ath5k: beacon interval is in TU
[firewire-audio.git] / drivers / net / wireless / ath5k / ath5k.h
blobc79066b38d3b4797e79ff59aee3752b3824d84d0
1 /*
2 * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
3 * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
5 * Permission to use, copy, modify, and distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 #ifndef _ATH5K_H
19 #define _ATH5K_H
21 /* Set this to 1 to disable regulatory domain restrictions for channel tests.
22 * WARNING: This is for debuging only and has side effects (eg. scan takes too
23 * long and results timeouts). It's also illegal to tune to some of the
24 * supported frequencies in some countries, so use this at your own risk,
25 * you've been warned. */
26 #define CHAN_DEBUG 0
28 #include <linux/io.h>
29 #include <linux/types.h>
30 #include <net/mac80211.h>
32 #include "hw.h"
33 #include "regdom.h"
35 /* PCI IDs */
36 #define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */
37 #define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */
38 #define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */
39 #define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */
40 #define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */
41 #define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */
42 #define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */
43 #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */
44 #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */
45 #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */
46 #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */
47 #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */
48 #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */
49 #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */
50 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
51 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
52 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */
53 #define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */
54 #define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */
55 #define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */
56 #define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */
57 #define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */
58 #define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */
59 #define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */
60 #define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */
61 #define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */
62 #define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */
63 #define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */
65 /****************************\
66 GENERIC DRIVER DEFINITIONS
67 \****************************/
69 #define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__)
71 #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
72 printk(_level "ath5k %s: " _fmt, \
73 ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
74 ##__VA_ARGS__)
76 #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
77 if (net_ratelimit()) \
78 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
79 } while (0)
81 #define ATH5K_INFO(_sc, _fmt, ...) \
82 ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
84 #define ATH5K_WARN(_sc, _fmt, ...) \
85 ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
87 #define ATH5K_ERR(_sc, _fmt, ...) \
88 ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
91 * Some tuneable values (these should be changeable by the user)
93 #define AR5K_TUNE_DMA_BEACON_RESP 2
94 #define AR5K_TUNE_SW_BEACON_RESP 10
95 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0
96 #define AR5K_TUNE_RADAR_ALERT false
97 #define AR5K_TUNE_MIN_TX_FIFO_THRES 1
98 #define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1)
99 #define AR5K_TUNE_REGISTER_TIMEOUT 20000
100 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to
101 * be the max value. */
102 #define AR5K_TUNE_RSSI_THRES 129
103 /* This must be set when setting the RSSI threshold otherwise it can
104 * prevent a reset. If AR5K_RSSI_THR is read after writing to it
105 * the BMISS_THRES will be seen as 0, seems harware doesn't keep
106 * track of it. Max value depends on harware. For AR5210 this is just 7.
107 * For AR5211+ this seems to be up to 255. */
108 #define AR5K_TUNE_BMISS_THRES 7
109 #define AR5K_TUNE_REGISTER_DWELL_TIME 20000
110 #define AR5K_TUNE_BEACON_INTERVAL 100
111 #define AR5K_TUNE_AIFS 2
112 #define AR5K_TUNE_AIFS_11B 2
113 #define AR5K_TUNE_AIFS_XR 0
114 #define AR5K_TUNE_CWMIN 15
115 #define AR5K_TUNE_CWMIN_11B 31
116 #define AR5K_TUNE_CWMIN_XR 3
117 #define AR5K_TUNE_CWMAX 1023
118 #define AR5K_TUNE_CWMAX_11B 1023
