[SCSI] ipr: Reduce default error log size
[firewire-audio.git] / drivers / scsi / ipr.c
blob3c32e08e71c1c07fc35b370273258bd9d48fbf4b
1 /*
2 * ipr.c -- driver for IBM Power Linux RAID adapters
4 * Written By: Brian King <brking@us.ibm.com>, IBM Corporation
6 * Copyright (C) 2003, 2004 IBM Corporation
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 * Notes:
27 * This driver is used to control the following SCSI adapters:
29 * IBM iSeries: 5702, 5703, 2780, 5709, 570A, 570B
31 * IBM pSeries: PCI-X Dual Channel Ultra 320 SCSI RAID Adapter
32 * PCI-X Dual Channel Ultra 320 SCSI Adapter
33 * PCI-X Dual Channel Ultra 320 SCSI RAID Enablement Card
34 * Embedded SCSI adapter on p615 and p655 systems
36 * Supported Hardware Features:
37 * - Ultra 320 SCSI controller
38 * - PCI-X host interface
39 * - Embedded PowerPC RISC Processor and Hardware XOR DMA Engine
40 * - Non-Volatile Write Cache
41 * - Supports attachment of non-RAID disks, tape, and optical devices
42 * - RAID Levels 0, 5, 10
43 * - Hot spare
44 * - Background Parity Checking
45 * - Background Data Scrubbing
46 * - Ability to increase the capacity of an existing RAID 5 disk array
47 * by adding disks
49 * Driver Features:
50 * - Tagged command queuing
51 * - Adapter microcode download
52 * - PCI hot plug
53 * - SCSI device hot plug
57 #include <linux/fs.h>
58 #include <linux/init.h>
59 #include <linux/types.h>
60 #include <linux/errno.h>
61 #include <linux/kernel.h>
62 #include <linux/ioport.h>
63 #include <linux/delay.h>
64 #include <linux/pci.h>
65 #include <linux/wait.h>
66 #include <linux/spinlock.h>
67 #include <linux/sched.h>
68 #include <linux/interrupt.h>
69 #include <linux/blkdev.h>
70 #include <linux/firmware.h>
71 #include <linux/module.h>
72 #include <linux/moduleparam.h>
73 #include <linux/libata.h>
74 #include <asm/io.h>
75 #include <asm/irq.h>
76 #include <asm/processor.h>
77 #include <scsi/scsi.h>
78 #include <scsi/scsi_host.h>
79 #include <scsi/scsi_tcq.h>
80 #include <scsi/scsi_eh.h>
81 #include <scsi/scsi_cmnd.h>
82 #include "ipr.h"
85 * Global Data
87 static struct list_head ipr_ioa_head = LIST_HEAD_INIT(ipr_ioa_head);
88 static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL;
89 static unsigned int ipr_max_speed = 1;
90 static int ipr_testmode = 0;
91 static unsigned int ipr_fastfail = 0;
92 static unsigned int ipr_transop_timeout = IPR_OPERATIONAL_TIMEOUT;
93 static unsigned int ipr_enable_cache = 1;
94 static unsigned int ipr_debug = 0;
95 static int ipr_auto_create = 1;
96 static DEFINE_SPINLOCK(ipr_driver_lock);
98 /* This table describes the differences between DMA controller chips */
99 static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
100 { /* Gemstone, Citrine, Obsidian, and Obsidian-E */
101 .mailbox = 0x0042C,
102 .cache_line_size = 0x20,
104 .set_interrupt_mask_reg = 0x0022C,
105 .clr_interrupt_mask_reg = 0x00230,
106 .sense_interrupt_mask_reg = 0x0022C,
107 .clr_interrupt_reg = 0x00228,
108 .sense_interrupt_reg = 0x00224,
109 .ioarrin_reg = 0x00404,
110 .sense_uproc_interrupt_reg = 0x00214,
111 .set_uproc_interrupt_reg = 0x00214,
112 .clr_uproc_interrupt_reg = 0x00218
115 { /* Snipe and Scamp */
116 .mailbox = 0x0052C,
117 .cache_line_size = 0x20,
119 .set_interrupt_mask_reg = 0x00288,
120 .clr_interrupt_mask_reg = 0x0028C,
121 .sense_interrupt_mask_reg = 0x00288,
122 .clr_interrupt_reg = 0x00284,
123 .sense_interrupt_reg = 0x00280,
124 .ioarrin_reg = 0x00504,
125 .sense_uproc_interrupt_reg = 0x00290,
126 .set_uproc_interrupt_reg = 0x00290,
127 .clr_uproc_interrupt_reg = 0x00294
132 static const struct ipr_chip_t ipr_chip[] = {
133 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, &ipr_chip_cfg[0] },
134 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, &ipr_chip_cfg[0] },
135 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, &ipr_chip_cfg[0] },
136 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, &ipr_chip_cfg[0] },
137 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, &ipr_chip_cfg[0] },
138 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, &ipr_chip_cfg[1] },
139 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, &ipr_chip_cfg[1] }
142 static int ipr_max_bus_speeds [] = {
143 IPR_80MBs_SCSI_RATE, IPR_U160_SCSI_RATE, IPR_U320_SCSI_RATE
146 MODULE_AUTHOR("Brian King <brking@us.ibm.com>");
147 MODULE_DESCRIPTION("IBM Power RAID SCSI Adapter Driver");
148 module_param_named(max_speed, ipr_max_speed, uint, 0);
149 MODULE_PARM_DESC(max_speed, "Maximum bus speed (0-2). Default: 1=U160. Speeds: 0=80 MB/s, 1=U160, 2=U320");
150 module_param_named(log_level, ipr_log_level, uint, 0);
151 MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver");
152 module_param_named(testmode, ipr_testmode, int, 0);
153 MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations");
154 module_param_named(fastfail, ipr_fastfail, int, 0);
155 MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries");
156 module_param_named(transop_timeout, ipr_transop_timeout, int, 0);
157 MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)");
158 module_param_named(enable_cache, ipr_enable_cache, int, 0);
159 MODULE_PARM_DESC(enable_cache, "Enable adapter's non-volatile write cache (default: 1)");
160 module_param_named(debug, ipr_debug, int, 0);
161 MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)");
162 module_param_named(auto_create, ipr_auto_create, int, 0);
163 MODULE_PARM_DESC(auto_create, "Auto-create single device RAID 0 arrays when initialized (default: 1)");
164 MODULE_LICENSE("GPL");
165 MODULE_VERSION(IPR_DRIVER_VERSION);
167 /* A constant array of IOASCs/URCs/Error Messages */
168 static const
169 struct ipr_error_table_t ipr_error_table[] = {
170 {0x00000000, 1, 1,
171 "8155: An unknown error was received"},
172 {0x00330000, 0, 0,
173 "Soft underlength error"},
174 {0x005A0000, 0, 0,
175 "Command to be cancelled not found"},
176 {0x00808000, 0, 0,
177 "Qualified success"},
178 {0x01080000, 1, 1,
179 "FFFE: Soft device bus error recovered by the IOA"},
180 {0x01088100, 0, 1,
181 "4101: Soft device bus fabric error"},
182 {0x01170600, 0, 1,
183 "FFF9: Device sector reassign successful"},
184 {0x01170900, 0, 1,
185 "FFF7: Media error recovered by device rewrite procedures"},
186 {0x01180200, 0, 1,
187 "7001: IOA sector reassignment successful"},
188 {0x01180500, 0, 1,
189 "FFF9: Soft media error. Sector reassignment recommended"},
190 {0x01180600, 0, 1,
191 "FFF7: Media error recovered by IOA rewrite procedures"},
192 {0x01418000, 0, 1,
193 "FF3D: Soft PCI bus error recovered by the IOA"},
194 {0x01440000, 1, 1,
195 "FFF6: Device hardware error recovered by the IOA"},
196 {0x01448100, 0, 1,
197 "FFF6: Device hardware error recovered by the device"},
198 {0x01448200, 1, 1,
199 "FF3D: Soft IOA error recovered by the IOA"},
200 {0x01448300, 0, 1,
201 "FFFA: Undefined device response recovered by the IOA"},
202 {0x014A0000, 1, 1,
203 "FFF6: Device bus error, message or command phase"},
204 {0x014A8000, 0, 1,
205 "FFFE: Task Management Function failed"},
206 {0x015D0000, 0, 1,
207 "FFF6: Failure prediction threshold exceeded"},
208 {0x015D9200, 0, 1,
209 "8009: Impending cache battery pack failure"},
210 {0x02040400, 0, 0,
211 "34FF: Disk device format in progress"},
212 {0x023F0000, 0, 0,
213 "Synchronization required"},
214 {0x024E0000, 0, 0,
215 "No ready, IOA shutdown"},
216 {0x025A0000, 0, 0,
217 "Not ready, IOA has been shutdown"},
218 {0x02670100, 0, 1,
219 "3020: Storage subsystem configuration error"},
220 {0x03110B00, 0, 0,
221 "FFF5: Medium error, data unreadable, recommend reassign"},
222 {0x03110C00, 0, 0,
223 "7000: Medium error, data unreadable, do not reassign"},
224 {0x03310000, 0, 1,
225 "FFF3: Disk media format bad"},
226 {0x04050000, 0, 1,
227 "3002: Addressed device failed to respond to selection"},
228 {0x04080000, 1, 1,
229 "3100: Device bus error"},
230 {0x04080100, 0, 1,
231 "3109: IOA timed out a device command"},
232 {0x04088000, 0, 0,
233 "3120: SCSI bus is not operational"},
234 {0x04088100, 0, 1,
235 "4100: Hard device bus fabric error"},
236 {0x04118000, 0, 1,
237 "9000: IOA reserved area data check"},
238 {0x04118100, 0, 1,
239 "9001: IOA reserved area invalid data pattern"},
240 {0x04118200, 0, 1,
241 "9002: IOA reserved area LRC error"},
242 {0x04320000, 0, 1,
243 "102E: Out of alternate sectors for disk storage"},
244 {0x04330000, 1, 1,
245 "FFF4: Data transfer underlength error"},
246 {0x04338000, 1, 1,
247 "FFF4: Data transfer overlength error"},
248 {0x043E0100, 0, 1,
249 "3400: Logical unit failure"},
250 {0x04408500, 0, 1,
251 "FFF4: Device microcode is corrupt"},
252 {0x04418000, 1, 1,
253 "8150: PCI bus error"},
254 {0x04430000, 1, 0,
255 "Unsupported device bus message received"},
256 {0x04440000, 1, 1,
257 "FFF4: Disk device problem"},
258 {0x04448200, 1, 1,
259 "8150: Permanent IOA failure"},
260 {0x04448300, 0, 1,
261 "3010: Disk device returned wrong response to IOA"},
262 {0x04448400, 0, 1,
263 "8151: IOA microcode error"},
264 {0x04448500, 0, 0,
265 "Device bus status error"},
266 {0x04448600, 0, 1,
267 "8157: IOA error requiring IOA reset to recover"},
268 {0x04448700, 0, 0,
269 "ATA device status error"},
270 {0x04490000, 0, 0,
271 "Message reject received from the device"},
272 {0x04449200, 0, 1,
273 "8008: A permanent cache battery pack failure occurred"},
274 {0x0444A000, 0, 1,
275 "9090: Disk unit has been modified after the last known status"},
276 {0x0444A200, 0, 1,
277 "9081: IOA detected device error"},
278 {0x0444A300, 0, 1,
279 "9082: IOA detected device error"},
280 {0x044A0000, 1, 1,
281 "3110: Device bus error, message or command phase"},
282 {0x044A8000, 1, 1,
283 "3110: SAS Command / Task Management Function failed"},
284 {0x04670400, 0, 1,
285 "9091: Incorrect hardware configuration change has been detected"},
286 {0x04678000, 0, 1,
287 "9073: Invalid multi-adapter configuration"},
288 {0x04678100, 0, 1,
289 "4010: Incorrect connection between cascaded expanders"},
290 {0x04678200, 0, 1,
291 "4020: Connections exceed IOA design limits"},
292 {0x04678300, 0, 1,
293 "4030: Incorrect multipath connection"},
294 {0x04679000, 0, 1,
295 "4110: Unsupported enclosure function"},
296 {0x046E0000, 0, 1,
297 "FFF4: Command to logical unit failed"},
298 {0x05240000, 1, 0,
299 "Illegal request, invalid request type or request packet"},
300 {0x05250000, 0, 0,
301 "Illegal request, invalid resource handle"},
302 {0x05258000, 0, 0,
303 "Illegal request, commands not allowed to this device"},
304 {0x05258100, 0, 0,
305 "Illegal request, command not allowed to a secondary adapter"},
306 {0x05260000, 0, 0,
307 "Illegal request, invalid field in parameter list"},
308 {0x05260100, 0, 0,
309 "Illegal request, parameter not supported"},
310 {0x05260200, 0, 0,
311 "Illegal request, parameter value invalid"},
312 {0x052C0000, 0, 0,
313 "Illegal request, command sequence error"},
314 {0x052C8000, 1, 0,
315 "Illegal request, dual adapter support not enabled"},
316 {0x06040500, 0, 1,
317 "9031: Array protection temporarily suspended, protection resuming"},
318 {0x06040600, 0, 1,
319 "9040: Array protection temporarily suspended, protection resuming"},
320 {0x06288000, 0, 1,
321 "3140: Device bus not ready to ready transition"},
322 {0x06290000, 0, 1,
323 "FFFB: SCSI bus was reset"},
324 {0x06290500, 0, 0,
325 "FFFE: SCSI bus transition to single ended"},
