git-send-email: Add --thread option
[git/aroben.git] / git-rebase.sh
blob2aa3a011dbe31e5167534a8bf443ff27dd96b38f
1 #!/bin/sh
3 # Copyright (c) 2005 Junio C Hamano.
6 USAGE='[-v] [--onto <newbase>] <upstream> [<branch>]'
7 LONG_USAGE='git-rebase replaces <branch> with a new branch of the
8 same name. When the --onto option is provided the new branch starts
9 out with a HEAD equal to <newbase>, otherwise it is equal to <upstream>
10 It then attempts to create a new commit for each commit from the original
11 <branch> that does not exist in the <upstream> branch.
13 It is possible that a merge failure will prevent this process from being
14 completely automatic. You will have to resolve any such merge failure
15 and run git rebase --continue. Another option is to bypass the commit
16 that caused the merge failure with git rebase --skip. To restore the
17 original <branch> and remove the .dotest working files, use the command
18 git rebase --abort instead.
20 Note that if <branch> is not specified on the command line, the
21 currently checked out branch is used. You must be in the top
22 directory of your project to start (or continue) a rebase.
24 Example: git-rebase master~1 topic
26 A---B---C topic A'\''--B'\''--C'\'' topic
27 / --> /
28 D---E---F---G master D---E---F---G master
31 SUBDIRECTORY_OK=Yes
32 . git-sh-setup
33 set_reflog_action rebase
34 require_work_tree
35 cd_to_toplevel
37 RESOLVEMSG="
38 When you have resolved this problem run \"git rebase --continue\".
39 If you would prefer to skip this patch, instead run \"git rebase --skip\".
40 To restore the original branch and stop rebasing run \"git rebase --abort\".
42 unset newbase
43 strategy=recursive
44 do_merge=
45 dotest=$GIT_DIR/.dotest-merge
46 prec=4
47 verbose=
48 git_am_opt=
50 continue_merge () {
51 test -n "$prev_head" || die "prev_head must be defined"
52 test -d "$dotest" || die "$dotest directory does not exist"
54 unmerged=$(git-ls-files -u)
55 if test -n "$unmerged"
56 then
57 echo "You still have unmerged paths in your index"
58 echo "did you forget to use git add?"
59 die "$RESOLVEMSG"
62 if ! git-diff-index --quiet HEAD
63 then
64 if ! git-commit -C "`cat $dotest/current`"
65 then
66 echo "Commit failed, please do not call \"git commit\""
67 echo "directly, but instead do one of the following: "
68 die "$RESOLVEMSG"
70 printf "Committed: %0${prec}d" $msgnum
71 else
72 printf "Already applied: %0${prec}d" $msgnum
74 echo ' '`git-rev-list --pretty=oneline -1 HEAD | \
75 sed 's/^[a-f0-9]\+ //'`
77 prev_head=`git-rev-parse HEAD^0`
78 # save the resulting commit so we can read-tree on it later
79 echo "$prev_head" > "$dotest/prev_head"
81 # onto the next patch:
82 msgnum=$(($msgnum + 1))
83 echo "$msgnum" >"$dotest/msgnum"
86 call_merge () {
87 cmt="$(cat $dotest/cmt.$1)"
88 echo "$cmt" > "$dotest/current"
89 hd=$(git-rev-parse --verify HEAD)
90 cmt_name=$(git-symbolic-ref HEAD)
91 msgnum=$(cat $dotest/msgnum)
92 end=$(cat $dotest/end)
93 eval GITHEAD_$cmt='"${cmt_name##refs/heads/}~$(($end - $msgnum))"'
94 eval GITHEAD_$hd='"$(cat $dotest/onto_name)"'
95 export GITHEAD_$cmt GITHEAD_$hd
96 git-merge-$strategy "$cmt^" -- "$hd" "$cmt"
97 rv=$?
98 case "$rv" in
100 unset GITHEAD_$cmt GITHEAD_$hd
101 return
104 test -d "$GIT_DIR/rr-cache" && git-rerere
105 die "$RESOLVEMSG"
108 echo "Strategy: $rv $strategy failed, try another" 1>&2
109 die "$RESOLVEMSG"
112 die "Unknown exit code ($rv) from command:" \
113 "git-merge-$strategy $cmt^ -- HEAD $cmt"
115 esac
118 finish_rb_merge () {
119 rm -r "$dotest"
120 echo "All done."
123 while case "$#" in 0) break ;; esac
125 case "$1" in
126 --continue)
127 git-diff-files --quiet || {
128 echo "You must edit all merge conflicts and then"
129 echo "mark them as resolved using git add"
130 exit 1
132 if test -d "$dotest"
133 then
134 prev_head="`cat $dotest/prev_head`"
135 end="`cat $dotest/end`"
136 msgnum="`cat $dotest/msgnum`"
137 onto="`cat $dotest/onto`"
138 continue_merge
139 while test "$msgnum" -le "$end"
141 call_merge "$msgnum"
142 continue_merge
143 done
144 finish_rb_merge
145 exit
147 git am --resolved --3way --resolvemsg="$RESOLVEMSG"
148 exit
150 --skip)
151 if test -d "$dotest"
152 then
153 if test -d "$GIT_DIR/rr-cache"
154 then
155 git-rerere clear
157 prev_head="`cat $dotest/prev_head`"
158 end="`cat $dotest/end`"
159 msgnum="`cat $dotest/msgnum`"
160 msgnum=$(($msgnum + 1))
161 onto="`cat $dotest/onto`"
162 while test "$msgnum" -le "$end"
164 call_merge "$msgnum"
165 continue_merge
166 done
167 finish_rb_merge
168 exit
170 git am -3 --skip --resolvemsg="$RESOLVEMSG"
171 exit
173 --abort)
174 if test -d "$GIT_DIR/rr-cache"
175 then
176 git-rerere clear
178 if test -d "$dotest"
179 then
180 rm -r "$dotest"
181 elif test -d .dotest
182 then
183 rm -r .dotest
184 else
185 die "No rebase in progress?"
