3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 #rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info
="NO" # Enables display of informational messages at boot.
26 rc_startmsgs
="YES" # Show "Starting foo:" messages at boot
27 rcshutdown_timeout
="90" # Seconds to wait before terminating rc.shutdown
28 early_late_divider
="FILESYSTEMS" # Script that separates early/late
29 # stages of the boot process. Make sure you know
30 # the ramifications if you change this.
31 # See rc.conf(5) for more details.
32 always_force_depends
="NO" # Set to check that indicated dependencies are
33 # running during boot (can increase boot time).
35 apm_enable
="NO" # Set to YES to enable APM BIOS functions (or NO).
36 apmd_enable
="NO" # Run apmd to handle APM event from userland.
37 apmd_flags
="" # Flags to apmd (if enabled).
38 ddb_enable
="NO" # Set to YES to load ddb scripts at boot.
39 ddb_config
="/etc/ddb.conf" # ddb(8) config file.
40 devd_enable
="YES" # Run devd, to trigger programs on device tree changes.
41 devd_flags
="" # Additional flags for devd(8).
42 #kld_list="" # Kernel modules to load after local disks are mounted
43 kldxref_enable
="NO" # Build linker.hints files with kldxref(8).
44 kldxref_clobber
="NO" # Overwrite old linker.hints at boot.
45 kldxref_module_path
="" # Override kern.module_path. A ';'-delimited list.
46 powerd_enable
="NO" # Run powerd to lower our power usage.
47 powerd_flags
="" # Flags to powerd (if enabled).
48 tmpmfs
="AUTO" # Set to YES to always create an mfs /tmp, NO to never
49 tmpsize
="20m" # Size of mfs /tmp if created
50 tmpmfs_flags
="-S" # Extra mdmfs options for the mfs /tmp
51 varmfs
="AUTO" # Set to YES to always create an mfs /var, NO to never
52 varsize
="32m" # Size of mfs /var if created
53 varmfs_flags
="-S" # Extra mount options for the mfs /var
54 populate_var
="AUTO" # Set to YES to always (re)populate /var, NO to never
55 cleanvar_enable
="YES" # Clean the /var directory
56 local_startup
="/usr/local/etc/rc.d" # startup script dirs.
57 script_name_sep
=" " # Change if your startup scripts' names contain spaces
58 rc_conf_files
="/etc/rc.conf /etc/rc.conf.local"
61 zfs_enable
="NO" # Set to YES to automatically mount ZFS file systems
63 gptboot_enable
="YES" # GPT boot success/failure reporting.
65 # Experimental - test before enabling
66 gbde_autoattach_all
="NO" # YES automatically mounts gbde devices from fstab
67 gbde_devices
="NO" # Devices to automatically attach (list, or AUTO)
68 gbde_attach_attempts
="3" # Number of times to attempt attaching gbde devices
69 gbde_lockdir
="/etc" # Where to look for gbde lockfiles
71 # GELI disk encryption configuration.
72 geli_devices
="" # List of devices to automatically attach in addition to
73 # GELI devices listed in /etc/fstab.
74 geli_tries
="" # Number of times to attempt attaching geli device.
75 # If empty, kern.geom.eli.tries will be used.
76 geli_default_flags
="" # Default flags for geli(8).
77 geli_autodetach
="YES" # Automatically detach on last close.
78 # Providers are marked as such when all file systems are
81 #geli_devices="da1 mirror/home"
82 #geli_da1_flags="-p -k /etc/geli/da1.keys"
83 #geli_da1_autodetach="NO"
84 #geli_mirror_home_flags="-k /etc/geli/home.keys"
86 root_rw_mount
="YES" # Set to NO to inhibit remounting root read-write.
87 root_hold_delay
="30" # Time to wait for root mount hold release.
88 fsck_y_enable
="NO" # Set to YES to do fsck -y if the initial preen fails.
89 fsck_y_flags
="" # Additional flags for fsck -y
90 background_fsck
="YES" # Attempt to run fsck in the background where possible.
91 background_fsck_delay
="60" # Time to wait (seconds) before starting the fsck.
92 netfs_types
="nfs:NFS smbfs:SMB" # Net filesystems.
93 extra_netfs_types
="NO" # List of network extra filesystem types for delayed
94 # mount at startup (or NO).
96 ##############################################################
97 ### Network configuration sub-section ######################
98 ##############################################################
100 ### Basic network and firewall/security options: ###
101 hostname
="" # Set this!
102 hostid_enable
="YES" # Set host UUID.
103 hostid_file
="/etc/hostid" # File with hostuuid.
104 nisdomainname
="NO" # Set to NIS domain if using NIS (or NO).
105 dhclient_program
="/sbin/dhclient" # Path to dhcp client program.
106 dhclient_flags
="" # Extra flags to pass to dhcp client.
107 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
108 background_dhclient
="NO" # Start dhcp client in the background.