326 {0x06290600, 0, 0,
327 "FFFE: SCSI bus transition to LVD"},
328 {0x06298000, 0, 1,
329 "FFFB: SCSI bus was reset by another initiator"},
330 {0x063F0300, 0, 1,
331 "3029: A device replacement has occurred"},
332 {0x064C8000, 0, 1,
333 "9051: IOA cache data exists for a missing or failed device"},
334 {0x064C8100, 0, 1,
335 "9055: Auxiliary cache IOA contains cache data needed by the primary IOA"},
336 {0x06670100, 0, 1,
337 "9025: Disk unit is not supported at its physical location"},
338 {0x06670600, 0, 1,
339 "3020: IOA detected a SCSI bus configuration error"},
340 {0x06678000, 0, 1,
341 "3150: SCSI bus configuration error"},
342 {0x06678100, 0, 1,
343 "9074: Asymmetric advanced function disk configuration"},
344 {0x06678300, 0, 1,
345 "4040: Incomplete multipath connection between IOA and enclosure"},
346 {0x06678400, 0, 1,
347 "4041: Incomplete multipath connection between enclosure and device"},
348 {0x06678500, 0, 1,
349 "9075: Incomplete multipath connection between IOA and remote IOA"},
350 {0x06678600, 0, 1,
351 "9076: Configuration error, missing remote IOA"},
352 {0x06679100, 0, 1,
353 "4050: Enclosure does not support a required multipath function"},
354 {0x06690200, 0, 1,
355 "9041: Array protection temporarily suspended"},
356 {0x06698200, 0, 1,
357 "9042: Corrupt array parity detected on specified device"},
358 {0x066B0200, 0, 1,
359 "9030: Array no longer protected due to missing or failed disk unit"},
360 {0x066B8000, 0, 1,
361 "9071: Link operational transition"},
362 {0x066B8100, 0, 1,
363 "9072: Link not operational transition"},
364 {0x066B8200, 0, 1,
365 "9032: Array exposed but still protected"},
366 {0x066B9100, 0, 1,
367 "4061: Multipath redundancy level got better"},
368 {0x066B9200, 0, 1,
369 "4060: Multipath redundancy level got worse"},
370 {0x07270000, 0, 0,
371 "Failure due to other device"},
372 {0x07278000, 0, 1,
373 "9008: IOA does not support functions expected by devices"},
374 {0x07278100, 0, 1,
375 "9010: Cache data associated with attached devices cannot be found"},
376 {0x07278200, 0, 1,
377 "9011: Cache data belongs to devices other than those attached"},
378 {0x07278400, 0, 1,
379 "9020: Array missing 2 or more devices with only 1 device present"},
380 {0x07278500, 0, 1,
381 "9021: Array missing 2 or more devices with 2 or more devices present"},
382 {0x07278600, 0, 1,
383 "9022: Exposed array is missing a required device"},
384 {0x07278700, 0, 1,
385 "9023: Array member(s) not at required physical locations"},
386 {0x07278800, 0, 1,
387 "9024: Array not functional due to present hardware configuration"},
388 {0x07278900, 0, 1,
389 "9026: Array not functional due to present hardware configuration"},
390 {0x07278A00, 0, 1,
391 "9027: Array is missing a device and parity is out of sync"},
392 {0x07278B00, 0, 1,
393 "9028: Maximum number of arrays already exist"},
394 {0x07278C00, 0, 1,
395 "9050: Required cache data cannot be located for a disk unit"},
396 {0x07278D00, 0, 1,
397 "9052: Cache data exists for a device that has been modified"},
398 {0x07278F00, 0, 1,
399 "9054: IOA resources not available due to previous problems"},
400 {0x07279100, 0, 1,
401 "9092: Disk unit requires initialization before use"},
402 {0x07279200, 0, 1,
403 "9029: Incorrect hardware configuration change has been detected"},
404 {0x07279600, 0, 1,
405 "9060: One or more disk pairs are missing from an array"},
406 {0x07279700, 0, 1,
407 "9061: One or more disks are missing from an array"},
408 {0x07279800, 0, 1,
409 "9062: One or more disks are missing from an array"},
410 {0x07279900, 0, 1,
411 "9063: Maximum number of functional arrays has been exceeded"},
412 {0x0B260000, 0, 0,
413 "Aborted command, invalid descriptor"},
414 {0x0B5A0000, 0, 0,
415 "Command terminated by host"}
418 static const struct ipr_ses_table_entry ipr_ses_table[] = {
419 { "2104-DL1 ", "XXXXXXXXXXXXXXXX", 80 },
420 { "2104-TL1 ", "XXXXXXXXXXXXXXXX", 80 },
421 { "HSBP07M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 7 slot */
422 { "HSBP05M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 5 slot */
423 { "HSBP05M S U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Bowtie */
424 { "HSBP06E ASU2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* MartinFenning */
425 { "2104-DU3 ", "XXXXXXXXXXXXXXXX", 160 },
426 { "2104-TU3 ", "XXXXXXXXXXXXXXXX", 160 },
427 { "HSBP04C RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
428 { "HSBP06E RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 },
429 { "St V1S2 ", "XXXXXXXXXXXXXXXX", 160 },
430 { "HSBPD4M PU3SCSI", "XXXXXXX*XXXXXXXX", 160 },
431 { "VSBPD1H U3SCSI", "XXXXXXX*XXXXXXXX", 160 }
435 * Function Prototypes
437 static int ipr_reset_alert(struct ipr_cmnd *);
438 static void ipr_process_ccn(struct ipr_cmnd *);
439 static void ipr_process_error(struct ipr_cmnd *);
440 static void ipr_reset_ioa_job(struct ipr_cmnd *);
441 static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *,
442 enum ipr_shutdown_type);
444 #ifdef CONFIG_SCSI_IPR_TRACE
446 * ipr_trc_hook - Add a trace entry to the driver trace
447 * @ipr_cmd: ipr command struct
448 * @type: trace type
449 * @add_data: additional data
451 * Return value:
452 * none
454 static void ipr_trc_hook(struct ipr_cmnd *ipr_cmd,
455 u8 type, u32 add_data)
457 struct ipr_trace_entry *trace_entry;
458 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
460 trace_entry = &ioa_cfg->trace[ioa_cfg->trace_index++];
461 trace_entry->time = jiffies;
462 trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0];
463 trace_entry->type = type;
464 trace_entry->ata_op_code = ipr_cmd->ioarcb.add_data.u.regs.command;
465 trace_entry->cmd_index = ipr_cmd->cmd_index & 0xff;
466 trace_entry->res_handle = ipr_cmd->ioarcb.res_handle;
467 trace_entry->u.add_data = add_data;
469 #else
470 #define ipr_trc_hook(ipr_cmd, type, add_data) do { } while(0)
471 #endif
474 * ipr_reinit_ipr_cmnd - Re-initialize an IPR Cmnd block for reuse
475 * @ipr_cmd: ipr command struct
477 * Return value:
478 * none
480 static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
482 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
483 struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
485 memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
486 ioarcb->write_data_transfer_length = 0;
487 ioarcb->read_data_transfer_length = 0;
488 ioarcb->write_ioadl_len = 0;
489 ioarcb->read_ioadl_len = 0;
490 ioasa->ioasc = 0;
491 ioasa->residual_data_len = 0;
492 ioasa->u.gata.status = 0;
494 ipr_cmd->scsi_cmd = NULL;
495 ipr_cmd->qc = NULL;
496 ipr_cmd->sense_buffer[0] = 0;
497 ipr_cmd->dma_use_sg = 0;
501 * ipr_init_ipr_cmnd - Initialize an IPR Cmnd block
502 * @ipr_cmd: ipr command struct
504 * Return value:
505 * none
507 static void ipr_init_ipr_cmnd(struct ipr_cmnd *ipr_cmd)
509 ipr_reinit_ipr_cmnd(ipr_cmd);
510 ipr_cmd->u.scratch = 0;
511 ipr_cmd->sibling = NULL;
512 init_timer(&ipr_cmd->timer);
516 * ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block
517 * @ioa_cfg: ioa config struct
519 * Return value:
520 * pointer to ipr command struct
522 static
523 struct ipr_cmnd *ipr_get_free_ipr_cmnd(struct ipr_ioa_cfg *ioa_cfg)
525 struct ipr_cmnd *ipr_cmd;
527 ipr_cmd = list_entry(ioa_cfg->free_q.next, struct ipr_cmnd, queue);
528 list_del(&ipr_cmd->queue);
529 ipr_init_ipr_cmnd(ipr_cmd);
531 return ipr_cmd;
535 * ipr_unmap_sglist - Unmap scatterlist if mapped
536 * @ioa_cfg: ioa config struct
537 * @ipr_cmd: ipr command struct
539 * Return value:
540 * nothing
542 static void ipr_unmap_sglist(struct ipr_ioa_cfg *ioa_cfg,
543 struct ipr_cmnd *ipr_cmd)
545 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
547 if (ipr_cmd->dma_use_sg) {
548 if (scsi_cmd->use_sg > 0) {
549 pci_unmap_sg(ioa_cfg->pdev, scsi_cmd->request_buffer,
550 scsi_cmd->use_sg,
551 scsi_cmd->sc_data_direction);
552 } else {
553 pci_unmap_single(ioa_cfg->pdev, ipr_cmd->dma_handle,
554 scsi_cmd->request_bufflen,
555 scsi_cmd->sc_data_direction);
561 * ipr_mask_and_clear_interrupts - Mask all and clear specified interrupts
562 * @ioa_cfg: ioa config struct
563 * @clr_ints: interrupts to clear
565 * This function masks all interrupts on the adapter, then clears the
566 * interrupts specified in the mask
568 * Return value:
569 * none
571 static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg,
572 u32 clr_ints)
574 volatile u32 int_reg;
576 /* Stop new interrupts */
577 ioa_cfg->allow_interrupts = 0;
579 /* Set interrupt mask to stop all new interrupts */
580 writel(~0, ioa_cfg->regs.set_interrupt_mask_reg);
582 /* Clear any pending interrupts */
583 writel(clr_ints, ioa_cfg->regs.clr_interrupt_reg);
584 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
588 * ipr_save_pcix_cmd_reg - Save PCI-X command register
589 * @ioa_cfg: ioa config struct
591 * Return value:
592 * 0 on success / -EIO on failure
594 static int ipr_save_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
596 int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX);
598 if (pcix_cmd_reg == 0) {
599 dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n");
600 return -EIO;
603 if (pci_read_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD,
604 &ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) {
605 dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n");
606 return -EIO;
609 ioa_cfg->saved_pcix_cmd_reg |= PCI_X_CMD_DPERR_E | PCI_X_CMD_ERO;
610 return 0;
614 * ipr_set_pcix_cmd_reg - Setup PCI-X command register
615 * @ioa_cfg: ioa config struct
617 * Return value:
618 * 0 on success / -EIO on failure
620 static int ipr_set_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg)
622 int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX);
624 if (pcix_cmd_reg) {
625 if (pci_write_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD,
626 ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) {
627 dev_err(&ioa_cfg->pdev->dev, "Failed to setup PCI-X command register\n");
628 return -EIO;
630 } else {
631 dev_err(&ioa_cfg->pdev->dev,
632 "Failed to setup PCI-X command register\n");
633 return -EIO;
636 return 0;
640 * ipr_sata_eh_done - done function for aborted SATA commands
641 * @ipr_cmd: ipr command struct
643 * This function is invoked for ops generated to SATA
644 * devices which are being aborted.
646 * Return value:
647 * none
649 static void ipr_sata_eh_done(struct ipr_cmnd *ipr_cmd)
651 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
652 struct ata_queued_cmd *qc = ipr_cmd->qc;
653 struct ipr_sata_port *sata_port = qc->ap->private_data;
655 qc->err_mask |= AC_ERR_OTHER;
656 sata_port->ioasa.status |= ATA_BUSY;
657 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
658 ata_qc_complete(qc);
662 * ipr_scsi_eh_done - mid-layer done function for aborted ops
663 * @ipr_cmd: ipr command struct
665 * This function is invoked by the interrupt handler for
666 * ops generated by the SCSI mid-layer which are being aborted.
668 * Return value:
669 * none
671 static void ipr_scsi_eh_done(struct ipr_cmnd *ipr_cmd)
673 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
674 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
676 scsi_cmd->result |= (DID_ERROR << 16);
678 ipr_unmap_sglist(ioa_cfg, ipr_cmd);
679 scsi_cmd->scsi_done(scsi_cmd);
680 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
684 * ipr_fail_all_ops - Fails all outstanding ops.
