auto-uref: allow for empty refdes prefix

[geda-gaf.git] / gschem / BUGS

Bugs (no particular order): 
----------------------

        Prioritize this list!

        When copying components, be sure to preserve locked bit.

FIXED   Text direction on rotated fast text line is wrong.

BETTER  Length of fast text line is wrong.
        Length of fast text line is still too long (for attributes)
        since I don't take SHOW_BOTH_VALUE into account

        Relative paths are not displayed properly in the component add 
        dialog box

        Page Revert may or may not have a memory leak, investigate this.

        Try opening a file called untitled_1.sch, doesn't work since
        you have an untitled_1 (the default) already open.

FIXED   Change the color of an attached attribute, and then copy it (color
        changes to yellow oops).

        translate 0 does not seem to work right with nets in the file...
        (nets should not be in the picture anyway, but either way...)

        Zoom in a lot and try to select something with the select box. 
        Not easy to do.

GONE    stretch seems to pick random objects to stretch if you don't select 
        something (cannot replicate)

        Swedish characters don't work. In fact, any Multi key character acts
        funky (or core dump) 

FIXED   still have some core problems with net extension and selections

        Thick lines aren't imaged (write png) correctly

        Zoom with pan doesn't work 100% when you are zoomed out all the way.

FIXED   Net consolidate will not work right (core dump) if you select a net
        and then try to extend that net.. You need to remove that net which
        is being deleted from the selection list, before you delete it.

        Misspell a keyword value in the rc file and gschem cores.. 

BETTER  Almost got that 180 postscript printing bug fixed... not perfect yet

        Mouse pan crashed my X server once

FIXED   slow redraw (due to o_conn_disconnect_update being there), added
        o_redraw_all_fast to be used in places where it's necessary to redraw
        quickly (like in the panning) 

        slow drawbounding box (caused by way too many get_complex_bound calls)

GONE    Select some text while a symbol is at 0,0 and you will see something
        being erased at 0,0.  I haven't got a clue as to what is being 
        erased.  Actually I do, it's the selection list's copy of the text.
        it seems.  I bet before I translate text object I erase it. hmmmm

        If a symbol isn't found, it's removed from the schematic.... 
        Is this the behavior we want?

        Mirror still has some bugs in it when dealing with the new conn
        system (mirror will create extra midpoint connections which are
        temporary only)

        If you put bogus numbers (ie not 0 or 1) in for the visibility and/or
        show_name_value field, you get *totally bogus results!

        Multiple instances of gschem clobber each other's log file, solve
        this how?

        Document how tswindow is being used in the include file.
        (it's also used by snap size), have snapsize get it's own window

        selection2 related bugs:
FIXED   lock and unlock need a seperate color for locking..
FIXED   go through o_misc and get them all working (lock, unlock, embed, 
        unembed)
FIXED   o_mirror doesn't work
FIXED   color change doesn't work...
FIXED   o_edit temporarly #ifed out
FIXED   i_callback_attrib_attach. needs to loop over selection list...
FIXED   copy attribute, stays an attribute... ?
FIXED   i_callback_attrib_detach is also broken
FIXED   edit text and it gets an invalid color
FIXED   toggle vis totally broken
FIXED   selection of invisible
FIXED   Copy an object and attribute, then unselect each using CTRL
        and then click away to unselect both and attribute becomes invalid
        color (caused specifically by: select object, deselect object,
        text was already selected) (not related to copy at all...)
FIXED   net conslidate is broken on objects which have attributes and selected,
        totally broken (dumps core), fixed with a hack (unselect all before you
        attempt).

        Still todo in selection2: 
FIXED   All slot= stuff does not work yet

        does it cause problems that the translate dialog box doesn't
        grab the focus for the app?

        there's a bug in arc visiblity clipping, just zoom around close
        in using DB*-1.sym (the corners)

GONE    Mirror something and then change slots... selection is wrong

GONE    Move a single net.  You will see a stray visual cue at 0,0

        Setting slot=something other than 1 in a symbol doesn't work (ie
        slot isn't updated when you place the component).