109 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
110 synchronous_dhclient
="NO" # Start dhclient directly on configured
111 # interfaces during startup.
112 defaultroute_delay
="30" # Time to wait for a default route on a DHCP interface.
113 defaultroute_carrier_delay
="5" # Time to wait for carrier while waiting for a default route.
114 netif_enable
="YES" # Set to YES to initialize network interfaces
115 netif_ipexpand_max
="2048" # Maximum number of IP addrs in a range spec.
116 wpa_supplicant_program
="/usr/sbin/wpa_supplicant"
117 wpa_supplicant_flags
="-s" # Extra flags to pass to wpa_supplicant
118 wpa_supplicant_conf_file
="/etc/wpa_supplicant.conf"
120 firewall_enable
="NO" # Set to YES to enable firewall functionality
121 firewall_script
="/etc/rc.firewall" # Which script to run to set up the firewall
122 firewall_type
="UNKNOWN" # Firewall type (see /etc/rc.firewall)
123 firewall_quiet
="NO" # Set to YES to suppress rule display
124 firewall_logging
="NO" # Set to YES to enable events logging
125 firewall_logif
="NO" # Set to YES to create logging-pseudo interface
126 firewall_flags
="" # Flags passed to ipfw when type is a file
127 firewall_coscripts
="" # List of executables/scripts to run after
128 # firewall starts/stops
129 firewall_client_net
="192.0.2.0/24" # IPv4 Network address for "client"
131 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
133 firewall_simple_iif
="ed1" # Inside network interface for "simple"
135 firewall_simple_inet
="192.0.2.16/28" # Inside network address for "simple"
137 firewall_simple_oif
="ed0" # Outside network interface for "simple"
139 firewall_simple_onet
="192.0.2.0/28" # Outside network address for "simple"
141 #firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
143 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
144 # for "simple" firewall.
145 #firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
147 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
148 # for "simple" firewall.
149 firewall_myservices
="" # List of TCP ports on which this host
150 # offers services for "workstation" firewall.
151 firewall_allowservices
="" # List of IPs which have access to
152 # $firewall_myservices for "workstation"
154 firewall_trusted
="" # List of IPs which have full access to this
155 # host for "workstation" firewall.
156 firewall_logdeny
="NO" # Set to YES to log default denied incoming
157 # packets for "workstation" firewall.
158 firewall_nologports
="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
159 # for which denied incoming packets are not
160 # logged for "workstation" firewall.
161 firewall_nat_enable
="NO" # Enable kernel NAT (if firewall_enable == YES)
162 firewall_nat_interface
="" # Public interface or IPaddress to use
163 firewall_nat_flags
="" # Additional configuration parameters
164 dummynet_enable
="NO" # Load the dummynet(4) module
165 ip_portrange_first
="NO" # Set first dynamically allocated port
166 ip_portrange_last
="NO" # Set last dynamically allocated port
167 ike_enable
="NO" # Enable IKE daemon (usually racoon or isakmpd)
168 ike_program
="/usr/local/sbin/isakmpd" # Path to IKE daemon
169 ike_flags
="" # Additional flags for IKE daemon
170 ipsec_enable
="NO" # Set to YES to run setkey on ipsec_file
171 ipsec_file
="/etc/ipsec.conf" # Name of config file for setkey
172 natd_program
="/sbin/natd" # path to natd, if you want a different one.
173 natd_enable
="NO" # Enable natd (if firewall_enable == YES).
174 natd_interface
="" # Public interface or IPaddress to use.
175 natd_flags
="" # Additional flags for natd.
176 ipfilter_enable
="NO" # Set to YES to enable ipfilter functionality
177 ipfilter_program
="/sbin/ipf" # where the ipfilter program lives
178 ipfilter_rules
="/etc/ipf.rules" # rules definition file for ipfilter, see
179 # /usr/src/contrib/ipfilter/rules for examples
180 ipfilter_flags
="" # additional flags for ipfilter
181 ipnat_enable
="NO" # Set to YES to enable ipnat functionality
182 ipnat_program
="/sbin/ipnat" # where the ipnat program lives
183 ipnat_rules
="/etc/ipnat.rules" # rules definition file for ipnat
184 ipnat_flags
="" # additional flags for ipnat
185 ipmon_enable
="NO" # Set to YES for ipmon; needs ipfilter or ipnat
186 ipmon_program
="/sbin/ipmon" # where the ipfilter monitor program lives
187 ipmon_flags
="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
188 ipfs_enable
="NO" # Set to YES to enable saving and restoring
189 # of state tables at shutdown and boot
190 ipfs_program
="/sbin/ipfs" # where the ipfs program lives
191 ipfs_flags
="" # additional flags for ipfs
192 pf_enable
="NO" # Set to YES to enable packet filter (pf)
193 pf_rules
="/etc/pf.conf" # rules definition file for pf
194 pf_program
="/sbin/pfctl" # where the pfctl program lives
195 pf_flags
="" # additional flags for pfctl
196 pflog_enable
="NO" # Set to YES to enable packet filter logging
197 pflog_logfile
="/var/log/pflog" # where pflogd should store the logfile
198 pflog_program
="/sbin/pflogd" # where the pflogd program lives
199 pflog_flags
="" # additional flags for pflogd
200 ftpproxy_enable
="NO" # Set to YES to enable ftp-proxy(8) for pf
201 ftpproxy_flags
="" # additional flags for ftp-proxy(8)
202 pfsync_enable
="NO" # Expose pf state to other hosts for syncing
203 pfsync_syncdev
="" # Interface for pfsync to work through
204 pfsync_syncpeer
="" # IP address of pfsync peer host
205 pfsync_ifconfig
="" # Additional options to ifconfig(8) for pfsync
206 tcp_extensions
="YES" # Set to NO to turn off RFC1323 extensions.
