t/test-lib.sh

   1 # Test framework for git.  See t/README for usage.
   2 #
   3 # Copyright (c) 2005 Junio C Hamano
   4 #
   5 # This program is free software: you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation, either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program.  If not, see http://www.gnu.org/licenses/ .
  17
  18 # Test the binaries we have just built.  The tests are kept in
  19 # t/ subdirectory and are run in 'trash directory' subdirectory.
  20 if test -z "$TEST_DIRECTORY"
  21 then
  22         # We allow tests to override this, in case they want to run tests
  23         # outside of t/, e.g. for running tests on the test library
  24         # itself.
  25         TEST_DIRECTORY=$(pwd)
  26 else
  27         # ensure that TEST_DIRECTORY is an absolute path so that it
  28         # is valid even if the current working directory is changed
  29         TEST_DIRECTORY=$(cd "$TEST_DIRECTORY" && pwd) || exit 1
  30 fi
  31 if test -z "$TEST_OUTPUT_DIRECTORY"
  32 then
  33         # Similarly, override this to store the test-results subdir
  34         # elsewhere
  35         TEST_OUTPUT_DIRECTORY=$TEST_DIRECTORY
  36 fi
  37 GIT_BUILD_DIR="$TEST_DIRECTORY"/..
  38
  39 # If we were built with ASAN, it may complain about leaks
  40 # of program-lifetime variables. Disable it by default to lower
  41 # the noise level. This needs to happen at the start of the script,
  42 # before we even do our "did we build git yet" check (since we don't
  43 # want that one to complain to stderr).
  44 : ${ASAN_OPTIONS=detect_leaks=0:abort_on_error=1}
  45 export ASAN_OPTIONS
  46
  47 # If LSAN is in effect we _do_ want leak checking, but we still
  48 # want to abort so that we notice the problems.
  49 : ${LSAN_OPTIONS=abort_on_error=1}
  50 export LSAN_OPTIONS
  51
  52 ################################################################
  53 # It appears that people try to run tests without building...
  54 "$GIT_BUILD_DIR/git" >/dev/null
  55 if test $? != 1
  56 then
  57         echo >&2 'error: you do not seem to have built git yet.'
  58         exit 1
  59 fi
  60
  61 . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS
  62 export PERL_PATH SHELL_PATH
  63
  64 # if --tee was passed, write the output not only to the terminal, but
  65 # additionally to the file test-results/$BASENAME.out, too.
  66 case "$GIT_TEST_TEE_STARTED, $* " in
  67 done,*)
  68         # do not redirect again
  69         ;;
  70 *' --tee '*|*' --va'*|*' --verbose-log '*)
  71         mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results"
  72         BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)"
  73
  74         # Make this filename available to the sub-process in case it is using
  75         # --verbose-log.
  76         GIT_TEST_TEE_OUTPUT_FILE=$BASE.out
  77         export GIT_TEST_TEE_OUTPUT_FILE
  78
  79         # Truncate before calling "tee -a" to get rid of the results
  80         # from any previous runs.
  81         >"$GIT_TEST_TEE_OUTPUT_FILE"
  82
  83         (GIT_TEST_TEE_STARTED=done ${TEST_SHELL_PATH} "$0" "$@" 2>&1;
  84          echo $? >"$BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE"
  85         test "$(cat "$BASE.exit")" = 0
  86         exit
  87         ;;
  88 esac
  89
  90 # For repeatability, reset the environment to known value.
  91 # TERM is sanitized below, after saving color control sequences.
  92 LANG=C
  93 LC_ALL=C
  94 PAGER=cat
  95 TZ=UTC
  96 export LANG LC_ALL PAGER TZ
  97 EDITOR=:
  98 # A call to "unset" with no arguments causes at least Solaris 10
  99 # /usr/xpg4/bin/sh and /bin/ksh to bail out.  So keep the unsets
 100 # deriving from the command substitution clustered with the other
 101 # ones.
