git-commit.sh

   1 #!/bin/sh
   2 #
   3 # Copyright (c) 2005 Linus Torvalds
   4 # Copyright (c) 2006 Junio C Hamano
   5
   6 USAGE='[-a] [-i] [-s] [-v] [--no-verify] [-m <message> | -F <logfile> | (-C|-c) <commit>] [-e] [--author <author>] [<path>...]'
   7 SUBDIRECTORY_OK=Yes
   8 . git-sh-setup
   9
  10 git-rev-parse --verify HEAD >/dev/null 2>&1 || initial_commit=t
  11 branch=$(GIT_DIR="$GIT_DIR" git-symbolic-ref HEAD)
  12
  13 case "$0" in
  14 *status)
  15         status_only=t
  16         unmerged_ok_if_status=--unmerged ;;
  17 *commit)
  18         status_only=
  19         unmerged_ok_if_status= ;;
  20 esac
  21
  22 refuse_partial () {
  23         echo >&2 "$1"
  24         echo >&2 "You might have meant to say 'git commit -i paths...', perhaps?"
  25         exit 1
  26 }
  27
  28 THIS_INDEX="$GIT_DIR/index"
  29 NEXT_INDEX="$GIT_DIR/next-index$$"
  30 rm -f "$NEXT_INDEX"
  31 save_index () {
  32         cp "$THIS_INDEX" "$NEXT_INDEX"
  33 }
  34
  35 report () {
  36   header="#
  37 # $1:
  38 #   ($2)
  39 #
  40 "
  41   trailer=""
  42   while read status name newname
  43   do
  44     printf '%s' "$header"
  45     header=""
  46     trailer="#
  47 "
  48     case "$status" in
  49     M ) echo "# modified: $name";;
  50     D*) echo "# deleted:  $name";;
  51     T ) echo "# typechange: $name";;
  52     C*) echo "# copied: $name -> $newname";;
  53     R*) echo "# renamed: $name -> $newname";;
  54     A*) echo "# new file: $name";;
  55     U ) echo "# unmerged: $name";;
  56     esac
  57   done
  58   printf '%s' "$trailer"
  59   [ "$header" ]
  60 }
  61
  62 run_status () {
  63     (
  64         # We always show status for the whole tree.
  65         cd "$TOP"
  66
  67         # If TMP_INDEX is defined, that means we are doing
  68         # "--only" partial commit, and that index file is used
  69         # to build the tree for the commit.  Otherwise, if
  70         # NEXT_INDEX exists, that is the index file used to
  71         # make the commit.  Otherwise we are using as-is commit
  72         # so the regular index file is what we use to compare.
  73         if test '' != "$TMP_INDEX"
  74         then
  75             GIT_INDEX_FILE="$TMP_INDEX"
  76             export GIT_INDEX_FILE
  77         elif test -f "$NEXT_INDEX"
  78         then
  79             GIT_INDEX_FILE="$NEXT_INDEX"
  80             export GIT_INDEX_FILE
  81         fi
  82
  83         case "$branch" in
  84         refs/heads/master) ;;
  85         *)  echo "# On branch $branch" ;;
  86         esac
  87
  88         if test -z "$initial_commit"
  89         then
  90             git-diff-index -M --cached --name-status \
  91                 --diff-filter=MDTCRA HEAD |
  92             sed -e '
  93                     s/\\/\\\\/g
  94                     s/ /\\ /g
  95             ' |
  96             report "Updated but not checked in" "will commit"
  97             committable="$?"
  98         else
  99             echo '#
 100 # Initial commit
 101 #'
 102             git-ls-files |
 103             sed -e '
 104                     s/\\/\\\\/g
 105                     s/ /\\ /g
 106                     s/^/A /
 107             ' |
 108             report "Updated but not checked in" "will commit"
 109
 110             committable="$?"
