1 dnl Process this file with autoconf to produce a configure script.
3 AC_INIT([pcb], [1.99z])
4 AC_CONFIG_SRCDIR([src/draw.c])
6 AM_INIT_AUTOMAKE([1.9])
8 AM_CONFIG_HEADER([config.h])
10 ##########################################################################
12 # Try to figure out if we are building from git sources.
13 # If we are then unless building of the documentation has
14 # been disabled then just require the user have all the right
15 # tools. Users building from a tarball won't need latex, makeinfo,
16 # etc. but if you're already downloading development sources, then
17 # it is not unreasonable to require development tools. What motivated
18 # this is that using maintainer mode proved to cause regular confusion.
20 AC_MSG_CHECKING([if you are building from a git checkout])
22 if test -f $srcdir/.gitignore ; then
28 AM_CONDITIONAL(GIT_VERSION, test x$pcb_git_version = xyes)
30 AC_MSG_CHECKING([if you are building from a anoncvs checkout])
32 if test -f $srcdir/CVS/Root ; then
38 AM_CONDITIONAL(CVS_VERSION, test x$pcb_cvs_version = xyes)
39 AM_CONDITIONAL(GIT_OR_CVS_VERSION, test x$pcb_git_version = xyes -o x$pcb_cvs_version = xyes)
41 ##########################################################################
43 # See if we are supposed to build the docs
47 AC_MSG_CHECKING([if the documentation should be built])
49 [ --enable-doc Build and install the documentation [[default=yes]]],
51 if test "X$enable_doc" = "Xno" ; then
69 AC_MSG_CHECKING([if maintainer mode is required])
70 if test "$docs_yesno" = "yes" -a "$pcb_git_version" = "yes" ; then
71 AC_MSG_RESULT([yes -- the documentation build is enabled and your sources are from git])
72 enable_maintainer_mode=yes
80 dnl determine host type
82 AC_MSG_CHECKING(for windows)
83 PCB_PATH_DELIMETER=":"
84 PCB_DIR_SEPARATOR_S="/"
85 PCB_DIR_SEPARATOR_C='/'
88 CFLAGS="$CFLAGS ${CYGWIN_CFLAGS}"
89 CPPFLAGS="$CPPFLAGS ${CYGWIN_CPPFLAGS}"
94 CFLAGS="$CFLAGS ${MINGW_CFLAGS:--mms-bitfields -mwindows}"
95 CPPFLAGS="$CPPFLAGS ${MINGW_CPPFLAGS:--mms-bitfields -mwindows}"
103 AC_MSG_RESULT($WIN32)
105 AM_CONDITIONAL(WIN32, test x$WIN32 = xyes)
106 if test "x$WIN32" = "xyes" ; then
107 PCB_PATH_DELIMETER=";"
108 PCB_DIR_SEPARATOR_S="\\\\"
109 PCB_DIR_SEPARATOR_C='\\'
112 AC_DEFINE_UNQUOTED(PCB_DIR_SEPARATOR_C,'$PCB_DIR_SEPARATOR_C',[Directory separator char])
113 AC_DEFINE_UNQUOTED(PCB_DIR_SEPARATOR_S,"$PCB_DIR_SEPARATOR_S",[Directory separator string])
114 AC_DEFINE_UNQUOTED(PCB_PATH_DELIMETER,"$PCB_PATH_DELIMETER",[Search path separator string])
117 dnl Checks for programs.
