[PATCH] ARM: 2723/2: remove __udivdi3 and __umoddi3 from the kernel

[firewire-audio.git] / include / scsi / scsi_host.h

#ifndef _SCSI_SCSI_HOST_H
#define _SCSI_SCSI_HOST_H

#include <linux/device.h>
#include <linux/list.h>
#include <linux/types.h>
#include <linux/workqueue.h>

struct block_device;
struct module;
struct scsi_cmnd;
struct scsi_device;
struct scsi_target;
struct Scsi_Host;
struct scsi_host_cmd_pool;
struct scsi_transport_template;


/*
 * The various choices mean:
 * NONE: Self evident.  Host adapter is not capable of scatter-gather.
 * ALL:  Means that the host adapter module can do scatter-gather,
 *       and that there is no limit to the size of the table to which
 *       we scatter/gather data.
 * Anything else:  Indicates the maximum number of chains that can be
 *       used in one scatter-gather request.
 */
#define SG_NONE 0
#define SG_ALL 0xff


#define DISABLE_CLUSTERING 0
#define ENABLE_CLUSTERING 1

enum scsi_eh_timer_return {
        EH_NOT_HANDLED,
        EH_HANDLED,
        EH_RESET_TIMER,
};


struct scsi_host_template {
        struct module *module;
        const char *name;

        /*
         * Used to initialize old-style drivers.  For new-style drivers
         * just perform all work in your module initialization function.
         *
         * Status:  OBSOLETE
         */
        int (* detect)(struct scsi_host_template *);

        /*
         * Used as unload callback for hosts with old-style drivers.
         *
         * Status: OBSOLETE
         */
        int (* release)(struct Scsi_Host *);

        /*
         * The info function will return whatever useful information the
         * developer sees fit.  If not provided, then the name field will
         * be used instead.
         *
         * Status: OPTIONAL
         */
        const char *(* info)(struct Scsi_Host *);

        /*
         * Ioctl interface
         *
         * Status: OPTIONAL
         */
        int (* ioctl)(struct scsi_device *dev, int cmd, void __user *arg);


#ifdef CONFIG_COMPAT
        /* 
         * Compat handler. Handle 32bit ABI.
         * When unknown ioctl is passed return -ENOIOCTLCMD.
         *
         * Status: OPTIONAL
         */
        int (* compat_ioctl)(struct scsi_device *dev, int cmd, void __user *arg);
#endif

        /*
         * The queuecommand function is used to queue up a scsi
         * command block to the LLDD.  When the driver finished
         * processing the command the done callback is invoked.
         *
         * If queuecommand returns 0, then the HBA has accepted the
         * command.  The done() function must be called on the command
         * when the driver has finished with it. (you may call done on the
         * command before queuecommand returns, but in this case you
         * *must* return 0 from queuecommand).
         *
         * Queuecommand may also reject the command, in which case it may
         * not touch the command and must not call done() for it.
         *
         * There are two possible rejection returns:
         *
         *   SCSI_MLQUEUE_DEVICE_BUSY: Block this device temporarily, but
         *   allow commands to other devices serviced by this host.
         *
         *   SCSI_MLQUEUE_HOST_BUSY: Block all devices served by this
         *   host temporarily.
         *
         * For compatibility, any other non-zero return is treated the
         * same as SCSI_MLQUEUE_HOST_BUSY.
         *
         * NOTE: "temporarily" means either until the next command for#
         * this device/host completes, or a period of time determined by
         * I/O pressure in the system if there are no other outstanding
         * commands.
         *
         * STATUS: REQUIRED
         */
        int (* queuecommand)(struct scsi_cmnd *,
                             void (*done)(struct scsi_cmnd *));

        /*
         * This is an error handling strategy routine.  You don't need to
         * define one of these if you don't want to - there is a default
         * routine that is present that should work in most cases.  For those
         * driver authors that have the inclination and ability to write their
         * own strategy routine, this is where it is specified.  Note - the
         * strategy routine is *ALWAYS* run in the context of the kernel eh
         * thread.  Thus you are guaranteed to *NOT* be in an interrupt
         * handler when you execute this, and you are also guaranteed to
         * *NOT* have any other commands being queued while you are in the
         * strategy routine. When you return from this function, operations
         * return to normal.
         *
         * See scsi_error.c scsi_unjam_host for additional comments about
         * what this function should and should not be attempting to do.
         *
         * Status: REQUIRED     (at least one of them)
         */
        int (* eh_strategy_handler)(struct Scsi_Host *);
        int (* eh_abort_handler)(struct scsi_cmnd *);
        int (* eh_device_reset_handler)(struct scsi_cmnd *);
        int (* eh_bus_reset_handler)(struct scsi_cmnd *);
        int (* eh_host_reset_handler)(struct scsi_cmnd *);

