4 * Copyright (c) 1987-2007 Sun Microsystems, Inc.
8 Overview of changes in gcalctool 5.21.0
10 * Fix for bug #326938 – Display cursor in input area; allow home and
11 end keys. This is in arithmetic precedence mode only.
13 * Fix for bug #484158 – Setting Accuracy is incorrect via the 0-9 places
16 * Fix for bug #439087 – Gcalctool can't handle small physic constants
17 like the Boltzmann constant. The number of significant places has
18 been increased to 99 and the number of displayable digits has been
19 increased to 200. The online help has been adjusted to reflect these
22 Note that if you have something in the gcalctool display that is
23 wider than the display area, a scrollbar is shown, but the first
24 digit isn't properly displayed. The workaround here, is to enlarge
25 the size of the calculator window until the scrollbar goes away.
26 I believe this is a Gtk+ problem and have filed bug #482688 against
29 * Fixed bug #367738 – [doc] Square root documentation needs to be updated.
30 The entry in the online help now includes examples for both arithmetic
31 precedence and non-arithmetic precedence mode.
33 * Fixed bug #428571 – [doc] Repetitive usage of "use".
35 * Use GNOME_MAINTAINER_MODE_DEFINES() to handle *_DISABLE_DEPRECATED
37 * Fixed bug #428573 – [doc] Spelling of logical gates.
38 The logical operations, And, Not, Or, Xor and Xnor now use uppercase
39 letters (AND, NOT, OR, XOR and XNOR) for both the buttons and in the
40 display area in arithmetic precedence mode. The gcalctool manual
41 pages and the online help have been updated accordingly.
43 The XOR operation in non-arithmetic mode was doing a multiplication
46 The result for the AND example in the online help was incorrect.
48 The syntax for using NOT in aritmetic mode is different then for
49 non-arithmetic mode. The online help example has been updated to
52 * Fixed bug #469245 – Hexadecimal input is not intuitive and
53 bug #455889 – Copy/paste of lower case hex letter does not work.
54 The hexadecimal digits have been changed back to their pre Sept
55 2003 (bug #118826) values of "a" - "f".
57 The following functions have also had their keyboard shortcuts
58 reverted back to their pre Sept 2003 upper-case values:
62 [D] - Double-declining depreciation
63 [E] - Enter an exponential number
64 [F] - User-defined functions
66 With copy/paste operations, where the user is pasting a string into
67 gcalctool, the copy buffer is now iterated over. If an "A", "B", "C",
68 "D" or "F" character is encountered, it will be converted to its
69 lowercase equivalent. If an "E" is found, and the next character is a
70 "-" or a "+", then it remains as an upper case "E" (it's assumed to be
71 a possible exponential number), otherwise its converted to a lower
74 Displaying of hex digits in the gcalctool display will still be
75 in uppercase. Displaying of the "e" in an exponential number will
76 still be in lower-case.
78 The way to enter exponential numbers in arithmetic precedence mode
79 has changed. The following four examples should show you the new
82 1 2 Exp + 8 = 1200000000
83 - 1 2 Exp + 8 = -1200000000
84 1 2 Exp - 8 = 0.00000012
85 - 1 2 Exp - 8 = -0.00000012
87 In both left-to-right precedence and arithmetic precedence modes, if
88 the user enters a numeric digit that is incorrect for the current
89 numeric base, this shouldn't be allowed and should not be entered
92 The gcalctool documentation (and tooltips) have been updated to
93 reflect these changes.
95 * Fixed bug #479102 – memory registers dialogue should use ngettext.
97 * Fixed bug #478961 – GtkAaction use.
99 * Fixed bug #478964 – don't use deprecated gtk_widget_ref func.
101 * Fixed bug #478979 – show menu help in statusbar.
103 * Fixed bug #479064 – should use ngettext on the Acc button.
105 * Fixed bug #479097 – use gtkmessagedialog.
107 * Fixed bug #479066 – weird way to use gnome menus-have-icons setting.
111 Overview of changes in gcalctool 5.20.0
113 * Released a gcalctool tarball for GNOME 2.20.0.
117 Overview of changes in gcalctool 5.19.92
119 * Released a gcalctool tarball for GNOME 2.19.92.
123 Overview of changes in gcalctool 5.19.91
125 * Released a gcalctool tarball for GNOME 2.19.91.
127 - Fixed bug #467442 – gcalctool does not appear in xfce4 menu.
131 Overview of changes in gcalctool 5.19.90
133 * Released a gcalctool tarball for GNOME 2.19.90.
135 - Adjusted the MAINTAINERS file to the new format.
139 Overview of changes in gcalctool 5.19.6
141 * Released a gcalctool tarball for GNOME 2.19.6.
143 - Remove help/de/Makefile due to gnome-doc-utils migration.
145 - Fixed bug #459702 – gcalc does not build against gtk+-2.11.6.
146 Occurances of gtk_tooltips_set_tip are now gtk_widget_set_tooltip_text.
148 - Fixed bug #439415. Always use left-to-right direction for button's boxes.
152 Overview of changes in gcalctool 5.19.5
154 * Released a gcalctool tarball for GNOME 2.19.5.
156 - Applied Sun patch to change the Comment line in gcalctool.desktop.in
158 - Fixed bug #451286 – 0 power of 0. This now returns 1 and not an error.
160 - Fixed bug #450790 – crash in Calculator when pasting in a very large
165 Overview of changes in gcalctool 5.19.4
167 * Released a gcalctool tarball for GNOME 2.19.4.
169 - Fixed bug #448263 – drop libgnome dependency
173 Overview of changes in gcalctool 5.19.3
175 * Released a gcalctool tarball for GNOME 2.19.3.
177 - Fixed bug #439985 – Negative value not saved in memory register across
178 invocations of gcalctool. This was also a problem was negative constants.
182 Overview of changes in gcalctool 5.19.2
184 * Released a gcalctool tarball for GNOME 2.19.2.
188 Overview of changes in gcalctool 5.19.1
190 * Released a gcalctool tarball for GNOME 2.19.1.
194 Overview of changes in gcalctool 5.9.14
196 * Released a gcalctool tarball for GNOME 2.18.0 (Final).
200 Overview of changes in gcalctool 5.9.13
202 * Released a gcalctool tarball for GNOME 2.18.0 (Release Candidate).
206 Overview of changes in gcalctool 5.9.12
208 * Released a gcalctool tarball for GNOME 2.18.0 (beta-2).
212 Overview of changes in gcalctool 5.9.11
214 * Released a gcalctool tarball for GNOME 2.18.0 (beta-1).
218 Overview of changes in gcalctool 5.9.10
220 * All copyright messages updated for 2007.
221 * Released a gcalctool tarball for GNOME 2.17.5.
225 Overview of changes in gcalctool 5.9.9
227 * Released a gcalctool tarball for GNOME 2.17.4.
231 Overview of changes in gcalctool 5.9.8
233 * Released a gcalctool tarball for GNOME 2.17.3.
237 Overview of changes in gcalctool 5.9.7
239 * Released a gcalctool tarball for GNOME 2.17.2.
243 Overview of changes in gcalctool 5.9.6
245 * Fixed bug #358782. Fixup sloppy string handling.
249 Overview of changes in gcalctool 5.9.5
251 * Fixed bug #364410. Incorrectly rounded pi constant.
255 Overview of changes in gcalctool 5.9.4
257 * Released a gcalctool tarball for GNOME 2.17.1.
261 Overview of changes in gcalctool 5.9.3
263 * Fixed bug 359291 - crash when localized decimal point is greater than
264 1 char. Removed the bogus assert.
268 Overview of changes in gcalctool 5.9.2
270 * Fixed bug #358337 - gcalctool no longer crashes in the Oriya locale due
271 to sloppy string handling.
272 * Fixed bug #354730 - crash in Calculator: running 3x10^38 using bi..
273 * Fixed bug #357208 - Bitcalculating extension needs to support negative
278 Overview of changes in gcalctool 5.9.1
280 * Fixed bug #157961 - Bitcalculating extension for gcalctool.
281 * Fixed bug #355648 - Error reporting should be consistent.
282 * Fixed bug #135140 - percent operator works not as expected.
286 Overview of changes in gcalctool 5.9.0
288 * Fixed bug #349981 - gcalctool should save screen position for next start.
292 Overview of changes in gcalctool 5.8.24
294 * Released a gcalctool tarball for GNOME 2.16.0 (Final).
298 Overview of changes in gcalctool 5.8.23
300 * Released a gcalctool tarball for GNOME 2.16.0 (RC1).
304 Overview of changes in gcalctool 5.8.22
306 * Removed several chunks of code that were surronded by #if 0/#endif.
310 Overview of changes in gcalctool 5.8.21
312 * Fixed bug #350341. gcalctool now builds again with gcc v2.95.
316 Overview of changes in gcalctool 5.8.20
318 * Released a gcalctool tarball for GNOME 2.16.0 (beta2).
322 Overview of changes in gcalctool 5.8.19
324 * More work on bug #347700. Added another "Note to translators"
325 comment for the Abs button labels.
327 * Fixed bug #348452. Removed line for help/sv/Makefile.in
329 * Released a gcalctool tarball for GNOME 2.16.0 (beta1).
333 Overview of changes in gcalctool 5.8.18
335 * Work on bug #347700. Added a "Note to translators" comment for the
336 Bksp and Clr button labels.
340 Overview of changes in gcalctool 5.8.17
342 * Released a gcalctool tarball for GNOME 2.15.4.
346 Overview of changes in gcalctool 5.8.16
348 * Released a gcalctool tarball for GNOME 2.15.3.