119 #define AR5K_TUNE_CWMAX_XR 7
120 #define AR5K_TUNE_NOISE_FLOOR -72
121 #define AR5K_TUNE_MAX_TXPOWER 60
122 #define AR5K_TUNE_DEFAULT_TXPOWER 30
123 #define AR5K_TUNE_TPC_TXPOWER true
124 #define AR5K_TUNE_ANT_DIVERSITY true
125 #define AR5K_TUNE_HWTXTRIES 4
127 /* token to use for aifs, cwmin, cwmax in MadWiFi */
128 #define AR5K_TXQ_USEDEFAULT ((u32) -1)
130 /* GENERIC CHIPSET DEFINITIONS */
132 /* MAC Chips */
133 enum ath5k_version {
134 AR5K_AR5210 = 0,
135 AR5K_AR5211 = 1,
136 AR5K_AR5212 = 2,
139 /* PHY Chips */
140 enum ath5k_radio {
141 AR5K_RF5110 = 0,
142 AR5K_RF5111 = 1,
143 AR5K_RF5112 = 2,
144 AR5K_RF5413 = 3,
148 * Common silicon revision/version values
151 enum ath5k_srev_type {
152 AR5K_VERSION_VER,
153 AR5K_VERSION_RAD,
156 struct ath5k_srev_name {
157 const char *sr_name;
158 enum ath5k_srev_type sr_type;
159 u_int sr_val;
162 #define AR5K_SREV_UNKNOWN 0xffff
164 #define AR5K_SREV_VER_AR5210 0x00
165 #define AR5K_SREV_VER_AR5311 0x10
166 #define AR5K_SREV_VER_AR5311A 0x20
167 #define AR5K_SREV_VER_AR5311B 0x30
168 #define AR5K_SREV_VER_AR5211 0x40
169 #define AR5K_SREV_VER_AR5212 0x50
170 #define AR5K_SREV_VER_AR5213 0x55
171 #define AR5K_SREV_VER_AR5213A 0x59
172 #define AR5K_SREV_VER_AR2424 0xa0
173 #define AR5K_SREV_VER_AR5424 0xa3
174 #define AR5K_SREV_VER_AR5413 0xa4
175 #define AR5K_SREV_VER_AR5414 0xa5
176 #define AR5K_SREV_VER_AR5416 0xc0 /* ? */
177 #define AR5K_SREV_VER_AR5418 0xca
179 #define AR5K_SREV_RAD_5110 0x00
180 #define AR5K_SREV_RAD_5111 0x10
181 #define AR5K_SREV_RAD_5111A 0x15
182 #define AR5K_SREV_RAD_2111 0x20
183 #define AR5K_SREV_RAD_5112 0x30
184 #define AR5K_SREV_RAD_5112A 0x35
185 #define AR5K_SREV_RAD_2112 0x40
186 #define AR5K_SREV_RAD_2112A 0x45
187 #define AR5K_SREV_RAD_SC1 0x63 /* Found on 5413/5414 */
188 #define AR5K_SREV_RAD_SC2 0xa2 /* Found on 2424/5424 */
189 #define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */
191 /* IEEE defs */
193 #define IEEE80211_MAX_LEN 2500
195 /* TODO add support to mac80211 for vendor-specific rates and modes */
198 * Some of this information is based on Documentation from:
200 * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
202 * Modulation for Atheros' eXtended Range - range enhancing extension that is
203 * supposed to double the distance an Atheros client device can keep a
204 * connection with an Atheros access point. This is achieved by increasing
205 * the receiver sensitivity up to, -105dBm, which is about 20dB above what
206 * the 802.11 specifications demand. In addition, new (proprietary) data rates
207 * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
209 * Please note that can you either use XR or TURBO but you cannot use both,
210 * they are exclusive.
213 #define MODULATION_XR 0x00000200
215 * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
216 * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
217 * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
218 * channels. To use this feature your Access Point must also suport it.
219 * There is also a distinction between "static" and "dynamic" turbo modes:
221 * - Static: is the dumb version: devices set to this mode stick to it until
222 * the mode is turned off.
223 * - Dynamic: is the intelligent version, the network decides itself if it
224 * is ok to use turbo. As soon as traffic is detected on adjacent channels
225 * (which would get used in turbo mode), or when a non-turbo station joins
226 * the network, turbo mode won't be used until the situation changes again.
227 * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
228 * monitors the used radio band in order to decide whether turbo mode may
229 * be used or not.
231 * This article claims Super G sticks to bonding of channels 5 and 6 for
232 * USA:
234 * http://www.pcworld.com/article/id,113428-page,1/article.html
236 * The channel bonding seems to be driver specific though. In addition to
237 * deciding what channels will be used, these "Turbo" modes are accomplished
238 * by also enabling the following features:
240 * - Bursting: allows multiple frames to be sent at once, rather than pausing
241 * after each frame. Bursting is a standards-compliant feature that can be
242 * used with any Access Point.
243 * - Fast frames: increases the amount of information that can be sent per
244 * frame, also resulting in a reduction of transmission overhead. It is a
245 * proprietary feature that needs to be supported by the Access Point.
246 * - Compression: data frames are compressed in real time using a Lempel Ziv
247 * algorithm. This is done transparently. Once this feature is enabled,
248 * compression and decompression takes place inside the chipset, without
249 * putting additional load on the host CPU.
