gdb/doc/Makefile.in

   1 ##Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002, 2003,
   2 ##2007, 2008 Free Software Foundation, Inc.
   3
   4 # Makefile for GDB documentation.
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  20
  21 srcdir = @srcdir@
  22 VPATH = @srcdir@
  23
  24 prefix = @prefix@
  25
  26 infodir = @infodir@
  27 pdfdir = $(prefix)/share/doc/gdb
  28 htmldir = $(prefix)/html
  29
  30 SHELL = @SHELL@
  31
  32 LN_S = @LN_S@
  33
  34 INSTALL = @INSTALL@
  35 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  36 INSTALL_DATA = @INSTALL_DATA@
  37
  38 mkinstalldirs = $(SHELL) $(srcdir)/../../mkinstalldirs
  39
  40 # main GDB source directory
  41 gdbdir = $(srcdir)/..
  42
  43 # where to find texinfo; GDB dist should include a recent one
  44 TEXIDIR=${gdbdir}/../texinfo
  45
  46 # where to find makeinfo, preferably one designed for texinfo-2
  47 MAKEINFO=makeinfo
  48
  49 # Note that texinfo 4.0's makeinfo --html can only generate a
  50 # single file, which would be too large, so continue to use
  51 # texi2html. -sts 2000-03-28
  52 # Contrary to documentation, the current directory is not
  53 # searched by texi2html, so specify it explicitly.
  54 # -macro 2007-07-26
  55 MAKEHTML = texi2html
  56 MAKEHTMLFLAGS = -menu -split_chapter -I .
  57
  58 # where to find texi2roff, ditto
  59 TEXI2ROFF=texi2roff
  60
  61 # where to find texi2dvi, ditto
  62 TEXI2DVI=texi2dvi
  63
  64 # Where is the source dir for the READLINE library doc?
  65 # Traditionally readline is in .. or .
  66 READLINE_DIR = ${gdbdir}/../readline/doc
  67
  68 # The GDB/MI docs come from a sibling directory ../mi
  69 GDBMI_DIR = ${gdbdir}/mi
  70
  71 SET_TEXINPUTS = \
  72    TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
  73
  74 # Files which should be generated via 'info' and installed by 'install-info'
  75 INFO_DEPS = gdb.info gdbint.info stabs.info annotate.info
  76
  77 # Files which should be generated via 'pdf' and installed by 'install-pdf'
  78 PDFFILES = gdb.pdf gdbint.pdf stabs.pdf refcard.pdf annotate.pdf
  79
  80 # There may be alternate predefined collections of switches to configure
  81 # the GDB manual.  Normally this is not done in synch with the software
  82 # config system, since this choice tends to be independent; most people
  83 # want a doc config of `all' for a generic manual, regardless of sw config.
  84 DOC_CONFIG = all
  85
  86 # This list of sed edits will edit the GDB reference card
  87 # for what fonts and what papersize to use.
  88 # By default (NO edits applied), the refcard uses:
  89 #    - Computer Modern (CM) fonts
  90 #    - US letter paper (8.5x11in)
  91 # List some of the following files for alternative fonts and paper:
  92 #  a4rc.sed     use A4 paper (297 x 210 mm)
  93 #  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
  94 # lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
  95 # e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
  96 #      for A4, CM fonts:    REFEDITS = a4rc.sed
  97 #      for US, PS fonts:    REFEDITS = psrc.sed
  98 #      for default:
  99 REFEDITS =
 100
 101 # Don Knuth's TeX formatter
 102 TEX = tex
 103 PDFTEX = pdftex
 104
 105 # Program to generate Postscript files from DVI files.