120 if test "x$WIN32" = "xyes" ; then
121 AC_CHECK_TOOL(WINDRES, windres, [no])
122 if test "$WINDRES" = "no" ; then
123 AC_MSG_ERROR([*** Could not find an implementation of windres in your PATH.])
128 GETTEXT_PACKAGE=$PACKAGE
129 AH_TEMPLATE([GETTEXT_PACKAGE], [Name of this program's gettext domain])
130 AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE], ["$GETTEXT_PACKAGE"])
131 AC_SUBST(GETTEXT_PACKAGE)
133 AM_GNU_GETTEXT_VERSION([0.14])
135 IT_PROG_INTLTOOL([0.35.0])
144 AC_PATH_PROG(LEX_PATH, $LEX, [notfound])
145 if test "$LEX_PATH" = "notfound" ; then
146 AC_MSG_ERROR([Couldn't find a usable lex program.
147 Please install flex which is available from
148 ftp://ftp.gnu.org/pub/non-gnu/flex/
154 AC_PATH_PROG(YACC_PATH, $YACC, [notfound])
155 if test "$YACC_PATH" = "notfound" ; then
156 AC_MSG_ERROR([Couldn't find a usable yacc program.
157 Please install bison which is available from
158 ftp://ftp.gnu.org/pub/gnu/bison/
166 # Used for building the icons
168 AC_PATH_PROG(XPMTOPPM, xpmtoppm, notfound)
169 AC_PATH_PROG(PPMTOWINICON, ppmtowinicon, notfound)
170 AC_PATH_PROG(CONVERT, convert, notfound)
172 ##########################################################################
175 if test "X$docs_yesno" = "Xyes" -a "X$pcb_git_version" = "Xyes" ; then
176 AC_PATH_PROG(MKINFO, makeinfo, no)
177 if test "X$MKINFO" != "Xno"; then
178 AC_MSG_CHECKING([for GNU makeinfo version >= 4.6])
179 v=`$MKINFO --version | grep "GNU texinfo"`
180 if test $? -ne 0; then
181 AC_MSG_RESULT([non-GNU])
185 if test "X$MKINFO" != "Xno"; then
186 vmajor=`echo "$v" | sed 's/.* \([[0-9]]*\)\.\([[0-9]]*\)$/\1/'`
187 vminor=`echo "$v" | sed 's/.* \([[0-9]]*\)\.\([[0-9]]*\)$/\2/'`
188 AC_MSG_RESULT([$vmajor.$vminor])
189 if test "$vmajor" -lt 4 \
190 || (test "$vmajor" -eq 4 && test "$vminor" -lt 6); then
194 if test "X$MKINFO" = "Xno"; then
195 AC_MSG_ERROR([You have requested a build
196 of the documentation. For this to work, you must have version 4.6 or newer of
197 the GNU texinfo package. You seem to have
201 Please update to a newer version of texinfo or disable building of
202 the documentation with --disable-doc
206 AC_PATH_PROG(TEXI2DVI, texi2dvi, no)
207 if test "X$TEXI2DVI" = "Xno"; then
208 AC_MSG_ERROR([You have requested a build
209 of the documentation. For this to work, you must have the texi2dvi program
210 installed. Alternatively, you can disable building the documentation with
215 AC_PATH_PROG(PERL, perl, notfound)
216 if test "X$PERL" = "Xnotfound"; then
217 AC_MSG_ERROR([You have requested a build
218 of the documentation. For this to work, you must have perl installed.
219 Alternatively, you can disable building the documentation with
225 ##########################################################################
229 # FIXME: for now, only try to add -rdynamic if we're using gcc. We really
230 # need to figure out what the correct test is here. In the mean time, this
231 # should let things build with SunPRO again.
232 if test "x$GCC" = "xyes"; then
233 AC_MSG_CHECKING([If the compiler accepts -rdynamic])
234 old_LDFLAGS="$LDFLAGS"
235 LDFLAGS="$LDFLAGS -rdynamic"
236 AC_LINK_IFELSE([int main(){}],
237 [AC_MSG_RESULT([yes])],
238 [LDFLAGS="$old_LDFLAGS"
243 # ------------- HID config -------------------
250 for hid in `cd $srcdir/src/hid; echo *`; do
251 F=$srcdir/src/hid/$hid/hid.conf
257 gui ) hid_guis="$hid_guis $hid" ;;
258 printer ) hid_printers="$hid_printers $hid" ;;
259 export ) hid_exporters="$hid_exporters $hid" ;;
260 always ) hid_always="$hid_always $hid" ;;
265 AC_MSG_CHECKING([for which gui to use])
267 [ --with-gui= Specify the GUI to use: batch gtk lesstif [[default=gtk]]],
271 AC_MSG_RESULT([$with_gui])
272 case " $hid_guis no none " in
273 *\ $with_gui\ * ) HIDLIST="$with_gui" ;;
274 * ) AC_MSG_ERROR([$with_gui is not a valid gui]) ;;
277 if test x"$with_gui" = x"none" -o x"$with_gui" = x"no"
282 AC_MSG_CHECKING([whether to enable toporouter])
283 AC_ARG_ENABLE([toporouter],
284 [AS_HELP_STRING([--enable-toporouter], [build toporouter [default=yes]]) ]
286 AS_CASE(["x$enable_toporouter"],[xyes | xno],,
287 [enable_toporouter=yes
290 AC_MSG_RESULT([$enable_toporouter])
291 AM_CONDITIONAL([WITH_TOPOROUTER], test $enable_toporouter != no)
293 AC_MSG_CHECKING([whether to enable toporouter output])
294 AC_ARG_ENABLE([toporouter-output],
295 [AS_HELP_STRING([--enable-toporouter-output], [enable toporouter graphical output [default=no]]) ]
297 AS_CASE(["z$enable_toporouter_output"],[zyes | zno],,
298 [enable_toporouter_output=no]
300 AC_MSG_RESULT([$enable_toporouter_output])
301 AS_CASE([$enable_toporouter_output],[yes],
303 topo_output_enabled=1
306 topo_output_enabled=0
309 AC_DEFINE_UNQUOTED([TOPO_OUTPUT_ENABLED], [$topo_output_enabled],
310 [Define to 1 to enable toporouter graphical output]
313 PKG_PROG_PKG_CONFIG()
315 if test "x$enable_toporouter_output" = "xyes"; then
316 PKG_CHECK_MODULES(CAIRO, cairo,,
317 [AC_MSG_ERROR([Cannot find cairo, needed by the toporouter
318 Please review the following errors:
323 AC_MSG_CHECKING([for whether to use DBUS])
324 AC_ARG_ENABLE([dbus],
325 [ --enable-dbus Enable DBUS IPC],
328 AC_MSG_RESULT([$enable_dbus])
329 AM_CONDITIONAL(WITH_DBUS, test x$enable_dbus = xyes)
331 if test "x$enable_dbus" = "xyes"; then
332 case " $with_gui " in
335 * ) AC_MSG_ERROR([DBUS enabled but only works with a mainloop capable GUI HID.
