2 * Common prep/pmac/chrp boot and setup code.
5 #include <linux/config.h>
6 #include <linux/module.h>
7 #include <linux/string.h>
8 #include <linux/sched.h>
9 #include <linux/init.h>
10 #include <linux/kernel.h>
11 #include <linux/reboot.h>
12 #include <linux/delay.h>
13 #include <linux/initrd.h>
14 #include <linux/ide.h>
15 #include <linux/tty.h>
16 #include <linux/bootmem.h>
17 #include <linux/seq_file.h>
18 #include <linux/root_dev.h>
19 #include <linux/cpu.h>
20 #include <linux/console.h>
22 #include <asm/residual.h>
25 #include <asm/processor.h>
26 #include <asm/pgtable.h>
27 #include <asm/setup.h>
28 #include <asm/amigappc.h>
31 #include <asm/cputable.h>
32 #include <asm/bootx.h>
33 #include <asm/btext.h>
34 #include <asm/machdep.h>
35 #include <asm/uaccess.h>
36 #include <asm/system.h>
37 #include <asm/pmac_feature.h>
38 #include <asm/sections.h>
39 #include <asm/nvram.h>
45 #if defined CONFIG_KGDB
49 extern void platform_init(void);
50 extern void bootx_init(unsigned long r4
, unsigned long phys
);
52 extern void ppc6xx_idle(void);
53 extern void power4_idle(void);
55 boot_infos_t
*boot_infos
;
56 struct ide_machdep_calls ppc_ide_md
;
58 /* XXX should go elsewhere */
59 int __irq_offset_value
;
60 EXPORT_SYMBOL(__irq_offset_value
);
62 unsigned long ISA_DMA_THRESHOLD
;
63 unsigned int DMA_MODE_READ
;
64 unsigned int DMA_MODE_WRITE
;
68 #ifdef CONFIG_PPC_MULTIPLATFORM
71 extern void prep_init(void);
72 extern void pmac_init(void);
73 extern void chrp_init(void);
76 #endif /* CONFIG_PPC_MULTIPLATFORM */
78 #ifdef CONFIG_MAGIC_SYSRQ
79 unsigned long SYSRQ_KEY
= 0x54;
80 #endif /* CONFIG_MAGIC_SYSRQ */
82 #ifdef CONFIG_VGA_CONSOLE
83 unsigned long vgacon_remap_base
;
86 struct machdep_calls ppc_md
;
87 EXPORT_SYMBOL(ppc_md
);
90 * These are used in binfmt_elf.c to put aux entries on the stack
91 * for each elf executable being started.
97 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_FB_VGA16) || \
98 defined(CONFIG_FB_VGA16_MODULE) || defined(CONFIG_FB_VESA)
99 struct screen_info screen_info
= {
100 0, 25, /* orig-x, orig-y */
102 0, /* orig-video-page */
103 0, /* orig-video-mode */
104 80, /* orig-video-cols */
105 0,0,0, /* ega_ax, ega_bx, ega_cx */
106 25, /* orig-video-lines */
107 1, /* orig-video-isVGA */
108 16 /* orig-video-points */
110 #endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */
113 * We're called here very early in the boot. We determine the machine
114 * type and call the appropriate low-level setup functions.
115 * -- Cort <cort@fsmlabs.com>
117 * Note that the kernel may be running at an address which is different
118 * from the address that it was linked at, so we must use RELOC/PTRRELOC
119 * to access static data (including strings). -- paulus
121 unsigned long __init
early_init(unsigned long dt_ptr
)
123 unsigned long offset
= reloc_offset();
125 /* First zero the BSS -- use memset_io, some platforms don't have
127 memset_io(PTRRELOC(&__bss_start
), 0, _end
- __bss_start
);
130 * Identify the CPU type and fix up code sections
131 * that depend on which cpu we have.
133 identify_cpu(offset
, 0);
134 do_cpu_ftr_fixups(offset
);
136 return KERNELBASE
+ offset
;
139 #ifdef CONFIG_PPC_MULTIPLATFORM
141 * The PPC_MULTIPLATFORM version of platform_init...
143 void __init
platform_init(void)
145 /* if we didn't get any bootinfo telling us what we are... */
147 /* prep boot loader tells us if we're prep or not */
148 if ( *(unsigned long *)(KERNELBASE
) == (0xdeadc0de) )
149 _machine
= _MACH_prep
;
152 #ifdef CONFIG_PPC_PREP
153 /* not much more to do here, if prep */
154 if (_machine
== _MACH_prep
) {
161 if (strstr(cmd_line
, "adb_sync")) {
162 extern int __adb_probe_sync
;
163 __adb_probe_sync
= 1;
165 #endif /* CONFIG_ADB */
168 #ifdef CONFIG_PPC_PMAC
173 #ifdef CONFIG_PPC_CHRP
183 * Find out what kind of machine we're on and save any data we need
184 * from the early boot process (devtree is copied on pmac by prom_init()).
185 * This is called very early on the boot process, after a minimal
186 * MMU environment has been set up but before MMU_init is called.