        /*
         * This is an optional routine to notify the host that the scsi
         * timer just fired.  The returns tell the timer routine what to
         * do about this:
         *
         * EH_HANDLED:          I fixed the error, please complete the command
         * EH_RESET_TIMER:      I need more time, reset the timer and
         *                      begin counting again
         * EH_NOT_HANDLED       Begin normal error recovery
         *
         * Status: OPTIONAL
         */
        enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);

        /*
         * Before the mid layer attempts to scan for a new device where none
         * currently exists, it will call this entry in your driver.  Should
         * your driver need to allocate any structs or perform any other init
         * items in order to send commands to a currently unused target/lun
         * combo, then this is where you can perform those allocations.  This
         * is specifically so that drivers won't have to perform any kind of
         * "is this a new device" checks in their queuecommand routine,
         * thereby making the hot path a bit quicker.
         *
         * Return values: 0 on success, non-0 on failure
         *
         * Deallocation:  If we didn't find any devices at this ID, you will
         * get an immediate call to slave_destroy().  If we find something
         * here then you will get a call to slave_configure(), then the
         * device will be used for however long it is kept around, then when
         * the device is removed from the system (or * possibly at reboot
         * time), you will then get a call to slave_destroy().  This is
         * assuming you implement slave_configure and slave_destroy.
         * However, if you allocate memory and hang it off the device struct,
         * then you must implement the slave_destroy() routine at a minimum
         * in order to avoid leaking memory
         * each time a device is tore down.
         *
         * Status: OPTIONAL
         */
        int (* slave_alloc)(struct scsi_device *);

        /*
         * Once the device has responded to an INQUIRY and we know the
         * device is online, we call into the low level driver with the
         * struct scsi_device *.  If the low level device driver implements
         * this function, it *must* perform the task of setting the queue
         * depth on the device.  All other tasks are optional and depend
         * on what the driver supports and various implementation details.
         * 
         * Things currently recommended to be handled at this time include:
         *
         * 1.  Setting the device queue depth.  Proper setting of this is
         *     described in the comments for scsi_adjust_queue_depth.
         * 2.  Determining if the device supports the various synchronous
         *     negotiation protocols.  The device struct will already have
         *     responded to INQUIRY and the results of the standard items
         *     will have been shoved into the various device flag bits, eg.
         *     device->sdtr will be true if the device supports SDTR messages.
         * 3.  Allocating command structs that the device will need.
         * 4.  Setting the default timeout on this device (if needed).
         * 5.  Anything else the low level driver might want to do on a device
         *     specific setup basis...
         * 6.  Return 0 on success, non-0 on error.  The device will be marked
         *     as offline on error so that no access will occur.  If you return
         *     non-0, your slave_destroy routine will never get called for this
         *     device, so don't leave any loose memory hanging around, clean
         *     up after yourself before returning non-0
         *
         * Status: OPTIONAL
         */
        int (* slave_configure)(struct scsi_device *);

        /*
         * Immediately prior to deallocating the device and after all activity
         * has ceased the mid layer calls this point so that the low level
         * driver may completely detach itself from the scsi device and vice
         * versa.  The low level driver is responsible for freeing any memory
         * it allocated in the slave_alloc or slave_configure calls. 
         *
         * Status: OPTIONAL
         */
        void (* slave_destroy)(struct scsi_device *);

        /*
         * Before the mid layer attempts to scan for a new device attached
         * to a target where no target currently exists, it will call this
         * entry in your driver.  Should your driver need to allocate any
         * structs or perform any other init items in order to send commands
         * to a currently unused target, then this is where you can perform
         * those allocations.
         *
         * Return values: 0 on success, non-0 on failure
         *
         * Status: OPTIONAL
         */
        int (* target_alloc)(struct scsi_target *);