252 #define MODULATION_TURBO 0x00000080
254 enum ath5k_vendor_mode {
255 MODE_ATHEROS_TURBO = NUM_IEEE80211_MODES+1,
256 MODE_ATHEROS_TURBOG
259 /* Number of supported mac80211 enum ieee80211_phymode modes by this driver */
260 #define NUM_DRIVER_MODES 3
262 /* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
263 #define AR5K_SET_SHORT_PREAMBLE 0x04
265 #define HAS_SHPREAMBLE(_ix) (rt->rates[_ix].modulation == IEEE80211_RATE_CCK_2)
266 #define SHPREAMBLE_FLAG(_ix) (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0)
268 /****************\
269 TX DEFINITIONS
270 \****************/
273 * Tx Descriptor
275 struct ath5k_tx_status {
276 u16 ts_seqnum;
277 u16 ts_tstamp;
278 u8 ts_status;
279 u8 ts_rate;
280 s8 ts_rssi;
281 u8 ts_shortretry;
282 u8 ts_longretry;
283 u8 ts_virtcol;
284 u8 ts_antenna;
287 #define AR5K_TXSTAT_ALTRATE 0x80
288 #define AR5K_TXERR_XRETRY 0x01
289 #define AR5K_TXERR_FILT 0x02
290 #define AR5K_TXERR_FIFO 0x04
293 * enum ath5k_tx_queue - Queue types used to classify tx queues.
294 * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
295 * @AR5K_TX_QUEUE_DATA: A normal data queue
296 * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
297 * @AR5K_TX_QUEUE_BEACON: The beacon queue
298 * @AR5K_TX_QUEUE_CAB: The after-beacon queue
299 * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
301 enum ath5k_tx_queue {
302 AR5K_TX_QUEUE_INACTIVE = 0,
303 AR5K_TX_QUEUE_DATA,
304 AR5K_TX_QUEUE_XR_DATA,
305 AR5K_TX_QUEUE_BEACON,
306 AR5K_TX_QUEUE_CAB,
307 AR5K_TX_QUEUE_UAPSD,
310 #define AR5K_NUM_TX_QUEUES 10
311 #define AR5K_NUM_TX_QUEUES_NOQCU 2
314 * Queue syb-types to classify normal data queues.
315 * These are the 4 Access Categories as defined in
316 * WME spec. 0 is the lowest priority and 4 is the
317 * highest. Normal data that hasn't been classified
318 * goes to the Best Effort AC.
320 enum ath5k_tx_queue_subtype {
321 AR5K_WME_AC_BK = 0, /*Background traffic*/
322 AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/
323 AR5K_WME_AC_VI, /*Video traffic*/
324 AR5K_WME_AC_VO, /*Voice traffic*/
328 * Queue ID numbers as returned by the hw functions, each number
329 * represents a hw queue. If hw does not support hw queues
330 * (eg 5210) all data goes in one queue. These match
331 * d80211 definitions (net80211/MadWiFi don't use them).
333 enum ath5k_tx_queue_id {
334 AR5K_TX_QUEUE_ID_NOQCU_DATA = 0,
335 AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1,
336 AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/
337 AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/
338 AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
339 AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
340 AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/
341 AR5K_TX_QUEUE_ID_UAPSD = 8,
342 AR5K_TX_QUEUE_ID_XR_DATA = 9,
347 * Flags to set hw queue's parameters...
349 #define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */
350 #define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */
351 #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */
352 #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */
353 #define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */
354 #define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0020 /* Disable random post-backoff */
355 #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040 /* Enable ready time expiry policy (?)*/
356 #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080 /* Enable backoff while bursting */
357 #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x0100 /* Disable backoff while bursting */
358 #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x0200 /* Enable hw compression -not implemented-*/
361 * A struct to hold tx queue's parameters
363 struct ath5k_txq_info {
364 enum ath5k_tx_queue tqi_type;
365 enum ath5k_tx_queue_subtype tqi_subtype;
366 u16 tqi_flags; /* Tx queue flags (see above) */
367 u32 tqi_aifs; /* Arbitrated Interframe Space */
368 s32 tqi_cw_min; /* Minimum Contention Window */
369 s32 tqi_cw_max; /* Maximum Contention Window */
370 u32 tqi_cbr_period; /* Constant bit rate period */
371 u32 tqi_cbr_overflow_limit;
372 u32 tqi_burst_time;
373 u32 tqi_ready_time; /* Not used */
377 * Transmit packet types.