685 * @ioa_cfg: ioa config struct
687 * This function fails all outstanding ops.
689 * Return value:
690 * none
692 static void ipr_fail_all_ops(struct ipr_ioa_cfg *ioa_cfg)
694 struct ipr_cmnd *ipr_cmd, *temp;
696 ENTER;
697 list_for_each_entry_safe(ipr_cmd, temp, &ioa_cfg->pending_q, queue) {
698 list_del(&ipr_cmd->queue);
700 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_IOA_WAS_RESET);
701 ipr_cmd->ioasa.ilid = cpu_to_be32(IPR_DRIVER_ILID);
703 if (ipr_cmd->scsi_cmd)
704 ipr_cmd->done = ipr_scsi_eh_done;
705 else if (ipr_cmd->qc)
706 ipr_cmd->done = ipr_sata_eh_done;
708 ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, IPR_IOASC_IOA_WAS_RESET);
709 del_timer(&ipr_cmd->timer);
710 ipr_cmd->done(ipr_cmd);
713 LEAVE;
717 * ipr_do_req - Send driver initiated requests.
718 * @ipr_cmd: ipr command struct
719 * @done: done function
720 * @timeout_func: timeout function
721 * @timeout: timeout value
723 * This function sends the specified command to the adapter with the
724 * timeout given. The done function is invoked on command completion.
726 * Return value:
727 * none
729 static void ipr_do_req(struct ipr_cmnd *ipr_cmd,
730 void (*done) (struct ipr_cmnd *),
731 void (*timeout_func) (struct ipr_cmnd *), u32 timeout)
733 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
735 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
737 ipr_cmd->done = done;
739 ipr_cmd->timer.data = (unsigned long) ipr_cmd;
740 ipr_cmd->timer.expires = jiffies + timeout;
741 ipr_cmd->timer.function = (void (*)(unsigned long))timeout_func;
743 add_timer(&ipr_cmd->timer);
745 ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0);
747 mb();
748 writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
749 ioa_cfg->regs.ioarrin_reg);
753 * ipr_internal_cmd_done - Op done function for an internally generated op.
754 * @ipr_cmd: ipr command struct
756 * This function is the op done function for an internally generated,
757 * blocking op. It simply wakes the sleeping thread.
759 * Return value:
760 * none
762 static void ipr_internal_cmd_done(struct ipr_cmnd *ipr_cmd)
764 if (ipr_cmd->sibling)
765 ipr_cmd->sibling = NULL;
766 else
767 complete(&ipr_cmd->completion);
771 * ipr_send_blocking_cmd - Send command and sleep on its completion.
772 * @ipr_cmd: ipr command struct
773 * @timeout_func: function to invoke if command times out
774 * @timeout: timeout
776 * Return value:
777 * none
779 static void ipr_send_blocking_cmd(struct ipr_cmnd *ipr_cmd,
780 void (*timeout_func) (struct ipr_cmnd *ipr_cmd),
781 u32 timeout)
783 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
785 init_completion(&ipr_cmd->completion);
786 ipr_do_req(ipr_cmd, ipr_internal_cmd_done, timeout_func, timeout);
788 spin_unlock_irq(ioa_cfg->host->host_lock);
789 wait_for_completion(&ipr_cmd->completion);
790 spin_lock_irq(ioa_cfg->host->host_lock);
794 * ipr_send_hcam - Send an HCAM to the adapter.
795 * @ioa_cfg: ioa config struct
796 * @type: HCAM type
797 * @hostrcb: hostrcb struct
799 * This function will send a Host Controlled Async command to the adapter.
800 * If HCAMs are currently not allowed to be issued to the adapter, it will
801 * place the hostrcb on the free queue.
803 * Return value:
804 * none
806 static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type,
807 struct ipr_hostrcb *hostrcb)
809 struct ipr_cmnd *ipr_cmd;
810 struct ipr_ioarcb *ioarcb;
812 if (ioa_cfg->allow_cmds) {
813 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
814 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
815 list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_pending_q);
817 ipr_cmd->u.hostrcb = hostrcb;
818 ioarcb = &ipr_cmd->ioarcb;
820 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
821 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_HCAM;
822 ioarcb->cmd_pkt.cdb[0] = IPR_HOST_CONTROLLED_ASYNC;
823 ioarcb->cmd_pkt.cdb[1] = type;
824 ioarcb->cmd_pkt.cdb[7] = (sizeof(hostrcb->hcam) >> 8) & 0xff;
825 ioarcb->cmd_pkt.cdb[8] = sizeof(hostrcb->hcam) & 0xff;
827 ioarcb->read_data_transfer_length = cpu_to_be32(sizeof(hostrcb->hcam));
828 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
829 ipr_cmd->ioadl[0].flags_and_data_len =
830 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(hostrcb->hcam));
831 ipr_cmd->ioadl[0].address = cpu_to_be32(hostrcb->hostrcb_dma);
833 if (type == IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE)
834 ipr_cmd->done = ipr_process_ccn;
835 else
836 ipr_cmd->done = ipr_process_error;
838 ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR);
840 mb();
841 writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
842 ioa_cfg->regs.ioarrin_reg);
843 } else {
844 list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
849 * ipr_init_res_entry - Initialize a resource entry struct.
850 * @res: resource entry struct
852 * Return value:
853 * none
855 static void ipr_init_res_entry(struct ipr_resource_entry *res)
857 res->needs_sync_complete = 0;
858 res->in_erp = 0;
859 res->add_to_ml = 0;
860 res->del_from_ml = 0;
861 res->resetting_device = 0;
862 res->sdev = NULL;
863 res->sata_port = NULL;
867 * ipr_handle_config_change - Handle a config change from the adapter
868 * @ioa_cfg: ioa config struct
869 * @hostrcb: hostrcb
871 * Return value:
872 * none
874 static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg,
875 struct ipr_hostrcb *hostrcb)
877 struct ipr_resource_entry *res = NULL;
878 struct ipr_config_table_entry *cfgte;
879 u32 is_ndn = 1;
881 cfgte = &hostrcb->hcam.u.ccn.cfgte;
883 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
884 if (!memcmp(&res->cfgte.res_addr, &cfgte->res_addr,
885 sizeof(cfgte->res_addr))) {
886 is_ndn = 0;
887 break;
891 if (is_ndn) {
892 if (list_empty(&ioa_cfg->free_res_q)) {
893 ipr_send_hcam(ioa_cfg,
894 IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE,
895 hostrcb);
896 return;
899 res = list_entry(ioa_cfg->free_res_q.next,
900 struct ipr_resource_entry, queue);
902 list_del(&res->queue);
903 ipr_init_res_entry(res);
904 list_add_tail(&res->queue, &ioa_cfg->used_res_q);
907 memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry));
909 if (hostrcb->hcam.notify_type == IPR_HOST_RCB_NOTIF_TYPE_REM_ENTRY) {
910 if (res->sdev) {
911 res->del_from_ml = 1;
912 res->cfgte.res_handle = IPR_INVALID_RES_HANDLE;
913 if (ioa_cfg->allow_ml_add_del)
914 schedule_work(&ioa_cfg->work_q);
915 } else
916 list_move_tail(&res->queue, &ioa_cfg->free_res_q);
917 } else if (!res->sdev) {
918 res->add_to_ml = 1;
919 if (ioa_cfg->allow_ml_add_del)
920 schedule_work(&ioa_cfg->work_q);
923 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
927 * ipr_process_ccn - Op done function for a CCN.
928 * @ipr_cmd: ipr command struct
930 * This function is the op done function for a configuration
931 * change notification host controlled async from the adapter.
933 * Return value:
934 * none
936 static void ipr_process_ccn(struct ipr_cmnd *ipr_cmd)
938 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
939 struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
940 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
942 list_del(&hostrcb->queue);
943 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
945 if (ioasc) {
946 if (ioasc != IPR_IOASC_IOA_WAS_RESET)
947 dev_err(&ioa_cfg->pdev->dev,
948 "Host RCB failed with IOASC: 0x%08X\n", ioasc);
950 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
951 } else {
952 ipr_handle_config_change(ioa_cfg, hostrcb);
957 * ipr_log_vpd - Log the passed VPD to the error log.
958 * @vpd: vendor/product id/sn struct
960 * Return value:
961 * none
963 static void ipr_log_vpd(struct ipr_vpd *vpd)
965 char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN
966 + IPR_SERIAL_NUM_LEN];
968 memcpy(buffer, vpd->vpids.vendor_id, IPR_VENDOR_ID_LEN);
969 memcpy(buffer + IPR_VENDOR_ID_LEN, vpd->vpids.product_id,
970 IPR_PROD_ID_LEN);
971 buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN] = '\0';
972 ipr_err("Vendor/Product ID: %s\n", buffer);
974 memcpy(buffer, vpd->sn, IPR_SERIAL_NUM_LEN);
975 buffer[IPR_SERIAL_NUM_LEN] = '\0';
976 ipr_err(" Serial Number: %s\n", buffer);
980 * ipr_log_ext_vpd - Log the passed extended VPD to the error log.
981 * @vpd: vendor/product id/sn/wwn struct
983 * Return value:
984 * none
986 static void ipr_log_ext_vpd(struct ipr_ext_vpd *vpd)
988 ipr_log_vpd(&vpd->vpd);
989 ipr_err(" WWN: %08X%08X\n", be32_to_cpu(vpd->wwid[0]),
990 be32_to_cpu(vpd->wwid[1]));
994 * ipr_log_enhanced_cache_error - Log a cache error.
995 * @ioa_cfg: ioa config struct
996 * @hostrcb: hostrcb struct
998 * Return value:
999 * none
1001 static void ipr_log_enhanced_cache_error(struct ipr_ioa_cfg *ioa_cfg,
1002 struct ipr_hostrcb *hostrcb)
1004 struct ipr_hostrcb_type_12_error *error =
1005 &hostrcb->hcam.u.error.u.type_12_error;
1007 ipr_err("-----Current Configuration-----\n");
1008 ipr_err("Cache Directory Card Information:\n");
1009 ipr_log_ext_vpd(&error->ioa_vpd);
1010 ipr_err("Adapter Card Information:\n");
1011 ipr_log_ext_vpd(&error->cfc_vpd);
1013 ipr_err("-----Expected Configuration-----\n");
1014 ipr_err("Cache Directory Card Information:\n");
1015 ipr_log_ext_vpd(&error->ioa_last_attached_to_cfc_vpd);
1016 ipr_err("Adapter Card Information:\n");
1017 ipr_log_ext_vpd(&error->cfc_last_attached_to_ioa_vpd);
1019 ipr_err("Additional IOA Data: %08X %08X %08X\n",
1020 be32_to_cpu(error->ioa_data[0]),
1021 be32_to_cpu(error->ioa_data[1]),
1022 be32_to_cpu(error->ioa_data[2]));
1026 * ipr_log_cache_error - Log a cache error.
1027 * @ioa_cfg: ioa config struct
1028 * @hostrcb: hostrcb struct
1030 * Return value:
1031 * none
1033 static void ipr_log_cache_error(struct ipr_ioa_cfg *ioa_cfg,
1034 struct ipr_hostrcb *hostrcb)
1036 struct ipr_hostrcb_type_02_error *error =
1037 &hostrcb->hcam.u.error.u.type_02_error;
1039 ipr_err("-----Current Configuration-----\n");
1040 ipr_err("Cache Directory Card Information:\n");
1041 ipr_log_vpd(&error->ioa_vpd);
1042 ipr_err("Adapter Card Information:\n");
1043 ipr_log_vpd(&error->cfc_vpd);
1045 ipr_err("-----Expected Configuration-----\n");
1046 ipr_err("Cache Directory Card Information:\n");
1047 ipr_log_vpd(&error->ioa_last_attached_to_cfc_vpd);
1048 ipr_err("Adapter Card Information:\n");
1049 ipr_log_vpd(&error->cfc_last_attached_to_ioa_vpd);
1051 ipr_err("Additional IOA Data: %08X %08X %08X\n",
1052 be32_to_cpu(error->ioa_data[0]),
1053 be32_to_cpu(error->ioa_data[1]),
1054 be32_to_cpu(error->ioa_data[2]));
1058 * ipr_log_enhanced_config_error - Log a configuration error.
1059 * @ioa_cfg: ioa config struct
1060 * @hostrcb: hostrcb struct
1062 * Return value:
1063 * none
1065 static void ipr_log_enhanced_config_error(struct ipr_ioa_cfg *ioa_cfg,
1066 struct ipr_hostrcb *hostrcb)
1068 int errors_logged, i;
1069 struct ipr_hostrcb_device_data_entry_enhanced *dev_entry;
1070 struct ipr_hostrcb_type_13_error *error;
1072 error = &hostrcb->hcam.u.error.u.type_13_error;
1073 errors_logged = be32_to_cpu(error->errors_logged);
1075 ipr_err("Device Errors Detected/Logged: %d/%d\n",
1076 be32_to_cpu(error->errors_detected), errors_logged);
1078 dev_entry = error->dev;
1080 for (i = 0; i < errors_logged; i++, dev_entry++) {
1081 ipr_err_separator;
1083 ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1);
1084 ipr_log_ext_vpd(&dev_entry->vpd);
1086 ipr_err("-----New Device Information-----\n");
1087 ipr_log_ext_vpd(&dev_entry->new_vpd);
1089 ipr_err("Cache Directory Card Information:\n");
1090 ipr_log_ext_vpd(&dev_entry->ioa_last_with_dev_vpd);
1092 ipr_err("Adapter Card Information:\n");
1093 ipr_log_ext_vpd(&dev_entry->cfc_last_with_dev_vpd);
1098 * ipr_log_config_error - Log a configuration error.