207 log_in_vain
="0" # >=1 to log connects to ports w/o listeners.
208 tcp_keepalive
="YES" # Enable stale TCP connection timeout (or NO).
209 tcp_drop_synfin
="NO" # Set to YES to drop TCP packets with SYN+FIN
210 # NOTE: this violates the TCP specification
211 icmp_drop_redirect
="NO" # Set to YES to ignore ICMP REDIRECT packets
212 icmp_log_redirect
="NO" # Set to YES to log ICMP REDIRECT packets
213 network_interfaces
="auto" # List of network interfaces (or "auto").
214 cloned_interfaces
="" # List of cloned network interfaces to create.
215 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
216 #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
217 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
218 #ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
219 #ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
220 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
221 #vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device
222 #create_args_vlan0="vlan 102" # vlan tag for vlan0 device
223 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
224 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8)
225 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
227 #autobridge_interfaces="bridge0" # List of bridges to check
228 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
230 # If you have any sppp(4) interfaces above, you might also want to set
231 # the following parameters. Refer to spppcontrol(8) for their meaning.
232 sppp_interfaces
="" # List of sppp interfaces.
233 #sppp_interfaces="...0" # example: sppp over ...
234 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
236 # User ppp configuration.
237 ppp_enable
="NO" # Start user-ppp (or NO).
238 ppp_program
="/usr/sbin/ppp" # Path to user-ppp program.
239 ppp_mode
="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
240 # For details see man page for ppp(8). Default is auto.
241 ppp_nat
="YES" # Use PPP's internal network address translation or NO.
242 ppp_profile
="papchap" # Which profile to use from /etc/ppp/ppp.conf.
243 ppp_user
="root" # Which user to run ppp as
245 # Start multiple instances of ppp at boot time
246 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
247 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
248 #ppp_profile2_nat="NO" # Override nat mode for profile2
249 # profile3 uses default ppp_mode and ppp_nat
251 ### Network daemon (miscellaneous) ###
252 hostapd_enable
="NO" # Run hostap daemon.
253 syslogd_enable
="YES" # Run syslog daemon (or NO).
254 syslogd_program
="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
255 syslogd_flags
="-s" # Flags to syslogd (if enabled).
256 syslogd_oomprotect
="YES" # Don't kill syslogd when swap space is exhausted.
257 altlog_proglist
="" # List of chrooted applicatioins in /var
258 inetd_enable
="NO" # Run the network daemon dispatcher (YES/NO).
259 inetd_program
="/usr/sbin/inetd" # path to inetd, if you want a different one.
260 inetd_flags
="-wW -C 60" # Optional flags to inetd
261 iscsid_enable
="NO" # iSCSI initiator daemon.
262 iscsictl_enable
="NO" # iSCSI initiator autostart.
263 iscsictl_flags
="-Aa" # Optional flags to iscsictl.
264 hastd_enable
="NO" # Run the HAST daemon (YES/NO).
265 hastd_program
="/sbin/hastd" # path to hastd, if you want a different one.
266 hastd_flags
="" # Optional flags to hastd.
267 ctld_enable
="NO" # CAM Target Layer / iSCSI target daemon.
268 local_unbound_enable
="NO" # local caching resolver
271 # kerberos. Do not run the admin daemons on slave servers
273 kdc_enable
="NO" # Run a kerberos 5 KDC (or NO).
274 kdc_program
="/usr/libexec/kdc" # path to kerberos 5 KDC
275 kdc_flags
="" # Additional flags to the kerberos 5 KDC
276 kadmind_enable
="NO" # Run kadmind (or NO)
277 kadmind_program
="/usr/libexec/kadmind" # path to kadmind
278 kpasswdd_enable
="NO" # Run kpasswdd (or NO)
279 kpasswdd_program
="/usr/libexec/kpasswdd" # path to kpasswdd
280 kfd_enable
="NO" # Run kfd (or NO)
281 kfd_program
="/usr/libexec/kfd" # path to kerberos 5 kfd daemon
283 ipropd_master_enable
="NO" # Run Heimdal incremental propagation daemon
285 ipropd_master_program
="/usr/libexec/ipropd-master"
286 ipropd_master_flags
="" # Flags to ipropd-master.
