pkt-line.h

   1 #ifndef PKTLINE_H
   2 #define PKTLINE_H
   3
   4 #include "git-compat-util.h"
   5 #include "strbuf.h"
   6 #include "sideband.h"
   7
   8 /*
   9  * Write a packetized stream, where each line is preceded by
  10  * its length (including the header) as a 4-byte hex number.
  11  * A length of 'zero' means end of stream (and a length of 1-3
  12  * would be an error).
  13  *
  14  * This is all pretty stupid, but we use this packetized line
  15  * format to make a streaming format possible without ever
  16  * over-running the read buffers. That way we'll never read
  17  * into what might be the pack data (which should go to another
  18  * process entirely).
  19  *
  20  * The writing side could use stdio, but since the reading
  21  * side can't, we stay with pure read/write interfaces.
  22  */
  23 void packet_flush(int fd);
  24 void packet_delim(int fd);
  25 void packet_response_end(int fd);
  26 void packet_write_fmt(int fd, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
  27 void packet_buf_flush(struct strbuf *buf);
  28 void packet_buf_delim(struct strbuf *buf);
  29 void set_packet_header(char *buf, int size);
  30 void packet_write(int fd_out, const char *buf, size_t size);
  31 void packet_buf_write(struct strbuf *buf, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
  32 int packet_flush_gently(int fd);
  33 int packet_write_fmt_gently(int fd, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
  34 int write_packetized_from_fd_no_flush(int fd_in, int fd_out);
  35 int write_packetized_from_buf_no_flush(const char *src_in, size_t len, int fd_out);
  36
  37 /*
  38  * Stdio versions of packet_write functions. When mixing these with fd
  39  * based functions, take care to call fflush(3) before doing fd writes or
  40  * closing the fd.
  41  */
  42 void packet_fwrite(FILE *f, const char *buf, size_t size);
  43 void packet_fwrite_fmt(FILE *f, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
  44
  45 /* packet_fflush writes a flush packet and flushes the stdio buffer of f */
  46 void packet_fflush(FILE *f);
  47
  48 /*
  49  * Read a packetized line into the buffer, which must be at least size bytes
  50  * long. The return value specifies the number of bytes read into the buffer.
  51  *
  52  * If options does not contain PACKET_READ_GENTLE_ON_EOF, we will die under any
  53  * of the following conditions:
  54  *
  55  *   1. Read error from descriptor.
  56  *
  57  *   2. Protocol error from the remote (e.g., bogus length characters).
  58  *
  59  *   3. Receiving a packet larger than "size" bytes.
  60  *
  61  *   4. Truncated output from the remote (e.g., we expected a packet but got
  62  *      EOF, or we got a partial packet followed by EOF).
  63  *
  64  * If options does contain PACKET_READ_GENTLE_ON_EOF, we will not die on
  65  * condition 4 (truncated input), but instead return -1. However, we will still
  66  * die for the other 3 conditions.
  67  *
  68  * If options contains PACKET_READ_CHOMP_NEWLINE, a trailing newline (if
  69  * present) is removed from the buffer before returning.
  70  *
  71  * If options contains PACKET_READ_DIE_ON_ERR_PACKET, it dies when it sees an
  72  * ERR packet.
  73  *
  74  * If options contains PACKET_READ_GENTLE_ON_READ_ERROR, we will not die
  75  * on read errors, but instead return -1.  However, we may still die on an
  76  * ERR packet (if requested).
  77  */
  78 #define PACKET_READ_GENTLE_ON_EOF        (1u<<0)
  79 #define PACKET_READ_CHOMP_NEWLINE        (1u<<1)
  80 #define PACKET_READ_DIE_ON_ERR_PACKET    (1u<<2)
  81 #define PACKET_READ_GENTLE_ON_READ_ERROR (1u<<3)
  82 #define PACKET_READ_REDACT_URI_PATH      (1u<<4)
  83 int packet_read(int fd, char *buffer, unsigned size, int options);
  84
  85 /*
  86  * Convert a four hex digit packet line length header into its numeric
  87  * representation.
  88  *
  89  * If lenbuf_hex contains non-hex characters, return -1. Otherwise, return the
  90  * numeric value of the length header.
  91  */
  92 int packet_length(const char lenbuf_hex[4]);
  93
  94 /*
  95  * Read a packetized line into a buffer like the 'packet_read()' function but
  96  * returns an 'enum packet_read_status' which indicates the status of the read.
  97  * The number of bytes read will be assigned to *pktlen if the status of the
  98  * read was 'PACKET_READ_NORMAL'.
  99  *
 100  * If src_buffer and *src_buffer are not NULL, it should point to a buffer
 101  * containing the packet data to parse, of at least *src_len bytes.  After the
 102  * function returns, src_buf will be incremented and src_len decremented by the
 103  * number of bytes consumed.
 104  *
 105  * If src_buffer (or *src_buffer) is NULL, then data is read from the
 106  * descriptor "fd".
