rtc-isl1208: use sysfs_{create/remove}_group
[firewire-audio.git] / drivers / scsi / sr.c
blob0a90abc7f140215fcc5aa50301ea927cd5564e8f
1 /*
2 * sr.c Copyright (C) 1992 David Giller
3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
5 * adapted from:
6 * sd.c Copyright (C) 1992 Drew Eckhardt
7 * Linux scsi disk driver by
8 * Drew Eckhardt <drew@colorado.edu>
10 * Modified by Eric Youngdale ericy@andante.org to
11 * add scatter-gather, multiple outstanding request, and other
12 * enhancements.
14 * Modified by Eric Youngdale eric@andante.org to support loadable
15 * low-level scsi drivers.
17 * Modified by Thomas Quinot thomas@melchior.cuivre.fdn.fr to
18 * provide auto-eject.
20 * Modified by Gerd Knorr <kraxel@cs.tu-berlin.de> to support the
21 * generic cdrom interface
23 * Modified by Jens Axboe <axboe@suse.de> - Uniform sr_packet()
24 * interface, capabilities probe additions, ioctl cleanups, etc.
26 * Modified by Richard Gooch <rgooch@atnf.csiro.au> to support devfs
28 * Modified by Jens Axboe <axboe@suse.de> - support DVD-RAM
29 * transparently and lose the GHOST hack
31 * Modified by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
32 * check resource allocation in sr_init and some cleanups
35 #include <linux/module.h>
36 #include <linux/fs.h>
37 #include <linux/kernel.h>
38 #include <linux/mm.h>
39 #include <linux/bio.h>
40 #include <linux/string.h>
41 #include <linux/errno.h>
42 #include <linux/cdrom.h>
43 #include <linux/interrupt.h>
44 #include <linux/init.h>
45 #include <linux/blkdev.h>
46 #include <linux/mutex.h>
47 #include <linux/slab.h>
48 #include <asm/uaccess.h>
50 #include <scsi/scsi.h>
51 #include <scsi/scsi_dbg.h>
52 #include <scsi/scsi_device.h>
53 #include <scsi/scsi_driver.h>
54 #include <scsi/scsi_cmnd.h>
55 #include <scsi/scsi_eh.h>
56 #include <scsi/scsi_host.h>
57 #include <scsi/scsi_ioctl.h> /* For the door lock/unlock commands */
59 #include "scsi_logging.h"
60 #include "sr.h"
63 MODULE_DESCRIPTION("SCSI cdrom (sr) driver");
64 MODULE_LICENSE("GPL");
65 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR);
66 MODULE_ALIAS_SCSI_DEVICE(TYPE_ROM);
67 MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM);
69 #define SR_DISKS 256
71 #define SR_CAPABILITIES \
72 (CDC_CLOSE_TRAY|CDC_OPEN_TRAY|CDC_LOCK|CDC_SELECT_SPEED| \
73 CDC_SELECT_DISC|CDC_MULTI_SESSION|CDC_MCN|CDC_MEDIA_CHANGED| \
74 CDC_PLAY_AUDIO|CDC_RESET|CDC_DRIVE_STATUS| \
75 CDC_CD_R|CDC_CD_RW|CDC_DVD|CDC_DVD_R|CDC_DVD_RAM|CDC_GENERIC_PACKET| \
76 CDC_MRW|CDC_MRW_W|CDC_RAM)
78 static int sr_probe(struct device *);
79 static int sr_remove(struct device *);
80 static int sr_done(struct scsi_cmnd *);
82 static struct scsi_driver sr_template = {
83 .owner = THIS_MODULE,
84 .gendrv = {
85 .name = "sr",
86 .probe = sr_probe,
87 .remove = sr_remove,
89 .done = sr_done,
92 static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG];
93 static DEFINE_SPINLOCK(sr_index_lock);
95 /* This semaphore is used to mediate the 0->1 reference get in the
96 * face of object destruction (i.e. we can't allow a get on an
97 * object after last put) */