287 ipropd_master_keytab
="/etc/krb5.keytab" # keytab for ipropd-master.
288 ipropd_master_slaves
="" # slave node names used for /var/heimdal/slaves.
289 ipropd_slave_enable
="NO" # Run Heimdal incremental propagation daemon
291 ipropd_slave_program
="/usr/libexec/ipropd-slave"
292 ipropd_slave_flags
="" # Flags to ipropd-slave.
293 ipropd_slave_keytab
="/etc/krb5.keytab" # keytab for ipropd-slave.
294 ipropd_slave_master
="" # master node name.
296 gssd_enable
="NO" # Run the gssd daemon (or NO).
297 gssd_program
="/usr/sbin/gssd" # Path to gssd.
298 gssd_flags
="" # Flags for gssd.
300 rwhod_enable
="NO" # Run the rwho daemon (or NO).
301 rwhod_flags
="" # Flags for rwhod
302 rarpd_enable
="NO" # Run rarpd (or NO).
303 rarpd_flags
="-a" # Flags to rarpd.
304 bootparamd_enable
="NO" # Run bootparamd (or NO).
305 bootparamd_flags
="" # Flags to bootparamd
306 pppoed_enable
="NO" # Run the PPP over Ethernet daemon.
307 pppoed_provider
="*" # Provider and ppp(8) config file entry.
308 pppoed_flags
="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
309 pppoed_interface
="fxp0" # The interface that pppoed runs on.
310 sshd_enable
="NO" # Enable sshd
311 sshd_program
="/usr/sbin/sshd" # path to sshd, if you want a different one.
312 sshd_flags
="" # Additional flags for sshd.
313 ftpd_enable
="NO" # Enable stand-alone ftpd.
314 ftpd_program
="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
315 ftpd_flags
="" # Additional flags to stand-alone ftpd.
317 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
318 amd_enable
="NO" # Run amd service with $amd_flags (or NO).
319 amd_program
="/usr/sbin/amd" # path to amd, if you want a different one.
320 amd_flags
="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
321 amd_map_program
="NO" # Can be set to "ypcat -k amd.master"
322 autofs_enable
="NO" # Run autofs daemons.
323 automount_flags
="" # Flags to automount(8) (if autofs enabled).
324 automountd_flags
="" # Flags to automountd(8) (if autofs enabled).
325 autounmountd_flags
="" # Flags to autounmountd(8) (if autofs enabled).
326 nfs_client_enable
="NO" # This host is an NFS client (or NO).
327 nfs_access_cache
="60" # Client cache timeout in seconds
328 nfs_server_enable
="NO" # This host is an NFS server (or NO).
329 nfs_server_flags
="-u -t" # Flags to nfsd (if enabled).
330 nfs_server_managegids
="NO" # The NFS server maps gids for AUTH_SYS (or NO).
331 mountd_enable
="NO" # Run mountd (or NO).
332 mountd_flags
="-r -S" # Flags to mountd (if NFS server enabled).
333 weak_mountd_authentication
="NO" # Allow non-root mount requests to be served.
334 nfs_reserved_port_only
="NO" # Provide NFS only on secure port (or NO).
335 nfs_bufpackets
="" # bufspace (in packets) for client
336 rpc_lockd_enable
="NO" # Run NFS rpc.lockd needed for client/server.
337 rpc_lockd_flags
="" # Flags to rpc.lockd (if enabled).
338 rpc_statd_enable
="NO" # Run NFS rpc.statd needed for client/server.
339 rpc_statd_flags
="" # Flags to rpc.statd (if enabled).
340 rpcbind_enable
="NO" # Run the portmapper service (YES/NO).
341 rpcbind_program
="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
342 rpcbind_flags
="" # Flags to rpcbind (if enabled).
343 rpc_ypupdated_enable
="NO" # Run if NIS master and SecureRPC (or NO).
344 keyserv_enable
="NO" # Run the SecureRPC keyserver (or NO).
345 keyserv_flags
="" # Flags to keyserv (if enabled).
346 nfsv4_server_enable
="NO" # Enable support for NFSv4
347 nfscbd_enable
="NO" # NFSv4 client side callback daemon
348 nfscbd_flags
="" # Flags for nfscbd
349 nfsuserd_enable
="NO" # NFSv4 user/group name mapping daemon
350 nfsuserd_flags
="" # Flags for nfsuserd
352 ### Network Time Services options: ###
353 timed_enable
="NO" # Run the time daemon (or NO).
354 timed_flags
="" # Flags to timed (if enabled).
355 ntpdate_enable
="NO" # Run ntpdate to sync time on boot (or NO).
356 ntpdate_program
="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
357 ntpdate_flags
="-b" # Flags to ntpdate (if enabled).