 102 unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e '
 103         my @env = keys %ENV;
 104         my $ok = join("|", qw(
 105                 TRACE
 106                 DEBUG
 107                 TEST
 108                 .*_TEST
 109                 PROVE
 110                 VALGRIND
 111                 UNZIP
 112                 PERF_
 113                 CURL_VERBOSE
 114                 TRACE_CURL
 115         ));
 116         my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env);
 117         print join("\n", @vars);
 118 ')
 119 unset XDG_CACHE_HOME
 120 unset XDG_CONFIG_HOME
 121 unset GITPERLLIB
 122 GIT_AUTHOR_EMAIL=author@example.com
 123 GIT_AUTHOR_NAME='A U Thor'
 124 GIT_COMMITTER_EMAIL=committer@example.com
 125 GIT_COMMITTER_NAME='C O Mitter'
 126 GIT_MERGE_VERBOSITY=5
 127 GIT_MERGE_AUTOEDIT=no
 128 export GIT_MERGE_VERBOSITY GIT_MERGE_AUTOEDIT
 129 export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME
 130 export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME
 131 export EDITOR
 132
 133 # Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output
 134 GIT_TRACE_BARE=1
 135 export GIT_TRACE_BARE
 136
 137 if test -n "${TEST_GIT_INDEX_VERSION:+isset}"
 138 then
 139         GIT_INDEX_VERSION="$TEST_GIT_INDEX_VERSION"
 140         export GIT_INDEX_VERSION
 141 fi
 142
 143 # Add libc MALLOC and MALLOC_PERTURB test
 144 # only if we are not executing the test with valgrind
 145 if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null ||
 146    test -n "$TEST_NO_MALLOC_CHECK"
 147 then
 148         setup_malloc_check () {
 149                 : nothing
 150         }
 151         teardown_malloc_check () {
 152                 : nothing
 153         }
 154 else
 155         setup_malloc_check () {
 156                 MALLOC_CHECK_=3 MALLOC_PERTURB_=165
 157                 export MALLOC_CHECK_ MALLOC_PERTURB_
 158         }
 159         teardown_malloc_check () {
 160                 unset MALLOC_CHECK_ MALLOC_PERTURB_
 161         }
 162 fi
 163
 164 # Protect ourselves from common misconfiguration to export
 165 # CDPATH into the environment
 166 unset CDPATH
 167
 168 unset GREP_OPTIONS
 169 unset UNZIP
 170
 171 case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in
 172 1|2|true)
 173         GIT_TRACE=4
 174         ;;
 175 esac
 176
 177 # Convenience
 178 #
 179 # A regexp to match 5, 35 and 40 hexdigits
 180 _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
 181 _x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05"
 182 _x40="$_x35$_x05"
 183
 184 # Zero SHA-1
 185 _z40=0000000000000000000000000000000000000000
 186
 187 OID_REGEX="$_x40"
 188 ZERO_OID=$_z40
 189 EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904
 190 EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391
 191
 192 # Line feed
 193 LF='
 194 '
 195
 196 # UTF-8 ZERO WIDTH NON-JOINER, which HFS+ ignores
 197 # when case-folding filenames
 198 u200c=$(printf '\342\200\214')
 199
 200 export _x05 _x35 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB ZERO_OID OID_REGEX
 201
 202 # Each test should start with something like this, after copyright notices:
 203 #
 204 # test_description='Description of this test...
 205 # This test checks if command xyzzy does the right thing...
 206 # '
 207 # . ./test-lib.sh
 208 test "x$TERM" != "xdumb" && (
 209                 test -t 1 &&
 210                 tput bold >/dev/null 2>&1 &&
 211                 tput setaf 1 >/dev/null 2>&1 &&
 212                 tput sgr0 >/dev/null 2>&1
 213         ) &&
 214         color=t
 215
 216 while test "$#" -ne 0
 217 do
 218         case "$1" in
 219         -d|--d|--de|--deb|--debu|--debug)
 220                 debug=t; shift ;;
 221         -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
 222                 immediate=t; shift ;;
 223         -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
 224                 GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;;
 225         -r)
 226                 shift; test "$#" -ne 0 || {
 227                         echo 'error: -r requires an argument' >&2;
 228                         exit 1;
 229                 }
 230                 run_list=$1; shift ;;
 231         --run=*)
 232                 run_list=${1#--*=}; shift ;;
 233         -h|--h|--he|--hel|--help)
 234                 help=t; shift ;;
 235         -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
 236                 verbose=t; shift ;;
 237         --verbose-only=*)
 238                 verbose_only=${1#--*=}
 239                 shift ;;
 240         -q|--q|--qu|--qui|--quie|--quiet)
 241                 # Ignore --quiet under a TAP::Harness. Saying how many tests
 242                 # passed without the ok/not ok details is always an error.
 243                 test -z "$HARNESS_ACTIVE" && quiet=t; shift ;;
 244         --with-dashes)
 245                 with_dashes=t; shift ;;
 246         --no-color)
 247                 color=; shift ;;
 248         --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
 249                 valgrind=memcheck
 250                 shift ;;
 251         --valgrind=*)
 252                 valgrind=${1#--*=}
 253                 shift ;;
 254         --valgrind-only=*)
 255                 valgrind_only=${1#--*=}
 256                 shift ;;
 257         --tee)
 258                 shift ;; # was handled already
 259         --root=*)
 260                 root=${1#--*=}
 261                 shift ;;
 262         --chain-lint)
 263                 GIT_TEST_CHAIN_LINT=1
 264                 shift ;;
 265         --no-chain-lint)
 266                 GIT_TEST_CHAIN_LINT=0
 267                 shift ;;
 268         -x)
 269                 # Some test scripts can't be reliably traced  with '-x',
 270                 # unless the test is run with a Bash version supporting
 271                 # BASH_XTRACEFD (introduced in Bash v4.1).  Check whether
 272                 # this test is marked as such, and ignore '-x' if it
 273                 # isn't executed with a suitable Bash version.
 274                 if test -z "$test_untraceable" || {
 275                      test -n "$BASH_VERSION" && {
 276                        test ${BASH_VERSINFO[0]} -gt 4 || {
 277                          test ${BASH_VERSINFO[0]} -eq 4 &&
 278                          test ${BASH_VERSINFO[1]} -ge 1
 279                        }
 280                      }
 281                    }
 282                 then
 283                         trace=t
 284                 else
 285                         echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD"
 286                 fi
 287                 shift ;;
 288         --verbose-log)
 289                 verbose_log=t
 290                 shift ;;
 291         *)
 292                 echo "error: unknown test option '$1'" >&2; exit 1 ;;
 293         esac
 294 done
 295
 296 if test -n "$valgrind_only"
 297 then
 298         test -z "$valgrind" && valgrind=memcheck
 299         test -z "$verbose" && verbose_only="$valgrind_only"
 300 elif test -n "$valgrind"
 301 then
 302         test -z "$verbose_log" && verbose=t
 303 fi
 304
 305 if test -n "$trace" && test -z "$verbose_log"
 306 then
 307         verbose=t
 308 fi
 309
 310 if test -n "$color"
 311 then
 312         # Save the color control sequences now rather than run tput
 313         # each time say_color() is called.  This is done for two
 314         # reasons:
 315         #   * TERM will be changed to dumb
 316         #   * HOME will be changed to a temporary directory and tput
 317         #     might need to read ~/.terminfo from the original HOME
 318         #     directory to get the control sequences
 319         # Note:  This approach assumes the control sequences don't end
 320         # in a newline for any terminal of interest (command
 321         # substitutions strip trailing newlines).  Given that most
 322         # (all?) terminals in common use are related to ECMA-48, this
 323         # shouldn't be a problem.