188 void __init
machine_init(unsigned long dt_ptr
, unsigned long phys
)
190 early_init_devtree(__va(dt_ptr
));
192 #ifdef CONFIG_CMDLINE
193 strlcpy(cmd_line
, CONFIG_CMDLINE
, sizeof(cmd_line
));
194 #endif /* CONFIG_CMDLINE */
199 ppc_md
.power_save
= ppc6xx_idle
;
203 ppc_md
.progress("id mach(): done", 0x200);
206 #ifdef CONFIG_BOOKE_WDT
207 /* Checks wdt=x and wdt_period=xx command-line option */
208 int __init
early_parse_wdt(char *p
)
210 if (p
&& strncmp(p
, "0", 1) != 0)
211 booke_wdt_enabled
= 1;
215 early_param("wdt", early_parse_wdt
);
217 int __init
early_parse_wdt_period (char *p
)
220 booke_wdt_period
= simple_strtoul(p
, NULL
, 0);
224 early_param("wdt_period", early_parse_wdt_period
);
225 #endif /* CONFIG_BOOKE_WDT */
227 /* Checks "l2cr=xxxx" command-line option */
228 int __init
ppc_setup_l2cr(char *str
)
230 if (cpu_has_feature(CPU_FTR_L2CR
)) {
231 unsigned long val
= simple_strtoul(str
, NULL
, 0);
232 printk(KERN_INFO
"l2cr set to %lx\n", val
);
233 _set_L2CR(0); /* force invalidate by disable cache */
234 _set_L2CR(val
); /* and enable it */
238 __setup("l2cr=", ppc_setup_l2cr
);
240 #ifdef CONFIG_GENERIC_NVRAM
242 /* Generic nvram hooks used by drivers/char/gen_nvram.c */
243 unsigned char nvram_read_byte(int addr
)
245 if (ppc_md
.nvram_read_val
)
246 return ppc_md
.nvram_read_val(addr
);
249 EXPORT_SYMBOL(nvram_read_byte
);
251 void nvram_write_byte(unsigned char val
, int addr
)
253 if (ppc_md
.nvram_write_val
)
254 ppc_md
.nvram_write_val(addr
, val
);
256 EXPORT_SYMBOL(nvram_write_byte
);
258 void nvram_sync(void)
260 if (ppc_md
.nvram_sync
)
263 EXPORT_SYMBOL(nvram_sync
);
265 #endif /* CONFIG_NVRAM */
267 static struct cpu cpu_devices
[NR_CPUS
];
269 int __init
ppc_init(void)
273 /* clear the progress line */
274 if ( ppc_md
.progress
) ppc_md
.progress(" ", 0xffff);
276 /* register CPU devices */
277 for (i
= 0; i
< NR_CPUS
; i
++)
279 register_cpu(&cpu_devices
[i
], i
, NULL
);
281 /* call platform init */
282 if (ppc_md
.init
!= NULL
) {
288 arch_initcall(ppc_init
);
290 /* Warning, IO base is not yet inited */
291 void __init
setup_arch(char **cmdline_p
)
294 extern void do_init_bootmem(void);
296 /* so udelay does something sensible, assume <= 1000 bogomips */
297 loops_per_jiffy
= 500000000 / HZ
;
299 unflatten_device_tree();
300 finish_device_tree();
302 #ifdef CONFIG_BOOTX_TEXT
306 #ifdef CONFIG_PPC_PMAC
307 /* This could be called "early setup arch", it must be done
308 * now because xmon need it
310 if (_machine
== _MACH_Pmac
)
311 pmac_feature_init(); /* New cool way */
316 if (strstr(cmd_line
, "xmon"))
318 #endif /* CONFIG_XMON */
319 if ( ppc_md
.progress
) ppc_md
.progress("setup_arch: enter", 0x3eab);
321 #if defined(CONFIG_KGDB)
322 if (ppc_md
.kgdb_map_scc
)
323 ppc_md
.kgdb_map_scc();
325 if (strstr(cmd_line
, "gdb")) {
327 ppc_md
.progress("setup_arch: kgdb breakpoint", 0x4000);
328 printk("kgdb breakpoint activated\n");
334 * Set cache line size based on type of cpu as a default.
335 * Systems with OF can look in the properties on the cpu node(s)
336 * for a possibly more accurate value.
338 if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE
)) {
339 dcache_bsize
= cur_cpu_spec
->dcache_bsize
;
340 icache_bsize
= cur_cpu_spec
->icache_bsize
;
343 ucache_bsize
= dcache_bsize
= icache_bsize
344 = cur_cpu_spec
->dcache_bsize
;
346 /* reboot on panic */
349 init_mm
.start_code
= PAGE_OFFSET
;
350 init_mm
.end_code
= (unsigned long) _etext
;
351 init_mm
.end_data
= (unsigned long) _edata
;
352 init_mm
.brk
= (unsigned long) klimit
;
354 /* Save unparsed command line copy for /proc/cmdline */
355 strlcpy(saved_command_line
, cmd_line
, COMMAND_LINE_SIZE
);
356 *cmdline_p
= cmd_line
;
360 /* set up the bootmem stuff with available memory */
362 if ( ppc_md
.progress
) ppc_md
.progress("setup_arch: bootmem", 0x3eab);
364 #ifdef CONFIG_PPC_OCP
365 /* Initialize OCP device list */
367 if ( ppc_md
.progress
) ppc_md
.progress("ocp: exit", 0x3eab);
370 #ifdef CONFIG_DUMMY_CONSOLE
371 conswitchp
= &dummy_con
;
375 if ( ppc_md
.progress
) ppc_md
.progress("arch: exit", 0x3eab);
379 /* this is for modules since _machine can be a define -- Cort */
380 ppc_md
.ppc_machine
= _machine
;