ci(linux-asan-ubsan): let's save some time
[git.git] / pkt-line.h
blob954eec87197d3e0c50812879d47e0afbb008baa3
1 #ifndef PKTLINE_H
2 #define PKTLINE_H
4 #include "strbuf.h"
5 #include "sideband.h"
7 /*
8 * Write a packetized stream, where each line is preceded by
9 * its length (including the header) as a 4-byte hex number.
10 * A length of 'zero' means end of stream (and a length of 1-3
11 * would be an error).
13 * This is all pretty stupid, but we use this packetized line
14 * format to make a streaming format possible without ever
15 * over-running the read buffers. That way we'll never read
16 * into what might be the pack data (which should go to another
17 * process entirely).
19 * The writing side could use stdio, but since the reading
20 * side can't, we stay with pure read/write interfaces.
22 void packet_flush(int fd);
23 void packet_delim(int fd);
24 void packet_response_end(int fd);
25 void packet_write_fmt(int fd, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
26 void packet_buf_flush(struct strbuf *buf);
27 void packet_buf_delim(struct strbuf *buf);
28 void set_packet_header(char *buf, int size);
29 void packet_write(int fd_out, const char *buf, size_t size);
30 void packet_buf_write(struct strbuf *buf, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
31 int packet_flush_gently(int fd);
32 int packet_write_fmt_gently(int fd, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
33 int write_packetized_from_fd_no_flush(int fd_in, int fd_out);
34 int write_packetized_from_buf_no_flush_count(const char *src_in, size_t len,
35 int fd_out, int *packet_counter);
36 static inline int write_packetized_from_buf_no_flush(const char *src_in,
37 size_t len, int fd_out)
39 return write_packetized_from_buf_no_flush_count(src_in, len, fd_out, NULL);
43 * Stdio versions of packet_write functions. When mixing these with fd
44 * based functions, take care to call fflush(3) before doing fd writes or
45 * closing the fd.
47 void packet_fwrite(FILE *f, const char *buf, size_t size);
48 void packet_fwrite_fmt(FILE *f, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
50 /* packet_fflush writes a flush packet and flushes the stdio buffer of f */
51 void packet_fflush(FILE *f);
54 * Read a packetized line into the buffer, which must be at least size bytes
55 * long. The return value specifies the number of bytes read into the buffer.
57 * If options does not contain PACKET_READ_GENTLE_ON_EOF, we will die under any
58 * of the following conditions:
60 * 1. Read error from descriptor.
62 * 2. Protocol error from the remote (e.g., bogus length characters).
64 * 3. Receiving a packet larger than "size" bytes.
66 * 4. Truncated output from the remote (e.g., we expected a packet but got
67 * EOF, or we got a partial packet followed by EOF).
69 * If options does contain PACKET_READ_GENTLE_ON_EOF, we will not die on
70 * condition 4 (truncated input), but instead return -1. However, we will still
71 * die for the other 3 conditions.
73 * If options contains PACKET_READ_CHOMP_NEWLINE, a trailing newline (if
74 * present) is removed from the buffer before returning.
76 * If options contains PACKET_READ_DIE_ON_ERR_PACKET, it dies when it sees an
77 * ERR packet.
79 * If options contains PACKET_READ_GENTLE_ON_READ_ERROR, we will not die
80 * on read errors, but instead return -1. However, we may still die on an
81 * ERR packet (if requested).
83 #define PACKET_READ_GENTLE_ON_EOF (1u<<0)
84 #define PACKET_READ_CHOMP_NEWLINE (1u<<1)
85 #define PACKET_READ_DIE_ON_ERR_PACKET (1u<<2)
86 #define PACKET_READ_GENTLE_ON_READ_ERROR (1u<<3)
87 #define PACKET_READ_REDACT_URI_PATH (1u<<4)
88 int packet_read(int fd, char *buffer, unsigned size, int options);
91 * Convert a four hex digit packet line length header into its numeric
92 * representation.
94 * If lenbuf_hex contains non-hex characters, return -1. Otherwise, return the
95 * numeric value of the length header.
97 int packet_length(const char lenbuf_hex[4], size_t size);
100 * Read a packetized line into a buffer like the 'packet_read()' function but
101 * returns an 'enum packet_read_status' which indicates the status of the read.
102 * The number of bytes read will be assigned to *pktlen if the status of the
103 * read was 'PACKET_READ_NORMAL'.
105 * If src_buffer and *src_buffer are not NULL, it should point to a buffer
106 * containing the packet data to parse, of at least *src_len bytes. After the
107 * function returns, src_buf will be incremented and src_len decremented by the
108 * number of bytes consumed.
110 * If src_buffer (or *src_buffer) is NULL, then data is read from the
111 * descriptor "fd".