358 ntpdate_config
="/etc/ntp.conf" # ntpdate(8) configuration file
359 ntpdate_hosts
="" # Whitespace-separated list of ntpdate(8) servers.
360 ntpd_enable
="NO" # Run ntpd Network Time Protocol (or NO).
361 ntpd_program
="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
362 ntpd_config
="/etc/ntp.conf" # ntpd(8) configuration file
363 ntpd_sync_on_start
="NO" # Sync time on ntpd startup, even if offset is high
364 ntpd_flags
="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
365 # Flags to ntpd (if enabled).
366 ntp_src_leapfile
="/etc/ntp/leap-seconds"
367 # Initial source for ntpd leapfile
368 ntp_db_leapfile
="/var/db/ntpd.leap-seconds.list"
369 # Working copy (updated weekly) leapfile
370 ntp_leapfile_sources
="https://www.ietf.org/timezones/data/leap-seconds.list"
371 # Source from which to fetch leapfile
372 ntp_leapfile_fetch_opts
="-mq" # Options to use for ntp leapfile fetch,
373 # e.g. --no-verify-peer
374 ntp_leapfile_expiry_days
=30 # Check for new leapfile 30 days prior to
376 ntp_leapfile_fetch_verbose
="NO" # Be verbose during NTP leapfile fetch
378 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
379 nis_client_enable
="NO" # We're an NIS client (or NO).
380 nis_client_flags
="" # Flags to ypbind (if enabled).
381 nis_ypset_enable
="NO" # Run ypset at boot time (or NO).
382 nis_ypset_flags
="" # Flags to ypset (if enabled).
383 nis_server_enable
="NO" # We're an NIS server (or NO).
384 nis_server_flags
="" # Flags to ypserv (if enabled).
385 nis_ypxfrd_enable
="NO" # Run rpc.ypxfrd at boot time (or NO).
386 nis_ypxfrd_flags
="" # Flags to rpc.ypxfrd (if enabled).
387 nis_yppasswdd_enable
="NO" # Run rpc.yppasswdd at boot time (or NO).
388 nis_yppasswdd_flags
="" # Flags to rpc.yppasswdd (if enabled).
391 # Be sure to understand the security implications of running SNMP v1/v2
393 bsnmpd_enable
="NO" # Run the SNMP daemon (or NO).
394 bsnmpd_flags
="" # Flags for bsnmpd.
396 ### Network routing options: ###
397 defaultrouter
="NO" # Set to default gateway (or NO).
398 static_arp_pairs
="" # Set to static ARP list (or leave empty).
399 static_ndp_pairs
="" # Set to static NDP list (or leave empty).
400 static_routes
="" # Set to static route list (or leave empty).
401 natm_static_routes
="" # Set to static route list for NATM (or leave empty).
402 gateway_enable
="NO" # Set to YES if this host will be a gateway.
403 routed_enable
="NO" # Set to YES to enable a routing daemon.
404 routed_program
="/sbin/routed" # Name of routing daemon to use if enabled.
405 routed_flags
="-q" # Flags for routing daemon.
406 arpproxy_all
="NO" # replaces obsolete kernel option ARP_PROXYALL.
407 forward_sourceroute
="NO" # do source routing (only if gateway_enable is set to "YES")
408 accept_sourceroute
="NO" # accept source routed packets to us
410 ### ATM interface options: ###
411 atm_enable
="NO" # Configure ATM interfaces (or NO).
412 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
413 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
414 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
415 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
416 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
417 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
418 atm_pvcs
="" # Set to PVC list (or leave empty).
419 atm_arps
="" # Set to permanent ARP list (or leave empty).
422 hcsecd_enable
="NO" # Enable hcsecd(8) (or NO)
423 hcsecd_config
="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
425 sdpd_enable
="NO" # Enable sdpd(8) (or NO)
426 sdpd_control
="/var/run/sdp" # sdpd(8) control socket
427 sdpd_groupname
="nobody" # set spdp(8) user/group to run as after
428 sdpd_username
="nobody" # it initializes
430 bthidd_enable
="NO" # Enable bthidd(8) (or NO)
431 bthidd_config
="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
432 bthidd_hids
="/var/db/bthidd.hids" # bthidd(8) known HID devices file
434 rfcomm_pppd_server_enable
="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
435 rfcomm_pppd_server_profile
="one two" # Profile to use from /etc/ppp/ppp.conf
437 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
438 rfcomm_pppd_server_one_channel
="1" # Override local channel for 'one'
439 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
440 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
442 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
443 rfcomm_pppd_server_two_channel
="3" # Override local channel for 'two'
444 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
445 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
447 ubthidhci_enable
="NO" # Switch an USB BT controller present on
448 #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
449 #ubthidhci_addr="2" # Check usbconfig list to find the correct
450 # numbers for your system.
452 ### Network link/usability verification options
453 netwait_enable
="NO" # Enable rc.d/netwait (or NO)
454 #netwait_ip="" # Wait for ping response from any IP in this list.