        Copy something with slot != 1 and it doesn't draw right when it's
        placed

        Start a component place and then change to a different page.  You
        get a whole bunch of cmt2 NO! warnings 

GONE?   Core dump on 64 bit architectures? 
        1) open stack_1.sch from the examples dir
        2) box zoom somewhere in the schematic
        3) drag the vertical scroll bar up to the top of its range

KLUDGED Really odd behavior with display :'s... type some :'s and then
??????? add a component or net or pin and they disappear? huh?
        (FIXED by adding gdk_draw_point in o_line, not a good solution 
         though) Also don't draw lines with zero length in general

        Observed some really odd characters being written to the log files
        (between Read local gschemrc and Saved ...

GONE    Rotate object... slot is wrong 

        Rotate object with a slot number then copy it immediately.
        slot attribute not being selected.

        View Limits is broken for a single horizontal line (at least you 
        can't see the line because it's below the drawing area)

GONE    When placing an invisible attribute, you get the left over image
        that needs to be erased.

        I'm not eraseing or dealing with the slot= attribute if you change
        the symbol and the attribute is visible.  It won't get properly 
        drawn.  (need to do a redraw to see the visible results)


GONE    In o_select and o_select_many, when you try to update the tail to
        be proper, select_many doesn't work.  I wonder what else is effected
        Might have fixed some of this, but it's still highly suspect.
        
        Got a "Ahh you blew it.. tried to delete something which does
        exist" error.  need to watch for that and replicated it

GONE?   Got an unexplained core dump, dealing with trying to disconnect a 
        bogus net (already freed?).  I haven't been able to replicate this 
        at all.  

GONE    Figure out and fix why text when selected and deselected (and placed)
        is sometimes offset (visually).  You have to do a redraw to get one
        image (non-offset)

GONE    When doing "open symbols...", the newly loaded symbols are not 
        zoomed limits

        Bug in arcs and large large world-size... Don't draw right.
        I think this was caused by incorrect aspect ratio


        Minor bug dealing with zooming out of corners (the zoom factors going
        out are different then going in)


GONE?   Saw some odd selection behavior, ie selecting something when you were
        not inside it's bounding box.  I think this was caused by not having
        snap on.

OKAY?   Selection boxes and hitting the control key does not behave as it
        should (ie selection box toggles existing objects)

OKAY?   Found some wierdness with the symbol translate (due to snap being off)

OKAY?   Unexplained core dump with related to object_lastplace being bogus.
        cannot replicate this. (haven't seen this at all again)


        Regular objects which are locked and then saved to a file will not
        be locked anymore... locking only seems to work on components.

        I'm not sure if tty vs both vs window_log stuff is working? low 
        priority though 

        Select an clib from the comp list and scroll down the component pane
        and then select another clib, other pane not starting from top


OKAY?   Another segfault.  This one totally unexplained.  Was seeing some
        odd behavor with the hotkeys (hotkeys not doing what they should).
        Core dump happened the moment I press the right mouse button (the
        popup menu) which makes me suspect a gtk problem.   This might be
        related to the odd accelerator problem I was seeing (now accelerators
        are removed from the right mouse button popup)
        Unfortunately core not generated since gtk wasn't compiled to 
        generate code dump files.  Need to recompile gtk to do so.

GONE    A segfault will occur if you attach NON text items to other items
        and then delete the whole bunch and then try to select something.
        The cause is unknown but a possible fix is known.  You should not be 
        allowed to attach NON text items as attributes.  (it segfault 
        doesn't always happen, can't replicate it, but it's there somewhere)

OKAY    Apparently, an undocumented feature (or maybe it is documented), but
        if you press a key while you select a item off of a menu (popup or
        pulldown) then you can change the hot key?  Hmmm... that's pretty
        interesting.

        Some sort of resize error when you open a file and the maximize 

        Related to above: load up some schematics, maximize window, flip
        between pages... grid drawn wrong. (probably because in the resize
        handler, you don't go through and set width/height of window in all
        pages)

        You still get xor droppings during a place and expose event happens

        You still get window droppings due to interactions with:
                - status updating (causing expose events which are being
                  ignored 
                - middle button shortcut updates (same reason as above)
        

GONE    What happens if you attach an attribute to two places... nothing, 
        but you should disallow that.
        