98 static DEFINE_MUTEX(sr_ref_mutex);
100 static int sr_open(struct cdrom_device_info *, int);
101 static void sr_release(struct cdrom_device_info *);
103 static void get_sectorsize(struct scsi_cd *);
104 static void get_capabilities(struct scsi_cd *);
106 static int sr_media_change(struct cdrom_device_info *, int);
107 static int sr_packet(struct cdrom_device_info *, struct packet_command *);
109 static struct cdrom_device_ops sr_dops = {
110 .open = sr_open,
111 .release = sr_release,
112 .drive_status = sr_drive_status,
113 .media_changed = sr_media_change,
114 .tray_move = sr_tray_move,
115 .lock_door = sr_lock_door,
116 .select_speed = sr_select_speed,
117 .get_last_session = sr_get_last_session,
118 .get_mcn = sr_get_mcn,
119 .reset = sr_reset,
120 .audio_ioctl = sr_audio_ioctl,
121 .capability = SR_CAPABILITIES,
122 .generic_packet = sr_packet,
125 static void sr_kref_release(struct kref *kref);
127 static inline struct scsi_cd *scsi_cd(struct gendisk *disk)
129 return container_of(disk->private_data, struct scsi_cd, driver);
133 * The get and put routines for the struct scsi_cd. Note this entity
134 * has a scsi_device pointer and owns a reference to this.
136 static inline struct scsi_cd *scsi_cd_get(struct gendisk *disk)
138 struct scsi_cd *cd = NULL;
140 mutex_lock(&sr_ref_mutex);
141 if (disk->private_data == NULL)
142 goto out;
143 cd = scsi_cd(disk);
144 kref_get(&cd->kref);
145 if (scsi_device_get(cd->device))
146 goto out_put;
147 goto out;
149 out_put:
150 kref_put(&cd->kref, sr_kref_release);
151 cd = NULL;
152 out:
153 mutex_unlock(&sr_ref_mutex);
154 return cd;
157 static void scsi_cd_put(struct scsi_cd *cd)
159 struct scsi_device *sdev = cd->device;
161 mutex_lock(&sr_ref_mutex);
162 kref_put(&cd->kref, sr_kref_release);
163 scsi_device_put(sdev);
164 mutex_unlock(&sr_ref_mutex);
167 /* identical to scsi_test_unit_ready except that it doesn't
168 * eat the NOT_READY returns for removable media */
169 int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr)
171 int retries = MAX_RETRIES;
172 int the_result;
173 u8 cmd[] = {TEST_UNIT_READY, 0, 0, 0, 0, 0 };
175 /* issue TEST_UNIT_READY until the initial startup UNIT_ATTENTION
176 * conditions are gone, or a timeout happens
178 do {
179 the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL,
180 0, sshdr, SR_TIMEOUT,
181 retries--, NULL);
182 if (scsi_sense_valid(sshdr) &&
183 sshdr->sense_key == UNIT_ATTENTION)
184 sdev->changed = 1;
186 } while (retries > 0 &&
187 (!scsi_status_is_good(the_result) ||
188 (scsi_sense_valid(sshdr) &&
189 sshdr->sense_key == UNIT_ATTENTION)));
190 return the_result;
194 * This function checks to see if the media has been changed in the
195 * CDROM drive. It is possible that we have already sensed a change,
196 * or the drive may have sensed one and not yet reported it. We must
197 * be ready for either case. This function always reports the current
198 * value of the changed bit. If flag is 0, then the changed bit is reset.
199 * This function could be done as an ioctl, but we would need to have
200 * an inode for that to work, and we do not always have one.
