hid/gtk (GL): I think the polygon renderer works in mask mode now
[geda-pcb/pcjc2.git] / configure.ac
blobf557c3756ba53decf3a58c4e528e9f7f6e4549fa
1 dnl Process this file with autoconf to produce a configure script.
3 AC_INIT([pcb], [1.99z])
4 AC_CONFIG_SRCDIR([src/draw.c])
5 AC_PREREQ([2.60])
6 AM_INIT_AUTOMAKE([1.9])
7 AC_GNU_SOURCE
8 AC_CONFIG_HEADERS([config.h])
10 m4_include(configure.ac.system) dnl checks for system functions, headers, libs
12 ##########################################################################
14 # Try to figure out if we are building from git sources.
15 # If we are then unless building of the documentation has
16 # been disabled then just require the user have all the right
17 # tools.  Users building from a tarball won't need latex, makeinfo,
18 # etc. but if you're already downloading development sources, then
19 # it is not unreasonable to require development tools.  What motivated
20 # this is that using maintainer mode proved to cause regular confusion.
22 pcb_sources="tarball"
23 AC_MSG_CHECKING([if you are building from a git checkout])
24 pcb_git_version=no
25 if test -f $srcdir/.gitignore ; then
26         pcb_git_version=yes
27         AC_MSG_RESULT([yes])
28         pcb_sources="GIT"
29 else
30         AC_MSG_RESULT([no])
32 AM_CONDITIONAL(GIT_VERSION, test x$pcb_git_version = xyes)
34 AC_MSG_CHECKING([if you are building from a anoncvs checkout])
35 pcb_cvs_version=no
36 if test -f $srcdir/CVS/Root ; then
37         pcb_cvs_version=yes
38         AC_MSG_RESULT([yes])
39         pcb_sources="CVS"
40 else
41         AC_MSG_RESULT([no])
43 AM_CONDITIONAL(CVS_VERSION, test x$pcb_cvs_version = xyes)
44 AM_CONDITIONAL(GIT_OR_CVS_VERSION, test x$pcb_git_version = xyes -o x$pcb_cvs_version = xyes)
47 ##########################################################################
49 # See if we are supposed to build the docs
52 docs_yesno=yes
53 AC_MSG_CHECKING([if the documentation should be built])
54 AC_ARG_ENABLE([doc],
55 [  --enable-doc            Build and install the documentation [[default=yes]]],
57 if test "X$enable_doc" = "Xno" ; then
58         DOC=""
59         AC_MSG_RESULT([no])
60         docs_yesno=no
61 else
62         DOC=doc
63         AC_MSG_RESULT([yes])
64         docs_yesno=yes
68 DOC=doc
69 AC_MSG_RESULT([yes])
70 docs_yesno=yes
72 AC_SUBST(DOC)
75 AC_MSG_CHECKING([if maintainer mode is required])
76 if test "$docs_yesno" = "yes" -a "$pcb_git_version" = "yes" ; then
77         AC_MSG_RESULT([yes -- the documentation build is enabled and your sources are from git])
78         enable_maintainer_mode=yes
79 else
80         AC_MSG_RESULT([no])
84 dnl determine host type
85 AC_CANONICAL_HOST
86 AC_MSG_CHECKING(for windows)
87 PCB_PATH_DELIMETER=":"
88 PCB_DIR_SEPARATOR_S="/"
89 PCB_DIR_SEPARATOR_C='/'
90 case $host in
91         *-*-mingw* )
92                 WIN32=yes
93                 CFLAGS="$CFLAGS ${MINGW_CFLAGS:--mms-bitfields -mwindows}"
94                 CPPFLAGS="$CPPFLAGS ${MINGW_CPPFLAGS}"
95                 ;;
97         * )
98                 WIN32=no
99                 ;;
100 esac
102 AC_MSG_RESULT($WIN32)
103 AC_SUBST(WIN32)
104 AM_CONDITIONAL(WIN32, test x$WIN32 = xyes)
105 if test "x$WIN32" = "xyes" ; then
106         PCB_PATH_DELIMETER=";"
107         PCB_DIR_SEPARATOR_S="\\\\"
108         PCB_DIR_SEPARATOR_C='\\'
111 AC_DEFINE_UNQUOTED(PCB_DIR_SEPARATOR_C,'$PCB_DIR_SEPARATOR_C',[Directory separator char])
112 AC_DEFINE_UNQUOTED(PCB_DIR_SEPARATOR_S,"$PCB_DIR_SEPARATOR_S",[Directory separator string])
113 AC_DEFINE_UNQUOTED(PCB_PATH_DELIMETER,"$PCB_PATH_DELIMETER",[Search path separator string])
116 dnl Checks for programs.
117 AC_PROG_CC
118 AC_PROG_CXX
120 if test "x$WIN32" = "xyes" ; then
121         AC_CHECK_TOOL(WINDRES, windres, [no])
122         if test "$WINDRES" = "no" ; then
123                 AC_MSG_ERROR([*** Could not find an implementation of windres in your PATH.])
124         fi
127 # i18n
128 GETTEXT_PACKAGE=$PACKAGE
129 AH_TEMPLATE([GETTEXT_PACKAGE], [Name of this program's gettext domain])
130 AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE], ["$GETTEXT_PACKAGE"])
131 AC_SUBST(GETTEXT_PACKAGE)
133 AM_GNU_GETTEXT_VERSION([0.14])
134 AM_GNU_GETTEXT
135 IT_PROG_INTLTOOL([0.35.0])
137 AC_C_INLINE
138 AC_PROG_CC_STDC
139 AM_PROG_CC_C_O
140 AC_PROG_CPP
141 AC_PROG_AWK
142 AC_PROG_MKDIR_P
144 AM_PROG_LEX
145 AC_PATH_PROG(LEX_PATH, $LEX, [notfound])
146 if test "$LEX_PATH" = "notfound" ; then
147         AC_MSG_ERROR([Couldn't find a usable lex program.
148 Please install flex which is available from
149 ftp://ftp.gnu.org/pub/non-gnu/flex/
154 AC_PROG_YACC
155 AC_PATH_PROG(YACC_PATH, $YACC, [notfound])
156 if test "$YACC_PATH" = "notfound" ; then
157         AC_MSG_ERROR([Couldn't find a usable yacc program.
158 Please install bison which is available from
159 ftp://ftp.gnu.org/pub/gnu/bison/
163 AC_PROG_INSTALL
164 AC_PROG_RANLIB
167 # Used for building the icons
169 AC_PATH_PROG(XPMTOPPM, xpmtoppm, notfound)
170 AC_PATH_PROG(PPMTOWINICON, ppmtowinicon, notfound)
171 AC_PATH_PROG(CONVERT, convert, notfound)
173 ##########################################################################
176 if test "X$docs_yesno" = "Xyes" -a "X$pcb_git_version" = "Xyes" ; then
177    AC_PATH_PROG(MKINFO, makeinfo, no)
178    if test "X$MKINFO" != "Xno"; then
179       AC_MSG_CHECKING([for GNU makeinfo version >= 4.6])
180       v=`$MKINFO --version | grep "GNU texinfo"`
181       if test $? -ne 0; then
182          AC_MSG_RESULT([non-GNU])
183          MKINFO="no"
184       fi
185    fi
186    if test "X$MKINFO" != "Xno"; then
187       vmajor=`echo "$v" | sed 's/.* \([[0-9]]*\)\.\([[0-9]]*\)$/\1/'`
188       vminor=`echo "$v" | sed 's/.* \([[0-9]]*\)\.\([[0-9]]*\)$/\2/'`
189       AC_MSG_RESULT([$vmajor.$vminor])
190       if test "$vmajor" -lt 4 \
191               || (test "$vmajor" -eq 4 && test "$vminor" -lt 6); then
192          MKINFO=no
193       fi
194    fi
195    if test "X$MKINFO" = "Xno"; then
196       AC_MSG_ERROR([You have requested a build
197 of the documentation.  For this to work, you must have version 4.6 or newer of
198 the GNU texinfo package.  You seem to have
202 Please update to a newer version of texinfo or disable building of
203 the documentation with --disable-doc
205    fi
207    AC_PATH_PROG(TEXI2DVI, texi2dvi, no)
208    if test "X$TEXI2DVI" = "Xno"; then
209       AC_MSG_ERROR([You have requested a build
210 of the documentation.  For this to work, you must have the texi2dvi program
211 installed.  Alternatively, you can disable building the documentation with
212 --disable-doc.])