GONE    Still have dangling cue blip in lower corner... 
        now seeing it on copys/moves, related to selected drawing conns.

        CHANGED flag -- make sure it's set in all places.

BETTER  Do some sanity on input files 
        (check for zero's...)

        Need to fix +4 stuff in get_line_bounding etc... :
                - get consistant name
                - and perhaps make +4 zoom_factor aware

OKAY    You can't put ='s in text strings (unless it's the seperator for
        name=value in attributes) (is this a bug or just a restriction?)
        (either way, document it).

MOSTLY  Go through and be sure you use the #DEFINES created by configure
DONE

        If a move/copy/compdraw is under an exposed area and an expose
        event happens then you get xor droppings

        There is still a bug.. draw a net and then another one which 
        would cause a midpoint connection... only after you do a redraw do you
        get the change many ways to fix this... but all required either 1) 
        a redraw after every major action, or 2) or a smarter "recalc" routine 

        
        Check the issues related to visibility and if you can select it
        and if it's an attribute


        Pressing key during place causes droppings? 
        Hitting keys and during an action (x_events.c)


        Select something, then hit 'n' instead of 'm' and you get left
        overs from the net command  (same thing as mentioned above. inside
        action and hitting a key leaves ghosts)

GONE?   place two complex.
        - Connect net inbetween.
        - Connect another net to that new net
        Move all... see what happens?  ( be sure components are at the end
        of each of the nets )  It's caused by order dependant searching 
        and if the old and new overlap you will get a round connection


        Things get really slow with huge object copies... 
        Perhaps we don't want to be doing the o_conn_recalc_all on actions. 

        Major bug with add component with outline/bounding, if you zoom
        inbetween an add you get this HUGE monstrocity!
        (transparent zooms not implemented yet)


MUCH    Arcs are a hack by default
BETTER  This has gotten better (a lot better).


FIXED?  Unexplained grid locking when you draw an arc?  must have something 
        to do with the way width+x-x and height+y-y rounds off?
        
        Huge bounding box on arcs... uggg
        For now, arcs have been removed from the boundingbox calc.
        So if you just move an arc, you can't see the bounding box.

        Odd bug related to doing a objtosym (sym cmd), in that you don't get
        an exact move to zero unless you zoom one (or more?) 


XBUG?   Saw some serious root-window corruption and drawing_area corruption
        because 1) of an X server bug in XF86S3V or 2) I'm not clipping lines
        (line clipping should be done by gschem)

-----------------------------------------------------------------------------
Finished stuff:

FIXED   Zoomin far enough and lines/nets start acting really weird!!!!!!!
        (by properly clipping the line)

FIXED   pins colors are being written out as -1


FIXED   Gschem core dumps when I hit the special Windows key...  ha, it 
        doesn't like microsoft keys?  :)

DONE    THERE IS A SIGNIFICANT slowdown in this version (19981013 before
        another release) delete really (with o_conn_disconnect_all with
        big schematics)

FIXED   Attaching an attribute doesn't set CHANGED flag

FIXED   Right now you can attached a text item as an attribute in two places.
        Disallow that

FIXED   Right now you can attach non text items as attributes.
        Disallow that.

FIXED   MAJOR PROBLEM!!!!!!!!!!!!!!!!!!!!! gschem is broken with this broken
        Got a major annoyance... order in copying objects to get attributes
        to attach is a problem.  How do I fix that?  by copying text last

FIXED   If you try to unembed a symbol and it cannot be found in any search
        path then things get slightly screwed up.  See a_basic.c o_unembed

FIXED   Found another core dump bug, if you send a DELETE event to the
        window (from the wm) then on exit gschem will core.  This is okay, 
        since I don't deal with the DELETE event yet...

OKAY    Order in the basename_list is not based on alphabetics (it's based
NOW     on the creation date/inode of the file) (make the order alphabetic)

BETTER  Get consistant behavior for SHIFT/CONTROL in the various modes

FIXED   AGGGG... stuff showing up in basename_list in the wrong order :(

DONE    Can't print )'s and spacing between chars on paper is much larger
        than on the screen (due to postscript using )'s : filter input)

DONE    limits on complex_filename, drawing_filename, text_string etc...
        REMOVE them (the limits that is)
        Size of drawing_filename and friends need to be dynamic....
                drawing_filename
                text_string
                complex_filename
                basename
                clib            

FIXED   Droppings with thick pins and move/copies/deletes? 