 324         say_color_error=$(tput bold; tput setaf 1) # bold red
 325         say_color_skip=$(tput setaf 4) # blue
 326         say_color_warn=$(tput setaf 3) # brown/yellow
 327         say_color_pass=$(tput setaf 2) # green
 328         say_color_info=$(tput setaf 6) # cyan
 329         say_color_reset=$(tput sgr0)
 330         say_color_="" # no formatting for normal text
 331         say_color () {
 332                 test -z "$1" && test -n "$quiet" && return
 333                 eval "say_color_color=\$say_color_$1"
 334                 shift
 335                 printf "%s\\n" "$say_color_color$*$say_color_reset"
 336         }
 337 else
 338         say_color() {
 339                 test -z "$1" && test -n "$quiet" && return
 340                 shift
 341                 printf "%s\n" "$*"
 342         }
 343 fi
 344
 345 TERM=dumb
 346 export TERM
 347
 348 error () {
 349         say_color error "error: $*"
 350         GIT_EXIT_OK=t
 351         exit 1
 352 }
 353
 354 say () {
 355         say_color info "$*"
 356 }
 357
 358 if test -n "$HARNESS_ACTIVE"
 359 then
 360         if test "$verbose" = t || test -n "$verbose_only"
 361         then
 362                 printf 'Bail out! %s\n' \
 363                  'verbose mode forbidden under TAP harness; try --verbose-log'
 364                 exit 1
 365         fi
 366 fi
 367
 368 test "${test_description}" != "" ||
 369 error "Test script did not set test_description."
 370
 371 if test "$help" = "t"
 372 then
 373         printf '%s\n' "$test_description"
 374         exit 0
 375 fi
 376
 377 exec 5>&1
 378 exec 6<&0
 379 exec 7>&2
 380 if test "$verbose_log" = "t"
 381 then
 382         exec 3>>"$GIT_TEST_TEE_OUTPUT_FILE" 4>&3
 383 elif test "$verbose" = "t"
 384 then
 385         exec 4>&2 3>&1
 386 else
 387         exec 4>/dev/null 3>/dev/null
 388 fi
 389
 390 # Send any "-x" output directly to stderr to avoid polluting tests
 391 # which capture stderr. We can do this unconditionally since it
 392 # has no effect if tracing isn't turned on.
 393 #
 394 # Note that this sets up the trace fd as soon as we assign the variable, so it
 395 # must come after the creation of descriptor 4 above. Likewise, we must never
 396 # unset this, as it has the side effect of closing descriptor 4, which we
 397 # use to show verbose tests to the user.
 398 #
 399 # Note also that we don't need or want to export it. The tracing is local to
 400 # this shell, and we would not want to influence any shells we exec.
 401 BASH_XTRACEFD=4
 402
 403 test_failure=0
 404 test_count=0
 405 test_fixed=0
 406 test_broken=0
 407 test_success=0
 408
 409 test_external_has_tap=0
 410
 411 die () {
 412         code=$?
 413         if test -n "$GIT_EXIT_OK"
 414         then
 415                 exit $code
 416         else
 417                 echo >&5 "FATAL: Unexpected exit with code $code"
 418                 exit 1
 419         fi
 420 }
 421
 422 GIT_EXIT_OK=
 423 trap 'die' EXIT
 424 trap 'exit $?' INT
 425
 426 # The user-facing functions are loaded from a separate file so that
 427 # test_perf subshells can have them too
 428 . "$TEST_DIRECTORY/test-lib-functions.sh"
 429
 430 # You are not expected to call test_ok_ and test_failure_ directly, use
 431 # the test_expect_* functions instead.
 432
 433 test_ok_ () {
 434         test_success=$(($test_success + 1))
 435         say_color "" "ok $test_count - $@"
 436 }
 437
 438 test_failure_ () {
 439         test_failure=$(($test_failure + 1))
 440         say_color error "not ok $test_count - $1"
 441         shift
 442         printf '%s\n' "$*" | sed -e 's/^/#      /'
 443         test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
 444 }
 445
 446 test_known_broken_ok_ () {
 447         test_fixed=$(($test_fixed+1))
 448         say_color error "ok $test_count - $@ # TODO known breakage vanished"
 449 }
 450
 451 test_known_broken_failure_ () {
 452         test_broken=$(($test_broken+1))
 453         say_color warn "not ok $test_count - $@ # TODO known breakage"
 454 }
 455
 456 test_debug () {
 457         test "$debug" = "" || eval "$1"
 458 }
 459
 460 match_pattern_list () {
 461         arg="$1"
 462         shift
 463         test -z "$*" && return 1
 464         for pattern_
 465         do
 466                 case "$arg" in
 467                 $pattern_)
 468                         return 0
 469                 esac
 470         done
 471         return 1
 472 }
 473
 474 match_test_selector_list () {
 475         title="$1"
 476         shift
 477         arg="$1"
 478         shift
 479         test -z "$1" && return 0
 480
 481         # Both commas and whitespace are accepted as separators.
