4 The Git configuration file contains a number of variables that affect
5 the Git commands' behavior. The `.git/config` file in each repository
6 is used to store the configuration for that repository, and
7 `$HOME/.gitconfig` is used to store a per-user configuration as
8 fallback values for the `.git/config` file. The file `/etc/gitconfig`
9 can be used to store a system-wide default configuration.
11 The configuration variables are used by both the Git plumbing
12 and the porcelains. The variables are divided into sections, wherein
13 the fully qualified variable name of the variable itself is the last
14 dot-separated segment and the section name is everything before the last
15 dot. The variable names are case-insensitive, allow only alphanumeric
16 characters and `-`, and must start with an alphabetic character. Some
17 variables may appear multiple times.
22 The syntax is fairly flexible and permissive; whitespaces are mostly
23 ignored. The '#' and ';' characters begin comments to the end of line,
24 blank lines are ignored.
26 The file consists of sections and variables. A section begins with
27 the name of the section in square brackets and continues until the next
28 section begins. Section names are not case sensitive. Only alphanumeric
29 characters, `-` and `.` are allowed in section names. Each variable
30 must belong to some section, which means that there must be a section
31 header before the first setting of a variable.
33 Sections can be further divided into subsections. To begin a subsection
34 put its name in double quotes, separated by space from the section name,
35 in the section header, like in the example below:
38 [section "subsection"]
42 Subsection names are case sensitive and can contain any characters except
43 newline (doublequote `"` and backslash have to be escaped as `\"` and `\\`,
44 respectively). Section headers cannot span multiple
45 lines. Variables may belong directly to a section or to a given subsection.
46 You can have `[section]` if you have `[section "subsection"]`, but you
49 There is also a deprecated `[section.subsection]` syntax. With this
50 syntax, the subsection name is converted to lower-case and is also
51 compared case sensitively. These subsection names follow the same
52 restrictions as section names.
54 All the other lines (and the remainder of the line after the section
55 header) are recognized as setting variables, in the form
56 'name = value'. If there is no equal sign on the line, the entire line
57 is taken as 'name' and the variable is recognized as boolean "true".
58 The variable names are case-insensitive, allow only alphanumeric characters
59 and `-`, and must start with an alphabetic character. There can be more
60 than one value for a given variable; we say then that the variable is
63 Leading and trailing whitespace in a variable value is discarded.
64 Internal whitespace within a variable value is retained verbatim.
66 The values following the equals sign in variable assign are all either
67 a string, an integer, or a boolean. Boolean values may be given as yes/no,
68 1/0, true/false or on/off. Case is not significant in boolean values, when
69 converting value to the canonical form using '--bool' type specifier;
70 'git config' will ensure that the output is "true" or "false".
72 String values may be entirely or partially enclosed in double quotes.
73 You need to enclose variable values in double quotes if you want to
74 preserve leading or trailing whitespace, or if the variable value contains
75 comment characters (i.e. it contains '#' or ';').
76 Double quote `"` and backslash `\` characters in variable values must
77 be escaped: use `\"` for `"` and `\\` for `\`.
79 The following escape sequences (beside `\"` and `\\`) are recognized:
80 `\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
81 and `\b` for backspace (BS). No other char escape sequence, nor octal
82 char sequences are valid.
84 Variable values ending in a `\` are continued on the next line in the
85 customary UNIX fashion.
87 Some variables may require a special value format.
92 You can include one config file from another by setting the special
93 `include.path` variable to the name of the file to be included. The
94 included file is expanded immediately, as if its contents had been
95 found at the location of the include directive. If the value of the
96 `include.path` variable is a relative path, the path is considered to be
97 relative to the configuration file in which the include directive was
98 found. The value of `include.path` is subject to tilde expansion: `~/`
99 is expanded to the value of `$HOME`, and `~user/` to the specified
100 user's home directory. See below for examples.
107 ; Don't trust file modes
112 external = /usr/local/bin/diff-wrapper
117 merge = refs/heads/devel
121 gitProxy="ssh" for "kernel.org"
122 gitProxy=default-proxy ; for the rest
125 path = /path/to/foo.inc ; include by absolute path
126 path = foo ; expand "foo" relative to the current file
127 path = ~/foo ; expand "foo" in your $HOME directory
132 Note that this list is non-comprehensive and not necessarily complete.
133 For command-specific variables, you will find a more detailed description
134 in the appropriate manual page. You will find a description of non-core
135 porcelain configuration variables in the respective porcelain documentation.
138 These variables control various optional help messages designed to
139 aid new users. All 'advice.*' variables default to 'true', and you
140 can tell Git that you do not need help by setting these to 'false':
144 Set this variable to 'false' if you want to disable
145 'pushNonFFCurrent', 'pushNonFFDefault',
146 'pushNonFFMatching', 'pushAlreadyExists',
147 'pushFetchFirst', and 'pushNeedsForce'
150 Advice shown when linkgit:git-push[1] fails due to a
151 non-fast-forward update to the current branch.
153 Advice to set 'push.default' to 'upstream' or 'current'
154 when you ran linkgit:git-push[1] and pushed 'matching
155 refs' by default (i.e. you did not provide an explicit
156 refspec, and no 'push.default' configuration was set)
157 and it resulted in a non-fast-forward error.
159 Advice shown when you ran linkgit:git-push[1] and pushed
160 'matching refs' explicitly (i.e. you used ':', or
161 specified a refspec that isn't your current branch) and
162 it resulted in a non-fast-forward error.
164 Shown when linkgit:git-push[1] rejects an update that
165 does not qualify for fast-forwarding (e.g., a tag.)
167 Shown when linkgit:git-push[1] rejects an update that
168 tries to overwrite a remote ref that points at an
169 object we do not have.
171 Shown when linkgit:git-push[1] rejects an update that
172 tries to overwrite a remote ref that points at an
173 object that is not a commit-ish, or make the remote
174 ref point at an object that is not a commit-ish.
176 Show directions on how to proceed from the current
177 state in the output of linkgit:git-status[1], in
178 the template shown when writing commit messages in
179 linkgit:git-commit[1], and in the help message shown
180 by linkgit:git-checkout[1] when switching branch.
182 Advise to consider using the `-u` option to linkgit:git-status[1]
183 when the command takes more than 2 seconds to enumerate untracked
186 Advice shown when linkgit:git-merge[1] refuses to
187 merge to avoid overwriting local changes.
189 Advice shown by various commands when conflicts
190 prevent the operation from being performed.
192 Advice on how to set your identity configuration when
193 your information is guessed from the system username and
196 Advice shown when you used linkgit:git-checkout[1] to
197 move to the detach HEAD state, to instruct how to create
198 a local branch after the fact.
200 Advice that shows the location of the patch file when
201 linkgit:git-am[1] fails to apply it.
203 In case of failure in the output of linkgit:git-rm[1],
204 show directions on how to proceed from the current state.
208 If false, the executable bit differences between the index and
209 the working tree are ignored; useful on broken filesystems like FAT.
210 See linkgit:git-update-index[1].
212 The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
213 will probe and set core.fileMode false if appropriate when the
214 repository is created.
217 If true, this option enables various workarounds to enable
218 Git to work better on filesystems that are not case sensitive,
219 like FAT. For example, if a directory listing finds
220 "makefile" when Git expects "Makefile", Git will assume
221 it is really the same file, and continue to remember it as
224 The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
225 will probe and set core.ignorecase true if appropriate when the repository
228 core.precomposeunicode::
229 This option is only used by Mac OS implementation of Git.
230 When core.precomposeunicode=true, Git reverts the unicode decomposition
231 of filenames done by Mac OS. This is useful when sharing a repository
232 between Mac OS and Linux or Windows.
233 (Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7).
234 When false, file names are handled fully transparent by Git,
235 which is backward compatible with older versions of Git.
238 If false, the ctime differences between the index and the
239 working tree are ignored; useful when the inode change time
240 is regularly modified by something outside Git (file system
241 crawlers and some backup systems).
242 See linkgit:git-update-index[1]. True by default.
245 Determines which stat fields to match between the index
246 and work tree. The user can set this to 'default' or
247 'minimal'. Default (or explicitly 'default'), is to check
248 all fields, including the sub-second part of mtime and ctime.
251 The commands that output paths (e.g. 'ls-files',
252 'diff'), when not given the `-z` option, will quote
253 "unusual" characters in the pathname by enclosing the
254 pathname in a double-quote pair and with backslashes the
255 same way strings in C source code are quoted. If this
256 variable is set to false, the bytes higher than 0x80 are
257 not quoted but output as verbatim. Note that double
258 quote, backslash and control characters are always
259 quoted without `-z` regardless of the setting of this
263 Sets the line ending type to use in the working directory for
264 files that have the `text` property set. Alternatives are
265 'lf', 'crlf' and 'native', which uses the platform's native
266 line ending. The default value is `native`. See
267 linkgit:gitattributes[5] for more information on end-of-line
271 If true, makes Git check if converting `CRLF` is reversible when
272 end-of-line conversion is active. Git will verify if a command
273 modifies a file in the work tree either directly or indirectly.
274 For example, committing a file followed by checking out the
275 same file should yield the original file in the work tree. If
276 this is not the case for the current setting of
277 `core.autocrlf`, Git will reject the file. The variable can
278 be set to "warn", in which case Git will only warn about an
279 irreversible conversion but continue the operation.
281 CRLF conversion bears a slight chance of corrupting data.
282 When it is enabled, Git will convert CRLF to LF during commit and LF to
283 CRLF during checkout. A file that contains a mixture of LF and
284 CRLF before the commit cannot be recreated by Git. For text
285 files this is the right thing to do: it corrects line endings
286 such that we have only LF line endings in the repository.
287 But for binary files that are accidentally classified as text the
288 conversion can corrupt data.
290 If you recognize such corruption early you can easily fix it by
291 setting the conversion type explicitly in .gitattributes. Right
292 after committing you still have the original file in your work
293 tree and this file is not yet corrupted. You can explicitly tell
294 Git that this file is binary and Git will handle the file
297 Unfortunately, the desired effect of cleaning up text files with
298 mixed line endings and the undesired effect of corrupting binary
299 files cannot be distinguished. In both cases CRLFs are removed
300 in an irreversible way. For text files this is the right thing
301 to do because CRLFs are line endings, while for binary files
302 converting CRLFs corrupts data.
304 Note, this safety check does not mean that a checkout will generate a
305 file identical to the original file for a different setting of
306 `core.eol` and `core.autocrlf`, but only for the current one. For
307 example, a text file with `LF` would be accepted with `core.eol=lf`
308 and could later be checked out with `core.eol=crlf`, in which case the
309 resulting file would contain `CRLF`, although the original file
310 contained `LF`. However, in both work trees the line endings would be
311 consistent, that is either all `LF` or all `CRLF`, but never mixed. A
312 file with mixed line endings would be reported by the `core.safecrlf`
316 Setting this variable to "true" is almost the same as setting
317 the `text` attribute to "auto" on all files except that text
318 files are not guaranteed to be normalized: files that contain
319 `CRLF` in the repository will not be touched. Use this
320 setting if you want to have `CRLF` line endings in your
321 working directory even though the repository does not have
322 normalized line endings. This variable can be set to 'input',
323 in which case no output conversion is performed.