DONE    Multiconnection midpoints, should draw a circle, but doesn't for now.
        Put warnings in documentation (ie when you draw many nets to a single
        point you should get a circle... instead you get nothing... 

DONE    Cleanup grid/snapping so that it's more flexable so that you could
        have half grid snaps... (MAJOR ANNOYANCE)

GONE!   Related bug to above, drawing lines, first point must lock and then
        the second can be free. doesn't work vice versa! (related to above)

OKAY    A small bug dealing with arcs and the symbol command.  The x,y location
        will get negative values (which may be okay actually)

FIXED   Roundoff errors creaping into move/copy commands 
        ( some objects would be offset too much or too little relative 
        to the other ones ) Fixed mostly, but still need to re-examine 
        screen to world mapping functions.  This still needs to be dealt 
        with properly. I think this is fixed now.  Did move in world coords
        instead of screen coords

FIXED   Unexplained core dump when opening another window (when compiled
        with -lccmalloc -ldl) related to:
        Odd behavior when quiting multiple windows and then opening another
        schematic in existing windows (can't find a font?) 
        Was caused by freeing common rc variables (ie each window didn't have
        a proper copy of the string)

GONE!   The difference between a save (saveas) and open window is not 
        enough.  This has cause me to nuke a schematic more than once 
        already! (this was fixed by removing this behavior)

FIXED   Opening up a second window (or more) causes the rc file to be read 
        again and that adds the new paths to the current ones.. ugg!  change
        that! 

DONE    There is still some sort of odd behavior with the page manager losing
        its mind.   Not good.  not sure if it's a gtk problem or mine.
        Problem has been identified as bogus parameters to gtk_clist_moveto.

DONE    Need to check if file exists (or check the fp) when you open files.

FIXED   The dialog boxes (in x_dialog) don't look all the same

FIXED   Zoom in a bit, and try selecting something... and then something
        else (many times) and you will see a bug (objects not being selected
        when they should be). (only when zoomed in...)  This is caused by 
        the event state machine going into sbox mode when it should not!  
        Fix this by converting the threshold into something that is dependent
        on the current zoom factor

FIXED   There is a condition that cause gschem to exit (unwanted), Edit some
        text and then unselect the text that is being edited.  This bug
        surfaced when we removed the dialog box grabs.  Other dialog box
        might be affected as well... (fixed by adding grab back to some
        dialog boxes)

FIXED   Suddenly some sort of an event happened and drawing window area 
        was totally wrong (too small) (caused by status label being too long)
        ( Don't have too long status labels ) 

GONE    For every drawing_filename and strcpy (sprintf) you need to check 
        the size (now you need to worry about page_filename)

GONE    Once got a "(null)"... how? Haven't seen it again when I was drawing
        text.  String was set to null.  Should be fixed, but don't know.

GONE    Be sure to go back and fix the huge bounding boxes on (16,32pt) text

FIXED   The selection name in saveas file selectors (and/or others)
        is being nuked. (problem with gtk?)

OKAY    Set a default value for show_name_value

FIXED   Small erases happen once in a while when connecting three nets to
        the same point

FIXED   Also, you cannot print any filename (the path is the problem) that
        has a . in it.  Fixed by replacing the .sch with .ps or just adding
        it

FIXED   Still a minor textsize vs pan vs zoom bug.  zoom in all the way,
        the pan to the edge repeatedly then zoom out... text size doesn't
        look right  (fix by getting flexable font system see below )

FIXED   Drawing a box incorrectly (ie right then left) cause invalid boxes 
        to be drawn and puts invalid boxes into the database. 

FIXED   Printing arcs is broken!

FIXED   Uggg... open multiple windows... add ntext and then close them...
        core dumpy (caused by stupid programmer, freeing memory which was
        already freed accidentally)

GONE    Some xor droppings being left behind when moving text?  X server bug?
        This was seen only on my old box and nowhere else

DONE    Change MOVE so it's sequence is: 1) press m, 2) click to start, 
        3) press to place. 