 106 DVIPS = dvips
 107
 108 # Main GDB manual
 109 GDB_DOC_SOURCE_INCLUDES = \
 110         $(srcdir)/fdl.texi \
 111         $(srcdir)/gpl.texi \
 112         $(srcdir)/agentexpr.texi \
 113         $(READLINE_DIR)/rluser.texi \
 114         $(READLINE_DIR)/inc-hist.texinfo
 115 GDB_DOC_BUILD_INCLUDES = \
 116         gdb-cfg.texi \
 117         GDBvn.texi
 118 GDB_DOC_FILES = \
 119         $(srcdir)/gdb.texinfo \
 120         $(GDB_DOC_SOURCE_INCLUDES) \
 121         $(GDB_DOC_BUILD_INCLUDES)
 122
 123 # Internals Manual
 124 GDBINT_DOC_SOURCE_INCLUDES = \
 125         $(srcdir)/fdl.texi \
 126         $(srcdir)/observer.texi
 127 GDBINT_DOC_BUILD_INCLUDES = \
 128         gdb-cfg.texi \
 129         GDBvn.texi
 130 GDBINT_DOC_FILES = \
 131         $(srcdir)/gdbint.texinfo \
 132         $(GDBINT_DOC_SOURCE_INCLUDES) \
 133         $(GDBINT_DOC_BUILD_INCLUDES)
 134
 135 # Stabs manual: All files
 136 STABS_DOC_SOURCE_INCLUDES = \
 137         $(srcdir)/fdl.texi
 138 STABS_DOC_BUILD_INCLUDES =
 139 STABS_DOC_FILES = \
 140         $(srcdir)/stabs.texinfo \
 141         $(STABS_DOC_SOURCE_INCLUDES) \
 142         $(STABS_DOC_BUILD_INCLUDES)
 143
 144 # Annotate migration document
 145 ANNOTATE_DOC_SOURCE_INCLUDES = \
 146         $(srcdir)/fdl.texi
 147 ANNOTATE_DOC_BUILD_INCLUDES = \
 148         gdb-cfg.texi
 149 ANNOTATE_DOC_FILES = \
 150         $(srcdir)/annotate.texinfo \
 151         $(ANNOTATE_DOC_SOURCE_INCLUDES) \
 152         $(ANNOTATE_DOC_BUILD_INCLUDES)
 153
 154 #### Host, target, and site specific Makefile fragments come in here.
 155 ###
 156
 157 all:
 158
 159 info: $(INFO_DEPS)
 160 dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi annotate.dvi
 161 ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps
 162 html: gdb_toc.html gdbint_toc.html stabs_toc.html annotate_toc.html
 163 pdf: $(PDFFILES)
 164 all-doc: info dvi ps # pdf
 165 diststuff: info
 166
 167 install-info: $(INFO_DEPS)
 168         $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(infodir)
 169         @list='$(INFO_DEPS)'; \
 170         for file in $$list; do \
 171           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 172           for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
 173             if test -f $$d/$$ifile; then \
 174               echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
 175               $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
 176             else : ; fi; \
 177           done; \
 178         done
 179         $(POST_INSTALL)
 180         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 181           list='$(INFO_DEPS)'; \
 182           for file in $$list; do \
 183             echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
 184             install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
 185           done; \
 186         else : ; fi
 187
 188 uninstall-info:
 189         $(PRE_UNINSTALL)
 190         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 191           ii=yes; \
 192         else ii=; fi; \
 193         list='$(INFO_DEPS)'; \
 194         for file in $$list; do \
 195           test -z "$$ii" \
 196             || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
 197         done
 198         $(NORMAL_UNINSTALL)
 199         list='$(INFO_DEPS)'; \
 200         for file in $$list; do \
 201           (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
 202         done
 203
 204 install-html: html
 205         for i in *.html ; do \
 206                 $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; \
 207         done
 208
 209 pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 210
 211 install-pdf: $(PDFFILES)
 212         @$(NORMAL_INSTALL)
 213         test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
 214         @list='$(PDFFILES)'; for p in $$list; do \
 215           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 216           f=$(pdf__strip_dir) \
 217           echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
 218           $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
 219         done
 220
 221 STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf
 222
 223 # Copy the object files from a particular stage into a subdirectory.
