4 * Copyright (c) 1987-2007 Sun Microsystems, Inc.
8 Overview of changes in gcalctool 5.21.1
10 * Work on bug #485919 - Use Glade for UI.
11 > Adds support for the mode panel.
12 > Puts menu accelerators back again and fixes the top button row in
13 basic mode being too tall.
14 > Now provides Glade support for the majority of the gcalctool GUI.
16 * Fix for bug #490701 - base radio buttons initially fail.
18 * Attempted fix for bug #485134 - OR calculation produces incorrect
19 result in arithmetic precedence mode. This isn't a complete solution
20 so the bug has been reopened.
22 * Fix for bug #488828 - Reciprocal remembers backspaced items.
24 * More work on bug ##488694 - [a11y] Several calculator buttons don't speak
25 correctly with Orca. Removed the accessible descriptions (not needed) and
26 adjusted the "shift left" and "shift right" names (they were reversed).
28 * Patch to stablize arithmetic precedence.
30 * Stop acting on toggle events from radio buttons when they go inactive
33 * Added Robert Ancell to the list of gcalctool MAINTAINERS.
35 * Fixed bug #488830 - Hex radio button shortcut conflicts with Help menu
38 * Fixed bug #488829 - Accuracy and Change Sign have wrong tooltip shortcut
41 * Fixed bug #488783 - memory registers not available if you start in
44 * Fixed bug bug #488694 - [a11y] Several calculator buttons don't speak
47 * Fix for bug #485398 - Put memory register window inside the main window.
48 Uses gtk_window_set_transient_for() to associate the memory register
49 window with the main gcalctool window.
51 * Fix for bug #383850 - [doc] New names for Precedence.
53 * Fix for bug #485137 - Undo/Redo don't work in arithmetic precedence mode
54 if user has "hand edited" the display.
56 * Added a call to "set_memory_toggle(v->rstate);" in make_frames() to
57 correctly set the state of the Edit-<Memory Registers check box if the
58 user wanted the memory registers initially displayed.
60 * Correctly handle memory register display and "Memory Registers" menu
61 item checkbox status when user goes from Sci/Fin/Adv mode to Basic.
62 (Needed because of the recent changes for bug #478961).
66 Overview of changes in gcalctool 5.21.0
68 * Fix for bug #326938 – Display cursor in input area; allow home and
69 end keys. This is in arithmetic precedence mode only.
71 * Fix for bug #484158 – Setting Accuracy is incorrect via the 0-9 places
74 * Fix for bug #439087 – Gcalctool can't handle small physic constants
75 like the Boltzmann constant. The number of significant places has
76 been increased to 99 and the number of displayable digits has been
77 increased to 200. The online help has been adjusted to reflect these
80 Note that if you have something in the gcalctool display that is
81 wider than the display area, a scrollbar is shown, but the first
82 digit isn't properly displayed. The workaround here, is to enlarge
83 the size of the calculator window until the scrollbar goes away.
84 I believe this is a Gtk+ problem and have filed bug #482688 against
87 * Fixed bug #367738 – [doc] Square root documentation needs to be updated.
88 The entry in the online help now includes examples for both arithmetic
89 precedence and non-arithmetic precedence mode.
91 * Fixed bug #428571 – [doc] Repetitive usage of "use".
93 * Use GNOME_MAINTAINER_MODE_DEFINES() to handle *_DISABLE_DEPRECATED
95 * Fixed bug #428573 – [doc] Spelling of logical gates.
96 The logical operations, And, Not, Or, Xor and Xnor now use uppercase
97 letters (AND, NOT, OR, XOR and XNOR) for both the buttons and in the
98 display area in arithmetic precedence mode. The gcalctool manual
99 pages and the online help have been updated accordingly.
101 The XOR operation in non-arithmetic mode was doing a multiplication
104 The result for the AND example in the online help was incorrect.
106 The syntax for using NOT in aritmetic mode is different then for
107 non-arithmetic mode. The online help example has been updated to
110 * Fixed bug #469245 – Hexadecimal input is not intuitive and
111 bug #455889 – Copy/paste of lower case hex letter does not work.
112 The hexadecimal digits have been changed back to their pre Sept
113 2003 (bug #118826) values of "a" - "f".
115 The following functions have also had their keyboard shortcuts
116 reverted back to their pre Sept 2003 upper-case values:
120 [D] - Double-declining depreciation
121 [E] - Enter an exponential number
122 [F] - User-defined functions
124 With copy/paste operations, where the user is pasting a string into
125 gcalctool, the copy buffer is now iterated over. If an "A", "B", "C",
126 "D" or "F" character is encountered, it will be converted to its
127 lowercase equivalent. If an "E" is found, and the next character is a
128 "-" or a "+", then it remains as an upper case "E" (it's assumed to be
129 a possible exponential number), otherwise its converted to a lower
132 Displaying of hex digits in the gcalctool display will still be
133 in uppercase. Displaying of the "e" in an exponential number will
134 still be in lower-case.
136 The way to enter exponential numbers in arithmetic precedence mode
137 has changed. The following four examples should show you the new
140 1 2 Exp + 8 = 1200000000
141 - 1 2 Exp + 8 = -1200000000
142 1 2 Exp - 8 = 0.00000012
143 - 1 2 Exp - 8 = -0.00000012
145 In both left-to-right precedence and arithmetic precedence modes, if
146 the user enters a numeric digit that is incorrect for the current
147 numeric base, this shouldn't be allowed and should not be entered
150 The gcalctool documentation (and tooltips) have been updated to
151 reflect these changes.
153 * Fixed bug #479102 – memory registers dialogue should use ngettext.
155 * Fixed bug #478961 – GtkAaction use.
157 * Fixed bug #478964 – don't use deprecated gtk_widget_ref func.
159 * Fixed bug #478979 – show menu help in statusbar.
161 * Fixed bug #479064 – should use ngettext on the Acc button.
163 * Fixed bug #479097 – use gtkmessagedialog.
165 * Fixed bug #479066 – weird way to use gnome menus-have-icons setting.
169 Overview of changes in gcalctool 5.20.0
171 * Released a gcalctool tarball for GNOME 2.20.0.
175 Overview of changes in gcalctool 5.19.92
177 * Released a gcalctool tarball for GNOME 2.19.92.
181 Overview of changes in gcalctool 5.19.91
183 * Released a gcalctool tarball for GNOME 2.19.91.
185 - Fixed bug #467442 – gcalctool does not appear in xfce4 menu.
189 Overview of changes in gcalctool 5.19.90
191 * Released a gcalctool tarball for GNOME 2.19.90.
193 - Adjusted the MAINTAINERS file to the new format.
197 Overview of changes in gcalctool 5.19.6
199 * Released a gcalctool tarball for GNOME 2.19.6.
201 - Remove help/de/Makefile due to gnome-doc-utils migration.
203 - Fixed bug #459702 – gcalc does not build against gtk+-2.11.6.
204 Occurances of gtk_tooltips_set_tip are now gtk_widget_set_tooltip_text.
206 - Fixed bug #439415. Always use left-to-right direction for button's boxes.
210 Overview of changes in gcalctool 5.19.5
212 * Released a gcalctool tarball for GNOME 2.19.5.
214 - Applied Sun patch to change the Comment line in gcalctool.desktop.in
216 - Fixed bug #451286 – 0 power of 0. This now returns 1 and not an error.
218 - Fixed bug #450790 – crash in Calculator when pasting in a very large
223 Overview of changes in gcalctool 5.19.4
225 * Released a gcalctool tarball for GNOME 2.19.4.
227 - Fixed bug #448263 – drop libgnome dependency
231 Overview of changes in gcalctool 5.19.3
233 * Released a gcalctool tarball for GNOME 2.19.3.
235 - Fixed bug #439985 – Negative value not saved in memory register across
236 invocations of gcalctool. This was also a problem was negative constants.
240 Overview of changes in gcalctool 5.19.2
242 * Released a gcalctool tarball for GNOME 2.19.2.
246 Overview of changes in gcalctool 5.19.1
248 * Released a gcalctool tarball for GNOME 2.19.1.
252 Overview of changes in gcalctool 5.9.14
254 * Released a gcalctool tarball for GNOME 2.18.0 (Final).
258 Overview of changes in gcalctool 5.9.13
260 * Released a gcalctool tarball for GNOME 2.18.0 (Release Candidate).
264 Overview of changes in gcalctool 5.9.12
266 * Released a gcalctool tarball for GNOME 2.18.0 (beta-2).
270 Overview of changes in gcalctool 5.9.11
272 * Released a gcalctool tarball for GNOME 2.18.0 (beta-1).
276 Overview of changes in gcalctool 5.9.10
278 * All copyright messages updated for 2007.
279 * Released a gcalctool tarball for GNOME 2.17.5.
283 Overview of changes in gcalctool 5.9.9
285 * Released a gcalctool tarball for GNOME 2.17.4.
289 Overview of changes in gcalctool 5.9.8
291 * Released a gcalctool tarball for GNOME 2.17.3.
295 Overview of changes in gcalctool 5.9.7
297 * Released a gcalctool tarball for GNOME 2.17.2.
301 Overview of changes in gcalctool 5.9.6
303 * Fixed bug #358782. Fixup sloppy string handling.
307 Overview of changes in gcalctool 5.9.5
309 * Fixed bug #364410. Incorrectly rounded pi constant.
313 Overview of changes in gcalctool 5.9.4
315 * Released a gcalctool tarball for GNOME 2.17.1.
319 Overview of changes in gcalctool 5.9.3
321 * Fixed bug 359291 - crash when localized decimal point is greater than
322 1 char. Removed the bogus assert.
326 Overview of changes in gcalctool 5.9.2
328 * Fixed bug #358337 - gcalctool no longer crashes in the Oriya locale due
329 to sloppy string handling.
330 * Fixed bug #354730 - crash in Calculator: running 3x10^38 using bi..