336 Either do not use --enable-dbus or enable the gtk or lesstif GUI HID.])
339 PKG_CHECK_MODULES(DBUS, dbus-1 >= 0.61,
341 LIBS="$LIBS $DBUS_LIBS"
342 AC_CHECK_FUNCS(dbus_watch_get_unix_fd)
343 LIBS="$saved_LIBS" ],
344 [AC_MSG_ERROR([Cannot find dbus-1 >= 0.61, install it and rerun ./configure
345 Please review the following errors:
348 DBUS_VERSION=`$PKG_CONFIG dbus-1 --modversion`
350 AC_DEFINE([HAVE_DBUS], 1,
351 [Define to 1 if DBUS IPC is to be compiled in])
355 AC_MSG_CHECKING([for which printer to use])
356 AC_ARG_WITH([printer],
357 [ --with-printer= Specify the printer: lpr [[default=lpr]]],
358 [],[with_printer=lpr])
359 AC_MSG_RESULT([$with_printer])
360 case " $hid_printers " in
361 *\ $with_printer\ * )
362 HIDLIST="$HIDLIST $with_printer"
364 * ) AC_MSG_ERROR([$with_printer is not a valid printer]) ;;
367 AC_MSG_CHECKING([for which exporters to use])
368 AC_ARG_WITH([exporters],
369 [ --with-exporters= Enable export devices: bom gerber nelma png ps [[default=bom gerber nelma png ps]]],
370 [],[with_exporters=$hid_exporters])
371 AC_MSG_RESULT([$with_exporters])
372 for e in `echo $with_exporters | sed 's/,/ /g'`; do
373 case " $hid_exporters " in
375 HIDLIST="$HIDLIST $e"
377 * ) AC_MSG_ERROR([$e is not a valid exporter]) ;;
381 if test "X$enable_jpeg" = "Xno" -a "X$enable_gif" = "Xno" -a "X$enable_png" = "Xno" ; then
382 case " ${HIDLIST} " in
384 AC_MSG_ERROR([you have requested the png HID but turned off all output
385 formats! If you do not want gif/jpeg/png output, use --with-exporters to list
386 which exporters you want and do not list png there.])
394 for hid in $HIDLIST; do
395 F=$srcdir/src/hid/$hid/hid.conf
397 echo checking $hid depedencies
401 if test "X`echo $HIDLIST | grep $dep`" = "X"; then
402 AC_MSG_ERROR([you have requested the $hid HID but not the $dep HID, which it depends on])
408 for e in $HIDLIST; do
409 HIDLIBS="$HIDLIBS lib$e.a"
415 # ------------- end HID config -------------------
417 ######################################################################
419 # desktop integration
422 AC_PATH_PROG(SETENV, env, [])
423 AC_PATH_PROG(GTK_UPDATE_ICON_CACHE_BIN, gtk-update-icon-path, [true])
425 # Change default location for XDG files (MIME and Icons)
426 AC_ARG_WITH(xdgdatadir, [ --with-xdgdatadir=path Change where the theme icons
427 and mime registrations are installed [[DATADIR]]], [opt_xdgdatadir=$withval])
429 # Change default location for KDE data files (KDE MIME registrations)
430 AC_ARG_WITH(kdedatadir, [ --with-kdedatadir=path Change where the KDE mime reg
431 istrations are installed [[DATADIR]]], [opt_kdedatadir=$withval])
433 if test x$opt_xdgdatadir = x; then
434 # path was not specified with --with-xdgdatadir
435 XDGDATADIR='${datadir}'
437 # path WAS specified with --with-xdgdatadir
438 XDGDATADIR="$opt_xdgdatadir"
442 if test x$opt_kdedatadir = x; then
443 # path was not specified with --with-kdedatadir
444 KDEDATADIR='${datadir}'
446 # path WAS specified with --with-kdedatadir
447 KDEDATADIR="$opt_kdedatadir"
451 AC_ARG_ENABLE(update-desktop-database,
452 AC_HELP_STRING([--disable-update-desktop-database],
453 [do not update desktop database after installation]),,
454 enable_update_desktop_database=yes)
456 AM_CONDITIONAL(ENABLE_UPDATE_DESKTOP_DATABASE, test x$enable_update_desktop_database = xyes)
458 if test x$enable_update_desktop_database = xyes ; then
459 AC_PATH_PROG(UPDATE_DESKTOP_DATABASE, [update-desktop-database], no)
460 if test $UPDATE_DESKTOP_DATABASE = no; then
461 AC_MSG_ERROR([Cannot find update-desktop-database, make sure it is installed and in your PATH, or configure with --disable-update-desktop-database])
465 AC_ARG_ENABLE(update-mime-database,
466 AC_HELP_STRING([--disable-update-mime-database],
467 [do not update mime database after installation]),,
468 enable_update_mime_database=yes)
470 AM_CONDITIONAL(ENABLE_UPDATE_MIME_DATABASE, test x$enable_update_mime_database = xyes)
472 if test x$enable_update_mime_database = xyes ; then
473 AC_PATH_PROG(UPDATE_MIME_DATABASE, [update-mime-database], no)
474 if test $UPDATE_MIME_DATABASE = no; then
475 AC_MSG_ERROR([Cannot find update-mime-database, make sure it is installed and in your PATH, or configure with --disable-update-mime-database])
480 ######################################################################
482 AC_PATH_PROGS(M4, gm4 m4, [none])
483 if test "X$M4" = "Xnone" ; then
484 AC_MSG_ERROR([Did not find a m4 executible. You need to make sure
485 that m4 is installed on your system and that m4 is in your path])
487 AC_MSG_CHECKING([if $M4 has the division involving negative numbers bug])
488 pcb_m4_r=`echo "eval(-2/2)" | $M4`
489 if test "$pcb_m4_r" != "-1" ; then
491 AC_MSG_ERROR([It appears that $M4 has a bug involving division
492 with negative numbers. In particular it just returned the result that
493 -2/2 = $pcb_m4_r instead of -1. This is a known bug in GNU m4-1.4.9. Please
494 install a non-broken m4.])