 224 stage1: force
 225         -mkdir stage1
 226         -mv $(STAGESTUFF) stage1
 227
 228 stage2: force
 229         -mkdir stage2
 230         -mv $(STAGESTUFF) stage2
 231
 232 stage3: force
 233         -mkdir stage3
 234         -mv $(STAGESTUFF) stage3
 235
 236 against=stage2
 237
 238 comparison: force
 239         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 240
 241 de-stage1: force
 242         -(cd stage1 ; mv -f * ..)
 243         -rmdir stage1
 244
 245 de-stage2: force
 246         -(cd stage2 ; mv -f * ..)
 247         -rmdir stage2
 248
 249 de-stage3: force
 250         -(cd stage3 ; mv -f * ..)
 251         -rmdir stage3
 252
 253 # GDB QUICK REFERENCE (dvi output)
 254 refcard.dvi : refcard.tex $(REFEDITS)
 255         echo > tmp.sed
 256         for f in x $(REFEDITS) ; do \
 257                 test x$$f = xx && continue ; \
 258                 cat $(srcdir)/$$f >>tmp.sed ; \
 259         done
 260         sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 261         $(SET_TEXINPUTS) $(TEX) sedref.tex
 262         mv sedref.dvi refcard.dvi
 263         rm -f sedref.log sedref.tex tmp.sed
 264
 265 refcard.ps : refcard.dvi
 266         $(DVIPS) -t landscape -o $@ $?
 267
 268 refcard.pdf : refcard.tex $(REFEDITS)
 269         echo > tmp.sed
 270         for f in x $(REFEDITS) ; do \
 271                 test x$$f = xx && continue ; \
 272                 cat $(srcdir)/$$f >>tmp.sed ; \
 273         done
 274         sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 275         $(SET_TEXINPUTS) $(PDFTEX) sedref.tex
 276         mv sedref.pdf refcard.pdf
 277         rm -f sedref.log sedref.tex tmp.sed
 278
 279 # File to record current GDB version number (copied from main dir version.in)
 280 GDBvn.texi : ${gdbdir}/version.in
 281         echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
 282         mv GDBvn.new GDBvn.texi
 283
 284 # Updated atomically
 285 .PRECIOUS: GDBvn.texi
 286
 287 # Choose configuration for GDB manual (normally `all'; normally not tied into
 288 # `configure' script because most users prefer generic version of manual,
 289 # not one for their binary config---which may not be specifically
 290 # defined anyways).
 291 gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
 292         (test "$(LN_S)" = "ln -s" && \
 293           ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
 294         ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 295         cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
 296
 297 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 298 # If your texinfo or makeinfo don't support these, get a new texinfo release
 299 #
 300 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
 301 #   Note that we can *generate* GDBvn.texi, but since we distribute one in the
 302 #   source directory for the benefit of people who *don't* use this makefile,
 303 #   VPATH will often tell make not to bother building it, because the one
 304 #   in the srcdir is up to date.  (if not, then make should build one here).
 305
 306 # Clean these up before each run.  Avoids a catch 22 with not being
 307 # able to re-generate these files (to fix a corruption) because these
 308 # files contain a corruption.
 309 GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 310         gdb.tp* gdb.vr*
 311
 312 # GDB MANUAL: TeX dvi file
 313 gdb.dvi: ${GDB_DOC_FILES}
 314         if [ ! -f ./GDBvn.texi ]; then \
 315                 (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 316                 ln $(srcdir)/GDBvn.texi . || \
 317                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 318         rm -f $(GDB_TEX_TMPS)
 319         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo
 320
 321 gdb.ps: gdb.dvi
 322         $(DVIPS) -o $@ $?