331 * Fixed bug #357208 - Bitcalculating extension needs to support negative
336 Overview of changes in gcalctool 5.9.1
338 * Fixed bug #157961 - Bitcalculating extension for gcalctool.
339 * Fixed bug #355648 - Error reporting should be consistent.
340 * Fixed bug #135140 - percent operator works not as expected.
344 Overview of changes in gcalctool 5.9.0
346 * Fixed bug #349981 - gcalctool should save screen position for next start.
350 Overview of changes in gcalctool 5.8.24
352 * Released a gcalctool tarball for GNOME 2.16.0 (Final).
356 Overview of changes in gcalctool 5.8.23
358 * Released a gcalctool tarball for GNOME 2.16.0 (RC1).
362 Overview of changes in gcalctool 5.8.22
364 * Removed several chunks of code that were surronded by #if 0/#endif.
368 Overview of changes in gcalctool 5.8.21
370 * Fixed bug #350341. gcalctool now builds again with gcc v2.95.
374 Overview of changes in gcalctool 5.8.20
376 * Released a gcalctool tarball for GNOME 2.16.0 (beta2).
380 Overview of changes in gcalctool 5.8.19
382 * More work on bug #347700. Added another "Note to translators"
383 comment for the Abs button labels.
385 * Fixed bug #348452. Removed line for help/sv/Makefile.in
387 * Released a gcalctool tarball for GNOME 2.16.0 (beta1).
391 Overview of changes in gcalctool 5.8.18
393 * Work on bug #347700. Added a "Note to translators" comment for the
394 Bksp and Clr button labels.
398 Overview of changes in gcalctool 5.8.17
400 * Released a gcalctool tarball for GNOME 2.15.4.
404 Overview of changes in gcalctool 5.8.16
406 * Released a gcalctool tarball for GNOME 2.15.3.
410 Overview of changes in gcalctool 5.8.15
412 * Fixed bug #343150. Gcalctool no longer crashes when switching to
417 Overview of changes in gcalctool 5.8.14
419 * Adjusted configure.in so that gcalctool now requires intltool v0.35.0.
423 Overview of changes in gcalctool 5.8.13
425 * Released a gcalctool tarball for GNOME 2.15.2.
429 Overview of changes in gcalctool 5.8.12
431 * Fixup compiler warnings from inclusion of last patch.
435 Overview of changes in gcalctool 5.8.11
437 * Fixed bug #163538 (http://bugzilla.gnome.org/show_bug.cgi?id=163538)
438 Backspace results in mal-formed expression.
440 * = button is now also a one step undo. (This feature was temporary
441 disabled by the previous redo/undo patch.)
443 * Removed gotos from do_expression function. (This change might add
444 unstability as this is a major change to the expression mode state
447 * Functions (such as sin, cos, tan..) can use previously calculated value.
451 Overview of changes in gcalctool 5.8.10
453 * First cut at an Undo/Redo implementation for use with the arithmetic
454 operator precedence mode.
458 Overview of changes in gcalctool 5.8.9
460 * Respun the gcalctool tarball for GNOME 2.15.1 as the po/*.po files
464 Overview of changes in gcalctool 5.8.8
466 * Removed .../po/Makefile.in.in. Shouldn't have been in CVS.
467 * Released a gcalctool tarball for GNOME 2.15.1.
471 Overview of changes in gcalctool 5.8.7
473 * Fixed bug #337897. Changes to use po/LINGUAS file.
477 Overview of changes in gcalctool 5.8.6
479 * Fixed bug #338220. The 'Show trailing zeroes' option in the View menu
480 should now be correctly set [in]sensitive depending upon which mode
485 Overview of changes in gcalctool 5.8.5
487 * Fixed bug #332023. The bitwise operators now work in arithmetic operator
488 precedence mode, when you use them with the result of a previous operation.
492 Overview of changes in gcalctool 5.8.4
494 * Fixed bug #327729. The fields in the memory register window were not
495 correctly aligned in some themes.
499 Overview of changes in gcalctool 5.8.3
501 * Fixed bug #330867. Added License info to the Gcalctool About dialog.
505 Overview of changes in gcalctool 5.8.2
507 * Fixed bug #335095. Gcalctool no longer displays the current mode in
508 the title bar when in Basic mode (due to lack of space).
512 Overview of changes in gcalctool 5.8.1
514 * Fixed bug #335236. Gcalctool schemas files should be installed if
515 built with "--without-gnome".
519 Overview of changes in gcalctool 5.8.0
521 * Adjustments to the AOP code so that e to the power of x gives the
522 correct answer at high precision.
526 Overview of changes in gcalctool 5.7.32
528 * Released a gcalctool tarball for GNOME 2.14.0 (Final).
532 Overview of changes in gcalctool 5.7.31
534 * Fix for bug #333078. cvs fails to build due to bg translation of help.
536 * Inclusion of a translation of gcalctool help for the bg locale.
540 Overview of changes in gcalctool 5.7.30
542 * Released a gcalctool tarball for GNOME 2.14.0 (RC).
546 Overview of changes in gcalctool 5.7.29
548 * Released a gcalctool tarball for GNOME 2.14.0 (beta2).
552 Overview of changes in gcalctool 5.7.28
554 * Released a gcalctool tarball for GNOME 2.14.0 (beta1).
558 Overview of changes in gcalctool 5.7.27
560 * Refixed bug #323150. The recent changes to the square root and
561 subtraction button labels broke the token parser for arithmetic
566 Overview of changes in gcalctool 5.7.26
568 * Fixed bug #327124. Changes to fix bug #326344 had the side-effect of
569 causing the CE button to no longer work correctly.
573 Overview of changes in gcalctool 5.7.25
575 * Fixed bug #327214. The results from performing trig functions were not
576 being passed on to future calculations correctly (in non-arithmetic
577 operator precedence mode).
581 Overview of changes in gcalctool 5.7.24
583 * Gcalctool now uses U+00F7 (DIVISION SIGN) instead of U+2215 (DIVISION SLASH)
584 for label on division button.
588 Overview of changes in gcalctool 5.7.23
590 * Released a gcalctool tarball for GNOME 2.13.5.
594 Overview of changes in gcalctool 5.7.22
596 * Fixed bug #323149. Gcalctool now uses the Unicode symbols for division,
597 multiplication, plus/minus, minus and square root.
601 Overview of changes in gcalctool 5.7.21
603 * Fixed bug #326344. The bit display of large numbers (in non-arithmetic
604 operator precedence mode with the scientific view) now hopefully works
609 Overview of changes in gcalctool 5.7.20
611 * Fixed bug #142824. Gcalctool no longer ignores locale specific numeric
612 point in arithmetic operator precedence mode.
614 * Adjusted all the copyright messages to include 2006.
618 Overview of changes in gcalctool 5.7.19
620 * Fixed bug #317378 (http://bugzilla.gnome.org/show_bug.cgi?id=317378)
621 Gcalctool no longer crashes when you double click the 0 in the display area.
625 Overview of changes in gcalctool 5.7.18
627 * Final fix for bug #153854. Now handles the case where the first thing
628 the user does is change mode (Basic, Financial, Advanced, Scientific)
631 * Released a gcalctool tarball for GNOME 2.13.4.
635 Overview of changes in gcalctool 5.7.17
637 * Fixed bug #323150. Sqrt (and other similar operations) no longer fail
638 in non-English locales
642 Overview of changes in gcalctool 5.7.16
644 * Fixed bug #324001. Primary Selection (middle mouse button) is now working.
648 Overview of changes in gcalctool 5.7.15
650 * Released a gcalctool tarball for GNOME 2.13.3.
654 Overview of changes in gcalctool 5.7.14
656 * More work on bug #153854. Similar change to that made on 15th November
657 2005, this time for arithmetic operator precedence mode.
661 Overview of changes in gcalctool 5.7.13
663 * Slight fixup for bug #157961. The toggling of the first bit in the
664 bit panel wasn't working correctly.
668 Overview of changes in gcalctool 5.7.12
670 * More work on bug #153854
671 If the user has completed a calculation and we are going to a
672 new mode that is "compatible" with this one, then just change
673 modes. Otherwise display a dialog warning the user that the
674 current calculation will be cleared.
676 Incompatible modes are:
679 Scientific -> Advanced
680 Scientific -> Financial
682 (unless we are in Scientific mode with Decimal numeric base and Fixed).
684 These changes work nicely in non-arithmetic operator precedence mode.
688 Overview of changes in gcalctool 5.7.11
690 * Released a gcalctool tarball for GNOME 2.13.2.
694 Overview of changes in gcalctool 5.7.10
696 * Fixed bug #316755. Gcalctool no longer has "Gdk-CRITICAL **:
697 gdk_window_invalidate_rect: assertion `window != NULL' failed"
702 Overview of changes in gcalctool 5.7.9
704 * Fixed bug #319934. The percent operator was broken in non-arithmetic
705 operator precedence mode.
709 Overview of changes in gcalctool 5.7.8
711 * Fixed bug #317378 (http://bugzilla.gnome.org/show_bug.cgi?id=317378)
712 Exponential notation now works correctly in arithmetic operator
717 Overview of changes in gcalctool 5.7.7
719 * Slight adjustment to the bit panel. It's now centralized.
723 Overview of changes in gcalctool 5.7.6
725 * Adjusted the mpcmim() routine in mp.c. The fix for Sun bug #4006391
726 needed to also preserve v->toclear and v->pointed.
728 * Work on enhancement request #157961. Started to implement the bit
729 panel for non-arithmetic precedence mode. It's automatically displayed
730 when in Scientific mode.
734 Overview of changes in gcalctool 5.7.5
736 * Implemented enhancement request #148104 for arithmetic precedence mode.
737 The modulo operation. See entry below for more details.
741 Overview of changes in gcalctool 5.7.4
743 * Fixed bug #316382. The "useless" cursor is no longer displayed in
744 the calculator display area.
748 Overview of changes in gcalctool 5.7.3
750 * Implemented enhancement request #148104 for non-arithmetic precedence
751 mode. Added in a modulo operation. This is available in Scientic Mode.
