apache.conf.in

   1 ##  To convert this file to apache.conf using the current Girocco::Config
   2 ##  values either do "make" or "make apache.conf" or ./make-apache-conf.sh
   3 ##
   4 # This is an example configuration of a virtualhost running Girocco, as set up
   5 # at repo.or.cz; unfortunately, somewhat independent from Girocco::Config.
   6 # It is not essential for Girocco to use a special virtualhost, however.
   7 <VirtualHost *:80>
   8
   9 # ---- BEGIN LINES TO DUPLICATE ----
  10
  11         ServerName @@httpdnsname@@
  12         ServerAlias www.@@httpdnsname@@
  13         ServerAdmin @@admin@@
  14
  15         # This is the standard "combined" log format modified as follows:
  16         #    the received time is shown as [YYYY-mm-dd_HH:MM:SS +hhmm] (almost RFC 3339 format)
  17         #        -- this is one character shorter than the default but sorts so much better
  18         #    when the logio_module is present (almost always) the %O value is prefixed with:
  19         #        %I->  -- <bytes-received-including-request-and-headers>
  20         #    the first line of the request ("%r") is prefixed with
  21         #        %X%k: -- <connection-status><keepalive-request-num>
  22         #                 <keepalive-request-num> will be omitted if apache < 2.2.11
  23         #    these fields are added to the end:
  24         #        :%{local}p   -- :<actual-server-port>
  25         #        %Dus         -- <request-time-in-microseconds>
  26         #        "%o{Content-Range}" -- <outgoing Content-Range header>
  27         <IfVersion >= 2.2.11>
  28         LogFormat "%h %l %u %{[%F_%T %z]}t %X%k:\"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" :%{local}p %Dus \"%{Content-Range}o\"" girocco
  29         </IfVersion>
  30         <IfVersion !>= 2.2.11>
  31         LogFormat "%h %l %u %{[%F_%T %z]}t %X:\"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" :%{local}p %Dus \"%{Content-Range}o\"" girocco
  32         </IfVersion>
  33         <IfModule logio_module>
  34                 # %I and %O are only available with the logio_module
  35                 <IfVersion >= 2.2.11>
  36                 LogFormat "%h %l %u %{[%F_%T %z]}t %X%k:\"%r\" %>s %I->%O \"%{Referer}i\" \"%{User-Agent}i\" :%{local}p %Dus \"%{Content-Range}o\"" girocco
  37                 </IfVersion>
  38                 <IfVersion !>= 2.2.11>
  39                 LogFormat "%h %l %u %{[%F_%T %z]}t %X:\"%r\" %>s %I->%O \"%{Referer}i\" \"%{User-Agent}i\" :%{local}p %Dus \"%{Content-Range}o\"" girocco
  40                 </IfVersion>
  41         </IfModule>
  42
  43         # If your distribution does not set APACHE_LOG_DIR before
  44         # starting Apache you will need to edit the next two directives
  45         ErrorLog "${APACHE_LOG_DIR}/@@nickname@@-error.log"
  46         CustomLog "${APACHE_LOG_DIR}/@@nickname@@-access.log" girocco
  47
  48         <IfModule mime_magic_module>
  49                 # Avoid spurious Content-Type values when git-http-backend
  50                 # fails to provide a Content-Type header in its output
  51                 MimeMagicFile /dev/null
  52         </IfModule>
  53
  54         DocumentRoot @@webroot@@
  55         <Directory @@webroot@@>
  56                 # Add MultiViews only if pages are truly
  57                 # offered in more than a single language
  58                 # FollowSymLinks or SymLinksIfOwnerMatch is required for .htaccess files
  59                 Options FollowSymLinks
  60                 # FileInfo (or All) must be enabled to activate .htaccess file mod_rewrite rules
  61                 AllowOverride All
  62                 <IfVersion < 2.3>
  63                 Order allow,deny
  64                 Allow from all
  65                 Satisfy all
  66                 </IfVersion>
  67                 <IfVersion >= 2.3>
  68                 Require all granted
  69                 </IfVersion>
  70                 DirectoryIndex w
  71         </Directory>
  72
  73         # The non-mod_rewrite items are handled first where the magic /[bchrw]
  74         # prefix always forces selection of the prefix-indicated cgi handler.