203 static int sr_media_change(struct cdrom_device_info *cdi, int slot)
205 struct scsi_cd *cd = cdi->handle;
206 int retval;
207 struct scsi_sense_hdr *sshdr;
209 if (CDSL_CURRENT != slot) {
210 /* no changer support */
211 return -EINVAL;
214 sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
215 retval = sr_test_unit_ready(cd->device, sshdr);
216 if (retval || (scsi_sense_valid(sshdr) &&
217 /* 0x3a is medium not present */
218 sshdr->asc == 0x3a)) {
219 /* Media not present or unable to test, unit probably not
220 * ready. This usually means there is no disc in the drive.
221 * Mark as changed, and we will figure it out later once
222 * the drive is available again.
224 cd->device->changed = 1;
225 /* This will force a flush, if called from check_disk_change */
226 retval = 1;
227 goto out;
230 retval = cd->device->changed;
231 cd->device->changed = 0;
232 /* If the disk changed, the capacity will now be different,
233 * so we force a re-read of this information */
234 if (retval) {
235 /* check multisession offset etc */
236 sr_cd_check(cdi);
237 get_sectorsize(cd);
240 out:
241 /* Notify userspace, that media has changed. */
242 if (retval != cd->previous_state)
243 sdev_evt_send_simple(cd->device, SDEV_EVT_MEDIA_CHANGE,
244 GFP_KERNEL);
245 cd->previous_state = retval;
246 kfree(sshdr);
248 return retval;
252 * sr_done is the interrupt routine for the device driver.
254 * It will be notified on the end of a SCSI read / write, and will take one
255 * of several actions based on success or failure.
257 static int sr_done(struct scsi_cmnd *SCpnt)
259 int result = SCpnt->result;
260 int this_count = scsi_bufflen(SCpnt);
261 int good_bytes = (result == 0 ? this_count : 0);
262 int block_sectors = 0;
263 long error_sector;
264 struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
266 #ifdef DEBUG
267 printk("sr.c done: %x\n", result);
268 #endif
271 * Handle MEDIUM ERRORs or VOLUME OVERFLOWs that indicate partial
272 * success. Since this is a relatively rare error condition, no
273 * care is taken to avoid unnecessary additional work such as
274 * memcpy's that could be avoided.
276 if (driver_byte(result) != 0 && /* An error occurred */
277 (SCpnt->sense_buffer[0] & 0x7f) == 0x70) { /* Sense current */
278 switch (SCpnt->sense_buffer[2]) {
279 case MEDIUM_ERROR:
280 case VOLUME_OVERFLOW:
281 case ILLEGAL_REQUEST:
282 if (!(SCpnt->sense_buffer[0] & 0x90))
283 break;
284 error_sector = (SCpnt->sense_buffer[3] << 24) |
285 (SCpnt->sense_buffer[4] << 16) |
286 (SCpnt->sense_buffer[5] << 8) |
287 SCpnt->sense_buffer[6];
288 if (SCpnt->request->bio != NULL)
289 block_sectors =
290 bio_sectors(SCpnt->request->bio);
291 if (block_sectors < 4)
292 block_sectors = 4;
293 if (cd->device->sector_size == 2048)
294 error_sector <<= 2;
295 error_sector &= ~(block_sectors - 1);
296 good_bytes = (error_sector -
297 blk_rq_pos(SCpnt->request)) << 9;
298 if (good_bytes < 0 || good_bytes >= this_count)
299 good_bytes = 0;
301 * The SCSI specification allows for the value
302 * returned by READ CAPACITY to be up to 75 2K
303 * sectors past the last readable block.
304 * Therefore, if we hit a medium error within the
305 * last 75 2K sectors, we decrease the saved size
306 * value.