500 AC_PATH_PROGS(WISH, wish wish83 wish8.3 wish80 wish8.0 cygwish83 cygwish80,[none])
501 if test "X$WISH" = "Xnone" ; then
502 AC_MSG_ERROR([Did not find the wish executible. You need to make sure
503 that tcl is installed on your system and that wish is in your path])
506 AC_DEFINE_UNQUOTED(M4,$M4,[m4 executible])
509 AC_DEFINE_UNQUOTED(GNUM4,"$M4",[m4 program used by pcb])
511 AC_PATH_PROG(LATEX, latex, notfound)
512 AM_CONDITIONAL(MISSING_LATEX, test x$LATEX = xnotfound)
514 AC_PATH_PROG(PDFLATEX, pdflatex, notfound)
515 AM_CONDITIONAL(MISSING_PDFLATEX, test x$PDFLATEX = xnotfound)
517 AC_PATH_PROG(DVIPS, dvips, notfound)
518 AM_CONDITIONAL(MISSING_DVIPS, test x$DVIPS = xnotfound)
520 AC_PATH_PROG(TEXI2DVI, texi2dvi, notfound)
521 AM_CONDITIONAL(MISSING_TEXI2DVI, test x$TEXI2DVI = xnotfound)
523 AC_PATH_PROG(PS2PDF, ps2pdf, notfound)
524 AM_CONDITIONAL(MISSING_PS2PDF, test x$PS2PDF = xnotfound)
526 # used to build some of the getting started guide
527 AC_PATH_PROG(GSCHEM, gschem, notfound)
528 AM_CONDITIONAL(MISSING_GSCHEM, test x$GSCHEM = xnotfound)
530 if test "X$docs_yesno" = "Xyes" -a "X$pcb_git_version" = "Xyes" ; then
531 if test "$LATEX" = "notfound" -o "$PDFLATEX" = "notfound" -o "$DVIPS" = "notfound" -o "$TEXI2DVI" = "notfound" -o "$PS2PDF" = "notfound" ; then
532 AC_MSG_ERROR([It appears that you are building from a source tree obtained
533 via git but you do not have the required tools installed to build the documentation. Here
534 is a list of tools and the detected values:
542 Either make sure these tools are installed or disable building and installing the documentation
543 by using the --disable-doc configure option.
548 ############################################################################
550 # These checks are for tools used by the testsuite. It will not be fatal
551 # if these are missing because this is primarily for developer use. It is
552 # possible that we might add some --enable flag in the future that forces
553 # full tools for development work.
555 # Check for ImageMagick tools used by the testsuite
556 AC_PATH_PROG(IM_ANIMATE, animate, notfound)
557 AC_PATH_PROG(IM_COMPARE, compare, notfound)
558 AC_PATH_PROG(IM_COMPOSITE, composite, notfound)
559 AC_PATH_PROG(IM_CONVERT, convert, notfound)
560 AC_PATH_PROG(IM_DISPLAY, display, notfound)
561 AC_PATH_PROG(IM_MONTAGE, montage, notfound)
563 test "${IM_ANIMATE}" != "notfound" || missing_magick="${missing_magick} animate"
564 test "${IM_COMPARE}" != "notfound" || missing_magick="${missing_magick} compare"
565 test "${IM_COMPOSITE}" != "notfound" || missing_magick="${missing_magick} composite"
566 test "${IM_CONVERT}" != "notfound" || missing_magick="${missing_magick} convert"
567 test "${IM_DISPLAY}" != "notfound" || missing_magick="${missing_magick} display"
568 test "${IM_MONTAGE}" != "notfound" || missing_magick="${missing_magick} montage"
570 AC_MSG_CHECKING([if all ImageMagick tools needed for the testsuite were found])
571 if test "X${missing_magick}" != "X" ; then
572 AC_MSG_RESULT([no. The testsuite will be disabled because the following
573 tools from the ImageMagick suite were not found:
575 No loss in pcb functionality should be experienced, you just will not
576 be able to run the full regression testsuite.
586 test $have_magick = yes || have_test_tools=no
588 # the RS274-X export HID is partially checked by looking at the result with
590 AC_PATH_PROG(GERBV, gerbv, notfound)
591 test $GERBV != notfound || have_test_tools=no
594 AM_CONDITIONAL(HAVE_TEST_TOOLS, test x$have_test_tools = xyes)
595 AC_MSG_CHECKING([if all the requried testsuite tools were found])
596 if test x$have_test_tools = xyes ; then
599 AC_MSG_RESULT([no -- the testsuite will be disabled])
604 ############################################################################
607 dnl Checks for libraries.