326 If false, symbolic links are checked out as small plain files that
327 contain the link text. linkgit:git-update-index[1] and
328 linkgit:git-add[1] will not change the recorded type to regular
329 file. Useful on filesystems like FAT that do not support
332 The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
333 will probe and set core.symlinks false if appropriate when the repository
337 A "proxy command" to execute (as 'command host port') instead
338 of establishing direct connection to the remote server when
339 using the Git protocol for fetching. If the variable value is
340 in the "COMMAND for DOMAIN" format, the command is applied only
341 on hostnames ending with the specified domain string. This variable
342 may be set multiple times and is matched in the given order;
343 the first match wins.
345 Can be overridden by the 'GIT_PROXY_COMMAND' environment variable
346 (which always applies universally, without the special "for"
349 The special string `none` can be used as the proxy command to
350 specify that no proxy be used for a given domain pattern.
351 This is useful for excluding servers inside a firewall from
352 proxy use, while defaulting to a common proxy for external domains.
355 If true, commands which modify both the working tree and the index
356 will mark the updated paths with the "assume unchanged" bit in the
357 index. These marked files are then assumed to stay unchanged in the
358 working tree, until you mark them otherwise manually - Git will not
359 detect the file changes by lstat() calls. This is useful on systems
360 where those are very slow, such as Microsoft Windows.
361 See linkgit:git-update-index[1].
364 core.preferSymlinkRefs::
365 Instead of the default "symref" format for HEAD
366 and other symbolic reference files, use symbolic links.
367 This is sometimes needed to work with old scripts that
368 expect HEAD to be a symbolic link.
371 If true this repository is assumed to be 'bare' and has no
372 working directory associated with it. If this is the case a
373 number of commands that require a working directory will be
374 disabled, such as linkgit:git-add[1] or linkgit:git-merge[1].
376 This setting is automatically guessed by linkgit:git-clone[1] or
377 linkgit:git-init[1] when the repository was created. By default a
378 repository that ends in "/.git" is assumed to be not bare (bare =
379 false), while all other repositories are assumed to be bare (bare
383 Set the path to the root of the working tree.
384 This can be overridden by the GIT_WORK_TREE environment
385 variable and the '--work-tree' command line option.
386 The value can be an absolute path or relative to the path to
387 the .git directory, which is either specified by --git-dir
388 or GIT_DIR, or automatically discovered.
389 If --git-dir or GIT_DIR is specified but none of
390 --work-tree, GIT_WORK_TREE and core.worktree is specified,
391 the current working directory is regarded as the top level
392 of your working tree.
394 Note that this variable is honored even when set in a configuration
395 file in a ".git" subdirectory of a directory and its value differs
396 from the latter directory (e.g. "/path/to/.git/config" has
397 core.worktree set to "/different/path"), which is most likely a
398 misconfiguration. Running Git commands in the "/path/to" directory will
399 still use "/different/path" as the root of the work tree and can cause
400 confusion unless you know what you are doing (e.g. you are creating a
401 read-only snapshot of the same index to a location different from the
402 repository's usual working tree).
404 core.logAllRefUpdates::
405 Enable the reflog. Updates to a ref <ref> is logged to the file
406 "$GIT_DIR/logs/<ref>", by appending the new and old
407 SHA-1, the date/time and the reason of the update, but
408 only when the file exists. If this configuration
409 variable is set to true, missing "$GIT_DIR/logs/<ref>"
410 file is automatically created for branch heads (i.e. under
411 refs/heads/), remote refs (i.e. under refs/remotes/),
412 note refs (i.e. under refs/notes/), and the symbolic ref HEAD.
414 This information can be used to determine what commit
415 was the tip of a branch "2 days ago".
417 This value is true by default in a repository that has
418 a working directory associated with it, and false by
419 default in a bare repository.
421 core.repositoryFormatVersion::
422 Internal variable identifying the repository format and layout
425 core.sharedRepository::
426 When 'group' (or 'true'), the repository is made shareable between
427 several users in a group (making sure all the files and objects are
428 group-writable). When 'all' (or 'world' or 'everybody'), the
429 repository will be readable by all users, additionally to being
430 group-shareable. When 'umask' (or 'false'), Git will use permissions
431 reported by umask(2). When '0xxx', where '0xxx' is an octal number,
432 files in the repository will have this mode value. '0xxx' will override
433 user's umask value (whereas the other options will only override
434 requested parts of the user's umask value). Examples: '0660' will make
435 the repo read/write-able for the owner and group, but inaccessible to
436 others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a
437 repository that is group-readable but not group-writable.
438 See linkgit:git-init[1]. False by default.
440 core.warnAmbiguousRefs::
441 If true, Git will warn you if the ref name you passed it is ambiguous
442 and might match multiple refs in the repository. True by default.
445 An integer -1..9, indicating a default compression level.
446 -1 is the zlib default. 0 means no compression,
447 and 1..9 are various speed/size tradeoffs, 9 being slowest.
448 If set, this provides a default to other compression variables,
449 such as 'core.loosecompression' and 'pack.compression'.
451 core.loosecompression::
452 An integer -1..9, indicating the compression level for objects that
453 are not in a pack file. -1 is the zlib default. 0 means no
454 compression, and 1..9 are various speed/size tradeoffs, 9 being
455 slowest. If not set, defaults to core.compression. If that is
456 not set, defaults to 1 (best speed).
458 core.packedGitWindowSize::
459 Number of bytes of a pack file to map into memory in a
460 single mapping operation. Larger window sizes may allow
461 your system to process a smaller number of large pack files
462 more quickly. Smaller window sizes will negatively affect
463 performance due to increased calls to the operating system's
464 memory manager, but may improve performance when accessing
465 a large number of large pack files.
467 Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32
468 MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should
469 be reasonable for all users/operating systems. You probably do
470 not need to adjust this value.
472 Common unit suffixes of 'k', 'm', or 'g' are supported.
474 core.packedGitLimit::
475 Maximum number of bytes to map simultaneously into memory
476 from pack files. If Git needs to access more than this many
477 bytes at once to complete an operation it will unmap existing
478 regions to reclaim virtual address space within the process.
480 Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms.
481 This should be reasonable for all users/operating systems, except on
482 the largest projects. You probably do not need to adjust this value.
484 Common unit suffixes of 'k', 'm', or 'g' are supported.
486 core.deltaBaseCacheLimit::
487 Maximum number of bytes to reserve for caching base objects
488 that may be referenced by multiple deltified objects. By storing the
489 entire decompressed base objects in a cache Git is able
490 to avoid unpacking and decompressing frequently used base
491 objects multiple times.
493 Default is 16 MiB on all platforms. This should be reasonable
494 for all users/operating systems, except on the largest projects.
495 You probably do not need to adjust this value.
497 Common unit suffixes of 'k', 'm', or 'g' are supported.
499 core.bigFileThreshold::
500 Files larger than this size are stored deflated, without
501 attempting delta compression. Storing large files without
502 delta compression avoids excessive memory usage, at the
503 slight expense of increased disk usage.
505 Default is 512 MiB on all platforms. This should be reasonable
506 for most projects as source code and other text files can still
507 be delta compressed, but larger binary media files won't be.
509 Common unit suffixes of 'k', 'm', or 'g' are supported.
512 In addition to '.gitignore' (per-directory) and
513 '.git/info/exclude', Git looks into this file for patterns
514 of files which are not meant to be tracked. "`~/`" is expanded
515 to the value of `$HOME` and "`~user/`" to the specified user's
516 home directory. Its default value is $XDG_CONFIG_HOME/git/ignore.
517 If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore
518 is used instead. See linkgit:gitignore[5].
521 Some commands (e.g. svn and http interfaces) that interactively
522 ask for a password can be told to use an external program given
523 via the value of this variable. Can be overridden by the 'GIT_ASKPASS'
524 environment variable. If not set, fall back to the value of the
525 'SSH_ASKPASS' environment variable or, failing that, a simple password
526 prompt. The external program shall be given a suitable prompt as
527 command line argument and write the password on its STDOUT.
529 core.attributesfile::
530 In addition to '.gitattributes' (per-directory) and
531 '.git/info/attributes', Git looks into this file for attributes
532 (see linkgit:gitattributes[5]). Path expansions are made the same
533 way as for `core.excludesfile`. Its default value is
534 $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not
535 set or empty, $HOME/.config/git/attributes is used instead.
538 Commands such as `commit` and `tag` that lets you edit
539 messages by launching an editor uses the value of this
540 variable when it is set, and the environment variable
541 `GIT_EDITOR` is not set. See linkgit:git-var[1].
544 Commands such as `commit` and `tag` that lets you edit
545 messages consider a line that begins with this character
546 commented, and removes them after the editor returns
550 Text editor used by `git rebase -i` for editing the rebase instruction file.
551 The value is meant to be interpreted by the shell when it is used.
552 It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
553 When not configured the default commit message editor is used instead.
556 Text viewer for use by Git commands (e.g., 'less'). The value
557 is meant to be interpreted by the shell. The order of preference
558 is the `$GIT_PAGER` environment variable, then `core.pager`
559 configuration, then `$PAGER`, and then the default chosen at
560 compile time (usually 'less').
562 When the `LESS` environment variable is unset, Git sets it to `FRSX`
563 (if `LESS` environment variable is set, Git does not change it at
564 all). If you want to selectively override Git's default setting
565 for `LESS`, you can set `core.pager` to e.g. `less -+S`. This will
566 be passed to the shell by Git, which will translate the final
567 command to `LESS=FRSX less -+S`. The environment tells the command
568 to set the `S` option to chop long lines but the command line
569 resets it to the default to fold long lines.
571 Likewise, when the `LV` environment variable is unset, Git sets it
572 to `-c`. You can override this setting by exporting `LV` with
573 another value or setting `core.pager` to `lv +c`.
576 A comma separated list of common whitespace problems to
577 notice. 'git diff' will use `color.diff.whitespace` to
578 highlight them, and 'git apply --whitespace=error' will
579 consider them as errors. You can prefix `-` to disable
580 any of them (e.g. `-trailing-space`):
582 * `blank-at-eol` treats trailing whitespaces at the end of the line
583 as an error (enabled by default).
584 * `space-before-tab` treats a space character that appears immediately
585 before a tab character in the initial indent part of the line as an
586 error (enabled by default).
587 * `indent-with-non-tab` treats a line that is indented with space
588 characters instead of the equivalent tabs as an error (not enabled by
590 * `tab-in-indent` treats a tab character in the initial indent part of
591 the line as an error (not enabled by default).