308 if (error_sector < get_capacity(cd->disk) &&
309 cd->capacity - error_sector < 4 * 75)
310 set_capacity(cd->disk, error_sector);
311 break;
313 case RECOVERED_ERROR:
314 good_bytes = this_count;
315 break;
317 default:
318 break;
322 return good_bytes;
325 static int sr_prep_fn(struct request_queue *q, struct request *rq)
327 int block = 0, this_count, s_size;
328 struct scsi_cd *cd;
329 struct scsi_cmnd *SCpnt;
330 struct scsi_device *sdp = q->queuedata;
331 int ret;
333 if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
334 ret = scsi_setup_blk_pc_cmnd(sdp, rq);
335 goto out;
336 } else if (rq->cmd_type != REQ_TYPE_FS) {
337 ret = BLKPREP_KILL;
338 goto out;
340 ret = scsi_setup_fs_cmnd(sdp, rq);
341 if (ret != BLKPREP_OK)
342 goto out;
343 SCpnt = rq->special;
344 cd = scsi_cd(rq->rq_disk);
346 /* from here on until we're complete, any goto out
347 * is used for a killable error condition */
348 ret = BLKPREP_KILL;
350 SCSI_LOG_HLQUEUE(1, printk("Doing sr request, dev = %s, block = %d\n",
351 cd->disk->disk_name, block));
353 if (!cd->device || !scsi_device_online(cd->device)) {
354 SCSI_LOG_HLQUEUE(2, printk("Finishing %u sectors\n",
355 blk_rq_sectors(rq)));
356 SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
357 goto out;
360 if (cd->device->changed) {
362 * quietly refuse to do anything to a changed disc until the
363 * changed bit has been reset
365 goto out;
369 * we do lazy blocksize switching (when reading XA sectors,
370 * see CDROMREADMODE2 ioctl)
372 s_size = cd->device->sector_size;
373 if (s_size > 2048) {
374 if (!in_interrupt())
375 sr_set_blocklength(cd, 2048);
376 else
377 printk("sr: can't switch blocksize: in interrupt\n");
380 if (s_size != 512 && s_size != 1024 && s_size != 2048) {
381 scmd_printk(KERN_ERR, SCpnt, "bad sector size %d\n", s_size);
382 goto out;
385 if (rq_data_dir(rq) == WRITE) {
386 if (!cd->device->writeable)
387 goto out;
388 SCpnt->cmnd[0] = WRITE_10;
389 SCpnt->sc_data_direction = DMA_TO_DEVICE;
390 cd->cdi.media_written = 1;
391 } else if (rq_data_dir(rq) == READ) {
392 SCpnt->cmnd[0] = READ_10;
393 SCpnt->sc_data_direction = DMA_FROM_DEVICE;
394 } else {
395 blk_dump_rq_flags(rq, "Unknown sr command");
396 goto out;
400 struct scatterlist *sg;
401 int i, size = 0, sg_count = scsi_sg_count(SCpnt);
403 scsi_for_each_sg(SCpnt, sg, sg_count, i)
404 size += sg->length;
406 if (size != scsi_bufflen(SCpnt)) {
407 scmd_printk(KERN_ERR, SCpnt,
408 "mismatch count %d, bytes %d\n",
409 size, scsi_bufflen(SCpnt));
410 if (scsi_bufflen(SCpnt) > size)
411 SCpnt->sdb.length = size;
416 * request doesn't start on hw block boundary, add scatter pads
418 if (((unsigned int)blk_rq_pos(rq) % (s_size >> 9)) ||
419 (scsi_bufflen(SCpnt) % s_size)) {
420 scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n");
421 goto out;
424 this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9);
427 SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%u 512 byte blocks.\n",
428 cd->cdi.name,
429 (rq_data_dir(rq) == WRITE) ?
430 "writing" : "reading",
431 this_count, blk_rq_sectors(rq)));
433 SCpnt->cmnd[1] = 0;
434 block = (unsigned int)blk_rq_pos(rq) / (s_size >> 9);
436 if (this_count > 0xffff) {
437 this_count = 0xffff;
438 SCpnt->sdb.length = this_count * s_size;
441 SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
442 SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
443 SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
444 SCpnt->cmnd[5] = (unsigned char) block & 0xff;
445 SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
446 SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
447 SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
450 * We shouldn't disconnect in the middle of a sector, so with a dumb
451 * host adapter, it's safe to assume that we can at least transfer
452 * this many bytes between each connect / disconnect.