378 * These are not fully used inside OpenHAL yet
380 enum ath5k_pkt_type {
381 AR5K_PKT_TYPE_NORMAL = 0,
382 AR5K_PKT_TYPE_ATIM = 1,
383 AR5K_PKT_TYPE_PSPOLL = 2,
384 AR5K_PKT_TYPE_BEACON = 3,
385 AR5K_PKT_TYPE_PROBE_RESP = 4,
386 AR5K_PKT_TYPE_PIFS = 5,
390 * TX power and TPC settings
392 #define AR5K_TXPOWER_OFDM(_r, _v) ( \
393 ((0 & 1) << ((_v) + 6)) | \
394 (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v)) \
397 #define AR5K_TXPOWER_CCK(_r, _v) ( \
398 (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \
402 * DMA size definitions (2^n+2)
404 enum ath5k_dmasize {
405 AR5K_DMASIZE_4B = 0,
406 AR5K_DMASIZE_8B,
407 AR5K_DMASIZE_16B,
408 AR5K_DMASIZE_32B,
409 AR5K_DMASIZE_64B,
410 AR5K_DMASIZE_128B,
411 AR5K_DMASIZE_256B,
412 AR5K_DMASIZE_512B
416 /****************\
417 RX DEFINITIONS
418 \****************/
421 * Rx Descriptor
423 struct ath5k_rx_status {
424 u16 rs_datalen;
425 u16 rs_tstamp;
426 u8 rs_status;
427 u8 rs_phyerr;
428 s8 rs_rssi;
429 u8 rs_keyix;
430 u8 rs_rate;
431 u8 rs_antenna;
432 u8 rs_more;
435 #define AR5K_RXERR_CRC 0x01
436 #define AR5K_RXERR_PHY 0x02
437 #define AR5K_RXERR_FIFO 0x04
438 #define AR5K_RXERR_DECRYPT 0x08
439 #define AR5K_RXERR_MIC 0x10
440 #define AR5K_RXKEYIX_INVALID ((u8) - 1)
441 #define AR5K_TXKEYIX_INVALID ((u32) - 1)
443 struct ath5k_mib_stats {
444 u32 ackrcv_bad;
445 u32 rts_bad;
446 u32 rts_good;
447 u32 fcs_bad;
448 u32 beacons;
454 /**************************\
455 BEACON TIMERS DEFINITIONS
456 \**************************/
458 #define AR5K_BEACON_PERIOD 0x0000ffff
459 #define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/
460 #define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/
462 #if 0
464 * struct ath5k_beacon_state - Per-station beacon timer state.
465 * @bs_interval: in TU's, can also include the above flags
466 * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
467 * Point Coordination Function capable AP
469 struct ath5k_beacon_state {
470 u32 bs_next_beacon;
471 u32 bs_next_dtim;
472 u32 bs_interval;
473 u8 bs_dtim_period;
474 u8 bs_cfp_period;
475 u16 bs_cfp_max_duration;
476 u16 bs_cfp_du_remain;
477 u16 bs_tim_offset;
478 u16 bs_sleep_duration;
479 u16 bs_bmiss_threshold;
480 u32 bs_cfp_next;
482 #endif
486 * TSF to TU conversion:
488 * TSF is a 64bit value in usec (microseconds).
489 * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
490 * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
492 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
496 /********************\
497 COMMON DEFINITIONS
498 \********************/
501 * Atheros descriptor
503 struct ath5k_desc {
504 u32 ds_link;
505 u32 ds_data;
506 u32 ds_ctl0;
507 u32 ds_ctl1;
508 u32 ds_hw[4];
510 union {
511 struct ath5k_rx_status rx;
512 struct ath5k_tx_status tx;
513 } ds_us;
515 #define ds_rxstat ds_us.rx
516 #define ds_txstat ds_us.tx
518 } __packed;
520 #define AR5K_RXDESC_INTREQ 0x0020
522 #define AR5K_TXDESC_CLRDMASK 0x0001
523 #define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/
524 #define AR5K_TXDESC_RTSENA 0x0004
525 #define AR5K_TXDESC_CTSENA 0x0008
526 #define AR5K_TXDESC_INTREQ 0x0010
527 #define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/
529 #define AR5K_SLOT_TIME_9 396
530 #define AR5K_SLOT_TIME_20 880
531 #define AR5K_SLOT_TIME_MAX 0xffff
533 /* channel_flags */
534 #define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */
535 #define CHANNEL_TURBO 0x0010 /* Turbo Channel */
536 #define CHANNEL_CCK 0x0020 /* CCK channel */
537 #define CHANNEL_OFDM 0x0040 /* OFDM channel */
538 #define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */
539 #define CHANNEL_5GHZ 0x0100 /* 5GHz channel */
540 #define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */
541 #define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */
542 #define CHANNEL_XR 0x0800 /* XR channel */
544 #define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM)
545 #define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK)
546 #define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM)
547 #define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
548 #define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
549 #define CHANNEL_108A CHANNEL_T
550 #define CHANNEL_108G CHANNEL_TG
551 #define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
553 #define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
554 CHANNEL_TURBO)
556 #define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO)
557 #define CHANNEL_MODES CHANNEL_ALL
560 * Used internaly in OpenHAL (ar5211.c/ar5212.c
561 * for reset_tx_queue). Also see struct struct ieee80211_channel.
563 #define IS_CHAN_XR(_c) ((_c.val & CHANNEL_XR) != 0)
564 #define IS_CHAN_B(_c) ((_c.val & CHANNEL_B) != 0)
567 * The following structure will be used to map 2GHz channels to
568 * 5GHz Atheros channels.