  75
  76         ScriptAlias /w @@cgiroot@@/gitweb.cgi
  77         ScriptAlias /b @@cgiroot@@/bundles.cgi
  78         ScriptAlias /h @@cgiroot@@/html.cgi
  79         ScriptAliasMatch ^/(?!(?i)gitweb\.cgi|bundles\.cgi|html\.cgi(?:/|$))([^/]+\.cgi(?:/.*)?)$ @@cgiroot@@/$1
  80
  81         # Any requests without the magic /[bchrw] are treated as Git requests if they
  82         # are one of the few possible Git URLs otherwise they go to bundles or gitweb
  83
  84         # Change the setting of $SmartHTTPOnly in Girocco::Config.pm to
  85         # change whether or not non-smart HTTP fetch access will be allowed.
  86
  87         <IfDefine !@@SmartHTTPOnly@@>
  88         # This accelerates non-smart HTTP access to loose objects, packs and info
  89         AliasMatch \
  90                 "(?x)^/(?![bchw]/)(?:r/)? \
  91                 ((?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?)(?:\.git)?/( \
  92                         HEAD | \
  93                         objects/info/alternates | \
  94                         objects/info/http-alternates | \
  95                         objects/info/packs | \
  96                         objects/[0-9a-f]{2}/[0-9a-f]{38} | \
  97                         objects/pack/pack-[0-9a-f]{40}\.(?:pack|idx) )$" \
  98                 @@reporoot@@/$1.git/$2
  99         </IfDefine>
 100
 101         # SetEnv GIT_HTTP_BACKEND_BIN to override Config.pm $git_http_backend_bin
 102         ScriptAlias /r/ @@basedir@@/bin/git-http-backend-verify/
 103
 104         ScriptAliasMatch \
 105                 "(?x)^/(?![bchrw]/) \
 106                 ((?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?)(?:\.git)?/( \
 107                         info/refs | \
 108                         git-upload-pack | \
 109                         git-receive-pack | \
 110                         [a-zA-Z0-9][a-zA-Z0-9+._-]*\.bundle )$" \
 111                 @@basedir@@/bin/git-http-backend-verify/$1.git/$2
 112
 113         # Everything else off to bundles.cgi or gitweb.cgi
 114         ScriptAliasMatch \
 115                 "(?x)^/(?![bchrw]/) \
 116                 ((?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?\.git/bundles)$" \
 117                 @@cgiroot@@/bundles.cgi/$1
 118         ScriptAliasMatch \
 119                 "(?x)^/(?![bchrw]/) \
 120                 ((?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?\.git(?!/bundles)(?:/.*)?)$" \
 121                 @@cgiroot@@/gitweb.cgi/$1
 122
 123         # mod_rewrite is not strictly required for gitweb and fetch access, but
 124         # if it's not available the trailing ".git" is never optional for
 125         # gitweb, the leading /h is always required for *.html, snapshots are
 126         # not throttled, some bogus Git http protocol requests will not be
 127         # detected early and, if non-smart HTTP is allowed, access to the
 128         # /info/refs file will not be accelerated in non-smart HTTP mode.
 129
 130         <IfModule rewrite_module>
 131                 RewriteEngine On
 132
 133                 # Snapshot requests are only allowed via the PATH_INFO mechanism
 134                 RewriteCond %{QUERY_STRING}     (^|[&;])a=snapshot([&;]|$) [NC]
 135                 RewriteRule .? - [NS,F,L]
 136
 137                 # Redirect snapshot requests to snapshot.cgi
 138                 RewriteRule \
 139                         "(?x)^/(?![bchr]/)(?:w/)? \
 140                         ((?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?\.git/ \
 141                                 snapshot(?:/.*)?)$" \
 142                         @@cgiroot@@/snapshot.cgi/$1 [NS,L,H=cgi-script]
 143
 144                 # Make the leading /h optional for requests that name an existing .html template
 145                 RewriteCond @@webroot@@/$1 !-f
 146                 RewriteCond @@cgiroot@@/$1 !-f
 147                 RewriteCond @@basedir@@/html/$1 -s
 148                 RewriteRule \
 149                         ^/(?![bchrw]/)(.*\.html)$ \
 150                         /h/$1 [NS,PT]
 151
 152                 # Redirect bare gitweb requests without .git that name an existing repo...
