Rename the test trash directory to contain spaces.
[git/bdonlan.git] / git-rebase.sh
blobc43afe51abe065950f3d3ba2aa71bb157dd04bc8
1 #!/bin/sh
3 # Copyright (c) 2005 Junio C Hamano.
6 USAGE='[--interactive | -i] [-v] [--onto <newbase>] <upstream> [<branch>]'
7 LONG_USAGE='git-rebase replaces <branch> with a new branch of the
8 same name. When the --onto option is provided the new branch starts
9 out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
10 It then attempts to create a new commit for each commit from the original
11 <branch> that does not exist in the <upstream> branch.
13 It is possible that a merge failure will prevent this process from being
14 completely automatic. You will have to resolve any such merge failure
15 and run git rebase --continue. Another option is to bypass the commit
16 that caused the merge failure with git rebase --skip. To restore the
17 original <branch> and remove the .dotest working files, use the command
18 git rebase --abort instead.
20 Note that if <branch> is not specified on the command line, the
21 currently checked out branch is used.
23 Example: git-rebase master~1 topic
25 A---B---C topic A'\''--B'\''--C'\'' topic
26 / --> /
27 D---E---F---G master D---E---F---G master
30 SUBDIRECTORY_OK=Yes
31 OPTIONS_SPEC=
32 . git-sh-setup
33 set_reflog_action rebase
34 require_work_tree
35 cd_to_toplevel
37 RESOLVEMSG="
38 When you have resolved this problem run \"git rebase --continue\".
39 If you would prefer to skip this patch, instead run \"git rebase --skip\".
40 To restore the original branch and stop rebasing run \"git rebase --abort\".
42 unset newbase
43 strategy=recursive
44 do_merge=
45 dotest=$GIT_DIR/.dotest-merge
46 prec=4
47 verbose=
48 git_am_opt=
50 continue_merge () {
51 test -n "$prev_head" || die "prev_head must be defined"
52 test -d "$dotest" || die "$dotest directory does not exist"
54 unmerged=$(git ls-files -u)
55 if test -n "$unmerged"
56 then
57 echo "You still have unmerged paths in your index"
58 echo "did you forget to use git add?"
59 die "$RESOLVEMSG"
62 cmt=`cat "$dotest/current"`
63 if ! git diff-index --quiet HEAD --
64 then
65 if ! git commit --no-verify -C "$cmt"
66 then
67 echo "Commit failed, please do not call \"git commit\""
68 echo "directly, but instead do one of the following: "
69 die "$RESOLVEMSG"
71 printf "Committed: %0${prec}d " $msgnum
72 else
73 printf "Already applied: %0${prec}d " $msgnum
75 git rev-list --pretty=oneline -1 "$cmt" | sed -e 's/^[^ ]* //'
77 prev_head=`git rev-parse HEAD^0`
78 # save the resulting commit so we can read-tree on it later
79 echo "$prev_head" > "$dotest/prev_head"
81 # onto the next patch:
82 msgnum=$(($msgnum + 1))
83 echo "$msgnum" >"$dotest/msgnum"
86 call_merge () {
87 cmt="$(cat "$dotest/cmt.$1")"
88 echo "$cmt" > "$dotest/current"
89 hd=$(git rev-parse --verify HEAD)
90 cmt_name=$(git symbolic-ref HEAD 2> /dev/null || echo HEAD)
91 msgnum=$(cat "$dotest/msgnum")
92 end=$(cat "$dotest/end")
93 eval GITHEAD_$cmt='"${cmt_name##refs/heads/}~$(($end - $msgnum))"'
94 eval GITHEAD_$hd='$(cat "$dotest/onto_name")'
95 export GITHEAD_$cmt GITHEAD_$hd
96 git-merge-$strategy "$cmt^" -- "$hd" "$cmt"
97 rv=$?
98 case "$rv" in
100 unset GITHEAD_$cmt GITHEAD_$hd
101 return
104 git rerere
105 die "$RESOLVEMSG"
108 echo "Strategy: $rv $strategy failed, try another" 1>&2
109 die "$RESOLVEMSG"
112 die "Unknown exit code ($rv) from command:" \
113 "git-merge-$strategy $cmt^ -- HEAD $cmt"
115 esac
118 move_to_original_branch () {
119 test -z "$head_name" &&
120 head_name="$(cat "$dotest"/head-name)" &&
121 onto="$(cat "$dotest"/onto)" &&
122 orig_head="$(cat "$dotest"/orig-head)"
123 case "$head_name" in
124 refs/*)
125 message="rebase finished: $head_name onto $onto"
126 git update-ref -m "$message" \
127 $head_name $(git rev-parse HEAD) $orig_head &&
128 git symbolic-ref HEAD $head_name ||
129 die "Could not move back to $head_name"
131 esac
134 finish_rb_merge () {
135 move_to_original_branch
136 rm -r "$dotest"
137 echo "All done."