1099 * @ioa_cfg: ioa config struct
1100 * @hostrcb: hostrcb struct
1102 * Return value:
1103 * none
1105 static void ipr_log_config_error(struct ipr_ioa_cfg *ioa_cfg,
1106 struct ipr_hostrcb *hostrcb)
1108 int errors_logged, i;
1109 struct ipr_hostrcb_device_data_entry *dev_entry;
1110 struct ipr_hostrcb_type_03_error *error;
1112 error = &hostrcb->hcam.u.error.u.type_03_error;
1113 errors_logged = be32_to_cpu(error->errors_logged);
1115 ipr_err("Device Errors Detected/Logged: %d/%d\n",
1116 be32_to_cpu(error->errors_detected), errors_logged);
1118 dev_entry = error->dev;
1120 for (i = 0; i < errors_logged; i++, dev_entry++) {
1121 ipr_err_separator;
1123 ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1);
1124 ipr_log_vpd(&dev_entry->vpd);
1126 ipr_err("-----New Device Information-----\n");
1127 ipr_log_vpd(&dev_entry->new_vpd);
1129 ipr_err("Cache Directory Card Information:\n");
1130 ipr_log_vpd(&dev_entry->ioa_last_with_dev_vpd);
1132 ipr_err("Adapter Card Information:\n");
1133 ipr_log_vpd(&dev_entry->cfc_last_with_dev_vpd);
1135 ipr_err("Additional IOA Data: %08X %08X %08X %08X %08X\n",
1136 be32_to_cpu(dev_entry->ioa_data[0]),
1137 be32_to_cpu(dev_entry->ioa_data[1]),
1138 be32_to_cpu(dev_entry->ioa_data[2]),
1139 be32_to_cpu(dev_entry->ioa_data[3]),
1140 be32_to_cpu(dev_entry->ioa_data[4]));
1145 * ipr_log_enhanced_array_error - Log an array configuration error.
1146 * @ioa_cfg: ioa config struct
1147 * @hostrcb: hostrcb struct
1149 * Return value:
1150 * none
1152 static void ipr_log_enhanced_array_error(struct ipr_ioa_cfg *ioa_cfg,
1153 struct ipr_hostrcb *hostrcb)
1155 int i, num_entries;
1156 struct ipr_hostrcb_type_14_error *error;
1157 struct ipr_hostrcb_array_data_entry_enhanced *array_entry;
1158 const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' };
1160 error = &hostrcb->hcam.u.error.u.type_14_error;
1162 ipr_err_separator;
1164 ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n",
1165 error->protection_level,
1166 ioa_cfg->host->host_no,
1167 error->last_func_vset_res_addr.bus,
1168 error->last_func_vset_res_addr.target,
1169 error->last_func_vset_res_addr.lun);
1171 ipr_err_separator;
1173 array_entry = error->array_member;
1174 num_entries = min_t(u32, be32_to_cpu(error->num_entries),
1175 sizeof(error->array_member));
1177 for (i = 0; i < num_entries; i++, array_entry++) {
1178 if (!memcmp(array_entry->vpd.vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN))
1179 continue;
1181 if (be32_to_cpu(error->exposed_mode_adn) == i)
1182 ipr_err("Exposed Array Member %d:\n", i);
1183 else
1184 ipr_err("Array Member %d:\n", i);
1186 ipr_log_ext_vpd(&array_entry->vpd);
1187 ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location");
1188 ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr,
1189 "Expected Location");
1191 ipr_err_separator;
1196 * ipr_log_array_error - Log an array configuration error.
1197 * @ioa_cfg: ioa config struct
1198 * @hostrcb: hostrcb struct
1200 * Return value:
1201 * none
1203 static void ipr_log_array_error(struct ipr_ioa_cfg *ioa_cfg,
1204 struct ipr_hostrcb *hostrcb)
1206 int i;
1207 struct ipr_hostrcb_type_04_error *error;
1208 struct ipr_hostrcb_array_data_entry *array_entry;
1209 const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' };
1211 error = &hostrcb->hcam.u.error.u.type_04_error;
1213 ipr_err_separator;
1215 ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n",
1216 error->protection_level,
1217 ioa_cfg->host->host_no,
1218 error->last_func_vset_res_addr.bus,
1219 error->last_func_vset_res_addr.target,
1220 error->last_func_vset_res_addr.lun);
1222 ipr_err_separator;
1224 array_entry = error->array_member;
1226 for (i = 0; i < 18; i++) {
1227 if (!memcmp(array_entry->vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN))
1228 continue;
1230 if (be32_to_cpu(error->exposed_mode_adn) == i)
1231 ipr_err("Exposed Array Member %d:\n", i);
1232 else
1233 ipr_err("Array Member %d:\n", i);
1235 ipr_log_vpd(&array_entry->vpd);
1237 ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location");
1238 ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr,
1239 "Expected Location");
1241 ipr_err_separator;
1243 if (i == 9)
1244 array_entry = error->array_member2;
1245 else
1246 array_entry++;
1251 * ipr_log_hex_data - Log additional hex IOA error data.
1252 * @ioa_cfg: ioa config struct
1253 * @data: IOA error data
1254 * @len: data length
1256 * Return value:
1257 * none
1259 static void ipr_log_hex_data(struct ipr_ioa_cfg *ioa_cfg, u32 *data, int len)
1261 int i;
1263 if (len == 0)
1264 return;
1266 if (ioa_cfg->log_level <= IPR_DEFAULT_LOG_LEVEL)
1267 len = min_t(int, len, IPR_DEFAULT_MAX_ERROR_DUMP);
1269 for (i = 0; i < len / 4; i += 4) {
1270 ipr_err("%08X: %08X %08X %08X %08X\n", i*4,
1271 be32_to_cpu(data[i]),
1272 be32_to_cpu(data[i+1]),
1273 be32_to_cpu(data[i+2]),
1274 be32_to_cpu(data[i+3]));
1279 * ipr_log_enhanced_dual_ioa_error - Log an enhanced dual adapter error.
1280 * @ioa_cfg: ioa config struct
1281 * @hostrcb: hostrcb struct
1283 * Return value:
1284 * none
1286 static void ipr_log_enhanced_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg,
1287 struct ipr_hostrcb *hostrcb)
1289 struct ipr_hostrcb_type_17_error *error;
1291 error = &hostrcb->hcam.u.error.u.type_17_error;
1292 error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
1294 ipr_err("%s\n", error->failure_reason);
1295 ipr_err("Remote Adapter VPD:\n");
1296 ipr_log_ext_vpd(&error->vpd);
1297 ipr_log_hex_data(ioa_cfg, error->data,
1298 be32_to_cpu(hostrcb->hcam.length) -
1299 (offsetof(struct ipr_hostrcb_error, u) +
1300 offsetof(struct ipr_hostrcb_type_17_error, data)));
1304 * ipr_log_dual_ioa_error - Log a dual adapter error.
1305 * @ioa_cfg: ioa config struct
1306 * @hostrcb: hostrcb struct
1308 * Return value:
1309 * none
1311 static void ipr_log_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg,
1312 struct ipr_hostrcb *hostrcb)
1314 struct ipr_hostrcb_type_07_error *error;
1316 error = &hostrcb->hcam.u.error.u.type_07_error;
1317 error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
1319 ipr_err("%s\n", error->failure_reason);
1320 ipr_err("Remote Adapter VPD:\n");
1321 ipr_log_vpd(&error->vpd);
1322 ipr_log_hex_data(ioa_cfg, error->data,
1323 be32_to_cpu(hostrcb->hcam.length) -
1324 (offsetof(struct ipr_hostrcb_error, u) +
1325 offsetof(struct ipr_hostrcb_type_07_error, data)));
1328 static const struct {
1329 u8 active;
1330 char *desc;
1331 } path_active_desc[] = {
1332 { IPR_PATH_NO_INFO, "Path" },
1333 { IPR_PATH_ACTIVE, "Active path" },
1334 { IPR_PATH_NOT_ACTIVE, "Inactive path" }
1337 static const struct {
1338 u8 state;
1339 char *desc;
1340 } path_state_desc[] = {
1341 { IPR_PATH_STATE_NO_INFO, "has no path state information available" },
1342 { IPR_PATH_HEALTHY, "is healthy" },
1343 { IPR_PATH_DEGRADED, "is degraded" },
1344 { IPR_PATH_FAILED, "is failed" }
1348 * ipr_log_fabric_path - Log a fabric path error
1349 * @hostrcb: hostrcb struct
1350 * @fabric: fabric descriptor
1352 * Return value:
1353 * none
1355 static void ipr_log_fabric_path(struct ipr_hostrcb *hostrcb,
1356 struct ipr_hostrcb_fabric_desc *fabric)
1358 int i, j;
1359 u8 path_state = fabric->path_state;
1360 u8 active = path_state & IPR_PATH_ACTIVE_MASK;
1361 u8 state = path_state & IPR_PATH_STATE_MASK;
1363 for (i = 0; i < ARRAY_SIZE(path_active_desc); i++) {
1364 if (path_active_desc[i].active != active)
1365 continue;
1367 for (j = 0; j < ARRAY_SIZE(path_state_desc); j++) {
1368 if (path_state_desc[j].state != state)
1369 continue;
1371 if (fabric->cascaded_expander == 0xff && fabric->phy == 0xff) {
1372 ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d\n",
1373 path_active_desc[i].desc, path_state_desc[j].desc,
1374 fabric->ioa_port);
1375 } else if (fabric->cascaded_expander == 0xff) {
1376 ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Phy=%d\n",
1377 path_active_desc[i].desc, path_state_desc[j].desc,
1378 fabric->ioa_port, fabric->phy);
1379 } else if (fabric->phy == 0xff) {
1380 ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Cascade=%d\n",
1381 path_active_desc[i].desc, path_state_desc[j].desc,
1382 fabric->ioa_port, fabric->cascaded_expander);
1383 } else {
1384 ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Cascade=%d, Phy=%d\n",
1385 path_active_desc[i].desc, path_state_desc[j].desc,
1386 fabric->ioa_port, fabric->cascaded_expander, fabric->phy);
1388 return;
1392 ipr_err("Path state=%02X IOA Port=%d Cascade=%d Phy=%d\n", path_state,
1393 fabric->ioa_port, fabric->cascaded_expander, fabric->phy);
1396 static const struct {
1397 u8 type;
1398 char *desc;
1399 } path_type_desc[] = {
1400 { IPR_PATH_CFG_IOA_PORT, "IOA port" },
1401 { IPR_PATH_CFG_EXP_PORT, "Expander port" },
1402 { IPR_PATH_CFG_DEVICE_PORT, "Device port" },
1403 { IPR_PATH_CFG_DEVICE_LUN, "Device LUN" }
1406 static const struct {
1407 u8 status;
1408 char *desc;
1409 } path_status_desc[] = {
1410 { IPR_PATH_CFG_NO_PROB, "Functional" },
1411 { IPR_PATH_CFG_DEGRADED, "Degraded" },
1412 { IPR_PATH_CFG_FAILED, "Failed" },
1413 { IPR_PATH_CFG_SUSPECT, "Suspect" },
1414 { IPR_PATH_NOT_DETECTED, "Missing" },
1415 { IPR_PATH_INCORRECT_CONN, "Incorrectly connected" }
1418 static const char *link_rate[] = {
1419 "unknown",
1420 "disabled",
1421 "phy reset problem",
1422 "spinup hold",
1423 "port selector",
1424 "unknown",
1425 "unknown",
1426 "unknown",
1427 "1.5Gbps",
1428 "3.0Gbps",
1429 "unknown",
1430 "unknown",
1431 "unknown",
1432 "unknown",
1433 "unknown",
1434 "unknown"
1438 * ipr_log_path_elem - Log a fabric path element.