352 Overview of changes in gcalctool 5.8.15
354 * Fixed bug #343150. Gcalctool no longer crashes when switching to
359 Overview of changes in gcalctool 5.8.14
361 * Adjusted configure.in so that gcalctool now requires intltool v0.35.0.
365 Overview of changes in gcalctool 5.8.13
367 * Released a gcalctool tarball for GNOME 2.15.2.
371 Overview of changes in gcalctool 5.8.12
373 * Fixup compiler warnings from inclusion of last patch.
377 Overview of changes in gcalctool 5.8.11
379 * Fixed bug #163538 (http://bugzilla.gnome.org/show_bug.cgi?id=163538)
380 Backspace results in mal-formed expression.
382 * = button is now also a one step undo. (This feature was temporary
383 disabled by the previous redo/undo patch.)
385 * Removed gotos from do_expression function. (This change might add
386 unstability as this is a major change to the expression mode state
389 * Functions (such as sin, cos, tan..) can use previously calculated value.
393 Overview of changes in gcalctool 5.8.10
395 * First cut at an Undo/Redo implementation for use with the arithmetic
396 operator precedence mode.
400 Overview of changes in gcalctool 5.8.9
402 * Respun the gcalctool tarball for GNOME 2.15.1 as the po/*.po files
406 Overview of changes in gcalctool 5.8.8
408 * Removed .../po/Makefile.in.in. Shouldn't have been in CVS.
409 * Released a gcalctool tarball for GNOME 2.15.1.
413 Overview of changes in gcalctool 5.8.7
415 * Fixed bug #337897. Changes to use po/LINGUAS file.
419 Overview of changes in gcalctool 5.8.6
421 * Fixed bug #338220. The 'Show trailing zeroes' option in the View menu
422 should now be correctly set [in]sensitive depending upon which mode
427 Overview of changes in gcalctool 5.8.5
429 * Fixed bug #332023. The bitwise operators now work in arithmetic operator
430 precedence mode, when you use them with the result of a previous operation.
434 Overview of changes in gcalctool 5.8.4
436 * Fixed bug #327729. The fields in the memory register window were not
437 correctly aligned in some themes.
441 Overview of changes in gcalctool 5.8.3
443 * Fixed bug #330867. Added License info to the Gcalctool About dialog.
447 Overview of changes in gcalctool 5.8.2
449 * Fixed bug #335095. Gcalctool no longer displays the current mode in
450 the title bar when in Basic mode (due to lack of space).
454 Overview of changes in gcalctool 5.8.1
456 * Fixed bug #335236. Gcalctool schemas files should be installed if
457 built with "--without-gnome".
461 Overview of changes in gcalctool 5.8.0
463 * Adjustments to the AOP code so that e to the power of x gives the
464 correct answer at high precision.
468 Overview of changes in gcalctool 5.7.32
470 * Released a gcalctool tarball for GNOME 2.14.0 (Final).
474 Overview of changes in gcalctool 5.7.31
476 * Fix for bug #333078. cvs fails to build due to bg translation of help.
478 * Inclusion of a translation of gcalctool help for the bg locale.
482 Overview of changes in gcalctool 5.7.30
484 * Released a gcalctool tarball for GNOME 2.14.0 (RC).
488 Overview of changes in gcalctool 5.7.29
490 * Released a gcalctool tarball for GNOME 2.14.0 (beta2).
494 Overview of changes in gcalctool 5.7.28
496 * Released a gcalctool tarball for GNOME 2.14.0 (beta1).
500 Overview of changes in gcalctool 5.7.27
502 * Refixed bug #323150. The recent changes to the square root and
503 subtraction button labels broke the token parser for arithmetic
508 Overview of changes in gcalctool 5.7.26
510 * Fixed bug #327124. Changes to fix bug #326344 had the side-effect of
511 causing the CE button to no longer work correctly.
515 Overview of changes in gcalctool 5.7.25
517 * Fixed bug #327214. The results from performing trig functions were not
518 being passed on to future calculations correctly (in non-arithmetic
519 operator precedence mode).
523 Overview of changes in gcalctool 5.7.24
525 * Gcalctool now uses U+00F7 (DIVISION SIGN) instead of U+2215 (DIVISION SLASH)
526 for label on division button.
530 Overview of changes in gcalctool 5.7.23
532 * Released a gcalctool tarball for GNOME 2.13.5.
536 Overview of changes in gcalctool 5.7.22
538 * Fixed bug #323149. Gcalctool now uses the Unicode symbols for division,
539 multiplication, plus/minus, minus and square root.
543 Overview of changes in gcalctool 5.7.21
545 * Fixed bug #326344. The bit display of large numbers (in non-arithmetic
546 operator precedence mode with the scientific view) now hopefully works
551 Overview of changes in gcalctool 5.7.20
553 * Fixed bug #142824. Gcalctool no longer ignores locale specific numeric
554 point in arithmetic operator precedence mode.
556 * Adjusted all the copyright messages to include 2006.
560 Overview of changes in gcalctool 5.7.19
562 * Fixed bug #317378 (http://bugzilla.gnome.org/show_bug.cgi?id=317378)
563 Gcalctool no longer crashes when you double click the 0 in the display area.
567 Overview of changes in gcalctool 5.7.18
569 * Final fix for bug #153854. Now handles the case where the first thing
570 the user does is change mode (Basic, Financial, Advanced, Scientific)
573 * Released a gcalctool tarball for GNOME 2.13.4.
577 Overview of changes in gcalctool 5.7.17
579 * Fixed bug #323150. Sqrt (and other similar operations) no longer fail
580 in non-English locales
584 Overview of changes in gcalctool 5.7.16
586 * Fixed bug #324001. Primary Selection (middle mouse button) is now working.
590 Overview of changes in gcalctool 5.7.15
592 * Released a gcalctool tarball for GNOME 2.13.3.
596 Overview of changes in gcalctool 5.7.14
598 * More work on bug #153854. Similar change to that made on 15th November
599 2005, this time for arithmetic operator precedence mode.
603 Overview of changes in gcalctool 5.7.13
605 * Slight fixup for bug #157961. The toggling of the first bit in the
606 bit panel wasn't working correctly.
610 Overview of changes in gcalctool 5.7.12
612 * More work on bug #153854
613 If the user has completed a calculation and we are going to a
614 new mode that is "compatible" with this one, then just change
615 modes. Otherwise display a dialog warning the user that the
616 current calculation will be cleared.
618 Incompatible modes are:
621 Scientific -> Advanced
622 Scientific -> Financial
624 (unless we are in Scientific mode with Decimal numeric base and Fixed).
626 These changes work nicely in non-arithmetic operator precedence mode.
630 Overview of changes in gcalctool 5.7.11
632 * Released a gcalctool tarball for GNOME 2.13.2.
636 Overview of changes in gcalctool 5.7.10
638 * Fixed bug #316755. Gcalctool no longer has "Gdk-CRITICAL **:
639 gdk_window_invalidate_rect: assertion `window != NULL' failed"
644 Overview of changes in gcalctool 5.7.9
646 * Fixed bug #319934. The percent operator was broken in non-arithmetic
647 operator precedence mode.
651 Overview of changes in gcalctool 5.7.8
653 * Fixed bug #317378 (http://bugzilla.gnome.org/show_bug.cgi?id=317378)
654 Exponential notation now works correctly in arithmetic operator
659 Overview of changes in gcalctool 5.7.7
661 * Slight adjustment to the bit panel. It's now centralized.
665 Overview of changes in gcalctool 5.7.6
667 * Adjusted the mpcmim() routine in mp.c. The fix for Sun bug #4006391
668 needed to also preserve v->toclear and v->pointed.
670 * Work on enhancement request #157961. Started to implement the bit
671 panel for non-arithmetic precedence mode. It's automatically displayed
672 when in Scientific mode.
676 Overview of changes in gcalctool 5.7.5
678 * Implemented enhancement request #148104 for arithmetic precedence mode.
679 The modulo operation. See entry below for more details.
683 Overview of changes in gcalctool 5.7.4
685 * Fixed bug #316382. The "useless" cursor is no longer displayed in
686 the calculator display area.
690 Overview of changes in gcalctool 5.7.3
692 * Implemented enhancement request #148104 for non-arithmetic precedence
693 mode. Added in a modulo operation. This is available in Scientic Mode.
694 A Mod B return the remainder when you divide A by B. A and B must be
695 integers. Keyboard shortcut for this operation is "M".
699 Overview of changes in gcalctool 5.7.2
701 * Fixed bug #162453. The memory register dialog now uses GtkEntry widgets
702 to display the register values. Gnopernicus can now correctly speak the
703 contents of each memory register. There is also a close button to easily
708 Overview of changes in gcalctool 5.7.1
710 * Fixed bug #314540. The memory register window is now a dialog rather
711 than a top-level window.
715 Overview of changes in gcalctool 5.7.0
717 * Fix to prevent invalid numeric entry in arithmetic operator precedence
718 mode, depending upon the current base.
722 Overview of changes in gcalctool 5.6.31
724 * A number of the bison- and flex-related make rules in
725 .../gcalctool/Makefile.am were broken when builddir != srcdir.
729 Overview of changes in gcalctool 5.6.30
731 * Fixed bug #314540. The libparser.a library needs ranlib run on it
736 Overview of changes in gcalctool 5.6.29
738 * Fixed bug #314375. Replaced usage of malloc.h with stdlib.h in
743 Overview of changes in gcalctool 5.6.28
745 * Generated release for GNOME 2.12 (RC)
747 * Changed type of argument in paren_disp from char to int for 64bit.
751 Overview of changes in gcalctool 5.6.27
753 * Fixed bug #313255. The definitions for BUT_<n>_BAS in gtk.c were incorrect.