752 A Mod B return the remainder when you divide A by B. A and B must be
753 integers. Keyboard shortcut for this operation is "M".
757 Overview of changes in gcalctool 5.7.2
759 * Fixed bug #162453. The memory register dialog now uses GtkEntry widgets
760 to display the register values. Gnopernicus can now correctly speak the
761 contents of each memory register. There is also a close button to easily
766 Overview of changes in gcalctool 5.7.1
768 * Fixed bug #314540. The memory register window is now a dialog rather
769 than a top-level window.
773 Overview of changes in gcalctool 5.7.0
775 * Fix to prevent invalid numeric entry in arithmetic operator precedence
776 mode, depending upon the current base.
780 Overview of changes in gcalctool 5.6.31
782 * A number of the bison- and flex-related make rules in
783 .../gcalctool/Makefile.am were broken when builddir != srcdir.
787 Overview of changes in gcalctool 5.6.30
789 * Fixed bug #314540. The libparser.a library needs ranlib run on it
794 Overview of changes in gcalctool 5.6.29
796 * Fixed bug #314375. Replaced usage of malloc.h with stdlib.h in
801 Overview of changes in gcalctool 5.6.28
803 * Generated release for GNOME 2.12 (RC)
805 * Changed type of argument in paren_disp from char to int for 64bit.
809 Overview of changes in gcalctool 5.6.27
811 * Fixed bug #313255. The definitions for BUT_<n>_BAS in gtk.c were incorrect.
813 Overview of changes in gcalctool 5.6.26
815 * Generated release for GNOME 2.11.91 (beta2).
819 Overview of changes in gcalctool 5.6.25
821 * Fixed bug #311306. If the user was in View->Scientific with base Bin,
822 Oct or Hex and then went to View->Basic, then returned to View->Scientific,
823 some of the numeric keys were incorrectly greyed out.
827 Overview of changes in gcalctool 5.6.24
829 * Fixed bug #310849. Gcalctool no longer crashes when pressing the "B"
830 button (or typing Shift-B).
834 Overview of changes in gcalctool 5.6.23
836 * Fixed bug #310791. Memory register window view logic was screwed.
840 Overview of changes in gcalctool 5.6.22
842 * Fixed bug #310441. Adjusted code to compile with gcc 2.95.2.
846 Overview of changes in gcalctool 5.6.21
848 * Fixed bug #153854. When the user changes modes, a warning dialog is
849 displayed to let them know that their current display will be cleared
850 and the base reset to decimal. The user has the option of checking a
851 toggle box on the dialog, that will prevent this warning from being
856 Overview of changes in gcalctool 5.6.20
858 * Fixed bug #309294. Adjustments to allow gcalctool to successfully build
859 on Solaris with pkgconfig >= 0.17.1.
863 Overview of changes in gcalctool 5.6.19
865 * Fixed bug #309182. In non-arithmetic precdence mode, gcalctool can now
866 correctly change the sign of the exponent on scientific numbers again.
869 Overview of changes in gcalctool 5.6.18
871 * Fixed bug #308408. gcalctool can now correctly convert the hexadecimal
872 numbers "A-F" to other bases in "use arithmetic operator precedence mode".
876 Overview of changes in gcalctool 5.6.17
878 * Fixed bug #305619. Calculations with stored register values in arithmetic
879 operator precedence mode, now work correctly.
883 Overview of changes in gcalctool 5.6.16
885 * Fixed bug #305034. In "Use Arithmetic Precedence" mode, when switching
886 the format (e.g. from ENG to FIX), the displayed value switches to zero
887 (in the corresponding format, so e.g. 0.0 or 0e+0, ...).
891 Overview of changes in gcalctool 5.6.15
893 * Fixed bug #305467. gcalctool no longer crashes under the following
895 - type "f" to bring up the user function menu.
896 - dismiss the menu by clicking elsewhere with the mouse.
897 - type another character which isn't in the range "0" to "9".
901 Overview of changes in gcalctool 5.6.14
903 * Did a gcalctool tarball release.
907 Overview of changes in gcalctool 5.6.13
909 * Fixed bug #304056. Adjusted the keyboard shortcuts for the Xor and x^y
910 operations. New values are:
916 Overview of changes in gcalctool 5.6.12
918 * Fixed bug #302555. Various gcalctool variables have now been const'ified.
922 Overview of changes in gcalctool 5.6.11
924 * Fixed bug #300957. Replaced the underscore character in
925 "translator_credits" with a hyphen, to prevent some
926 translation tools from being confused.
930 Overview of changes in gcalctool 5.6.10
932 * More work on bug #172704.
933 - Adjusted the code to not try to display a menu when the user
934 entered a left parentheses (another do_pending() type of operation).
935 - Toggling the "Show Trailing Zeroes" operation via keyboard
936 shortcuts, needed to clear the v-.pending flag.
940 Overview of changes in gcalctool 5.6.9
942 * Fixed up some problems reported by lint.
946 Overview of changes in gcalctool 5.6.8
948 * Fixed bugs #172704 and #172869. When the user now uses the keyboard shortcut
949 for any of the gcalctool buttons that have a menu associated with them, that
950 menu is now displayed. The user can use the arrow keys to select a menu item
951 or the menu items shortcut.
955 Overview of changes in gcalctool 5.6.7
957 * Fixed bug #171393. Allow stock labels to show through.
961 Overview of changes in gcalctool 5.6.6
963 * Refixed bug #158280. The Help->Contents menu item no longer appears if
964 gcalctool is built Gtk-only.
968 Overview of changes in gcalctool 5.6.5
970 * Fixed bug #172798. gtk_set_locale was already being run by gtk_init()
971 and the gtk about popup didn't have the gcalctool icon.
975 Overview of changes in gcalctool 5.6.4
977 * Fixed Sun internal CR #6214176. If gcalctool is being driven by gok,
978 the on-screen keyboard assistive technology, it's possible that the
979 event returned by gtk_get_current_event() is NULL. If this is the
980 case, we need to fudge the popping up on the menu associated with
985 Overview of changes in gcalctool 5.6.3
987 * Fixed bug #158280. You can now build gcalctool without the GNOME
988 libraries by specifying "--disable-gnome" on the configure command
993 Overview of changes in gcalctool 5.6.2
995 * Fixed bug #167479. gcalctool with set the View->Memory Registers menu
996 item inactive if the calculator is in Basic mode.
1000 Overview of changes in gcalctool 5.6.1
1002 * Fixed bug #168694. gcalctool now saves/restores the ten memory
1003 register values as gconf resources.
1005 * Removed the redundant process_str() routine in graphics.c
1009 Overview of changes in gcalctool 5.6.0
1011 * Fixed bug #169196. gcalctool now uses use g_get_home_dir().
1013 * Added in a better implementation of the trig_filter() routine in
1018 Overview of changes in gcalctool 5.5.41
1020 * Version for GNOME 2.10.0 (final) call for tarballs.
1024 Overview of changes in gcalctool 5.5.40
1026 * Version for GNOME 2.10.0 (rc1) call for tarballs.
1030 Overview of changes in gcalctool 5.5.39
1032 * Partial fix for bug 168385. "F+F=" wasn't working in arithmetic operator
1037 Overview of changes in gcalctool 5.5.38
1039 * Changes to make the trigonometric code work with hyp and inv properly.
1043 Overview of changes in gcalctool 5.5.37
1045 * Left and Right shift operations weren't working correctly. Menu
1046 name comparison in mb_proc() in gtk.c was incorrect.
1050 Overview of changes in gcalctool 5.5.36
1052 * The fix for bug #162998 was incorrect when in Arithmetic Precedence mode.
1053 * Exch functionality was incorrect in Arithmetic Precedence mode.
1057 Overview of changes in gcalctool 5.5.35
1059 * Fixed bug 167124. One of the entries in the words[] array in
1060 syntax_translation.c was accidentally commented out.
1064 Overview of changes in gcalctool 5.5.34
1066 * Fixed bug 166634. Call to create the About box was missing a
1071 Overview of changes in gcalctool 5.5.33
1073 * Adjusted all copyright messages to be 2005.
1074 * Version for GNOME 2.10.0 (beta2) call for tarballs.
1078 Overview of changes in gcalctool 5.5.32
1080 * Fixed bug #165522. Made the status bar non-resizable.
1084 Overview of changes in gcalctool 5.5.31
1086 * Various code cleanups. It moves some declarations of static functions
1087 to the corresponding .c files. It also cuts down the number of
1088 included files, moving some includes to where they are needed from
1093 Overview of changes in gcalctool 5.5.30
1095 * Adjusted the About dialog to use the latest GtkAbout widget.
1099 Overview of changes in gcalctool 5.5.29
1101 * Version for GNOME 2.10.0 (beta1) call for tarballs.
1105 Overview of changes in gcalctool 5.5.28
1107 * Fixed bug #162998. The "menu" buttons in gcalctool now responds
1108 to the "clicked" event rather than the "button-press-event" to
1109 allow gok, the on-screen keyboard to function properly.
1111 * Fixed bug #159957. Input number in FIX mode now make mimimal changes
1112 to (i.e append a single character) the display rather than completely
1113 delete and insert it. The is helpful to assistive technologies like
1118 Overview of changes in gcalctool 5.5.27
1120 * Fixed bug #164184. Adjusted location of comments in syntax_translation.c
1121 so that the L10N message translation software isn't confused.
1125 Overview of changes in gcalctool 5.5.26
1127 * Fixed bug #163468. Pressing "(<Del>)" would cause gcalctool to crash.
1131 Overview of changes in gcalctool 5.5.25
1133 * Version for GNOME 2.9.4 call for tarballs.
1137 Overview of changes in gcalctool 5.5.24
1139 * Couldn't use the "#" key to select constants as this symbol was
1140 a lower-case symbol on his keyboard.