213    fi
216         AC_PATH_PROG(PERL, perl, notfound)
217         if test "X$PERL" = "Xnotfound"; then
218                         AC_MSG_ERROR([You have requested a build
219 of the documentation.  For this to work, you must have perl installed.
220 Alternatively, you can disable building the documentation with
221 --disable-doc.
223         fi
226    AC_PATH_PROG([KPSEWHICH], [kpsewhich], [no])
227    if test "X$KPSEWHICH" = "Xno"; then
228       AC_MSG_ERROR([You have requested a build
229 of the documentation.  For this to work, you must have a functional install of
230 TeX and LaTeX.  kpsewhich is part of TeX.
231 Alternatively, you can disable building the documentation with
232 --disable-doc.])
233    fi
235    AC_MSG_CHECKING([If your TeX installation contains epsf.tex])
236    f=`$KPSEWHICH epsf.tex`
237    if test $? -eq 0 ; then
238         AC_MSG_RESULT([yes ($f)])
239    else
240         AC_MSG_RESULT([no])
241         AC_MSG_ERROR([You have requested a build
242 of the documentation.  For this to work, you must have a functional install of
243 TeX and LaTeX that includes epsf.tex.  On some linux distributions this is
244 part of the texlive-generic-recommended package.
245 Alternatively, you can disable building the documentation with
246 --disable-doc.])
247    fi
251 ##########################################################################
255 # FIXME:  for now, only try to add -rdynamic if we're using gcc.  We really
256 # need to figure out what the correct test is here.  In the mean time, this
257 # should let things build with SunPRO again.
258 if test "x$GCC" = "xyes"; then
259 AC_MSG_CHECKING([If the compiler accepts -rdynamic])
260 old_LDFLAGS="$LDFLAGS"
261 LDFLAGS="$LDFLAGS -rdynamic"
262 AC_LINK_IFELSE([AC_LANG_PROGRAM()],
263         [AC_MSG_RESULT([yes])],
264         [LDFLAGS="$old_LDFLAGS"
265         AC_MSG_RESULT([no])
266         ])
269 # ------------- HID config -------------------
271 hid_guis=""
272 hid_printers=""
273 hid_exporters=""
274 hid_always=""
276 for hid in `cd $srcdir/src/hid; echo *`; do
277     F=$srcdir/src/hid/$hid/hid.conf
278     if test -f $F 
279     then
280     echo checking $F
281         . $F
282         case $type in
283           gui ) hid_guis="$hid_guis $hid" ;;
284           printer ) hid_printers="$hid_printers $hid" ;;
285           export ) hid_exporters="$hid_exporters $hid" ;;
286           always ) hid_always="$hid_always $hid" ;;
287         esac
288     fi
289 done
291 AC_MSG_CHECKING([for which gui to use])
292 AC_ARG_WITH([gui],
293 [  --with-gui=            Specify the GUI to use: batch gtk lesstif [[default=gtk]]],
295 [with_gui=gtk]
297 AC_MSG_RESULT([$with_gui])
298 case " $hid_guis no none " in
299      *\ $with_gui\ * ) HIDLIST="$with_gui" ;;
300      * ) AC_MSG_ERROR([$with_gui is not a valid gui]) ;;
301 esac
303 if test x"$with_gui" = x"none" -o x"$with_gui" = x"no"
304 then
305     HIDLIST=
308 AC_MSG_CHECKING([whether to enable toporouter])
309 AC_ARG_ENABLE([toporouter],
310  [AS_HELP_STRING([--enable-toporouter], [build toporouter [default=yes]]) ]
312 AS_CASE(["x$enable_toporouter"],[xyes | xno],,
313  [enable_toporouter=yes
316 AC_MSG_RESULT([$enable_toporouter])
317 AM_CONDITIONAL([WITH_TOPOROUTER], test $enable_toporouter != no)
319 AC_MSG_CHECKING([whether to enable toporouter output])
320 AC_ARG_ENABLE([toporouter-output],
321  [AS_HELP_STRING([--enable-toporouter-output], [enable toporouter graphical output [default=no]]) ]
323 AS_CASE(["z$enable_toporouter_output"],[zyes | zno],,
324  [enable_toporouter_output=no]
326 AC_MSG_RESULT([$enable_toporouter_output])
327 AS_CASE([$enable_toporouter_output],[yes],
329   topo_output_enabled=1
330  ],
332   topo_output_enabled=0
335 AC_DEFINE_UNQUOTED([TOPO_OUTPUT_ENABLED], [$topo_output_enabled],
336  [Define to 1 to enable toporouter graphical output]
339 PKG_PROG_PKG_CONFIG()
341 if test "x$enable_toporouter_output" = "xyes"; then
342    PKG_CHECK_MODULES(CAIRO, cairo,,
343                      [AC_MSG_ERROR([Cannot find cairo, needed by the toporouter
344 Please review the following errors:
345 $CAIRO_PKG_ERRORS])]
346    )
349 AC_MSG_CHECKING([for whether to use DBUS])
350 AC_ARG_ENABLE([dbus],
351 [  --enable-dbus           Enable DBUS IPC],
352 [],[
353         case " $with_gui " in
354                 *\ gtk\ *)     enable_dbus=yes ;;
355                 *\ lesstif\ *) enable_dbus=yes ;;
356                 * )            enable_dbus=no ;;
357         esac
360 AC_MSG_RESULT([$enable_dbus])
361 AM_CONDITIONAL(WITH_DBUS, test x$enable_dbus = xyes)
363 if test "x$enable_dbus" = "xyes"; then
364         case " $with_gui " in
365                 *\ gtk\ *) ;;
366                 *\ lesstif\ *) ;;
367                 * ) AC_MSG_ERROR([DBUS enabled but only works with a mainloop capable GUI HID.
368 Either do not use --enable-dbus or enable the gtk or lesstif GUI HID.])
369         esac
370         
371         PKG_CHECK_MODULES(DBUS, dbus-1 >= 0.61,
372                 [saved_LIBS="$LIBS"
373                  LIBS="$LIBS $DBUS_LIBS"
374                  AC_CHECK_FUNCS(dbus_watch_get_unix_fd)
375                  LIBS="$saved_LIBS" ],
376                 [AC_MSG_ERROR([Cannot find dbus-1 >= 0.61, install it and rerun ./configure
377 Please review the following errors:
378 $DBUS_PKG_ERRORS])]
379         )
380         DBUS_VERSION=`$PKG_CONFIG dbus-1 --modversion`
381         
382         AC_DEFINE([HAVE_DBUS], 1,
383                 [Define to 1 if DBUS IPC is to be compiled in])
388 AC_MSG_CHECKING([for whether to use GL drawing])
389 AC_ARG_ENABLE([gl],
390 [  --enable-gl           Enable GL drawing (with GTK HID)],
391 [],[
392         case " $with_gui " in
393                 *\ gtk\ *) enable_gl=yes;;
394                 * ) enable_gl=no;;
395         esac
397 AC_MSG_RESULT([$enable_gl])
398 AM_CONDITIONAL(USE_GL, test x$enable_gl = xyes)
400 if test "x$enable_gl" = "xyes"; then
401         case " $with_gui " in
402                 *\ gtk\ *) ;;
403                 * ) AC_MSG_ERROR([GL drawing enabled but only works with the GTK HID.