 111         fi
 112
 113         git-diff-files  --name-status |
 114         sed -e '
 115                 s/\\/\\\\/g
 116                 s/ /\\ /g
 117         ' |
 118         report "Changed but not updated" \
 119             "use git-update-index to mark for commit"
 120
 121         if test -f "$GIT_DIR/info/exclude"
 122         then
 123             git-ls-files -z --others --directory \
 124                 --exclude-from="$GIT_DIR/info/exclude" \
 125                 --exclude-per-directory=.gitignore
 126         else
 127             git-ls-files -z --others --directory \
 128                 --exclude-per-directory=.gitignore
 129         fi |
 130         perl -e '$/ = "\0";
 131             my $shown = 0;
 132             while (<>) {
 133                 chomp;
 134                 s|\\|\\\\|g;
 135                 s|\t|\\t|g;
 136                 s|\n|\\n|g;
 137                 s/^/#   /;
 138                 if (!$shown) {
 139                     print "#\n# Untracked files:\n";
 140                     print "#   (use \"git add\" to add to commit)\n";
 141                     print "#\n";
 142                     $shown = 1;
 143                 }
 144                 print "$_\n";
 145             }
 146         '
 147
 148         if test -n "$verbose"
 149         then
 150             git-diff-index --cached -M -p --diff-filter=MDTCRA HEAD
 151         fi
 152         case "$committable" in
 153         0)
 154             echo "nothing to commit"
 155             exit 1
 156         esac
 157         exit 0
 158     )
 159 }
 160
 161 trap '
 162         test -z "$TMP_INDEX" || {
 163                 test -f "$TMP_INDEX" && rm -f "$TMP_INDEX"
 164         }
 165         rm -f "$NEXT_INDEX"
 166 ' 0
 167
 168 ################################################################
 169 # Command line argument parsing and sanity checking
 170
 171 all=
 172 also=
 173 only=
 174 logfile=
 175 use_commit=
 176 no_edit=
 177 log_given=
 178 log_message=
 179 verify=t
 180 verbose=
 181 signoff=
 182 force_author=
 183 while case "$#" in 0) break;; esac
 184 do
 185   case "$1" in
 186   -F|--F|-f|--f|--fi|--fil|--file)
 187       case "$#" in 1) usage ;; esac
 188       shift
 189       no_edit=t
 190       log_given=t$log_given
 191       logfile="$1"
 192       shift
 193       ;;
 194   -F*|-f*)
 195       no_edit=t
 196       log_given=t$log_given
 197       logfile=`expr "$1" : '-[Ff]\(.*\)'`
 198       shift
 199       ;;
 200   --F=*|--f=*|--fi=*|--fil=*|--file=*)
 201       no_edit=t
 202       log_given=t$log_given
 203       logfile=`expr "$1" : '-[^=]*=\(.*\)'`
 204       shift
 205       ;;
 206   -a|--a|--al|--all)
 207       all=t
 208       shift
 209       ;;
 210   --au=*|--aut=*|--auth=*|--autho=*|--author=*)
 211       force_author=`expr "$1" : '-[^=]*=\(.*\)'`
 212       shift
 213       ;;
 214   --au|--aut|--auth|--autho|--author)
 215       case "$#" in 1) usage ;; esac
 216       shift
 217       force_author="$1"
 218       shift
 219       ;;
 220   -e|--e|--ed|--edi|--edit)
 221       no_edit=
 222       shift
 223       ;;
 224   -i|--i|--in|--inc|--incl|--inclu|--includ|--include)
 225       also=t
 226       shift
 227       ;;
 228   -o|--o|--on|--onl|--only)
 229       only=t
 230       shift
 231       ;;
 232   -m|--m|--me|--mes|--mess|--messa|--messag|--message)
 233       case "$#" in 1) usage ;; esac
 234       shift
 235       log_given=t$log_given
 236       log_message="$1"
 237       no_edit=t
 238       shift
 239       ;;
 240   -m*)
 241       log_given=t$log_given
 242       log_message=`expr "$1" : '-m\(.*\)'`
 243       no_edit=t
 244       shift
 245       ;;
 246   --m=*|--me=*|--mes=*|--mess=*|--messa=*|--messag=*|--message=*)
 247       log_given=t$log_given
 248       log_message=`expr "$1" : '-[^=]*=\(.*\)'`
 249       no_edit=t
 250       shift
 251       ;;
 252   -n|--n|--no|--no-|--no-v|--no-ve|--no-ver|--no-veri|--no-verif|--no-verify)
 253       verify=
 254       shift
 255       ;;
 256   -c)
 257       case "$#" in 1) usage ;; esac
 258       shift
 259       log_given=t$log_given
 260       use_commit="$1"
 261       no_edit=
 262       shift
 263       ;;
 264   --ree=*|--reed=*|--reedi=*|--reedit=*|--reedit-=*|--reedit-m=*|\
 265   --reedit-me=*|--reedit-mes=*|--reedit-mess=*|--reedit-messa=*|\
 266   --reedit-messag=*|--reedit-message=*)
 267       log_given=t$log_given
 268       use_commit=`expr "$1" : '-[^=]*=\(.*\)'`