570 struct ath5k_athchan_2ghz {
571 u32 a2_flags;
572 u16 a2_athchan;
576 * Rate definitions
577 * TODO: Clean them up or move them on mac80211 -most of these infos are
578 * used by the rate control algorytm on MadWiFi.
581 /* Max number of rates on the rate table and what it seems
582 * Atheros hardware supports */
583 #define AR5K_MAX_RATES 32
586 * struct ath5k_rate - rate structure
587 * @valid: is this a valid rate for the current mode
588 * @modulation: respective mac80211 modulation
589 * @rate_kbps: rate in kbit/s
590 * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on
591 * &struct ath5k_rx_status.rs_rate and on TX on
592 * &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports
593 * up to 32 rates, indexed by 1-32. This means we really only need
594 * 6 bits for the rate_code.
595 * @dot11_rate: respective IEEE-802.11 rate value
596 * @control_rate: index of rate assumed to be used to send control frames.
597 * This can be used to set override the value on the rate duration
598 * registers. This is only useful if we can override in the harware at
599 * what rate we want to send control frames at. Note that IEEE-802.11
600 * Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we
601 * should send ACK/CTS, if we change this value we can be breaking
602 * the spec.
604 * This structure is used to get the RX rate or set the TX rate on the
605 * hardware descriptors. It is also used for internal modulation control
606 * and settings.
608 * On RX after the &struct ath5k_desc is parsed by the appropriate
609 * ah_proc_rx_desc() the respective hardware rate value is set in
610 * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in
611 * &struct ath5k_tx_status.ts_rate which is later used to setup the
612 * &struct ath5k_desc correctly. This is the hardware rate map we are
613 * aware of:
615 * rate_code 1 2 3 4 5 6 7 8
616 * rate_kbps 3000 1000 ? ? ? 2000 500 48000
618 * rate_code 9 10 11 12 13 14 15 16
619 * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ?
621 * rate_code 17 18 19 20 21 22 23 24
622 * rate_kbps ? ? ? ? ? ? ? 11000
624 * rate_code 25 26 27 28 29 30 31 32
625 * rate_kbps 5500 2000 1000 ? ? ? ? ?
628 struct ath5k_rate {
629 u8 valid;
630 u32 modulation;
631 u16 rate_kbps;
632 u8 rate_code;
633 u8 dot11_rate;
634 u8 control_rate;
637 /* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */
638 struct ath5k_rate_table {
639 u16 rate_count;
640 u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */
641 struct ath5k_rate rates[AR5K_MAX_RATES];
645 * Rate tables...
647 #define AR5K_RATES_11A { 8, { \
648 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \
649 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \
650 255, 255, 255, 255, 255, 255, 255, 255 }, { \
651 { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 0 }, \
652 { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 0 }, \
653 { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 2 }, \
654 { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 2 }, \
655 { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 4 }, \
656 { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 4 }, \
657 { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 4 }, \
658 { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 4 } } \
661 #define AR5K_RATES_11B { 4, { \
662 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
663 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \
664 3, 2, 1, 0, 255, 255, 255, 255 }, { \
665 { 1, IEEE80211_RATE_CCK, 1000, 27, 130, 0 }, \
666 { 1, IEEE80211_RATE_CCK_2, 2000, 26, 132, 1 }, \
667 { 1, IEEE80211_RATE_CCK_2, 5500, 25, 139, 1 }, \
668 { 1, IEEE80211_RATE_CCK_2, 11000, 24, 150, 1 } } \
671 #define AR5K_RATES_11G { 12, { \
672 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \
673 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \
674 3, 2, 1, 0, 255, 255, 255, 255 }, { \
675 { 1, IEEE80211_RATE_CCK, 1000, 27, 2, 0 }, \
676 { 1, IEEE80211_RATE_CCK_2, 2000, 26, 4, 1 }, \
677 { 1, IEEE80211_RATE_CCK_2, 5500, 25, 11, 1 }, \
678 { 1, IEEE80211_RATE_CCK_2, 11000, 24, 22, 1 }, \
679 { 0, IEEE80211_RATE_OFDM, 6000, 11, 12, 4 }, \
680 { 0, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 }, \
681 { 1, IEEE80211_RATE_OFDM, 12000, 10, 24, 6 }, \
682 { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 }, \
683 { 1, IEEE80211_RATE_OFDM, 24000, 9, 48, 8 }, \
684 { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 }, \
685 { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 }, \
686 { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \
689 #define AR5K_RATES_TURBO { 8, { \
690 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \
