6 git-rev-parse - Pick out and massage parameters
12 'git rev-parse' [ --option ] <args>...
17 Many Git porcelainish commands take mixture of flags
18 (i.e. parameters that begin with a dash '-') and parameters
19 meant for the underlying 'git rev-list' command they use internally
20 and flags and parameters for the other commands they use
21 downstream of 'git rev-list'. This command is used to
22 distinguish between them.
28 Use 'git rev-parse' in option parsing mode (see PARSEOPT section below).
31 Only meaningful in `--parseopt` mode. Tells the option parser to echo
32 out the first `--` met instead of skipping it.
34 --stop-at-non-option::
35 Only meaningful in `--parseopt` mode. Lets the option parser stop at
36 the first non-option argument. This can be used to parse sub-commands
37 that take options themselves.
40 Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE
41 section below). In contrast to the `--sq` option below, this
42 mode does only quoting. Nothing else is done to command input.
45 Do not output flags and parameters not meant for
46 'git rev-list' command.
49 Do not output flags and parameters meant for
50 'git rev-list' command.
53 Do not output non-flag parameters.
56 Do not output flag parameters.
59 If there is no parameter given by the user, use `<arg>`
63 Behave as if 'git rev-parse' was invoked from the `<arg>`
64 subdirectory of the working tree. Any relative filenames are
65 resolved as if they are prefixed by `<arg>` and will be printed
68 This can be used to convert arguments to a command run in a subdirectory
69 so that they can still be used after moving to the top-level of the
70 repository. For example:
73 prefix=$(git rev-parse --show-prefix)
74 cd "$(git rev-parse --show-toplevel)"
75 eval "set -- $(git rev-parse --sq --prefix "$prefix" "$@")"
79 Verify that exactly one parameter is provided, and that it
80 can be turned into a raw 20-byte SHA-1 that can be used to
81 access the object database. If so, emit it to the standard
82 output; otherwise, error out.
84 If you want to make sure that the output actually names an object in
85 your object database and/or can be used as a specific type of object
86 you require, you can add "^{type}" peeling operator to the parameter.
87 For example, `git rev-parse "$VAR^{commit}"` will make sure `$VAR`
88 names an existing object that is a commit-ish (i.e. a commit, or an
89 annotated tag that points at a commit). To make sure that `$VAR`
90 names an existing object of any type, `git rev-parse "$VAR^{object}"`
95 Only meaningful in `--verify` mode. Do not output an error
96 message if the first argument is not a valid object name;
97 instead exit with non-zero status silently.
100 Usually the output is made one line per flag and
101 parameter. This option makes output a single line,
102 properly quoted for consumption by shell. Useful when
103 you expect your parameter to contain whitespaces and
104 newlines (e.g. when using pickaxe `-S` with
105 'git diff-{asterisk}'). In contrast to the `--sq-quote` option,
106 the command input is still interpreted as usual.
109 When showing object names, prefix them with '{caret}' and
110 strip '{caret}' prefix from the object names that already have
114 Usually the object names are output in SHA-1 form (with
115 possible '{caret}' prefix); this option makes them output in a
116 form as close to the original input as possible.
118 --symbolic-full-name::
119 This is similar to \--symbolic, but it omits input that
120 are not refs (i.e. branch or tag names; or more
121 explicitly disambiguating "heads/master" form, when you
122 want to name the "master" branch when there is an
123 unfortunately named tag "master"), and show them as full
124 refnames (e.g. "refs/heads/master").
126 --abbrev-ref[=(strict|loose)]::
127 A non-ambiguous short name of the objects name.
128 The option core.warnAmbiguousRefs is used to select the strict
131 --disambiguate=<prefix>::
132 Show every object whose name begins with the given prefix.
133 The <prefix> must be at least 4 hexadecimal digits long to
134 avoid listing each and every object in the repository by
138 Show all refs found in `refs/`.
140 --branches[=pattern]::
142 --remotes[=pattern]::
143 Show all branches, tags, or remote-tracking branches,
144 respectively (i.e., refs found in `refs/heads`,
145 `refs/tags`, or `refs/remotes`, respectively).
147 If a `pattern` is given, only refs matching the given shell glob are
148 shown. If the pattern does not contain a globbing character (`?`,
149 `*`, or `[`), it is turned into a prefix match by appending `/*`.
152 Show all refs matching the shell glob pattern `pattern`. If
153 the pattern does not start with `refs/`, this is automatically
154 prepended. If the pattern does not contain a globbing
155 character (`?`, `*`, or `[`), it is turned into a prefix
156 match by appending `/*`.
158 --exclude=<glob-pattern>::
159 Do not include refs matching '<glob-pattern>' that the next `--all`,
160 `--branches`, `--tags`, `--remotes`, or `--glob` would otherwise
161 consider. Repetitions of this option accumulate exclusion patterns
162 up to the next `--all`, `--branches`, `--tags`, `--remotes`, or
163 `--glob` option (other options or arguments do not clear
164 accumlated patterns).