404 Either do not use --enable-gl or enable the gtk HID.])
405         ;;
406         esac
408         AX_CHECK_GL
409         AS_IF([test X$no_gl = Xyes],
410               [AC_MSG_FAILURE([OpenGL is required.])])
412         AX_CHECK_GLU
413         AS_IF([test X$no_glu = Xyes],
414               [AC_MSG_FAILURE([The OpenGL GLU library is required.])])
416         AC_DEFINE([ENABLE_GL], 1,
417                 [Define to 1 if GL support is to be compiled in])
420 AC_MSG_CHECKING([for which printer to use])
421 AC_ARG_WITH([printer],
422 [  --with-printer=        Specify the printer: lpr [[default=lpr]]],
423 [],[with_printer=lpr])
424 AC_MSG_RESULT([$with_printer])
425 case " $hid_printers " in
426      *\ $with_printer\ * )
427          HIDLIST="$HIDLIST $with_printer"
428          ;;
429      * ) AC_MSG_ERROR([$with_printer is not a valid printer]) ;;
430 esac
432 AC_MSG_CHECKING([for which exporters to use])
433 AC_ARG_WITH([exporters],
434 [  --with-exporters=       Enable export devices: bom gerber gcode nelma png ps [[default=bom gerber gcode nelma png ps]]],
435 [],[with_exporters=$hid_exporters])
436 AC_MSG_RESULT([$with_exporters])
437 for e in `echo $with_exporters | sed 's/,/ /g'`; do
438     case " $hid_exporters " in
439       *\ $e\ * )
440          HIDLIST="$HIDLIST $e"
441          ;;
442       * ) AC_MSG_ERROR([$e is not a valid exporter]) ;;
443     esac
444 done
446 if test "X$enable_jpeg" = "Xno" -a "X$enable_gif" = "Xno" -a "X$enable_png" = "Xno" ; then
447         case " ${HIDLIST} " in
448                 *\ png\ *)
449                         AC_MSG_ERROR([you have requested the png HID but turned off all output
450 formats!  If you do not want gif/jpeg/png output, use --with-exporters to list
451 which exporters you want and do not list png there.])
452                         ;;
454                 *)
455                         ;;
456         esac
459 for hid in $HIDLIST; do
460     F=$srcdir/src/hid/$hid/hid.conf
461     if test -f $F ; then
462         echo checking $hid dependencies
463         deps=
464         . $F
465         for dep in $deps; do
466             if test "X`echo $HIDLIST | grep $dep`" = "X"; then
467                 AC_MSG_ERROR([you have requested the $hid HID but not the $dep HID, which it depends on])
468             fi
469         done
470    fi
471 done
473 for e in $HIDLIST; do
474     HIDLIBS="$HIDLIBS lib$e.a"
475 done
477 AC_SUBST(HIDLIST)
478 AC_SUBST(HIDLIBS)
480 # ------------- end HID config -------------------
482 ######################################################################
484 # desktop integration
487 AC_PATH_PROG(SETENV, env, [])
488 AC_PATH_PROG(GTK_UPDATE_ICON_CACHE_BIN, gtk-update-icon-path, [true])
490 # Change default location for XDG files (MIME and Icons)
491 AC_ARG_WITH(xdgdatadir, [  --with-xdgdatadir=path  Change where the theme icons 
492 and mime registrations are installed [[DATADIR]]], [opt_xdgdatadir=$withval])
494 # Change default location for KDE data files (KDE MIME registrations)
495 AC_ARG_WITH(kdedatadir, [  --with-kdedatadir=path  Change where the KDE mime reg
496 istrations are installed [[DATADIR]]], [opt_kdedatadir=$withval])
498 if test x$opt_xdgdatadir = x; then
499         # path was not specified with --with-xdgdatadir
500         XDGDATADIR='${datadir}'
501 else
502         # path WAS specified with --with-xdgdatadir
503         XDGDATADIR="$opt_xdgdatadir"
505 AC_SUBST(XDGDATADIR)
507 if test x$opt_kdedatadir = x; then
508         # path was not specified with --with-kdedatadir
509         KDEDATADIR='${datadir}'
510 else
511         # path WAS specified with --with-kdedatadir
512         KDEDATADIR="$opt_kdedatadir"
514 AC_SUBST(KDEDATADIR)
516 AC_ARG_ENABLE(update-desktop-database,
517         AC_HELP_STRING([--disable-update-desktop-database],
518         [do not update desktop database after installation]),,
519         enable_update_desktop_database=yes)
521 AM_CONDITIONAL(ENABLE_UPDATE_DESKTOP_DATABASE, test x$enable_update_desktop_database = xyes)
523 if test x$enable_update_desktop_database = xyes ; then
524         AC_PATH_PROG(UPDATE_DESKTOP_DATABASE, [update-desktop-database], no)
525         if test $UPDATE_DESKTOP_DATABASE = no; then
526         AC_MSG_ERROR([Cannot find update-desktop-database, make sure it is installed and in your PATH, or configure with --disable-update-desktop-database])
527         fi
530 AC_ARG_ENABLE(update-mime-database,
531         AC_HELP_STRING([--disable-update-mime-database],
532         [do not update mime database after installation]),,
533         enable_update_mime_database=yes)
535 AM_CONDITIONAL(ENABLE_UPDATE_MIME_DATABASE, test x$enable_update_mime_database = xyes)
537 if test x$enable_update_mime_database = xyes ; then
538         AC_PATH_PROG(UPDATE_MIME_DATABASE, [update-mime-database], no)
539         if test $UPDATE_MIME_DATABASE = no; then
540         AC_MSG_ERROR([Cannot find update-mime-database, make sure it is installed and in your PATH, or configure with --disable-update-mime-database])
541         fi
545 ######################################################################
547 AC_PATH_PROGS(M4, gm4 m4, [none])
548 if test "X$M4" = "Xnone" ; then
549         AC_MSG_ERROR([Did not find a m4 executible.  You need to make sure
550         that m4 is installed on your system and that m4 is in your path])
552 AC_MSG_CHECKING([if $M4 has the division involving negative numbers bug])
553 pcb_m4_r=`echo "eval(-2/2)" | $M4`
554 if test "$pcb_m4_r" != "-1" ; then
555         AC_MSG_RESULT([yes])
556         AC_MSG_ERROR([It appears that $M4 has a bug involving division
557 with negative numbers.  In particular it just returned the result that
558 -2/2 = $pcb_m4_r instead of -1.  This is a known bug in GNU m4-1.4.9.  Please
559 install a non-broken m4.])