FIXED   Odd coredump see CORE.LOG, have to see if the happens again with
        coredumping on. (wasn't reseting left,right,top,bottom for heads)

FIXED   Hitting delete and saveas window. and then hitting cancel.

FIXED   Misc pixels at the bottom of drawing area, cause by doing an open
        and then win_height gets set to 719 (supposed to be 720).   The 
        right height will be set if a configure event happens....

FIXED   Don't get a configure event if you hit key while the window is 
        coming up.

DONE    Inconcistancy with click and move and click-hold-draw of nets and 
        others.

GONE    Semaphore the interface shared memory 
        
FIXED   Place something when something is selected! BUG, original selection
        doesn't get unselected


FIXED   Cause of MAJOR instablity on SGI and others:
        Change type of type and p_type to be int or do something about the -1
        Type is now an int      

GONE    Try quitting program before gschem_intr starts.. you get:
        _X11TransSocketUNIXConnect: Can't connect: errno = 4            


GONE    Still occasionally see a screwup on the update of an interface 


DONE    You need to put a linewidth fix in o_pin so that when you draw a pin
        it gets finish (redraw) with the right width (don't need this in o_net
        because of the o_conn_recalc stuff)

FIXED   Still have some doubts over which object should be unredraw
        ( the selection or the actual object )  (right now it's the 
        actual object)

FIXED   Placing a component on another object causes the old comp to 
        be selected.  This is due to the way we handle the select mode
        ( on the release ).  There should be another mode which is null
        which causes a switch to SELECT after the release.

FIXED   Still have some draws when you are doing mass deletes.... coredumps
        See o_conn_disconnect_all in s_basic (s_delete)

OKAY    Visibility of text works, but don't hit toggle vis during an action 

OKAY    Fixed a small bug in o_select, verify it all still works
        
FIXED   Round connection droppings.  Demonstrate: when you have many nets
        some with round connetions.  Delete them all.  Now, when you do this
        some of the nets where the round connections were are deleted (and
        the associated link in the other round connected net).  So when you
        erase the round net, you get droppings, because the net doesn't know
        that it had round connections.  Solution: put in some code in draw:
        which:
                1) if override color == background
                2) connection_1 or connection_2 are not zero
                3) erase the corresponding one 
                THE FIX is in o_net.c in the draw... just as above
                This fix might cause side effects if we start copy/moving
                the connection points 


FIXED   Another round connection problem, draw a net.  Then draw a net  
        which would cause a round connection point to occur.   You will
        see that second net is on top of first connection point.  How
        do you solve this?  (by having a redraw all connection points after
        doing a redraw)

GONE    Still occasionally see interface die or lock up... ????         

FIXED   when you draw some text and then you resize the window, the text
        isn't the same length as it was. (Fixed by drawing each char 
        individually and varring this space depending on size of window)
        Height is still off though, and the lenght is still not *exactly* 
        accurate, but this might be good enough (for now).


OKAY?   Minor bug, but resize events occure twice... put in flag so that
        it occures only once.

FIXED   Major pin/connection bug.  Draw symbol. connect to another symbol 
I THINK (through just a pin) delete one of them.. then copy/move other.
?       core dumpy... :(

OKAY    Odd bug, when you select a complex, the selected image doesn't
I THINK always lineup.  Has something to do with non snap objects and
?       o_*_copy and o_*_translate (has to do with inaccuracies in the 
        display at zoom_factor 0)

FIXED   Fix makefile so that it handles dependencies correctly

FIXED   Deal with pins touching pins...
        
FIXED   Deal with connections to the middle of an net

OKAY?   If you select a net, and then connect something to that selected net,
        it becomes unselected. (is this okay?)

OKAY    Connection points are NOT selected, minor asthetic bug, code gets
        messy if you try to select them, because un selection becomes hell 

OKAY    Still have some minor net conns (the line) not being redrawn if 
        you connect to the middle of a net.  Have to go through code and
        really figure out what is happening where?
        What's happening is:  how can the program know that you just drew
        a line with a possible midpoint connection?  Well solution for now
        is the o_recalc_conn key

DONE    Move origin to lower left instead of upper left

DONE    Make aspect ratio of both window and coord system 4/3


DONE    Still have some net connections not being update.  Need a button
        for update nets  

KLUDGED Deleting object in particular a net, doesn't redraw connection points
I THINK I CAN CLEANLY FIX THIS, BUT it's going to take a new s_delete????