592 * `blank-at-eof` treats blank lines added at the end of file as an error
593 (enabled by default).
594 * `trailing-space` is a short-hand to cover both `blank-at-eol` and
596 * `cr-at-eol` treats a carriage-return at the end of line as
597 part of the line terminator, i.e. with it, `trailing-space`
598 does not trigger if the character before such a carriage-return
599 is not a whitespace (not enabled by default).
600 * `tabwidth=<n>` tells how many character positions a tab occupies; this
601 is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent`
602 errors. The default tab width is 8. Allowed values are 1 to 63.
604 core.fsyncobjectfiles::
605 This boolean will enable 'fsync()' when writing object files.
607 This is a total waste of time and effort on a filesystem that orders
608 data writes properly, but can be useful for filesystems that do not use
609 journalling (traditional UNIX filesystems) or that only journal metadata
610 and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback").
613 Enable parallel index preload for operations like 'git diff'
615 This can speed up operations like 'git diff' and 'git status' especially
616 on filesystems like NFS that have weak caching semantics and thus
617 relatively high IO latencies. With this set to 'true', Git will do the
618 index comparison to the filesystem data in parallel, allowing
622 You can set this to 'link', in which case a hardlink followed by
623 a delete of the source are used to make sure that object creation
624 will not overwrite existing objects.
626 On some file system/operating system combinations, this is unreliable.
627 Set this config setting to 'rename' there; However, This will remove the
628 check that makes sure that existing object files will not get overwritten.
631 When showing commit messages, also show notes which are stored in
632 the given ref. The ref must be fully qualified. If the given
633 ref does not exist, it is not an error but means that no
634 notes should be printed.
636 This setting defaults to "refs/notes/commits", and it can be overridden by
637 the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1].
639 core.sparseCheckout::
640 Enable "sparse checkout" feature. See section "Sparse checkout" in
641 linkgit:git-read-tree[1] for more information.
644 Set the length object names are abbreviated to. If unspecified,
645 many commands abbreviate to 7 hexdigits, which may not be enough
646 for abbreviated object names to stay unique for sufficiently long
651 Tells 'git add' to continue adding files when some files cannot be
652 added due to indexing errors. Equivalent to the '--ignore-errors'
653 option of linkgit:git-add[1]. Older versions of Git accept only
654 `add.ignore-errors`, which does not follow the usual naming
655 convention for configuration variables. Newer versions of Git
656 honor `add.ignoreErrors` as well.
659 Command aliases for the linkgit:git[1] command wrapper - e.g.
660 after defining "alias.last = cat-file commit HEAD", the invocation
661 "git last" is equivalent to "git cat-file commit HEAD". To avoid
662 confusion and troubles with script usage, aliases that
663 hide existing Git commands are ignored. Arguments are split by
664 spaces, the usual shell quoting and escaping is supported.
665 quote pair and a backslash can be used to quote them.
667 If the alias expansion is prefixed with an exclamation point,
668 it will be treated as a shell command. For example, defining
669 "alias.new = !gitk --all --not ORIG_HEAD", the invocation
670 "git new" is equivalent to running the shell command
671 "gitk --all --not ORIG_HEAD". Note that shell commands will be
672 executed from the top-level directory of a repository, which may
673 not necessarily be the current directory.
674 'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix'
675 from the original current directory. See linkgit:git-rev-parse[1].
678 If true, git-am will call git-mailsplit for patches in mbox format
679 with parameter '--keep-cr'. In this case git-mailsplit will
680 not remove `\r` from lines ending with `\r\n`. Can be overridden
681 by giving '--no-keep-cr' from the command line.
682 See linkgit:git-am[1], linkgit:git-mailsplit[1].
684 apply.ignorewhitespace::
685 When set to 'change', tells 'git apply' to ignore changes in
686 whitespace, in the same way as the '--ignore-space-change'
688 When set to one of: no, none, never, false tells 'git apply' to
689 respect all whitespace differences.
690 See linkgit:git-apply[1].
693 Tells 'git apply' how to handle whitespaces, in the same way
694 as the '--whitespace' option. See linkgit:git-apply[1].
696 branch.autosetupmerge::
697 Tells 'git branch' and 'git checkout' to set up new branches
698 so that linkgit:git-pull[1] will appropriately merge from the
699 starting point branch. Note that even if this option is not set,
700 this behavior can be chosen per-branch using the `--track`
701 and `--no-track` options. The valid settings are: `false` -- no
702 automatic setup is done; `true` -- automatic setup is done when the
703 starting point is a remote-tracking branch; `always` --
704 automatic setup is done when the starting point is either a
705 local branch or remote-tracking
706 branch. This option defaults to true.
708 branch.autosetuprebase::
709 When a new branch is created with 'git branch' or 'git checkout'
710 that tracks another branch, this variable tells Git to set
711 up pull to rebase instead of merge (see "branch.<name>.rebase").
712 When `never`, rebase is never automatically set to true.
713 When `local`, rebase is set to true for tracked branches of
714 other local branches.
715 When `remote`, rebase is set to true for tracked branches of
716 remote-tracking branches.
717 When `always`, rebase will be set to true for all tracking
719 See "branch.autosetupmerge" for details on how to set up a
720 branch to track another branch.
721 This option defaults to never.
723 branch.<name>.remote::
724 When on branch <name>, it tells 'git fetch' and 'git push'
725 which remote to fetch from/push to. The remote to push to
726 may be overridden with `remote.pushdefault` (for all branches).
727 The remote to push to, for the current branch, may be further
728 overridden by `branch.<name>.pushremote`. If no remote is
729 configured, or if you are not on any branch, it defaults to
730 `origin` for fetching and `remote.pushdefault` for pushing.
731 Additionally, `.` (a period) is the current local repository
732 (a dot-repository), see `branch.<name>.merge`'s final note below.
734 branch.<name>.pushremote::
735 When on branch <name>, it overrides `branch.<name>.remote` for
736 pushing. It also overrides `remote.pushdefault` for pushing
737 from branch <name>. When you pull from one place (e.g. your
738 upstream) and push to another place (e.g. your own publishing
739 repository), you would want to set `remote.pushdefault` to
740 specify the remote to push to for all branches, and use this
741 option to override it for a specific branch.
743 branch.<name>.merge::
744 Defines, together with branch.<name>.remote, the upstream branch
745 for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which
746 branch to merge and can also affect 'git push' (see push.default).
747 When in branch <name>, it tells 'git fetch' the default
748 refspec to be marked for merging in FETCH_HEAD. The value is
749 handled like the remote part of a refspec, and must match a
750 ref which is fetched from the remote given by
751 "branch.<name>.remote".
752 The merge information is used by 'git pull' (which at first calls
753 'git fetch') to lookup the default branch for merging. Without
754 this option, 'git pull' defaults to merge the first refspec fetched.
755 Specify multiple values to get an octopus merge.
756 If you wish to setup 'git pull' so that it merges into <name> from
757 another branch in the local repository, you can point
758 branch.<name>.merge to the desired branch, and use the relative path
759 setting `.` (a period) for branch.<name>.remote.
761 branch.<name>.mergeoptions::
762 Sets default options for merging into branch <name>. The syntax and
763 supported options are the same as those of linkgit:git-merge[1], but
764 option values containing whitespace characters are currently not
767 branch.<name>.rebase::
768 When true, rebase the branch <name> on top of the fetched branch,
769 instead of merging the default branch from the default remote when
770 "git pull" is run. See "pull.rebase" for doing this in a non
771 branch-specific manner.
773 When preserve, also pass `--preserve-merges` along to 'git rebase'
774 so that locally committed merge commits will not be flattened
775 by running 'git pull'.
777 *NOTE*: this is a possibly dangerous operation; do *not* use
778 it unless you understand the implications (see linkgit:git-rebase[1]
781 branch.<name>.description::
782 Branch description, can be edited with
783 `git branch --edit-description`. Branch description is
784 automatically added in the format-patch cover letter or
785 request-pull summary.
788 Specify the command to invoke the specified browser. The
789 specified command is evaluated in shell with the URLs passed
790 as arguments. (See linkgit:git-web{litdd}browse[1].)
792 browser.<tool>.path::
793 Override the path for the given tool that may be used to
794 browse HTML help (see '-w' option in linkgit:git-help[1]) or a
795 working repository in gitweb (see linkgit:git-instaweb[1]).
798 A boolean to make git-clean do nothing unless given -f,
799 -i or -n. Defaults to true.
802 A boolean to enable/disable color in the output of
803 linkgit:git-branch[1]. May be set to `always`,
804 `false` (or `never`) or `auto` (or `true`), in which case colors are used
805 only when the output is to a terminal. Defaults to false.
807 color.branch.<slot>::
808 Use customized color for branch coloration. `<slot>` is one of
809 `current` (the current branch), `local` (a local branch),
810 `remote` (a remote-tracking branch in refs/remotes/),
811 `upstream` (upstream tracking branch), `plain` (other
814 The value for these configuration variables is a list of colors (at most
815 two) and attributes (at most one), separated by spaces. The colors
816 accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`,
817 `magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`,
818 `blink` and `reverse`. The first color given is the foreground; the
819 second is the background. The position of the attribute, if any,
823 Whether to use ANSI escape sequences to add color to patches.
824 If this is set to `always`, linkgit:git-diff[1],
825 linkgit:git-log[1], and linkgit:git-show[1] will use color
826 for all patches. If it is set to `true` or `auto`, those
827 commands will only use color when output is to the terminal.
830 This does not affect linkgit:git-format-patch[1] nor the
831 'git-diff-{asterisk}' plumbing commands. Can be overridden on the
832 command line with the `--color[=<when>]` option.
835 Use customized color for diff colorization. `<slot>` specifies
836 which part of the patch to use the specified color, and is one
837 of `plain` (context text), `meta` (metainformation), `frag`
838 (hunk header), 'func' (function in hunk header), `old` (removed lines),
839 `new` (added lines), `commit` (commit headers), or `whitespace`
840 (highlighting whitespace errors). The values of these variables may be
841 specified as in color.branch.<slot>.
843 color.decorate.<slot>::
844 Use customized color for 'git log --decorate' output. `<slot>` is one
845 of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local
846 branches, remote-tracking branches, tags, stash and HEAD, respectively.
849 When set to `always`, always highlight matches. When `false` (or
850 `never`), never. When set to `true` or `auto`, use color only
851 when the output is written to the terminal. Defaults to `false`.
854 Use customized color for grep colorization. `<slot>` specifies which
855 part of the line to use the specified color, and is one of
859 non-matching text in context lines (when using `-A`, `-B`, or `-C`)
861 filename prefix (when not using `-h`)
863 function name lines (when using `-p`)
865 line number prefix (when using `-n`)
869 non-matching text in selected lines
871 separators between fields on a line (`:`, `-`, and `=`)
872 and between hunks (`--`)
875 The values of these variables may be specified as in color.branch.<slot>.
878 When set to `always`, always use colors for interactive prompts
879 and displays (such as those used by "git-add --interactive" and
880 "git-clean --interactive"). When false (or `never`), never.