755 Overview of changes in gcalctool 5.6.26
757 * Generated release for GNOME 2.11.91 (beta2).
761 Overview of changes in gcalctool 5.6.25
763 * Fixed bug #311306. If the user was in View->Scientific with base Bin,
764 Oct or Hex and then went to View->Basic, then returned to View->Scientific,
765 some of the numeric keys were incorrectly greyed out.
769 Overview of changes in gcalctool 5.6.24
771 * Fixed bug #310849. Gcalctool no longer crashes when pressing the "B"
772 button (or typing Shift-B).
776 Overview of changes in gcalctool 5.6.23
778 * Fixed bug #310791. Memory register window view logic was screwed.
782 Overview of changes in gcalctool 5.6.22
784 * Fixed bug #310441. Adjusted code to compile with gcc 2.95.2.
788 Overview of changes in gcalctool 5.6.21
790 * Fixed bug #153854. When the user changes modes, a warning dialog is
791 displayed to let them know that their current display will be cleared
792 and the base reset to decimal. The user has the option of checking a
793 toggle box on the dialog, that will prevent this warning from being
798 Overview of changes in gcalctool 5.6.20
800 * Fixed bug #309294. Adjustments to allow gcalctool to successfully build
801 on Solaris with pkgconfig >= 0.17.1.
805 Overview of changes in gcalctool 5.6.19
807 * Fixed bug #309182. In non-arithmetic precdence mode, gcalctool can now
808 correctly change the sign of the exponent on scientific numbers again.
811 Overview of changes in gcalctool 5.6.18
813 * Fixed bug #308408. gcalctool can now correctly convert the hexadecimal
814 numbers "A-F" to other bases in "use arithmetic operator precedence mode".
818 Overview of changes in gcalctool 5.6.17
820 * Fixed bug #305619. Calculations with stored register values in arithmetic
821 operator precedence mode, now work correctly.
825 Overview of changes in gcalctool 5.6.16
827 * Fixed bug #305034. In "Use Arithmetic Precedence" mode, when switching
828 the format (e.g. from ENG to FIX), the displayed value switches to zero
829 (in the corresponding format, so e.g. 0.0 or 0e+0, ...).
833 Overview of changes in gcalctool 5.6.15
835 * Fixed bug #305467. gcalctool no longer crashes under the following
837 - type "f" to bring up the user function menu.
838 - dismiss the menu by clicking elsewhere with the mouse.
839 - type another character which isn't in the range "0" to "9".
843 Overview of changes in gcalctool 5.6.14
845 * Did a gcalctool tarball release.
849 Overview of changes in gcalctool 5.6.13
851 * Fixed bug #304056. Adjusted the keyboard shortcuts for the Xor and x^y
852 operations. New values are:
858 Overview of changes in gcalctool 5.6.12
860 * Fixed bug #302555. Various gcalctool variables have now been const'ified.
864 Overview of changes in gcalctool 5.6.11
866 * Fixed bug #300957. Replaced the underscore character in
867 "translator_credits" with a hyphen, to prevent some
868 translation tools from being confused.
872 Overview of changes in gcalctool 5.6.10
874 * More work on bug #172704.
875 - Adjusted the code to not try to display a menu when the user
876 entered a left parentheses (another do_pending() type of operation).
877 - Toggling the "Show Trailing Zeroes" operation via keyboard
878 shortcuts, needed to clear the v-.pending flag.
882 Overview of changes in gcalctool 5.6.9
884 * Fixed up some problems reported by lint.
888 Overview of changes in gcalctool 5.6.8
890 * Fixed bugs #172704 and #172869. When the user now uses the keyboard shortcut
891 for any of the gcalctool buttons that have a menu associated with them, that
892 menu is now displayed. The user can use the arrow keys to select a menu item
893 or the menu items shortcut.
897 Overview of changes in gcalctool 5.6.7
899 * Fixed bug #171393. Allow stock labels to show through.
903 Overview of changes in gcalctool 5.6.6
905 * Refixed bug #158280. The Help->Contents menu item no longer appears if
906 gcalctool is built Gtk-only.
910 Overview of changes in gcalctool 5.6.5
912 * Fixed bug #172798. gtk_set_locale was already being run by gtk_init()
913 and the gtk about popup didn't have the gcalctool icon.
917 Overview of changes in gcalctool 5.6.4
919 * Fixed Sun internal CR #6214176. If gcalctool is being driven by gok,
920 the on-screen keyboard assistive technology, it's possible that the
921 event returned by gtk_get_current_event() is NULL. If this is the
922 case, we need to fudge the popping up on the menu associated with
927 Overview of changes in gcalctool 5.6.3
929 * Fixed bug #158280. You can now build gcalctool without the GNOME
930 libraries by specifying "--disable-gnome" on the configure command
935 Overview of changes in gcalctool 5.6.2
937 * Fixed bug #167479. gcalctool with set the View->Memory Registers menu
938 item inactive if the calculator is in Basic mode.
942 Overview of changes in gcalctool 5.6.1
944 * Fixed bug #168694. gcalctool now saves/restores the ten memory
945 register values as gconf resources.
947 * Removed the redundant process_str() routine in graphics.c
951 Overview of changes in gcalctool 5.6.0
953 * Fixed bug #169196. gcalctool now uses use g_get_home_dir().
955 * Added in a better implementation of the trig_filter() routine in
960 Overview of changes in gcalctool 5.5.41
962 * Version for GNOME 2.10.0 (final) call for tarballs.
966 Overview of changes in gcalctool 5.5.40
968 * Version for GNOME 2.10.0 (rc1) call for tarballs.
972 Overview of changes in gcalctool 5.5.39
974 * Partial fix for bug 168385. "F+F=" wasn't working in arithmetic operator
979 Overview of changes in gcalctool 5.5.38
981 * Changes to make the trigonometric code work with hyp and inv properly.
985 Overview of changes in gcalctool 5.5.37
987 * Left and Right shift operations weren't working correctly. Menu
988 name comparison in mb_proc() in gtk.c was incorrect.
992 Overview of changes in gcalctool 5.5.36
994 * The fix for bug #162998 was incorrect when in Arithmetic Precedence mode.
995 * Exch functionality was incorrect in Arithmetic Precedence mode.
999 Overview of changes in gcalctool 5.5.35
1001 * Fixed bug 167124. One of the entries in the words[] array in
1002 syntax_translation.c was accidentally commented out.
1006 Overview of changes in gcalctool 5.5.34
1008 * Fixed bug 166634. Call to create the About box was missing a
1013 Overview of changes in gcalctool 5.5.33
1015 * Adjusted all copyright messages to be 2005.
1016 * Version for GNOME 2.10.0 (beta2) call for tarballs.
1020 Overview of changes in gcalctool 5.5.32
1022 * Fixed bug #165522. Made the status bar non-resizable.
1026 Overview of changes in gcalctool 5.5.31
1028 * Various code cleanups. It moves some declarations of static functions
1029 to the corresponding .c files. It also cuts down the number of
1030 included files, moving some includes to where they are needed from
1035 Overview of changes in gcalctool 5.5.30
1037 * Adjusted the About dialog to use the latest GtkAbout widget.
1041 Overview of changes in gcalctool 5.5.29
1043 * Version for GNOME 2.10.0 (beta1) call for tarballs.
1047 Overview of changes in gcalctool 5.5.28
1049 * Fixed bug #162998. The "menu" buttons in gcalctool now responds
1050 to the "clicked" event rather than the "button-press-event" to
1051 allow gok, the on-screen keyboard to function properly.
1053 * Fixed bug #159957. Input number in FIX mode now make mimimal changes
1054 to (i.e append a single character) the display rather than completely
1055 delete and insert it. The is helpful to assistive technologies like
1060 Overview of changes in gcalctool 5.5.27
1062 * Fixed bug #164184. Adjusted location of comments in syntax_translation.c
1063 so that the L10N message translation software isn't confused.
1067 Overview of changes in gcalctool 5.5.26
1069 * Fixed bug #163468. Pressing "(<Del>)" would cause gcalctool to crash.
1073 Overview of changes in gcalctool 5.5.25
1075 * Version for GNOME 2.9.4 call for tarballs.
1079 Overview of changes in gcalctool 5.5.24
1081 * Couldn't use the "#" key to select constants as this symbol was
1082 a lower-case symbol on his keyboard.
1084 * Powers that were a multiple of 30 (10 as well as 3) would not
1085 display correctly, having a 4 digit significand. Further testing
1086 showed that without the fix the following powers had a 4 digit
1087 significand: 27,30, 57,60, 90, 96 (and every 3 from here on).
1091 Overview of changes in gcalctool 5.5.23
1093 * Fixed bug #161976. configure.in now checks to make sure that atk >= 1.5
1097 Overview of changes in gcalctool 5.5.22
1099 * Fixed bug #155101. Made the gcalctool window resizable.
1103 Overview of changes in gcalctool 5.5.21
1105 * Version for GNOME 2.9.3 call for tarballs.
1109 Overview of changes in gcalctool 5.5.20
1111 * Fixed bug #160929. Removed the "Mode" word from each of the different
1112 mode menu items in the gcalctool View menu.
1116 Overview of changes in gcalctool 5.5.19
1118 * Fixed bug #157701. gcalctool can now use real multiplication and division
1119 symbols instead of "*" and "/".
1123 Overview of changes in gcalctool 5.5.18
1125 * Fixed bug #160088. Adjusted the titlebar text so that it doesn't include
1126 the word "Mode" which was getting chopped when the calculator was in
1131 Overview of changes in gcalctool 5.5.17
1133 * Fixed bug #157962. Added in a set of three colors for gcalctool that
1134 will work with the default theme. To use them, the "gcalctoolrc" file
1135 supplied with the source distribution needs to be moved to ~/.gcalctoolrc
1139 Overview of changes in gcalctool 5.5.16
1141 * Generated gcalctool tarball for the GNOME 2.9.2 release.