OKAY    Drawing a net, doesn't show the first connection point until you select
        the second.  Is this the behavior we want?  Yes, because you don't know
        what kind of connection you'll get
        
FIXED:  selecting object, and then zoom, doesn't redraw selected object

FIXED:  zooming too much core dump

FIXED:  possible, odd way net draw works with button down or up
        NOW, nets are drawn when the n key is hit.

FIXED:  When you move a complex, you get a total redraw! don't do that 
        
FIXED:  Related to above, doing delete of a complex does a redraw! no!
        
FIXED:  Pan doesn't always give perfectly square aspects
MOSTLY: Well there is still an aspect bug going to the far right/top bottom
        corner (still a bug with text size though)

GONE    Nasty constants in a_pan.c

FIXED   pan bug with interface.  Select pan on the interface window, and then
        pick a point which will center an object.  That object will be 
        selected. 
        (Fixed by removing the SELECT case in button_release, not needed 
         and was causing this bug)

DONE    Change the add component so that you can either drag outline or 
        boundingbox, should be straightforward, just change o_drawbounding
        to be more general

GONE?   There is still a select, copy with bounding box on (you get xor 
        leftovers)
        
FIXED   Fixit so that aspect ratio of display/window doesn't matter??
        Is this even possible?  (It is possible, and it does matter!)

DONE!   Add hotkey for insert component (i perhaps? yes)

DONE!   Text dynamic storage, but it is still limited to 80 chars 

DONE!   Text size selection (was solved through intr)

DONE!   Change arcs, so that degrees are stored, instead of deg*64 

        
DONE!   lack of coupling between zoom_factor and left,top,right,bottom
MOSTLY  (still need some work with font sizes and zoom_factor coupling )

NOT     Zoom different amounts depending on the inital values for right, left 
DONE    etc.. (Irrelavent)

FIXED   Contrained move/copy works for the most part, but try hitting the key
AND     and then going in and out of it... leaves ghosting...
DONE    The solution to this is to 1) disallow mode changing in the middle of
        an action or 2) erase old ghost depending on if you are entering
        contrained or exiting it. (you'll need a flag which is set depending
        on if your in it or not)
        This problem isn't with constrained but with copy/move and actions
        (Hitting any key will cause ghosting)  I think? (key inside action...)

DONE!   Go through o_basic and move o_save(read)_attrib to o_attrib.c

DONE    Streamline all the X globals and stuff in setup

NOTED   Some sort of bug with text/zooming in all the way and outline moving
        Only with biggest font (only on my home machine, new linuxes works 
        fine)

GONE    If you are typing text and before you hit enter you change sizes,
        the current text should reflect this text size

FIXED   Fonts and aspect ratio are not related, so they don't always look
MOSTLY  the same. 

GONE?   Look for not eraseing bounding box with boundingbox draw outline mode

GONE!   Related to above try switching between outline and bounding while
        inside a move/copy, outline stuff is left behind!

OKAY    You need to redraw an object if you move/translate/ copy it, so 
I THINK that the bounding box is update... do we want to change         
        that?  (the way to fix this is recalc bounding in the translate 
        functions)

OKAY    Minor mystery why attributes inside complex don't change colors
        (which is good), oh because they are read from disk!  I think!? 
        YES!

FIXED   Odd behavour of buttons (move/copy), wasn't written for multiselect

FIXED   BUG! Select something, and then draw a multiselect box (don't select 
        anything in this box) and you will see that first object won't
        be unselected

FIXED   Coredump when you do an attach with nothing selected? 

GONE    There is a small redraw bug in net/copy/cancel which is hard
        to reproduce, but basically object_selected wasn't being redrawn

OKAY    Another redraw bug related to hitting escape, if you have a redraw
        in that section then you get two redraws when you inside an action
        Be sure all cancel action buttons look like the right button one,
        because I think that's the most current one

DONE!   Having a too large text size causes a core dump, fix this by
        putting in a check during read/write and force value

DONE!   Corefile is still generated if you have lots of objects, connected it
        an odd fashion and then you do a delete.  basically in the conn
        disconnect you get a dangling pointer.  Solution is to go through and
        disconnect every object which points to the current object!
        Verify this!