        /*
         * Immediately prior to deallocating the target structure, and
         * after all activity to attached scsi devices has ceased, the
         * midlayer calls this point so that the driver may deallocate
         * and terminate any references to the target.
         *
         * Status: OPTIONAL
         */
        void (* target_destroy)(struct scsi_target *);

        /*
         * fill in this function to allow the queue depth of this host
         * to be changeable (on a per device basis).  returns either
         * the current queue depth setting (may be different from what
         * was passed in) or an error.  An error should only be
         * returned if the requested depth is legal but the driver was
         * unable to set it.  If the requested depth is illegal, the
         * driver should set and return the closest legal queue depth.
         *
         */
        int (* change_queue_depth)(struct scsi_device *, int);

        /*
         * fill in this function to allow the changing of tag types
         * (this also allows the enabling/disabling of tag command
         * queueing).  An error should only be returned if something
         * went wrong in the driver while trying to set the tag type.
         * If the driver doesn't support the requested tag type, then
         * it should set the closest type it does support without
         * returning an error.  Returns the actual tag type set.
         */
        int (* change_queue_type)(struct scsi_device *, int);

        /*
         * This function determines the bios parameters for a given
         * harddisk.  These tend to be numbers that are made up by
         * the host adapter.  Parameters:
         * size, device, list (heads, sectors, cylinders)
         *
         * Status: OPTIONAL */
        int (* bios_param)(struct scsi_device *, struct block_device *,
                        sector_t, int []);

        /*
         * Can be used to export driver statistics and other infos to the
         * world outside the kernel ie. userspace and it also provides an
         * interface to feed the driver with information.
         *
         * Status: OBSOLETE
         */
        int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int);

        /*
         * Name of proc directory
         */
        char *proc_name;

        /*
         * Used to store the procfs directory if a driver implements the
         * proc_info method.
         */
        struct proc_dir_entry *proc_dir;

        /*
         * This determines if we will use a non-interrupt driven
         * or an interrupt driven scheme,  It is set to the maximum number
         * of simultaneous commands a given host adapter will accept.
         */
        int can_queue;

        /*
         * In many instances, especially where disconnect / reconnect are
         * supported, our host also has an ID on the SCSI bus.  If this is
         * the case, then it must be reserved.  Please set this_id to -1 if
         * your setup is in single initiator mode, and the host lacks an
         * ID.
         */
        int this_id;

        /*
         * This determines the degree to which the host adapter is capable
         * of scatter-gather.
         */
        unsigned short sg_tablesize;

        /*
         * If the host adapter has limitations beside segment count
         */
        unsigned short max_sectors;

        /*
         * dma scatter gather segment boundary limit. a segment crossing this
         * boundary will be split in two.
         */
        unsigned long dma_boundary;

        /*
         * This specifies "machine infinity" for host templates which don't
         * limit the transfer size.  Note this limit represents an absolute
         * maximum, and may be over the transfer limits allowed for
         * individual devices (e.g. 256 for SCSI-1)
         */
#define SCSI_DEFAULT_MAX_SECTORS        1024

        /*
         * True if this host adapter can make good use of linked commands.
         * This will allow more than one command to be queued to a given
         * unit on a given host.  Set this to the maximum number of command
         * blocks to be provided for each device.  Set this to 1 for one
         * command block per lun, 2 for two, etc.  Do not set this to 0.
         * You should make sure that the host adapter will do the right thing
         * before you try setting this above 1.
         */
        short cmd_per_lun;

        /*
         * present contains counter indicating how many boards of this
         * type were found when we did the scan.
         */
        unsigned char present;

        /*
         * true if this host adapter uses unchecked DMA onto an ISA bus.
         */
        unsigned unchecked_isa_dma:1;

        /*
         * true if this host adapter can make good use of clustering.
         * I originally thought that if the tablesize was large that it
         * was a waste of CPU cycles to prepare a cluster list, but
         * it works out that the Buslogic is faster if you use a smaller
         * number of segments (i.e. use clustering).  I guess it is
         * inefficient.
         */
        unsigned use_clustering:1;

        /*
         * True for emulated SCSI host adapters (e.g. ATAPI)
         */
        unsigned emulated:1;

        /*
         * True if the low-level driver performs its own reset-settle delays.
         */
        unsigned skip_settle_delay:1;