691 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \
692 255, 255, 255, 255, 255, 255, 255, 255 }, { \
693 { 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \
694 { 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \
695 { 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \
696 { 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \
697 { 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \
698 { 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \
699 { 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \
700 { 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \
703 #define AR5K_RATES_XR { 12, { \
704 255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \
705 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \
706 255, 255, 255, 255, 255, 255, 255, 255 }, { \
707 { 1, MODULATION_XR, 500, 7, 129, 0 }, \
708 { 1, MODULATION_XR, 1000, 2, 139, 1 }, \
709 { 1, MODULATION_XR, 2000, 6, 150, 2 }, \
710 { 1, MODULATION_XR, 3000, 1, 150, 3 }, \
711 { 1, IEEE80211_RATE_OFDM, 6000, 11, 140, 4 }, \
712 { 1, IEEE80211_RATE_OFDM, 9000, 15, 18, 4 }, \
713 { 1, IEEE80211_RATE_OFDM, 12000, 10, 152, 6 }, \
714 { 1, IEEE80211_RATE_OFDM, 18000, 14, 36, 6 }, \
715 { 1, IEEE80211_RATE_OFDM, 24000, 9, 176, 8 }, \
716 { 1, IEEE80211_RATE_OFDM, 36000, 13, 72, 8 }, \
717 { 1, IEEE80211_RATE_OFDM, 48000, 8, 96, 8 }, \
718 { 1, IEEE80211_RATE_OFDM, 54000, 12, 108, 8 } } \
722 * Crypto definitions
725 #define AR5K_KEYCACHE_SIZE 8
727 /***********************\
728 HW RELATED DEFINITIONS
729 \***********************/
732 * Misc definitions
734 #define AR5K_RSSI_EP_MULTIPLIER (1<<7)
736 #define AR5K_ASSERT_ENTRY(_e, _s) do { \
737 if (_e >= _s) \
738 return (false); \
739 } while (0)
742 enum ath5k_ant_setting {
743 AR5K_ANT_VARIABLE = 0, /* variable by programming */
744 AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */
745 AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */
746 AR5K_ANT_MAX = 3,
750 * Hardware interrupt abstraction
754 * enum ath5k_int - Hardware interrupt masks helpers
756 * @AR5K_INT_RX: mask to identify received frame interrupts, of type
757 * AR5K_ISR_RXOK or AR5K_ISR_RXERR
758 * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
759 * @AR5K_INT_RXNOFRM: No frame received (?)
760 * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
761 * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
762 * LinkPtr is NULL. For more details, refer to:
763 * http://www.freepatentsonline.com/20030225739.html
764 * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
765 * Note that Rx overrun is not always fatal, on some chips we can continue
766 * operation without reseting the card, that's why int_fatal is not
767 * common for all chips.
768 * @AR5K_INT_TX: mask to identify received frame interrupts, of type
769 * AR5K_ISR_TXOK or AR5K_ISR_TXERR
770 * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
771 * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
772 * We currently do increments on interrupt by
773 * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
774 * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
775 * checked. We should do this with ath5k_hw_update_mib_counters() but
776 * it seems we should also then do some noise immunity work.
777 * @AR5K_INT_RXPHY: RX PHY Error
778 * @AR5K_INT_RXKCM: ??
779 * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
780 * beacon that must be handled in software. The alternative is if you
781 * have VEOL support, in that case you let the hardware deal with things.
782 * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
783 * beacons from the AP have associated with, we should probably try to
784 * reassociate. When in IBSS mode this might mean we have not received
785 * any beacons from any local stations. Note that every station in an
786 * IBSS schedules to send beacons at the Target Beacon Transmission Time
787 * (TBTT) with a random backoff.
788 * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
789 * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
790 * until properly handled
791 * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
792 * errors. These types of errors we can enable seem to be of type
793 * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
794 * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER
795 * @AR5K_INT_NOCARD: signals the card has been removed
796 * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
797 * bit value
799 * These are mapped to take advantage of some common bits
800 * between the MACs, to be able to set intr properties
801 * easier. Some of them are not used yet inside hw.c. Most map
802 * to the respective hw interrupt value as they are common amogst different
803 * MACs.