1439 * @hostrcb: hostrcb struct
1440 * @cfg: fabric path element struct
1442 * Return value:
1443 * none
1445 static void ipr_log_path_elem(struct ipr_hostrcb *hostrcb,
1446 struct ipr_hostrcb_config_element *cfg)
1448 int i, j;
1449 u8 type = cfg->type_status & IPR_PATH_CFG_TYPE_MASK;
1450 u8 status = cfg->type_status & IPR_PATH_CFG_STATUS_MASK;
1452 if (type == IPR_PATH_CFG_NOT_EXIST)
1453 return;
1455 for (i = 0; i < ARRAY_SIZE(path_type_desc); i++) {
1456 if (path_type_desc[i].type != type)
1457 continue;
1459 for (j = 0; j < ARRAY_SIZE(path_status_desc); j++) {
1460 if (path_status_desc[j].status != status)
1461 continue;
1463 if (type == IPR_PATH_CFG_IOA_PORT) {
1464 ipr_hcam_err(hostrcb, "%s %s: Phy=%d, Link rate=%s, WWN=%08X%08X\n",
1465 path_status_desc[j].desc, path_type_desc[i].desc,
1466 cfg->phy, link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
1467 be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
1468 } else {
1469 if (cfg->cascaded_expander == 0xff && cfg->phy == 0xff) {
1470 ipr_hcam_err(hostrcb, "%s %s: Link rate=%s, WWN=%08X%08X\n",
1471 path_status_desc[j].desc, path_type_desc[i].desc,
1472 link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
1473 be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
1474 } else if (cfg->cascaded_expander == 0xff) {
1475 ipr_hcam_err(hostrcb, "%s %s: Phy=%d, Link rate=%s, "
1476 "WWN=%08X%08X\n", path_status_desc[j].desc,
1477 path_type_desc[i].desc, cfg->phy,
1478 link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
1479 be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
1480 } else if (cfg->phy == 0xff) {
1481 ipr_hcam_err(hostrcb, "%s %s: Cascade=%d, Link rate=%s, "
1482 "WWN=%08X%08X\n", path_status_desc[j].desc,
1483 path_type_desc[i].desc, cfg->cascaded_expander,
1484 link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
1485 be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
1486 } else {
1487 ipr_hcam_err(hostrcb, "%s %s: Cascade=%d, Phy=%d, Link rate=%s "
1488 "WWN=%08X%08X\n", path_status_desc[j].desc,
1489 path_type_desc[i].desc, cfg->cascaded_expander, cfg->phy,
1490 link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
1491 be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
1494 return;
1498 ipr_hcam_err(hostrcb, "Path element=%02X: Cascade=%d Phy=%d Link rate=%s "
1499 "WWN=%08X%08X\n", cfg->type_status, cfg->cascaded_expander, cfg->phy,
1500 link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK],
1501 be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1]));
1505 * ipr_log_fabric_error - Log a fabric error.
1506 * @ioa_cfg: ioa config struct
1507 * @hostrcb: hostrcb struct
1509 * Return value:
1510 * none
1512 static void ipr_log_fabric_error(struct ipr_ioa_cfg *ioa_cfg,
1513 struct ipr_hostrcb *hostrcb)
1515 struct ipr_hostrcb_type_20_error *error;
1516 struct ipr_hostrcb_fabric_desc *fabric;
1517 struct ipr_hostrcb_config_element *cfg;
1518 int i, add_len;
1520 error = &hostrcb->hcam.u.error.u.type_20_error;
1521 error->failure_reason[sizeof(error->failure_reason) - 1] = '\0';
1522 ipr_hcam_err(hostrcb, "%s\n", error->failure_reason);
1524 add_len = be32_to_cpu(hostrcb->hcam.length) -
1525 (offsetof(struct ipr_hostrcb_error, u) +
1526 offsetof(struct ipr_hostrcb_type_20_error, desc));
1528 for (i = 0, fabric = error->desc; i < error->num_entries; i++) {
1529 ipr_log_fabric_path(hostrcb, fabric);
1530 for_each_fabric_cfg(fabric, cfg)
1531 ipr_log_path_elem(hostrcb, cfg);
1533 add_len -= be16_to_cpu(fabric->length);
1534 fabric = (struct ipr_hostrcb_fabric_desc *)
1535 ((unsigned long)fabric + be16_to_cpu(fabric->length));
1538 ipr_log_hex_data(ioa_cfg, (u32 *)fabric, add_len);
1542 * ipr_log_generic_error - Log an adapter error.
1543 * @ioa_cfg: ioa config struct
1544 * @hostrcb: hostrcb struct
1546 * Return value:
1547 * none
1549 static void ipr_log_generic_error(struct ipr_ioa_cfg *ioa_cfg,
1550 struct ipr_hostrcb *hostrcb)
1552 ipr_log_hex_data(ioa_cfg, hostrcb->hcam.u.raw.data,
1553 be32_to_cpu(hostrcb->hcam.length));
1557 * ipr_get_error - Find the specfied IOASC in the ipr_error_table.
1558 * @ioasc: IOASC
1560 * This function will return the index of into the ipr_error_table
1561 * for the specified IOASC. If the IOASC is not in the table,
1562 * 0 will be returned, which points to the entry used for unknown errors.
1564 * Return value:
1565 * index into the ipr_error_table
1567 static u32 ipr_get_error(u32 ioasc)
1569 int i;
1571 for (i = 0; i < ARRAY_SIZE(ipr_error_table); i++)
1572 if (ipr_error_table[i].ioasc == (ioasc & IPR_IOASC_IOASC_MASK))
1573 return i;
1575 return 0;
1579 * ipr_handle_log_data - Log an adapter error.
1580 * @ioa_cfg: ioa config struct
1581 * @hostrcb: hostrcb struct
1583 * This function logs an adapter error to the system.
1585 * Return value:
1586 * none
1588 static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg,
1589 struct ipr_hostrcb *hostrcb)
1591 u32 ioasc;
1592 int error_index;
1594 if (hostrcb->hcam.notify_type != IPR_HOST_RCB_NOTIF_TYPE_ERROR_LOG_ENTRY)
1595 return;
1597 if (hostrcb->hcam.notifications_lost == IPR_HOST_RCB_NOTIFICATIONS_LOST)
1598 dev_err(&ioa_cfg->pdev->dev, "Error notifications lost\n");
1600 ioasc = be32_to_cpu(hostrcb->hcam.u.error.failing_dev_ioasc);
1602 if (ioasc == IPR_IOASC_BUS_WAS_RESET ||
1603 ioasc == IPR_IOASC_BUS_WAS_RESET_BY_OTHER) {
1604 /* Tell the midlayer we had a bus reset so it will handle the UA properly */
1605 scsi_report_bus_reset(ioa_cfg->host,
1606 hostrcb->hcam.u.error.failing_dev_res_addr.bus);
1609 error_index = ipr_get_error(ioasc);
1611 if (!ipr_error_table[error_index].log_hcam)
1612 return;
1614 ipr_hcam_err(hostrcb, "%s\n", ipr_error_table[error_index].error);
1616 /* Set indication we have logged an error */
1617 ioa_cfg->errors_logged++;
1619 if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
1620 return;
1621 if (be32_to_cpu(hostrcb->hcam.length) > sizeof(hostrcb->hcam.u.raw))
1622 hostrcb->hcam.length = cpu_to_be32(sizeof(hostrcb->hcam.u.raw));
1624 switch (hostrcb->hcam.overlay_id) {
1625 case IPR_HOST_RCB_OVERLAY_ID_2:
1626 ipr_log_cache_error(ioa_cfg, hostrcb);
1627 break;
1628 case IPR_HOST_RCB_OVERLAY_ID_3:
1629 ipr_log_config_error(ioa_cfg, hostrcb);
1630 break;
1631 case IPR_HOST_RCB_OVERLAY_ID_4:
1632 case IPR_HOST_RCB_OVERLAY_ID_6:
1633 ipr_log_array_error(ioa_cfg, hostrcb);
1634 break;
1635 case IPR_HOST_RCB_OVERLAY_ID_7:
1636 ipr_log_dual_ioa_error(ioa_cfg, hostrcb);
1637 break;
1638 case IPR_HOST_RCB_OVERLAY_ID_12:
1639 ipr_log_enhanced_cache_error(ioa_cfg, hostrcb);
1640 break;
1641 case IPR_HOST_RCB_OVERLAY_ID_13:
1642 ipr_log_enhanced_config_error(ioa_cfg, hostrcb);
1643 break;
1644 case IPR_HOST_RCB_OVERLAY_ID_14:
1645 case IPR_HOST_RCB_OVERLAY_ID_16:
1646 ipr_log_enhanced_array_error(ioa_cfg, hostrcb);
1647 break;
1648 case IPR_HOST_RCB_OVERLAY_ID_17:
1649 ipr_log_enhanced_dual_ioa_error(ioa_cfg, hostrcb);
1650 break;
1651 case IPR_HOST_RCB_OVERLAY_ID_20:
1652 ipr_log_fabric_error(ioa_cfg, hostrcb);
1653 break;
1654 case IPR_HOST_RCB_OVERLAY_ID_1:
1655 case IPR_HOST_RCB_OVERLAY_ID_DEFAULT:
1656 default:
1657 ipr_log_generic_error(ioa_cfg, hostrcb);
1658 break;
1663 * ipr_process_error - Op done function for an adapter error log.
1664 * @ipr_cmd: ipr command struct
1666 * This function is the op done function for an error log host
1667 * controlled async from the adapter. It will log the error and
1668 * send the HCAM back to the adapter.
1670 * Return value:
1671 * none
1673 static void ipr_process_error(struct ipr_cmnd *ipr_cmd)
1675 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
1676 struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb;
1677 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
1679 list_del(&hostrcb->queue);
1680 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
1682 if (!ioasc) {
1683 ipr_handle_log_data(ioa_cfg, hostrcb);
1684 } else if (ioasc != IPR_IOASC_IOA_WAS_RESET) {
1685 dev_err(&ioa_cfg->pdev->dev,
1686 "Host RCB failed with IOASC: 0x%08X\n", ioasc);
1689 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb);
1693 * ipr_timeout - An internally generated op has timed out.
1694 * @ipr_cmd: ipr command struct
1696 * This function blocks host requests and initiates an
1697 * adapter reset.
1699 * Return value:
1700 * none
1702 static void ipr_timeout(struct ipr_cmnd *ipr_cmd)
1704 unsigned long lock_flags = 0;
1705 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
1707 ENTER;
1708 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1710 ioa_cfg->errors_logged++;
1711 dev_err(&ioa_cfg->pdev->dev,
1712 "Adapter being reset due to command timeout.\n");
1714 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
1715 ioa_cfg->sdt_state = GET_DUMP;
1717 if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd)
1718 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
1720 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1721 LEAVE;
1725 * ipr_oper_timeout - Adapter timed out transitioning to operational
1726 * @ipr_cmd: ipr command struct
1728 * This function blocks host requests and initiates an
1729 * adapter reset.
1731 * Return value:
1732 * none
1734 static void ipr_oper_timeout(struct ipr_cmnd *ipr_cmd)
1736 unsigned long lock_flags = 0;
1737 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
1739 ENTER;
1740 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
1742 ioa_cfg->errors_logged++;
1743 dev_err(&ioa_cfg->pdev->dev,
1744 "Adapter timed out transitioning to operational.\n");
1746 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
1747 ioa_cfg->sdt_state = GET_DUMP;
1749 if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) {
1750 if (ipr_fastfail)
1751 ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES;
1752 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
1755 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
1756 LEAVE;
1760 * ipr_reset_reload - Reset/Reload the IOA
1761 * @ioa_cfg: ioa config struct
1762 * @shutdown_type: shutdown type
1764 * This function resets the adapter and re-initializes it.
1765 * This function assumes that all new host commands have been stopped.
1766 * Return value:
1767 * SUCCESS / FAILED
1769 static int ipr_reset_reload(struct ipr_ioa_cfg *ioa_cfg,
1770 enum ipr_shutdown_type shutdown_type)
1772 if (!ioa_cfg->in_reset_reload)
1773 ipr_initiate_ioa_reset(ioa_cfg, shutdown_type);
1775 spin_unlock_irq(ioa_cfg->host->host_lock);
1776 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
1777 spin_lock_irq(ioa_cfg->host->host_lock);
1779 /* If we got hit with a host reset while we were already resetting
1780 the adapter for some reason, and the reset failed. */
1781 if (ioa_cfg->ioa_is_dead) {
1782 ipr_trace;
1783 return FAILED;
1786 return SUCCESS;
1790 * ipr_find_ses_entry - Find matching SES in SES table
1791 * @res: resource entry struct of SES
1793 * Return value:
1794 * pointer to SES table entry / NULL on failure
1796 static const struct ipr_ses_table_entry *
1797 ipr_find_ses_entry(struct ipr_resource_entry *res)
1799 int i, j, matches;
1800 const struct ipr_ses_table_entry *ste = ipr_ses_table;
1802 for (i = 0; i < ARRAY_SIZE(ipr_ses_table); i++, ste++) {
1803 for (j = 0, matches = 0; j < IPR_PROD_ID_LEN; j++) {
1804 if (ste->compare_product_id_byte[j] == 'X') {
1805 if (res->cfgte.std_inq_data.vpids.product_id[j] == ste->product_id[j])
1806 matches++;
1807 else
1808 break;
1809 } else
1810 matches++;
1813 if (matches == IPR_PROD_ID_LEN)
1814 return ste;
1817 return NULL;
1821 * ipr_get_max_scsi_speed - Determine max SCSI speed for a given bus
1822 * @ioa_cfg: ioa config struct
1823 * @bus: SCSI bus
1824 * @bus_width: bus width
1826 * Return value:
1827 * SCSI bus speed in units of 100KHz, 1600 is 160 MHz
1828 * For a 2-byte wide SCSI bus, the maximum transfer speed is
1829 * twice the maximum transfer rate (e.g. for a wide enabled bus,
1830 * max 160MHz = max 320MB/sec).
