in between commits, in order for the graph history
94 This implies the '--topo-order' option by default, but the
95 '--date-order' option may also be specified.
100 Below are listed options that control the formatting of diff output.
101 Some of them are specific to linkgit:git-rev-list[1], however other diff
102 options may be given. See linkgit:git-diff-files[1] for more options.
106 This flag changes the way a merge commit is displayed. It shows
107 the differences from each of the parents to the merge result
108 simultaneously instead of showing pairwise diff between a parent
109 and the result one at a time. Furthermore, it lists only files
110 which were modified from all parents.
114 This flag implies the '-c' options and further compresses the
115 patch output by omitting uninteresting hunks whose contents in
116 the parents have only two variants and the merge result picks
117 one of them without modification.
121 Show recursive diffs.
125 Show the tree objects in the diff output. This implies '-r'.
130 Besides specifying a range of commits that should be listed using the
131 special notations explained in the description, additional commit
132 limiting may be applied.
137 --max-count='number'::
139 Limit the number of commits output.
143 Skip 'number' commits before starting to show the commit output.
148 Show commits more recent than a specific date.
153 Show commits older than a specific date.
155 ifdef::git-rev-list[]
156 --max-age='timestamp'::
157 --min-age='timestamp'::
159 Limit the commits output to specified time range.
160 endif::git-rev-list[]
163 --committer='pattern'::
165 Limit the commits output to ones with author/committer
166 header lines that match the specified pattern (regular expression).
170 Limit the commits output to ones with log message that
171 matches the specified pattern (regular expression).
174 --regexp-ignore-case::
176 Match the regexp limiting patterns without regard to letters case.
181 Consider the limiting patterns to be extended regular expressions
182 instead of the default basic regular expressions.
187 Consider the limiting patterns to be fixed strings (don't interpret
188 pattern as a regular expression).
192 Stop when a given path disappears from the tree.
196 Show also parts of history irrelevant to current state of given
197 paths. This turns off history simplification, which removed merges
198 which didn't change anything at all at some child. It will still actually
199 simplify away merges that didn't change anything at all into either
204 Simplify away commits that did not change the given paths, similar
205 to `--full-history`, and further remove merges none of whose
206 parent history changes the given paths.
210 Do not print commits with more than one parent.
213 Follow only the first parent commit upon seeing a merge
214 commit. This option can give a better overview when
215 viewing the evolution of a particular topic branch,
216 because merges into a topic branch tend to be only about
217 adjusting to updated upstream from time to time, and
218 this option allows you to ignore the individual commits
219 brought in to your history by such a merge.
223 Reverses the meaning of the '{caret}' prefix (or lack thereof)
224 for all following revision specifiers, up to the next '--not'.
228 Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the
229 command line as '<commit>'.
231 ifdef::git-rev-list[]
234 In addition to the '<commit>' listed on the command
235 line, read them from the standard input.
239 Don't print anything to standard output. This form
240 is primarily meant to allow the caller to
241 test the exit status to see if a range of objects is fully
242 connected (or not). It is faster than redirecting stdout
243 to /dev/null as the output does not have to be formatted.
244 endif::git-rev-list[]
248 Omit any commit that introduces the same change as
249 another commit on the "other side" when the set of
250 commits are limited with symmetric difference.
252 For example, if you have two branches, `A` and `B`, a usual way
253 to list all commits on only one side of them is with
254 `--left-right`, like the example above in the description of
255 that option. It however shows the commits that were cherry-picked
256 from the other branch (for example, "3rd on b" may be cherry-picked
257 from branch A). With this option, such pairs of commits are
258 excluded from the output.
263 Instead of walking the commit ancestry chain, walk
264 reflog entries from the most recent one to older ones.
265 When this option is used you cannot specify commits to
266 exclude (that is, '{caret}commit', 'commit1..commit2',
267 nor 'commit1...commit2' notations cannot be used).
269 With '\--pretty' format other than oneline (for obvious reasons),
270 this causes the output to have two extra lines of information
271 taken from the reflog. By default, 'commit@\{Nth}' notation is
272 used in the output. When the starting commit is specified as
273 'commit@\{now}', output also uses 'commit@\{timestamp}' notation
274 instead. Under '\--pretty=oneline', the commit message is
275 prefixed with this information on the same line.
276 This option cannot be combined with '\--reverse'.
277 See also linkgit:git-reflog[1].
281 After a failed merge, show refs that touch files having a
282 conflict and don't exist on all heads to merge.
286 Output uninteresting commits at the boundary, which are usually
292 When optional paths are given, the default behaviour ('--dense') is to
293 only output commits that changes at least one of them, and also ignore
294 merges that do not touch the given paths.
296 Use the '--sparse' flag to makes the command output all eligible commits
297 (still subject to count and age limitation), but apply merge
298 simplification nevertheless.
300 ifdef::git-rev-list[]
303 Limit output to the one commit object which is roughly halfway between
304 the included and excluded commits. Thus, if
306 -----------------------------------------------------------------------
307 $ git-rev-list --bisect foo ^bar ^baz
308 -----------------------------------------------------------------------
310 outputs 'midpoint', the output of the two commands
312 -----------------------------------------------------------------------
313 $ git-rev-list foo ^midpoint
314 $ git-rev-list midpoint ^bar ^baz
315 -----------------------------------------------------------------------
317 would be of roughly the same length. Finding the change which
318 introduces a regression is thus reduced to a binary search: repeatedly
319 generate and test new 'midpoint's until the commit chain is of length
324 This calculates the same as `--bisect`, but outputs text ready
325 to be eval'ed by the shell. These lines will assign the name of
326 the midpoint revision to the variable `bisect_rev`, and the
327 expected number of commits to be tested after `bisect_rev` is
328 tested to `bisect_nr`, the expected number of commits to be
329 tested if `bisect_rev` turns out to be good to `bisect_good`,
330 the expected number of commits to be tested if `bisect_rev`
331 turns out to be bad to `bisect_bad`, and the number of commits
332 we are bisecting right now to `bisect_all`.
336 This outputs all the commit objects between the included and excluded
337 commits, ordered by their distance to the included and excluded
338 commits. The farthest from them is displayed first. (This is the only
339 one displayed by `--bisect`.)
341 This is useful because it makes it easy to choose a good commit to
342 test when you want to avoid to test some of them for some reason (they
343 may not compile for example).
345 This option can be used along with `--bisect-vars`, in this case,
346 after all the sorted commit objects, there will be the same text as if
347 `--bisect-vars` had been used alone.
348 endif::git-rev-list[]
355 By default, the commits are shown in reverse chronological order.
359 This option makes them appear in topological order (i.e.
360 descendant commits are shown before their parents).
364 This option is similar to '--topo-order' in the sense that no
365 parent comes before all of its children, but otherwise things
366 are still ordered in the commit timestamp order.
370 Output the commits in reverse order.
371 Cannot be combined with '\--walk-reflogs'.
376 These options are mostly targeted for packing of git repositories.
380 Print the object IDs of any object referenced by the listed
381 commits. '--objects foo ^bar' thus means "send me
382 all object IDs which I need to download if I have the commit
383 object 'bar', but not 'foo'".
387 Similar to '--objects', but also print the IDs of excluded
388 commits prefixed with a "-" character. This is used by
389 linkgit:git-pack-objects[1] to build "thin" pack, which records
390 objects in deltified form based on objects contained in these
391 excluded commits to reduce network traffic.
395 Only useful with '--objects'; print the object IDs that are not
400 Only show the given revs, but do not traverse their ancestors.
404 Overrides a previous --no-walk.