1 /* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
2 /* vim: set ts=8 sts=2 et sw=2 tw=80: */
3 /* This Source Code Form is subject to the terms of the Mozilla Public
4 * License, v. 2.0. If a copy of the MPL was not distributed with this
5 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
7 /* CRTP refcounting templates. Do not use unless you are an Expert. */
9 #ifndef mozilla_RefCounted_h
10 #define mozilla_RefCounted_h
13 #include <type_traits>
15 #include "mozilla/AlreadyAddRefed.h"
16 #include "mozilla/Assertions.h"
17 #include "mozilla/Atomics.h"
18 #include "mozilla/Attributes.h"
19 #include "mozilla/RefCountType.h"
22 # include "mozilla/WasiAtomic.h"
27 #if defined(MOZILLA_INTERNAL_API)
31 #if defined(MOZILLA_INTERNAL_API) && defined(NS_BUILD_REFCNT_LOGGING)
32 # define MOZ_REFCOUNTED_LEAK_CHECKING
38 * RefCounted<T> is a sort of a "mixin" for a class T. RefCounted
39 * manages, well, refcounting for T, and because RefCounted is
40 * parameterized on T, RefCounted<T> can call T's destructor directly.
41 * This means T doesn't need to have a virtual dtor and so doesn't
44 * RefCounted<T> is created with refcount == 0. Newly-allocated
45 * RefCounted<T> must immediately be assigned to a RefPtr to make the
46 * refcount > 0. It's an error to allocate and free a bare
47 * RefCounted<T>, i.e. outside of the RefPtr machinery. Attempts to
48 * do so will abort DEBUG builds.
50 * Live RefCounted<T> have refcount > 0. The lifetime (refcounts) of
51 * live RefCounted<T> are controlled by RefPtr<T> and
52 * RefPtr<super/subclass of T>. Upon a transition from refcounted==1
53 * to 0, the RefCounted<T> "dies" and is destroyed. The "destroyed"
54 * state is represented in DEBUG builds by refcount==0xffffdead. This
55 * state distinguishes use-before-ref (refcount==0) from
56 * use-after-destroy (refcount==0xffffdead).
58 * Note that when deriving from RefCounted or AtomicRefCounted, you
59 * should add MOZ_DECLARE_REFCOUNTED_TYPENAME(ClassName) to the public
60 * section of your class, where ClassName is the name of your class.
62 * Note: SpiderMonkey should use js::RefCounted instead since that type
63 * will use appropriate js_delete and also not break ref-count logging.
66 const MozRefCountType DEAD
= 0xffffdead;
68 // When building code that gets compiled into Gecko, try to use the
69 // trace-refcount leak logging facilities.
70 class RefCountLogger
{
72 // Called by `RefCounted`-like classes to log a successful AddRef call in the
73 // Gecko leak-logging system. This call is a no-op outside of Gecko. Should be
74 // called afer incrementing the reference count.
76 static void logAddRef(const T
* aPointer
, MozRefCountType aRefCount
) {
77 #ifdef MOZ_REFCOUNTED_LEAK_CHECKING
78 const void* pointer
= aPointer
;
79 const char* typeName
= aPointer
->typeName();
80 uint32_t typeSize
= aPointer
->typeSize();
81 NS_LogAddRef(const_cast<void*>(pointer
), aRefCount
, typeName
, typeSize
);
85 // Created by `RefCounted`-like classes to log a successful Release call in
86 // the Gecko leak-logging system. The constructor should be invoked before the
87 // refcount is decremented to avoid invoking `typeName()` with a zero
88 // reference count. This call is a no-op outside of Gecko.
89 class MOZ_STACK_CLASS ReleaseLogger final
{
92 explicit ReleaseLogger(const T
* aPointer
)
93 #ifdef MOZ_REFCOUNTED_LEAK_CHECKING
95 mTypeName(aPointer
->typeName())
100 void logRelease(MozRefCountType aRefCount
) {
101 #ifdef MOZ_REFCOUNTED_LEAK_CHECKING
102 MOZ_ASSERT(aRefCount
!= DEAD
);
103 NS_LogRelease(const_cast<void*>(mPointer
), aRefCount
, mTypeName
);
107 #ifdef MOZ_REFCOUNTED_LEAK_CHECKING
108 const void* mPointer
;
109 const char* mTypeName
;
114 // This is used WeakPtr.h as well as this file.
115 enum RefCountAtomicity
{ AtomicRefCount
, NonAtomicRefCount
};
117 template <typename T
, RefCountAtomicity Atomicity
>
120 explicit RC(T aCount
) : mValue(aCount
) {}
122 RC(const RC
&) = delete;
123 RC
& operator=(const RC
&) = delete;
125 RC
& operator=(RC
&&) = delete;
127 T
operator++() { return ++mValue
; }
128 T
operator--() { return --mValue
; }
131 void operator=(const T
& aValue
) { mValue
= aValue
; }
134 operator T() const { return mValue
; }
140 template <typename T
>
141 class RC
<T
, AtomicRefCount
> {
143 explicit RC(T aCount
) : mValue(aCount
) {}
145 RC(const RC
&) = delete;
146 RC
& operator=(const RC
&) = delete;
148 RC
& operator=(RC
&&) = delete;
151 // Memory synchronization is not required when incrementing a
152 // reference count. The first increment of a reference count on a
153 // thread is not important, since the first use of the object on a
154 // thread can happen before it. What is important is the transfer
155 // of the pointer to that thread, which may happen prior to the
156 // first increment on that thread. The necessary memory
157 // synchronization is done by the mechanism that transfers the
158 // pointer between threads.