1145 Overview of changes in gcalctool 5.5.15
1147 * Adjusted the scroll_right() routine to only scroll right if the
1148 horizontal scroll bar is visible.
1152 Overview of changes in gcalctool 5.5.14
1154 * Fixed bug #158357. Removed the -DGNOME_DISABLE_DEPRECATED and the
1155 -DGTK_DISABLE_DEPRECATED flags from the INCLUDES definition in
1156 .../gcalctool/Makefile.am for now, to allow it to successfully build
1157 against the latest GNOME/Gtk+.
1159 * Slight adjustment to correct check the Advanced mode menu item when
1160 the user had previously terminated gcalctool in that mode.
1164 Overview of changes in gcalctool 5.5.13
1166 * Changed the names of the gconf mode type key so that there is backward
1169 * Reset the initial default mode to BASIC.
1173 Overview of changes in gcalctool 5.5.12
1175 * Fixed bug #157757. The horizontal scrollbar for the display area will
1176 now only be visible when needed. It will also display the rightmost part
1177 of the display as you are entering new input.
1181 Overview of changes in gcalctool 5.5.11
1183 * Added in a very basic mode for gcalctool. Rather than calling this a
1184 "Light" mode, the existing "Basic" mode is now renamed to "Advanced"
1185 and the new basic mode is called "Basic".
1189 Overview of changes in gcalctool 5.5.10
1191 * Fix for bug #157021. X^Y now works for -X with integer Y. -X with
1192 non-integer Y will now display a descriptibe error in the status bar.
1196 Overview of changes in gcalctool 5.5.9
1198 * Generated gcalctool tarball for first GNOME 2.9 release.
1202 Overview of changes in gcalctool 5.5.8
1204 * Slight adjustment to bug #152301. The tooltip message had been tweaked to
1205 "Show the About Gcalctool dialog".
1209 Overview of changes in gcalctool 5.5.7
1211 * Fixed bug #152301. Adjusted the tooltip message for Help->About... from
1212 "Show about help" to "Show the about dialog", to make it more understandable.
1216 Overview of changes in gcalctool 5.5.6
1218 * Fixed bug #153726. Gcalctool will now build correctly when using the
1219 -fno-common option for gcc (3.3.4).
1223 Overview of changes in gcalctool 5.5.5
1225 * Numerical answer localization and thousand separator support for
1226 arithmetic precedence mode.
1228 * If the accuracy was changed via one of the ten preset menu items in the
1229 Acc menu, the tooltip wasn't getting correct updated with the new accuracy.
1233 Overview of changes in gcalctool 5.5.4
1235 * Further changes to the "Set Precision" popup (rfe #147803):
1236 - "Significant places" not "Significant Places".
1237 - Change "Set Precision..." to be "Other (12) ..." (where "(12)" is the
1238 current precision, and be in the same radio box group as the other menu
1239 items. Check the appropriate menu entry.
1240 - Adjust the Acc button tooltip to show the current accuracy too.
1241 - When the user attempts to enter an invalid entry in the Set Precision
1242 popup, an error message is shown in the main gcalctool status bar.
1243 - the other Acc radio button items (0-9) need to have mnemonics (_0, _1 ...).
1245 * Fixed bug #152790. Most of the changes needed were already in CVS; there
1246 was one compiler warning that still needed to be removed.
1248 * Storing the display value to a memory register was not updating the memory
1249 register window, if it was visible.
1253 Overview of changes in gcalctool 5.5.3
1255 * Added in functionality to set the number of significant places > 9.
1256 There is a new menu item under the Acc menu called "Set Precision..."
1257 that brings up a small popup allowing you to set precision between 0
1258 and MAXACC significant places (where MAXACC is currently 30).
1262 Overview of changes in gcalctool 5.5.2
1264 * Fixed up numerous warnings generated by running lint on the gcalctool code.
1265 Removed unused variables and functions. Declared routines statically where
1270 Overview of changes in gcalctool 5.5.1
1272 * Fixed bug 148581. Changes to get latest gcalctool compiling on a BSD system.
1276 Overview of changes in gcalctool 5.5.0
1278 * Major new release of gcalctool. Incorporates an arithmetic operator
1279 precedence mode (currently the default while it's been debugged). To get
1280 the old style, uncheck View->Use Arithmetic Precedence from the menu bar.
1281 * The "(" and ")" buttons have moved from the scientific mode into the
1282 Basic mode so that they are now available to users who need them but not
1283 everything that the Scientific mode provides.
1284 * There is a footer message area that provides feedback.
1285 * The display area now has an horizontal scrollbar.
1286 * Typing in the keyboard shortcuts for the various gcalctool buttons
1287 autocompletes their entry into the display area.
1288 * Tooltips show button's shortcut.
1292 Overview of changes in gcalctool 4.4.13
1294 * Remainder of the fix for bug #143924. Control-T shouldn't work in Basic
1299 Overview of changes in gcalctool 4.4.12
1301 * Partial fix for bug #143924. After an error condition, the "Show
1302 Trailing Zeroes" menu item is only activated if the user is in
1307 Overview of changes in gcalctool 4.4.11
1309 * Fixed bug 138106. In Basic or Financial mode, "Error" was been
1310 incorrectly display if you user has "Show Thousands Separator" set.
1314 Overview of changes in gcalctool 4.4.10
1316 * Fixed bug 144031. gcalctool checked for the presence of the X11
1317 libraries but doesn't need to.
1321 Overview of changes in gcalctool 4.4.9
1323 * Selecting Help->About from the menubar now works again.
1327 Overview of changes in gcalctool 4.4.8
1329 * Adjusted the creation of the menubar and the Accuracy and Left/Right
1330 shift menus from GtkItemFactory to GtkUIManager.
1334 Overview of changes in gcalctool 4.4.7
1336 * Fixed bug 142824. gcalctool now correctly recognizes the localized
1337 decimal point character.
1341 Overview of changes in gcalctool 4.4.6
1343 * Fixed bug 129397. Use GtkIconTheme to load gcalctool icon instead of
1348 Overview of changes in gcalctool 4.4.5
1350 * Fixed bug 142888. Gcalctool is now connected to the "die" signal so
1351 that it can be successfully terminated when removed from
1352 gnome-session-properties.
1356 Overview of changes in gcalctool 4.4.4
1358 * The "Bsp" button label has been changed to "Bksp" to make it more
1363 Overview of changes in gcalctool 4.4.3
1365 * Fixed bug 138106. If the "Error" message is being displayed, it is now
1366 no longer incorrectly displayed as "Er,ror" if the "Show Thousands
1371 Overview of changes in gcalctool 4.4.2
1373 * Fixed bug 135068. Adjusted several default constant descriptions to be
1374 more understandable.
1378 Overview of changes in gcalctool 4.4.1
1380 * Fixed bug 135065. Tooltips for OR, AND, NOT, XOR and XNOR have been
1381 changed from "Logical <whatever>" to "Bitwise <whatever>".
1385 Overview of changes in gcalctool 4.4.0
1387 * Fixed bug 136872. gcalctool can now be built with "CFLAGS=-fdata-sections".
1391 Overview of changes in gcalctool 4.3.51
1393 * Version for GNOME 2.6 (FINAL) call for tarballs. Includes:
1394 - new locales for pa, en_GB, bg and ga.
1395 - localized online user documentation from the Sun translation team.
1396 for de, es, fr, it, ja, ko, sv, zh_CN, zh_HK and zh_TW.
1400 Overview of changes in gcalctool 4.3.50
1402 * One more slight adjustment to the fix for bug 135064.
1403 Entering numbers that start with the numeric point character ('.")
1404 are now visibly displayed.
1408 Overview of changes in gcalctool 4.3.49
1410 * Adjustment to the fix for bug 135064. Fix to remove a potential spurious
1411 initial thousands separator character after a change sign operation.
1415 Overview of changes in gcalctool 4.3.48
1417 * Fixed bug 135064. Changing the sign of a large number (when "Show
1418 Thousands Separator" is on and this is not the C locale), no longer
1419 corrupts the display.
1423 Overview of changes in gcalctool 4.3.47
1425 * Fixed bug 135328. Added Shift-slash as a recognized alternate for the
1426 divide operation (needed by the be-latin1 keyboard layout).
1430 Overview of changes in gcalctool 4.3.46
1432 * Fixed bug 134540. gcalctool now correctly handles the digits 0123456789
1433 which are shifted about the accented characters on a French keyboard.
1437 Overview of changes in gcalctool 4.3.45
1439 * Fixed bug 134484. Doing "3 x! x! x!" no longer causes gcalctool to lock up.
1443 Overview of changes in gcalctool 4.3.44
1446 - "Gradients" was still appearing when in Scientific mode (instead of
1448 - In the x^2 button, the 2 should not be italicized.
1449 - In the x^2 and x^y buttons, the x should be italicized.
1450 - The View Thousands Separator menu item should not remain active during
1455 Overview of changes in gcalctool 4.3.43
1457 * Fixed bug 133590. The About box now lists the documenters of gcalctool.
1461 Overview of changes in gcalctool 4.3.42
1463 * Fixed bug 132582. Adjusted the gcalctool titlebar to use a hyphen
1464 (rather than square brackets) to show what mode the user is currently
1469 Overview of changes in gcalctool 4.3.41
1471 * Fixed bug 132570. Adjusted UI to use spacing to delineate groups rather
1472 than frames (per the HIG).