 482         OLDIFS=$IFS
 483         IFS='   ,'
 484         set -- $1
 485         IFS=$OLDIFS
 486
 487         # If the first selector is negative we include by default.
 488         include=
 489         case "$1" in
 490                 !*) include=t ;;
 491         esac
 492
 493         for selector
 494         do
 495                 orig_selector=$selector
 496
 497                 positive=t
 498                 case "$selector" in
 499                         !*)
 500                                 positive=
 501                                 selector=${selector##?}
 502                                 ;;
 503                 esac
 504
 505                 test -z "$selector" && continue
 506
 507                 case "$selector" in
 508                         *-*)
 509                                 if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null
 510                                 then
 511                                         echo "error: $title: invalid non-numeric in range" \
 512                                                 "start: '$orig_selector'" >&2
 513                                         exit 1
 514                                 fi
 515                                 if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null
 516                                 then
 517                                         echo "error: $title: invalid non-numeric in range" \
 518                                                 "end: '$orig_selector'" >&2
 519                                         exit 1
 520                                 fi
 521                                 ;;
 522                         *)
 523                                 if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null
 524                                 then
 525                                         echo "error: $title: invalid non-numeric in test" \
 526                                                 "selector: '$orig_selector'" >&2
 527                                         exit 1
 528                                 fi
 529                 esac
 530
 531                 # Short cut for "obvious" cases
 532                 test -z "$include" && test -z "$positive" && continue
 533                 test -n "$include" && test -n "$positive" && continue
 534
 535                 case "$selector" in
 536                         -*)
 537                                 if test $arg -le ${selector#-}
 538                                 then
 539                                         include=$positive
 540                                 fi
 541                                 ;;
 542                         *-)
 543                                 if test $arg -ge ${selector%-}
 544                                 then
 545                                         include=$positive
 546                                 fi
 547                                 ;;
 548                         *-*)
 549                                 if test ${selector%%-*} -le $arg \
 550                                         && test $arg -le ${selector#*-}
 551                                 then
 552                                         include=$positive
 553                                 fi
 554                                 ;;
 555                         *)
 556                                 if test $arg -eq $selector
 557                                 then
 558                                         include=$positive
 559                                 fi
 560                                 ;;
 561                 esac
 562         done
 563
 564         test -n "$include"
 565 }
 566
 567 maybe_teardown_verbose () {
 568         test -z "$verbose_only" && return
 569         exec 4>/dev/null 3>/dev/null
 570         verbose=
 571 }
 572
 573 last_verbose=t
 574 maybe_setup_verbose () {
 575         test -z "$verbose_only" && return
 576         if match_pattern_list $test_count $verbose_only
 577         then
 578                 exec 4>&2 3>&1
 579                 # Emit a delimiting blank line when going from
 580                 # non-verbose to verbose.  Within verbose mode the
 581                 # delimiter is printed by test_expect_*.  The choice
 582                 # of the initial $last_verbose is such that before
 583                 # test 1, we do not print it.
 584                 test -z "$last_verbose" && echo >&3 ""
 585                 verbose=t
 586         else
 587                 exec 4>/dev/null 3>/dev/null
 588                 verbose=
 589         fi
 590         last_verbose=$verbose
 591 }
 592
 593 maybe_teardown_valgrind () {
 594         test -z "$GIT_VALGRIND" && return
 595         GIT_VALGRIND_ENABLED=
 596 }
 597
 598 maybe_setup_valgrind () {
 599         test -z "$GIT_VALGRIND" && return
 600         if test -z "$valgrind_only"
 601         then
 602                 GIT_VALGRIND_ENABLED=t
 603                 return
 604         fi
 605         GIT_VALGRIND_ENABLED=
 606         if match_pattern_list $test_count $valgrind_only
 607         then
 608                 GIT_VALGRIND_ENABLED=t
 609         fi
 610 }
 611
 612 want_trace () {
 613         test "$trace" = t && {
 614                 test "$verbose" = t || test "$verbose_log" = t
 615         }
 616 }
 617
 618 # This is a separate function because some tests use
 619 # "return" to end a test_expect_success block early
 620 # (and we want to make sure we run any cleanup like
 621 # "set +x").
 622 test_eval_inner_ () {
 623         # Do not add anything extra (including LF) after '$*'
 624         eval "
 625                 want_trace && set -x
 626                 $*"
 627 }
 628
 629 test_eval_ () {
 630         # If "-x" tracing is in effect, then we want to avoid polluting stderr
 631         # with non-test commands. But once in "set -x" mode, we cannot prevent
 632         # the shell from printing the "set +x" to turn it off (nor the saving
 633         # of $? before that). But we can make sure that the output goes to
 634         # /dev/null.
 635         #
 636         # There are a few subtleties here:
 637         #
 638         #   - we have to redirect descriptor 4 in addition to 2, to cover
 639         #     BASH_XTRACEFD
 640         #
 641         #   - the actual eval has to come before the redirection block (since
 642         #     it needs to see descriptor 4 to set up its stderr)
 643         #
 644         #   - likewise, any error message we print must be outside the block to
 645         #     access descriptor 4
 646         #
 647         #   - checking $? has to come immediately after the eval, but it must
 648         #     be _inside_ the block to avoid polluting the "set -x" output
 649         #
 650
 651         test_eval_inner_ "$@" </dev/null >&3 2>&4
 652         {
 653                 test_eval_ret_=$?