140 is_interactive () {
141 test -f "$dotest"/interactive ||
142 while :; do case $#,"$1" in 0,|*,-i|*,--interactive) break ;; esac
143 shift
144 done && test -n "$1"
147 is_interactive "$@" && exec git-rebase--interactive "$@"
149 while test $# != 0
151 case "$1" in
152 --continue)
153 git diff-files --quiet || {
154 echo "You must edit all merge conflicts and then"
155 echo "mark them as resolved using git add"
156 exit 1
158 if test -d "$dotest"
159 then
160 prev_head=$(cat "$dotest/prev_head")
161 end=$(cat "$dotest/end")
162 msgnum=$(cat "$dotest/msgnum")
163 onto=$(cat "$dotest/onto")
164 continue_merge
165 while test "$msgnum" -le "$end"
167 call_merge "$msgnum"
168 continue_merge
169 done
170 finish_rb_merge
171 exit
173 head_name=$(cat .dotest/head-name) &&
174 onto=$(cat .dotest/onto) &&
175 orig_head=$(cat .dotest/orig-head) &&
176 git am --resolved --3way --resolvemsg="$RESOLVEMSG" &&
177 move_to_original_branch
178 exit
180 --skip)
181 git reset --hard HEAD || exit $?
182 if test -d "$dotest"
183 then
184 git rerere clear
185 prev_head=$(cat "$dotest/prev_head")
186 end=$(cat "$dotest/end")
187 msgnum=$(cat "$dotest/msgnum")
188 msgnum=$(($msgnum + 1))
189 onto=$(cat "$dotest/onto")
190 while test "$msgnum" -le "$end"
192 call_merge "$msgnum"
193 continue_merge
194 done
195 finish_rb_merge
196 exit
198 head_name=$(cat .dotest/head-name) &&
199 onto=$(cat .dotest/onto) &&
200 orig_head=$(cat .dotest/orig-head) &&
201 git am -3 --skip --resolvemsg="$RESOLVEMSG" &&
202 move_to_original_branch
203 exit
205 --abort)
206 git rerere clear
207 if test -d "$dotest"
208 then
209 move_to_original_branch
210 elif test -d .dotest
211 then
212 dotest=.dotest
213 move_to_original_branch
214 else
215 die "No rebase in progress?"
217 git reset --hard $(cat "$dotest/orig-head")
218 rm -r "$dotest"
219 exit
221 --onto)
222 test 2 -le "$#" || usage
223 newbase="$2"
224 shift
226 -M|-m|--m|--me|--mer|--merg|--merge)
227 do_merge=t
229 -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
230 --strateg=*|--strategy=*|\
231 -s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
232 case "$#,$1" in
233 *,*=*)
234 strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
235 1,*)
236 usage ;;
238 strategy="$2"
239 shift ;;
240 esac
241 do_merge=t
243 -v|--verbose)
244 verbose=t
246 --whitespace=*)
247 git_am_opt="$git_am_opt $1"
249 -C*)
250 git_am_opt="$git_am_opt $1"
253 usage
256 break
258 esac
259 shift
260 done
262 # Make sure we do not have .dotest
263 if test -z "$do_merge"
264 then
265 if mkdir .dotest
266 then
267 rmdir .dotest
268 else
269 echo >&2 '
270 It seems that I cannot create a .dotest directory, and I wonder if you
271 are in the middle of patch application or another rebase. If that is not
272 the case, please rm -fr .dotest and run me again. I am stopping in case
273 you still have something valuable there.'
274 exit 1
276 else
277 if test -d "$dotest"
278 then
279 die "previous dotest directory $dotest still exists." \
280 'try git-rebase < --continue | --abort >'
284 # The tree must be really really clean.
285 git update-index --refresh || exit
286 diff=$(git diff-index --cached --name-status -r HEAD --)
287 case "$diff" in
288 ?*) echo "cannot rebase: your index is not up-to-date"
289 echo "$diff"
290 exit 1
292 esac
294 # The upstream head must be given. Make sure it is valid.
295 upstream_name="$1"
296 upstream=`git rev-parse --verify "${upstream_name}^0"` ||
297 die "invalid upstream $upstream_name"
299 # Make sure the branch to rebase onto is valid.