1142 * Powers that were a multiple of 30 (10 as well as 3) would not
1143 display correctly, having a 4 digit significand. Further testing
1144 showed that without the fix the following powers had a 4 digit
1145 significand: 27,30, 57,60, 90, 96 (and every 3 from here on).
1149 Overview of changes in gcalctool 5.5.23
1151 * Fixed bug #161976. configure.in now checks to make sure that atk >= 1.5
1155 Overview of changes in gcalctool 5.5.22
1157 * Fixed bug #155101. Made the gcalctool window resizable.
1161 Overview of changes in gcalctool 5.5.21
1163 * Version for GNOME 2.9.3 call for tarballs.
1167 Overview of changes in gcalctool 5.5.20
1169 * Fixed bug #160929. Removed the "Mode" word from each of the different
1170 mode menu items in the gcalctool View menu.
1174 Overview of changes in gcalctool 5.5.19
1176 * Fixed bug #157701. gcalctool can now use real multiplication and division
1177 symbols instead of "*" and "/".
1181 Overview of changes in gcalctool 5.5.18
1183 * Fixed bug #160088. Adjusted the titlebar text so that it doesn't include
1184 the word "Mode" which was getting chopped when the calculator was in
1189 Overview of changes in gcalctool 5.5.17
1191 * Fixed bug #157962. Added in a set of three colors for gcalctool that
1192 will work with the default theme. To use them, the "gcalctoolrc" file
1193 supplied with the source distribution needs to be moved to ~/.gcalctoolrc
1197 Overview of changes in gcalctool 5.5.16
1199 * Generated gcalctool tarball for the GNOME 2.9.2 release.
1203 Overview of changes in gcalctool 5.5.15
1205 * Adjusted the scroll_right() routine to only scroll right if the
1206 horizontal scroll bar is visible.
1210 Overview of changes in gcalctool 5.5.14
1212 * Fixed bug #158357. Removed the -DGNOME_DISABLE_DEPRECATED and the
1213 -DGTK_DISABLE_DEPRECATED flags from the INCLUDES definition in
1214 .../gcalctool/Makefile.am for now, to allow it to successfully build
1215 against the latest GNOME/Gtk+.
1217 * Slight adjustment to correct check the Advanced mode menu item when
1218 the user had previously terminated gcalctool in that mode.
1222 Overview of changes in gcalctool 5.5.13
1224 * Changed the names of the gconf mode type key so that there is backward
1227 * Reset the initial default mode to BASIC.
1231 Overview of changes in gcalctool 5.5.12
1233 * Fixed bug #157757. The horizontal scrollbar for the display area will
1234 now only be visible when needed. It will also display the rightmost part
1235 of the display as you are entering new input.
1239 Overview of changes in gcalctool 5.5.11
1241 * Added in a very basic mode for gcalctool. Rather than calling this a
1242 "Light" mode, the existing "Basic" mode is now renamed to "Advanced"
1243 and the new basic mode is called "Basic".
1247 Overview of changes in gcalctool 5.5.10
1249 * Fix for bug #157021. X^Y now works for -X with integer Y. -X with
1250 non-integer Y will now display a descriptibe error in the status bar.
1254 Overview of changes in gcalctool 5.5.9
1256 * Generated gcalctool tarball for first GNOME 2.9 release.
1260 Overview of changes in gcalctool 5.5.8
1262 * Slight adjustment to bug #152301. The tooltip message had been tweaked to
1263 "Show the About Gcalctool dialog".
1267 Overview of changes in gcalctool 5.5.7
1269 * Fixed bug #152301. Adjusted the tooltip message for Help->About... from
1270 "Show about help" to "Show the about dialog", to make it more understandable.
1274 Overview of changes in gcalctool 5.5.6
1276 * Fixed bug #153726. Gcalctool will now build correctly when using the
1277 -fno-common option for gcc (3.3.4).
1281 Overview of changes in gcalctool 5.5.5
1283 * Numerical answer localization and thousand separator support for
1284 arithmetic precedence mode.
1286 * If the accuracy was changed via one of the ten preset menu items in the
1287 Acc menu, the tooltip wasn't getting correct updated with the new accuracy.
1291 Overview of changes in gcalctool 5.5.4
1293 * Further changes to the "Set Precision" popup (rfe #147803):
1294 - "Significant places" not "Significant Places".
1295 - Change "Set Precision..." to be "Other (12) ..." (where "(12)" is the
1296 current precision, and be in the same radio box group as the other menu
1297 items. Check the appropriate menu entry.
1298 - Adjust the Acc button tooltip to show the current accuracy too.
1299 - When the user attempts to enter an invalid entry in the Set Precision
1300 popup, an error message is shown in the main gcalctool status bar.
1301 - the other Acc radio button items (0-9) need to have mnemonics (_0, _1 ...).
1303 * Fixed bug #152790. Most of the changes needed were already in CVS; there
1304 was one compiler warning that still needed to be removed.
1306 * Storing the display value to a memory register was not updating the memory
1307 register window, if it was visible.
1311 Overview of changes in gcalctool 5.5.3
1313 * Added in functionality to set the number of significant places > 9.
1314 There is a new menu item under the Acc menu called "Set Precision..."
1315 that brings up a small popup allowing you to set precision between 0
1316 and MAXACC significant places (where MAXACC is currently 30).
1320 Overview of changes in gcalctool 5.5.2
1322 * Fixed up numerous warnings generated by running lint on the gcalctool code.
1323 Removed unused variables and functions. Declared routines statically where
1328 Overview of changes in gcalctool 5.5.1
1330 * Fixed bug 148581. Changes to get latest gcalctool compiling on a BSD system.
1334 Overview of changes in gcalctool 5.5.0
1336 * Major new release of gcalctool. Incorporates an arithmetic operator
1337 precedence mode (currently the default while it's been debugged). To get
1338 the old style, uncheck View->Use Arithmetic Precedence from the menu bar.
1339 * The "(" and ")" buttons have moved from the scientific mode into the
1340 Basic mode so that they are now available to users who need them but not
1341 everything that the Scientific mode provides.
1342 * There is a footer message area that provides feedback.
1343 * The display area now has an horizontal scrollbar.
1344 * Typing in the keyboard shortcuts for the various gcalctool buttons
1345 autocompletes their entry into the display area.
1346 * Tooltips show button's shortcut.
1350 Overview of changes in gcalctool 4.4.13
1352 * Remainder of the fix for bug #143924. Control-T shouldn't work in Basic
1357 Overview of changes in gcalctool 4.4.12
1359 * Partial fix for bug #143924. After an error condition, the "Show
1360 Trailing Zeroes" menu item is only activated if the user is in
1365 Overview of changes in gcalctool 4.4.11
1367 * Fixed bug 138106. In Basic or Financial mode, "Error" was been
1368 incorrectly display if you user has "Show Thousands Separator" set.
1372 Overview of changes in gcalctool 4.4.10
1374 * Fixed bug 144031. gcalctool checked for the presence of the X11
1375 libraries but doesn't need to.
1379 Overview of changes in gcalctool 4.4.9
1381 * Selecting Help->About from the menubar now works again.
1385 Overview of changes in gcalctool 4.4.8
1387 * Adjusted the creation of the menubar and the Accuracy and Left/Right
1388 shift menus from GtkItemFactory to GtkUIManager.
1392 Overview of changes in gcalctool 4.4.7
1394 * Fixed bug 142824. gcalctool now correctly recognizes the localized
1395 decimal point character.
1399 Overview of changes in gcalctool 4.4.6
1401 * Fixed bug 129397. Use GtkIconTheme to load gcalctool icon instead of
1406 Overview of changes in gcalctool 4.4.5
1408 * Fixed bug 142888. Gcalctool is now connected to the "die" signal so
1409 that it can be successfully terminated when removed from
1410 gnome-session-properties.
1414 Overview of changes in gcalctool 4.4.4
1416 * The "Bsp" button label has been changed to "Bksp" to make it more
1421 Overview of changes in gcalctool 4.4.3
1423 * Fixed bug 138106. If the "Error" message is being displayed, it is now
1424 no longer incorrectly displayed as "Er,ror" if the "Show Thousands
1429 Overview of changes in gcalctool 4.4.2
1431 * Fixed bug 135068. Adjusted several default constant descriptions to be
1432 more understandable.
1436 Overview of changes in gcalctool 4.4.1
1438 * Fixed bug 135065. Tooltips for OR, AND, NOT, XOR and XNOR have been
1439 changed from "Logical <whatever>" to "Bitwise <whatever>".
1443 Overview of changes in gcalctool 4.4.0
1445 * Fixed bug 136872. gcalctool can now be built with "CFLAGS=-fdata-sections".
1449 Overview of changes in gcalctool 4.3.51
1451 * Version for GNOME 2.6 (FINAL) call for tarballs. Includes:
1452 - new locales for pa, en_GB, bg and ga.
1453 - localized online user documentation from the Sun translation team.
1454 for de, es, fr, it, ja, ko, sv, zh_CN, zh_HK and zh_TW.
1458 Overview of changes in gcalctool 4.3.50
1460 * One more slight adjustment to the fix for bug 135064.
1461 Entering numbers that start with the numeric point character ('.")
1462 are now visibly displayed.
1466 Overview of changes in gcalctool 4.3.49
1468 * Adjustment to the fix for bug 135064. Fix to remove a potential spurious
1469 initial thousands separator character after a change sign operation.
1473 Overview of changes in gcalctool 4.3.48
1475 * Fixed bug 135064. Changing the sign of a large number (when "Show
1476 Thousands Separator" is on and this is not the C locale), no longer
1477 corrupts the display.
1481 Overview of changes in gcalctool 4.3.47
1483 * Fixed bug 135328. Added Shift-slash as a recognized alternate for the
1484 divide operation (needed by the be-latin1 keyboard layout).
1488 Overview of changes in gcalctool 4.3.46
1490 * Fixed bug 134540. gcalctool now correctly handles the digits 0123456789
1491 which are shifted about the accented characters on a French keyboard.