560 else
561         AC_MSG_RESULT([no])
565 AC_PATH_PROGS(WISH, wish wish85 wish8.5 wish83 wish8.3 wish80 wish8.0 cygwish83 cygwish80,[none])
566 if test "X$WISH" = "Xnone" ; then
567         AC_MSG_ERROR([Did not find the wish executible.  You need to make sure
568         that tcl is installed on your system and that wish is in your path])
571 AC_DEFINE_UNQUOTED(M4,$M4,[m4 executible])
572 GNUM4=$M4
573 AC_SUBST(GNUM4)
574 AC_DEFINE_UNQUOTED(GNUM4,"$M4",[m4 program used by pcb])
576 AC_PATH_PROG(PDFLATEX, pdflatex, notfound)
577 AM_CONDITIONAL(MISSING_PDFLATEX, test x$PDFLATEX = xnotfound)
579 AC_PATH_PROG(TEXI2DVI, texi2dvi, notfound)
580 AM_CONDITIONAL(MISSING_TEXI2DVI, test x$TEXI2DVI = xnotfound)
582 AC_PATH_PROG(PS2PDF, ps2pdf, notfound)
583 AM_CONDITIONAL(MISSING_PS2PDF, test x$PS2PDF = xnotfound)
585 # used to build some of the getting started guide
586 AC_PATH_PROG(GSCHEM, gschem, notfound)
587 AM_CONDITIONAL(MISSING_GSCHEM, test x$GSCHEM = xnotfound)
589 if test "X$docs_yesno" = "Xyes" -a "X$pcb_git_version" = "Xyes" ; then
590         if test "$PDFLATEX" = "notfound" -o "$TEXI2DVI" = "notfound" -o "$PS2PDF" = "notfound" ; then
591                 AC_MSG_ERROR([It appears that you are building from a source tree obtained
592 via git but you do not have the required tools installed to build the documentation.  Here
593 is a list of tools and the detected values:
594 PDFLATEX:  $PDFLATEX
595 TEXI2DVI:  $TEXI2DVI
596 PS2PDF:    $PS2PDF
597 GSCHEM:    $GSCHEM
599 Either make sure these tools are installed or disable building and installing the documentation
600 by using the --disable-doc configure option.
602         fi
605 ############################################################################
607 # These checks are for tools used by the testsuite.  It will not be fatal
608 # if these are missing because this is primarily for developer use.  It is
609 # possible that we might add some --enable flag in the future that forces
610 # full tools for development work.
612 # Check for ImageMagick tools used by the testsuite
613 AC_PATH_PROG(IM_ANIMATE, animate, notfound)
614 AC_PATH_PROG(IM_COMPARE, compare, notfound)
615 AC_PATH_PROG(IM_COMPOSITE, composite, notfound)
616 AC_PATH_PROG(IM_CONVERT, convert, notfound)
617 AC_PATH_PROG(IM_DISPLAY, display, notfound)
618 AC_PATH_PROG(IM_MONTAGE, montage, notfound)
619 missing_magick=""
620 test "${IM_ANIMATE}" != "notfound" || missing_magick="${missing_magick} animate"
621 test "${IM_COMPARE}" != "notfound" || missing_magick="${missing_magick} compare"
622 test "${IM_COMPOSITE}" != "notfound" || missing_magick="${missing_magick} composite"
623 test "${IM_CONVERT}" != "notfound" || missing_magick="${missing_magick} convert"
624 test "${IM_DISPLAY}" != "notfound" || missing_magick="${missing_magick} display"
625 test "${IM_MONTAGE}" != "notfound" || missing_magick="${missing_magick} montage"
627 AC_MSG_CHECKING([if all ImageMagick tools needed for the testsuite were found])
628 if test "X${missing_magick}" != "X" ; then
629     AC_MSG_RESULT([no.  The testsuite will be disabled because the following
630 tools from the ImageMagick suite were not found:
631 ${missing_magick}
632 No loss in pcb functionality should be experienced, you just will not
633 be able to run the full regression testsuite.
635     have_magick=no
636 else
637     AC_MSG_RESULT([yes])
638     have_magick=yes
641 have_test_tools=yes
643 test $have_magick = yes || have_test_tools=no
645 # the RS274-X export HID is partially checked by looking at the result with
646 # gerbv
647 AC_PATH_PROG(GERBV, gerbv, notfound)
648 test $GERBV != notfound || have_test_tools=no
651 AM_CONDITIONAL(HAVE_TEST_TOOLS, test x$have_test_tools = xyes)
652 AC_MSG_CHECKING([if all the requried testsuite tools were found])
653 if test x$have_test_tools = xyes ; then
654         AC_MSG_RESULT([yes])
655 else
656         AC_MSG_RESULT([no -- the testsuite will be disabled])
661 ############################################################################
664 dnl Checks for libraries.
665 AC_CHECK_LIB(m, sqrt)
666 AC_CHECK_LIB(dl, dlopen)
667 AC_CHECK_LIB(xnet, gethostbyname)
668 AC_CHECK_LIB(fl, yywrap)
669 AC_CHECK_FUNCS(strerror)
670 AC_CHECK_FUNCS(regcomp re_comp)
671 AC_CHECK_FUNCS(logf expf rint)
672 AC_CHECK_FUNCS(vsnprintf)
673 AC_CHECK_FUNCS(getpwuid getcwd)
674 AC_CHECK_FUNCS(rand random)
675 AC_CHECK_FUNCS(stat)
677 AC_CHECK_FUNCS(mkdtemp)
679 # normally used for all file i/o
680 AC_CHECK_FUNCS(popen)
682 # for lrealpath.c
683 AC_CHECK_FUNCS(realpath canonicalize_file_name)
684 libiberty_NEED_DECLARATION(canonicalize_file_name)
686 # for pcb_spawnvp in action.c on Windows
687 AC_CHECK_FUNCS(_spawnvp)
689 AC_HEADER_STDC
690 AC_CHECK_HEADERS(limits.h locale.h string.h sys/types.h regex.h pwd.h)
691 AC_CHECK_HEADERS(sys/socket.h netinet/in.h netdb.h sys/param.h sys/times.h sys/wait.h)
692 AC_CHECK_HEADERS(dlfcn.h)
694 if test "x${WIN32}" = "xyes" ; then
695         AC_CHECK_HEADERS(windows.h)
697 # Search for glib
698 PKG_CHECK_MODULES(GLIB, glib-2.0, ,
699                 [AC_MSG_RESULT([Note: cannot find glib-2.0.
700 You may want to review the following errors:
701 $GLIB_PKG_ERRORS])]
704 need_gdlib=no
705 with_gif=no
706 with_png=no
707 with_jpeg=no
709 for e in $HIDLIST; do
710     case $e in
711       lesstif )
712         AC_PATH_XTRA
713         save_CPPFLAGS="$CPPFLAGS"
714         CPPFLAGS="$X_CFLAGS"
715         AC_CHECK_LIB(X11, XOpenDisplay, , , $X_LIBS)
716         AC_CHECK_LIB(ICE, main, , , $X_LIBS)
717         AC_CHECK_LIB(SM, main, , , $X_LIBS)
718         AC_CHECK_LIB(Xext, main, , , $X_LIBS)
719         AC_CHECK_LIB(Xt, XtOpenDisplay, , , $X_LIBS)
720         AC_CHECK_LIB(Xmu, main, , , $X_LIBS)
721         AC_CHECK_LIB(Xpm, main, , , $X_LIBS)
722         AC_CHECK_LIB(Xm, XmCreateMainWindow, , , $X_LIBS)
723         CPPFLAGS="$save_CPPFLAGS"
724         case $ac_cv_lib_Xm_XmCreateMainWindow in
725           no )