187 git reset --hard ORIG_HEAD
188 exit
190 --onto)
191 test 2 -le "$#" || usage
192 newbase="$2"
193 shift
195 -M|-m|--m|--me|--mer|--merg|--merge)
196 do_merge=t
198 -s=*|--s=*|--st=*|--str=*|--stra=*|--strat=*|--strate=*|\
199 --strateg=*|--strategy=*|\
200 -s|--s|--st|--str|--stra|--strat|--strate|--strateg|--strategy)
201 case "$#,$1" in
202 *,*=*)
203 strategy=`expr "z$1" : 'z-[^=]*=\(.*\)'` ;;
204 1,*)
205 usage ;;
207 strategy="$2"
208 shift ;;
209 esac
210 do_merge=t
212 -v|--verbose)
213 verbose=t
215 -C*)
216 git_am_opt=$1
217 shift
220 usage
223 break
225 esac
226 shift
227 done
229 # Make sure we do not have .dotest
230 if test -z "$do_merge"
231 then
232 if mkdir .dotest
233 then
234 rmdir .dotest
235 else
236 echo >&2 '
237 It seems that I cannot create a .dotest directory, and I wonder if you
238 are in the middle of patch application or another rebase. If that is not
239 the case, please rm -fr .dotest and run me again. I am stopping in case
240 you still have something valuable there.'
241 exit 1
243 else
244 if test -d "$dotest"
245 then
246 die "previous dotest directory $dotest still exists." \
247 'try git-rebase < --continue | --abort >'
251 # The tree must be really really clean.
252 git-update-index --refresh || exit
253 diff=$(git-diff-index --cached --name-status -r HEAD)
254 case "$diff" in
255 ?*) echo "cannot rebase: your index is not up-to-date"
256 echo "$diff"
257 exit 1
259 esac
261 # The upstream head must be given. Make sure it is valid.
262 upstream_name="$1"
263 upstream=`git rev-parse --verify "${upstream_name}^0"` ||
264 die "invalid upstream $upstream_name"
266 # Make sure the branch to rebase onto is valid.
267 onto_name=${newbase-"$upstream_name"}
268 onto=$(git-rev-parse --verify "${onto_name}^0") || exit
270 # If a hook exists, give it a chance to interrupt
271 if test -x "$GIT_DIR/hooks/pre-rebase"
272 then
273 "$GIT_DIR/hooks/pre-rebase" ${1+"$@"} || {
274 echo >&2 "The pre-rebase hook refused to rebase."
275 exit 1
279 # If the branch to rebase is given, first switch to it.
280 case "$#" in
282 branch_name="$2"
283 git-checkout "$2" || usage
286 if branch_name=`git symbolic-ref -q HEAD`
287 then
288 branch_name=`expr "z$branch_name" : 'zrefs/heads/\(.*\)'`
289 else
290 branch_name=HEAD ;# detached
293 esac
294 branch=$(git-rev-parse --verify "${branch_name}^0") || exit
296 # Now we are rebasing commits $upstream..$branch on top of $onto
298 # Check if we are already based on $onto, but this should be
299 # done only when upstream and onto are the same.
300 mb=$(git-merge-base "$onto" "$branch")
301 if test "$upstream" = "$onto" && test "$mb" = "$onto"
302 then
303 echo >&2 "Current branch $branch_name is up to date."
304 exit 0
307 if test -n "$verbose"
308 then
309 echo "Changes from $mb to $onto:"
310 # We want color (if set), but no pager
311 GIT_PAGER='' git-diff --stat --summary "$mb" "$onto"
314 # Rewind the head to "$onto"; this saves our current head in ORIG_HEAD.
315 echo "First, rewinding head to replay your work on top of it..."
316 git-reset --hard "$onto"
318 # If the $onto is a proper descendant of the tip of the branch, then
319 # we just fast forwarded.
320 if test "$mb" = "$branch"
321 then
322 echo >&2 "Fast-forwarded $branch_name to $onto_name."
323 exit 0
326 if test -z "$do_merge"
327 then
328 git-format-patch -k --stdout --full-index --ignore-if-in-upstream "$upstream"..ORIG_HEAD |
329 git am $git_am_opt --binary -3 -k --resolvemsg="$RESOLVEMSG"
330 exit $?
333 # start doing a rebase with git-merge
334 # this is rename-aware if the recursive (default) strategy is used
336 mkdir -p "$dotest"
337 echo "$onto" > "$dotest/onto"
338 echo "$onto_name" > "$dotest/onto_name"
339 prev_head=`git-rev-parse HEAD^0`
340 echo "$prev_head" > "$dotest/prev_head"
342 msgnum=0
343 for cmt in `git-rev-list --reverse --no-merges "$upstream"..ORIG_HEAD`
345 msgnum=$(($msgnum + 1))
346 echo "$cmt" > "$dotest/cmt.$msgnum"
347 done
349 echo 1 >"$dotest/msgnum"
350 echo $msgnum >"$dotest/end"
352 end=$msgnum
353 msgnum=1
355 while test "$msgnum" -le "$end"
357 call_merge "$msgnum"
358 continue_merge
359 done
361 finish_rb_merge