805 enum ath5k_int {
806 AR5K_INT_RX = 0x00000001, /* Not common */
807 AR5K_INT_RXDESC = 0x00000002,
808 AR5K_INT_RXNOFRM = 0x00000008,
809 AR5K_INT_RXEOL = 0x00000010,
810 AR5K_INT_RXORN = 0x00000020,
811 AR5K_INT_TX = 0x00000040, /* Not common */
812 AR5K_INT_TXDESC = 0x00000080,
813 AR5K_INT_TXURN = 0x00000800,
814 AR5K_INT_MIB = 0x00001000,
815 AR5K_INT_RXPHY = 0x00004000,
816 AR5K_INT_RXKCM = 0x00008000,
817 AR5K_INT_SWBA = 0x00010000,
818 AR5K_INT_BMISS = 0x00040000,
819 AR5K_INT_BNR = 0x00100000, /* Not common */
820 AR5K_INT_GPIO = 0x01000000,
821 AR5K_INT_FATAL = 0x40000000, /* Not common */
822 AR5K_INT_GLOBAL = 0x80000000,
824 AR5K_INT_COMMON = AR5K_INT_RXNOFRM
825 | AR5K_INT_RXDESC
826 | AR5K_INT_RXEOL
827 | AR5K_INT_RXORN
828 | AR5K_INT_TXURN
829 | AR5K_INT_TXDESC
830 | AR5K_INT_MIB
831 | AR5K_INT_RXPHY
832 | AR5K_INT_RXKCM
833 | AR5K_INT_SWBA
834 | AR5K_INT_BMISS
835 | AR5K_INT_GPIO,
836 AR5K_INT_NOCARD = 0xffffffff
840 * Power management
842 enum ath5k_power_mode {
843 AR5K_PM_UNDEFINED = 0,
844 AR5K_PM_AUTO,
845 AR5K_PM_AWAKE,
846 AR5K_PM_FULL_SLEEP,
847 AR5K_PM_NETWORK_SLEEP,
851 * These match net80211 definitions (not used in
852 * d80211).
854 #define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/
855 #define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/
856 #define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/
857 #define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/
858 #define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/
860 /* GPIO-controlled software LED */
861 #define AR5K_SOFTLED_PIN 0
862 #define AR5K_SOFTLED_ON 0
863 #define AR5K_SOFTLED_OFF 1
866 * Chipset capabilities -see ath5k_hw_get_capability-
867 * get_capability function is not yet fully implemented
868 * in OpenHAL so most of these don't work yet...
870 enum ath5k_capability_type {
871 AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */
872 AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */
873 AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */
874 AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */
875 AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */
876 AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */
877 AR5K_CAP_VEOL = 7, /* Supports virtual EOL */
878 AR5K_CAP_COMPRESSION = 8, /* Supports compression */
879 AR5K_CAP_BURST = 9, /* Supports packet bursting */
880 AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */
881 AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */
882 AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */
883 AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */
884 AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */
885 AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */
886 AR5K_CAP_XR = 16, /* Supports XR mode */
887 AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */
888 AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */
889 AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */
890 AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */
893 struct ath5k_capabilities {
895 * Supported PHY modes
896 * (ie. CHANNEL_A, CHANNEL_B, ...)
898 DECLARE_BITMAP(cap_mode, NUM_DRIVER_MODES);
901 * Frequency range (without regulation restrictions)
903 struct {
904 u16 range_2ghz_min;
905 u16 range_2ghz_max;
906 u16 range_5ghz_min;
907 u16 range_5ghz_max;
908 } cap_range;
911 * Active regulation domain settings
913 struct {
914 enum ath5k_regdom reg_current;
915 enum ath5k_regdom reg_hw;
916 } cap_regdomain;
919 * Values stored in the EEPROM (some of them...)
921 struct ath5k_eeprom_info cap_eeprom;
924 * Queue information
926 struct {
927 u8 q_tx_num;
928 } cap_queues;
932 /***************************************\
933 HARDWARE ABSTRACTION LAYER STRUCTURE
934 \***************************************/
937 * Misc defines
940 #define AR5K_MAX_GPIO 10
941 #define AR5K_MAX_RF_BANKS 8
943 struct ath5k_hw {
944 u32 ah_magic;
946 struct ath5k_softc *ah_sc;
947 void __iomem *ah_iobase;
949 enum ath5k_int ah_imr;
951 enum ieee80211_if_types ah_op_mode;
952 enum ath5k_power_mode ah_power_mode;
953 struct ieee80211_channel ah_current_channel;
954 bool ah_turbo;
955 bool ah_calibration;
956 bool ah_running;
957 bool ah_single_chip;
958 enum ath5k_rfgain ah_rf_gain;
960 u32 ah_mac_srev;
961 u16 ah_mac_version;
962 u16 ah_mac_revision;
963 u16 ah_phy_revision;
964 u16 ah_radio_5ghz_revision;
965 u16 ah_radio_2ghz_revision;
967 enum ath5k_version ah_version;
968 enum ath5k_radio ah_radio;
969 u32 ah_phy;
971 bool ah_5ghz;
972 bool ah_2ghz;
974 #define ah_regdomain ah_capabilities.cap_regdomain.reg_current
975 #define ah_regdomain_hw ah_capabilities.cap_regdomain.reg_hw
976 #define ah_modes ah_capabilities.cap_mode
977 #define ah_ee_version ah_capabilities.cap_eeprom.ee_version
979 u32 ah_atim_window;
980 u32 ah_aifs;
981 u32 ah_cw_min;
982 u32 ah_cw_max;
983 bool ah_software_retry;
984 u32 ah_limit_tx_retries;
986 u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
987 bool ah_ant_diversity;
989 u8 ah_sta_id[ETH_ALEN];
991 /* Current BSSID we are trying to assoc to / creating.