726             AC_MSG_ERROR([You don't seem to have the Lesstif development environment installed.])
727             ;;
728           * ) ;;
729         esac
730         AC_CHECK_HEADERS(Xm/Xm.h)
731         case $ac_cv_header_Xm_Xm_h in
732           no )
733             AC_MSG_ERROR([You don't seem to have the Lesstif development environment installed.])
734             ;;
735           * ) ;;
736         esac
737         ;;
739       gtk )
740         # Check for pkg-config
741         AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
742         if test "$PKG_CONFIG" = "no"; then
743                 AC_MSG_ERROR([Cannot find pkg-config, make sure it is installed and in your PATH])
744         fi
746         PKG_CHECK_MODULES(GTK, gtk+-2.0 >= 2.18.0, ,
747                 [AC_MSG_ERROR([Cannot find gtk+ >= 2.18.0, install it and rerun ./configure
748 Please review the following errors:
749 $GTK_PKG_ERRORS])]
750         )
751         GTK_VERSION=`$PKG_CONFIG gtk+-2.0 --modversion`
752         GLIB_VERSION=`$PKG_CONFIG glib-2.0 --modversion`
754         if test "x$enable_gl" = "xyes"; then
755                 # Check for GtkGLExt
756                 PKG_CHECK_MODULES(GTKGLEXT, gtkglext-1.0 >= 1.0.0, , [AC_MSG_ERROR([
757 *** Required version of gtkglext is not installed - please install first ***
758 Please review the following errors:
759 $GTKGLEXT_PKG_ERRORS])]
760                 )
761         GTKGLEXT_VER=`$PKG_CONFIG gtkglext-1.0 --modversion`
762         fi
764         ;;
766       png)
767         need_gdlib=yes
768         AC_MSG_CHECKING([if GIF output from the png HID is desired])
769         AC_ARG_ENABLE([gif],
770                 [  --disable-gif           Disable support for gif output when the png HID is used [[default=include gif support]]],
771                 [
772                 if test "X$enable_gif" != "Xno" ; then
773                         AC_MSG_RESULT([yes])
774                         with_gif=yes
775                 else
776                         AC_MSG_RESULT([no])
777                 fi
778                 ],
779                 [
780                 AC_MSG_RESULT([yes])
781                 with_gif=yes
782                 ])
784         AC_MSG_CHECKING([if JPEG output from the png HID is desired])
785         AC_ARG_ENABLE([jpeg],
786                 [  --disable-jpeg          Disable support for JPEG output when the png HID is used [[default=include JPEG support]]],
787                 [
788                 if test "X$enable_jpeg" != "Xno" ; then
789                         AC_MSG_RESULT([yes])
790                         with_jpeg=yes
791                 else
792                         AC_MSG_RESULT([no])
793                 fi
794                 ],
795                 [
796                 AC_MSG_RESULT([yes])
797                 with_jpeg=yes
798                 ])
800         AC_MSG_CHECKING([if PNG output from the png HID is desired])
801         AC_ARG_ENABLE([png],
802                 [  --disable-png           Disable support for PNG output when the png HID is used [[default=include PNG support]]],
803                 [
804                 if test "X$enable_png" != "Xno" ; then
805                         AC_MSG_RESULT([yes])
806                         with_png=yes
807                 else
808                         AC_MSG_RESULT([no])
809                 fi
810                 ],
811                 [
812                 AC_MSG_RESULT([yes])
813                 with_png=yes
814                 ])
815         ;;
817       gcode|nelma)
818         need_gdlib=yes
819         with_png=yes
820         ;;
822     esac
823 done
825 if test "$need_gdlib" = "yes"; then
826         # Check for gdlib-config for gd (www.boutell.com/gd)
827         AC_PATH_PROG(GDLIB_CONFIG, gdlib-config, no)
828         if test "$GDLIB_CONFIG" = "no"; then
829                 AC_MSG_RESULT([Cannot find gdlib-config.
830 Make sure it is installed and in your PATH.
831 gdlib-config is part of the GD library available from www.boutell.com/gd.
832 This is needed for the png HID.  I will look for libgd anyway and maybe
833 you will get lucky.
835                 if test "$WIN32" != "yes" ; then
836                         AC_CHECK_LIB(gd,main,,
837                         AC_MSG_ERROR([[You have requested gcode, nelma, or png HIDs  but -lgd could not be found]]))
838                 else 
839                         AC_CHECK_LIB(bgd,main,,
840                         AC_MSG_ERROR([[You have requested gcode, nelma, or png HIDs  but -lbgd could not be found]]))
841                 fi
842         else
843                 if test "$WIN32" = "yes" ; then
844                         GD=bgd
845                 else
846                         GD=gd
847                 fi
848                 AC_MSG_CHECKING([for libgd cflags])
849                 GD_CFLAGS="`$GDLIB_CONFIG --cflags`"
850                 AC_MSG_RESULT([$GD_CFLAGS])
851                 AC_MSG_CHECKING([for libgd libs])
852                 GD_LIBS="`$GDLIB_CONFIG --ldflags` `$GDLIB_CONFIG --libs` -l${GD}"
853                 AC_MSG_RESULT([$GD_LIBS])
854         fi
855    
856         # since some linux systems evidently install gdlib-config but fail to
857         # install the headers (nice), check for the header too and fail if it
858         # is not there.
859         save_CPPFLAGS="$CPPFLAGS"
860         CPPFLAGS="$CPPFLAGS $GD_CFLAGS"
861         AC_CHECK_HEADERS(gd.h)
862         CPPFLASS="$save_CPPFLAGS"
863         case $ac_cv_header_gd_h in
864              no )
865                 AC_MSG_ERROR([
866 You evidentally do not have a complete installation of the GD library available from www.boutell.com/gd.
867 This is needed for the nelma and/or png HID.
869                 ;;
870              * ) ;;
871         esac
872         
873         # Some versions of gd (prior to the expiration of the
874         # patent related to gif compression) do not support
875         # gif output.  Check for that here.
876         save_LIBS="$LIBS"
877         LIBS="$save_LIBS $GD_LIBS $X_LIBS"
879         if test "X$with_gif" = "Xyes" ; then
880                 AC_CHECK_FUNCS(gdImageGif)
881                 if test "$ac_cv_func_gdImageGif" != "yes"; then
882                         AC_MSG_ERROR([Your gd installation does not appear to include gif support.
883 You may need to update your installation of gd or disable
884 gif export with --disable-gif])
885                 fi
886         fi
888         if test "X$with_jpeg" = "Xyes" ; then
889                 AC_CHECK_FUNCS(gdImageJpeg)
890                 if test "$ac_cv_func_gdImageJpeg" != "yes"; then
891                         AC_MSG_ERROR([Your gd installation does not appear to include JPEG support.
892 You may need to update your installation of gd or disable
893 JPEG export with --disable-jpeg])
894                 fi
895         fi
897         if test "X$with_png" = "Xyes" ; then
898                 AC_CHECK_FUNCS(gdImagePng)
899                 if test "$ac_cv_func_gdImagePng" != "yes"; then
900                         AC_MSG_ERROR([Your gd installation does not appear to include PNG support.
901 You may need to update your installation of gd or disable
902 PNG export with --disable-png])
903                 fi
904         fi
905         LIBS="$save_LIBS"
908 AM_CONDITIONAL(PNG, test x$with_png = xyes)
909 AM_CONDITIONAL(GIF, test x$with_gif = xyes)
911 # ------------- check if png previews should be built for pcblib-newlib
912 AC_MSG_CHECKING([if the m4lib to newlib export should create png previews])
913 AC_ARG_ENABLE(
914         [m4lib-png],
915         [  --enable-m4lib-png      Enable creating png previews for the m4 library],
916         [],[enable_m4lib_png=no])
917 AC_MSG_RESULT([$enable_m4lib_png])
918 AM_CONDITIONAL(PNG_PREVIEW, test x$enable_m4lib_png = xyes)
921 # Run away.... more ugly stuff here.  By default we don't actually build
922 # pcblib-newlib from pcblib unless we are building from cvs or git sources.