        /*
         * ordered write support
         */
        unsigned ordered_flush:1;
        unsigned ordered_tag:1;

        /*
         * Countdown for host blocking with no commands outstanding
         */
        unsigned int max_host_blocked;

        /*
         * Default value for the blocking.  If the queue is empty,
         * host_blocked counts down in the request_fn until it restarts
         * host operations as zero is reached.  
         *
         * FIXME: This should probably be a value in the template
         */
#define SCSI_DEFAULT_HOST_BLOCKED       7

        /*
         * Pointer to the sysfs class properties for this host, NULL terminated.
         */
        struct class_device_attribute **shost_attrs;

        /*
         * Pointer to the SCSI device properties for this host, NULL terminated.
         */
        struct device_attribute **sdev_attrs;

        /*
         * List of hosts per template.
         *
         * This is only for use by scsi_module.c for legacy templates.
         * For these access to it is synchronized implicitly by
         * module_init/module_exit.
         */
        struct list_head legacy_hosts;
};

/*
 * shost states
 */
enum {
        SHOST_ADD,
        SHOST_DEL,
        SHOST_CANCEL,
        SHOST_RECOVERY,
};

struct Scsi_Host {
        /*
         * __devices is protected by the host_lock, but you should
         * usually use scsi_device_lookup / shost_for_each_device
         * to access it and don't care about locking yourself.
         * In the rare case of beeing in irq context you can use
         * their __ prefixed variants with the lock held. NEVER
         * access this list directly from a driver.
         */
        struct list_head        __devices;
        struct list_head        __targets;
        
        struct scsi_host_cmd_pool *cmd_pool;
        spinlock_t              free_list_lock;
        struct list_head        free_list; /* backup store of cmd structs */
        struct list_head        starved_list;

        spinlock_t              default_lock;
        spinlock_t              *host_lock;

        struct semaphore        scan_mutex;/* serialize scanning activity */

        struct list_head        eh_cmd_q;
        struct task_struct    * ehandler;  /* Error recovery thread. */
        struct semaphore      * eh_wait;   /* The error recovery thread waits
                                              on this. */
        struct completion     * eh_notify; /* wait for eh to begin or end */
        struct semaphore      * eh_action; /* Wait for specific actions on the
                                          host. */
        unsigned int            eh_active:1; /* Indicates the eh thread is awake and active if
                                          this is true. */
        unsigned int            eh_kill:1; /* set when killing the eh thread */
        wait_queue_head_t       host_wait;
        struct scsi_host_template *hostt;
        struct scsi_transport_template *transportt;

        /*
         * The following two fields are protected with host_lock;
         * however, eh routines can safely access during eh processing
         * without acquiring the lock.
         */
        unsigned int host_busy;            /* commands actually active on low-level */
        unsigned int host_failed;          /* commands that failed. */
    
        unsigned short host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
        int resetting; /* if set, it means that last_reset is a valid value */
        unsigned long last_reset;

        /*
         * These three parameters can be used to allow for wide scsi,
         * and for host adapters that support multiple busses
         * The first two should be set to 1 more than the actual max id
         * or lun (i.e. 8 for normal systems).
         */
        unsigned int max_id;
        unsigned int max_lun;
        unsigned int max_channel;

        /*
         * This is a unique identifier that must be assigned so that we
         * have some way of identifying each detected host adapter properly
         * and uniquely.  For hosts that do not support more than one card
         * in the system at one time, this does not need to be set.  It is
         * initialized to 0 in scsi_register.
         */
        unsigned int unique_id;

        /*
         * The maximum length of SCSI commands that this host can accept.
         * Probably 12 for most host adapters, but could be 16 for others.
         * For drivers that don't set this field, a value of 12 is
         * assumed.  I am leaving this as a number rather than a bit
         * because you never know what subsequent SCSI standards might do
         * (i.e. could there be a 20 byte or a 24-byte command a few years
         * down the road?).  
         */
        unsigned char max_cmd_len;

        int this_id;
        int can_queue;
        short cmd_per_lun;
        short unsigned int sg_tablesize;
        short unsigned int max_sectors;
        unsigned long dma_boundary;
        /* 
         * Used to assign serial numbers to the cmds.
         * Protected by the host lock.
         */
        unsigned long cmd_serial_number, cmd_pid; 
        
        unsigned unchecked_isa_dma:1;
        unsigned use_clustering:1;
        unsigned use_blk_tcq:1;