 153                 RewriteCond @@webroot@@/$2 !-f
 154                 RewriteCond @@cgiroot@@/$2 !-f
 155                 RewriteCond @@reporoot@@/$2.git/HEAD -s
 156                 RewriteRule \
 157                         "(?x)^/(?![bchr]/)((?:w/)?) \
 158                         ((?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git))$" \
 159                         /$1$2.git [NS,L,R=301]
 160
 161                 # Of the 11 possible Git protocol URLs (i.e. passed to git-http-backend-verify),
 162                 # 9 are only valid with GET/HEAD and the other two are only valid with POST
 163                 # Furthermore, 7 are only valid when non-smart is allowed and
 164                 # 1 is only valid when smart-only is enabled if it has the correct query string.
 165
 166                 # These two always require POST
 167                 RewriteCond %{REQUEST_METHOD} !=POST
 168                 RewriteRule \
 169                         "(?x)^/(?![bchw]/)(?:r/)? \
 170                         (?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?(?:\.git)?/(?: \
 171                                 git-upload-pack | \
 172                                 git-receive-pack )$" \
 173                         - [NS,F]
 174
 175                 <IfDefine @@SmartHTTPOnly@@>
 176                 # These 7 are always forbidden when non-smart HTTP is disabled
 177                 RewriteRule \
 178                         "(?x)^/(?![bchw]/)(?:r/)? \
 179                         (?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?(?:\.git)?/(?: \
 180                                 HEAD | \
 181                                 objects/info/alternates | \
 182                                 objects/info/http-alternates | \
 183                                 objects/info/packs | \
 184                                 objects/[0-9a-f]{2}/[0-9a-f]{38} | \
 185                                 objects/pack/pack-[0-9a-f]{40}\.(?:pack|idx) )$" \
 186                         - [NS,F]
 187                 # This one is forbidden without the magic query string when non-smart is disabled
 188                 RewriteCond %{REQUEST_METHOD} !^(?:GET|HEAD)$ [OR]
 189                 RewriteCond %{QUERY_STRING} !(^|&)service=git-(?:upload|receive)-pack(&|$)
 190                 RewriteRule \
 191                         "(?x)^/(?![bchw]/)(?:r/)? \
 192                         (?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?(?:\.git)?/ \
 193                                 info/refs $" \
 194                         - [NS,F]
 195                 # This one requires GET (or HEAD)
 196                 RewriteCond %{REQUEST_METHOD} !^(?:GET|HEAD)$
 197                 RewriteRule \
 198                         "(?x)^/(?![bchw]/)(?:r/)? \
 199                         (?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?(?:\.git)?/ \
 200                                 [a-zA-Z0-9][a-zA-Z0-9+._-]*\.bundle $" \
 201                         - [NS,F]
 202                 </IfDefine>
 203
 204                 <IfDefine !@@SmartHTTPOnly@@>
 205                 # These 9 require GET (or HEAD)
 206                 RewriteCond %{REQUEST_METHOD} !^(?:GET|HEAD)$
 207                 RewriteRule \
 208                         "(?x)^/(?![bchw]/)(?:r/)? \
 209                         (?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?(?:\.git)?/(?: \
 210                                 HEAD | \
 211                                 info/refs | \
 212                                 objects/info/alternates | \
 213                                 objects/info/http-alternates | \
 214                                 objects/info/packs | \
 215                                 objects/[0-9a-f]{2}/[0-9a-f]{38} | \
 216                                 objects/pack/pack-[0-9a-f]{40}\.(?:pack|idx) | \
 217                                 [a-zA-Z0-9][a-zA-Z0-9+._-]*\.bundle )$" \
 218                         - [NS,F]
 219                 # This one can be accelerated when accessed with non-smart HTTP
 220                 RewriteCond %{REQUEST_METHOD} ^(?:GET|HEAD)$
 221                 RewriteCond %{QUERY_STRING} !(^|&)service=git-(?:upload|receive)-pack(&|$)
 222                 RewriteRule \