923 # The reason is it takes a while and requires the png HID.  The problem is,
924 # what if someone wants to use --enable-m4lib-png but the tarball was built
925 # without the previews.  Or, what if someone does not want the PNG previews
926 # but the person building the tarball included them.  Ugh!  So what the following
927 # code attempts to do is detect that mismatch situation.  Note that we only
928 # want to kick this code in when *not* building from git or cvs sources.
929 build_pcblib_newlib=no
930 if test "$pcb_sources" = "tarball" ; then
931         AC_MSG_CHECKING([If pcblib-newlib was built with png previews])
932         stamp=$srcdir/lib/pcblib-newlib.stamp
933         if test ! -f ${stamp} ; then
934                 AC_MSG_RESULT([unknown, missing ${stamp}])
935                 build_pcblib_newlib=yes
936         else
937                 if test "`cat ${stamp}`" = "png-preview=yes" ; then
938                         AC_MSG_RESULT([yes])
939                         # lib exists and built with preview.
940                         # if we don't want the preview, than rebuild
941                         if test x$enable_m4lib_png != xyes ; then
942                                 build_pcblib_newlib=yes
943                         fi
944                 else
945                         AC_MSG_RESULT([no])
946                         # lib exists and built without preview.
947                         # if we want the preview, than rebuild
948                         if test x$enable_m4lib_png = xyes ; then
949                                 build_pcblib_newlib=yes
950                         fi
951                 fi
952         fi
953 else
954         build_pcblib_newlib=yes
956 AC_MSG_CHECKING([If pcblib-newlib needs to be rebuilt])
957 AC_MSG_RESULT([$build_pcblib_newlib])
958 AM_CONDITIONAL(BUILD_PCBLIB_NEWLIB, test x$build_pcblib_newlib = xyes)
960 if test "X$cross_compiling" = "Xyes" ; then
961         # we are cross compiling so we will need a build host binary for pcb
962         AC_PATH_PROG(PCB, [pcb], [notfound])
963 else
964         PCB="\${top_builddir}/src/pcb"
966 AC_SUBST(PCB)
968 # now make see how essential it was that we have a pcb executable for the build
969 # host
970 if test "X$pcb_git_version" = "Xyes" ; then
971         if test "X$docs_yesno" = "Xyes" -o "X$enable_m4lib_png" = "Xyes" ; then
972                 if test "$PCB" = "notfound" ; then
973                         AC_MSG_ERROR([You have selected a build with m4lib png
974 previews enabled and/or with building the documentation enabled but you also
975 appear to be cross-compiling.  For this to work, you must have a pcb installed that
976 can run on this machine (the build machine) because it is needed for generating
977 library footprint png previews as well as some of the figures in the documentation.
978 If you wish to skip building the documentation and the footprint previews then add
979 --disable-doc --disable-m4lib-png
980 This will allow your cross build to work.])
981                 fi
982         fi
985 # ------------- Xrender -------------------
986 have_xrender=no
987 AC_CHECK_LIB(Xrender,XRenderQueryExtension,have_xrender=yes,have_xrender=no,$X_LIBS)
989 AC_ARG_ENABLE([xrender],
990 [  --disable-xrender       Compile and link with Xrender [default=yes]])
991 case "$have_xrender:$enable_xrender" in
992    no:* ) ;;
993    *:no ) ;;
994    * )
995      X_LIBS="-lXrender $X_LIBS"
996      AC_DEFINE([HAVE_XRENDER], 1,
997                 [Define to 1 if Xrender is available])
998      ;;
999 esac
1001 # ------------- Xinerama -------------------
1002 have_xinerama=no
1003 AC_CHECK_LIB(Xinerama,XineramaQueryExtension,have_xinerama=yes,have_xinerama=no,$X_LIBS)
1005 AC_ARG_ENABLE([xinerama],
1006 [  --disable-xinerama       Compile and link with Xinerama [default=yes]])
1007 case "$have_xinerama:$enable_xinerama" in
1008    no:* ) ;;
1009    *:no ) ;;
1010    * )
1011      X_LIBS="-lXinerama $X_LIBS"
1012      AC_DEFINE([HAVE_XINERAMA], 1,
1013                 [Define to 1 if Xinerama is available])
1014      ;;
1015 esac
1017 # ------------- dmalloc -------------------
1018 dnl dmalloc checks
1019 with_dmalloc=no
1020 AC_MSG_CHECKING([if dmalloc debugging should be enabled])
1021 AC_ARG_ENABLE([dmalloc],
1022 [  --enable-dmalloc        Compile and link with dmalloc for malloc debugging [default=no]],
1024 if test "X$enable_dmalloc" != "Xno" ; then
1025         AC_MSG_RESULT([yes])
1026         AC_CHECK_HEADER(dmalloc.h,,
1027                 AC_MSG_ERROR([You have requested dmalloc debugging but dmalloc.h could not be found]))
1028         AC_CHECK_LIB(dmalloc,main,,
1029                 AC_MSG_ERROR([You have requested dmalloc debugging but -ldmalloc could not be found]))
1030         DMALLOC_LIBS="-ldmalloc"
1031         with_dmalloc=yes
1032 else
1033         AC_MSG_RESULT([no])
1034         DMALLOC_LIBS=""
1038         AC_MSG_RESULT([no])
1039         DMALLOC_LIBS=""
1042 # ------------- ElectricFence -------------------
1043 dnl ElectricFence checks
1044 with_efence=no
1045 AC_MSG_CHECKING([if ElectricFence debugging should be enabled])
1046 AC_ARG_ENABLE([efence],
1047 [  --enable-efence         Link with ElectricFence for malloc debugging [default=no]],
1049 if test "X$enable_efence" != "Xno" ; then
1050         AC_MSG_RESULT([yes])
1051         AC_CHECK_LIB(efence,main,,
1052                 AC_MSG_ERROR([You have requested ElectricFence debugging but -lefence could not be found]))
1053         with_efence=yes
1054 else
1055         AC_MSG_RESULT([no])
1059 AC_MSG_RESULT([no])
1062 # ------------- Enable Debug code -------------------
1063 AC_MSG_CHECKING([for whether to enable debugging code])
1064 AC_ARG_ENABLE([debug],
1065 [  --enable-debug          Enable debugging code],
1066 [],[enable_debug=no])
1068 AC_MSG_RESULT([$enable_debug])
1069 AM_CONDITIONAL(DEBUG_BUILD, test x$enable_debug = xyes)
1071 # ------------- mkdir required for win32 compatibility ------------
1072 # WIN32 mkdir takes only one argument, POSIX takes two.
1073 # #include "misc.h" where mkdir is required.