300 onto_name=${newbase-"$upstream_name"}
301 onto=$(git rev-parse --verify "${onto_name}^0") || exit
303 # If a hook exists, give it a chance to interrupt
304 if test -x "$GIT_DIR/hooks/pre-rebase"
305 then
306 "$GIT_DIR/hooks/pre-rebase" ${1+"$@"} || {
307 echo >&2 "The pre-rebase hook refused to rebase."
308 exit 1
312 # If the branch to rebase is given, that is the branch we will rebase
313 # $branch_name -- branch being rebased, or HEAD (already detached)
314 # $orig_head -- commit object name of tip of the branch before rebasing
315 # $head_name -- refs/heads/<that-branch> or "detached HEAD"
316 switch_to=
317 case "$#" in
319 # Is it "rebase other $branchname" or "rebase other $commit"?
320 branch_name="$2"
321 switch_to="$2"
323 if git show-ref --verify --quiet -- "refs/heads/$2" &&
324 branch=$(git rev-parse --verify "refs/heads/$2" 2>/dev/null)
325 then
326 head_name="refs/heads/$2"
327 elif branch=$(git rev-parse --verify "$2" 2>/dev/null)
328 then
329 head_name="detached HEAD"
330 else
331 usage
335 # Do not need to switch branches, we are already on it.
336 if branch_name=`git symbolic-ref -q HEAD`
337 then
338 head_name=$branch_name
339 branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
340 else
341 head_name="detached HEAD"
342 branch_name=HEAD ;# detached
344 branch=$(git rev-parse --verify "${branch_name}^0") || exit
346 esac
347 orig_head=$branch
349 # Now we are rebasing commits $upstream..$branch on top of $onto
351 # Check if we are already based on $onto with linear history,
352 # but this should be done only when upstream and onto are the same.
353 mb=$(git merge-base "$onto" "$branch")
354 if test "$upstream" = "$onto" && test "$mb" = "$onto" &&
355 # linear history?
356 ! git rev-list --parents "$onto".."$branch" | grep " .* " > /dev/null
357 then
358 # Lazily switch to the target branch if needed...
359 test -z "$switch_to" || git checkout "$switch_to"
360 echo >&2 "Current branch $branch_name is up to date."
361 exit 0
364 if test -n "$verbose"
365 then
366 echo "Changes from $mb to $onto:"
367 # We want color (if set), but no pager
368 GIT_PAGER='' git diff --stat --summary "$mb" "$onto"
371 # Detach HEAD and reset the tree
372 echo "First, rewinding head to replay your work on top of it..."
373 git checkout "$onto^0" >/dev/null 2>&1 ||
374 die "could not detach HEAD"
375 # git reset --hard "$onto^0"
377 # If the $onto is a proper descendant of the tip of the branch, then
378 # we just fast forwarded.
379 if test "$mb" = "$branch"
380 then
381 echo >&2 "Fast-forwarded $branch_name to $onto_name."
382 move_to_original_branch
383 exit 0
386 if test -z "$do_merge"
387 then
388 git format-patch -k --stdout --full-index --ignore-if-in-upstream \
389 "$upstream..$orig_head" |
390 git am $git_am_opt --rebasing --resolvemsg="$RESOLVEMSG" &&
391 move_to_original_branch
392 ret=$?
393 test 0 != $ret -a -d .dotest &&
394 echo $head_name > .dotest/head-name &&
395 echo $onto > .dotest/onto &&
396 echo $orig_head > .dotest/orig-head
397 exit $ret
400 # start doing a rebase with git-merge
401 # this is rename-aware if the recursive (default) strategy is used
403 mkdir -p "$dotest"
404 echo "$onto" > "$dotest/onto"
405 echo "$onto_name" > "$dotest/onto_name"
406 prev_head=$orig_head
407 echo "$prev_head" > "$dotest/prev_head"
408 echo "$orig_head" > "$dotest/orig-head"
409 echo "$head_name" > "$dotest/head-name"
411 msgnum=0
412 for cmt in `git rev-list --reverse --no-merges "$upstream..$orig_head"`
414 msgnum=$(($msgnum + 1))
415 echo "$cmt" > "$dotest/cmt.$msgnum"
416 done
418 echo 1 >"$dotest/msgnum"
419 echo $msgnum >"$dotest/end"
421 end=$msgnum
422 msgnum=1
424 while test "$msgnum" -le "$end"
426 call_merge "$msgnum"
427 continue_merge
428 done
430 finish_rb_merge