608 AC_CHECK_LIB(m, sqrt)
609 AC_CHECK_LIB(dl, dlopen)
610 AC_CHECK_LIB(xnet, gethostbyname)
611 AC_CHECK_LIB(fl, yywrap)
612 AC_CHECK_FUNCS(strerror)
613 AC_CHECK_FUNCS(regcomp re_comp)
614 AC_CHECK_FUNCS(logf expf rint)
615 AC_CHECK_FUNCS(vsnprintf)
616 AC_CHECK_FUNCS(getpwuid gethostname getcwd)
617 AC_CHECK_FUNCS(random)
620 # normally used for all file i/o
621 AC_CHECK_FUNCS(popen)
624 AC_CHECK_FUNCS(realpath canonicalize_file_name)
625 libiberty_NEED_DECLARATION(canonicalize_file_name)
628 AC_CHECK_HEADERS(limits.h locale.h string.h sys/types.h regex.h pwd.h)
629 AC_CHECK_HEADERS(sys/socket.h netinet/in.h netdb.h sys/param.h sys/times.h)
630 AC_CHECK_HEADERS(dlfcn.h)
632 if test "x${WIN32}" = "xyes" ; then
633 AC_CHECK_HEADERS(windows.h)
636 PKG_CHECK_MODULES(GLIB, glib-2.0, ,
637 [AC_MSG_RESULT([Note: cannot find glib-2.0.
638 You may want to review the following errors:
642 for e in $HIDLIST; do
646 CPPFLAGS="$CFLAGS $X_CFLAGS"
647 AC_CHECK_LIB(X11, XOpenDisplay, , , $X_LIBS)
648 AC_CHECK_LIB(ICE, main, , , $X_LIBS)
649 AC_CHECK_LIB(SM, main, , , $X_LIBS)
650 AC_CHECK_LIB(Xext, main, , , $X_LIBS)
651 AC_CHECK_LIB(Xt, XtOpenDisplay, , , $X_LIBS)
652 AC_CHECK_LIB(Xmu, main, , , $X_LIBS)
653 AC_CHECK_LIB(Xpm, main, , , $X_LIBS)
654 AC_CHECK_LIB(Xm, XmCreateMainWindow, , , $X_LIBS)
655 case $ac_cv_lib_Xm_XmCreateMainWindow in
657 AC_MSG_ERROR([You don't seem to have the Lesstif development environment installed.])
661 AC_CHECK_HEADERS(Xm/Xm.h)
662 case $ac_cv_header_Xm_Xm_h in
664 AC_MSG_ERROR([You don't seem to have the Lesstif development environment installed.])
671 # Check for pkg-config
672 AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
673 if test "$PKG_CONFIG" = "no"; then
674 AC_MSG_ERROR([Cannot find pkg-config, make sure it is installed and in your PATH])
677 PKG_CHECK_MODULES(GTK, gtk+-2.0 >= 2.4.0, ,
678 [AC_MSG_ERROR([Cannot find gtk+ >= 2.4.0, install it and rerun ./configure
679 Please review the following errors:
682 GTK_VERSION=`$PKG_CONFIG gtk+-2.0 --modversion`
684 # if we are building for gtk >= 2.8.0, we can use gdk_display_warp_pointer()
685 # otherwise we need XWarpPointer and we'll pull in the required headers with
686 # gdk/gdkx.h and we'll need to link with X11
687 if ! $PKG_CONFIG gtk+-2.0 --atleast-version=2.8.0 ; then
688 CPPFLAGS="$CFLAGS $GTK_CFLAGS"
689 AC_CHECK_HEADERS([gdk/gdkx.h])
692 GLIB_VERSION=`$PKG_CONFIG glib-2.0 --modversion`
696 # Check for gdlib-config for gd (www.boutell.com/gd)
697 AC_PATH_PROG(GDLIB_CONFIG, gdlib-config, no)
698 if test "$GDLIB_CONFIG" = "no"; then
699 AC_MSG_RESULT([Cannot find gdlib-config.
700 Make sure it is installed and in your PATH.
701 gdlib-config is part of the GD library available from www.boutell.com/gd.
702 This is needed for the png HID. I will look for libgd anyway and maybe
705 if test "$WIN32" != "yes" ; then
706 AC_CHECK_LIB(gd,main,,
707 AC_MSG_ERROR([You have requested the nelma and/or png HID but -lgd could not be found]))
709 AC_CHECK_LIB(bgd,main,,
710 AC_MSG_ERROR([You have requested the nelma and/or png HID but -lbgd could not be found]))
713 if test "$WIN32" = "yes" ; then
718 AC_MSG_CHECKING([for libgd cflags])
719 GD_CFLAGS="`$GDLIB_CONFIG --cflags`"
720 AC_MSG_RESULT([$GD_CFLAGS])
721 AC_MSG_CHECKING([for libgd libs])
722 GD_LIBS="`$GDLIB_CONFIG --ldflags` `$GDLIB_CONFIG --libs` -l${GD}"
723 AC_MSG_RESULT([$GD_LIBS])
726 # since some linux systems evidently install gdlib-config but fail to
727 # install the headers (nice), check for the header too and fail if it
729 CFLAGS="$CFLAGS $GD_CFLAGS"
730 CPPFLAGS="$CPPFLAGS $GD_CFLAGS"
731 AC_CHECK_HEADERS(gd.h)
732 case $ac_cv_header_gd_h in
735 You evidentally do not have a complete installation of the GD library available from www.boutell.com/gd.
736 This is needed for the nelma and/or png HID.
742 # Some versions of gd (prior to the expiration of the
743 # patent related to gif compression) do not support
744 # gif output. Check for that here.