1832 static u32 ipr_get_max_scsi_speed(struct ipr_ioa_cfg *ioa_cfg, u8 bus, u8 bus_width)
1834 struct ipr_resource_entry *res;
1835 const struct ipr_ses_table_entry *ste;
1836 u32 max_xfer_rate = IPR_MAX_SCSI_RATE(bus_width);
1838 /* Loop through each config table entry in the config table buffer */
1839 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
1840 if (!(IPR_IS_SES_DEVICE(res->cfgte.std_inq_data)))
1841 continue;
1843 if (bus != res->cfgte.res_addr.bus)
1844 continue;
1846 if (!(ste = ipr_find_ses_entry(res)))
1847 continue;
1849 max_xfer_rate = (ste->max_bus_speed_limit * 10) / (bus_width / 8);
1852 return max_xfer_rate;
1856 * ipr_wait_iodbg_ack - Wait for an IODEBUG ACK from the IOA
1857 * @ioa_cfg: ioa config struct
1858 * @max_delay: max delay in micro-seconds to wait
1860 * Waits for an IODEBUG ACK from the IOA, doing busy looping.
1862 * Return value:
1863 * 0 on success / other on failure
1865 static int ipr_wait_iodbg_ack(struct ipr_ioa_cfg *ioa_cfg, int max_delay)
1867 volatile u32 pcii_reg;
1868 int delay = 1;
1870 /* Read interrupt reg until IOA signals IO Debug Acknowledge */
1871 while (delay < max_delay) {
1872 pcii_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
1874 if (pcii_reg & IPR_PCII_IO_DEBUG_ACKNOWLEDGE)
1875 return 0;
1877 /* udelay cannot be used if delay is more than a few milliseconds */
1878 if ((delay / 1000) > MAX_UDELAY_MS)
1879 mdelay(delay / 1000);
1880 else
1881 udelay(delay);
1883 delay += delay;
1885 return -EIO;
1889 * ipr_get_ldump_data_section - Dump IOA memory
1890 * @ioa_cfg: ioa config struct
1891 * @start_addr: adapter address to dump
1892 * @dest: destination kernel buffer
1893 * @length_in_words: length to dump in 4 byte words
1895 * Return value:
1896 * 0 on success / -EIO on failure
1898 static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg,
1899 u32 start_addr,
1900 __be32 *dest, u32 length_in_words)
1902 volatile u32 temp_pcii_reg;
1903 int i, delay = 0;
1905 /* Write IOA interrupt reg starting LDUMP state */
1906 writel((IPR_UPROCI_RESET_ALERT | IPR_UPROCI_IO_DEBUG_ALERT),
1907 ioa_cfg->regs.set_uproc_interrupt_reg);
1909 /* Wait for IO debug acknowledge */
1910 if (ipr_wait_iodbg_ack(ioa_cfg,
1911 IPR_LDUMP_MAX_LONG_ACK_DELAY_IN_USEC)) {
1912 dev_err(&ioa_cfg->pdev->dev,
1913 "IOA dump long data transfer timeout\n");
1914 return -EIO;
1917 /* Signal LDUMP interlocked - clear IO debug ack */
1918 writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
1919 ioa_cfg->regs.clr_interrupt_reg);
1921 /* Write Mailbox with starting address */
1922 writel(start_addr, ioa_cfg->ioa_mailbox);
1924 /* Signal address valid - clear IOA Reset alert */
1925 writel(IPR_UPROCI_RESET_ALERT,
1926 ioa_cfg->regs.clr_uproc_interrupt_reg);
1928 for (i = 0; i < length_in_words; i++) {
1929 /* Wait for IO debug acknowledge */
1930 if (ipr_wait_iodbg_ack(ioa_cfg,
1931 IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC)) {
1932 dev_err(&ioa_cfg->pdev->dev,
1933 "IOA dump short data transfer timeout\n");
1934 return -EIO;
1937 /* Read data from mailbox and increment destination pointer */
1938 *dest = cpu_to_be32(readl(ioa_cfg->ioa_mailbox));
1939 dest++;
1941 /* For all but the last word of data, signal data received */
1942 if (i < (length_in_words - 1)) {
1943 /* Signal dump data received - Clear IO debug Ack */
1944 writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
1945 ioa_cfg->regs.clr_interrupt_reg);
1949 /* Signal end of block transfer. Set reset alert then clear IO debug ack */
1950 writel(IPR_UPROCI_RESET_ALERT,
1951 ioa_cfg->regs.set_uproc_interrupt_reg);
1953 writel(IPR_UPROCI_IO_DEBUG_ALERT,
1954 ioa_cfg->regs.clr_uproc_interrupt_reg);
1956 /* Signal dump data received - Clear IO debug Ack */
1957 writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE,
1958 ioa_cfg->regs.clr_interrupt_reg);
1960 /* Wait for IOA to signal LDUMP exit - IOA reset alert will be cleared */
1961 while (delay < IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC) {
1962 temp_pcii_reg =
1963 readl(ioa_cfg->regs.sense_uproc_interrupt_reg);
1965 if (!(temp_pcii_reg & IPR_UPROCI_RESET_ALERT))
1966 return 0;
1968 udelay(10);
1969 delay += 10;
1972 return 0;
1975 #ifdef CONFIG_SCSI_IPR_DUMP
1977 * ipr_sdt_copy - Copy Smart Dump Table to kernel buffer
1978 * @ioa_cfg: ioa config struct
1979 * @pci_address: adapter address
1980 * @length: length of data to copy
1982 * Copy data from PCI adapter to kernel buffer.
1983 * Note: length MUST be a 4 byte multiple
1984 * Return value:
1985 * 0 on success / other on failure
1987 static int ipr_sdt_copy(struct ipr_ioa_cfg *ioa_cfg,
1988 unsigned long pci_address, u32 length)
1990 int bytes_copied = 0;
1991 int cur_len, rc, rem_len, rem_page_len;
1992 __be32 *page;
1993 unsigned long lock_flags = 0;
1994 struct ipr_ioa_dump *ioa_dump = &ioa_cfg->dump->ioa_dump;
1996 while (bytes_copied < length &&
1997 (ioa_dump->hdr.len + bytes_copied) < IPR_MAX_IOA_DUMP_SIZE) {
1998 if (ioa_dump->page_offset >= PAGE_SIZE ||
1999 ioa_dump->page_offset == 0) {
2000 page = (__be32 *)__get_free_page(GFP_ATOMIC);
2002 if (!page) {
2003 ipr_trace;
2004 return bytes_copied;
2007 ioa_dump->page_offset = 0;
2008 ioa_dump->ioa_data[ioa_dump->next_page_index] = page;
2009 ioa_dump->next_page_index++;
2010 } else
2011 page = ioa_dump->ioa_data[ioa_dump->next_page_index - 1];
2013 rem_len = length - bytes_copied;
2014 rem_page_len = PAGE_SIZE - ioa_dump->page_offset;
2015 cur_len = min(rem_len, rem_page_len);
2017 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2018 if (ioa_cfg->sdt_state == ABORT_DUMP) {
2019 rc = -EIO;
2020 } else {
2021 rc = ipr_get_ldump_data_section(ioa_cfg,
2022 pci_address + bytes_copied,
2023 &page[ioa_dump->page_offset / 4],
2024 (cur_len / sizeof(u32)));
2026 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2028 if (!rc) {
2029 ioa_dump->page_offset += cur_len;
2030 bytes_copied += cur_len;
2031 } else {
2032 ipr_trace;
2033 break;
2035 schedule();
2038 return bytes_copied;
2042 * ipr_init_dump_entry_hdr - Initialize a dump entry header.
2043 * @hdr: dump entry header struct
2045 * Return value:
2046 * nothing
2048 static void ipr_init_dump_entry_hdr(struct ipr_dump_entry_header *hdr)
2050 hdr->eye_catcher = IPR_DUMP_EYE_CATCHER;
2051 hdr->num_elems = 1;
2052 hdr->offset = sizeof(*hdr);
2053 hdr->status = IPR_DUMP_STATUS_SUCCESS;
2057 * ipr_dump_ioa_type_data - Fill in the adapter type in the dump.
2058 * @ioa_cfg: ioa config struct
2059 * @driver_dump: driver dump struct
2061 * Return value:
2062 * nothing
2064 static void ipr_dump_ioa_type_data(struct ipr_ioa_cfg *ioa_cfg,
2065 struct ipr_driver_dump *driver_dump)
2067 struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
2069 ipr_init_dump_entry_hdr(&driver_dump->ioa_type_entry.hdr);
2070 driver_dump->ioa_type_entry.hdr.len =
2071 sizeof(struct ipr_dump_ioa_type_entry) -
2072 sizeof(struct ipr_dump_entry_header);
2073 driver_dump->ioa_type_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
2074 driver_dump->ioa_type_entry.hdr.id = IPR_DUMP_DRIVER_TYPE_ID;
2075 driver_dump->ioa_type_entry.type = ioa_cfg->type;
2076 driver_dump->ioa_type_entry.fw_version = (ucode_vpd->major_release << 24) |
2077 (ucode_vpd->card_type << 16) | (ucode_vpd->minor_release[0] << 8) |
2078 ucode_vpd->minor_release[1];
2079 driver_dump->hdr.num_entries++;
2083 * ipr_dump_version_data - Fill in the driver version in the dump.
2084 * @ioa_cfg: ioa config struct
2085 * @driver_dump: driver dump struct
2087 * Return value:
2088 * nothing
2090 static void ipr_dump_version_data(struct ipr_ioa_cfg *ioa_cfg,
2091 struct ipr_driver_dump *driver_dump)
2093 ipr_init_dump_entry_hdr(&driver_dump->version_entry.hdr);
2094 driver_dump->version_entry.hdr.len =
2095 sizeof(struct ipr_dump_version_entry) -
2096 sizeof(struct ipr_dump_entry_header);
2097 driver_dump->version_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII;
2098 driver_dump->version_entry.hdr.id = IPR_DUMP_DRIVER_VERSION_ID;
2099 strcpy(driver_dump->version_entry.version, IPR_DRIVER_VERSION);
2100 driver_dump->hdr.num_entries++;
2104 * ipr_dump_trace_data - Fill in the IOA trace in the dump.
2105 * @ioa_cfg: ioa config struct
2106 * @driver_dump: driver dump struct
2108 * Return value:
2109 * nothing
2111 static void ipr_dump_trace_data(struct ipr_ioa_cfg *ioa_cfg,
2112 struct ipr_driver_dump *driver_dump)
2114 ipr_init_dump_entry_hdr(&driver_dump->trace_entry.hdr);
2115 driver_dump->trace_entry.hdr.len =
2116 sizeof(struct ipr_dump_trace_entry) -
2117 sizeof(struct ipr_dump_entry_header);
2118 driver_dump->trace_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
2119 driver_dump->trace_entry.hdr.id = IPR_DUMP_TRACE_ID;
2120 memcpy(driver_dump->trace_entry.trace, ioa_cfg->trace, IPR_TRACE_SIZE);
2121 driver_dump->hdr.num_entries++;
2125 * ipr_dump_location_data - Fill in the IOA location in the dump.
2126 * @ioa_cfg: ioa config struct
2127 * @driver_dump: driver dump struct
2129 * Return value:
2130 * nothing
2132 static void ipr_dump_location_data(struct ipr_ioa_cfg *ioa_cfg,
2133 struct ipr_driver_dump *driver_dump)
2135 ipr_init_dump_entry_hdr(&driver_dump->location_entry.hdr);
2136 driver_dump->location_entry.hdr.len =
2137 sizeof(struct ipr_dump_location_entry) -
2138 sizeof(struct ipr_dump_entry_header);
2139 driver_dump->location_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII;
2140 driver_dump->location_entry.hdr.id = IPR_DUMP_LOCATION_ID;
2141 strcpy(driver_dump->location_entry.location, ioa_cfg->pdev->dev.bus_id);
2142 driver_dump->hdr.num_entries++;
2146 * ipr_get_ioa_dump - Perform a dump of the driver and adapter.