1476 Overview of changes in gcalctool 4.3.40
1478 * Fixed bug 131571. User defined constants are now read/written out (as
1479 gconf resources) with no thousands separator and with a radix of ".".
1483 Overview of changes in gcalctool 4.3.39
1485 * Fixed bug 131594. The "Insert ASCII View..." menu item and the
1486 "Insert" button no longer use the GTK_STOCK_CONVERT stock icon
1491 Overview of changes in gcalctool 4.3.38
1493 * Fixed bug 131059. Fix to allow the thousands separator to be used
1494 correctly with the creation of the initial constant values in the
1499 Overview of changes in gcalctool 4.3.37
1501 * Fixed bug 130078. Changed the y^x button label to x^y (really x
1502 superscript y). Adjusted the tooltip message to "Raise displayed
1503 value to the power of y".
1507 Overview of changes in gcalctool 4.3.36
1509 * Fixed bug 130282 again. Needed to remove the "|| tsep[0] == '\0'" check
1510 from the get_tsep() routine in order to get the thousands separator to
1511 correctly work in all locales. Note that there is no thousands separator
1512 now for the C locale.
1516 Overview of changes in gcalctool 4.3.35
1518 * Fixed part of bug 126125. If the user entered: "1+(2()<backspace>)",
1519 this resulted in an answer of 0.
1523 Overview of changes in gcalctool 4.3.34
1525 * Fixed bug 130187. When gcalctool changes modes now, it's internal state
1526 and the display are cleared.
1530 Overview of changes in gcalctool 4.3.33
1532 * Fixed bug 130282. Fixes for more problems with the thousands separator
1533 in certain locales, plus correct handling of the radix character with
1534 the initial constant values.
1538 Overview of changes in gcalctool 4.3.32
1540 * Fixed bug 128603 again. The solution this time was to duplicate the
1541 initial string constant values to be confident that they are not in
1546 Overview of changes in gcalctool 4.3.31
1548 * Fixed bug 129539. The thousands separator is a null terminated string,
1549 not a single character. Same for the radix.
1553 Overview of changes in gcalctool 4.3.30
1555 * Fixed bug 129496. "Gradients" should be "Gradians".
1559 Overview of changes in gcalctool 4.3.29
1561 * Fixed bug 128603. The changes for enhancement request #126626 which added
1562 thousands separator support caused a crash at startup time on a Debian
1563 system. The initial constant strings are being put in read-only memory
1564 either by gcc (or because of the way that x86 arch is designed). This was
1565 not a problem when tested with the Sun compilers on a Solaris SPARC machine.
1566 The remove_tsep() routine is display.c has been rewritten to correctly
1571 Overview of changes in gcalctool 4.3.28
1573 * Further work on enhancement request 125873. As the user is typing in
1574 input, the display will now show the thousands separator (if checked).
1578 Overview of changes in gcalctool 4.3.27
1580 * On a Solaris keyboard, Shift-"^" is GDK_asciicircum/GDK_SHIFT_MASK.
1581 This keyval/state pair needed to be added to the Xor recognized mappings.
1585 Overview of changes in gcalctool 4.3.26
1587 * Re-fixed bug 127672. The fix for Shift-"=" should have been for GDK_equal
1588 not GDK_Return. Needed to add in support for Shift-"/" too.
1592 Overview of changes in gcalctool 4.3.25
1594 * Implemented enhancement request 125873. gcalctool can now optionally
1595 show the thousands seperator character for fixed point numbers displayed
1596 in the decimal base. Same for numbers stored in the memory registers.
1597 There is a new "Show Thousands Separator" menu entry in the View menu
1602 Overview of changes in gcalctool 4.3.24
1604 * Fixed bug 126626. gcalctool no longer causes a Gtk-CRITICAL error when
1605 the user enters "9*(1<Xor>". The problem was caused because a non-UTF
1606 character was being inserted into the text string to be displayed for
1611 Overview of changes in gcalctool 4.3.23
1613 * Fixed bug 125782. If the user is entering a left parenthesis and it is
1614 the first one being displayed and there is no current arithmetic operand,
1615 then the current display is initially cleared to avoid the confusion of
1616 showing something like "0(".
1620 Overview of changes in gcalctool 4.3.22
1622 * Fixed bug 127862. The fix for bug #125625 introduced a potential
1623 out-of-order case for users who are rapid keyboard typers. This
1624 bug fix rectifies this with the unfortunate side-effect of no longer
1625 visual toggling the equivalent button to the keyboard character
1626 that the user entered. This fix is still compatible with the way
1627 the accessibility infrastructure works though.
1631 Overview of changes in gcalctool 4.3.21
1633 * Fixed bug 65806. For the "1/x", "x^2", "x!", "e^x", "10^x" and
1634 "y^x" labels, all occurances of "x" and "y" are now italicized.
1635 The "e" in "e^x" is no longer italicized.
1639 Overview of changes in gcalctool 4.3.20
1641 * Fixed bug 127316. The "fix" introduced in gcalctool v4.1.18 to fix Sun
1642 Bugtraq bug #1258472 against CDE dtcalc (which was also a problem with
1643 gcalctool) was incorrect.
1647 Overview of changes in gcalctool 4.3.19
1649 * Fixed bug 127672. The "=" key on a Swedish keyboard is on the upper
1650 level of a key (i.e. the Shift key needs to be down). Added another
1651 mask/keysym pair to the "=" entry to handle this.
1655 Overview of changes in gcalctool 4.3.18
1657 * Fixed bug 125625. gcalctool now handles "clicked" events rather than
1662 Overview of changes in gcalctool 4.3.17
1664 * Fixed bug 124928. Plugged several memory leaks.
1668 Overview of changes in gcalctool 4.3.16
1670 * Fixed bug 124377. Fixed rounding errors when the radix character for a
1672 * Online help updated for various recent (small) changes.
1676 Overview of changes in gcalctool 4.3.15
1678 * Fixed bug 124172. The "+" character on a German keyboard is on the lower
1679 level of a key (i.e. the Shift key doesn't need to be down). Added another
1680 mask/keysym pair to the "+" entry to handle this.
1684 Overview of changes in gcalctool 4.3.14
1686 * Fixed bug 120737. Changed the accessible text for the OR button from
1687 "Logical OR" to "logical OR" so that it's not changed by FreeTTS's
1688 token to words module to "logical Oregon".
1692 Overview of changes in gcalctool 4.3.13
1694 * Fixed bug #123948. Removed the GTK_DISABLE_DEPRECATED flag from
1695 .../gcalctool/gcalctool/Makefile.am, to allow the depreciated
1696 GtkItemFactory, to successfully build.
1700 Overview of changes in gcalctool 4.3.12
1702 * Fixed bug 123724. Hitting Esc now does the same as hitting
1703 Control-Backspace; i.e. the CE (clear entry) functionality.
1704 * Updated the gcalctool man pages to reflect this change, and the changes
1709 Overview of changes in gcalctool 4.3.11
1711 * Refixed bug 122373. gcalctool now uses nl_langinfo() to get the numeric
1712 point for the users locale, rather than via a localised string.
1716 Overview of changes in gcalctool 4.3.10
1718 * Fixed enhancement #65806. Changed that label for e^x (e superscript x) to
1719 use an italised "e".
1723 Overview of changes in gcalctool 4.3.9
1725 * Fixed bug 118826. The keyboard shortcuts for the six hex. digits are
1726 now "A" to "F". The functions that previously used those letters have
1727 been reassigned to their lowercase equivalents.
1731 Overview of changes in gcalctool 4.3.8
1733 * Fixed bug 122408. The tooltips for the numeric buttons (0-9) have been
1734 removed as they are redundant.
1738 Overview of changes in gcalctool 4.3.7
1740 * Fixed bug 120749. When gcalctool is displaying a menu, typing Alt+Tab
1741 can no longer switch windows.
1745 Overview of changes in gcalctool 4.3.6
1747 * Fixed bug 120745 (http://bugzilla.gnome.org/show_bug.cgi?id=120745)
1748 Accessible names have now been added to each of the widgets in the
1749 mode panel when in Scientific mode.
1753 Overview of changes in gcalctool 4.3.5
1755 * Fixed bug 122373. The decimal separator is now a translatable string so
1756 that other locales that don't use a period can adjust accordingly.
1760 Overview of changes in gcalctool 4.3.4
1762 * Fixed bug 120605. Gcalctool debug messages are no longer translatable
1767 Overview of changes in gcalctool 4.3.3
1769 * Build for GNOME 2.4 (Final). Tag in CVS is GCALCTOOL_4_3_3
1773 Overview of changes in gcalctool 4.3.2
1775 * Fixed bug 119888. gcalctool keyboard handling has been improved.
1779 Overview of changes in gcalctool 4.3.1
1781 * Fixed bug 119832. The space bar can now correctly activate the button
1786 Overview of changes in gcalctool 4.3.0
1788 * Build for GNOME 2.4 (Beta1). Tag in CVS is GCALCTOOL_4_3_0
1792 Overview of changes in gcalctool 4.2.104
1794 * Fixed bug 118246. The display field can now take focus. The initial
1795 widget with focus is the Clr button.
1799 Overview of changes in gcalctool 4.2.103
1801 * (Bug #118247) Three more small adjustments to AccessibleName text:
1802 "E to the power of x" goes back to "E to the x"
1803 "Ten to the power of x" goes back to "Ten to the x"
1804 "Y to the power of x" goes back to "Y to the x"
1808 Overview of changes in gcalctool 4.2.102
1810 * (Bug #118247) Four small adjustments to AccessibleName text:
1811 "Random" becomes "Random number"
1812 "E to the x" becomes "E to the power of x"
1813 "Ten to the x" becomes "Ten to the power of x"
1814 "Y to the x" becomes "Y to the power of x"
1818 Overview of changes in gcalctool 4.2.101
1820 * Fixed bug 118247. Each gcalctool button now has an AccessibleName.