 323
 324 gdb.pdf: ${GDB_DOC_FILES}
 325         if [ ! -f ./GDBvn.texi ]; then \
 326                 (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 327                 ln $(srcdir)/GDBvn.texi . || \
 328                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 329         rm -f $(GDB_TEX_TMPS)
 330         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo
 331
 332 # GDB MANUAL: info file
 333 gdb.info: ${GDB_DOC_FILES}
 334         $(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
 335                 -o gdb.info $(srcdir)/gdb.texinfo
 336
 337 # GDB MANUAL: roff translations
 338 # Try to use a recent texi2roff.  v2 was put on prep in jan91.
 339 # If you want an index, see texi2roff doc for postprocessing
 340 # and add -i to texi2roff invocations below.
 341 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
 342 #    corresponding -e lines when later texi2roff's are current)
 343 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
 344 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
 345 # + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
 346 # + @alphaenumerate is ridiculously new, turned into @enumerate
 347
 348 # texi2roff doesn't have a notion of include dirs, so we have to fake
 349 # it out for gdb manual's include files---but only if not configured
 350 # in main sourcedir.
 351 links2roff: $(GDB_DOC_SOURCE_INCLUDES)
 352         if [ ! -f gdb.texinfo ]; then \
 353                 (test "$(LN_S)" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) || \
 354                 ln $(GDB_DOC_SOURCE_INCLUDES)    . || \
 355                 cp $(GDB_DOC_SOURCE_INCLUDES)    . ; \
 356         fi
 357         touch links2roff
 358
 359 # gdb manual suitable for [gtn]roff -me
 360 gdb.me: $(GDB_DOC_FILES) links2roff
 361         sed -e '/\\input texinfo/d' \
 362                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 363                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 364                 -e '/^@c /d' \
 365                 -e 's/{.*,,/{/' \
 366                 -e 's/@ / /g' \
 367                 -e 's/^@alphaenumerate/@enumerate/g' \
 368                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 369                 $(srcdir)/gdb.texinfo | \
 370         $(TEXI2ROFF) -me | \
 371         sed -e 's/---/\\(em/g' \
 372         >gdb.me
 373
 374 # gdb manual suitable for [gtn]roff -ms
 375 gdb.ms: $(GDB_DOC_FILES) links2roff
 376         sed -e '/\\input texinfo/d' \
 377                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 378                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 379                 -e '/^@c /d' \
 380                 -e 's/{.*,,/{/' \
 381                 -e 's/@ / /g' \
 382                 -e 's/^@alphaenumerate/@enumerate/g' \
 383                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 384                 $(srcdir)/gdb.texinfo | \
 385         $(TEXI2ROFF) -ms | \
 386         sed -e 's/---/\\(em/g' \
 387         >gdb.ms
 388
 389 # gdb manual suitable for [tn]roff -mm
 390 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
 391 #   try leaving them in
 392 gdb.mm: $(GDB_DOC_FILES) links2roff
 393         sed -e '/\\input texinfo/d' \
 394                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 395                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 396                 -e '/^@c /d' \
 397                 -e 's/{.*,,/{/' \
 398                 -e '/@noindent/d' \
 399                 -e 's/@ / /g' \
 400                 -e 's/^@alphaenumerate/@enumerate/g' \
 401                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 402                 $(srcdir)/gdb.texinfo | \
 403         $(TEXI2ROFF) -mm | \
 404         sed -e 's/---/\\(em/g' \
 405         >gdb.mm
 406
 407 # GDB MANUAL: HTML file
 408
 409 gdb_toc.html: ${GDB_DOC_FILES}
 410         $(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
 411
 412 # Clean these up before each run.  Avoids a catch 22 with not being
 413 # able to re-generate these files (to fix a corruption) because these
 414 # files contain a corruption.
 415 GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 416         gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
 417
 418 # GDB INTERNALS MANUAL: TeX dvi file
 419 gdbint.dvi: $(GDBINT_DOC_FILES)
 420         rm -f $(GDBINT_TEX_TMPS)
 421         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo
 422
 423 gdbint.ps : gdbint.dvi
 424         $(DVIPS) -o $@ $?