        /*
         * Host has requested that no further requests come through for the
         * time being.
         */
        unsigned host_self_blocked:1;
    
        /*
         * Host uses correct SCSI ordering not PC ordering. The bit is
         * set for the minority of drivers whose authors actually read
         * the spec ;)
         */
        unsigned reverse_ordering:1;

        /*
         * ordered write support
         */
        unsigned ordered_flush:1;
        unsigned ordered_tag:1;

        /*
         * Optional work queue to be utilized by the transport
         */
        char work_q_name[KOBJ_NAME_LEN];
        struct workqueue_struct *work_q;

        /*
         * Host has rejected a command because it was busy.
         */
        unsigned int host_blocked;

        /*
         * Value host_blocked counts down from
         */
        unsigned int max_host_blocked;

        /* legacy crap */
        unsigned long base;
        unsigned long io_port;
        unsigned char n_io_port;
        unsigned char dma_channel;
        unsigned int  irq;
        

        unsigned long shost_state;

        /* ldm bits */
        struct device           shost_gendev;
        struct class_device     shost_classdev;

        /*
         * List of hosts per template.
         *
         * This is only for use by scsi_module.c for legacy templates.
         * For these access to it is synchronized implicitly by
         * module_init/module_exit.
         */
        struct list_head sht_legacy_list;

        /*
         * Points to the transport data (if any) which is allocated
         * separately
         */
        void *shost_data;

        /*
         * We should ensure that this is aligned, both for better performance
         * and also because some compilers (m68k) don't automatically force
         * alignment to a long boundary.
         */
        unsigned long hostdata[0]  /* Used for storage of host specific stuff */
                __attribute__ ((aligned (sizeof(unsigned long))));
};

#define         class_to_shost(d)       \
        container_of(d, struct Scsi_Host, shost_classdev)

int scsi_is_host_device(const struct device *);

static inline struct Scsi_Host *dev_to_shost(struct device *dev)
{
        while (!scsi_is_host_device(dev)) {
                if (!dev->parent)
                        return NULL;
                dev = dev->parent;
        }
        return container_of(dev, struct Scsi_Host, shost_gendev);
}

extern int scsi_queue_work(struct Scsi_Host *, struct work_struct *);
extern void scsi_flush_work(struct Scsi_Host *);

extern struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *, int);
extern int __must_check scsi_add_host(struct Scsi_Host *, struct device *);
extern void scsi_scan_host(struct Scsi_Host *);
extern void scsi_scan_single_target(struct Scsi_Host *, unsigned int,
        unsigned int);
extern void scsi_rescan_device(struct device *);
extern void scsi_remove_host(struct Scsi_Host *);
extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
extern void scsi_host_put(struct Scsi_Host *t);
extern struct Scsi_Host *scsi_host_lookup(unsigned short);

extern u64 scsi_calculate_bounce_limit(struct Scsi_Host *);

static inline void scsi_assign_lock(struct Scsi_Host *shost, spinlock_t *lock)
{
        shost->host_lock = lock;
}

static inline void scsi_set_device(struct Scsi_Host *shost,
                                   struct device *dev)
{
        shost->shost_gendev.parent = dev;
}

static inline struct device *scsi_get_device(struct Scsi_Host *shost)
{
        return shost->shost_gendev.parent;
}

extern void scsi_unblock_requests(struct Scsi_Host *);
extern void scsi_block_requests(struct Scsi_Host *);

struct class_container;
/*
 * These two functions are used to allocate and free a pseudo device
 * which will connect to the host adapter itself rather than any
 * physical device.  You must deallocate when you are done with the
 * thing.  This physical pseudo-device isn't real and won't be available
 * from any high-level drivers.
 */
extern void scsi_free_host_dev(struct scsi_device *);
extern struct scsi_device *scsi_get_host_dev(struct Scsi_Host *);

/* legacy interfaces */
extern struct Scsi_Host *scsi_register(struct scsi_host_template *, int);
extern void scsi_unregister(struct Scsi_Host *);

#endif /* _SCSI_SCSI_HOST_H */