1495 Overview of changes in gcalctool 4.3.45
1497 * Fixed bug 134484. Doing "3 x! x! x!" no longer causes gcalctool to lock up.
1501 Overview of changes in gcalctool 4.3.44
1504 - "Gradients" was still appearing when in Scientific mode (instead of
1506 - In the x^2 button, the 2 should not be italicized.
1507 - In the x^2 and x^y buttons, the x should be italicized.
1508 - The View Thousands Separator menu item should not remain active during
1513 Overview of changes in gcalctool 4.3.43
1515 * Fixed bug 133590. The About box now lists the documenters of gcalctool.
1519 Overview of changes in gcalctool 4.3.42
1521 * Fixed bug 132582. Adjusted the gcalctool titlebar to use a hyphen
1522 (rather than square brackets) to show what mode the user is currently
1527 Overview of changes in gcalctool 4.3.41
1529 * Fixed bug 132570. Adjusted UI to use spacing to delineate groups rather
1530 than frames (per the HIG).
1534 Overview of changes in gcalctool 4.3.40
1536 * Fixed bug 131571. User defined constants are now read/written out (as
1537 gconf resources) with no thousands separator and with a radix of ".".
1541 Overview of changes in gcalctool 4.3.39
1543 * Fixed bug 131594. The "Insert ASCII View..." menu item and the
1544 "Insert" button no longer use the GTK_STOCK_CONVERT stock icon
1549 Overview of changes in gcalctool 4.3.38
1551 * Fixed bug 131059. Fix to allow the thousands separator to be used
1552 correctly with the creation of the initial constant values in the
1557 Overview of changes in gcalctool 4.3.37
1559 * Fixed bug 130078. Changed the y^x button label to x^y (really x
1560 superscript y). Adjusted the tooltip message to "Raise displayed
1561 value to the power of y".
1565 Overview of changes in gcalctool 4.3.36
1567 * Fixed bug 130282 again. Needed to remove the "|| tsep[0] == '\0'" check
1568 from the get_tsep() routine in order to get the thousands separator to
1569 correctly work in all locales. Note that there is no thousands separator
1570 now for the C locale.
1574 Overview of changes in gcalctool 4.3.35
1576 * Fixed part of bug 126125. If the user entered: "1+(2()<backspace>)",
1577 this resulted in an answer of 0.
1581 Overview of changes in gcalctool 4.3.34
1583 * Fixed bug 130187. When gcalctool changes modes now, it's internal state
1584 and the display are cleared.
1588 Overview of changes in gcalctool 4.3.33
1590 * Fixed bug 130282. Fixes for more problems with the thousands separator
1591 in certain locales, plus correct handling of the radix character with
1592 the initial constant values.
1596 Overview of changes in gcalctool 4.3.32
1598 * Fixed bug 128603 again. The solution this time was to duplicate the
1599 initial string constant values to be confident that they are not in
1604 Overview of changes in gcalctool 4.3.31
1606 * Fixed bug 129539. The thousands separator is a null terminated string,
1607 not a single character. Same for the radix.
1611 Overview of changes in gcalctool 4.3.30
1613 * Fixed bug 129496. "Gradients" should be "Gradians".
1617 Overview of changes in gcalctool 4.3.29
1619 * Fixed bug 128603. The changes for enhancement request #126626 which added
1620 thousands separator support caused a crash at startup time on a Debian
1621 system. The initial constant strings are being put in read-only memory
1622 either by gcc (or because of the way that x86 arch is designed). This was
1623 not a problem when tested with the Sun compilers on a Solaris SPARC machine.
1624 The remove_tsep() routine is display.c has been rewritten to correctly
1629 Overview of changes in gcalctool 4.3.28
1631 * Further work on enhancement request 125873. As the user is typing in
1632 input, the display will now show the thousands separator (if checked).
1636 Overview of changes in gcalctool 4.3.27
1638 * On a Solaris keyboard, Shift-"^" is GDK_asciicircum/GDK_SHIFT_MASK.
1639 This keyval/state pair needed to be added to the Xor recognized mappings.
1643 Overview of changes in gcalctool 4.3.26
1645 * Re-fixed bug 127672. The fix for Shift-"=" should have been for GDK_equal
1646 not GDK_Return. Needed to add in support for Shift-"/" too.
1650 Overview of changes in gcalctool 4.3.25
1652 * Implemented enhancement request 125873. gcalctool can now optionally
1653 show the thousands seperator character for fixed point numbers displayed
1654 in the decimal base. Same for numbers stored in the memory registers.
1655 There is a new "Show Thousands Separator" menu entry in the View menu
1660 Overview of changes in gcalctool 4.3.24
1662 * Fixed bug 126626. gcalctool no longer causes a Gtk-CRITICAL error when
1663 the user enters "9*(1<Xor>". The problem was caused because a non-UTF
1664 character was being inserted into the text string to be displayed for
1669 Overview of changes in gcalctool 4.3.23
1671 * Fixed bug 125782. If the user is entering a left parenthesis and it is
1672 the first one being displayed and there is no current arithmetic operand,
1673 then the current display is initially cleared to avoid the confusion of
1674 showing something like "0(".
1678 Overview of changes in gcalctool 4.3.22
1680 * Fixed bug 127862. The fix for bug #125625 introduced a potential
1681 out-of-order case for users who are rapid keyboard typers. This
1682 bug fix rectifies this with the unfortunate side-effect of no longer
1683 visual toggling the equivalent button to the keyboard character
1684 that the user entered. This fix is still compatible with the way
1685 the accessibility infrastructure works though.
1689 Overview of changes in gcalctool 4.3.21
1691 * Fixed bug 65806. For the "1/x", "x^2", "x!", "e^x", "10^x" and
1692 "y^x" labels, all occurances of "x" and "y" are now italicized.
1693 The "e" in "e^x" is no longer italicized.
1697 Overview of changes in gcalctool 4.3.20
1699 * Fixed bug 127316. The "fix" introduced in gcalctool v4.1.18 to fix Sun
1700 Bugtraq bug #1258472 against CDE dtcalc (which was also a problem with
1701 gcalctool) was incorrect.
1705 Overview of changes in gcalctool 4.3.19
1707 * Fixed bug 127672. The "=" key on a Swedish keyboard is on the upper
1708 level of a key (i.e. the Shift key needs to be down). Added another
1709 mask/keysym pair to the "=" entry to handle this.
1713 Overview of changes in gcalctool 4.3.18
1715 * Fixed bug 125625. gcalctool now handles "clicked" events rather than
1720 Overview of changes in gcalctool 4.3.17
1722 * Fixed bug 124928. Plugged several memory leaks.
1726 Overview of changes in gcalctool 4.3.16
1728 * Fixed bug 124377. Fixed rounding errors when the radix character for a
1730 * Online help updated for various recent (small) changes.
1734 Overview of changes in gcalctool 4.3.15
1736 * Fixed bug 124172. The "+" character on a German keyboard is on the lower
1737 level of a key (i.e. the Shift key doesn't need to be down). Added another
1738 mask/keysym pair to the "+" entry to handle this.
1742 Overview of changes in gcalctool 4.3.14
1744 * Fixed bug 120737. Changed the accessible text for the OR button from
1745 "Logical OR" to "logical OR" so that it's not changed by FreeTTS's
1746 token to words module to "logical Oregon".
1750 Overview of changes in gcalctool 4.3.13
1752 * Fixed bug #123948. Removed the GTK_DISABLE_DEPRECATED flag from
1753 .../gcalctool/gcalctool/Makefile.am, to allow the depreciated
1754 GtkItemFactory, to successfully build.
1758 Overview of changes in gcalctool 4.3.12
1760 * Fixed bug 123724. Hitting Esc now does the same as hitting
1761 Control-Backspace; i.e. the CE (clear entry) functionality.
1762 * Updated the gcalctool man pages to reflect this change, and the changes
1767 Overview of changes in gcalctool 4.3.11
1769 * Refixed bug 122373. gcalctool now uses nl_langinfo() to get the numeric
1770 point for the users locale, rather than via a localised string.
1774 Overview of changes in gcalctool 4.3.10
1776 * Fixed enhancement #65806. Changed that label for e^x (e superscript x) to
1777 use an italised "e".
1781 Overview of changes in gcalctool 4.3.9
1783 * Fixed bug 118826. The keyboard shortcuts for the six hex. digits are
1784 now "A" to "F". The functions that previously used those letters have
1785 been reassigned to their lowercase equivalents.
1789 Overview of changes in gcalctool 4.3.8
1791 * Fixed bug 122408. The tooltips for the numeric buttons (0-9) have been
1792 removed as they are redundant.
1796 Overview of changes in gcalctool 4.3.7
1798 * Fixed bug 120749. When gcalctool is displaying a menu, typing Alt+Tab
1799 can no longer switch windows.
1803 Overview of changes in gcalctool 4.3.6
1805 * Fixed bug 120745 (http://bugzilla.gnome.org/show_bug.cgi?id=120745)
1806 Accessible names have now been added to each of the widgets in the
1807 mode panel when in Scientific mode.
1811 Overview of changes in gcalctool 4.3.5
1813 * Fixed bug 122373. The decimal separator is now a translatable string so
1814 that other locales that don't use a period can adjust accordingly.
1818 Overview of changes in gcalctool 4.3.4
1820 * Fixed bug 120605. Gcalctool debug messages are no longer translatable
1825 Overview of changes in gcalctool 4.3.3
1827 * Build for GNOME 2.4 (Final). Tag in CVS is GCALCTOOL_4_3_3
1831 Overview of changes in gcalctool 4.3.2
1833 * Fixed bug 119888. gcalctool keyboard handling has been improved.
1837 Overview of changes in gcalctool 4.3.1
1839 * Fixed bug 119832. The space bar can now correctly activate the button
1844 Overview of changes in gcalctool 4.3.0
1846 * Build for GNOME 2.4 (Beta1). Tag in CVS is GCALCTOOL_4_3_0
1850 Overview of changes in gcalctool 4.2.104
1852 * Fixed bug 118246. The display field can now take focus. The initial
1853 widget with focus is the Clr button.