 223                         "(?x)^/(?![bchw]/)(?:r/)? \
 224                         ((?:[a-zA-Z0-9][a-zA-Z0-9+._-]*(?<!\.git)/)*[a-zA-Z0-9][a-zA-Z0-9+._-]*?)(?:\.git)?/ \
 225                                 info/refs $" \
 226                         @@reporoot@@/$1.git/info/refs [NS,L]
 227                 </IfDefine>
 228         </IfModule>
 229
 230         <Directory @@reporoot@@>
 231                 Options FollowSymLinks
 232                 AllowOverride None
 233                 <IfVersion < 2.3>
 234                 Order allow,deny
 235                 Allow from all
 236                 Satisfy all
 237                 </IfVersion>
 238                 <IfVersion >= 2.3>
 239                 Require all granted
 240                 </IfVersion>
 241
 242                 <IfModule rewrite_module>
 243                         # Everything fetched over the non-smart git http
 244                         # protocol should be an existing file.  If the request
 245                         # is not for an existing file, just send back an error
 246                         # message without emitting anything into the error log.
 247                         RewriteEngine On
 248                         RewriteBase /
 249                         RewriteCond @@reporoot@@/$1 !-f
 250                         RewriteRule ^(.*)$ - [NS,R=404,L]
 251                 </IfModule>
 252         </Directory>
 253
 254         <Directory @@cgiroot@@>
 255                 # FollowSymLinks or SymLinksIfOwnerMatch is required for .htaccess files
 256                 Options SymLinksIfOwnerMatch
 257                 # FileInfo must be enabled to activate .htaccess file mod_rewrite rules
 258                 AllowOverride FileInfo
 259                 <IfVersion < 2.3>
 260                 Order deny,allow
 261                 Deny from all
 262                 Satisfy all
 263                 </IfVersion>
 264                 <IfVersion >= 2.3>
 265                 Require all denied
 266                 </IfVersion>
 267                 <Files gitweb.cgi>
 268                         Options +ExecCGI
 269                         <IfVersion < 2.3>
 270                         Order deny,allow
 271                         Allow from all
 272                         Satisfy all
 273                         </IfVersion>
 274                         <IfVersion >= 2.3>
 275                         Require all granted
 276                         </IfVersion>
 277                         <IfModule !mod_fastcgi.c>
 278                         <IfModule !mod_fcgid.c>
 279                                 SetHandler cgi-script
 280                         </IfModule>
 281                         </IfModule>
 282
 283                         # Note that in testing mod_fastcgi (in dynamic mode)
 284                         # was found to be slightly faster than mod_fcgid.
 285                         #
 286                         # However, we prefer mod_fcgid if both are available
 287                         # because we cannot control the server-global settings
 288                         # of mod_fastcgi's "FastCgiConfig" options.
 289                         #
 290                         # In order for gitweb.cgi to run reasonably well as a
 291                         # mod_fastcgi dynamic FastCGI application, the
 292                         # "FastCgiConfig" option "-idle-timeout" value needs to
 293                         # be increased from the default value of "30" to at
 294                         # least "120", preferably more like "300".  But that
 295                         # will affect ALL dynamic mod_fastcgi applications on
 296                         # the ENTIRE server, not just gitweb.cgi.  Additionally
 297                         # the "FastCgiConfig" "-restart" option probably ought
 298                         # to be set as well.  Also, unfortunately, there is no
 299                         # mod_fastcgi option corresponding to mod_fcgid's
 300                         # MaxRequestsPerProcess option and gitweb.cgi running
 301                         # in FastCGI mode (without using FCGI::ProcManager) will
 302                         # always exit after serving 100 requests (a good thing).