 107  */
 108 enum packet_read_status {
 109         PACKET_READ_EOF,
 110         PACKET_READ_NORMAL,
 111         PACKET_READ_FLUSH,
 112         PACKET_READ_DELIM,
 113         PACKET_READ_RESPONSE_END,
 114 };
 115 enum packet_read_status packet_read_with_status(int fd, char **src_buffer,
 116                                                 size_t *src_len, char *buffer,
 117                                                 unsigned size, int *pktlen,
 118                                                 int options);
 119
 120 /*
 121  * Convenience wrapper for packet_read that is not gentle, and sets the
 122  * CHOMP_NEWLINE option. The return value is NULL for a flush packet,
 123  * and otherwise points to a static buffer (that may be overwritten by
 124  * subsequent calls). If the size parameter is not NULL, the length of the
 125  * packet is written to it.
 126  */
 127 char *packet_read_line(int fd, int *size);
 128
 129 /*
 130  * Convenience wrapper for packet_read that sets the PACKET_READ_GENTLE_ON_EOF
 131  * and CHOMP_NEWLINE options. The return value specifies the number of bytes
 132  * read into the buffer or -1 on truncated input. If the *dst_line parameter
 133  * is not NULL it will return NULL for a flush packet or when the number of
 134  * bytes copied is zero and otherwise points to a static buffer (that may be
 135  * overwritten by subsequent calls). If the size parameter is not NULL, the
 136  * length of the packet is written to it.
 137  */
 138 int packet_read_line_gently(int fd, int *size, char **dst_line);
 139
 140 /*
 141  * Reads a stream of variable sized packets until a flush packet is detected.
 142  */
 143 ssize_t read_packetized_to_strbuf(int fd_in, struct strbuf *sb_out, int options);
 144
 145 /*
 146  * Receive multiplexed output stream over git native protocol.
 147  * in_stream is the input stream from the remote, which carries data
 148  * in pkt_line format with band designator.  Demultiplex it into out
 149  * and err and return error appropriately.  Band #1 carries the
 150  * primary payload.  Things coming over band #2 is not necessarily
 151  * error; they are usually informative message on the standard error
 152  * stream, aka "verbose").  A message over band #3 is a signal that
 153  * the remote died unexpectedly.  A flush() concludes the stream.
 154  *
 155  * Returns SIDEBAND_FLUSH upon a normal conclusion, and SIDEBAND_PROTOCOL_ERROR
 156  * or SIDEBAND_REMOTE_ERROR if an error occurred.
 157  */
 158 int recv_sideband(const char *me, int in_stream, int out);
 159
 160 struct packet_reader {
 161         /* source file descriptor */
 162         int fd;
 163
 164         /* source buffer and its size */
 165         char *src_buffer;
 166         size_t src_len;
 167
 168         /* buffer that pkt-lines are read into and its size */
 169         char *buffer;
 170         unsigned buffer_size;
 171
 172         /* options to be used during reads */
 173         int options;
 174
 175         /* status of the last read */
 176         enum packet_read_status status;
 177
 178         /* length of data read during the last read */
 179         int pktlen;
 180
 181         /* the last line read */
 182         const char *line;
 183
 184         /* indicates if a line has been peeked */
 185         int line_peeked;
 186
 187         unsigned use_sideband : 1;
 188         const char *me;
 189
 190         /* hash algorithm in use */
 191         const struct git_hash_algo *hash_algo;
 192 };
 193
 194 /*
 195  * Initialize a 'struct packet_reader' object which is an
 196  * abstraction around the 'packet_read_with_status()' function.
 197  */
 198 void packet_reader_init(struct packet_reader *reader, int fd,
 199                         char *src_buffer, size_t src_len,
 200                         int options);
 201
 202 /*
 203  * Perform a packet read and return the status of the read.
 204  * The values of 'pktlen' and 'line' are updated based on the status of the
 205  * read as follows:
 206  *
 207  * PACKET_READ_ERROR: 'pktlen' is set to '-1' and 'line' is set to NULL
 208  * PACKET_READ_NORMAL: 'pktlen' is set to the number of bytes read
 209  *                     'line' is set to point at the read line
 210  * PACKET_READ_FLUSH: 'pktlen' is set to '0' and 'line' is set to NULL
 211  */
 212 enum packet_read_status packet_reader_read(struct packet_reader *reader);
 213
 214 /*
 215  * Peek the next packet line without consuming it and return the status.
 216  * The next call to 'packet_reader_read()' will perform a read of the same line
 217  * that was peeked, consuming the line.
 218  *
 219  * Peeking multiple times without calling 'packet_reader_read()' will return
 220  * the same result.
 221  */
 222 enum packet_read_status packet_reader_peek(struct packet_reader *reader);
 223
 224 #define DEFAULT_PACKET_MAX 1000
 225 #define LARGE_PACKET_MAX 65520
 226 #define LARGE_PACKET_DATA_MAX (LARGE_PACKET_MAX - 4)
 227 extern char packet_buffer[LARGE_PACKET_MAX];
 228
 229 struct packet_writer {
 230         int dest_fd;
 231         unsigned use_sideband : 1;
 232 };
 233
 234 void packet_writer_init(struct packet_writer *writer, int dest_fd);
 235
 236 /* These functions die upon failure. */
 237 __attribute__((format (printf, 2, 3)))
 238 void packet_writer_write(struct packet_writer *writer, const char *fmt, ...);
 239 __attribute__((format (printf, 2, 3)))
 240 void packet_writer_error(struct packet_writer *writer, const char *fmt, ...);
 241 void packet_writer_delim(struct packet_writer *writer);
 242 void packet_writer_flush(struct packet_writer *writer);
 243
 244 #endif