1857 Overview of changes in gcalctool 4.2.103
1859 * (Bug #118247) Three more small adjustments to AccessibleName text:
1860 "E to the power of x" goes back to "E to the x"
1861 "Ten to the power of x" goes back to "Ten to the x"
1862 "Y to the power of x" goes back to "Y to the x"
1866 Overview of changes in gcalctool 4.2.102
1868 * (Bug #118247) Four small adjustments to AccessibleName text:
1869 "Random" becomes "Random number"
1870 "E to the x" becomes "E to the power of x"
1871 "Ten to the x" becomes "Ten to the power of x"
1872 "Y to the x" becomes "Y to the power of x"
1876 Overview of changes in gcalctool 4.2.101
1878 * Fixed bug 118247. Each gcalctool button now has an AccessibleName.
1882 Overview of changes in gcalctool 4.2.100
1884 * Fixed bug 117691. The GDK_Up, GDK_Down, GDK_Left and GDK_Right keysyms are
1885 not valid equivalents for the 8, 2, 4 and 6 keys. They are needed for
1886 keyboard navigation.
1890 Overview of changes in gcalctool 4.2.99
1892 * Bumped version number for GNOME 2.3.4 release, to include John's doc
1897 Overview of changes in gcalctool 4.2.98
1899 * Fixed bug 116944. Various HIG improvements to the edit constants, edit
1900 functions, and insert ASCII value dialogs.
1904 Overview of changes in gcalctool 4.2.97
1906 * Further work on bug 116727. A simpler fix was found.
1910 Overview of changes in gcalctool 4.2.96
1912 * Fixed bug 116727. When the calculator display is showing an error message,
1913 it is now correctly localized.
1917 Overview of changes in gcalctool 4.2.95
1919 * Fixed bug 115950. The "*" key wasn't being recognized as a keyboard
1920 shortcut for multiplication.
1924 Overview of changes in gcalctool 4.2.94
1926 * Further work on bug 114364. The items in the constants menu are now always
1927 displayed in the decimal numeric base. This is consistent with the way that
1928 calctool in the OpenWindows DeskSet worked.
1932 Overview of changes in gcalctool 4.2.93
1934 * Fixed bug 114364. When you select "Edit Constants" from the Con menu, the
1935 values of each constant are shown in Decimal. The label:
1936 "All constant values are specified in the decimal numeric base"
1937 has also been added to the "Edit Constant" popup to clarify this.
1941 Overview of changes in gcalctool 4.2.92
1943 * Fixed bug 115653. Adjusted the keyboard mnemonic checking code to now
1944 check to make sure that neither of the Alt keys is pressed when comparing
1945 against button equivalents.
1949 Overview of changes in gcalctool 4.2.91
1951 * Similar problem to bug #115212 but for the "Edit Constants" and
1952 "Edit Functions" dialog boxes. gcalctool no longer can display
1953 multiple versions of them.
1957 Overview of changes in gcalctool 4.2.90
1959 * Fixed bug 114363 (http://bugzilla.gnome.org/show_bug.cgi?id=114363)
1960 When an error condition occurs:
1962 - make insensitive all buttons except Clr.
1963 - make all Scientific mode toggles and checkboxes insensitive.
1964 - make all menubar items insensitive except:
1968 When the error condition is cleared, resensitise everything, setting
1969 the numeric base buttons correctly.
1973 Overview of changes in gcalctool 4.2.89
1975 * Fix for bug #115212. gcalctool no longer can display multiple About boxes.
1979 Overview of changes in gcalctool 4.2.88
1981 * Fix for bug #108209. The appropriate gcalctool button is now animated
1982 when the user enters that value via the keyboard.
1986 Overview of changes in gcalctool 4.2.87
1988 * Partial fix for bug 114363. When the calculator display is showing "Error",
1989 the Constant values and the Memory Register values no longer incorrectly
1990 show "Error" as well.
1994 Overview of changes in gcalctool 4.2.86
1996 * Fixed bug 113703. You can now specify an alternate location for
1997 the gcalctool schemas file with: --with-gconf-source=whatever
2001 Overview of changes in gcalctool 4.2.85
2003 * Fixed bug 113754. Decimal point didn't work with a German keyboard if
2004 Numlock was turned on.
2008 Overview of changes in gcalctool 4.2.84
2010 * Install "gnome-calculator" symlink as reqested by Glynn Foster.
2014 Overview of changes in gcalctool 4.2.83
2016 * Fixed Bugzilla bug 111269. It was possible to type fast into gcalctool
2017 and digits would be transposed.
2021 Overview of changes in gcalctool 4.2.82
2023 * Refixed bug 110416. Concatenated more error messages in mp.c.
2024 * Adjusted the Acc menu entries to be "<n> significant places" rather than
2026 * Replaced "kilometers per hour / miles per hour" with "kilometers per hour
2027 or miles per hour" in the first constant description.
2028 * Replaced occurances of "/" in the other constant descriptions with "or".
2032 Overview of changes in gcalctool 4.2.81
2034 * Translators: The documentation is now ready for translation!
2036 * Updated the following files:
2037 * configure.in: updated version number to 4.2.81
2038 * help/C/gcalctool.xml: first approved draft, ready for translation
2039 * help/C/gcalctool-C.omf: updated manual date and version number
2040 * help/C/l10n.txt: new file added
2041 * help/C/figures/gcalctool_edit_const_window.png: deleted
2042 * help/C/figures/gcalctool_edit_func_window.png: deleted
2043 * help/C/figures/gcalctool_ins_ascii_window.png: deleted
2044 * help/C/figures/gcalctool_mem_reg_window.png: deleted
2048 Overview of changes in gcalctool 4.2.80
2050 * Fixed Bugzilla bug 110416. Various fprintf statements in mp.c have been
2051 concatenated to help translators.
2055 Overview of changes in gcalctool 4.2.79
2057 * Added in latest online help changes from Breda McColgan. This should now
2058 put the online help in sync with the actual functionality of gcalctool.
2062 Overview of changes in gcalctool 4.2.78
2064 * Made translated menu entries actually visible. fixed some tooltips, added
2065 AC_PREREQ macro to configure.in.
2069 Overview of changes in gcalctool 4.2.77
2071 * This version announced on gnome-announce.
2075 Overview of changes in gcalctool 4.2.76
2077 * Slight adjustments to Bugzilla bug 108226 . Menu item is now
2078 "Show Trailing Zeroes", with a Control-T accelerator. Added a similar
2079 menu item to the View menu on the menu bar.
2083 Overview of changes in gcalctool 4.2.75
2085 * Fixed Bugzilla bug 108729.
2087 Added tooltips to the radio and check buttons in scientific mode.
2091 Overview of changes in gcalctool 4.2.74
2093 * Fixed Bugzilla bug 108226.
2095 The menu items in the Acc menu are now "tickable", so you know what the
2096 current accuracy selection is. Setting one of these clears the previous one.
2098 A new "remove trailing zeroes" menu item is added to the Acc menu (last
2099 item, with a separator just above), that is "tickable". This tick doesn't
2100 affect the accuracy ticks. It's either on or off.
2102 The default setting for accuracy now becomes 9 numeric places and "remove
2105 The Acc button is moved to the Scientific mode (clear slot in the top
2106 right corner, above the Rand.
2108 The Base radio button group and the display type radio button group in
2109 the mode panel in Scientific mode are now moved to the right side to be
2110 close in proximity to the Acc button. The other mode items move to the
2115 Overview of changes in gcalctool 4.2.73
2117 * Fixed Bugzilla bug 108208. The default value for the "showregisters"
2118 resource in gcalctool.schemas was incorrectly set.
2119 * There should be no "default:" action in the command line parsing in
2124 Overview of changes in gcalctool 4.2.72
2126 * Correctly fixed Bugzilla bug 108219. The previous fix didn't correct
2127 set the radio buttons when changing mode from Scientific to Basic or
2128 Financial. Only the internal state.
2132 Overview of changes in gcalctool 4.2.71
2134 * Further fix for Bugzilla bug 108209. Followup changes to make the numeric
2135 keypad animate the buttons on Linux machines.
2139 Overview of changes in gcalctool 4.2.70
2141 * Fixed Bugzilla bug 108219.
2142 When you go from Scientific mode to either Basic or Financial mode,
2143 the calculator will revert to "Dec" base in "Fix" notation.
2144 Any number in the display (and the memory registers if shown) will be
2145 converted accordingly.
2146 When you are in a mode (Basic, Financial, or Scientific) you will only
2147 be able to do the functionality that that mode shows.
2151 Overview of changes in gcalctool 4.2.69
2153 * Fixed Bugzilla bug 108333. The gcalctool buttons with menus associated
2154 with them are now keyboard navigable.
2158 Overview of changes in gcalctool 4.2.68
2160 * Fixed Bugzilla bug 108209. When the user uses the keyboard to enter data,
2161 the associated gcalctool button will be animated.
2165 Overview of changes in gcalctool 4.2.67
2167 * Fixed Bugzilla bug 108210. Main gcalctool window is no longer resizable.
2171 Overview of changes in gcalctool 4.2.66
2173 * Incorporated various changes to the online help Breda McColgan in
2174 the Sun GNOME doc. team. Translators, please do not translate yet.
2175 See ChangeLog for more information.
2179 Overview of changes in gcalctool 4.2.65
2181 * Added scrollkeeper checks into configure.in.
2182 * Fixed warning message:
2184 ** (gcalctool:27091): WARNING **: Help error: Unable to find the
2185 GNOME_FILE_DOMAIN_APP_HELP domain
2189 Overview of changes in gcalctool 4.2.64
2191 * Added in a first (draft) version of online help from Breda McColgan in
2192 the Sun GNOME doc. team. Translators, please do not translate yet. See
2193 ChangeLog for more information.
2197 Overview of changes in gcalctool 4.2.63
2199 * Abstracted the key values and modifiers.