1824 Overview of changes in gcalctool 4.2.100
1826 * Fixed bug 117691. The GDK_Up, GDK_Down, GDK_Left and GDK_Right keysyms are
1827 not valid equivalents for the 8, 2, 4 and 6 keys. They are needed for
1828 keyboard navigation.
1832 Overview of changes in gcalctool 4.2.99
1834 * Bumped version number for GNOME 2.3.4 release, to include John's doc
1839 Overview of changes in gcalctool 4.2.98
1841 * Fixed bug 116944. Various HIG improvements to the edit constants, edit
1842 functions, and insert ASCII value dialogs.
1846 Overview of changes in gcalctool 4.2.97
1848 * Further work on bug 116727. A simpler fix was found.
1852 Overview of changes in gcalctool 4.2.96
1854 * Fixed bug 116727. When the calculator display is showing an error message,
1855 it is now correctly localized.
1859 Overview of changes in gcalctool 4.2.95
1861 * Fixed bug 115950. The "*" key wasn't being recognized as a keyboard
1862 shortcut for multiplication.
1866 Overview of changes in gcalctool 4.2.94
1868 * Further work on bug 114364. The items in the constants menu are now always
1869 displayed in the decimal numeric base. This is consistent with the way that
1870 calctool in the OpenWindows DeskSet worked.
1874 Overview of changes in gcalctool 4.2.93
1876 * Fixed bug 114364. When you select "Edit Constants" from the Con menu, the
1877 values of each constant are shown in Decimal. The label:
1878 "All constant values are specified in the decimal numeric base"
1879 has also been added to the "Edit Constant" popup to clarify this.
1883 Overview of changes in gcalctool 4.2.92
1885 * Fixed bug 115653. Adjusted the keyboard mnemonic checking code to now
1886 check to make sure that neither of the Alt keys is pressed when comparing
1887 against button equivalents.
1891 Overview of changes in gcalctool 4.2.91
1893 * Similar problem to bug #115212 but for the "Edit Constants" and
1894 "Edit Functions" dialog boxes. gcalctool no longer can display
1895 multiple versions of them.
1899 Overview of changes in gcalctool 4.2.90
1901 * Fixed bug 114363 (http://bugzilla.gnome.org/show_bug.cgi?id=114363)
1902 When an error condition occurs:
1904 - make insensitive all buttons except Clr.
1905 - make all Scientific mode toggles and checkboxes insensitive.
1906 - make all menubar items insensitive except:
1910 When the error condition is cleared, resensitise everything, setting
1911 the numeric base buttons correctly.
1915 Overview of changes in gcalctool 4.2.89
1917 * Fix for bug #115212. gcalctool no longer can display multiple About boxes.
1921 Overview of changes in gcalctool 4.2.88
1923 * Fix for bug #108209. The appropriate gcalctool button is now animated
1924 when the user enters that value via the keyboard.
1928 Overview of changes in gcalctool 4.2.87
1930 * Partial fix for bug 114363. When the calculator display is showing "Error",
1931 the Constant values and the Memory Register values no longer incorrectly
1932 show "Error" as well.
1936 Overview of changes in gcalctool 4.2.86
1938 * Fixed bug 113703. You can now specify an alternate location for
1939 the gcalctool schemas file with: --with-gconf-source=whatever
1943 Overview of changes in gcalctool 4.2.85
1945 * Fixed bug 113754. Decimal point didn't work with a German keyboard if
1946 Numlock was turned on.
1950 Overview of changes in gcalctool 4.2.84
1952 * Install "gnome-calculator" symlink as reqested by Glynn Foster.
1956 Overview of changes in gcalctool 4.2.83
1958 * Fixed Bugzilla bug 111269. It was possible to type fast into gcalctool
1959 and digits would be transposed.
1963 Overview of changes in gcalctool 4.2.82
1965 * Refixed bug 110416. Concatenated more error messages in mp.c.
1966 * Adjusted the Acc menu entries to be "<n> significant places" rather than
1968 * Replaced "kilometers per hour / miles per hour" with "kilometers per hour
1969 or miles per hour" in the first constant description.
1970 * Replaced occurances of "/" in the other constant descriptions with "or".
1974 Overview of changes in gcalctool 4.2.81
1976 * Translators: The documentation is now ready for translation!
1978 * Updated the following files:
1979 * configure.in: updated version number to 4.2.81
1980 * help/C/gcalctool.xml: first approved draft, ready for translation
1981 * help/C/gcalctool-C.omf: updated manual date and version number
1982 * help/C/l10n.txt: new file added
1983 * help/C/figures/gcalctool_edit_const_window.png: deleted
1984 * help/C/figures/gcalctool_edit_func_window.png: deleted
1985 * help/C/figures/gcalctool_ins_ascii_window.png: deleted
1986 * help/C/figures/gcalctool_mem_reg_window.png: deleted
1990 Overview of changes in gcalctool 4.2.80
1992 * Fixed Bugzilla bug 110416. Various fprintf statements in mp.c have been
1993 concatenated to help translators.
1997 Overview of changes in gcalctool 4.2.79
1999 * Added in latest online help changes from Breda McColgan. This should now
2000 put the online help in sync with the actual functionality of gcalctool.
2004 Overview of changes in gcalctool 4.2.78
2006 * Made translated menu entries actually visible. fixed some tooltips, added
2007 AC_PREREQ macro to configure.in.
2011 Overview of changes in gcalctool 4.2.77
2013 * This version announced on gnome-announce.
2017 Overview of changes in gcalctool 4.2.76
2019 * Slight adjustments to Bugzilla bug 108226 . Menu item is now
2020 "Show Trailing Zeroes", with a Control-T accelerator. Added a similar
2021 menu item to the View menu on the menu bar.
2025 Overview of changes in gcalctool 4.2.75
2027 * Fixed Bugzilla bug 108729.
2029 Added tooltips to the radio and check buttons in scientific mode.
2033 Overview of changes in gcalctool 4.2.74
2035 * Fixed Bugzilla bug 108226.
2037 The menu items in the Acc menu are now "tickable", so you know what the
2038 current accuracy selection is. Setting one of these clears the previous one.
2040 A new "remove trailing zeroes" menu item is added to the Acc menu (last
2041 item, with a separator just above), that is "tickable". This tick doesn't
2042 affect the accuracy ticks. It's either on or off.
2044 The default setting for accuracy now becomes 9 numeric places and "remove
2047 The Acc button is moved to the Scientific mode (clear slot in the top
2048 right corner, above the Rand.
2050 The Base radio button group and the display type radio button group in
2051 the mode panel in Scientific mode are now moved to the right side to be
2052 close in proximity to the Acc button. The other mode items move to the
2057 Overview of changes in gcalctool 4.2.73
2059 * Fixed Bugzilla bug 108208. The default value for the "showregisters"
2060 resource in gcalctool.schemas was incorrectly set.
2061 * There should be no "default:" action in the command line parsing in
2066 Overview of changes in gcalctool 4.2.72
2068 * Correctly fixed Bugzilla bug 108219. The previous fix didn't correct
2069 set the radio buttons when changing mode from Scientific to Basic or
2070 Financial. Only the internal state.
2074 Overview of changes in gcalctool 4.2.71
2076 * Further fix for Bugzilla bug 108209. Followup changes to make the numeric
2077 keypad animate the buttons on Linux machines.
2081 Overview of changes in gcalctool 4.2.70
2083 * Fixed Bugzilla bug 108219.
2084 When you go from Scientific mode to either Basic or Financial mode,
2085 the calculator will revert to "Dec" base in "Fix" notation.
2086 Any number in the display (and the memory registers if shown) will be
2087 converted accordingly.
2088 When you are in a mode (Basic, Financial, or Scientific) you will only
2089 be able to do the functionality that that mode shows.
2093 Overview of changes in gcalctool 4.2.69
2095 * Fixed Bugzilla bug 108333. The gcalctool buttons with menus associated
2096 with them are now keyboard navigable.
2100 Overview of changes in gcalctool 4.2.68
2102 * Fixed Bugzilla bug 108209. When the user uses the keyboard to enter data,
2103 the associated gcalctool button will be animated.
2107 Overview of changes in gcalctool 4.2.67
2109 * Fixed Bugzilla bug 108210. Main gcalctool window is no longer resizable.
2113 Overview of changes in gcalctool 4.2.66
2115 * Incorporated various changes to the online help Breda McColgan in
2116 the Sun GNOME doc. team. Translators, please do not translate yet.
2117 See ChangeLog for more information.
2121 Overview of changes in gcalctool 4.2.65
2123 * Added scrollkeeper checks into configure.in.
2124 * Fixed warning message:
2126 ** (gcalctool:27091): WARNING **: Help error: Unable to find the
2127 GNOME_FILE_DOMAIN_APP_HELP domain
2131 Overview of changes in gcalctool 4.2.64
2133 * Added in a first (draft) version of online help from Breda McColgan in
2134 the Sun GNOME doc. team. Translators, please do not translate yet. See
2135 ChangeLog for more information.
2139 Overview of changes in gcalctool 4.2.63
2141 * Abstracted the key values and modifiers.
2145 Overview of changes in gcalctool 4.2.62
2147 * Adjusted the tooltip help to be minimalist messages.
2151 Overview of changes in gcalctool 4.2.61
2153 * Small adjustment to allow gcalctool to compile using the Solaris Forte
2158 Overview of changes in gcalctool 4.2.60
2160 * Gcalctool wasn't saving the trigonometric type when it was changed.