 654                 if want_trace
 655                 then
 656                         set +x
 657                 fi
 658         } 2>/dev/null 4>&2
 659
 660         if test "$test_eval_ret_" != 0 && want_trace
 661         then
 662                 say_color error >&4 "error: last command exited with \$?=$test_eval_ret_"
 663         fi
 664         return $test_eval_ret_
 665 }
 666
 667 test_run_ () {
 668         test_cleanup=:
 669         expecting_failure=$2
 670
 671         if test "${GIT_TEST_CHAIN_LINT:-1}" != 0; then
 672                 # turn off tracing for this test-eval, as it simply creates
 673                 # confusing noise in the "-x" output
 674                 trace_tmp=$trace
 675                 trace=
 676                 # 117 is magic because it is unlikely to match the exit
 677                 # code of other programs
 678                 if $(printf '%s\n' "$1" | sed -f "$GIT_BUILD_DIR/t/chainlint.sed" | grep -q '?![A-Z][A-Z]*?!') ||
 679                         test "OK-117" != "$(test_eval_ "(exit 117) && $1${LF}${LF}echo OK-\$?" 3>&1)"
 680                 then
 681                         error "bug in the test script: broken &&-chain or run-away HERE-DOC: $1"
 682                 fi
 683                 trace=$trace_tmp
 684         fi
 685
 686         setup_malloc_check
 687         test_eval_ "$1"
 688         eval_ret=$?
 689         teardown_malloc_check
 690
 691         if test -z "$immediate" || test $eval_ret = 0 ||
 692            test -n "$expecting_failure" && test "$test_cleanup" != ":"
 693         then
 694                 setup_malloc_check
 695                 test_eval_ "$test_cleanup"
 696                 teardown_malloc_check
 697         fi
 698         if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"
 699         then
 700                 echo ""
 701         fi
 702         return "$eval_ret"
 703 }
 704
 705 test_start_ () {
 706         test_count=$(($test_count+1))
 707         maybe_setup_verbose
 708         maybe_setup_valgrind
 709 }
 710
 711 test_finish_ () {
 712         echo >&3 ""
 713         maybe_teardown_valgrind
 714         maybe_teardown_verbose
 715 }
 716
 717 test_skip () {
 718         to_skip=
 719         skipped_reason=
 720         if match_pattern_list $this_test.$test_count $GIT_SKIP_TESTS
 721         then
 722                 to_skip=t
 723                 skipped_reason="GIT_SKIP_TESTS"
 724         fi
 725         if test -z "$to_skip" && test -n "$test_prereq" &&
 726            ! test_have_prereq "$test_prereq"
 727         then
 728                 to_skip=t
 729
 730                 of_prereq=
 731                 if test "$missing_prereq" != "$test_prereq"
 732                 then
 733                         of_prereq=" of $test_prereq"
 734                 fi
 735                 skipped_reason="missing $missing_prereq${of_prereq}"
 736         fi
 737         if test -z "$to_skip" && test -n "$run_list" &&
 738                 ! match_test_selector_list '--run' $test_count "$run_list"
 739         then
 740                 to_skip=t
 741                 skipped_reason="--run"
 742         fi
 743
 744         case "$to_skip" in
 745         t)
 746                 say_color skip >&3 "skipping test: $@"
 747                 say_color skip "ok $test_count # skip $1 ($skipped_reason)"
 748                 : true
 749                 ;;
 750         *)
 751                 false
 752                 ;;
 753         esac
 754 }
 755
 756 # stub; perf-lib overrides it
 757 test_at_end_hook_ () {
 758         :
 759 }
 760
 761 test_done () {
 762         GIT_EXIT_OK=t
 763
 764         if test -z "$HARNESS_ACTIVE"
 765         then
 766                 test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results"
 767                 mkdir -p "$test_results_dir"
 768                 base=${0##*/}
 769                 test_results_path="$test_results_dir/${base%.sh}.counts"
 770
 771                 cat >"$test_results_path" <<-EOF
 772                 total $test_count
 773                 success $test_success
 774                 fixed $test_fixed
 775                 broken $test_broken
 776                 failed $test_failure
 777
 778                 EOF
 779         fi
 780
 781         if test "$test_fixed" != 0
 782         then
 783                 say_color error "# $test_fixed known breakage(s) vanished; please update test(s)"
 784         fi
 785         if test "$test_broken" != 0
 786         then
 787                 say_color warn "# still have $test_broken known breakage(s)"
 788         fi
 789         if test "$test_broken" != 0 || test "$test_fixed" != 0
 790         then
 791                 test_remaining=$(( $test_count - $test_broken - $test_fixed ))
 792                 msg="remaining $test_remaining test(s)"
 793         else
 794                 test_remaining=$test_count
 795                 msg="$test_count test(s)"
 796         fi
 797         case "$test_failure" in
 798         0)
 799                 if test $test_external_has_tap -eq 0
 800                 then
 801                         if test $test_remaining -gt 0
 802                         then
 803                                 say_color pass "# passed all $msg"
 804                         fi
 805
 806                         # Maybe print SKIP message
 807                         test -z "$skip_all" || skip_all="# SKIP $skip_all"
 808                         case "$test_count" in
 809                         0)
 810                                 say "1..$test_count${skip_all:+ $skip_all}"
 811                                 ;;
 812                         *)
 813                                 test -z "$skip_all" ||
 814                                 say_color warn "$skip_all"
 815                                 say "1..$test_count"
 816                                 ;;
 817                         esac
 818                 fi
 819
 820                 if test -z "$debug"
 821                 then
 822                         test -d "$TRASH_DIRECTORY" ||
 823                         error "Tests passed but trash directory already removed before test cleanup; aborting"
 824
 825                         cd "$TRASH_DIRECTORY/.." &&
 826                         rm -fr "$TRASH_DIRECTORY" ||
 827                         error "Tests passed but test cleanup failed; aborting"
 828                 fi
 829                 test_at_end_hook_
 830
 831                 exit 0 ;;
 832
 833         *)
 834                 if test $test_external_has_tap -eq 0
 835                 then
 836                         say_color error "# failed $test_failure among $msg"
 837                         say "1..$test_count"
 838                 fi
 839
 840                 exit 1 ;;
 841
 842         esac
 843 }
 844
 845 if test -n "$valgrind"
 846 then
 847         make_symlink () {
 848                 test -h "$2" &&
 849                 test "$1" = "$(readlink "$2")" || {
 850                         # be super paranoid
 851                         if mkdir "$2".lock
 852                         then
 853                                 rm -f "$2" &&
 854                                 ln -s "$1" "$2" &&
 855                                 rm -r "$2".lock
 856                         else
 857                                 while test -d "$2".lock
 858                                 do
 859                                         say "Waiting for lock on $2."