455 netwait_timeout
="60" # Total number of seconds to perform pings.
456 #netwait_if="" # Wait for active link on each intf in this list.
457 netwait_if_timeout
="30" # Total number of seconds to monitor link state.
459 ### Miscellaneous network options: ###
460 icmp_bmcastecho
="NO" # respond to broadcast ping packets
462 ### IPv6 options: ###
463 ipv6_network_interfaces
="auto" # List of IPv6 network interfaces
464 # (or "auto" or "none").
465 ipv6_activate_all_interfaces
="NO" # If NO, interfaces which have no
466 # corresponding $ifconfig_IF_ipv6 is
467 # marked as IFDISABLED for security
469 ipv6_defaultrouter
="NO" # Set to IPv6 default gateway (or NO).
470 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
471 ipv6_static_routes
="" # Set to static route list (or leave empty).
472 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
473 # route toward loopback interface.
474 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
475 ipv6_gateway_enable
="NO" # Set to YES if this host will be a gateway.
476 ipv6_cpe_wanif
="NO" # Set to the upstram interface name if this
477 # node will work as a router to forward IPv6
478 # packets not explicitly addressed to itself.
479 ipv6_privacy
="NO" # Use privacy address on RA-receiving IFs
482 route6d_enable
="NO" # Set to YES to enable an IPv6 routing daemon.
483 route6d_program
="/usr/sbin/route6d" # Name of IPv6 routing daemon.
484 route6d_flags
="" # Flags to IPv6 routing daemon.
485 #route6d_flags="-l" # Example for route6d with only IPv6 site local
487 #route6d_flags="-q" # If you want to run a routing daemon on an end
488 # node, you should stop advertisement.
489 #ipv6_network_interfaces="ed0 ep0" # Examples for router
490 # or static configuration for end node.
491 # Choose correct prefix value.
492 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
493 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
494 ipv6_default_interface
="NO" # Default output interface for scoped addrs.
495 # This works only with
496 # ipv6_gateway_enable="NO".
497 rtsol_flags
="" # Flags to IPv6 router solicitation.
498 rtsold_enable
="NO" # Set to YES to enable an IPv6 router
499 # solicitation daemon.
500 rtsold_flags
="-a" # Flags to an IPv6 router solicitation
502 rtadvd_enable
="NO" # Set to YES to enable an IPv6 router
503 # advertisement daemon. If set to YES,
504 # this router becomes a possible candidate
505 # IPv6 default router for local subnets.
506 rtadvd_interfaces
="" # Interfaces rtadvd sends RA packets.
507 mroute6d_enable
="NO" # Do IPv6 multicast routing.
508 mroute6d_program
="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
509 # routing daemon. You need to
510 # install it from package or
512 mroute6d_flags
="" # Flags to IPv6 multicast routing daemon.
513 stf_interface_ipv4addr
="" # Local IPv4 addr for 6to4 IPv6 over IPv4
514 # tunneling interface. Specify this entry
515 # to enable 6to4 interface.
516 stf_interface_ipv4plen
="0" # Prefix length for 6to4 IPv4 addr,
517 # to limit peer addr range. Effective value
519 stf_interface_ipv6_ifid
="0:0:0:1" # IPv6 interface id for stf0.
520 # If you like, you can set "AUTO" for this.
521 stf_interface_ipv6_slaid
="0000" # IPv6 Site Level Aggregator for stf0
522 ipv6_ipv4mapping
="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
523 # communication. (like ::ffff:a.b.c.d)
524 ipv6_ipfilter_rules
="/etc/ipf6.rules" # rules definition file for ipfilter,
525 # see /usr/src/contrib/ipfilter/rules
527 ip6addrctl_enable
="YES" # Set to YES to enable default address selection
528 ip6addrctl_verbose
="NO" # Set to YES to enable verbose configuration messages
529 ip6addrctl_policy
="AUTO" # A pre-defined address selection policy
530 # (ipv4_prefer, ipv6_prefer, or AUTO)
532 ##############################################################
533 ### System console options #################################
534 ##############################################################
536 keyboard
="" # keyboard device to use (default /dev/kbd0).
537 keymap
="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
538 keyrate
="NO" # keyboard rate to: slow, normal, fast (or NO).
539 keybell
="NO" # See kbdcontrol(1) for options. Use "off" to disable.
540 keychange
="NO" # function keys default values (or NO).
541 cursor
="NO" # cursor type {normal|blink|destructive} (or NO).
542 scrnmap
="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
543 font8x16
="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
544 font8x14
="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
545 font8x8
="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
546 blanktime
="300" # blank time (in seconds) or "NO" to turn it off.
547 saver
="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
548 moused_nondefault_enable
="YES" # Treat non-default mice as enabled unless
549 # specifically overriden in rc.conf(5).
550 moused_enable
="NO" # Run the mouse daemon.