2147 * @ioa_cfg: ioa config struct
2148 * @dump: dump struct
2150 * Return value:
2151 * nothing
2153 static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
2155 unsigned long start_addr, sdt_word;
2156 unsigned long lock_flags = 0;
2157 struct ipr_driver_dump *driver_dump = &dump->driver_dump;
2158 struct ipr_ioa_dump *ioa_dump = &dump->ioa_dump;
2159 u32 num_entries, start_off, end_off;
2160 u32 bytes_to_copy, bytes_copied, rc;
2161 struct ipr_sdt *sdt;
2162 int i;
2164 ENTER;
2166 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2168 if (ioa_cfg->sdt_state != GET_DUMP) {
2169 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2170 return;
2173 start_addr = readl(ioa_cfg->ioa_mailbox);
2175 if (!ipr_sdt_is_fmt2(start_addr)) {
2176 dev_err(&ioa_cfg->pdev->dev,
2177 "Invalid dump table format: %lx\n", start_addr);
2178 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2179 return;
2182 dev_err(&ioa_cfg->pdev->dev, "Dump of IOA initiated\n");
2184 driver_dump->hdr.eye_catcher = IPR_DUMP_EYE_CATCHER;
2186 /* Initialize the overall dump header */
2187 driver_dump->hdr.len = sizeof(struct ipr_driver_dump);
2188 driver_dump->hdr.num_entries = 1;
2189 driver_dump->hdr.first_entry_offset = sizeof(struct ipr_dump_header);
2190 driver_dump->hdr.status = IPR_DUMP_STATUS_SUCCESS;
2191 driver_dump->hdr.os = IPR_DUMP_OS_LINUX;
2192 driver_dump->hdr.driver_name = IPR_DUMP_DRIVER_NAME;
2194 ipr_dump_version_data(ioa_cfg, driver_dump);
2195 ipr_dump_location_data(ioa_cfg, driver_dump);
2196 ipr_dump_ioa_type_data(ioa_cfg, driver_dump);
2197 ipr_dump_trace_data(ioa_cfg, driver_dump);
2199 /* Update dump_header */
2200 driver_dump->hdr.len += sizeof(struct ipr_dump_entry_header);
2202 /* IOA Dump entry */
2203 ipr_init_dump_entry_hdr(&ioa_dump->hdr);
2204 ioa_dump->format = IPR_SDT_FMT2;
2205 ioa_dump->hdr.len = 0;
2206 ioa_dump->hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY;
2207 ioa_dump->hdr.id = IPR_DUMP_IOA_DUMP_ID;
2209 /* First entries in sdt are actually a list of dump addresses and
2210 lengths to gather the real dump data. sdt represents the pointer
2211 to the ioa generated dump table. Dump data will be extracted based
2212 on entries in this table */
2213 sdt = &ioa_dump->sdt;
2215 rc = ipr_get_ldump_data_section(ioa_cfg, start_addr, (__be32 *)sdt,
2216 sizeof(struct ipr_sdt) / sizeof(__be32));
2218 /* Smart Dump table is ready to use and the first entry is valid */
2219 if (rc || (be32_to_cpu(sdt->hdr.state) != IPR_FMT2_SDT_READY_TO_USE)) {
2220 dev_err(&ioa_cfg->pdev->dev,
2221 "Dump of IOA failed. Dump table not valid: %d, %X.\n",
2222 rc, be32_to_cpu(sdt->hdr.state));
2223 driver_dump->hdr.status = IPR_DUMP_STATUS_FAILED;
2224 ioa_cfg->sdt_state = DUMP_OBTAINED;
2225 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2226 return;
2229 num_entries = be32_to_cpu(sdt->hdr.num_entries_used);
2231 if (num_entries > IPR_NUM_SDT_ENTRIES)
2232 num_entries = IPR_NUM_SDT_ENTRIES;
2234 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2236 for (i = 0; i < num_entries; i++) {
2237 if (ioa_dump->hdr.len > IPR_MAX_IOA_DUMP_SIZE) {
2238 driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
2239 break;
2242 if (sdt->entry[i].flags & IPR_SDT_VALID_ENTRY) {
2243 sdt_word = be32_to_cpu(sdt->entry[i].bar_str_offset);
2244 start_off = sdt_word & IPR_FMT2_MBX_ADDR_MASK;
2245 end_off = be32_to_cpu(sdt->entry[i].end_offset);
2247 if (ipr_sdt_is_fmt2(sdt_word) && sdt_word) {
2248 bytes_to_copy = end_off - start_off;
2249 if (bytes_to_copy > IPR_MAX_IOA_DUMP_SIZE) {
2250 sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY;
2251 continue;
2254 /* Copy data from adapter to driver buffers */
2255 bytes_copied = ipr_sdt_copy(ioa_cfg, sdt_word,
2256 bytes_to_copy);
2258 ioa_dump->hdr.len += bytes_copied;
2260 if (bytes_copied != bytes_to_copy) {
2261 driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS;
2262 break;
2268 dev_err(&ioa_cfg->pdev->dev, "Dump of IOA completed.\n");
2270 /* Update dump_header */
2271 driver_dump->hdr.len += ioa_dump->hdr.len;
2272 wmb();
2273 ioa_cfg->sdt_state = DUMP_OBTAINED;
2274 LEAVE;
2277 #else
2278 #define ipr_get_ioa_dump(ioa_cfg, dump) do { } while(0)
2279 #endif
2282 * ipr_release_dump - Free adapter dump memory
2283 * @kref: kref struct
2285 * Return value:
2286 * nothing
2288 static void ipr_release_dump(struct kref *kref)
2290 struct ipr_dump *dump = container_of(kref,struct ipr_dump,kref);
2291 struct ipr_ioa_cfg *ioa_cfg = dump->ioa_cfg;
2292 unsigned long lock_flags = 0;
2293 int i;
2295 ENTER;
2296 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2297 ioa_cfg->dump = NULL;
2298 ioa_cfg->sdt_state = INACTIVE;
2299 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2301 for (i = 0; i < dump->ioa_dump.next_page_index; i++)
2302 free_page((unsigned long) dump->ioa_dump.ioa_data[i]);
2304 kfree(dump);
2305 LEAVE;
2309 * ipr_worker_thread - Worker thread
2310 * @data: ioa config struct
2312 * Called at task level from a work thread. This function takes care
2313 * of adding and removing device from the mid-layer as configuration
2314 * changes are detected by the adapter.
2316 * Return value:
2317 * nothing
2319 static void ipr_worker_thread(void *data)
2321 unsigned long lock_flags;
2322 struct ipr_resource_entry *res;
2323 struct scsi_device *sdev;
2324 struct ipr_dump *dump;
2325 struct ipr_ioa_cfg *ioa_cfg = data;
2326 u8 bus, target, lun;
2327 int did_work;
2329 ENTER;
2330 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2332 if (ioa_cfg->sdt_state == GET_DUMP) {
2333 dump = ioa_cfg->dump;
2334 if (!dump) {
2335 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2336 return;
2338 kref_get(&dump->kref);
2339 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2340 ipr_get_ioa_dump(ioa_cfg, dump);
2341 kref_put(&dump->kref, ipr_release_dump);
2343 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2344 if (ioa_cfg->sdt_state == DUMP_OBTAINED)
2345 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
2346 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2347 return;
2350 restart:
2351 do {
2352 did_work = 0;
2353 if (!ioa_cfg->allow_cmds || !ioa_cfg->allow_ml_add_del) {
2354 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2355 return;
2358 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
2359 if (res->del_from_ml && res->sdev) {
2360 did_work = 1;
2361 sdev = res->sdev;
2362 if (!scsi_device_get(sdev)) {
2363 list_move_tail(&res->queue, &ioa_cfg->free_res_q);
2364 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2365 scsi_remove_device(sdev);
2366 scsi_device_put(sdev);
2367 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2369 break;
2372 } while(did_work);
2374 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
2375 if (res->add_to_ml) {
2376 bus = res->cfgte.res_addr.bus;
2377 target = res->cfgte.res_addr.target;
2378 lun = res->cfgte.res_addr.lun;
2379 res->add_to_ml = 0;
2380 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2381 scsi_add_device(ioa_cfg->host, bus, target, lun);
2382 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2383 goto restart;
2387 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2388 kobject_uevent(&ioa_cfg->host->shost_classdev.kobj, KOBJ_CHANGE);
2389 LEAVE;
2392 #ifdef CONFIG_SCSI_IPR_TRACE
2394 * ipr_read_trace - Dump the adapter trace
2395 * @kobj: kobject struct
2396 * @buf: buffer
2397 * @off: offset
2398 * @count: buffer size
2400 * Return value:
2401 * number of bytes printed to buffer
2403 static ssize_t ipr_read_trace(struct kobject *kobj, char *buf,
2404 loff_t off, size_t count)
2406 struct class_device *cdev = container_of(kobj,struct class_device,kobj);
2407 struct Scsi_Host *shost = class_to_shost(cdev);
2408 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2409 unsigned long lock_flags = 0;
2410 int size = IPR_TRACE_SIZE;
2411 char *src = (char *)ioa_cfg->trace;
2413 if (off > size)
2414 return 0;
2415 if (off + count > size) {
2416 size -= off;
2417 count = size;
2420 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2421 memcpy(buf, &src[off], count);
2422 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2423 return count;
2426 static struct bin_attribute ipr_trace_attr = {
2427 .attr = {
2428 .name = "trace",
2429 .mode = S_IRUGO,
2431 .size = 0,
2432 .read = ipr_read_trace,
2434 #endif
2436 static const struct {
2437 enum ipr_cache_state state;
2438 char *name;
2439 } cache_state [] = {
2440 { CACHE_NONE, "none" },
2441 { CACHE_DISABLED, "disabled" },
2442 { CACHE_ENABLED, "enabled" }
2446 * ipr_show_write_caching - Show the write caching attribute
2447 * @class_dev: class device struct
2448 * @buf: buffer
2450 * Return value:
2451 * number of bytes printed to buffer
2453 static ssize_t ipr_show_write_caching(struct class_device *class_dev, char *buf)
2455 struct Scsi_Host *shost = class_to_shost(class_dev);
2456 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2457 unsigned long lock_flags = 0;
2458 int i, len = 0;
2460 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2461 for (i = 0; i < ARRAY_SIZE(cache_state); i++) {
2462 if (cache_state[i].state == ioa_cfg->cache_state) {
2463 len = snprintf(buf, PAGE_SIZE, "%s\n", cache_state[i].name);
2464 break;
2467 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2468 return len;
2473 * ipr_store_write_caching - Enable/disable adapter write cache
2474 * @class_dev: class_device struct
2475 * @buf: buffer
2476 * @count: buffer size
2478 * This function will enable/disable adapter write cache.
2480 * Return value:
2481 * count on success / other on failure
2483 static ssize_t ipr_store_write_caching(struct class_device *class_dev,
2484 const char *buf, size_t count)
2486 struct Scsi_Host *shost = class_to_shost(class_dev);
2487 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2488 unsigned long lock_flags = 0;
2489 enum ipr_cache_state new_state = CACHE_INVALID;
2490 int i;
2492 if (!capable(CAP_SYS_ADMIN))
2493 return -EACCES;
2494 if (ioa_cfg->cache_state == CACHE_NONE)
2495 return -EINVAL;
2497 for (i = 0; i < ARRAY_SIZE(cache_state); i++) {
2498 if (!strncmp(cache_state[i].name, buf, strlen(cache_state[i].name))) {
2499 new_state = cache_state[i].state;
2500 break;
2504 if (new_state != CACHE_DISABLED && new_state != CACHE_ENABLED)
2505 return -EINVAL;
2507 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2508 if (ioa_cfg->cache_state == new_state) {
2509 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2510 return count;
2513 ioa_cfg->cache_state = new_state;
2514 dev_info(&ioa_cfg->pdev->dev, "%s adapter write cache.\n",
2515 new_state == CACHE_ENABLED ? "Enabling" : "Disabling");
2516 if (!ioa_cfg->in_reset_reload)
2517 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2518 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2519 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2521 return count;
2524 static struct class_device_attribute ipr_ioa_cache_attr = {
2525 .attr = {
2526 .name = "write_cache",
2527 .mode = S_IRUGO | S_IWUSR,
2529 .show = ipr_show_write_caching,
2530 .store = ipr_store_write_caching
2534 * ipr_show_fw_version - Show the firmware version
2535 * @class_dev: class device struct
2536 * @buf: buffer
2538 * Return value:
2539 * number of bytes printed to buffer
2541 static ssize_t ipr_show_fw_version(struct class_device *class_dev, char *buf)
2543 struct Scsi_Host *shost = class_to_shost(class_dev);
2544 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2545 struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
2546 unsigned long lock_flags = 0;
2547 int len;
2549 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2550 len = snprintf(buf, PAGE_SIZE, "%02X%02X%02X%02X\n",
2551 ucode_vpd->major_release, ucode_vpd->card_type,
2552 ucode_vpd->minor_release[0],
2553 ucode_vpd->minor_release[1]);
2554 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2555 return len;
2558 static struct class_device_attribute ipr_fw_version_attr = {
2559 .attr = {
2560 .name = "fw_version",
2561 .mode = S_IRUGO,
2563 .show = ipr_show_fw_version,
2567 * ipr_show_log_level - Show the adapter's error logging level
2568 * @class_dev: class device struct
2569 * @buf: buffer
2571 * Return value:
2572 * number of bytes printed to buffer
2574 static ssize_t ipr_show_log_level(struct class_device *class_dev, char *buf)
2576 struct Scsi_Host *shost = class_to_shost(class_dev);
2577 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2578 unsigned long lock_flags = 0;
2579 int len;
2581 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2582 len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->log_level);
2583 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2584 return len;
2588 * ipr_store_log_level - Change the adapter's error logging level
2589 * @class_dev: class device struct
2590 * @buf: buffer
2592 * Return value:
2593 * number of bytes printed to buffer
2595 static ssize_t ipr_store_log_level(struct class_device *class_dev,
2596 const char *buf, size_t count)
2598 struct Scsi_Host *shost = class_to_shost(class_dev);
2599 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2600 unsigned long lock_flags = 0;
2602 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2603 ioa_cfg->log_level = simple_strtoul(buf, NULL, 10);
2604 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2605 return strlen(buf);
2608 static struct class_device_attribute ipr_log_level_attr = {
2609 .attr = {
2610 .name = "log_level",
2611 .mode = S_IRUGO | S_IWUSR,
2613 .show = ipr_show_log_level,
2614 .store = ipr_store_log_level
2618 * ipr_store_diagnostics - IOA Diagnostics interface
2619 * @class_dev: class_device struct
2620 * @buf: buffer
2621 * @count: buffer size
2623 * This function will reset the adapter and wait a reasonable
2624 * amount of time for any errors that the adapter might log.