746 LIBS="$save_LIBS $GD_LIBS $X_LIBS"
748 AC_MSG_CHECKING([if GIF output from the png HID is desired])
750 [ --disable-gif Disable support for gif output when the png HID is used [[default=include gif support]]],
752 if test "X$enable_gif" != "Xno" ; then
764 if test "X$with_gif" = "Xyes" ; then
765 AC_CHECK_FUNCS(gdImageGif)
766 if test "$ac_cv_func_gdImageGif" != "yes"; then
767 AC_MSG_ERROR([Your gd installation does not appear to include gif support.
768 You may need to update your installation of gd or disable
769 gif export with --disable-gif])
773 AC_MSG_CHECKING([if JPEG output from the png HID is desired])
774 AC_ARG_ENABLE([jpeg],
775 [ --disable-jpeg Disable support for JPEG output when the png HID is used [[default=include JPEG support]]],
777 if test "X$enable_jpeg" != "Xno" ; then
789 if test "X$with_jpeg" = "Xyes" ; then
790 AC_CHECK_FUNCS(gdImageJpeg)
791 if test "$ac_cv_func_gdImageJpeg" != "yes"; then
792 AC_MSG_ERROR([Your gd installation does not appear to include JPEG support.
793 You may need to update your installation of gd or disable
794 JPEG export with --disable-jpeg])
799 AC_MSG_CHECKING([if PNG output from the png HID is desired])
801 [ --disable-png Disable support for PNG output when the png HID is used [[default=include PNG support]]],
803 if test "X$enable_png" != "Xno" ; then
815 if test "X$with_png" = "Xyes" ; then
816 AC_CHECK_FUNCS(gdImagePng)
817 if test "$ac_cv_func_gdImagePng" != "yes"; then
818 AC_MSG_ERROR([Your gd installation does not appear to include PNG support.
819 You may need to update your installation of gd or disable
820 PNG export with --disable-png])
830 AM_CONDITIONAL(PNG, test x$with_png = xyes)
831 AM_CONDITIONAL(GIF, test x$with_gif = xyes)
833 # ------------- check if png previews should be built for pcblib-newlib
834 AC_MSG_CHECKING([if the m4lib to newlib export should create png previews])
837 [ --enable-m4lib-png Enable creating png previews for the m4 library],
838 [],[enable_m4lib_png=no])
839 AC_MSG_RESULT([$enable_m4lib_png])
840 AM_CONDITIONAL(PNG_PREVIEW, test x$enable_m4lib_png = xyes)
842 if test "X$cross_compiling" = "Xyes" ; then
843 # we are cross compiling so we will need a build host binary for pcb
844 AC_PATH_PROG(PCB, [pcb], [notfound])
846 PCB="\${top_builddir}/src/pcb"
850 # now make see how essential it was that we have a pcb executable for the build
852 if test "X$pcb_git_version" = "Xyes" ; then
853 if test "X$docs_yesno" = "Xyes" -o "X$enable_m4lib_png" = "Xyes" ; then
854 if test "$PCB" = "notfound" ; then
855 AC_MSG_ERROR([You have selected a build with m4lib png
856 previews enabled and/or with building the documentation enabled but you also
857 appear to be cross-compiling. For this to work, you must have a pcb installed that
858 can run on this machine (the build machine) because it is needed for generating
859 library footprint png previews as well as some of the figures in the documentation.