159 return mValue
.fetch_add(1, std::memory_order_relaxed
) + 1;
163 // Since this may be the last release on this thread, we need
164 // release semantics so that prior writes on this thread are visible
165 // to the thread that destroys the object when it reads mValue with
166 // acquire semantics.
167 T result
= mValue
.fetch_sub(1, std::memory_order_release
) - 1;
169 // We're going to destroy the object on this thread, so we need
170 // acquire semantics to synchronize with the memory released by
171 // the last release on other threads, that is, to ensure that
172 // writes prior to that release are now visible on this thread.
173 #if defined(MOZ_TSAN) || defined(__wasi__)
174 // TSan doesn't understand std::atomic_thread_fence, so in order
175 // to avoid a false positive for every time a refcounted object
176 // is deleted, we replace the fence with an atomic operation.
177 mValue
.load(std::memory_order_acquire
);
179 std::atomic_thread_fence(std::memory_order_acquire
);
186 // This method is only called in debug builds, so we're not too concerned
187 // about its performance.
188 void operator=(const T
& aValue
) {
189 mValue
.store(aValue
, std::memory_order_seq_cst
);
194 // Use acquire semantics since we're not sure what the caller is
196 return mValue
.load(std::memory_order_acquire
);
199 T
IncrementIfNonzero() {
200 // This can be a relaxed load as any write of 0 that we observe will leave
201 // the field in a permanently zero (or `DEAD`) state (so a "stale" read of 0
202 // is fine), and any other value is confirmed by the CAS below.
204 // This roughly matches rust's Arc::upgrade implementation as of rust 1.49.0
205 T prev
= mValue
.load(std::memory_order_relaxed
);
207 MOZ_ASSERT(prev
!= detail::DEAD
,
208 "Cannot IncrementIfNonzero if marked as dead!");
209 // TODO: It may be possible to use relaxed success ordering here?
210 if (mValue
.compare_exchange_weak(prev
, prev
+ 1,
211 std::memory_order_acquire
,
212 std::memory_order_relaxed
)) {
220 std::atomic
<T
> mValue
;
223 template <typename T
, RefCountAtomicity Atomicity
>
226 RefCounted() : mRefCnt(0) {}
228 ~RefCounted() { MOZ_ASSERT(mRefCnt
== detail::DEAD
); }
232 // Compatibility with RefPtr.
233 void AddRef() const {
234 // Note: this method must be thread safe for AtomicRefCounted.
235 MOZ_ASSERT(int32_t(mRefCnt
) >= 0);
236 MozRefCountType cnt
= ++mRefCnt
;
237 detail::RefCountLogger::logAddRef(static_cast<const T
*>(this), cnt
);
240 void Release() const {
241 // Note: this method must be thread safe for AtomicRefCounted.
242 MOZ_ASSERT(int32_t(mRefCnt
) > 0);
243 detail::RefCountLogger::ReleaseLogger
logger(static_cast<const T
*>(this));
244 MozRefCountType cnt
= --mRefCnt
;
245 // Note: it's not safe to touch |this| after decrementing the refcount,
247 logger
.logRelease(cnt
);
249 // Because we have atomically decremented the refcount above, only
250 // one thread can get a 0 count here, so as long as we can assume that
251 // everything else in the system is accessing this object through
252 // RefPtrs, it's safe to access |this| here.
254 mRefCnt
= detail::DEAD
;
256 delete static_cast<const T
*>(this);
260 using HasThreadSafeRefCnt
=
261 std::integral_constant
<bool, Atomicity
== AtomicRefCount
>;
263 // Compatibility with wtf::RefPtr.
264 void ref() { AddRef(); }
265 void deref() { Release(); }
266 MozRefCountType
refCount() const { return mRefCnt
; }
267 bool hasOneRef() const {
268 MOZ_ASSERT(mRefCnt
> 0);
273 mutable RC
<MozRefCountType
, Atomicity
> mRefCnt
;
276 #ifdef MOZ_REFCOUNTED_LEAK_CHECKING
277 // Passing override for the optional argument marks the typeName and
278 // typeSize functions defined by this macro as overrides.
279 # define MOZ_DECLARE_REFCOUNTED_VIRTUAL_TYPENAME(T, ...) \
280 virtual const char* typeName() const __VA_ARGS__ { return #T; } \
281 virtual size_t typeSize() const __VA_ARGS__ { return sizeof(*this); }
283 # define MOZ_DECLARE_REFCOUNTED_VIRTUAL_TYPENAME(T, ...)
286 // Note that this macro is expanded unconditionally because it declares only
287 // two small inline functions which will hopefully get eliminated by the linker
288 // in non-leak-checking builds.
289 #define MOZ_DECLARE_REFCOUNTED_TYPENAME(T) \
290 const char* typeName() const { return #T; } \
291 size_t typeSize() const { return sizeof(*this); }
293 } // namespace detail
295 template <typename T
>
296 class RefCounted
: public detail::RefCounted
<T
, detail::NonAtomicRefCount
> {
299 static_assert(std::is_base_of
<RefCounted
, T
>::value
,
300 "T must derive from RefCounted<T>");
307 * AtomicRefCounted<T> is like RefCounted<T>, with an atomically updated
310 * NOTE: Please do not use this class, use NS_INLINE_DECL_THREADSAFE_REFCOUNTING
313 template <typename T
>
314 class AtomicRefCounted
315 : public mozilla::detail::RefCounted
<T
, mozilla::detail::AtomicRefCount
> {
317 ~AtomicRefCounted() {
318 static_assert(std::is_base_of
<AtomicRefCounted
, T
>::value
,
319 "T must derive from AtomicRefCounted<T>");
323 } // namespace external
325 } // namespace mozilla
327 #endif // mozilla_RefCounted_h