DONE!   Go through and make all colors configurable 

DONE!   Quirky multiple select cycle (okay I think)

DONE!   Not too happy with the feedback when you are placing a component
        Two lines are okay, but bounding box would be much much better!
        The way to do this is to create a dummy object (read in file)
        and use this as the object when you draw the bounding box 
        (of course this is exactly what was done)


MOSTLY  Am I freeing everything when I leave?  memory leak? 
FIXED   There is still a small small leak somewhere (yup)

NOTDONE go back and add gdk_flush wherever there was a XFlush 
        Don't do this.. gdk_flush is not needed (and should be used).



DONE    When you copy/move something create a new list and copy those items
        into this list, so that you have something selected at the end.

OKAY    Attributes are going outside of a complex.
        Fine, but you need to do something about loads/saves so that some
        values which are inside a complex get put outside etc...        

DONE!   Deleting all objects and then adding needs to call setup_struct(). 

FIXED   Due to the new new_sel_head stuff, some buttons from interface are 
        broken, see hack in x_events.c (next_state stuff) 

FIXED   I think there is a bug related to this "it happened in deletes" NO
        Definately a data corruption bug
                - Select complex
                - copy complex
                - delete original
                - create copy of copy
                - unselect 
                - redraw (copy is gone)
        Something with select and delete complex? 
        broken behavior in s_delete, commented out "out for now"

FIXED   Possible bug in complex_draw and o_redraw       
        Just copy and delete copy and delete

DONE!   Revamp structure by doing doubly linked list
        
OKAY    Not really a bug, but erasing the bounding box with an arc (since
        it is soo large) effects other parts of the drawing 
        ( Fix this by making bounding box on arc smaller.

OKAY    Do we want to save complexs in a file or just the filename (like it
        is now) Yeah we want to keep it this way, gets way to complex

OKAY    Attributes, do we want a special structure or a regular one
                - Advantages of specialized, less data, simpler data struct
                - Disadvantages of specialized, whole new routines, code waste  
        ( Attributes are text which special links on objects which link them )

DONE:   Remove the font_inflation stuff

DONE:   Farthest left most point must be at the far left possible coord
        Solved with o_complex_to_symbol() 

GONE?   When you do a delete (using keys), delete seems to want to erase
        an nonexistant bounding box (the cyan dashed thing).

DONE!   Fix names in i_keypressed.c

FIXED   using quit button isn't very clean for schem. stupid pause

FIXED   Maybe if you hit a action key (move/copy) and nothing is selected it
        can behave as if you were to hit the button... hmmmm

GONE    Work on detaching interface more... currently the program assumes
        that the interface is there...
        (this is getting there with the SIGCHLD handling )

-interface issues- ALL OF THESE ARE GONE with the intergration of the two

RESOLVED 
        If something is selected when you hit copy, schem will unselect it?
        Basically there are two modes: if an object is selected, then the
        next button press starts the action, else if not then first you go
        into select mode and then the action starts. 

GONE    Add the ability to replace the file selection window when you hit
        the place command again (if the file selection window as already there)

OKAY    Ah, hitting okay when you don't select something.. ugg, in component
        select


DONE    outline of component for place, along with boundingbox

GONE    There is some sort of scrollbar problem with xforms? remove precision
        ( no more scroll bar for text size ) ( also no more xforms )

DONE    Fix room for status (more more more!)

DONE    Fix right increment on text size 
        
DONE    Component button needs ...

DONE    Fix grid color button 
        
DONE    Fix default status line
        
GONE    Check for proper parameters, otherwise it will core

DONE    Possible race if both interface and schem try to send a command
        Yes.. solution is a semaphore
        
DONE    Free the semaphore when you are done? 

DONE    somewhere put the hot key assignements (help? on buttons?)

DONE    Add outline toggle mode 

DONE    Add attribute attach/detach stuff

OKAY    Missing GDK_CONFIGURE from event types wanted list?
----------------------