860 If you wish to skip building the documentation and the footprint previews then add
861 --disable-doc --disable-m4lib-png
862 This will allow your cross build to work.])
867 # ------------- Xrender -------------------
869 AC_CHECK_LIB(Xrender,XRenderQueryExtension,have_xrender=yes,have_xrender=no,$X_LIBS)
871 AC_ARG_ENABLE([xrender],
872 [ --disable-xrender Compile and link with Xrender [default=yes]])
873 case "$have_xrender:$enable_xrender" in
877 X_LIBS="-lXrender $X_LIBS"
878 AC_DEFINE([HAVE_XRENDER], 1,
879 [Define to 1 if Xrender is available])
883 # ------------- dmalloc -------------------
886 AC_MSG_CHECKING([if dmalloc debugging should be enabled])
887 AC_ARG_ENABLE([dmalloc],
888 [ --enable-dmalloc Compile and link with dmalloc for malloc debugging [default=no]],
890 if test "X$enable_dmalloc" != "Xno" ; then
892 AC_CHECK_HEADER(dmalloc.h,,
893 AC_MSG_ERROR([You have requested dmalloc debugging but dmalloc.h could not be found]))
894 AC_CHECK_LIB(dmalloc,main,,
895 AC_MSG_ERROR([You have requested dmalloc debugging but -ldmalloc could not be found]))
896 DMALLOC_LIBS="-ldmalloc"
908 # ------------- ElectricFence -------------------
909 dnl ElectricFence checks
911 AC_MSG_CHECKING([if ElectricFence debugging should be enabled])
912 AC_ARG_ENABLE([efence],
913 [ --enable-efence Link with ElectricFence for malloc debugging [default=no]],
915 if test "X$enable_efence" != "Xno" ; then
917 AC_CHECK_LIB(efence,main,,
918 AC_MSG_ERROR([You have requested ElectricFence debugging but -lefence could not be found]))
928 # ------------- Enable Debug code -------------------
929 AC_MSG_CHECKING([for whether to enable debugging code])
930 AC_ARG_ENABLE([debug],
931 [ --enable-debug Enable debugging code],
932 [],[enable_debug=no])
934 AC_MSG_RESULT([$enable_debug])
935 AM_CONDITIONAL(DEBUG_BUILD, test x$enable_debug = xyes)
938 # ------------- Complete set of CFLAGS and LIBS -------------------
940 CFLAGS="$CFLAGS $X_CFLAGS $DBUS_CFLAGS $GLIB_CFLAGS $GTK_CFLAGS $CAIRO_CFLAGS"
941 LIBS="$LIBS $XM_LIBS $DBUS_LIBS $X_LIBS $GLIB_LIBS $GTK_LIBS $DMALLOC_LIBS $GD_LIBS $INTLLIBS $CAIRO_LIBS"
944 # if we have gcc then add -Wall
945 if test "x$GCC" = "xyes"; then
946 # see about adding some extra checks if the compiler takes them
947 for flag in -Wall -Wdeclaration-after-statement ; do
948 case " ${CFLAGS} " in
950 # flag is already present
953 AC_MSG_CHECKING([if the compiler accepts ${flag}])
954 ac_save_CFLAGS="$CFLAGS"
955 CFLAGS="$CFLAGS ${flag}"
956 AC_COMPILE_IFELSE([AC_LANG_PROGRAM()],
957 [AC_MSG_RESULT([yes])],
959 CFLAGS="$ac_save_CFLAGS"
968 FONTFILENAME=${FONTFILENAME:-"default_font"}
969 AC_SUBST(FONTFILENAME)
970 AC_DEFINE_UNQUOTED(FONTFILENAME,"$FONTFILENAME",[File for default font])
972 # standard autoconf variables
973 CPPFLAGS="$CPPFLAGS -DPREFIXDIR=\\\"\${prefix}\\\""
974 CPPFLAGS="$CPPFLAGS -DBINDIR=\\\"\${bindir}\\\""
975 CPPFLAGS="$CPPFLAGS -DHOST=\\\"\${host}\\\""
977 # directory for old-style library and for fonts
978 PCBLIBDIR=${datadir}/pcb
980 #AC_DEFINE_UNQUOTED(PCBLIBDIR,"$PCBLIBDIR",[Library directory])
981 CPPFLAGS="$CPPFLAGS -DPCBLIBDIR=\\\"$PCBLIBDIR\\\""
983 # name for old-style library
984 LIBRARYFILENAME=pcblib
985 AC_SUBST(LIBRARYFILENAME)
986 AC_DEFINE_UNQUOTED(LIBRARYFILENAME,"$LIBRARYFILENAME",[library file name])
989 # directory for new library
990 PCBTREEDIR=${datadir}/pcb/newlib
991 PCBTREEPATH=${PCBTREEDIR}:${PCBLIBDIR}/pcblib-newlib
992 PCBTREEDIR=${PCBTREEDIR:-"$PCBTREEDIR"}
994 AC_SUBST(PCBTREEPATH)
995 #AC_DEFINE_UNQUOTED(PCBTREEDIR,"$PCBLIB",[top directory for new style pcb library])
996 CPPFLAGS="$CPPFLAGS -DPCBTREEDIR=\\\"$PCBTREEDIR\\\""
997 CPPFLAGS="$CPPFLAGS -DPCBTREEPATH=\\\"$PCBTREEPATH\\\""
999 # Figure out relative paths
1000 AC_MSG_CHECKING([for the bindir to pcblibdir relative path])
1001 adl_COMPUTE_RELATIVE_PATHS([bindir:PCBLIBDIR:bindir_to_pcblibdir])
1002 adl_NORMALIZE_PATH([bindir_to_pcblibdir], [$PCB_DIR_SEPARATOR_S])
1003 AC_MSG_RESULT([$bindir_to_pcblibdir])