992 * This is passed by mac80211 on config_interface() and cached here for
993 * use in resets */
994 u8 ah_bssid[ETH_ALEN];
996 u32 ah_gpio[AR5K_MAX_GPIO];
997 int ah_gpio_npins;
999 struct ath5k_capabilities ah_capabilities;
1001 struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES];
1002 u32 ah_txq_status;
1003 u32 ah_txq_imr_txok;
1004 u32 ah_txq_imr_txerr;
1005 u32 ah_txq_imr_txurn;
1006 u32 ah_txq_imr_txdesc;
1007 u32 ah_txq_imr_txeol;
1008 u32 *ah_rf_banks;
1009 size_t ah_rf_banks_size;
1010 struct ath5k_gain ah_gain;
1011 u32 ah_offset[AR5K_MAX_RF_BANKS];
1013 struct {
1014 u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
1015 u16 txp_rates[AR5K_MAX_RATES];
1016 s16 txp_min;
1017 s16 txp_max;
1018 bool txp_tpc;
1019 s16 txp_ofdm;
1020 } ah_txpower;
1022 struct {
1023 bool r_enabled;
1024 int r_last_alert;
1025 struct ieee80211_channel r_last_channel;
1026 } ah_radar;
1028 /* noise floor from last periodic calibration */
1029 s32 ah_noise_floor;
1032 * Function pointers
1034 int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1035 unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
1036 unsigned int, unsigned int, unsigned int, unsigned int,
1037 unsigned int, unsigned int, unsigned int);
1038 bool (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1039 unsigned int, unsigned int, unsigned int, unsigned int,
1040 unsigned int, unsigned int);
1041 int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *);
1042 int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *);
1046 * Prototypes
1049 /* General Functions */
1050 extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set);
1051 /* Attach/Detach Functions */
1052 extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
1053 extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode);
1054 extern void ath5k_hw_detach(struct ath5k_hw *ah);
1055 /* Reset Functions */
1056 extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
1057 /* Power management functions */
1058 extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
1059 /* DMA Related Functions */
1060 extern void ath5k_hw_start_rx(struct ath5k_hw *ah);
1061 extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
1062 extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah);
1063 extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr);
1064 extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue);
1065 extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1066 extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue);
1067 extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr);
1068 extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
1069 /* Interrupt handling */
1070 extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
1071 extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
1072 extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask);
1073 /* EEPROM access functions */
1074 extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain);
1075 /* Protocol Control Unit Functions */
1076 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
1077 /* BSSID Functions */
1078 extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
1079 extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
1080 extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
1081 extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
1082 /* Receive start/stop functions */
1083 extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
1084 extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah);
1085 /* RX Filter functions */
1086 extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
1087 extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index);
1088 extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
1089 extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
1090 extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
1091 /* Beacon related functions */
1092 extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
1093 extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
1094 extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
1095 extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
1096 #if 0
1097 extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
1098 extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
1099 extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
1100 #endif
1101 extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ath5k_mib_stats *statistics);
1102 /* ACK bit rate */
1103 void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
1104 /* ACK/CTS Timeouts */
1105 extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
1106 extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
1107 extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
1108 extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
1109 /* Key table (WEP) functions */
1110 extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
1111 extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
1112 extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
1113 extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
1114 /* Queue Control Unit, DFS Control Unit Functions */
1115 extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info);
1116 extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info);
1117 extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
1118 extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1119 extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1120 extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
1121 extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
1122 extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
1123 /* Hardware Descriptor Functions */
1124 extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags);
1125 /* GPIO Functions */
1126 extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
1127 extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
1128 extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
1129 extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
1130 extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
1131 extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
1132 /* Regulatory Domain/Channels Setup */
1133 extern u16 ath5k_get_regdomain(struct ath5k_hw *ah);
1134 /* Misc functions */
1135 extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
1138 /* Initial register settings functions */
1139 extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
1140 /* Initialize RF */
1141 extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
1142 extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
1143 extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
1144 extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
1147 /* PHY/RF channel functions */
1148 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
1149 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1150 /* PHY calibration */
1151 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1152 extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
1153 /* Misc PHY functions */
1154 extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
1155 extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
1156 extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
1157 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
1158 /* TX power setup */
1159 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
1160 extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
1163 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
1165 return ioread32(ah->ah_iobase + reg);
1168 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
1170 iowrite32(val, ah->ah_iobase + reg);
1173 #endif