454 SCpnt->transfersize = cd->device->sector_size;
455 SCpnt->underflow = this_count << 9;
456 SCpnt->allowed = MAX_RETRIES;
459 * This indicates that the command is ready from our end to be
460 * queued.
462 ret = BLKPREP_OK;
463 out:
464 return scsi_prep_return(q, rq, ret);
467 static int sr_block_open(struct block_device *bdev, fmode_t mode)
469 struct scsi_cd *cd = scsi_cd_get(bdev->bd_disk);
470 int ret = -ENXIO;
472 if (cd) {
473 ret = cdrom_open(&cd->cdi, bdev, mode);
474 if (ret)
475 scsi_cd_put(cd);
477 return ret;
480 static int sr_block_release(struct gendisk *disk, fmode_t mode)
482 struct scsi_cd *cd = scsi_cd(disk);
483 cdrom_release(&cd->cdi, mode);
484 scsi_cd_put(cd);
485 return 0;
488 static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
489 unsigned long arg)
491 struct scsi_cd *cd = scsi_cd(bdev->bd_disk);
492 struct scsi_device *sdev = cd->device;
493 void __user *argp = (void __user *)arg;
494 int ret;
497 * Send SCSI addressing ioctls directly to mid level, send other
498 * ioctls to cdrom/block level.
500 switch (cmd) {
501 case SCSI_IOCTL_GET_IDLUN:
502 case SCSI_IOCTL_GET_BUS_NUMBER:
503 return scsi_ioctl(sdev, cmd, argp);
506 ret = cdrom_ioctl(&cd->cdi, bdev, mode, cmd, arg);
507 if (ret != -ENOSYS)
508 return ret;
511 * ENODEV means that we didn't recognise the ioctl, or that we
512 * cannot execute it in the current device state. In either
513 * case fall through to scsi_ioctl, which will return ENDOEV again
514 * if it doesn't recognise the ioctl
516 ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
517 (mode & FMODE_NDELAY) != 0);
518 if (ret != -ENODEV)
519 return ret;
520 return scsi_ioctl(sdev, cmd, argp);
523 static int sr_block_media_changed(struct gendisk *disk)
525 struct scsi_cd *cd = scsi_cd(disk);
526 return cdrom_media_changed(&cd->cdi);
529 static const struct block_device_operations sr_bdops =
531 .owner = THIS_MODULE,
532 .open = sr_block_open,
533 .release = sr_block_release,
534 .locked_ioctl = sr_block_ioctl,
535 .media_changed = sr_block_media_changed,
537 * No compat_ioctl for now because sr_block_ioctl never
538 * seems to pass arbitary ioctls down to host drivers.
542 static int sr_open(struct cdrom_device_info *cdi, int purpose)
544 struct scsi_cd *cd = cdi->handle;
545 struct scsi_device *sdev = cd->device;
546 int retval;
549 * If the device is in error recovery, wait until it is done.
550 * If the device is offline, then disallow any access to it.