166 The patterns given should not begin with `refs/heads`, `refs/tags`, or
167 `refs/remotes` when applied to `--branches`, `--tags`, or `--remotes`,
168 respectively, and they must begin with `refs/` when applied to `--glob`
169 or `--all`. If a trailing '/{asterisk}' is intended, it must be given
173 Show the absolute path of the top-level directory.
176 When the command is invoked from a subdirectory, show the
177 path of the current directory relative to the top-level
181 When the command is invoked from a subdirectory, show the
182 path of the top-level directory relative to the current
183 directory (typically a sequence of "../", or an empty string).
186 Show `$GIT_DIR` if defined. Otherwise show the path to
187 the .git directory. The path shown, when relative, is
188 relative to the current working directory.
190 If `$GIT_DIR` is not defined and the current directory
191 is not detected to lie in a Git repository or work tree
192 print a message to stderr and exit with nonzero status.
194 --is-inside-git-dir::
195 When the current working directory is below the repository
196 directory print "true", otherwise "false".
198 --is-inside-work-tree::
199 When the current working directory is inside the work tree of the
200 repository print "true", otherwise "false".
202 --is-bare-repository::
203 When the repository is bare print "true", otherwise "false".
206 List the GIT_* environment variables that are local to the
207 repository (e.g. GIT_DIR or GIT_WORK_TREE, but not GIT_EDITOR).
208 Only the names of the variables are listed, not their value,
209 even if they are set.
213 Instead of outputting the full SHA-1 values of object names try to
214 abbreviate them to a shorter unique name. When no length is specified
215 7 is used. The minimum length is 4.
219 Parse the date string, and output the corresponding
220 --max-age= parameter for 'git rev-list'.
223 --before=datestring::
224 Parse the date string, and output the corresponding
225 --min-age= parameter for 'git rev-list'.
228 Flags and parameters to be parsed.
230 --resolve-git-dir <path>::
231 Check if <path> is a valid repository or a gitfile that
232 points at a valid repository, and print the location of the
233 repository. If <path> is a gitfile then the resolved path
234 to the real repository is printed.
237 include::revisions.txt[]
242 In `--parseopt` mode, 'git rev-parse' helps massaging options to bring to shell
243 scripts the same facilities C builtins have. It works as an option normalizer
244 (e.g. splits single switches aggregate values), a bit like `getopt(1)` does.
246 It takes on the standard input the specification of the options to parse and
247 understand, and echoes on the standard output a string suitable for `sh(1)` `eval`
248 to replace the arguments with normalized ones. In case of error, it outputs
249 usage on the standard error stream, and exits with code 129.
251 Note: Make sure you quote the result when passing it to `eval`. See
252 below for an example.
257 'git rev-parse --parseopt' input format is fully text based. It has two parts,
258 separated by a line that contains only `--`. The lines before the separator
259 (should be more than one) are used for the usage.
260 The lines after the separator describe the options.
262 Each line of options has this format:
265 <opt_spec><flags>* SP+ help LF
269 its format is the short option character, then the long option name
270 separated by a comma. Both parts are not required, though at least one
271 is necessary. `h,help`, `dry-run` and `f` are all three correct
275 `<flags>` are of `*`, `=`, `?` or `!`.
276 * Use `=` if the option takes an argument.
278 * Use `?` to mean that the option is optional (though its use is discouraged).
280 * Use `*` to mean that this option should not be listed in the usage
281 generated for the `-h` argument. It's shown for `--help-all` as
282 documented in linkgit:gitcli[7].
284 * Use `!` to not make the corresponding negated long option available.
286 The remainder of the line, after stripping the spaces, is used
287 as the help associated to the option.
289 Blank lines are ignored, and lines that don't match this specification are used
290 as option group headers (start the line with a space to create such
298 some-command [options] <args>...
300 some-command does foo and bar!
304 foo some nifty option --foo
305 bar= some cool option --bar with an argument
307 An option group Header
308 C? option C with an optional argument"
310 eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)"
316 In `--sq-quote` mode, 'git rev-parse' echoes on the standard output a
317 single line suitable for `sh(1)` `eval`. This line is made by
318 normalizing the arguments following `--sq-quote`. Nothing other than
319 quoting the arguments is done.
321 If you want command input to still be interpreted as usual by
322 'git rev-parse' before the output is shell quoted, see the `--sq`
329 $ cat >your-git-script.sh <<\EOF
331 args=$(git rev-parse --sq-quote "$@") # quote user-supplied arguments
332 command="git frotz -n24 $args" # and use it inside a handcrafted
337 $ sh your-git-script.sh "a b'c"
343 * Print the object name of the current commit:
346 $ git rev-parse --verify HEAD
349 * Print the commit object name from the revision in the $REV shell variable:
352 $ git rev-parse --verify $REV^{commit}
355 This will error out if $REV is empty or not a valid revision.
360 $ git rev-parse --default master --verify $REV
363 but if $REV is empty, the commit object name from master will be printed.
367 Part of the linkgit:git[1] suite