 269       no_edit=
 270       shift
 271       ;;
 272   --ree|--reed|--reedi|--reedit|--reedit-|--reedit-m|--reedit-me|\
 273   --reedit-mes|--reedit-mess|--reedit-messa|--reedit-messag|--reedit-message)
 274       case "$#" in 1) usage ;; esac
 275       shift
 276       log_given=t$log_given
 277       use_commit="$1"
 278       no_edit=
 279       shift
 280       ;;
 281   -C)
 282       case "$#" in 1) usage ;; esac
 283       shift
 284       log_given=t$log_given
 285       use_commit="$1"
 286       no_edit=t
 287       shift
 288       ;;
 289   --reu=*|--reus=*|--reuse=*|--reuse-=*|--reuse-m=*|--reuse-me=*|\
 290   --reuse-mes=*|--reuse-mess=*|--reuse-messa=*|--reuse-messag=*|\
 291   --reuse-message=*)
 292       log_given=t$log_given
 293       use_commit=`expr "$1" : '-[^=]*=\(.*\)'`
 294       no_edit=t
 295       shift
 296       ;;
 297   --reu|--reus|--reuse|--reuse-|--reuse-m|--reuse-me|--reuse-mes|\
 298   --reuse-mess|--reuse-messa|--reuse-messag|--reuse-message)
 299       case "$#" in 1) usage ;; esac
 300       shift
 301       log_given=t$log_given
 302       use_commit="$1"
 303       no_edit=t
 304       shift
 305       ;;
 306   -s|--s|--si|--sig|--sign|--signo|--signof|--signoff)
 307       signoff=t
 308       shift
 309       ;;
 310   -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
 311       verbose=t
 312       shift
 313       ;;
 314   --)
 315       shift
 316       break
 317       ;;
 318   -*)
 319       usage
 320       ;;
 321   *)
 322       break
 323       ;;
 324   esac
 325 done
 326
 327 ################################################################
 328 # Sanity check options
 329
 330 case "$log_given" in
 331 tt*)
 332   die "Only one of -c/-C/-F/-m can be used." ;;
 333 esac
 334
 335 case "$#,$also$only" in
 336 *,tt)
 337   die "Only one of --include/--only can be used." ;;
 338 0,t)
 339   die "No paths with --include/--only does not make sense." ;;
 340 0,)
 341   ;;
 342 *,)
 343   echo >&2 "assuming --include paths..."
 344   also=t
 345   # Later when switch the defaults, we will replace them with these:
 346   # echo >&2 "assuming --only paths..."
 347   # also=
 348
 349   # If we are going to launch an editor, the message won't be
 350   # shown without this...
 351   test -z "$log_given$status_only" && sleep 1
 352   ;;
 353 esac
 354 unset only
 355 case "$all,$also,$#" in
 356 t,t,*)
 357         die "Cannot use -a and -i at the same time." ;;
 358 t,,[1-9]*)
 359         die "Paths with -a does not make sense." ;;
 360 ,t,0)
 361         die "No paths with -i does not make sense." ;;
 362 esac
 363
 364 ################################################################
 365 # Prepare index to have a tree to be committed
 366
 367 TOP=`git-rev-parse --show-cdup`
 368 if test -z "$TOP"
 369 then
 370         TOP=./
 371 fi
 372
 373 case "$all,$also" in
 374 t,)
 375         save_index &&
 376         (
 377                 cd "$TOP"
 378                 GIT_INDEX_FILE="$NEXT_INDEX"
 379                 export GIT_INDEX_FILE
 380                 git-diff-files --name-only -z |
 381                 git-update-index --remove -z --stdin
 382         )
 383         ;;
 384 ,t)
 385         save_index &&
 386         git-diff-files --name-only -z -- "$@"  |
 387         (
 388                 cd "$TOP"
 389                 GIT_INDEX_FILE="$NEXT_INDEX"
 390                 export GIT_INDEX_FILE
 391                 git-update-index --remove -z --stdin
 392         )
 393         ;;
 394 ,)
 395         case "$#" in
 396         0)
 397             ;; # commit as-is
 398         *)
 399             if test -f "$GIT_DIR/MERGE_HEAD"
 400             then
 401                 refuse_partial "Cannot do a partial commit during a merge."
 402             fi
 403             TMP_INDEX="$GIT_DIR/tmp-index$$"
 404             if test -z "$initial_commit"
 405             then
 406                 # make sure index is clean at the specified paths, or
 407                 # they are additions.
 408                 dirty_in_index=`git-diff-index --cached --name-status \
 409                         --diff-filter=DMTU HEAD -- "$@"`
 410                 test -z "$dirty_in_index" ||
 411                 refuse_partial "Different in index and the last commit:
 412 $dirty_in_index"
 413             fi
 414             commit_only=`git-ls-files -- "$@"`
 415
 416             # Build the temporary index and update the real index
 417             # the same way.