 425
 426 gdbint.pdf: $(GDBINT_DOC_FILES)
 427         rm -f $(GDBINT_TEX_TMPS)
 428         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo
 429
 430 # GDB INTERNALS MANUAL: info file
 431
 432 gdbint.info: $(GDBINT_DOC_FILES)
 433         $(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo
 434
 435 # GDB INTERNALS MANUAL: HTML file
 436
 437 gdbint_toc.html: $(GDBINT_DOC_FILES)
 438         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
 439
 440 stabs.info: $(STABS_DOC_FILES)
 441         $(MAKEINFO) -I $(srcdir) -o stabs.info $(srcdir)/stabs.texinfo
 442
 443 # STABS DOCUMENTATION: HTML file
 444
 445 stabs_toc.html: $(STABS_DOC_FILES)
 446         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
 447
 448 # Clean these up before each run.  Avoids a catch 22 with not being
 449 # able to re-generate these files (to fix a corruption) because these
 450 # files contain a corruption.
 451 STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 452         stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
 453
 454 # STABS DOCUMENTATION: TeX dvi file
 455 stabs.dvi : $(STABS_DOC_FILES)
 456         rm -f $(STABS_TEX_TMPS)
 457         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo
 458
 459 stabs.ps: stabs.dvi
 460         $(DVIPS) -o $@ $?
 461
 462 stabs.pdf: $(STABS_DOC_FILES)
 463         rm -f $(STABS_TEX_TMPS)
 464         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo
 465
 466 # Clean these up before each run.  Avoids a catch 22 with not being
 467 # able to re-generate these files (to fix a corruption) because these
 468 # files contain a corruption.
 469 ANNOTATE_TEX_TMPS = annotate.aux annotate.cp* annotate.fn* annotate.ky* \
 470         annotate.log annotate.pg* annotate.toc annotate.tp* annotate.vr*
 471
 472 # ANNOTATE DOCUMENTATION: TeX dvi file
 473 annotate.dvi : $(ANNOTATE_DOC_FILES)
 474         rm -f $(ANNOTATE_TEX_TMPS)
 475         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/annotate.texinfo
 476
 477 annotate.ps: annotate.dvi
 478         $(DVIPS) -o $@ $?
 479
 480 annotate.pdf: $(ANNOTATE_DOC_FILES)
 481         rm -f $(ANNOTATE_TEX_TMPS)
 482         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/annotate.texinfo
 483
 484 annotate.info: $(ANNOTATE_DOC_FILES)
 485         $(MAKEINFO)  -I $(srcdir) -o annotate.info $(srcdir)/annotate.texinfo
 486
 487 annotate_toc.html: $(ANNOTATE_DOC_FILES)
 488         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/annotate.texinfo
 489
 490 force:
 491
 492 Makefile: Makefile.in $(host_makefile_frag) config.status
 493         $(SHELL) ./config.status
 494
 495
 496 # The "least clean" level of cleaning.  Get rid of files which are
 497 # automatically generated files that are just intermediate files,
 498
 499 mostlyclean:
 500         rm -f gdb.mm gdb.ms gdb.me links2roff
 501         rm -f $(GDB_TEX_TMPS)
 502         rm -f $(GDBINT_TEX_TMPS)
 503         rm -f $(STABS_TEX_TMPS)
 504         rm -f $(ANNOTATE_TEX_TMPS)
 505         rm -f sedref.dvi sedref.tex tmp.sed
 506
 507 clean: mostlyclean
 508         rm -f gdb-cfg.texi
 509
 510 distclean: clean
 511         rm -f Makefile config.status config.log
 512
 513 # GDBvn.texi, the dvi files, the info files, and the postscript files,
 514 # are all part of the distribution, so it should not be removed by
 515 # "clean" or "distclean".  Use maintainer-clean to remove them.
 516
 517 maintainer-clean realclean: distclean
 518         rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
 519
 520 install: install-info
 521
 522 uninstall: uninstall-info