 303                         #
 304                         # The alternative is to make gitweb.cgi a static
 305                         # mod_fastcgi application (the "FastCgiServer"
 306                         # directive), but then the number of running instances
 307                         # will be fixed at whatever value is chosen for the
 308                         # "-processes" option rather than being dynamically
 309                         # adjusted based on load and that's probably undesirable
 310                         # in most cases unless you run gitweb.cgi under a
 311                         # front-end that dynamically forks multiple copies of
 312                         # gitweb.cgi based on the current load.  See the CPAN
 313                         # FCGI::ProcManager::Dynamic module for an example of
 314                         # how to do this in Perl:
 315                         #
 316                         #   http://search.cpan.org/search?query=FCGI::ProcManager::Dynamic&mode=module
 317                         #
 318                         # So instead we prefer mod_fcgid because we can adjust
 319                         # the necessary options for good gitweb.cgi behavior
 320                         # while affecting only gitweb.cgi and having it remain
 321                         # a dynamic application whose total number of running
 322                         # instances is adjusted based on current server load.
 323
 324                         <IfModule mod_fcgid.c>
 325                                 SetHandler fcgid-script
 326                         </IfModule>
 327                         <IfModule !mod_fcgid.c>
 328                         <IfModule mod_fastcgi.c>
 329                                 SetHandler fastcgi-script
 330                         </IfModule>
 331                         </IfModule>
 332                 </Files>
 333                 <FilesMatch ^(?!(?i)gitweb\.cgi$).*\.cgi$>
 334                         Options +ExecCGI
 335                         SetHandler cgi-script
 336                         <IfVersion < 2.3>
 337                         Order deny,allow
 338                         Allow from all
 339                         Satisfy all
 340                         </IfVersion>
 341                         <IfVersion >= 2.3>
 342                         Require all granted
 343                         </IfVersion>
 344                 </FilesMatch>
 345         </Directory>
 346
 347         <IfModule mod_fcgid.c>
 348                 # mod_fcgid benefits from some additional config for gitweb.cgi
 349                 # gitweb.cgi has a hard-coded maximum of 100 requests
 350                 # and we do not want to give up too soon in case Git is lagging.
 351                 # Note that adding a 'MaxProcesses ...' option here may be valuable
 352                 # to limit the maximum number of gitweb.cgi processes that can be
 353                 # spawned (default is 100) -- perhaps to something much lower such
 354                 # as 1 or 2 times the number of CPU cores.  Also note that in the
 355                 # unlikely event all the children finish their 100 requests at the
 356                 # same time, the server's FcgidSpawnScoreUpLimit (which defaults
 357                 # to 10 if not set) should be set to at least 3 times the
 358                 # MaxProcesses value chosen to allow them all to respawn
 359                 # immediately.  FcgidSpawnScoreUpLimit MUST be at least twice the
 360                 # chosen MaxProcesses value (assuming FcgidTerminationScore is
 361                 # still set to the default 2) in order to allow any child at all to
 362                 # respawn immediately in this case without a delay.
 363                 FcgidCmdOptions @@cgiroot@@/gitweb.cgi \
 364                 MaxRequestsPerProcess 100 IOTimeout 300
 365         </IfModule>
 366
 367         <Directory @@basedir@@/bin>
 368                 Options None
 369                 AllowOverride None
 370                 <IfVersion < 2.3>
 371                 Order deny,allow
 372                 Deny from all
 373                 Satisfy all
 374                 </IfVersion>
 375                 <IfVersion >= 2.3>
 376                 Require all denied
 377                 </IfVersion>
 378                 <Files git-http-backend-verify>
 379                         Options ExecCGI
 380                         SetHandler cgi-script
 381                         <IfVersion < 2.3>
 382                         Order deny,allow
 383                         Allow from all
 384                         Satisfy all
 385                         </IfVersion>
 386                         <IfVersion >= 2.3>
 387                         Require all granted
 388                         </IfVersion>
 389                 </Files>
 390         </Directory>
 391
 392 # ---- END LINES TO DUPLICATE ----
 393
 394 </VirtualHost>
 395
 396
 397 # Change the setting of $TLSHost in Girocco::Config.pm to change
 398 # whether or not the following https virtual host is enabled.