881 When set to `true` or `auto`, use colors only when the output is
882 to the terminal. Defaults to false.
884 color.interactive.<slot>::
885 Use customized color for 'git add --interactive' and 'git clean
886 --interactive' output. `<slot>` may be `prompt`, `header`, `help`
887 or `error`, for four distinct types of normal output from
888 interactive commands. The values of these variables may be
889 specified as in color.branch.<slot>.
892 A boolean to enable/disable colored output when the pager is in
893 use (default is true).
896 A boolean to enable/disable color in the output of
897 linkgit:git-show-branch[1]. May be set to `always`,
898 `false` (or `never`) or `auto` (or `true`), in which case colors are used
899 only when the output is to a terminal. Defaults to false.
902 A boolean to enable/disable color in the output of
903 linkgit:git-status[1]. May be set to `always`,
904 `false` (or `never`) or `auto` (or `true`), in which case colors are used
905 only when the output is to a terminal. Defaults to false.
907 color.status.<slot>::
908 Use customized color for status colorization. `<slot>` is
909 one of `header` (the header text of the status message),
910 `added` or `updated` (files which are added but not committed),
911 `changed` (files which are changed but not added in the index),
912 `untracked` (files which are not tracked by Git),
913 `branch` (the current branch), or
914 `nobranch` (the color the 'no branch' warning is shown in, defaulting
915 to red). The values of these variables may be specified as in
919 This variable determines the default value for variables such
920 as `color.diff` and `color.grep` that control the use of color
921 per command family. Its scope will expand as more commands learn
922 configuration to set a default for the `--color` option. Set it
923 to `false` or `never` if you prefer Git commands not to use
924 color unless enabled explicitly with some other configuration
925 or the `--color` option. Set it to `always` if you want all
926 output not intended for machine consumption to use color, to
927 `true` or `auto` (this is the default since Git 1.8.4) if you
928 want such output to use color when written to the terminal.
931 Specify whether supported commands should output in columns.
932 This variable consists of a list of tokens separated by spaces
935 These options control when the feature should be enabled
936 (defaults to 'never'):
940 always show in columns
942 never show in columns
944 show in columns if the output is to the terminal
947 These options control layout (defaults to 'column'). Setting any
948 of these implies 'always' if none of 'always', 'never', or 'auto' are
953 fill columns before rows
955 fill rows before columns
960 Finally, these options can be combined with a layout option (defaults
965 make unequal size columns to utilize more space
967 make equal size columns
971 Specify whether to output branch listing in `git branch` in columns.
972 See `column.ui` for details.
975 Specify the layout when list items in `git clean -i`, which always
976 shows files and directories in columns. See `column.ui` for details.
979 Specify whether to output untracked files in `git status` in columns.
980 See `column.ui` for details.
983 Specify whether to output tag listing in `git tag` in columns.
984 See `column.ui` for details.
987 This setting overrides the default of the `--cleanup` option in
988 `git commit`. See linkgit:git-commit[1] for details. Changing the
989 default can be useful when you always want to keep lines that begin
990 with comment character `#` in your log message, in which case you
991 would do `git config commit.cleanup whitespace` (note that you will
992 have to remove the help lines that begin with `#` in the commit log
993 template yourself, if you do this).
996 A boolean to enable/disable inclusion of status information in the
997 commit message template when using an editor to prepare the commit
998 message. Defaults to true.
1001 Specify a file to use as the template for new commit messages.
1002 "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the
1003 specified user's home directory.
1006 Specify an external helper to be called when a username or
1007 password credential is needed; the helper may consult external
1008 storage to avoid prompting the user for the credentials. See
1009 linkgit:gitcredentials[7] for details.
1011 credential.useHttpPath::
1012 When acquiring credentials, consider the "path" component of an http
1013 or https URL to be important. Defaults to false. See
1014 linkgit:gitcredentials[7] for more information.
1016 credential.username::
1017 If no username is set for a network authentication, use this username
1018 by default. See credential.<context>.* below, and
1019 linkgit:gitcredentials[7].
1021 credential.<url>.*::
1022 Any of the credential.* options above can be applied selectively to
1023 some credentials. For example "credential.https://example.com.username"
1024 would set the default username only for https connections to
1025 example.com. See linkgit:gitcredentials[7] for details on how URLs are
1028 include::diff-config.txt[]
1030 difftool.<tool>.path::
1031 Override the path for the given tool. This is useful in case
1032 your tool is not in the PATH.
1034 difftool.<tool>.cmd::
1035 Specify the command to invoke the specified diff tool.
1036 The specified command is evaluated in shell with the following
1037 variables available: 'LOCAL' is set to the name of the temporary
1038 file containing the contents of the diff pre-image and 'REMOTE'
1039 is set to the name of the temporary file containing the contents
1040 of the diff post-image.
1043 Prompt before each invocation of the diff tool.
1045 fetch.recurseSubmodules::
1046 This option can be either set to a boolean value or to 'on-demand'.
1047 Setting it to a boolean changes the behavior of fetch and pull to
1048 unconditionally recurse into submodules when set to true or to not
1049 recurse at all when set to false. When set to 'on-demand' (the default
1050 value), fetch and pull will only recurse into a populated submodule
1051 when its superproject retrieves a commit that updates the submodule's
1055 If it is set to true, git-fetch-pack will check all fetched
1056 objects. It will abort in the case of a malformed object or a
1057 broken link. The result of an abort are only dangling objects.
1058 Defaults to false. If not set, the value of `transfer.fsckObjects`
1062 If the number of objects fetched over the Git native
1063 transfer is below this
1064 limit, then the objects will be unpacked into loose object
1065 files. However if the number of received objects equals or
1066 exceeds this limit then the received pack will be stored as
1067 a pack, after adding any missing delta bases. Storing the
1068 pack from a push can make the push operation complete faster,
1069 especially on slow filesystems. If not set, the value of
1070 `transfer.unpackLimit` is used instead.
1073 If true, fetch will automatically behave as if the `--prune`
1074 option was given on the command line. See also `remote.<name>.prune`.
1077 Enable multipart/mixed attachments as the default for
1078 'format-patch'. The value can also be a double quoted string
1079 which will enable attachments as the default and set the
1080 value as the boundary. See the --attach option in
1081 linkgit:git-format-patch[1].
1084 A boolean which can enable or disable sequence numbers in patch
1085 subjects. It defaults to "auto" which enables it only if there
1086 is more than one patch. It can be enabled or disabled for all
1087 messages by setting it to "true" or "false". See --numbered
1088 option in linkgit:git-format-patch[1].
1091 Additional email headers to include in a patch to be submitted
1092 by mail. See linkgit:git-format-patch[1].
1096 Additional recipients to include in a patch to be submitted
1097 by mail. See the --to and --cc options in
1098 linkgit:git-format-patch[1].
1100 format.subjectprefix::
1101 The default for format-patch is to output files with the '[PATCH]'
1102 subject prefix. Use this variable to change that prefix.
1105 The default for format-patch is to output a signature containing
1106 the Git version number. Use this variable to change that default.
1107 Set this variable to the empty string ("") to suppress
1108 signature generation.
1111 The default for format-patch is to output files with the suffix
1112 `.patch`. Use this variable to change that suffix (make sure to
1113 include the dot if you want it).
1116 The default pretty format for log/show/whatchanged command,
1117 See linkgit:git-log[1], linkgit:git-show[1],
1118 linkgit:git-whatchanged[1].
1121 The default threading style for 'git format-patch'. Can be
1122 a boolean value, or `shallow` or `deep`. `shallow` threading
1123 makes every mail a reply to the head of the series,
1124 where the head is chosen from the cover letter, the
1125 `--in-reply-to`, and the first patch mail, in this order.
1126 `deep` threading makes every mail a reply to the previous one.
1127 A true boolean value is the same as `shallow`, and a false
1128 value disables threading.
1131 A boolean value which lets you enable the `-s/--signoff` option of
1132 format-patch by default. *Note:* Adding the Signed-off-by: line to a
1133 patch should be a conscious act and means that you certify you have
1134 the rights to submit this work under the same open source license.
1135 Please see the 'SubmittingPatches' document for further discussion.
1137 format.coverLetter::
1138 A boolean that controls whether to generate a cover-letter when
1139 format-patch is invoked, but in addition can be set to "auto", to
1140 generate a cover-letter only when there's more than one patch.
1142 filter.<driver>.clean::
1143 The command which is used to convert the content of a worktree
1144 file to a blob upon checkin. See linkgit:gitattributes[5] for
1147 filter.<driver>.smudge::
1148 The command which is used to convert the content of a blob
1149 object to a worktree file upon checkout. See
1150 linkgit:gitattributes[5] for details.
1152 gc.aggressiveWindow::
1153 The window size parameter used in the delta compression
1154 algorithm used by 'git gc --aggressive'. This defaults
1158 When there are approximately more than this many loose
1159 objects in the repository, `git gc --auto` will pack them.
1160 Some Porcelain commands use this command to perform a
1161 light-weight garbage collection from time to time. The
1162 default value is 6700. Setting this to 0 disables it.
1165 When there are more than this many packs that are not
1166 marked with `*.keep` file in the repository, `git gc
1167 --auto` consolidates them into one larger pack. The
1168 default value is 50. Setting this to 0 disables it.
1171 Running `git pack-refs` in a repository renders it
1172 unclonable by Git versions prior to 1.5.1.2 over dumb
1173 transports such as HTTP. This variable determines whether
1174 'git gc' runs `git pack-refs`. This can be set to `notbare`
1175 to enable it within all non-bare repos or it can be set to a
1176 boolean value. The default is `true`.
1179 When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'.
1180 Override the grace period with this config variable. The value
1181 "now" may be used to disable this grace period and always prune
1182 unreachable objects immediately.
1185 gc.<pattern>.reflogexpire::
1186 'git reflog expire' removes reflog entries older than
1187 this time; defaults to 90 days. With "<pattern>" (e.g.
1188 "refs/stash") in the middle the setting applies only to
1189 the refs that match the <pattern>.
1191 gc.reflogexpireunreachable::
1192 gc.<ref>.reflogexpireunreachable::
1193 'git reflog expire' removes reflog entries older than
1194 this time and are not reachable from the current tip;
1195 defaults to 30 days. With "<pattern>" (e.g. "refs/stash")
1196 in the middle, the setting applies only to the refs that
1197 match the <pattern>.
1200 Records of conflicted merge you resolved earlier are
1201 kept for this many days when 'git rerere gc' is run.
1202 The default is 60 days. See linkgit:git-rerere[1].
1204 gc.rerereunresolved::
1205 Records of conflicted merge you have not resolved are
1206 kept for this many days when 'git rerere gc' is run.