 418             if test -z "$initial_commit"
 419             then
 420                 cp "$THIS_INDEX" "$TMP_INDEX"
 421                 GIT_INDEX_FILE="$TMP_INDEX" git-read-tree -m HEAD
 422             else
 423                     rm -f "$TMP_INDEX"
 424             fi || exit
 425
 426             echo "$commit_only" |
 427             GIT_INDEX_FILE="$TMP_INDEX" \
 428             git-update-index --add --remove --stdin &&
 429
 430             save_index &&
 431             echo "$commit_only" |
 432             (
 433                 GIT_INDEX_FILE="$NEXT_INDEX"
 434                 export GIT_INDEX_FILE
 435                 git-update-index --remove --stdin
 436             ) || exit
 437             ;;
 438         esac
 439         ;;
 440 esac
 441
 442 ################################################################
 443 # If we do as-is commit, the index file will be THIS_INDEX,
 444 # otherwise NEXT_INDEX after we make this commit.  We leave
 445 # the index as is if we abort.
 446
 447 if test -f "$NEXT_INDEX"
 448 then
 449         USE_INDEX="$NEXT_INDEX"
 450 else
 451         USE_INDEX="$THIS_INDEX"
 452 fi
 453
 454 GIT_INDEX_FILE="$USE_INDEX" \
 455     git-update-index -q $unmerged_ok_if_status --refresh || exit
 456
 457 ################################################################
 458 # If the request is status, just show it and exit.
 459
 460 case "$0" in
 461 *status)
 462         run_status
 463         exit $?
 464 esac
 465
 466 ################################################################
 467 # Grab commit message, write out tree and make commit.
 468
 469 if test t = "$verify" && test -x "$GIT_DIR"/hooks/pre-commit
 470 then
 471         if test "$TMP_INDEX"
 472         then
 473                 GIT_INDEX_FILE="$TMP_INDEX" "$GIT_DIR"/hooks/pre-commit
 474         else
 475                 GIT_INDEX_FILE="$USE_INDEX" "$GIT_DIR"/hooks/pre-commit
 476         fi || exit
 477 fi
 478
 479 if test "$log_message" != ''
 480 then
 481         echo "$log_message"
 482 elif test "$logfile" != ""
 483 then
 484         if test "$logfile" = -
 485         then
 486                 test -t 0 &&
 487                 echo >&2 "(reading log message from standard input)"
 488                 cat
 489         else
 490                 cat <"$logfile"
 491         fi
 492 elif test "$use_commit" != ""
 493 then
 494         git-cat-file commit "$use_commit" | sed -e '1,/^$/d'
 495 elif test -f "$GIT_DIR/MERGE_HEAD" && test -f "$GIT_DIR/MERGE_MSG"
 496 then
 497         cat "$GIT_DIR/MERGE_MSG"
 498 fi | git-stripspace >"$GIT_DIR"/COMMIT_EDITMSG
 499
 500 case "$signoff" in
 501 t)
 502         {
 503                 echo
 504                 git-var GIT_COMMITTER_IDENT | sed -e '
 505                         s/>.*/>/
 506                         s/^/Signed-off-by: /
 507                 '
 508         } >>"$GIT_DIR"/COMMIT_EDITMSG
 509         ;;
 510 esac
 511
 512 if [ -f "$GIT_DIR/MERGE_HEAD" ]; then
 513         echo "#"
 514         echo "# It looks like you may be committing a MERGE."