2164 Overview of changes in gcalctool 4.2.59
2166 * Added Brazilian Portuguese (pt_BR) to ALL_LINGUAS.
2170 Overview of changes in gcalctool 4.2.58
2172 * Allows Backspace to now correctly work inside parentheses.
2176 Overview of changes in gcalctool 4.2.57
2178 * The Xor logical operation wasn't being performed correctly.
2179 * Hitting Clr was not correctly clearing the Hyp and Inv trigonometric
2184 Overview of changes in gcalctool 4.2.56
2186 * Removed the final period from the ten default constant descriptions.
2187 * Changed occurances of "kilometre" to "kilometer" and "centimetre" to
2189 * Fixed up the values of the ten default constant definitions in the
2191 * The "centimeters <=> inches" default constant should be 0.3937007
2192 rather than 2.54 to be consistent with the other constants.
2196 Overview of changes in gcalctool 4.2.55
2198 * Entering "(<Delete>)" no longer crashes gcalctool.
2202 Overview of changes in gcalctool 4.2.54
2204 * The financial Term tooltip example now works.
2205 * Moved the Exp button to the right of the Con and Fun buttons for better
2210 Overview of changes in gcalctool 4.2.53
2212 * Fixed Bugzilla bug 106501. Added bullet proofing to prevent user
2213 backspacing off the end of the display string.
2217 Overview of changes in gcalctool 4.2.52
2219 * Toggled the positions of the Sto and Rcl buttons.
2223 Overview of changes in gcalctool 4.2.51
2225 * No longer crashes if the user Pastes in an empty clipboard value.
2226 * Now uses a text view for its display widget.
2230 Overview of changes in gcalctool 4.2.50
2232 * Fixes to the manual page:
2233 - the keyboard shortcut for the "Term" function is "t" not "T".
2234 - removed the LOGICAL mode section.
2238 Overview of changes in gcalctool 4.2.49
2240 * The display label and mode no longer expand when the calculator is resized.
2241 * Replace the three characters of white space in the title bar text with one
2242 space character, so more of the title fits into the task window list applet.
2244 Overview of changes in gcalctool 4.2.48
2246 * Added a launcher to the GNOME's Accessories menu.
2250 Overview of changes in gcalctool 4.2.47
2252 * Marks the menu labels for translation.
2256 Overview of changes in gcalctool 4.2.46
2258 * Various cleanup, to make gcalctool be more like other GNOME applications.
2262 Overview of changes in gcalctool 4.2.45
2264 * Fixed Bugzilla bug 104249. The UI for adding new or editing existing
2265 constants and/or functions has been improved.
2269 Overview of changes in gcalctool 4.2.44
2271 * Fixed Bugzilla bug 104830. gcalctool now uses gnome-calc3.png as its icon
2272 (same as the current gnome-calculator)
2276 Overview of changes in gcalctool 4.2.43
2278 * Further slight adjustments needed to fix Bugzilla bug 104248. The memory
2279 registers window now displays correctly again.
2280 * Fixed Bugzilla bug 104240. The "File" menubar item is now called
2281 "Calculator", and there is a set of unique mnemonics for the various
2282 items in the Scientific mode panel. The gcalctool manual pages have been
2283 updated to reflect these changes.
2284 * Added in a Control-I mnemonic for Edit->Insert ASCII Value.
2285 Added in a Control-A mnemonic for Help->About.
2289 Overview of changes in gcalctool 4.2.42
2291 * Fixed Bugzilla bug 104248. The View->Memory Registers menu item's toggle
2292 is now set correctly depending upon whether the memory register windows
2293 is visible or hidden.
2294 * The correct radio item is now set in the View menu mode menu item entries
2295 if gcalctool is initially started in Financial or Scientific mode.
2299 Overview of changes in gcalctool 4.2.41
2301 * The constant and function definitions are now read and written as Gconf
2303 * Fixed Bugzilla bug 104250. The constant and the function menu items now
2304 have "C<n>:" and "F<n>:" prefixes respectively, where <n> is the
2305 constant/function number.
2309 Overview of changes in gcalctool 4.2.40
2311 * Fixed Bugzilla bug 104245. The View->Basic Mode, Financial Mode,
2312 Scientific Mode and Memory Registers now have keyboard accelerators
2313 (Control-B, Control-F, Control-S and Control-M respectively).
2317 Overview of changes in gcalctool 4.2.39
2319 * Further slight adjustments for Bugzilla bug 104287
2320 The insert button isthe default button.
2321 The dialog is no longer resizable.
2322 The ESC key can now be used to cancel the dialog.
2326 Overview of changes in gcalctool 4.2.38
2328 * Fixed Bugzilla bug 104287. HIG improvements for the "Insert ASCII Value"
2333 Overview of changes in gcalctool 4.2.37
2335 * Fixed Bugzilla bug 104241. The Insert ASCII Value" menu item is now
2336 "Insert ASCII Value..."
2337 * Tidied up the I18N code as gcalctool now includes <gnome.h> which includes
2338 <bonobo-i18n.h,> where all this stuff is already defined.
2342 Overview of changes in gcalctool 4.2.36
2344 * Fixed Bugzilla bug #102928. The x^2, e^x, 10^x and y^x keys now use
2345 Pango markup to display the label using superscripts.
2349 Overview of changes in gcalctool 4.2.35
2351 * Added in handling of the numeric keypad for Linux systems.
2355 Overview of changes in gcalctool 4.2.34
2357 * Handling of the users saved function definitions now works correctly.
2358 * Changed the keyboard accelerators for the following to use non Alt-<?>
2361 Cos (old value: Alt-c) becomes 'J'.
2362 Sin (old value: Alt-s) becomes 'K'.
2363 Tan (old value: Alt-t) becomes 'L'.
2364 Frac (old value: Alt-f) becomes ':'.
2365 Int (old value: Alt-i) becomes 'i'.
2366 Abs (old value: Alt-u) becomes 'u'.
2367 Rate (old value: Alt-r) becomes 'T'.
2368 * Removed the need to configure with "--enable-build-broken".
2372 Overview of changes in gcalctool 4.2.33
2374 * Adjusted the memory registers windows to use the same "R0: 0.00" format
2375 (bold for first part), as the Rcl, Sto and Exch menus.
2379 Overview of changes in gcalctool 4.2.32
2381 * The menu items for the Rcl, Sto and Exch menus now have the format
2382 "R0: 0.00", where the "R0:" part is in bold.
2383 * The keyboard accelerators for the menubar menu items are now working.
2387 Overview of changes in gcalctool 4.2.31
2389 * Updated the NEWS file with an overview of all the changes since v4.1.13.
2393 Overview of changes in gcalctool 4.2.30
2395 * Removed the gconf resource for getting/setting whether a beep is sounded
2396 on error. A beep will now always be sounded in such a case.
2397 * The writing out of the resources will now be immediately done when each
2398 of those functions changes.
2402 Overview of changes in gcalctool 4.2.29
2404 * Updated the manual pages to reflect the recent v4.2.xx changes.
2405 * Replaced the occurance of mktemp with mkstemp to placate the Gnu compiler
2410 Overview of changes in gcalctool 4.2.28
2412 * The real fix for displaying the icon.
2416 Overview of changes in gcalctool 4.2.27
2418 * Vastly improved keyboard navigation.
2419 * Control-F1 now toggles the displaying of tooltip help, so the "-h"
2420 command line option has been removed and the old-style event handling
2421 code has also been removed.
2422 * Added in a signal handler for the "delete" event for the main gcalctool
2423 window. The callback calls gtk_main_quit() to terminate the application.
2427 Overview of changes in gcalctool 4.2.26
2429 * HCI change. Attempt to correct disaplay the gcalctool icon.
2433 Overview of changes in gcalctool 4.2.25
2435 * HCI change. The Sto/Rcl/Exch menu items now show the current register
2440 Overview of changes in gcalctool 4.2.24
2442 * HCI change. All the radiobutton and checkbox items in the mode panel
2443 now have a mnemonic associated with them.
2447 Overview of changes in gcalctool 4.2.23
2449 * HCI change. Fixed up the buttons on the "Insert ASCII Value", "Enter
2450 Constant..." and "Enter Function..." popups. They now just use Cancel
2451 and OK buttons, and use standard stock Gtk icons.
2455 Overview of changes in gcalctool 4.2.22
2457 * HCI change. Added in an Edit->Paste menu item. If selected this will
2458 paste the current contents of the clipboard into the calculator display
2459 as if you'd typed it.
2460 * Added bullet proofing to protect the calculator against values that
2461 weren't found. If a value wasn't found, it's just ignored, and it goes
2462 on to process the next character in the string.
2463 * Improved the handling of the recognition of characters entered. It now
2464 takes into effect the mods value for each keysym.
2468 Overview of changes in gcalctool 4.2.21
2470 * HCI change. Added a 2 pixel border for the frames containing the Basic,
2471 Financial and Scientific buttons and the mode panel.
2475 Overview of changes in gcalctool 4.2.20
2477 * HCI change. Removed the "operand item" label widget.
2481 Overview of changes in gcalctool 4.2.19
2483 * The frames around the mode button tables and the mode panel are no longer
2488 Overview of changes in gcalctool 4.2.18
2490 * Fixed Bugzilla bug #101865. Remade various keyboard remappings:
2491 * Removed mention of the "-l" and "-r" command line options from the manual
2492 pages. Remove reference to the /schemes/apps/gcalctool/righthanded Gconf
2497 Overview of changes in gcalctool 4.2.17
2499 * Removed the "Keys" key, that allowed you to toggle the button labels to
2500 show their keyboard equivalents.
2504 Overview of changes in gcalctool 4.2.16
2506 * Put each of the the button tables and the mode panel inside a frame, rather
2507 then use horizontal separators, to try to make the GUI look nicer.