1207 The default is 15 days. See linkgit:git-rerere[1].
1209 gitcvs.commitmsgannotation::
1210 Append this string to each commit message. Set to empty string
1211 to disable this feature. Defaults to "via git-CVS emulator".
1214 Whether the CVS server interface is enabled for this repository.
1215 See linkgit:git-cvsserver[1].
1218 Path to a log file where the CVS server interface well... logs
1219 various stuff. See linkgit:git-cvsserver[1].
1221 gitcvs.usecrlfattr::
1222 If true, the server will look up the end-of-line conversion
1223 attributes for files to determine the '-k' modes to use. If
1224 the attributes force Git to treat a file as text,
1225 the '-k' mode will be left blank so CVS clients will
1226 treat it as text. If they suppress text conversion, the file
1227 will be set with '-kb' mode, which suppresses any newline munging
1228 the client might otherwise do. If the attributes do not allow
1229 the file type to be determined, then 'gitcvs.allbinary' is
1230 used. See linkgit:gitattributes[5].
1233 This is used if 'gitcvs.usecrlfattr' does not resolve
1234 the correct '-kb' mode to use. If true, all
1235 unresolved files are sent to the client in
1236 mode '-kb'. This causes the client to treat them
1237 as binary files, which suppresses any newline munging it
1238 otherwise might do. Alternatively, if it is set to "guess",
1239 then the contents of the file are examined to decide if
1240 it is binary, similar to 'core.autocrlf'.
1243 Database used by git-cvsserver to cache revision information
1244 derived from the Git repository. The exact meaning depends on the
1245 used database driver, for SQLite (which is the default driver) this
1246 is a filename. Supports variable substitution (see
1247 linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
1248 Default: '%Ggitcvs.%m.sqlite'
1251 Used Perl DBI driver. You can specify any available driver
1252 for this here, but it might not work. git-cvsserver is tested
1253 with 'DBD::SQLite', reported to work with 'DBD::Pg', and
1254 reported *not* to work with 'DBD::mysql'. Experimental feature.
1255 May not contain double colons (`:`). Default: 'SQLite'.
1256 See linkgit:git-cvsserver[1].
1258 gitcvs.dbuser, gitcvs.dbpass::
1259 Database user and password. Only useful if setting 'gitcvs.dbdriver',
1260 since SQLite has no concept of database users and/or passwords.
1261 'gitcvs.dbuser' supports variable substitution (see
1262 linkgit:git-cvsserver[1] for details).
1264 gitcvs.dbTableNamePrefix::
1265 Database table name prefix. Prepended to the names of any
1266 database tables used, allowing a single database to be used
1267 for several repositories. Supports variable substitution (see
1268 linkgit:git-cvsserver[1] for details). Any non-alphabetic
1269 characters will be replaced with underscores.
1271 All gitcvs variables except for 'gitcvs.usecrlfattr' and
1272 'gitcvs.allbinary' can also be specified as
1273 'gitcvs.<access_method>.<varname>' (where 'access_method'
1274 is one of "ext" and "pserver") to make them apply only for the given
1278 gitweb.description::
1281 See linkgit:gitweb[1] for description.
1289 gitweb.remote_heads::
1292 See linkgit:gitweb.conf[5] for description.
1295 If set to true, enable '-n' option by default.
1298 Set the default matching behavior. Using a value of 'basic', 'extended',
1299 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp',
1300 '--fixed-strings', or '--perl-regexp' option accordingly, while the
1301 value 'default' will return to the default matching behavior.
1303 grep.extendedRegexp::
1304 If set to true, enable '--extended-regexp' option by default. This
1305 option is ignored when the 'grep.patternType' option is set to a value
1306 other than 'default'.
1309 Use this custom program instead of "gpg" found on $PATH when
1310 making or verifying a PGP signature. The program must support the
1311 same command line interface as GPG, namely, to verify a detached
1312 signature, "gpg --verify $file - <$signature" is run, and the
1313 program is expected to signal a good signature by exiting with
1314 code 0, and to generate an ascii-armored detached signature, the
1315 standard input of "gpg -bsau $key" is fed with the contents to be
1316 signed, and the program is expected to send the result to its
1319 gui.commitmsgwidth::
1320 Defines how wide the commit message window is in the
1321 linkgit:git-gui[1]. "75" is the default.
1324 Specifies how many context lines should be used in calls to diff
1325 made by the linkgit:git-gui[1]. The default is "5".
1328 Specifies the default encoding to use for displaying of
1329 file contents in linkgit:git-gui[1] and linkgit:gitk[1].
1330 It can be overridden by setting the 'encoding' attribute
1331 for relevant files (see linkgit:gitattributes[5]).
1332 If this option is not set, the tools default to the
1335 gui.matchtrackingbranch::
1336 Determines if new branches created with linkgit:git-gui[1] should
1337 default to tracking remote branches with matching names or
1338 not. Default: "false".
1340 gui.newbranchtemplate::
1341 Is used as suggested name when creating new branches using the
1344 gui.pruneduringfetch::
1345 "true" if linkgit:git-gui[1] should prune remote-tracking branches when
1346 performing a fetch. The default value is "false".
1349 Determines if linkgit:git-gui[1] should trust the file modification
1350 timestamp or not. By default the timestamps are not trusted.
1352 gui.spellingdictionary::
1353 Specifies the dictionary used for spell checking commit messages in
1354 the linkgit:git-gui[1]. When set to "none" spell checking is turned
1358 If true, 'git gui blame' uses `-C` instead of `-C -C` for original
1359 location detection. It makes blame significantly faster on huge
1360 repositories at the expense of less thorough copy detection.
1362 gui.copyblamethreshold::
1363 Specifies the threshold to use in 'git gui blame' original location
1364 detection, measured in alphanumeric characters. See the
1365 linkgit:git-blame[1] manual for more information on copy detection.
1367 gui.blamehistoryctx::
1368 Specifies the radius of history context in days to show in
1369 linkgit:gitk[1] for the selected commit, when the `Show History
1370 Context` menu item is invoked from 'git gui blame'. If this
1371 variable is set to zero, the whole history is shown.
1373 guitool.<name>.cmd::
1374 Specifies the shell command line to execute when the corresponding item
1375 of the linkgit:git-gui[1] `Tools` menu is invoked. This option is
1376 mandatory for every tool. The command is executed from the root of
1377 the working directory, and in the environment it receives the name of
1378 the tool as 'GIT_GUITOOL', the name of the currently selected file as
1379 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if
1380 the head is detached, 'CUR_BRANCH' is empty).
1382 guitool.<name>.needsfile::
1383 Run the tool only if a diff is selected in the GUI. It guarantees
1384 that 'FILENAME' is not empty.
1386 guitool.<name>.noconsole::
1387 Run the command silently, without creating a window to display its
1390 guitool.<name>.norescan::
1391 Don't rescan the working directory for changes after the tool
1394 guitool.<name>.confirm::
1395 Show a confirmation dialog before actually running the tool.
1397 guitool.<name>.argprompt::
1398 Request a string argument from the user, and pass it to the tool
1399 through the 'ARGS' environment variable. Since requesting an
1400 argument implies confirmation, the 'confirm' option has no effect
1401 if this is enabled. If the option is set to 'true', 'yes', or '1',
1402 the dialog uses a built-in generic prompt; otherwise the exact
1403 value of the variable is used.
1405 guitool.<name>.revprompt::
1406 Request a single valid revision from the user, and set the
1407 'REVISION' environment variable. In other aspects this option
1408 is similar to 'argprompt', and can be used together with it.
1410 guitool.<name>.revunmerged::
1411 Show only unmerged branches in the 'revprompt' subdialog.
1412 This is useful for tools similar to merge or rebase, but not
1413 for things like checkout or reset.
1415 guitool.<name>.title::
1416 Specifies the title to use for the prompt dialog. The default
1419 guitool.<name>.prompt::
1420 Specifies the general prompt string to display at the top of
1421 the dialog, before subsections for 'argprompt' and 'revprompt'.
1422 The default value includes the actual command.
1425 Specify the browser that will be used to display help in the
1426 'web' format. See linkgit:git-help[1].
1429 Override the default help format used by linkgit:git-help[1].
1430 Values 'man', 'info', 'web' and 'html' are supported. 'man' is
1431 the default. 'web' and 'html' are the same.
1434 Automatically correct and execute mistyped commands after
1435 waiting for the given number of deciseconds (0.1 sec). If more
1436 than one command can be deduced from the entered text, nothing
1437 will be executed. If the value of this option is negative,
1438 the corrected command will be executed immediately. If the
1439 value is 0 - the command will be just shown but not executed.
1440 This is the default.
1443 Specify the path where the HTML documentation resides. File system paths
1444 and URLs are supported. HTML pages will be prefixed with this path when
1445 help is displayed in the 'web' format. This defaults to the documentation
1446 path of your Git installation.
1449 Override the HTTP proxy, normally configured using the 'http_proxy',
1450 'https_proxy', and 'all_proxy' environment variables (see
1451 `curl(1)`). This can be overridden on a per-remote basis; see
1455 File containing previously stored cookie lines which should be used
1456 in the Git http session, if they match the server. The file format
1457 of the file to read cookies from should be plain HTTP headers or
1458 the Netscape/Mozilla cookie file format (see linkgit:curl[1]).
1459 NOTE that the file specified with http.cookiefile is only used as
1460 input unless http.saveCookies is set.
1463 If set, store cookies received during requests to the file specified by
1464 http.cookiefile. Has no effect if http.cookiefile is unset.
1467 Whether to verify the SSL certificate when fetching or pushing
1468 over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment
1472 File containing the SSL certificate when fetching or pushing
1473 over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment
1477 File containing the SSL private key when fetching or pushing
1478 over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment
1481 http.sslCertPasswordProtected::
1482 Enable Git's password prompt for the SSL certificate. Otherwise
1483 OpenSSL will prompt the user, possibly many times, if the
1484 certificate or private key is encrypted. Can be overridden by the
1485 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable.
1488 File containing the certificates to verify the peer with when
1489 fetching or pushing over HTTPS. Can be overridden by the
1490 'GIT_SSL_CAINFO' environment variable.
1493 Path containing files with the CA certificates to verify the peer
1494 with when fetching or pushing over HTTPS. Can be overridden
1495 by the 'GIT_SSL_CAPATH' environment variable.
1498 Attempt to use AUTH SSL/TLS and encrypted data transfers
1499 when connecting via regular FTP protocol. This might be needed
1500 if the FTP server requires it for security reasons or you wish
1501 to connect securely whenever remote FTP server supports it.
1502 Default is false since it might trigger certificate verification
1503 errors on misconfigured servers.
1506 How many HTTP requests to launch in parallel. Can be overridden
1507 by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5.