1074 m4_include([m4/m4_ax_func_mkdir.m4])
1075 AX_FUNC_MKDIR
1077 # ------------- Type used for "Coord" type -------------------
1079 AC_CHECK_HEADERS(stdint.h)
1080 AC_ARG_ENABLE([coord64],
1081 [  --enable-coord64        Force 64-bit coordinate types],
1082 [],[enable_coord64=no])
1083 AC_ARG_ENABLE([coord32],
1084 [  --enable-coord32        Force 32-bit coordinate types],
1085 [],[enable_coord32=no])
1087 COORDTYPE="long"
1089 echo "$enable_coord32:$enable_coord64:$ac_cv_header_stdint_h"
1090 case "$enable_coord32:$enable_coord64:$ac_cv_header_stdint_h" in
1091   yes:no:yes )
1092     COORD_TYPE="int32_t"
1093     COORD_MAX="INT32_MAX"
1094     ;;
1095   no:yes:yes )
1096     COORD_TYPE="int64_t"
1097     COORD_MAX="INT64_MAX"
1098     ;;
1099   yes:no:no  )
1100     COORD_TYPE="int"
1101     COORD_MAX="INT_MAX"
1102     ;;
1103   no:yes:no  )
1104     COORD_TYPE="long long"
1105     COORD_MAX="LLONG_MAX"
1106     ;;
1107   yes:yes:*  )
1108     AC_MSG_ERROR("*** cannot require both 32 and 64 bit coordinates")
1109     ;;
1110   *:*:*    )
1111     COORD_TYPE="long"
1112     COORD_MAX="LONG_MAX"
1113     ;;
1114 esac
1115 AC_DEFINE_UNQUOTED([COORD_TYPE],[$COORD_TYPE],
1116   [C type for Coordinates])
1117 AC_DEFINE_UNQUOTED([COORD_MAX],[$COORD_MAX],
1118   [Maximum value of coordinate type])
1120 # ------------- Complete set of CPPFLAGS and LIBS -------------------
1122 CPPFLAGS="$CPPFLAGS $X_CFLAGS $DBUS_CFLAGS $GLIB_CFLAGS $GTK_CFLAGS $GD_CFLAGS $CAIRO_CFLAGS $GTKGLEXT_CFLAGS $GLU_CFLAGS $GL_CFLAGS"
1123 LIBS="$LIBS $XM_LIBS $DBUS_LIBS $X_LIBS $GLIB_LIBS $GTK_LIBS $DMALLOC_LIBS $GD_LIBS $INTLLIBS $CAIRO_LIBS $GTKGLEXT_LIBS $GLU_LIBS $GL_LIBS"
1126 # if we have gcc then add -Wall
1127 if test "x$GCC" = "xyes"; then
1128         # see about adding some extra checks if the compiler takes them
1129         for flag in -Wall ; do
1130                 case " ${CFLAGS} " in
1131                         *\ ${flag}\ *)
1132                                 # flag is already present
1133                                 ;;
1134                         *)
1135                                 AC_MSG_CHECKING([if the compiler accepts ${flag}])
1136                                 ac_save_CFLAGS="$CFLAGS"
1137                                 CFLAGS="$CFLAGS ${flag}"
1138                                 AC_COMPILE_IFELSE([AC_LANG_PROGRAM()],
1139                                         [AC_MSG_RESULT([yes])],
1140                                         [AC_MSG_RESULT([no])
1141                                          CFLAGS="$ac_save_CFLAGS"
1142                                         ]
1143                                 )
1144                                 ;;
1145                 esac
1146         done
1149 CXXFLAGS="$CFLAGS"
1151 # Now add C-specific flags
1152 if test "x$GCC" = "xyes"; then
1153         # see about adding some extra checks if the compiler takes them
1154         for flag in -Wdeclaration-after-statement ; do
1155                 case " ${CFLAGS} " in
1156                         *\ ${flag}\ *)
1157                                 # flag is already present
1158                                 ;;
1159                         *)
1160                                 AC_MSG_CHECKING([if the compiler accepts ${flag}])
1161                                 ac_save_CFLAGS="$CFLAGS"
1162                                 CFLAGS="$CFLAGS ${flag}"
1163                                 AC_COMPILE_IFELSE([AC_LANG_PROGRAM()],
1164                                         [AC_MSG_RESULT([yes])],
1165                                         [AC_MSG_RESULT([no])
1166                                          CFLAGS="$ac_save_CFLAGS"
1167                                         ]
1168                                 )
1169                                 ;;
1170                 esac
1171         done
1174 # See if we are building gcc with C++.
1175 AC_ARG_ENABLE(build-with-cxx,
1176 [  --enable-build-with-cxx build with C++ compiler instead of C compiler],
1177 ENABLE_BUILD_WITH_CXX=$enableval,
1178 ENABLE_BUILD_WITH_CXX=no)
1180 case "$ENABLE_BUILD_WITH_CXX" in
1181   yes)
1182     CC_OR_CXX="$CXX"
1183     ;;
1184   no)
1185     CC_OR_CXX="$CC"
1186     ;;
1187 esac
1188 AC_SUBST(CC_OR_CXX)
1190 # font filename
1191 FONTFILENAME=${FONTFILENAME:-"default_font"}
1192 AC_SUBST(FONTFILENAME)
1193 AC_DEFINE_UNQUOTED(FONTFILENAME,"$FONTFILENAME",[File for default font])
1195 # standard autoconf variables
1196 CPPFLAGS="$CPPFLAGS -DPREFIXDIR=\\\"\${prefix}\\\""
1197 CPPFLAGS="$CPPFLAGS -DBINDIR=\\\"\${bindir}\\\""
1198 CPPFLAGS="$CPPFLAGS -DHOST=\\\"\${host}\\\""
1200 # directory for old-style library and for fonts
1201 PCBLIBDIR=${datadir}/pcb
1202 AC_SUBST(PCBLIBDIR)
1203 #AC_DEFINE_UNQUOTED(PCBLIBDIR,"$PCBLIBDIR",[Library directory])
1204 CPPFLAGS="$CPPFLAGS -DPCBLIBDIR=\\\"$PCBLIBDIR\\\""
1206 # name for old-style library
1207 LIBRARYFILENAME=pcblib
1208 AC_SUBST(LIBRARYFILENAME)
1209 AC_DEFINE_UNQUOTED(LIBRARYFILENAME,"$LIBRARYFILENAME",[library file name])
1212 # directory for new library
1213 PCBTREEDIR=${datadir}/pcb/newlib
1214 PCBTREEPATH=${PCBTREEDIR}:${PCBLIBDIR}/pcblib-newlib
1215 PCBTREEDIR=${PCBTREEDIR:-"$PCBTREEDIR"}
1216 AC_SUBST(PCBTREEDIR)
1217 AC_SUBST(PCBTREEPATH)
1218 #AC_DEFINE_UNQUOTED(PCBTREEDIR,"$PCBLIB",[top directory for new style pcb library])
1219 CPPFLAGS="$CPPFLAGS -DPCBTREEDIR=\\\"$PCBTREEDIR\\\""
1220 CPPFLAGS="$CPPFLAGS -DPCBTREEPATH=\\\"$PCBTREEPATH\\\""
1222 # Figure out relative paths
1223 AC_MSG_CHECKING([for the bindir to pcblibdir relative path])