 860                                         sleep 1
 861                                 done
 862                         fi
 863                 }
 864         }
 865
 866         make_valgrind_symlink () {
 867                 # handle only executables, unless they are shell libraries that
 868                 # need to be in the exec-path.
 869                 test -x "$1" ||
 870                 test "# " = "$(test_copy_bytes 2 <"$1")" ||
 871                 return;
 872
 873                 base=$(basename "$1")
 874                 case "$base" in
 875                 test-*)
 876                         symlink_target="$GIT_BUILD_DIR/t/helper/$base"
 877                         ;;
 878                 *)
 879                         symlink_target="$GIT_BUILD_DIR/$base"
 880                         ;;
 881                 esac
 882                 # do not override scripts
 883                 if test -x "$symlink_target" &&
 884                     test ! -d "$symlink_target" &&
 885                     test "#!" != "$(test_copy_bytes 2 <"$symlink_target")"
 886                 then
 887                         symlink_target=../valgrind.sh
 888                 fi
 889                 case "$base" in
 890                 *.sh|*.perl)
 891                         symlink_target=../unprocessed-script
 892                 esac
 893                 # create the link, or replace it if it is out of date
 894                 make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit
 895         }
 896
 897         # override all git executables in TEST_DIRECTORY/..
 898         GIT_VALGRIND=$TEST_DIRECTORY/valgrind
 899         mkdir -p "$GIT_VALGRIND"/bin
 900         for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/t/helper/test-*
 901         do
 902                 make_valgrind_symlink $file
 903         done
 904         # special-case the mergetools loadables
 905         make_symlink "$GIT_BUILD_DIR"/mergetools "$GIT_VALGRIND/bin/mergetools"
 906         OLDIFS=$IFS
 907         IFS=:
 908         for path in $PATH
 909         do
 910                 ls "$path"/git-* 2> /dev/null |
 911                 while read file
 912                 do
 913                         make_valgrind_symlink "$file"
 914                 done
 915         done
 916         IFS=$OLDIFS
 917         PATH=$GIT_VALGRIND/bin:$PATH
 918         GIT_EXEC_PATH=$GIT_VALGRIND/bin
 919         export GIT_VALGRIND
 920         GIT_VALGRIND_MODE="$valgrind"
 921         export GIT_VALGRIND_MODE
 922         GIT_VALGRIND_ENABLED=t
 923         test -n "$valgrind_only" && GIT_VALGRIND_ENABLED=
 924         export GIT_VALGRIND_ENABLED
 925 elif test -n "$GIT_TEST_INSTALLED"
 926 then
 927         GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path)  ||
 928         error "Cannot run git from $GIT_TEST_INSTALLED."
 929         PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR:$PATH
 930         GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH}
 931 else # normal case, use ../bin-wrappers only unless $with_dashes:
 932         git_bin_dir="$GIT_BUILD_DIR/bin-wrappers"
 933         if ! test -x "$git_bin_dir/git"
 934         then
 935                 if test -z "$with_dashes"
 936                 then
 937                         say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH"
 938                 fi
 939                 with_dashes=t
 940         fi
 941         PATH="$git_bin_dir:$PATH"
 942         GIT_EXEC_PATH=$GIT_BUILD_DIR
 943         if test -n "$with_dashes"
 944         then
 945                 PATH="$GIT_BUILD_DIR:$PATH"
 946         fi
 947 fi
 948 GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt
 949 GIT_CONFIG_NOSYSTEM=1
 950 GIT_ATTR_NOSYSTEM=1
 951 export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM
 952
 953 if test -z "$GIT_TEST_CMP"
 954 then
 955         if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT"
 956         then
 957                 GIT_TEST_CMP="$DIFF -c"
 958         else
 959                 GIT_TEST_CMP="$DIFF -u"
 960         fi
 961 fi
 962
 963 GITPERLLIB="$GIT_BUILD_DIR"/perl/build/lib
 964 export GITPERLLIB
 965 test -d "$GIT_BUILD_DIR"/templates/blt || {
 966         error "You haven't built things yet, have you?"