2203 Overview of changes in gcalctool 4.2.62
2205 * Adjusted the tooltip help to be minimalist messages.
2209 Overview of changes in gcalctool 4.2.61
2211 * Small adjustment to allow gcalctool to compile using the Solaris Forte
2216 Overview of changes in gcalctool 4.2.60
2218 * Gcalctool wasn't saving the trigonometric type when it was changed.
2222 Overview of changes in gcalctool 4.2.59
2224 * Added Brazilian Portuguese (pt_BR) to ALL_LINGUAS.
2228 Overview of changes in gcalctool 4.2.58
2230 * Allows Backspace to now correctly work inside parentheses.
2234 Overview of changes in gcalctool 4.2.57
2236 * The Xor logical operation wasn't being performed correctly.
2237 * Hitting Clr was not correctly clearing the Hyp and Inv trigonometric
2242 Overview of changes in gcalctool 4.2.56
2244 * Removed the final period from the ten default constant descriptions.
2245 * Changed occurances of "kilometre" to "kilometer" and "centimetre" to
2247 * Fixed up the values of the ten default constant definitions in the
2249 * The "centimeters <=> inches" default constant should be 0.3937007
2250 rather than 2.54 to be consistent with the other constants.
2254 Overview of changes in gcalctool 4.2.55
2256 * Entering "(<Delete>)" no longer crashes gcalctool.
2260 Overview of changes in gcalctool 4.2.54
2262 * The financial Term tooltip example now works.
2263 * Moved the Exp button to the right of the Con and Fun buttons for better
2268 Overview of changes in gcalctool 4.2.53
2270 * Fixed Bugzilla bug 106501. Added bullet proofing to prevent user
2271 backspacing off the end of the display string.
2275 Overview of changes in gcalctool 4.2.52
2277 * Toggled the positions of the Sto and Rcl buttons.
2281 Overview of changes in gcalctool 4.2.51
2283 * No longer crashes if the user Pastes in an empty clipboard value.
2284 * Now uses a text view for its display widget.
2288 Overview of changes in gcalctool 4.2.50
2290 * Fixes to the manual page:
2291 - the keyboard shortcut for the "Term" function is "t" not "T".
2292 - removed the LOGICAL mode section.
2296 Overview of changes in gcalctool 4.2.49
2298 * The display label and mode no longer expand when the calculator is resized.
2299 * Replace the three characters of white space in the title bar text with one
2300 space character, so more of the title fits into the task window list applet.
2302 Overview of changes in gcalctool 4.2.48
2304 * Added a launcher to the GNOME's Accessories menu.
2308 Overview of changes in gcalctool 4.2.47
2310 * Marks the menu labels for translation.
2314 Overview of changes in gcalctool 4.2.46
2316 * Various cleanup, to make gcalctool be more like other GNOME applications.
2320 Overview of changes in gcalctool 4.2.45
2322 * Fixed Bugzilla bug 104249. The UI for adding new or editing existing
2323 constants and/or functions has been improved.
2327 Overview of changes in gcalctool 4.2.44
2329 * Fixed Bugzilla bug 104830. gcalctool now uses gnome-calc3.png as its icon
2330 (same as the current gnome-calculator)
2334 Overview of changes in gcalctool 4.2.43
2336 * Further slight adjustments needed to fix Bugzilla bug 104248. The memory
2337 registers window now displays correctly again.
2338 * Fixed Bugzilla bug 104240. The "File" menubar item is now called
2339 "Calculator", and there is a set of unique mnemonics for the various
2340 items in the Scientific mode panel. The gcalctool manual pages have been
2341 updated to reflect these changes.
2342 * Added in a Control-I mnemonic for Edit->Insert ASCII Value.
2343 Added in a Control-A mnemonic for Help->About.
2347 Overview of changes in gcalctool 4.2.42
2349 * Fixed Bugzilla bug 104248. The View->Memory Registers menu item's toggle
2350 is now set correctly depending upon whether the memory register windows
2351 is visible or hidden.
2352 * The correct radio item is now set in the View menu mode menu item entries
2353 if gcalctool is initially started in Financial or Scientific mode.
2357 Overview of changes in gcalctool 4.2.41
2359 * The constant and function definitions are now read and written as Gconf
2361 * Fixed Bugzilla bug 104250. The constant and the function menu items now
2362 have "C<n>:" and "F<n>:" prefixes respectively, where <n> is the
2363 constant/function number.
2367 Overview of changes in gcalctool 4.2.40
2369 * Fixed Bugzilla bug 104245. The View->Basic Mode, Financial Mode,
2370 Scientific Mode and Memory Registers now have keyboard accelerators
2371 (Control-B, Control-F, Control-S and Control-M respectively).
2375 Overview of changes in gcalctool 4.2.39
2377 * Further slight adjustments for Bugzilla bug 104287
2378 The insert button isthe default button.
2379 The dialog is no longer resizable.
2380 The ESC key can now be used to cancel the dialog.
2384 Overview of changes in gcalctool 4.2.38
2386 * Fixed Bugzilla bug 104287. HIG improvements for the "Insert ASCII Value"
2391 Overview of changes in gcalctool 4.2.37
2393 * Fixed Bugzilla bug 104241. The Insert ASCII Value" menu item is now
2394 "Insert ASCII Value..."
2395 * Tidied up the I18N code as gcalctool now includes <gnome.h> which includes
2396 <bonobo-i18n.h,> where all this stuff is already defined.
2400 Overview of changes in gcalctool 4.2.36
2402 * Fixed Bugzilla bug #102928. The x^2, e^x, 10^x and y^x keys now use
2403 Pango markup to display the label using superscripts.
2407 Overview of changes in gcalctool 4.2.35
2409 * Added in handling of the numeric keypad for Linux systems.
2413 Overview of changes in gcalctool 4.2.34
2415 * Handling of the users saved function definitions now works correctly.
2416 * Changed the keyboard accelerators for the following to use non Alt-<?>
2419 Cos (old value: Alt-c) becomes 'J'.
2420 Sin (old value: Alt-s) becomes 'K'.
2421 Tan (old value: Alt-t) becomes 'L'.
2422 Frac (old value: Alt-f) becomes ':'.
2423 Int (old value: Alt-i) becomes 'i'.
2424 Abs (old value: Alt-u) becomes 'u'.
2425 Rate (old value: Alt-r) becomes 'T'.
2426 * Removed the need to configure with "--enable-build-broken".
2430 Overview of changes in gcalctool 4.2.33
2432 * Adjusted the memory registers windows to use the same "R0: 0.00" format
2433 (bold for first part), as the Rcl, Sto and Exch menus.
2437 Overview of changes in gcalctool 4.2.32
2439 * The menu items for the Rcl, Sto and Exch menus now have the format
2440 "R0: 0.00", where the "R0:" part is in bold.
2441 * The keyboard accelerators for the menubar menu items are now working.
2445 Overview of changes in gcalctool 4.2.31
2447 * Updated the NEWS file with an overview of all the changes since v4.1.13.
2451 Overview of changes in gcalctool 4.2.30
2453 * Removed the gconf resource for getting/setting whether a beep is sounded
2454 on error. A beep will now always be sounded in such a case.
2455 * The writing out of the resources will now be immediately done when each
2456 of those functions changes.
2460 Overview of changes in gcalctool 4.2.29
2462 * Updated the manual pages to reflect the recent v4.2.xx changes.
2463 * Replaced the occurance of mktemp with mkstemp to placate the Gnu compiler
2468 Overview of changes in gcalctool 4.2.28
2470 * The real fix for displaying the icon.
2474 Overview of changes in gcalctool 4.2.27
2476 * Vastly improved keyboard navigation.
2477 * Control-F1 now toggles the displaying of tooltip help, so the "-h"
2478 command line option has been removed and the old-style event handling
2479 code has also been removed.
2480 * Added in a signal handler for the "delete" event for the main gcalctool
2481 window. The callback calls gtk_main_quit() to terminate the application.
2485 Overview of changes in gcalctool 4.2.26
2487 * HCI change. Attempt to correct disaplay the gcalctool icon.
2491 Overview of changes in gcalctool 4.2.25
2493 * HCI change. The Sto/Rcl/Exch menu items now show the current register
2498 Overview of changes in gcalctool 4.2.24
2500 * HCI change. All the radiobutton and checkbox items in the mode panel
2501 now have a mnemonic associated with them.
2505 Overview of changes in gcalctool 4.2.23
2507 * HCI change. Fixed up the buttons on the "Insert ASCII Value", "Enter
2508 Constant..." and "Enter Function..." popups. They now just use Cancel
2509 and OK buttons, and use standard stock Gtk icons.
2513 Overview of changes in gcalctool 4.2.22
2515 * HCI change. Added in an Edit->Paste menu item. If selected this will
2516 paste the current contents of the clipboard into the calculator display
2517 as if you'd typed it.
2518 * Added bullet proofing to protect the calculator against values that
2519 weren't found. If a value wasn't found, it's just ignored, and it goes
2520 on to process the next character in the string.
2521 * Improved the handling of the recognition of characters entered. It now
2522 takes into effect the mods value for each keysym.
2526 Overview of changes in gcalctool 4.2.21
2528 * HCI change. Added a 2 pixel border for the frames containing the Basic,
2529 Financial and Scientific buttons and the mode panel.
2533 Overview of changes in gcalctool 4.2.20
2535 * HCI change. Removed the "operand item" label widget.
2539 Overview of changes in gcalctool 4.2.19
2541 * The frames around the mode button tables and the mode panel are no longer
2546 Overview of changes in gcalctool 4.2.18
2548 * Fixed Bugzilla bug #101865. Remade various keyboard remappings:
2549 * Removed mention of the "-l" and "-r" command line options from the manual
2550 pages. Remove reference to the /schemes/apps/gcalctool/righthanded Gconf
2555 Overview of changes in gcalctool 4.2.17
2557 * Removed the "Keys" key, that allowed you to toggle the button labels to
2558 show their keyboard equivalents.