1510 The number of curl sessions (counted across slots) to be kept across
1511 requests. They will not be ended with curl_easy_cleanup() until
1512 http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this
1513 value will be capped at 1. Defaults to 1.
1516 Maximum size in bytes of the buffer used by smart HTTP
1517 transports when POSTing data to the remote system.
1518 For requests larger than this buffer size, HTTP/1.1 and
1519 Transfer-Encoding: chunked is used to avoid creating a
1520 massive pack file locally. Default is 1 MiB, which is
1521 sufficient for most requests.
1523 http.lowSpeedLimit, http.lowSpeedTime::
1524 If the HTTP transfer speed is less than 'http.lowSpeedLimit'
1525 for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
1526 Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and
1527 'GIT_HTTP_LOW_SPEED_TIME' environment variables.
1530 A boolean which disables using of EPSV ftp command by curl.
1531 This can helpful with some "poor" ftp servers which don't
1532 support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV'
1533 environment variable. Default is false (curl will use EPSV).
1536 The HTTP USER_AGENT string presented to an HTTP server. The default
1537 value represents the version of the client Git such as git/1.7.1.
1538 This option allows you to override this value to a more common value
1539 such as Mozilla/4.0. This may be necessary, for instance, if
1540 connecting through a firewall that restricts HTTP connections to a set
1541 of common USER_AGENT strings (but not including those like git/1.7.1).
1542 Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable.
1545 Any of the http.* options above can be applied selectively to some urls.
1546 For a config key to match a URL, each element of the config key is
1547 compared to that of the URL, in the following order:
1550 . Scheme (e.g., `https` in `https://example.com/`). This field
1551 must match exactly between the config key and the URL.
1553 . Host/domain name (e.g., `example.com` in `https://example.com/`).
1554 This field must match exactly between the config key and the URL.
1556 . Port number (e.g., `8080` in `http://example.com:8080/`).
1557 This field must match exactly between the config key and the URL.
1558 Omitted port numbers are automatically converted to the correct
1559 default for the scheme before matching.
1561 . Path (e.g., `repo.git` in `https://example.com/repo.git`). The
1562 path field of the config key must match the path field of the URL
1563 either exactly or as a prefix of slash-delimited path elements. This means
1564 a config key with path `foo/` matches URL path `foo/bar`. A prefix can only
1565 match on a slash (`/`) boundary. Longer matches take precedence (so a config
1566 key with path `foo/bar` is a better match to URL path `foo/bar` than a config
1567 key with just path `foo/`).
1569 . User name (e.g., `user` in `https://user@example.com/repo.git`). If
1570 the config key has a user name it must match the user name in the
1571 URL exactly. If the config key does not have a user name, that
1572 config key will match a URL with any user name (including none),
1573 but at a lower precedence than a config key with a user name.
1576 The list above is ordered by decreasing precedence; a URL that matches
1577 a config key's path is preferred to one that matches its user name. For example,
1578 if the URL is `https://user@example.com/foo/bar` a config key match of
1579 `https://example.com/foo` will be preferred over a config key match of
1580 `https://user@example.com`.
1582 All URLs are normalized before attempting any matching (the password part,
1583 if embedded in the URL, is always ignored for matching purposes) so that
1584 equivalent urls that are simply spelled differently will match properly.
1585 Environment variable settings always override any matches. The urls that are
1586 matched against are those given directly to Git commands. This means any URLs
1587 visited as a result of a redirection do not participate in matching.
1589 i18n.commitEncoding::
1590 Character encoding the commit messages are stored in; Git itself
1591 does not care per se, but this information is necessary e.g. when
1592 importing commits from emails or in the gitk graphical history
1593 browser (and possibly at other places in the future or in other
1594 porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'.
1596 i18n.logOutputEncoding::
1597 Character encoding the commit messages are converted to when
1598 running 'git log' and friends.
1601 The configuration variables in the 'imap' section are described
1602 in linkgit:git-imap-send[1].
1605 Specify the directory from which templates will be copied.
1606 (See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
1609 Specify the program that will be used to browse your working
1610 repository in gitweb. See linkgit:git-instaweb[1].
1613 The HTTP daemon command-line to start gitweb on your working
1614 repository. See linkgit:git-instaweb[1].
1617 If true the web server started by linkgit:git-instaweb[1] will
1618 be bound to the local IP (127.0.0.1).
1620 instaweb.modulepath::
1621 The default module path for linkgit:git-instaweb[1] to use
1622 instead of /usr/lib/apache2/modules. Only used if httpd
1626 The port number to bind the gitweb httpd to. See
1627 linkgit:git-instaweb[1].
1629 interactive.singlekey::
1630 In interactive commands, allow the user to provide one-letter
1631 input with a single key (i.e., without hitting enter).
1632 Currently this is used by the `--patch` mode of
1633 linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
1634 linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
1635 setting is silently ignored if portable keystroke input
1639 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
1640 linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may
1641 override this option with `--no-abbrev-commit`.
1644 Set the default date-time mode for the 'log' command.
1645 Setting a value for log.date is similar to using 'git log''s
1646 `--date` option. Possible values are `relative`, `local`,
1647 `default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1]
1651 Print out the ref names of any commits that are shown by the log
1652 command. If 'short' is specified, the ref name prefixes 'refs/heads/',
1653 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is
1654 specified, the full ref name (including prefix) will be printed.
1655 This is the same as the log commands '--decorate' option.
1658 If true, the initial commit will be shown as a big creation event.
1659 This is equivalent to a diff against an empty tree.
1660 Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
1661 normally hide the root commit will now show it. True by default.
1664 If true, makes linkgit:git-log[1], linkgit:git-show[1], and
1665 linkgit:git-whatchanged[1] assume `--use-mailmap`.
1668 The location of an augmenting mailmap file. The default
1669 mailmap, located in the root of the repository, is loaded
1670 first, then the mailmap file pointed to by this variable.
1671 The location of the mailmap file may be in a repository
1672 subdirectory, or somewhere outside of the repository itself.
1673 See linkgit:git-shortlog[1] and linkgit:git-blame[1].
1676 Like `mailmap.file`, but consider the value as a reference to a
1677 blob in the repository. If both `mailmap.file` and
1678 `mailmap.blob` are given, both are parsed, with entries from
1679 `mailmap.file` taking precedence. In a bare repository, this
1680 defaults to `HEAD:.mailmap`. In a non-bare repository, it
1684 Specify the programs that may be used to display help in the
1685 'man' format. See linkgit:git-help[1].
1688 Specify the command to invoke the specified man viewer. The
1689 specified command is evaluated in shell with the man page
1690 passed as argument. (See linkgit:git-help[1].)
1693 Override the path for the given tool that may be used to
1694 display help in the 'man' format. See linkgit:git-help[1].
1696 include::merge-config.txt[]
1698 mergetool.<tool>.path::
1699 Override the path for the given tool. This is useful in case
1700 your tool is not in the PATH.
1702 mergetool.<tool>.cmd::
1703 Specify the command to invoke the specified merge tool. The
1704 specified command is evaluated in shell with the following
1705 variables available: 'BASE' is the name of a temporary file
1706 containing the common base of the files to be merged, if available;
1707 'LOCAL' is the name of a temporary file containing the contents of
1708 the file on the current branch; 'REMOTE' is the name of a temporary
1709 file containing the contents of the file from the branch being
1710 merged; 'MERGED' contains the name of the file to which the merge
1711 tool should write the results of a successful merge.
1713 mergetool.<tool>.trustExitCode::
1714 For a custom merge command, specify whether the exit code of
1715 the merge command can be used to determine whether the merge was
1716 successful. If this is not set to true then the merge target file
1717 timestamp is checked and the merge assumed to have been successful
1718 if the file has been updated, otherwise the user is prompted to
1719 indicate the success of the merge.
1721 mergetool.keepBackup::
1722 After performing a merge, the original file with conflict markers
1723 can be saved as a file with a `.orig` extension. If this variable
1724 is set to `false` then this file is not preserved. Defaults to
1725 `true` (i.e. keep the backup files).
1727 mergetool.keepTemporaries::
1728 When invoking a custom merge tool, Git uses a set of temporary
1729 files to pass to the tool. If the tool returns an error and this
1730 variable is set to `true`, then these temporary files will be
1731 preserved, otherwise they will be removed after the tool has
1732 exited. Defaults to `false`.
1735 Prompt before each invocation of the merge resolution program.
1738 The (fully qualified) refname from which to show notes when
1739 showing commit messages. The value of this variable can be set
1740 to a glob, in which case notes from all matching refs will be
1741 shown. You may also specify this configuration variable
1742 several times. A warning will be issued for refs that do not
1743 exist, but a glob that does not match any refs is silently
1746 This setting can be overridden with the `GIT_NOTES_DISPLAY_REF`
1747 environment variable, which must be a colon separated list of refs or
1750 The effective value of "core.notesRef" (possibly overridden by
1751 GIT_NOTES_REF) is also implicitly added to the list of refs to be
1754 notes.rewrite.<command>::
1755 When rewriting commits with <command> (currently `amend` or
1756 `rebase`) and this variable is set to `true`, Git
1757 automatically copies your notes from the original to the
1758 rewritten commit. Defaults to `true`, but see
1759 "notes.rewriteRef" below.
1762 When copying notes during a rewrite (see the
1763 "notes.rewrite.<command>" option), determines what to do if
1764 the target commit already has a note. Must be one of
1765 `overwrite`, `concatenate`, or `ignore`. Defaults to
1768 This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`
1769 environment variable.
1772 When copying notes during a rewrite, specifies the (fully
1773 qualified) ref whose notes should be copied. The ref may be a
1774 glob, in which case notes in all matching refs will be copied.
1775 You may also specify this configuration several times.
1777 Does not have a default value; you must configure this variable to
1778 enable note rewriting. Set it to `refs/notes/commits` to enable
1779 rewriting for the default commit notes.
1781 This setting can be overridden with the `GIT_NOTES_REWRITE_REF`
1782 environment variable, which must be a colon separated list of refs or
1786 The size of the window used by linkgit:git-pack-objects[1] when no
1787 window size is given on the command line. Defaults to 10.
1790 The maximum delta depth used by linkgit:git-pack-objects[1] when no
1791 maximum depth is given on the command line. Defaults to 50.
1794 The window memory size limit used by linkgit:git-pack-objects[1]
1795 when no limit is given on the command line. The value can be
1796 suffixed with "k", "m", or "g". Defaults to 0, meaning no
1800 An integer -1..9, indicating the compression level for objects
1801 in a pack file. -1 is the zlib default. 0 means no
1802 compression, and 1..9 are various speed/size tradeoffs, 9 being
1803 slowest. If not set, defaults to core.compression. If that is
1804 not set, defaults to -1, the zlib default, which is "a default
1805 compromise between speed and compression (currently equivalent
1808 Note that changing the compression level will not automatically recompress
1809 all existing objects. You can force recompression by passing the -F option
1810 to linkgit:git-repack[1].