552 retval = -ENXIO;
553 if (!scsi_block_when_processing_errors(sdev))
554 goto error_out;
556 return 0;
558 error_out:
559 return retval;
562 static void sr_release(struct cdrom_device_info *cdi)
564 struct scsi_cd *cd = cdi->handle;
566 if (cd->device->sector_size > 2048)
567 sr_set_blocklength(cd, 2048);
571 static int sr_probe(struct device *dev)
573 struct scsi_device *sdev = to_scsi_device(dev);
574 struct gendisk *disk;
575 struct scsi_cd *cd;
576 int minor, error;
578 error = -ENODEV;
579 if (sdev->type != TYPE_ROM && sdev->type != TYPE_WORM)
580 goto fail;
582 error = -ENOMEM;
583 cd = kzalloc(sizeof(*cd), GFP_KERNEL);
584 if (!cd)
585 goto fail;
587 kref_init(&cd->kref);
589 disk = alloc_disk(1);
590 if (!disk)
591 goto fail_free;
593 spin_lock(&sr_index_lock);
594 minor = find_first_zero_bit(sr_index_bits, SR_DISKS);
595 if (minor == SR_DISKS) {
596 spin_unlock(&sr_index_lock);
597 error = -EBUSY;
598 goto fail_put;
600 __set_bit(minor, sr_index_bits);
601 spin_unlock(&sr_index_lock);
603 disk->major = SCSI_CDROM_MAJOR;
604 disk->first_minor = minor;
605 sprintf(disk->disk_name, "sr%d", minor);
606 disk->fops = &sr_bdops;
607 disk->flags = GENHD_FL_CD;
609 blk_queue_rq_timeout(sdev->request_queue, SR_TIMEOUT);
611 cd->device = sdev;
612 cd->disk = disk;
613 cd->driver = &sr_template;
614 cd->disk = disk;
615 cd->capacity = 0x1fffff;
616 cd->device->changed = 1; /* force recheck CD type */
617 cd->previous_state = 1;
618 cd->use = 1;
619 cd->readcd_known = 0;
620 cd->readcd_cdda = 0;
622 cd->cdi.ops = &sr_dops;
623 cd->cdi.handle = cd;
624 cd->cdi.mask = 0;
625 cd->cdi.capacity = 1;
626 sprintf(cd->cdi.name, "sr%d", minor);
628 sdev->sector_size = 2048; /* A guess, just in case */
630 /* FIXME: need to handle a get_capabilities failure properly ?? */
631 get_capabilities(cd);
632 blk_queue_prep_rq(sdev->request_queue, sr_prep_fn);
633 sr_vendor_init(cd);
635 disk->driverfs_dev = &sdev->sdev_gendev;
636 set_capacity(disk, cd->capacity);
637 disk->private_data = &cd->driver;
638 disk->queue = sdev->request_queue;
639 cd->cdi.disk = disk;
641 if (register_cdrom(&cd->cdi))
642 goto fail_put;
644 dev_set_drvdata(dev, cd);
645 disk->flags |= GENHD_FL_REMOVABLE;
646 add_disk(disk);
648 sdev_printk(KERN_DEBUG, sdev,
649 "Attached scsi CD-ROM %s\n", cd->cdi.name);
650 return 0;
652 fail_put:
653 put_disk(disk);
654 fail_free:
655 kfree(cd);
656 fail:
657 return error;
661 static void get_sectorsize(struct scsi_cd *cd)
663 unsigned char cmd[10];
664 unsigned char buffer[8];
665 int the_result, retries = 3;
666 int sector_size;
667 struct request_queue *queue;
669 do {
670 cmd[0] = READ_CAPACITY;
671 memset((void *) &cmd[1], 0, 9);
672 memset(buffer, 0, sizeof(buffer));
674 /* Do the command and wait.. */
675 the_result = scsi_execute_req(cd->device, cmd, DMA_FROM_DEVICE,
676 buffer, sizeof(buffer), NULL,
677 SR_TIMEOUT, MAX_RETRIES, NULL);
679 retries--;
681 } while (the_result && retries);
684 if (the_result) {
685 cd->capacity = 0x1fffff;
686 sector_size = 2048; /* A guess, just in case */
687 } else {
688 long last_written;
690 cd->capacity = 1 + ((buffer[0] << 24) | (buffer[1] << 16) |
691 (buffer[2] << 8) | buffer[3]);
693 * READ_CAPACITY doesn't return the correct size on
694 * certain UDF media. If last_written is larger, use
695 * it instead.