 967 }
 968
 969 if ! test -x "$GIT_BUILD_DIR"/t/helper/test-tool
 970 then
 971         echo >&2 'You need to build test-tool:'
 972         echo >&2 'Run "make t/helper/test-tool" in the source (toplevel) directory'
 973         exit 1
 974 fi
 975
 976 # Test repository
 977 TRASH_DIRECTORY="trash directory.$(basename "$0" .sh)"
 978 test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY"
 979 case "$TRASH_DIRECTORY" in
 980 /*) ;; # absolute path is good
 981  *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;;
 982 esac
 983 rm -fr "$TRASH_DIRECTORY" || {
 984         GIT_EXIT_OK=t
 985         echo >&5 "FATAL: Cannot prepare test area"
 986         exit 1
 987 }
 988
 989 HOME="$TRASH_DIRECTORY"
 990 GNUPGHOME="$HOME/gnupg-home-not-used"
 991 export HOME GNUPGHOME
 992
 993 if test -z "$TEST_NO_CREATE_REPO"
 994 then
 995         test_create_repo "$TRASH_DIRECTORY"
 996 else
 997         mkdir -p "$TRASH_DIRECTORY"
 998 fi
 999 # Use -P to resolve symlinks in our working directory so that the cwd
1000 # in subprocesses like git equals our $PWD (for pathname comparisons).
1001 cd -P "$TRASH_DIRECTORY" || exit 1
1002
1003 this_test=${0##*/}
1004 this_test=${this_test%%-*}
1005 if match_pattern_list "$this_test" $GIT_SKIP_TESTS
1006 then
1007         say_color info >&3 "skipping test $this_test altogether"
1008         skip_all="skip all tests in $this_test"
1009         test_done
1010 fi
1011
1012 # Provide an implementation of the 'yes' utility
1013 yes () {
1014         if test $# = 0
1015         then
1016                 y=y
1017         else
1018                 y="$*"
1019         fi
1020
1021         i=0
1022         while test $i -lt 99
1023         do
1024                 echo "$y"
1025                 i=$(($i+1))
1026         done
1027 }
1028
1029 # Fix some commands on Windows
1030 uname_s=$(uname -s)
1031 case $uname_s in
1032 *MINGW*)
1033         # Windows has its own (incompatible) sort and find
1034         sort () {
1035                 /usr/bin/sort "$@"
1036         }
1037         find () {
1038                 /usr/bin/find "$@"
1039         }
1040         # git sees Windows-style pwd
1041         pwd () {
1042                 builtin pwd -W
1043         }
1044         # no POSIX permissions
1045         # backslashes in pathspec are converted to '/'
1046         # exec does not inherit the PID
1047         test_set_prereq MINGW
1048         test_set_prereq NATIVE_CRLF
1049         test_set_prereq SED_STRIPS_CR
1050         test_set_prereq GREP_STRIPS_CR
1051         GIT_TEST_CMP=mingw_test_cmp
1052         ;;
1053 *CYGWIN*)
1054         test_set_prereq POSIXPERM
1055         test_set_prereq EXECKEEPSPID
1056         test_set_prereq CYGWIN
1057         test_set_prereq SED_STRIPS_CR
1058         test_set_prereq GREP_STRIPS_CR
1059         ;;
1060 *)
1061         test_set_prereq POSIXPERM
1062         test_set_prereq BSLASHPSPEC
1063         test_set_prereq EXECKEEPSPID
1064         ;;
1065 esac
1066
1067 ( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1
1068 test -z "$NO_PERL" && test_set_prereq PERL
1069 test -z "$NO_PTHREADS" && test_set_prereq PTHREADS
1070 test -z "$NO_PYTHON" && test_set_prereq PYTHON
1071 test -n "$USE_LIBPCRE1$USE_LIBPCRE2" && test_set_prereq PCRE
1072 test -n "$USE_LIBPCRE1" && test_set_prereq LIBPCRE1
1073 test -n "$USE_LIBPCRE2" && test_set_prereq LIBPCRE2
1074 test -z "$NO_GETTEXT" && test_set_prereq GETTEXT
1075
1076 # Can we rely on git's output in the C locale?