1812 pack.deltaCacheSize::
1813 The maximum memory in bytes used for caching deltas in
1814 linkgit:git-pack-objects[1] before writing them out to a pack.
1815 This cache is used to speed up the writing object phase by not
1816 having to recompute the final delta result once the best match
1817 for all objects is found. Repacking large repositories on machines
1818 which are tight with memory might be badly impacted by this though,
1819 especially if this cache pushes the system into swapping.
1820 A value of 0 means no limit. The smallest size of 1 byte may be
1821 used to virtually disable this cache. Defaults to 256 MiB.
1823 pack.deltaCacheLimit::
1824 The maximum size of a delta, that is cached in
1825 linkgit:git-pack-objects[1]. This cache is used to speed up the
1826 writing object phase by not having to recompute the final delta
1827 result once the best match for all objects is found. Defaults to 1000.
1830 Specifies the number of threads to spawn when searching for best
1831 delta matches. This requires that linkgit:git-pack-objects[1]
1832 be compiled with pthreads otherwise this option is ignored with a
1833 warning. This is meant to reduce packing time on multiprocessor
1834 machines. The required amount of memory for the delta search window
1835 is however multiplied by the number of threads.
1836 Specifying 0 will cause Git to auto-detect the number of CPU's
1837 and set the number of threads accordingly.
1840 Specify the default pack index version. Valid values are 1 for
1841 legacy pack index used by Git versions prior to 1.5.2, and 2 for
1842 the new pack index with capabilities for packs larger than 4 GB
1843 as well as proper protection against the repacking of corrupted
1844 packs. Version 2 is the default. Note that version 2 is enforced
1845 and this config option ignored whenever the corresponding pack is
1848 If you have an old Git that does not understand the version 2 `*.idx` file,
1849 cloning or fetching over a non native protocol (e.g. "http" and "rsync")
1850 that will copy both `*.pack` file and corresponding `*.idx` file from the
1851 other side may give you a repository that cannot be accessed with your
1852 older version of Git. If the `*.pack` file is smaller than 2 GB, however,
1853 you can use linkgit:git-index-pack[1] on the *.pack file to regenerate
1856 pack.packSizeLimit::
1857 The maximum size of a pack. This setting only affects
1858 packing to a file when repacking, i.e. the git:// protocol
1859 is unaffected. It can be overridden by the `--max-pack-size`
1860 option of linkgit:git-repack[1]. The minimum size allowed is
1861 limited to 1 MiB. The default is unlimited.
1862 Common unit suffixes of 'k', 'm', or 'g' are
1866 If the value is boolean, turns on or off pagination of the
1867 output of a particular Git subcommand when writing to a tty.
1868 Otherwise, turns on pagination for the subcommand using the
1869 pager specified by the value of `pager.<cmd>`. If `--paginate`
1870 or `--no-pager` is specified on the command line, it takes
1871 precedence over this option. To disable pagination for all
1872 commands, set `core.pager` or `GIT_PAGER` to `cat`.
1875 Alias for a --pretty= format string, as specified in
1876 linkgit:git-log[1]. Any aliases defined here can be used just
1877 as the built-in pretty formats could. For example,
1878 running `git config pretty.changelog "format:* %H %s"`
1879 would cause the invocation `git log --pretty=changelog`
1880 to be equivalent to running `git log "--pretty=format:* %H %s"`.
1881 Note that an alias with the same name as a built-in format
1882 will be silently ignored.
1885 When true, rebase branches on top of the fetched branch, instead
1886 of merging the default branch from the default remote when "git
1887 pull" is run. See "branch.<name>.rebase" for setting this on a
1890 When preserve, also pass `--preserve-merges` along to 'git rebase'
1891 so that locally committed merge commits will not be flattened
1892 by running 'git pull'.
1894 *NOTE*: this is a possibly dangerous operation; do *not* use
1895 it unless you understand the implications (see linkgit:git-rebase[1]
1899 The default merge strategy to use when pulling multiple branches
1903 The default merge strategy to use when pulling a single branch.
1906 Defines the action `git push` should take if no refspec is
1907 explicitly given. Different values are well-suited for
1908 specific workflows; for instance, in a purely central workflow
1909 (i.e. the fetch source is equal to the push destination),
1910 `upstream` is probably what you want. Possible values are:
1914 * `nothing` - do not push anything (error out) unless a refspec is
1915 explicitly given. This is primarily meant for people who want to
1916 avoid mistakes by always being explicit.
1918 * `current` - push the current branch to update a branch with the same
1919 name on the receiving end. Works in both central and non-central
1922 * `upstream` - push the current branch back to the branch whose
1923 changes are usually integrated into the current branch (which is
1924 called `@{upstream}`). This mode only makes sense if you are
1925 pushing to the same repository you would normally pull from
1926 (i.e. central workflow).
1928 * `simple` - in centralized workflow, work like `upstream` with an
1929 added safety to refuse to push if the upstream branch's name is
1930 different from the local one.
1932 When pushing to a remote that is different from the remote you normally
1933 pull from, work as `current`. This is the safest option and is suited
1936 This mode will become the default in Git 2.0.
1938 * `matching` - push all branches having the same name on both ends.
1939 This makes the repository you are pushing to remember the set of
1940 branches that will be pushed out (e.g. if you always push 'maint'
1941 and 'master' there and no other branches, the repository you push
1942 to will have these two branches, and your local 'maint' and
1943 'master' will be pushed there).
1945 To use this mode effectively, you have to make sure _all_ the
1946 branches you would push out are ready to be pushed out before
1947 running 'git push', as the whole point of this mode is to allow you
1948 to push all of the branches in one go. If you usually finish work
1949 on only one branch and push out the result, while other branches are
1950 unfinished, this mode is not for you. Also this mode is not
1951 suitable for pushing into a shared central repository, as other
1952 people may add new branches there, or update the tip of existing
1953 branches outside your control.
1955 This is currently the default, but Git 2.0 will change the default
1961 Whether to show a diffstat of what changed upstream since the last
1962 rebase. False by default.
1965 If set to true enable '--autosquash' option by default.
1968 When set to true, automatically create a temporary stash
1969 before the operation begins, and apply it after the operation
1970 ends. This means that you can run rebase on a dirty worktree.
1971 However, use with care: the final stash application after a
1972 successful rebase might result in non-trivial conflicts.
1976 By default, git-receive-pack will run "git-gc --auto" after
1977 receiving data from git-push and updating refs. You can stop
1978 it by setting this variable to false.
1980 receive.fsckObjects::
1981 If it is set to true, git-receive-pack will check all received
1982 objects. It will abort in the case of a malformed object or a
1983 broken link. The result of an abort are only dangling objects.
1984 Defaults to false. If not set, the value of `transfer.fsckObjects`
1987 receive.unpackLimit::
1988 If the number of objects received in a push is below this
1989 limit then the objects will be unpacked into loose object
1990 files. However if the number of received objects equals or
1991 exceeds this limit then the received pack will be stored as
1992 a pack, after adding any missing delta bases. Storing the
1993 pack from a push can make the push operation complete faster,
1994 especially on slow filesystems. If not set, the value of
1995 `transfer.unpackLimit` is used instead.
1997 receive.denyDeletes::
1998 If set to true, git-receive-pack will deny a ref update that deletes
1999 the ref. Use this to prevent such a ref deletion via a push.
2001 receive.denyDeleteCurrent::
2002 If set to true, git-receive-pack will deny a ref update that
2003 deletes the currently checked out branch of a non-bare repository.
2005 receive.denyCurrentBranch::
2006 If set to true or "refuse", git-receive-pack will deny a ref update
2007 to the currently checked out branch of a non-bare repository.
2008 Such a push is potentially dangerous because it brings the HEAD
2009 out of sync with the index and working tree. If set to "warn",
2010 print a warning of such a push to stderr, but allow the push to
2011 proceed. If set to false or "ignore", allow such pushes with no
2012 message. Defaults to "refuse".
2014 receive.denyNonFastForwards::
2015 If set to true, git-receive-pack will deny a ref update which is
2016 not a fast-forward. Use this to prevent such an update via a push,
2017 even if that push is forced. This configuration variable is
2018 set when initializing a shared repository.
2021 String(s) `receive-pack` uses to decide which refs to omit
2022 from its initial advertisement. Use more than one
2023 definitions to specify multiple prefix strings. A ref that
2024 are under the hierarchies listed on the value of this
2025 variable is excluded, and is hidden when responding to `git
2026 push`, and an attempt to update or delete a hidden ref by
2027 `git push` is rejected.
2029 receive.updateserverinfo::
2030 If set to true, git-receive-pack will run git-update-server-info
2031 after receiving data from git-push and updating refs.
2033 receive.shallowupdate::
2034 If set to true, .git/shallow can be updated when new refs
2035 require new shallow roots. Otherwise those refs are rejected.
2037 remote.pushdefault::
2038 The remote to push to by default. Overrides
2039 `branch.<name>.remote` for all branches, and is overridden by
2040 `branch.<name>.pushremote` for specific branches.
2043 The URL of a remote repository. See linkgit:git-fetch[1] or
2044 linkgit:git-push[1].
2046 remote.<name>.pushurl::
2047 The push URL of a remote repository. See linkgit:git-push[1].
2049 remote.<name>.proxy::
2050 For remotes that require curl (http, https and ftp), the URL to
2051 the proxy to use for that remote. Set to the empty string to
2052 disable proxying for that remote.
2054 remote.<name>.fetch::
2055 The default set of "refspec" for linkgit:git-fetch[1]. See
2056 linkgit:git-fetch[1].
2058 remote.<name>.push::
2059 The default set of "refspec" for linkgit:git-push[1]. See
2060 linkgit:git-push[1].
2062 remote.<name>.mirror::
2063 If true, pushing to this remote will automatically behave
2064 as if the `--mirror` option was given on the command line.
2066 remote.<name>.skipDefaultUpdate::
2067 If true, this remote will be skipped by default when updating
2068 using linkgit:git-fetch[1] or the `update` subcommand of
2069 linkgit:git-remote[1].
2071 remote.<name>.skipFetchAll::
2072 If true, this remote will be skipped by default when updating
2073 using linkgit:git-fetch[1] or the `update` subcommand of
2074 linkgit:git-remote[1].
2076 remote.<name>.receivepack::
2077 The default program to execute on the remote side when pushing. See
2078 option \--receive-pack of linkgit:git-push[1].
2080 remote.<name>.uploadpack::
2081 The default program to execute on the remote side when fetching. See
2082 option \--upload-pack of linkgit:git-fetch-pack[1].
2084 remote.<name>.tagopt::
2085 Setting this value to \--no-tags disables automatic tag following when
2086 fetching from remote <name>. Setting it to \--tags will fetch every
2087 tag from remote <name>, even if they are not reachable from remote
2088 branch heads. Passing these flags directly to linkgit:git-fetch[1] can
2089 override this setting. See options \--tags and \--no-tags of
2090 linkgit:git-fetch[1].