 399
 400 <IfDefine @@TLSHost@@>
 401
 402 # This is an example configuration of an https virtualhost running Girocco, as set
 403 # up at repo.or.cz; unfortunately, completely independent from Girocco::Config.
 404 # It is not essential for Girocco to use a special virtualhost, however.
 405 # The Config.pm $httpspushurl variable needs to be defined to properly enable
 406 # https pushing.
 407 <VirtualHost *:443>
 408
 409         # These certificate files will all be automatically generated, but the
 410         # paths here may need to be corrected to match the paths
 411         # (especially $certsdir) from Config.pm
 412
 413         SSLCertificateFile @@certsdir@@/girocco_www_crt.pem
 414         SSLCertificateKeyFile @@certsdir@@/girocco_www_key.pem
 415         SSLCertificateChainFile @@certsdir@@/girocco_www_chain.pem
 416         # when using a paid www server cert, only the above three lines should
 417         # be changed.  Changing any of the below two lines (other than updating
 418         # the paths to match $certsdir) will likely break https client auth
 419         SSLCACertificateFile @@certsdir@@/girocco_root_crt.pem
 420         SSLCADNRequestFile @@certsdir@@/girocco_client_crt.pem
 421
 422         SSLVerifyDepth 3
 423         SSLOptions +FakeBasicAuth +StrictRequire
 424         SSLEngine on
 425
 426         # This configuration allows fetching over https without a certificate
 427         # while always requiring a certificate for pushing over https
 428         RewriteEngine On
 429         SSLVerifyClient optional
 430         RewriteCond %{REQUEST_METHOD} ^(GET|HEAD)$ [NC]
 431         RewriteCond %{QUERY_STRING} (^|&)service=git-receive-pack(&|$) [NC]
 432         RewriteRule /info/refs$ - [NC,NS,env=client_auth_required:1]
 433         RewriteCond %{REQUEST_METHOD} =POST [NC]
 434         RewriteRule /git-receive-pack$ - [NC,NS,env=client_auth_required:1]
 435         RewriteCond %{ENV:client_auth_required} 1
 436         RewriteCond %{SSL:SSL_CLIENT_VERIFY} !^SUCCESS$
 437         RewriteRule .? %{REQUEST_URI} [NS,R=401]
 438         <Location />
 439                 SSLRequireSSL
 440                 SSLOptions +FakeBasicAuth
 441                 AuthName "Git Client Authentication"
 442                 AuthType Basic
 443                 AuthBasicProvider anon
 444                 Anonymous *
 445                 <IfVersion < 2.3>
 446                 Order deny,allow
 447                 Deny from env=client_auth_required
 448                 Satisfy any
 449                 Require valid-user
 450                 </IfVersion>
 451                 <IfVersion >= 2.3>
 452                 <RequireAny>
 453                 <RequireAll>
 454                 Require all granted
 455                 Require not env client_auth_required
 456                 </RequireAll>
 457                 Require valid-user
 458                 </RequireAny>
 459                 </IfVersion>
 460         </Location>
 461         ErrorDocument 401 /authrequired.cgi
 462
 463 # ---- BEGIN DUPLICATE LINES ----
 464 ##
 465 ##  *** IMPORTANT ***
 466 ##
 467 ##  ALL the entire contents from the <VirtualHost *:80> section at the top of
 468 ##  this file must be copied here.
 469 ##
 470 ##  To avoid this duplication, the contents of the <VirtualHost *:80> section
 471 ##  above can be moved to a separate file and then included both here and in
 472 ##  the <VirtualHost *:80> section using an Include directive.  Be careful not
 473 ##  to place the new include file in one of the directories the standard apache
 474 ##  configuration blindly includes all files from.
 475 ##
 476 # ---- END DUPLICATE LINES ----
 477
 478 </VirtualHost>
 479
 480 </IfDefine>