1077 if test -n "$GETTEXT_POISON"
1078 then
1079         GIT_GETTEXT_POISON=YesPlease
1080         export GIT_GETTEXT_POISON
1081         test_set_prereq GETTEXT_POISON
1082 else
1083         test_set_prereq C_LOCALE_OUTPUT
1084 fi
1085
1086 if test -z "$GIT_TEST_CHECK_CACHE_TREE"
1087 then
1088         GIT_TEST_CHECK_CACHE_TREE=true
1089         export GIT_TEST_CHECK_CACHE_TREE
1090 fi
1091
1092 test_lazy_prereq PIPE '
1093         # test whether the filesystem supports FIFOs
1094         test_have_prereq !MINGW,!CYGWIN &&
1095         rm -f testfifo && mkfifo testfifo
1096 '
1097
1098 test_lazy_prereq SYMLINKS '
1099         # test whether the filesystem supports symbolic links
1100         ln -s x y && test -h y
1101 '
1102
1103 test_lazy_prereq FILEMODE '
1104         test "$(git config --bool core.filemode)" = true
1105 '
1106
1107 test_lazy_prereq CASE_INSENSITIVE_FS '
1108         echo good >CamelCase &&
1109         echo bad >camelcase &&
1110         test "$(cat CamelCase)" != good
1111 '
1112
1113 test_lazy_prereq FUNNYNAMES '
1114         test_have_prereq !MINGW &&
1115         touch -- \
1116                 "FUNNYNAMES tab embedded" \
1117                 "FUNNYNAMES \"quote embedded\"" \
1118                 "FUNNYNAMES newline
1119 embedded" 2>/dev/null &&
1120         rm -- \
1121                 "FUNNYNAMES tab embedded" \
1122                 "FUNNYNAMES \"quote embedded\"" \
1123                 "FUNNYNAMES newline
1124 embedded" 2>/dev/null
1125 '
1126
1127 test_lazy_prereq UTF8_NFD_TO_NFC '
1128         # check whether FS converts nfd unicode to nfc
1129         auml=$(printf "\303\244")
1130         aumlcdiar=$(printf "\141\314\210")
1131         >"$auml" &&
1132         test -f "$aumlcdiar"
1133 '
1134
1135 test_lazy_prereq AUTOIDENT '
1136         sane_unset GIT_AUTHOR_NAME &&
1137         sane_unset GIT_AUTHOR_EMAIL &&
1138         git var GIT_AUTHOR_IDENT
1139 '
1140
1141 test_lazy_prereq EXPENSIVE '
1142         test -n "$GIT_TEST_LONG"
1143 '
1144
1145 test_lazy_prereq EXPENSIVE_ON_WINDOWS '
1146         test_have_prereq EXPENSIVE || test_have_prereq !MINGW,!CYGWIN
1147 '
1148
1149 test_lazy_prereq USR_BIN_TIME '
1150         test -x /usr/bin/time
1151 '
1152
1153 test_lazy_prereq NOT_ROOT '
1154         uid=$(id -u) &&
1155         test "$uid" != 0
1156 '
1157
1158 test_lazy_prereq JGIT '
1159         type jgit
1160 '
1161
1162 # SANITY is about "can you correctly predict what the filesystem would
1163 # do by only looking at the permission bits of the files and
1164 # directories?"  A typical example of !SANITY is running the test
1165 # suite as root, where a test may expect "chmod -r file && cat file"
1166 # to fail because file is supposed to be unreadable after a successful
1167 # chmod.  In an environment (i.e. combination of what filesystem is
1168 # being used and who is running the tests) that lacks SANITY, you may
1169 # be able to delete or create a file when the containing directory
1170 # doesn't have write permissions, or access a file even if the
1171 # containing directory doesn't have read or execute permissions.
1172
1173 test_lazy_prereq SANITY '
1174         mkdir SANETESTD.1 SANETESTD.2 &&
1175
1176         chmod +w SANETESTD.1 SANETESTD.2 &&
1177         >SANETESTD.1/x 2>SANETESTD.2/x &&
1178         chmod -w SANETESTD.1 &&
1179         chmod -r SANETESTD.1/x &&
1180         chmod -rx SANETESTD.2 ||
1181         error "bug in test sript: cannot prepare SANETESTD"
1182
1183         ! test -r SANETESTD.1/x &&
1184         ! rm SANETESTD.1/x && ! test -f SANETESTD.2/x
1185         status=$?
1186
1187         chmod +rwx SANETESTD.1 SANETESTD.2 &&
1188         rm -rf SANETESTD.1 SANETESTD.2 ||
1189         error "bug in test sript: cannot clean SANETESTD"
1190         return $status
1191 '
1192
1193 test FreeBSD != $uname_s || GIT_UNZIP=${GIT_UNZIP:-/usr/local/bin/unzip}
1194 GIT_UNZIP=${GIT_UNZIP:-unzip}
1195 test_lazy_prereq UNZIP '
1196         "$GIT_UNZIP" -v
1197         test $? -ne 127
1198 '
1199
1200 run_with_limited_cmdline () {
1201         (ulimit -s 128 && "$@")
1202 }
1203
1204 test_lazy_prereq CMDLINE_LIMIT '
1205         test_have_prereq !MINGW,!CYGWIN &&
1206         run_with_limited_cmdline true
1207 '
1208
1209 run_with_limited_stack () {
1210         (ulimit -s 128 && "$@")
1211 }
1212
1213 test_lazy_prereq ULIMIT_STACK_SIZE '
1214         test_have_prereq !MINGW,!CYGWIN &&
1215         run_with_limited_stack true
1216 '
1217
1218 build_option () {
1219         git version --build-options |
1220         sed -ne "s/^$1: //p"
1221 }
1222
1223 test_lazy_prereq LONG_IS_64BIT '
1224         test 8 -le "$(build_option sizeof-long)"
1225 '
1226
1227 test_lazy_prereq TIME_IS_64BIT 'test-tool date is64bit'
1228 test_lazy_prereq TIME_T_IS_64BIT 'test-tool date time_t-is64bit'
1229
1230 test_lazy_prereq CURL '
1231         curl --version
1232 '
1233
1234 # SHA1 is a test if the hash algorithm in use is SHA-1.  This is both for tests
1235 # which will not work with other hash algorithms and tests that work but don't
1236 # test anything meaningful (e.g. special values which cause short collisions).
1237 test_lazy_prereq SHA1 '
1238         test $(git hash-object /dev/null) = e69de29bb2d1d6434b8b29ae775ad8c2e48c5391
1239 '