697 * http://bugzilla.kernel.org/show_bug.cgi?id=9668
699 if (!cdrom_get_last_written(&cd->cdi, &last_written))
700 cd->capacity = max_t(long, cd->capacity, last_written);
702 sector_size = (buffer[4] << 24) |
703 (buffer[5] << 16) | (buffer[6] << 8) | buffer[7];
704 switch (sector_size) {
706 * HP 4020i CD-Recorder reports 2340 byte sectors
707 * Philips CD-Writers report 2352 byte sectors
709 * Use 2k sectors for them..
711 case 0:
712 case 2340:
713 case 2352:
714 sector_size = 2048;
715 /* fall through */
716 case 2048:
717 cd->capacity *= 4;
718 /* fall through */
719 case 512:
720 break;
721 default:
722 printk("%s: unsupported sector size %d.\n",
723 cd->cdi.name, sector_size);
724 cd->capacity = 0;
727 cd->device->sector_size = sector_size;
730 * Add this so that we have the ability to correctly gauge
731 * what the device is capable of.
733 set_capacity(cd->disk, cd->capacity);
736 queue = cd->device->request_queue;
737 blk_queue_logical_block_size(queue, sector_size);
739 return;
742 static void get_capabilities(struct scsi_cd *cd)
744 unsigned char *buffer;
745 struct scsi_mode_data data;
746 struct scsi_sense_hdr sshdr;
747 int rc, n;
749 static const char *loadmech[] =
751 "caddy",
752 "tray",
753 "pop-up",
755 "changer",
756 "cartridge changer",
762 /* allocate transfer buffer */
763 buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
764 if (!buffer) {
765 printk(KERN_ERR "sr: out of memory.\n");
766 return;
769 /* eat unit attentions */
770 sr_test_unit_ready(cd->device, &sshdr);
772 /* ask for mode page 0x2a */
773 rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, 128,
774 SR_TIMEOUT, 3, &data, NULL);
776 if (!scsi_status_is_good(rc)) {
777 /* failed, drive doesn't have capabilities mode page */
778 cd->cdi.speed = 1;
779 cd->cdi.mask |= (CDC_CD_R | CDC_CD_RW | CDC_DVD_R |
780 CDC_DVD | CDC_DVD_RAM |
781 CDC_SELECT_DISC | CDC_SELECT_SPEED |
782 CDC_MRW | CDC_MRW_W | CDC_RAM);
783 kfree(buffer);
784 printk("%s: scsi-1 drive\n", cd->cdi.name);
785 return;
788 n = data.header_length + data.block_descriptor_length;
789 cd->cdi.speed = ((buffer[n + 8] << 8) + buffer[n + 9]) / 176;
790 cd->readcd_known = 1;
791 cd->readcd_cdda = buffer[n + 5] & 0x01;
792 /* print some capability bits */
793 printk("%s: scsi3-mmc drive: %dx/%dx %s%s%s%s%s%s\n", cd->cdi.name,
794 ((buffer[n + 14] << 8) + buffer[n + 15]) / 176,
795 cd->cdi.speed,
796 buffer[n + 3] & 0x01 ? "writer " : "", /* CD Writer */
797 buffer[n + 3] & 0x20 ? "dvd-ram " : "",
798 buffer[n + 2] & 0x02 ? "cd/rw " : "", /* can read rewriteable */
799 buffer[n + 4] & 0x20 ? "xa/form2 " : "", /* can read xa/from2 */
800 buffer[n + 5] & 0x01 ? "cdda " : "", /* can read audio data */
801 loadmech[buffer[n + 6] >> 5]);
802 if ((buffer[n + 6] >> 5) == 0)
803 /* caddy drives can't close tray... */
804 cd->cdi.mask |= CDC_CLOSE_TRAY;
805 if ((buffer[n + 2] & 0x8) == 0)
806 /* not a DVD drive */