2562 Overview of changes in gcalctool 4.2.16
2564 * Put each of the the button tables and the mode panel inside a frame, rather
2565 then use horizontal separators, to try to make the GUI look nicer.
2569 Overview of changes in gcalctool 4.2.15
2571 * Entering "((2+3)*(2+3))" now gives the correct answer.
2572 * Added some bullet-proofing to parentheses handling when bogus characters
2577 Overview of changes in gcalctool 4.2.14
2579 * Hooked up the Help->Contents menu item. Note that help support still has
2580 to be included (i.e. a help subdirectory with associated files etc.).
2584 Overview of changes in gcalctool 4.2.13
2586 * The View->Memory Registers menu item now correctly toggles the showing of
2587 the memory register window.
2591 Overview of changes in gcalctool 4.2.12
2593 * Menubar menu items now use stock Gtk icons (where applicable).
2597 Overview of changes in gcalctool 4.2.11
2599 * Revised the gcalctoolrc (Gtk resources) file for the new display layout.
2603 Overview of changes in gcalctool 4.2.10
2605 * Going into Scientific mode and clicking on "(" twice no longer causes a
2606 segmentation violation.
2610 Overview of changes in gcalctool 4.2.9
2612 * Added some horizontal separators to help make the calculator more readable
2613 when in Financial and Scientific Mode.
2617 Overview of changes in gcalctool 4.2.8
2619 * Entering "((2+3)*9+(5-3))" no longer causes a segmentation violation.
2623 Overview of changes in gcalctool 4.2.7
2625 * Removed the attempt to display a calculator image on the About popup.
2626 * Typing the keyboard equivalent of the menu buttons now works.
2627 * Removed the VERSION string from the titlebar. This is now in the About popup
2631 Overview of changes in gcalctool 4.2.6
2633 * Added in an About popup that's accessible through the Help->About Gcalctool
2634 menubar Help menu item.
2638 Overview of changes in gcalctool 4.2.5
2640 * Fixed Bugzilla bug #102927.
2641 Replaced abbreviation "trig." with full word "trigonometric".
2645 Overview of changes in gcalctool 4.2.4
2647 * Fixed Bugzilla bug #102922.
2648 Adjusted two occurances of sentence fragments to make it easier for
2649 L10N folks to translate them.
2653 Overview of changes in gcalctool 4.2.3
2655 * Added Spanish (es) to ALL_LINGUAS at configure.in
2656 * gcalctool is now resizable again.
2660 Overview of changes in gcalctool 4.2.2
2662 * Made calculator window choose a reasonable size at startup, and resize
2663 when changing modes.
2667 Overview of changes in gcalctool 4.2.1
2669 * Removed the GNOME_UTIL_LIBS line in gcalctool/Makefile.am so that
2670 gcalctool will correctly build.
2674 Overview of changes in gcalctool 4.2.0
2676 * The gcalctool GUI layout has been redone to make the Basic mode more
2677 basic and to make the application more GNOMEish.
2678 * The Financial/Logical/Scientific mode buttons have been moved into
2679 the main calculator window above the Basic mode buttons. The Logical
2680 and Scientific modes have been combined.
2682 * The six item mode display has been removed and a mode panel added for
2683 the scientific mode.
2684 * Removed the property sheet. gcalctool no longer has a left or right
2686 * Blank buttons are now correctly hidden.
2687 * Added a "--enable-build-broken" flag to configure that has to be present
2688 in order to configure and build gcalctool while it's still in a semi-broken
2693 Overview of changes in gcalctool 4.1.27
2695 * Fixed Bugzilla bug #101782.
2696 Removed trailing "\n"'s where possible in the tooltip help messages.
2700 Overview of changes in gcalctool 4.1.26
2702 * Fixed Bugzilla bug #101861.
2703 The size of the memory register window is no longer hard-wired.
2707 Overview of changes in gcalctool 4.1.25
2709 * Fixed Bugzilla bug #101867.
2710 Changed multiply key from "X" to "*" (same as the existing gnome-calculator).
2714 Overview of changes in gcalctool 4.1.24
2716 * Fixed Bugzilla bug #101780.
2717 Removed leading and trailing spaces from the labels for the gcalctool buttons.
2721 Overview of changes in gcalctool 4.1.23
2723 * Fixed Bugzilla bug #101777.
2724 Removed trailing periods on the four window titles.
2728 Overview of changes in gcalctool 4.1.22
2730 * Various I18N changes.
2734 Overview of changes in gcalctool 4.1.21
2736 * Various I18N changes.
2740 Overview of changes in gcalctool 4.1.20
2742 * Fixed Sun Bugtraq bug #1102883 against DeskSet calctool:
2743 Adjusted so that all error messages just display "Error" which is
2748 Overview of changes in gcalctool 4.1.19
2750 * Fixed Sun Bugtraq bug #4006391 against CDE dtcalc:
2751 Bring up gcalctool, enter 10000 X 0.58 =, get answer is 5800.
2752 Then click on Int button, supposely should get 5800, but the answer was 5799.
2756 Overview of changes in gcalctool 4.1.18
2758 * Fixed Sun Bugtraq bug #1258472 against CDE dtcalc:
2759 Start up gcalctool and set to decimal and fixed. Set accuracy to 2 decimal
2760 places. Do a division like 0.19/2 It gives 0.0A.
2764 Overview of changes in gcalctool 4.1.17
2766 * Fixed Bugtraq bug #1190181 against OpenWindows DeskSet calctool:
2767 gcalctool core dumped if parent directory was not readable.
2771 Overview of changes in gcalctool 4.1.16
2773 * Updated TODO file with all relevant calculator Sun bugs and rfes.
2774 * Adjusted matherr() routine so that strict ANCI C compilers can compile it.
2775 * Mode windows now shows buttons correctly if you start up in Basic mode,
2776 then try to show one of the other modes.
2780 Overview of changes in gcalctool 4.1.15
2782 * "Keys" button now displays correctly if started with left-handed style.
2783 * Switching handed style now displays button labels correctly if currently
2784 showing the keyboard equivalent.
2788 Overview of changes in gcalctool 4.1.14
2790 * Buttons are colored correctly if started with left-handed style.
2794 Overview of changes in gcalctool 4.1.13
2796 * The unused buttons in the mode window are now hidden.
2800 Overview of changes in gcalctool 4.1.12
2802 * Added gconf support, removing the use of X11 resources.
2806 Overview of changes in gcalctool 4.1.11
2808 * Explicitly setting the size of the calculator buttons has been removed.
2809 * The width of the mode window is now set to the width of the main window.
2813 Overview of changes in gcalctool 4.1.10
2815 * Fixes for I18N support.
2819 Overview of changes in gcalctool 4.1.9
2821 * Now that gcalctool is using Gtk resources to determine the appearance of
2822 the calculator, there is no need to use the custom display_frame widget.
2823 * The calculator display area now has tooltip help.
2827 Overview of changes in gcalctool 4.1.8
2829 * Fixed up mistakes is the gcalctool tooltip help text.
2830 * Three keyboard accelerators weren't working when a "menu" button had been
2831 pressed and the calculator was in pending mode:
2832 Base button - "o" (octal).
2833 Mode button - "l" (logical).
2834 Trig button - "g" (gradient).
2835 * The + and . keys on the numeric keypad now work.
2839 Overview of changes in gcalctool 4.1.7
2841 * Added in help support. Hitting the Help key will toggle whether tooltip
2842 help messages are displayed for the various buttons and other widgets.
2844 By default tooltips are disabled. Start gcalctool with the "-h" command
2845 line option will enable them. There is also a "gcalctool.showhelp"
2846 resource that can enable/disable them.
2850 Overview of changes in gcalctool 4.1.6
2852 * The new Constant/Function popup now has the various items aligned.
2856 Overview of changes in gcalctool 4.1.5
2858 * The size of the buttons in the Mode window are incorrect if the unused ones
2859 are not shown. Solved this my simply making the unused ones insnsitive, and
2864 Overview of changes in gcalctool 4.1.4
2867 * Keyboard accelerators now work for the gcalctool "menu" buttons.
2871 Overview of changes in gcalctool 4.1.3
2873 * The constant and function definitions are now read and written to a file
2874 named ~/.gcalctoolcf.
2875 * gcalctool now also tries to read a ~/.gcalctoolrc file at startup time.
2876 This file (if it exists) can contain resources for changing the appearance
2877 of the application. A gcalctoolrc file is now also included with the
2878 gcalctool distribution, which gives the old OpenWindows DeskSet appearance
2880 * The ability to change various colors via X resources has also been removed.
2881 The manual pages have been updated to reflect this.
2885 Overview of changes in gcalctool 4.1.2
2887 * Starting gcalctool then switching hands to left-handed, then using the
2888 keyboard for input, wrongly associated the various keyboard accelerators
2889 for the swapped keys.
2893 Overview of changes in gcalctool 4.1.1
2895 * Now finds the X11 libraries in a platform independent way.
2896 * Fixed up the gcalctool usage message.
2897 * Fixed up the gcalctool manual pages.
2898 * gcalctool now looks for ~/.gcalctoolrc and ~/.gcalctooldefaults files.
2899 * X resources are now "gcalctool.<whatever" rather than "calctool.<whatever>".
2903 Overview of changes in gcalctool 4.1.0
2905 * Graphics driver is now based on Gtk2.
2909 Overview of changes in calctool 4.0.0
2911 * Code based on the calctool in the OpenWindows Deskset for Solaris 8.
2912 * Adjusted to use an autoconf/automake configuration and build environment.
2913 * Adjusted the code to a K&R style.
2914 * Incorporated in needed code from the libguide and libdeskset libraries.
2915 * Released under a GNU LIBRARY GENERAL PUBLIC LICENSE (LGPL) license.
2916 * Just an XView graphics driver currently provided.