1224 adl_COMPUTE_RELATIVE_PATHS([bindir:PCBLIBDIR:bindir_to_pcblibdir])
1225 adl_NORMALIZE_PATH([bindir_to_pcblibdir], [$PCB_DIR_SEPARATOR_S])
1226 AC_MSG_RESULT([$bindir_to_pcblibdir])
1227 AC_DEFINE_UNQUOTED(BINDIR_TO_PCBLIBDIR, "$bindir_to_pcblibdir", [Relative path from bindir to pcblibdir])
1229 AC_MSG_CHECKING([for the bindir to pcbtreedir relative path])
1230 adl_COMPUTE_RELATIVE_PATHS([bindir:PCBTREEDIR:bindir_to_pcbtreedir])
1231 adl_NORMALIZE_PATH([bindir_to_pcbtreedir], [$PCB_DIR_SEPARATOR_S])
1232 AC_MSG_RESULT([$bindir_to_pcbtreedir])
1233 AC_DEFINE_UNQUOTED(BINDIR_TO_PCBTREEDIR, "$bindir_to_pcbtreedir", [Relative path from bindir to pcbtreedir])
1236 AC_MSG_CHECKING([for the bindir to exec_prefix relative path])
1237 adl_COMPUTE_RELATIVE_PATHS([bindir:exec_prefix:bindir_to_execprefix])
1238 adl_NORMALIZE_PATH([bindir_to_execprefix], [$PCB_DIR_SEPARATOR_S])
1239 AC_MSG_RESULT([$bindir_to_execprefix])
1240 AC_DEFINE_UNQUOTED(BINDIR_TO_EXECPREFIX, "$bindir_to_execprefix", [Relative path from bindir to exec_prefix])
1243 BTNMOD=${BTNMOD:-"Mod1"}
1244 AC_SUBST(BTNMOD)
1246 TOPDIRS=
1247 for dir in src lib newlib doc example tools tutorial README_FILES
1249    test -d $dir/. && TOPDIRS="$TOPDIRS $dir"
1250 done
1251 AC_SUBST(TOPDIRS)
1253 AC_CONFIG_FILES(Makefile data/Makefile intl/Makefile po/Makefile.in)
1255 if test -d $srcdir/README_FILES; then
1256    AC_CONFIG_FILES(README_FILES/Makefile)
1258 if test -d $srcdir/doc; then
1259    AC_CONFIG_FILES(doc/Makefile)
1261 if test -d $srcdir/doc/gs; then
1262    AC_CONFIG_FILES(doc/gs/Makefile)
1263    AC_CONFIG_FILES(doc/gs/gafrc)
1264    AC_CONFIG_FILES(doc/gs/gschemrc)
1266 if test -d $srcdir/example; then
1267    AC_CONFIG_FILES(example/Makefile)
1268    AC_CONFIG_FILES(example/libraries/Makefile)
1270 if test -d $srcdir/lib; then
1271    AC_CONFIG_FILES(lib/CreateLibraryContents.sh)
1272    AC_CONFIG_FILES(lib/CreateLibrary.sh)
1273    AC_CONFIG_FILES(lib/ListLibraryContents.sh)
1274    AC_CONFIG_FILES(lib/Makefile)
1275    AC_CONFIG_FILES(lib/QueryLibrary.sh)
1276    AC_CONFIG_FILES(lib/qfp-ui)
1278 if test -d $srcdir/newlib; then
1279    AC_CONFIG_FILES(newlib/2_pin_thru-hole_packages/Makefile)
1280    AC_CONFIG_FILES(newlib/Makefile)
1281    AC_CONFIG_FILES(newlib/connectors/Makefile)
1282    AC_CONFIG_FILES(newlib/crystal/Makefile)
1283    AC_CONFIG_FILES(newlib/electro-optics/Makefile)
1284    AC_CONFIG_FILES(newlib/headers/Makefile)
1285    AC_CONFIG_FILES(newlib/keystone/Makefile)
1286    AC_CONFIG_FILES(newlib/msp430/Makefile)
1287    AC_CONFIG_FILES(newlib/not_vetted_ingo/Makefile)
1288    AC_CONFIG_FILES(newlib/sockets/Makefile)
1289    AC_CONFIG_FILES(newlib/tests/Makefile)
1291 AC_CONFIG_FILES(src/Makefile)
1292 AC_CONFIG_FILES(src/icons/Makefile)
1293 if test -d $srcdir/tools; then
1294    AC_CONFIG_FILES(tools/Makefile)
1296 if test -d $srcdir/tutorial; then
1297    AC_CONFIG_FILES(tutorial/Makefile)
1300 dnl testsuite
1301 AC_CONFIG_FILES(tests/inputs/Makefile)
1302 AC_CONFIG_FILES(tests/golden/Makefile)
1303 AC_CONFIG_FILES(tests/golden/hid_bom1/Makefile)
1304 AC_CONFIG_FILES(tests/golden/hid_bom2/Makefile)
1305 AC_CONFIG_FILES(tests/golden/hid_bom3/Makefile)
1306 AC_CONFIG_FILES(tests/golden/hid_bom4/Makefile)
1307 AC_CONFIG_FILES(tests/golden/hid_gcode1/Makefile)
1308 AC_CONFIG_FILES(tests/golden/hid_gcode2/Makefile)
1309 AC_CONFIG_FILES(tests/golden/hid_gcode3/Makefile)
1310 AC_CONFIG_FILES(tests/golden/hid_gcode4/Makefile)
1311 AC_CONFIG_FILES(tests/golden/hid_gcode5/Makefile)
1312 AC_CONFIG_FILES(tests/golden/hid_gcode6/Makefile)
1313 AC_CONFIG_FILES(tests/golden/hid_gcode7/Makefile)
1314 AC_CONFIG_FILES(tests/golden/hid_gcode8/Makefile)
1315 AC_CONFIG_FILES(tests/golden/hid_gcode9/Makefile)
1316 AC_CONFIG_FILES(tests/golden/hid_gcode10/Makefile)
1317 AC_CONFIG_FILES(tests/golden/hid_gcode11/Makefile)
1318 AC_CONFIG_FILES(tests/golden/hid_gerber1/Makefile)
1319 AC_CONFIG_FILES(tests/golden/hid_gerber2/Makefile)
1320 AC_CONFIG_FILES(tests/golden/hid_gerber3/Makefile)
1321 AC_CONFIG_FILES(tests/golden/hid_png1/Makefile)
1322 AC_CONFIG_FILES(tests/golden/hid_png2/Makefile)
1323 AC_CONFIG_FILES(tests/golden/hid_png3/Makefile)
1324 AC_CONFIG_FILES(tests/Makefile)
1326 dnl GTS 0.7.6 - http://gts.sourceforge.net/
1327 AC_CONFIG_FILES(gts/Makefile)
1329 dnl win32 build scripts
1330 AC_CONFIG_FILES(w32/Makefile)
1332 AC_OUTPUT
1334 with_gui=`echo $with_gui`
1335 with_printer=`echo $with_printer`
1336 with_exporters=`echo $with_exporters | sed 's/,/ /g'`
1338 expandedXDGDATADIR=`eval "echo $XDGDATADIR"`
1339 expandedKDEDATADIR=`eval "echo $KDEDATADIR"`
1341 AC_MSG_RESULT([
1342 ** Configuration summary for $PACKAGE $VERSION:
1344    GUI:                      $with_gui
1345    Printer:                  $with_printer
1346    Exporters:                $with_exporters
1347    Coordinate type:          $COORD_TYPE
1348    Source tree distribution: $pcb_sources
1349    Build documentation:      $docs_yesno
1350    Build toporouter:         $enable_toporouter
1351    Enable toporouter output: $enable_toporouter_output
1352    xdg data directory:       $expandedXDGDATADIR
1353    KDE data directory:       $expandedKDEDATADIR
1354    dmalloc debugging:        $with_dmalloc
1355    ElectricFence debugging:  $with_efence
1357    Cross Compiling:          $cross_compiling
1358    CC:                       $CC
1359    CXX:                      $CXX
1360    CPPFLAGS:                 $CPPFLAGS
1361    CFLAGS:                   $CFLAGS
1362    CXXFLAGS:                 $CXXFLAGS
1363    LIBS:                     $LIBS
1364    PCB:                      $PCB