807 cd->cdi.mask |= CDC_DVD;
808 if ((buffer[n + 3] & 0x20) == 0)
809 /* can't write DVD-RAM media */
810 cd->cdi.mask |= CDC_DVD_RAM;
811 if ((buffer[n + 3] & 0x10) == 0)
812 /* can't write DVD-R media */
813 cd->cdi.mask |= CDC_DVD_R;
814 if ((buffer[n + 3] & 0x2) == 0)
815 /* can't write CD-RW media */
816 cd->cdi.mask |= CDC_CD_RW;
817 if ((buffer[n + 3] & 0x1) == 0)
818 /* can't write CD-R media */
819 cd->cdi.mask |= CDC_CD_R;
820 if ((buffer[n + 6] & 0x8) == 0)
821 /* can't eject */
822 cd->cdi.mask |= CDC_OPEN_TRAY;
824 if ((buffer[n + 6] >> 5) == mechtype_individual_changer ||
825 (buffer[n + 6] >> 5) == mechtype_cartridge_changer)
826 cd->cdi.capacity =
827 cdrom_number_of_slots(&cd->cdi);
828 if (cd->cdi.capacity <= 1)
829 /* not a changer */
830 cd->cdi.mask |= CDC_SELECT_DISC;
831 /*else I don't think it can close its tray
832 cd->cdi.mask |= CDC_CLOSE_TRAY; */
835 * if DVD-RAM, MRW-W or CD-RW, we are randomly writable
837 if ((cd->cdi.mask & (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) !=
838 (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) {
839 cd->device->writeable = 1;
842 kfree(buffer);
846 * sr_packet() is the entry point for the generic commands generated
847 * by the Uniform CD-ROM layer.
849 static int sr_packet(struct cdrom_device_info *cdi,
850 struct packet_command *cgc)
852 if (cgc->timeout <= 0)
853 cgc->timeout = IOCTL_TIMEOUT;
855 sr_do_ioctl(cdi->handle, cgc);
857 return cgc->stat;
861 * sr_kref_release - Called to free the scsi_cd structure
862 * @kref: pointer to embedded kref
864 * sr_ref_mutex must be held entering this routine. Because it is
865 * called on last put, you should always use the scsi_cd_get()
866 * scsi_cd_put() helpers which manipulate the semaphore directly
867 * and never do a direct kref_put().
869 static void sr_kref_release(struct kref *kref)
871 struct scsi_cd *cd = container_of(kref, struct scsi_cd, kref);
872 struct gendisk *disk = cd->disk;
874 spin_lock(&sr_index_lock);
875 clear_bit(MINOR(disk_devt(disk)), sr_index_bits);
876 spin_unlock(&sr_index_lock);
878 unregister_cdrom(&cd->cdi);
880 disk->private_data = NULL;
882 put_disk(disk);
884 kfree(cd);
887 static int sr_remove(struct device *dev)
889 struct scsi_cd *cd = dev_get_drvdata(dev);
891 blk_queue_prep_rq(cd->device->request_queue, scsi_prep_fn);
892 del_gendisk(cd->disk);
894 mutex_lock(&sr_ref_mutex);
895 kref_put(&cd->kref, sr_kref_release);
896 mutex_unlock(&sr_ref_mutex);
898 return 0;
901 static int __init init_sr(void)
903 int rc;
905 rc = register_blkdev(SCSI_CDROM_MAJOR, "sr");
906 if (rc)
907 return rc;
908 rc = scsi_register_driver(&sr_template.gendrv);
909 if (rc)
910 unregister_blkdev(SCSI_CDROM_MAJOR, "sr");
912 return rc;
915 static void __exit exit_sr(void)
917 scsi_unregister_driver(&sr_template.gendrv);
918 unregister_blkdev(SCSI_CDROM_MAJOR, "sr");
921 module_init(init_sr);
922 module_exit(exit_sr);
923 MODULE_LICENSE("GPL");