551 moused_type
="auto" # See man page for rc.conf(5) for available settings.
552 moused_port
="/dev/psm0" # Set to your mouse port.
553 moused_flags
="" # Any additional flags to moused.
554 mousechar_start
="NO" # if 0xd0-0xd3 default range is occupied in your
555 # language code table, specify alternative range
556 # start like mousechar_start=3, see vidcontrol(1)
557 allscreens_flags
="" # Set this vidcontrol mode for all virtual screens
558 allscreens_kbdflags
="" # Set this kbdcontrol mode for all virtual screens
560 ##############################################################
561 ### Mail Transfer Agent (MTA) options ######################
562 ##############################################################
564 mta_start_script
="/etc/rc.sendmail"
565 # Script to start your chosen MTA, called by /etc/rc.
566 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
567 sendmail_enable
="NO" # Run the sendmail inbound daemon (YES/NO).
568 sendmail_pidfile
="/var/run/sendmail.pid" # sendmail pid file
569 sendmail_procname
="/usr/sbin/sendmail" # sendmail process name
570 sendmail_flags
="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
571 sendmail_cert_create
="YES" # Create a server certificate if none (YES/NO)
572 #sendmail_cert_cn="CN" # CN of the generate certificate
573 sendmail_submit_enable
="YES" # Start a localhost-only MTA for mail submission
574 sendmail_submit_flags
="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
575 # Flags for localhost-only MTA
576 sendmail_outbound_enable
="YES" # Dequeue stuck mail (YES/NO).
577 sendmail_outbound_flags
="-L sm-queue -q30m" # Flags to sendmail (outbound only)
578 sendmail_msp_queue_enable
="YES" # Dequeue stuck clientmqueue mail (YES/NO).
579 sendmail_msp_queue_flags
="-L sm-msp-queue -Ac -q30m"
580 # Flags for sendmail_msp_queue daemon.
581 sendmail_rebuild_aliases
="NO" # Run newaliases if necessary (YES/NO).
584 ##############################################################
585 ### Miscellaneous administrative options ###################
586 ##############################################################
588 auditd_enable
="NO" # Run the audit daemon.
589 auditd_program
="/usr/sbin/auditd" # Path to the audit daemon.
590 auditd_flags
="" # Which options to pass to the audit daemon.
591 auditdistd_enable
="NO" # Run the audit daemon.
592 auditdistd_program
="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
593 auditdistd_flags
="" # Which options to pass to the auditdistd daemon.
594 cron_enable
="YES" # Run the periodic job daemon.
595 cron_program
="/usr/sbin/cron" # Which cron executable to run (if enabled).
596 cron_dst
="YES" # Handle DST transitions intelligently (YES/NO)
597 cron_flags
="" # Which options to pass to the cron daemon.
598 lpd_enable
="NO" # Run the line printer daemon.
599 lpd_program
="/usr/sbin/lpd" # path to lpd, if you want a different one.
600 lpd_flags
="" # Flags to lpd (if enabled).
601 nscd_enable
="NO" # Run the nsswitch caching daemon.
602 chkprintcap_enable
="NO" # Run chkprintcap(8) before running lpd.
603 chkprintcap_flags
="-d" # Create missing directories by default.
604 dumpdev
="AUTO" # Device to crashdump to (device name, AUTO, or NO).
605 dumpdir
="/var/crash" # Directory where crash dumps are to be stored
606 savecore_enable
="YES" # Extract core from dump devices if any
607 savecore_flags
="-m 10" # Used if dumpdev is enabled above, and present.
608 # By default, only the 10 most recent kernel dumps
610 crashinfo_enable
="YES" # Automatically generate crash dump summary.
611 crashinfo_program
="/usr/sbin/crashinfo" # Script to generate crash dump summary.
612 quota_enable
="NO" # turn on quotas on startup (or NO).
613 check_quotas
="YES" # Check quotas on startup (or NO).
614 quotaon_flags
="-a" # Turn quotas on for all file systems (if enabled)
615 quotaoff_flags
="-a" # Turn quotas off for all file systems at shutdown
616 quotacheck_flags
="-a" # Check all file system quotas (if enabled)
617 accounting_enable
="NO" # Turn on process accounting (or NO).
618 ibcs2_enable
="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
619 ibcs2_loaders
="coff" # List of additional Ibcs2 loaders (or NO).
620 firstboot_sentinel
="/firstboot" # Scripts with "firstboot" keyword are run if
621 # this file exists. Should be on a R/W filesystem so
622 # the file can be deleted after the boot completes.
624 # Emulation/compatibility services provided by /etc/rc.d/abi
625 sysvipc_enable
="NO" # Load System V IPC primitives at startup (or NO).
626 linux_enable
="NO" # Linux binary compatibility loaded at startup (or NO).
627 svr4_enable
="NO" # SysVR4 emulation loaded at startup (or NO).
628 clear_tmp_enable
="NO" # Clear /tmp at startup.