2093 Setting this to a value <vcs> will cause Git to interact with
2094 the remote with the git-remote-<vcs> helper.
2096 remote.<name>.prune::
2097 When set to true, fetching from this remote by default will also
2098 remove any remote-tracking references that no longer exist on the
2099 remote (as if the `--prune` option was given on the command line).
2100 Overrides `fetch.prune` settings, if any.
2103 The list of remotes which are fetched by "git remote update
2104 <group>". See linkgit:git-remote[1].
2106 repack.usedeltabaseoffset::
2107 By default, linkgit:git-repack[1] creates packs that use
2108 delta-base offset. If you need to share your repository with
2109 Git older than version 1.4.4, either directly or via a dumb
2110 protocol such as http, then you need to set this option to
2111 "false" and repack. Access from old Git versions over the
2112 native protocol are unaffected by this option.
2115 When set to true, `git-rerere` updates the index with the
2116 resulting contents after it cleanly resolves conflicts using
2117 previously recorded resolution. Defaults to false.
2120 Activate recording of resolved conflicts, so that identical
2121 conflict hunks can be resolved automatically, should they be
2122 encountered again. By default, linkgit:git-rerere[1] is
2123 enabled if there is an `rr-cache` directory under the
2124 `$GIT_DIR`, e.g. if "rerere" was previously used in the
2127 sendemail.identity::
2128 A configuration identity. When given, causes values in the
2129 'sendemail.<identity>' subsection to take precedence over
2130 values in the 'sendemail' section. The default identity is
2131 the value of 'sendemail.identity'.
2133 sendemail.smtpencryption::
2134 See linkgit:git-send-email[1] for description. Note that this
2135 setting is not subject to the 'identity' mechanism.
2138 Deprecated alias for 'sendemail.smtpencryption = ssl'.
2140 sendemail.smtpsslcertpath::
2141 Path to ca-certificates (either a directory or a single file).
2142 Set it to an empty string to disable certificate verification.
2144 sendemail.<identity>.*::
2145 Identity-specific versions of the 'sendemail.*' parameters
2146 found below, taking precedence over those when the this
2147 identity is selected, through command-line or
2148 'sendemail.identity'.
2150 sendemail.aliasesfile::
2151 sendemail.aliasfiletype::
2152 sendemail.annotate::
2156 sendemail.chainreplyto::
2158 sendemail.envelopesender::
2160 sendemail.multiedit::
2161 sendemail.signedoffbycc::
2162 sendemail.smtppass::
2163 sendemail.suppresscc::
2164 sendemail.suppressfrom::
2166 sendemail.smtpdomain::
2167 sendemail.smtpserver::
2168 sendemail.smtpserverport::
2169 sendemail.smtpserveroption::
2170 sendemail.smtpuser::
2172 sendemail.validate::
2173 See linkgit:git-send-email[1] for description.
2175 sendemail.signedoffcc::
2176 Deprecated alias for 'sendemail.signedoffbycc'.
2178 showbranch.default::
2179 The default set of branches for linkgit:git-show-branch[1].
2180 See linkgit:git-show-branch[1].
2182 status.relativePaths::
2183 By default, linkgit:git-status[1] shows paths relative to the
2184 current directory. Setting this variable to `false` shows paths
2185 relative to the repository root (this was the default for Git
2189 Set to true to enable --short by default in linkgit:git-status[1].
2190 The option --no-short takes precedence over this variable.
2193 Set to true to enable --branch by default in linkgit:git-status[1].
2194 The option --no-branch takes precedence over this variable.
2196 status.displayCommentPrefix::
2197 If set to true, linkgit:git-status[1] will insert a comment
2198 prefix before each output line (starting with
2199 `core.commentChar`, i.e. `#` by default). This was the
2200 behavior of linkgit:git-status[1] in Git 1.8.4 and previous.
2203 status.showUntrackedFiles::
2204 By default, linkgit:git-status[1] and linkgit:git-commit[1] show
2205 files which are not currently tracked by Git. Directories which
2206 contain only untracked files, are shown with the directory name
2207 only. Showing untracked files means that Git needs to lstat() all
2208 all the files in the whole repository, which might be slow on some
2209 systems. So, this variable controls how the commands displays
2210 the untracked files. Possible values are:
2213 * `no` - Show no untracked files.
2214 * `normal` - Show untracked files and directories.
2215 * `all` - Show also individual files in untracked directories.
2218 If this variable is not specified, it defaults to 'normal'.
2219 This variable can be overridden with the -u|--untracked-files option
2220 of linkgit:git-status[1] and linkgit:git-commit[1].
2222 status.submodulesummary::
2224 If this is set to a non zero number or true (identical to -1 or an
2225 unlimited number), the submodule summary will be enabled and a
2226 summary of commits for modified submodules will be shown (see
2227 --summary-limit option of linkgit:git-submodule[1]). Please note
2228 that the summary output command will be suppressed for all
2229 submodules when `diff.ignoreSubmodules` is set to 'all' or only
2230 for those submodules where `submodule.<name>.ignore=all`. The only
2231 exception to that rule is that status and commit will show staged
2232 submodule changes. To
2233 also view the summary for ignored submodules you can either use
2234 the --ignore-submodules=dirty command line option or the 'git
2235 submodule summary' command, which shows a similar output but does
2236 not honor these settings.
2238 submodule.<name>.path::
2239 submodule.<name>.url::
2240 submodule.<name>.update::
2241 The path within this project, URL, and the updating strategy
2242 for a submodule. These variables are initially populated
2243 by 'git submodule init'; edit them to override the
2244 URL and other values found in the `.gitmodules` file. See
2245 linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
2247 submodule.<name>.branch::
2248 The remote branch name for a submodule, used by `git submodule
2249 update --remote`. Set this option to override the value found in
2250 the `.gitmodules` file. See linkgit:git-submodule[1] and
2251 linkgit:gitmodules[5] for details.
2253 submodule.<name>.fetchRecurseSubmodules::
2254 This option can be used to control recursive fetching of this
2255 submodule. It can be overridden by using the --[no-]recurse-submodules
2256 command line option to "git fetch" and "git pull".
2257 This setting will override that from in the linkgit:gitmodules[5]
2260 submodule.<name>.ignore::
2261 Defines under what circumstances "git status" and the diff family show
2262 a submodule as modified. When set to "all", it will never be considered
2263 modified (but it will nonetheless show up in the output of status and
2264 commit when it has been staged), "dirty" will ignore all changes
2265 to the submodules work tree and
2266 takes only differences between the HEAD of the submodule and the commit
2267 recorded in the superproject into account. "untracked" will additionally
2268 let submodules with modified tracked files in their work tree show up.
2269 Using "none" (the default when this option is not set) also shows
2270 submodules that have untracked files in their work tree as changed.
2271 This setting overrides any setting made in .gitmodules for this submodule,
2272 both settings can be overridden on the command line by using the
2273 "--ignore-submodules" option. The 'git submodule' commands are not
2274 affected by this setting.
2277 This variable can be used to restrict the permission bits of
2278 tar archive entries. The default is 0002, which turns off the
2279 world write bit. The special value "user" indicates that the
2280 archiving user's umask will be used instead. See umask(2) and
2281 linkgit:git-archive[1].
2283 transfer.fsckObjects::
2284 When `fetch.fsckObjects` or `receive.fsckObjects` are
2285 not set, the value of this variable is used instead.
2289 This variable can be used to set both `receive.hiderefs`
2290 and `uploadpack.hiderefs` at the same time to the same
2291 values. See entries for these other variables.
2293 transfer.unpackLimit::
2294 When `fetch.unpackLimit` or `receive.unpackLimit` are
2295 not set, the value of this variable is used instead.
2296 The default value is 100.
2298 uploadpack.hiderefs::
2299 String(s) `upload-pack` uses to decide which refs to omit
2300 from its initial advertisement. Use more than one
2301 definitions to specify multiple prefix strings. A ref that
2302 are under the hierarchies listed on the value of this
2303 variable is excluded, and is hidden from `git ls-remote`,
2304 `git fetch`, etc. An attempt to fetch a hidden ref by `git
2305 fetch` will fail. See also `uploadpack.allowtipsha1inwant`.
2307 uploadpack.allowtipsha1inwant::
2308 When `uploadpack.hiderefs` is in effect, allow `upload-pack`
2309 to accept a fetch request that asks for an object at the tip
2310 of a hidden ref (by default, such a request is rejected).
2311 see also `uploadpack.hiderefs`.
2313 uploadpack.keepalive::
2314 When `upload-pack` has started `pack-objects`, there may be a
2315 quiet period while `pack-objects` prepares the pack. Normally
2316 it would output progress information, but if `--quiet` was used
2317 for the fetch, `pack-objects` will output nothing at all until
2318 the pack data begins. Some clients and networks may consider
2319 the server to be hung and give up. Setting this option instructs
2320 `upload-pack` to send an empty keepalive packet every
2321 `uploadpack.keepalive` seconds. Setting this option to 0
2322 disables keepalive packets entirely. The default is 5 seconds.
2324 url.<base>.insteadOf::
2325 Any URL that starts with this value will be rewritten to
2326 start, instead, with <base>. In cases where some site serves a
2327 large number of repositories, and serves them with multiple
2328 access methods, and some users need to use different access
2329 methods, this feature allows people to specify any of the
2330 equivalent URLs and have Git automatically rewrite the URL to
2331 the best alternative for the particular user, even for a
2332 never-before-seen repository on the site. When more than one
2333 insteadOf strings match a given URL, the longest match is used.
2335 url.<base>.pushInsteadOf::
2336 Any URL that starts with this value will not be pushed to;
2337 instead, it will be rewritten to start with <base>, and the
2338 resulting URL will be pushed to. In cases where some site serves
2339 a large number of repositories, and serves them with multiple
2340 access methods, some of which do not allow push, this feature
2341 allows people to specify a pull-only URL and have Git
2342 automatically use an appropriate URL to push, even for a
2343 never-before-seen repository on the site. When more than one
2344 pushInsteadOf strings match a given URL, the longest match is
2345 used. If a remote has an explicit pushurl, Git will ignore this
2346 setting for that remote.
2349 Your email address to be recorded in any newly created commits.
2350 Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and
2351 'EMAIL' environment variables. See linkgit:git-commit-tree[1].
2354 Your full name to be recorded in any newly created commits.
2355 Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME'
2356 environment variables. See linkgit:git-commit-tree[1].
2359 If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the
2360 key you want it to automatically when creating a signed tag or
2361 commit, you can override the default selection with this variable.
2362 This option is passed unchanged to gpg's --local-user parameter,
2363 so you may specify a key using any method that gpg supports.
2366 Specify a web browser that may be used by some commands.
2367 Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]