 515         echo "# If this is not correct, please remove the file"
 516         echo "# $GIT_DIR/MERGE_HEAD"
 517         echo "# and try again"
 518         echo "#"
 519 fi >>"$GIT_DIR"/COMMIT_EDITMSG
 520
 521 # Author
 522 if test '' != "$force_author"
 523 then
 524         GIT_AUTHOR_NAME=`expr "$force_author" : '\(.*[^ ]\) *<.*'` &&
 525         GIT_AUTHOR_EMAIL=`expr "$force_author" : '.*\(<.*\)'` &&
 526         test '' != "$GIT_AUTHOR_NAME" &&
 527         test '' != "$GIT_AUTHOR_EMAIL" ||
 528         die "malformatted --author parameter"
 529         export GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL
 530 elif test '' != "$use_commit"
 531 then
 532         pick_author_script='
 533         /^author /{
 534                 s/'\''/'\''\\'\'\''/g
 535                 h
 536                 s/^author \([^<]*\) <[^>]*> .*$/\1/
 537                 s/'\''/'\''\'\'\''/g
 538                 s/.*/GIT_AUTHOR_NAME='\''&'\''/p
 539
 540                 g
 541                 s/^author [^<]* <\([^>]*\)> .*$/\1/
 542                 s/'\''/'\''\'\'\''/g
 543                 s/.*/GIT_AUTHOR_EMAIL='\''&'\''/p
 544
 545                 g
 546                 s/^author [^<]* <[^>]*> \(.*\)$/\1/
 547                 s/'\''/'\''\'\'\''/g
 548                 s/.*/GIT_AUTHOR_DATE='\''&'\''/p
 549
 550                 q
 551         }
 552         '
 553         set_author_env=`git-cat-file commit "$use_commit" |
 554         LANG=C LC_ALL=C sed -ne "$pick_author_script"`
 555         eval "$set_author_env"
 556         export GIT_AUTHOR_NAME
 557         export GIT_AUTHOR_EMAIL
 558         export GIT_AUTHOR_DATE
 559 fi
 560
 561 PARENTS="-p HEAD"
 562 if test -z "$initial_commit"
 563 then
 564         if [ -f "$GIT_DIR/MERGE_HEAD" ]; then
 565                 PARENTS="-p HEAD "`sed -e 's/^/-p /' "$GIT_DIR/MERGE_HEAD"`
 566         fi
 567 else
 568         if [ -z "$(git-ls-files)" ]; then
 569                 echo >&2 Nothing to commit
 570                 exit 1
 571         fi
 572         PARENTS=""
 573 fi
 574
 575 run_status >>"$GIT_DIR"/COMMIT_EDITMSG
 576 if [ "$?" != "0" -a ! -f "$GIT_DIR/MERGE_HEAD" ]
 577 then
 578         rm -f "$GIT_DIR/COMMIT_EDITMSG"
 579         run_status
 580         exit 1
 581 fi
 582 case "$no_edit" in
 583 '')
 584         case "${VISUAL:-$EDITOR},$TERM" in
 585         ,dumb)
 586                 echo >&2 "Terminal is dumb but no VISUAL nor EDITOR defined."
 587                 echo >&2 "Please supply the commit log message using either"
 588                 echo >&2 "-m or -F option.  A boilerplate log message has"
 589                 echo >&2 "been prepared in $GIT_DIR/COMMIT_EDITMSG"
 590                 exit 1
 591                 ;;
 592         esac
 593         ${VISUAL:-${EDITOR:-vi}} "$GIT_DIR/COMMIT_EDITMSG"
 594         ;;
 595 esac
 596
 597 case "$verify" in
 598 t)
 599         if test -x "$GIT_DIR"/hooks/commit-msg
 600         then
 601                 "$GIT_DIR"/hooks/commit-msg "$GIT_DIR"/COMMIT_EDITMSG || exit
 602         fi
 603 esac
 604
 605 sed -e '
 606     /^diff --git a\/.*/{
 607         s///
 608         q
 609     }
 610     /^#/d
 611 ' "$GIT_DIR"/COMMIT_EDITMSG |
 612 git-stripspace >"$GIT_DIR"/COMMIT_MSG
 613
 614 if cnt=`grep -v -i '^Signed-off-by' "$GIT_DIR"/COMMIT_MSG |
 615         git-stripspace |
 616         wc -l` &&
 617    test 0 -lt $cnt
 618 then
 619         if test -z "$TMP_INDEX"
 620         then
 621                 tree=$(GIT_INDEX_FILE="$USE_INDEX" git-write-tree)
 622         else
 623                 tree=$(GIT_INDEX_FILE="$TMP_INDEX" git-write-tree) &&
 624                 rm -f "$TMP_INDEX"
 625         fi &&
 626         commit=$(cat "$GIT_DIR"/COMMIT_MSG | git-commit-tree $tree $PARENTS) &&
 627         git-update-ref HEAD $commit $current &&
 628         rm -f -- "$GIT_DIR/MERGE_HEAD" &&
 629         if test -f "$NEXT_INDEX"
 630         then
 631                 mv "$NEXT_INDEX" "$THIS_INDEX"
 632         else
 633                 : ;# happy
 634         fi
 635 else
 636         echo >&2 "* no commit message?  aborting commit."
 637         false
 638 fi
 639 ret="$?"
 640 rm -f "$GIT_DIR/COMMIT_MSG" "$GIT_DIR/COMMIT_EDITMSG"
 641 git-rerere
 642
 643 if test -x "$GIT_DIR"/hooks/post-commit && test "$ret" = 0
 644 then
 645         "$GIT_DIR"/hooks/post-commit
 646 fi
 647 exit "$ret"