629 clear_tmp_X
="YES" # Clear and recreate X11-related directories in /tmp
630 ldconfig_insecure
="NO" # Set to YES to disable ldconfig security checks
631 ldconfig_paths
="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
632 # shared library search paths
633 ldconfig32_paths
="/usr/lib32 /usr/lib32/compat"
634 # 32-bit compatibility shared library search paths
635 ldconfigsoft_paths
="/usr/libsoft /usr/libsoft/compat /usr/local/libsoft"
636 # soft float compatibility shared library search paths
637 # Note: temporarily with extra stuff for transition
638 ldconfig_paths_aout
="/usr/lib/compat/aout /usr/local/lib/aout"
639 # a.out shared library search paths
640 ldconfig_local_dirs
="/usr/local/libdata/ldconfig"
641 # Local directories with ldconfig configuration files.
642 ldconfig_local32_dirs
="/usr/local/libdata/ldconfig32"
643 # Local directories with 32-bit compatibility ldconfig
644 # configuration files.
645 ldconfig_localsoft_dirs
="/usr/local/libdata/ldconfigsoft"
646 # Local directories with soft float compatibility ldconfig
647 # configuration files.
648 kern_securelevel_enable
="NO" # kernel security level (see security(7))
649 kern_securelevel
="-1" # range: -1..3 ; `-1' is the most insecure
650 # Note that setting securelevel to 0 will result
651 # in the system booting with securelevel set to 1, as
652 # init(8) will raise the level when rc(8) completes.
653 update_motd
="YES" # update version info in /etc/motd (or NO)
654 entropy_boot_file
="/boot/entropy" # Set to NO to disable very early
655 # (used at early boot time) entropy caching through reboots.
656 entropy_file
="/entropy" # Set to NO to disable late (used when going multi-user)
657 # entropy through reboots.
658 # /var/db/entropy-file is preferred if / is not avail.
659 entropy_dir
="/var/db/entropy" # Set to NO to disable caching entropy via cron.
660 entropy_save_sz
="4096" # Size of the entropy cache files.
661 entropy_save_num
="8" # Number of entropy cache files to save.
662 harvest_mask
="511" # Entropy device harvests all but the very invasive sources.
663 # (See 'sysctl kern.random.harvest' and random(4))
664 dmesg_enable
="YES" # Save dmesg(8) to /var/run/dmesg.boot
665 watchdogd_enable
="NO" # Start the software watchdog daemon
666 watchdogd_flags
="" # Flags to watchdogd (if enabled)
667 devfs_rulesets
="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
669 devfs_system_ruleset
="" # The name (NOT number) of a ruleset to apply to /dev
670 devfs_set_rulesets
="" # A list of /mount/dev=ruleset_name settings to
671 # apply (must be mounted already, i.e. fstab(5))
672 devfs_load_rulesets
="YES" # Enable to always load the default rulesets
673 performance_cx_lowest
="C2" # Online CPU idle state
674 performance_cpu_freq
="NONE" # Online CPU frequency
675 economy_cx_lowest
="Cmax" # Offline CPU idle state
676 economy_cpu_freq
="NONE" # Offline CPU frequency
677 virecover_enable
="YES" # Perform housekeeping for the vi(1) editor
678 ugidfw_enable
="NO" # Load mac_bsdextended(4) rules on boot
679 bsdextended_script
="/etc/rc.bsdextended" # Default mac_bsdextended(4)
681 newsyslog_enable
="YES" # Run newsyslog at startup.
682 newsyslog_flags
="-CN" # Newsyslog flags to create marked files
683 mixer_enable
="YES" # Run the sound mixer.
684 opensm_enable
="NO" # Opensm(8) for infiniband devices defaults to off
686 # rctl(8) requires kernel options RACCT and RCTL
687 rctl_enable
="YES" # Load rctl(8) rules on boot
688 rctl_rules
="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5).
690 iovctl_files
="" # Config files for iovctl(8)
692 ##############################################################
693 ### Jail Configuration (see rc.conf(5) manual page) ##########
694 ##############################################################
695 jail_enable
="NO" # Set to NO to disable starting of any jails
696 jail_parallel_start
="NO" # Start jails in the background
697 jail_list
="" # Space separated list of names of jails
698 jail_reverse_stop
="NO" # Stop jails in reverse order
700 ##############################################################
701 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
702 ### scripts to source rc_conf_files overrides safely. ##
703 ##############################################################
705 if [ -z "${source_rc_confs_defined}" ]; then
706 source_rc_confs_defined
=yes
708 local i sourced_files
709 for i
in ${rc_conf_files}; do
710 case ${sourced_files} in
714 sourced_files
="${sourced_files}:$i:"
721 # Re-do process to pick up [possibly] redefined $rc_conf_files
722 for i
in ${rc_conf_files}; do
723 case ${sourced_files} in
727 sourced_files
="${sourced_files}:$i:"