113 enum packet_read_status {
114 PACKET_READ_EOF,
115 PACKET_READ_NORMAL,
116 PACKET_READ_FLUSH,
117 PACKET_READ_DELIM,
118 PACKET_READ_RESPONSE_END,
120 enum packet_read_status packet_read_with_status(int fd, char **src_buffer,
121 size_t *src_len, char *buffer,
122 unsigned size, int *pktlen,
123 int options);
126 * Convenience wrapper for packet_read that is not gentle, and sets the
127 * CHOMP_NEWLINE option. The return value is NULL for a flush packet,
128 * and otherwise points to a static buffer (that may be overwritten by
129 * subsequent calls). If the size parameter is not NULL, the length of the
130 * packet is written to it.
132 char *packet_read_line(int fd, int *size);
135 * Convenience wrapper for packet_read that sets the PACKET_READ_GENTLE_ON_EOF
136 * and CHOMP_NEWLINE options. The return value specifies the number of bytes
137 * read into the buffer or -1 on truncated input. If the *dst_line parameter
138 * is not NULL it will return NULL for a flush packet or when the number of
139 * bytes copied is zero and otherwise points to a static buffer (that may be
140 * overwritten by subsequent calls). If the size parameter is not NULL, the
141 * length of the packet is written to it.
143 int packet_read_line_gently(int fd, int *size, char **dst_line);
146 * Reads a stream of variable sized packets until a flush packet is detected.
148 ssize_t read_packetized_to_strbuf(int fd_in, struct strbuf *sb_out, int options);
151 * Receive multiplexed output stream over git native protocol.
152 * in_stream is the input stream from the remote, which carries data
153 * in pkt_line format with band designator. Demultiplex it into out
154 * and err and return error appropriately. Band #1 carries the
155 * primary payload. Things coming over band #2 is not necessarily
156 * error; they are usually informative message on the standard error
157 * stream, aka "verbose"). A message over band #3 is a signal that
158 * the remote died unexpectedly. A flush() concludes the stream.
160 * Returns SIDEBAND_FLUSH upon a normal conclusion, and SIDEBAND_PROTOCOL_ERROR
161 * or SIDEBAND_REMOTE_ERROR if an error occurred.
163 int recv_sideband(const char *me, int in_stream, int out);
165 struct packet_reader {
166 /* source file descriptor */
167 int fd;
169 /* source buffer and its size */
170 char *src_buffer;
171 size_t src_len;
173 /* buffer that pkt-lines are read into and its size */
174 char *buffer;
175 unsigned buffer_size;
177 /* options to be used during reads */
178 int options;
180 /* status of the last read */
181 enum packet_read_status status;
183 /* length of data read during the last read */
184 int pktlen;
186 /* the last line read */
187 const char *line;
189 /* indicates if a line has been peeked */
190 int line_peeked;
192 unsigned use_sideband : 1;
193 const char *me;
195 /* hash algorithm in use */
196 const struct git_hash_algo *hash_algo;
200 * Initialize a 'struct packet_reader' object which is an
201 * abstraction around the 'packet_read_with_status()' function.
203 void packet_reader_init(struct packet_reader *reader, int fd,
204 char *src_buffer, size_t src_len,
205 int options);
208 * Perform a packet read and return the status of the read.
209 * The values of 'pktlen' and 'line' are updated based on the status of the
210 * read as follows:
212 * PACKET_READ_ERROR: 'pktlen' is set to '-1' and 'line' is set to NULL
213 * PACKET_READ_NORMAL: 'pktlen' is set to the number of bytes read
214 * 'line' is set to point at the read line
215 * PACKET_READ_FLUSH: 'pktlen' is set to '0' and 'line' is set to NULL
217 enum packet_read_status packet_reader_read(struct packet_reader *reader);
220 * Peek the next packet line without consuming it and return the status.
221 * The next call to 'packet_reader_read()' will perform a read of the same line
222 * that was peeked, consuming the line.
224 * Peeking multiple times without calling 'packet_reader_read()' will return
225 * the same result.
227 enum packet_read_status packet_reader_peek(struct packet_reader *reader);
229 #define DEFAULT_PACKET_MAX 1000
230 #define LARGE_PACKET_MAX 65520
231 #define LARGE_PACKET_DATA_MAX (LARGE_PACKET_MAX - 4)
232 extern char packet_buffer[LARGE_PACKET_MAX];
234 struct packet_writer {
235 int dest_fd;
236 unsigned use_sideband : 1;
239 void packet_writer_init(struct packet_writer *writer, int dest_fd);
241 /* These functions die upon failure. */
242 __attribute__((format (printf, 2, 3)))
243 void packet_writer_write(struct packet_writer *writer, const char *fmt, ...);
244 __attribute__((format (printf, 2, 3)))
245 void packet_writer_error(struct packet_writer *writer, const char *fmt, ...);
246 void packet_writer_delim(struct packet_writer *writer);
247 void packet_writer_flush(struct packet_writer *writer);
249 void packet_trace_identity(const char *prog);
251 #endif