2511 Overview of changes in gcalctool 4.2.15
2513 * Entering "((2+3)*(2+3))" now gives the correct answer.
2514 * Added some bullet-proofing to parentheses handling when bogus characters
2519 Overview of changes in gcalctool 4.2.14
2521 * Hooked up the Help->Contents menu item. Note that help support still has
2522 to be included (i.e. a help subdirectory with associated files etc.).
2526 Overview of changes in gcalctool 4.2.13
2528 * The View->Memory Registers menu item now correctly toggles the showing of
2529 the memory register window.
2533 Overview of changes in gcalctool 4.2.12
2535 * Menubar menu items now use stock Gtk icons (where applicable).
2539 Overview of changes in gcalctool 4.2.11
2541 * Revised the gcalctoolrc (Gtk resources) file for the new display layout.
2545 Overview of changes in gcalctool 4.2.10
2547 * Going into Scientific mode and clicking on "(" twice no longer causes a
2548 segmentation violation.
2552 Overview of changes in gcalctool 4.2.9
2554 * Added some horizontal separators to help make the calculator more readable
2555 when in Financial and Scientific Mode.
2559 Overview of changes in gcalctool 4.2.8
2561 * Entering "((2+3)*9+(5-3))" no longer causes a segmentation violation.
2565 Overview of changes in gcalctool 4.2.7
2567 * Removed the attempt to display a calculator image on the About popup.
2568 * Typing the keyboard equivalent of the menu buttons now works.
2569 * Removed the VERSION string from the titlebar. This is now in the About popup
2573 Overview of changes in gcalctool 4.2.6
2575 * Added in an About popup that's accessible through the Help->About Gcalctool
2576 menubar Help menu item.
2580 Overview of changes in gcalctool 4.2.5
2582 * Fixed Bugzilla bug #102927.
2583 Replaced abbreviation "trig." with full word "trigonometric".
2587 Overview of changes in gcalctool 4.2.4
2589 * Fixed Bugzilla bug #102922.
2590 Adjusted two occurances of sentence fragments to make it easier for
2591 L10N folks to translate them.
2595 Overview of changes in gcalctool 4.2.3
2597 * Added Spanish (es) to ALL_LINGUAS at configure.in
2598 * gcalctool is now resizable again.
2602 Overview of changes in gcalctool 4.2.2
2604 * Made calculator window choose a reasonable size at startup, and resize
2605 when changing modes.
2609 Overview of changes in gcalctool 4.2.1
2611 * Removed the GNOME_UTIL_LIBS line in gcalctool/Makefile.am so that
2612 gcalctool will correctly build.
2616 Overview of changes in gcalctool 4.2.0
2618 * The gcalctool GUI layout has been redone to make the Basic mode more
2619 basic and to make the application more GNOMEish.
2620 * The Financial/Logical/Scientific mode buttons have been moved into
2621 the main calculator window above the Basic mode buttons. The Logical
2622 and Scientific modes have been combined.
2624 * The six item mode display has been removed and a mode panel added for
2625 the scientific mode.
2626 * Removed the property sheet. gcalctool no longer has a left or right
2628 * Blank buttons are now correctly hidden.
2629 * Added a "--enable-build-broken" flag to configure that has to be present
2630 in order to configure and build gcalctool while it's still in a semi-broken
2635 Overview of changes in gcalctool 4.1.27
2637 * Fixed Bugzilla bug #101782.
2638 Removed trailing "\n"'s where possible in the tooltip help messages.
2642 Overview of changes in gcalctool 4.1.26
2644 * Fixed Bugzilla bug #101861.
2645 The size of the memory register window is no longer hard-wired.
2649 Overview of changes in gcalctool 4.1.25
2651 * Fixed Bugzilla bug #101867.
2652 Changed multiply key from "X" to "*" (same as the existing gnome-calculator).
2656 Overview of changes in gcalctool 4.1.24
2658 * Fixed Bugzilla bug #101780.
2659 Removed leading and trailing spaces from the labels for the gcalctool buttons.
2663 Overview of changes in gcalctool 4.1.23
2665 * Fixed Bugzilla bug #101777.
2666 Removed trailing periods on the four window titles.
2670 Overview of changes in gcalctool 4.1.22
2672 * Various I18N changes.
2676 Overview of changes in gcalctool 4.1.21
2678 * Various I18N changes.
2682 Overview of changes in gcalctool 4.1.20
2684 * Fixed Sun Bugtraq bug #1102883 against DeskSet calctool:
2685 Adjusted so that all error messages just display "Error" which is
2690 Overview of changes in gcalctool 4.1.19
2692 * Fixed Sun Bugtraq bug #4006391 against CDE dtcalc:
2693 Bring up gcalctool, enter 10000 X 0.58 =, get answer is 5800.
2694 Then click on Int button, supposely should get 5800, but the answer was 5799.
2698 Overview of changes in gcalctool 4.1.18
2700 * Fixed Sun Bugtraq bug #1258472 against CDE dtcalc:
2701 Start up gcalctool and set to decimal and fixed. Set accuracy to 2 decimal
2702 places. Do a division like 0.19/2 It gives 0.0A.
2706 Overview of changes in gcalctool 4.1.17
2708 * Fixed Bugtraq bug #1190181 against OpenWindows DeskSet calctool:
2709 gcalctool core dumped if parent directory was not readable.
2713 Overview of changes in gcalctool 4.1.16
2715 * Updated TODO file with all relevant calculator Sun bugs and rfes.
2716 * Adjusted matherr() routine so that strict ANCI C compilers can compile it.
2717 * Mode windows now shows buttons correctly if you start up in Basic mode,
2718 then try to show one of the other modes.
2722 Overview of changes in gcalctool 4.1.15
2724 * "Keys" button now displays correctly if started with left-handed style.
2725 * Switching handed style now displays button labels correctly if currently
2726 showing the keyboard equivalent.
2730 Overview of changes in gcalctool 4.1.14
2732 * Buttons are colored correctly if started with left-handed style.
2736 Overview of changes in gcalctool 4.1.13
2738 * The unused buttons in the mode window are now hidden.
2742 Overview of changes in gcalctool 4.1.12
2744 * Added gconf support, removing the use of X11 resources.
2748 Overview of changes in gcalctool 4.1.11
2750 * Explicitly setting the size of the calculator buttons has been removed.
2751 * The width of the mode window is now set to the width of the main window.
2755 Overview of changes in gcalctool 4.1.10
2757 * Fixes for I18N support.
2761 Overview of changes in gcalctool 4.1.9
2763 * Now that gcalctool is using Gtk resources to determine the appearance of
2764 the calculator, there is no need to use the custom display_frame widget.
2765 * The calculator display area now has tooltip help.
2769 Overview of changes in gcalctool 4.1.8
2771 * Fixed up mistakes is the gcalctool tooltip help text.
2772 * Three keyboard accelerators weren't working when a "menu" button had been
2773 pressed and the calculator was in pending mode:
2774 Base button - "o" (octal).
2775 Mode button - "l" (logical).
2776 Trig button - "g" (gradient).
2777 * The + and . keys on the numeric keypad now work.
2781 Overview of changes in gcalctool 4.1.7
2783 * Added in help support. Hitting the Help key will toggle whether tooltip
2784 help messages are displayed for the various buttons and other widgets.
2786 By default tooltips are disabled. Start gcalctool with the "-h" command
2787 line option will enable them. There is also a "gcalctool.showhelp"
2788 resource that can enable/disable them.
2792 Overview of changes in gcalctool 4.1.6
2794 * The new Constant/Function popup now has the various items aligned.
2798 Overview of changes in gcalctool 4.1.5
2800 * The size of the buttons in the Mode window are incorrect if the unused ones
2801 are not shown. Solved this my simply making the unused ones insnsitive, and
2806 Overview of changes in gcalctool 4.1.4
2809 * Keyboard accelerators now work for the gcalctool "menu" buttons.
2813 Overview of changes in gcalctool 4.1.3
2815 * The constant and function definitions are now read and written to a file
2816 named ~/.gcalctoolcf.
2817 * gcalctool now also tries to read a ~/.gcalctoolrc file at startup time.
2818 This file (if it exists) can contain resources for changing the appearance
2819 of the application. A gcalctoolrc file is now also included with the
2820 gcalctool distribution, which gives the old OpenWindows DeskSet appearance
2822 * The ability to change various colors via X resources has also been removed.
2823 The manual pages have been updated to reflect this.
2827 Overview of changes in gcalctool 4.1.2
2829 * Starting gcalctool then switching hands to left-handed, then using the
2830 keyboard for input, wrongly associated the various keyboard accelerators
2831 for the swapped keys.
2835 Overview of changes in gcalctool 4.1.1
2837 * Now finds the X11 libraries in a platform independent way.
2838 * Fixed up the gcalctool usage message.
2839 * Fixed up the gcalctool manual pages.
2840 * gcalctool now looks for ~/.gcalctoolrc and ~/.gcalctooldefaults files.
2841 * X resources are now "gcalctool.<whatever" rather than "calctool.<whatever>".
2845 Overview of changes in gcalctool 4.1.0
2847 * Graphics driver is now based on Gtk2.
2851 Overview of changes in calctool 4.0.0
2853 * Code based on the calctool in the OpenWindows Deskset for Solaris 8.
2854 * Adjusted to use an autoconf/automake configuration and build environment.
2855 * Adjusted the code to a K&R style.
2856 * Incorporated in needed code from the libguide and libdeskset libraries.
2857 * Released under a GNU LIBRARY GENERAL PUBLIC LICENSE (LGPL) license.
2858 * Just an XView graphics driver currently provided.