1004 AC_DEFINE_UNQUOTED(BINDIR_TO_PCBLIBDIR, "$bindir_to_pcblibdir", [Relative path from bindir to pcblibdir])
1006 AC_MSG_CHECKING([for the bindir to pcbtreedir relative path])
1007 adl_COMPUTE_RELATIVE_PATHS([bindir:PCBTREEDIR:bindir_to_pcbtreedir])
1008 adl_NORMALIZE_PATH([bindir_to_pcbtreedir], [$PCB_DIR_SEPARATOR_S])
1009 AC_MSG_RESULT([$bindir_to_pcbtreedir])
1010 AC_DEFINE_UNQUOTED(BINDIR_TO_PCBTREEDIR, "$bindir_to_pcbtreedir", [Relative path from bindir to pcbtreedir])
1013 AC_MSG_CHECKING([for the bindir to exec_prefix relative path])
1014 adl_COMPUTE_RELATIVE_PATHS([bindir:exec_prefix:bindir_to_execprefix])
1015 adl_NORMALIZE_PATH([bindir_to_execprefix], [$PCB_DIR_SEPARATOR_S])
1016 AC_MSG_RESULT([$bindir_to_execprefix])
1017 AC_DEFINE_UNQUOTED(BINDIR_TO_EXECPREFIX, "$bindir_to_execprefix", [Relative path from bindir to exec_prefix])
1020 BTNMOD=${BTNMOD:-"Mod1"}
1024 for dir in src lib newlib doc example tools tutorial README_FILES
1026 test -d $dir/. && TOPDIRS="$TOPDIRS $dir"
1030 AC_CONFIG_FILES(Makefile data/Makefile intl/Makefile po/Makefile.in)
1032 if test -d $srcdir/README_FILES; then
1033 AC_CONFIG_FILES(README_FILES/Makefile)
1035 if test -d $srcdir/doc; then
1036 AC_CONFIG_FILES(doc/Makefile)
1038 if test -d $srcdir/doc/gs; then
1039 AC_CONFIG_FILES(doc/gs/Makefile)
1040 AC_CONFIG_FILES(doc/gs/gafrc)
1041 AC_CONFIG_FILES(doc/gs/gschemrc)
1043 if test -d $srcdir/example; then
1044 AC_CONFIG_FILES(example/Makefile)
1045 AC_CONFIG_FILES(example/libraries/Makefile)
1047 if test -d $srcdir/lib; then
1048 AC_CONFIG_FILES(lib/CreateLibraryContents.sh)
1049 AC_CONFIG_FILES(lib/CreateLibrary.sh)
1050 AC_CONFIG_FILES(lib/ListLibraryContents.sh)
1051 AC_CONFIG_FILES(lib/Makefile)
1052 AC_CONFIG_FILES(lib/QueryLibrary.sh)
1053 AC_CONFIG_FILES(lib/qfp-ui)
1055 if test -d $srcdir/newlib; then
1056 AC_CONFIG_FILES(newlib/2_pin_thru-hole_packages/Makefile)
1057 AC_CONFIG_FILES(newlib/Makefile)
1058 AC_CONFIG_FILES(newlib/connectors/Makefile)
1059 AC_CONFIG_FILES(newlib/crystal/Makefile)
1060 AC_CONFIG_FILES(newlib/electro-optics/Makefile)
1061 AC_CONFIG_FILES(newlib/headers/Makefile)
1062 AC_CONFIG_FILES(newlib/keystone/Makefile)
1063 AC_CONFIG_FILES(newlib/msp430/Makefile)
1064 AC_CONFIG_FILES(newlib/not_vetted_ingo/Makefile)
1065 AC_CONFIG_FILES(newlib/sockets/Makefile)
1066 AC_CONFIG_FILES(newlib/tests/Makefile)
1068 AC_CONFIG_FILES(src/Makefile)
1069 AC_CONFIG_FILES(src/icons/Makefile)
1070 if test -d $srcdir/tools; then
1071 AC_CONFIG_FILES(tools/Makefile)
1073 if test -d $srcdir/tutorial; then
1074 AC_CONFIG_FILES(tutorial/Makefile)
1078 AC_CONFIG_FILES(tests/inputs/Makefile)
1079 AC_CONFIG_FILES(tests/golden/Makefile)
1080 AC_CONFIG_FILES(tests/golden/hid_bom1/Makefile)
1081 AC_CONFIG_FILES(tests/golden/hid_bom2/Makefile)
1082 AC_CONFIG_FILES(tests/golden/hid_bom3/Makefile)
1083 AC_CONFIG_FILES(tests/golden/hid_bom4/Makefile)
1084 AC_CONFIG_FILES(tests/golden/hid_gerber1/Makefile)
1085 AC_CONFIG_FILES(tests/golden/hid_gerber2/Makefile)
1086 AC_CONFIG_FILES(tests/golden/hid_png1/Makefile)
1087 AC_CONFIG_FILES(tests/Makefile)
1089 dnl win32 build scripts
1090 AC_CONFIG_FILES(win32/Makefile)
1094 with_gui=`echo $with_gui`
1095 with_printer=`echo $with_printer`
1096 with_exporters=`echo $with_exporters | sed 's/,/ /g'`
1098 expandedXDGDATADIR=`eval "echo $XDGDATADIR"`
1099 expandedKDEDATADIR=`eval "echo $KDEDATADIR"`
1101 if test "X$pcb_git_version" = "Xyes" ; then
1104 pcb_sources="tarball"
1108 ** Configuration summary for $PACKAGE $VERSION:
1111 Printer: $with_printer
1112 Exporters: $with_exporters
1113 Source tree distribution: $pcb_sources
1114 Build documentation: $docs_yesno
1115 Build toporouter: $enable_toporouter
1116 Enable toporouter output: $enable_toporouter_output
1117 xdg data directory: $expandedXDGDATADIR
1118 KDE data directory: $expandedKDEDATADIR
1119 dmalloc debugging: $with_dmalloc
1120 ElectricFence debugging: $with_efence
1122 Cross Compiling: $cross_compiling