2626 * Return value:
2627 * count on success / other on failure
2629 static ssize_t ipr_store_diagnostics(struct class_device *class_dev,
2630 const char *buf, size_t count)
2632 struct Scsi_Host *shost = class_to_shost(class_dev);
2633 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2634 unsigned long lock_flags = 0;
2635 int rc = count;
2637 if (!capable(CAP_SYS_ADMIN))
2638 return -EACCES;
2640 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2641 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2642 ioa_cfg->errors_logged = 0;
2643 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2645 if (ioa_cfg->in_reset_reload) {
2646 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2647 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2649 /* Wait for a second for any errors to be logged */
2650 msleep(1000);
2651 } else {
2652 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2653 return -EIO;
2656 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2657 if (ioa_cfg->in_reset_reload || ioa_cfg->errors_logged)
2658 rc = -EIO;
2659 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2661 return rc;
2664 static struct class_device_attribute ipr_diagnostics_attr = {
2665 .attr = {
2666 .name = "run_diagnostics",
2667 .mode = S_IWUSR,
2669 .store = ipr_store_diagnostics
2673 * ipr_show_adapter_state - Show the adapter's state
2674 * @class_dev: class device struct
2675 * @buf: buffer
2677 * Return value:
2678 * number of bytes printed to buffer
2680 static ssize_t ipr_show_adapter_state(struct class_device *class_dev, char *buf)
2682 struct Scsi_Host *shost = class_to_shost(class_dev);
2683 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2684 unsigned long lock_flags = 0;
2685 int len;
2687 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2688 if (ioa_cfg->ioa_is_dead)
2689 len = snprintf(buf, PAGE_SIZE, "offline\n");
2690 else
2691 len = snprintf(buf, PAGE_SIZE, "online\n");
2692 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2693 return len;
2697 * ipr_store_adapter_state - Change adapter state
2698 * @class_dev: class_device struct
2699 * @buf: buffer
2700 * @count: buffer size
2702 * This function will change the adapter's state.
2704 * Return value:
2705 * count on success / other on failure
2707 static ssize_t ipr_store_adapter_state(struct class_device *class_dev,
2708 const char *buf, size_t count)
2710 struct Scsi_Host *shost = class_to_shost(class_dev);
2711 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2712 unsigned long lock_flags;
2713 int result = count;
2715 if (!capable(CAP_SYS_ADMIN))
2716 return -EACCES;
2718 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2719 if (ioa_cfg->ioa_is_dead && !strncmp(buf, "online", 6)) {
2720 ioa_cfg->ioa_is_dead = 0;
2721 ioa_cfg->reset_retries = 0;
2722 ioa_cfg->in_ioa_bringdown = 0;
2723 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
2725 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2726 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2728 return result;
2731 static struct class_device_attribute ipr_ioa_state_attr = {
2732 .attr = {
2733 .name = "state",
2734 .mode = S_IRUGO | S_IWUSR,
2736 .show = ipr_show_adapter_state,
2737 .store = ipr_store_adapter_state
2741 * ipr_store_reset_adapter - Reset the adapter
2742 * @class_dev: class_device struct
2743 * @buf: buffer
2744 * @count: buffer size
2746 * This function will reset the adapter.
2748 * Return value:
2749 * count on success / other on failure
2751 static ssize_t ipr_store_reset_adapter(struct class_device *class_dev,
2752 const char *buf, size_t count)
2754 struct Scsi_Host *shost = class_to_shost(class_dev);
2755 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
2756 unsigned long lock_flags;
2757 int result = count;
2759 if (!capable(CAP_SYS_ADMIN))
2760 return -EACCES;
2762 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2763 if (!ioa_cfg->in_reset_reload)
2764 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2765 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2766 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2768 return result;
2771 static struct class_device_attribute ipr_ioa_reset_attr = {
2772 .attr = {
2773 .name = "reset_host",
2774 .mode = S_IWUSR,
2776 .store = ipr_store_reset_adapter
2780 * ipr_alloc_ucode_buffer - Allocates a microcode download buffer
2781 * @buf_len: buffer length
2783 * Allocates a DMA'able buffer in chunks and assembles a scatter/gather
2784 * list to use for microcode download
2786 * Return value:
2787 * pointer to sglist / NULL on failure
2789 static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len)
2791 int sg_size, order, bsize_elem, num_elem, i, j;
2792 struct ipr_sglist *sglist;
2793 struct scatterlist *scatterlist;
2794 struct page *page;
2796 /* Get the minimum size per scatter/gather element */
2797 sg_size = buf_len / (IPR_MAX_SGLIST - 1);
2799 /* Get the actual size per element */
2800 order = get_order(sg_size);
2802 /* Determine the actual number of bytes per element */
2803 bsize_elem = PAGE_SIZE * (1 << order);
2805 /* Determine the actual number of sg entries needed */
2806 if (buf_len % bsize_elem)
2807 num_elem = (buf_len / bsize_elem) + 1;
2808 else
2809 num_elem = buf_len / bsize_elem;
2811 /* Allocate a scatter/gather list for the DMA */
2812 sglist = kzalloc(sizeof(struct ipr_sglist) +
2813 (sizeof(struct scatterlist) * (num_elem - 1)),
2814 GFP_KERNEL);
2816 if (sglist == NULL) {
2817 ipr_trace;
2818 return NULL;
2821 scatterlist = sglist->scatterlist;
2823 sglist->order = order;
2824 sglist->num_sg = num_elem;
2826 /* Allocate a bunch of sg elements */
2827 for (i = 0; i < num_elem; i++) {
2828 page = alloc_pages(GFP_KERNEL, order);
2829 if (!page) {
2830 ipr_trace;
2832 /* Free up what we already allocated */
2833 for (j = i - 1; j >= 0; j--)
2834 __free_pages(scatterlist[j].page, order);
2835 kfree(sglist);
2836 return NULL;
2839 scatterlist[i].page = page;
2842 return sglist;
2846 * ipr_free_ucode_buffer - Frees a microcode download buffer
2847 * @p_dnld: scatter/gather list pointer
2849 * Free a DMA'able ucode download buffer previously allocated with
2850 * ipr_alloc_ucode_buffer
2852 * Return value:
2853 * nothing
2855 static void ipr_free_ucode_buffer(struct ipr_sglist *sglist)
2857 int i;
2859 for (i = 0; i < sglist->num_sg; i++)
2860 __free_pages(sglist->scatterlist[i].page, sglist->order);
2862 kfree(sglist);
2866 * ipr_copy_ucode_buffer - Copy user buffer to kernel buffer
2867 * @sglist: scatter/gather list pointer
2868 * @buffer: buffer pointer
2869 * @len: buffer length
2871 * Copy a microcode image from a user buffer into a buffer allocated by
2872 * ipr_alloc_ucode_buffer
2874 * Return value:
2875 * 0 on success / other on failure
2877 static int ipr_copy_ucode_buffer(struct ipr_sglist *sglist,
2878 u8 *buffer, u32 len)
2880 int bsize_elem, i, result = 0;
2881 struct scatterlist *scatterlist;
2882 void *kaddr;
2884 /* Determine the actual number of bytes per element */
2885 bsize_elem = PAGE_SIZE * (1 << sglist->order);
2887 scatterlist = sglist->scatterlist;
2889 for (i = 0; i < (len / bsize_elem); i++, buffer += bsize_elem) {
2890 kaddr = kmap(scatterlist[i].page);
2891 memcpy(kaddr, buffer, bsize_elem);
2892 kunmap(scatterlist[i].page);
2894 scatterlist[i].length = bsize_elem;
2896 if (result != 0) {
2897 ipr_trace;
2898 return result;
2902 if (len % bsize_elem) {
2903 kaddr = kmap(scatterlist[i].page);
2904 memcpy(kaddr, buffer, len % bsize_elem);
2905 kunmap(scatterlist[i].page);
2907 scatterlist[i].length = len % bsize_elem;
2910 sglist->buffer_len = len;
2911 return result;
2915 * ipr_build_ucode_ioadl - Build a microcode download IOADL
2916 * @ipr_cmd: ipr command struct
2917 * @sglist: scatter/gather list
2919 * Builds a microcode download IOA data list (IOADL).
2922 static void ipr_build_ucode_ioadl(struct ipr_cmnd *ipr_cmd,
2923 struct ipr_sglist *sglist)
2925 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
2926 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
2927 struct scatterlist *scatterlist = sglist->scatterlist;
2928 int i;
2930 ipr_cmd->dma_use_sg = sglist->num_dma_sg;
2931 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
2932 ioarcb->write_data_transfer_length = cpu_to_be32(sglist->buffer_len);
2933 ioarcb->write_ioadl_len =
2934 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
2936 for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
2937 ioadl[i].flags_and_data_len =
2938 cpu_to_be32(IPR_IOADL_FLAGS_WRITE | sg_dma_len(&scatterlist[i]));
2939 ioadl[i].address =
2940 cpu_to_be32(sg_dma_address(&scatterlist[i]));
2943 ioadl[i-1].flags_and_data_len |=
2944 cpu_to_be32(IPR_IOADL_FLAGS_LAST);
2948 * ipr_update_ioa_ucode - Update IOA's microcode
2949 * @ioa_cfg: ioa config struct
2950 * @sglist: scatter/gather list
2952 * Initiate an adapter reset to update the IOA's microcode
2954 * Return value:
2955 * 0 on success / -EIO on failure
2957 static int ipr_update_ioa_ucode(struct ipr_ioa_cfg *ioa_cfg,
2958 struct ipr_sglist *sglist)
2960 unsigned long lock_flags;
2962 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2964 if (ioa_cfg->ucode_sglist) {
2965 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2966 dev_err(&ioa_cfg->pdev->dev,
2967 "Microcode download already in progress\n");
2968 return -EIO;
2971 sglist->num_dma_sg = pci_map_sg(ioa_cfg->pdev, sglist->scatterlist,
2972 sglist->num_sg, DMA_TO_DEVICE);
2974 if (!sglist->num_dma_sg) {
2975 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2976 dev_err(&ioa_cfg->pdev->dev,
2977 "Failed to map microcode download buffer!\n");
2978 return -EIO;
2981 ioa_cfg->ucode_sglist = sglist;
2982 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL);
2983 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2984 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
2986 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
2987 ioa_cfg->ucode_sglist = NULL;
2988 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
2989 return 0;
2993 * ipr_store_update_fw - Update the firmware on the adapter
2994 * @class_dev: class_device struct
2995 * @buf: buffer
2996 * @count: buffer size
2998 * This function will update the firmware on the adapter.
3000 * Return value:
3001 * count on success / other on failure
3003 static ssize_t ipr_store_update_fw(struct class_device *class_dev,
3004 const char *buf, size_t count)
3006 struct Scsi_Host *shost = class_to_shost(class_dev);
3007 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
3008 struct ipr_ucode_image_header *image_hdr;
3009 const struct firmware *fw_entry;
3010 struct ipr_sglist *sglist;
3011 char fname[100];
3012 char *src;
3013 int len, result, dnld_size;
3015 if (!capable(CAP_SYS_ADMIN))
3016 return -EACCES;
3018 len = snprintf(fname, 99, "%s", buf);
3019 fname[len-1] = '\0';
3021 if(request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) {
3022 dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname);
3023 return -EIO;
3026 image_hdr = (struct ipr_ucode_image_header *)fw_entry->data;
3028 if (be32_to_cpu(image_hdr->header_length) > fw_entry->size ||
3029 (ioa_cfg->vpd_cbs->page3_data.card_type &&
3030 ioa_cfg->vpd_cbs->page3_data.card_type != image_hdr->card_type)) {
3031 dev_err(&ioa_cfg->pdev->dev, "Invalid microcode buffer\n");
3032 release_firmware(fw_entry);
3033 return -EINVAL;
3036 src = (u8 *)image_hdr + be32_to_cpu(image_hdr->header_length);
3037 dnld_size = fw_entry->size - be32_to_cpu(image_hdr->header_length);
3038 sglist = ipr_alloc_ucode_buffer(dnld_size);
3040 if (!sglist) {
3041 dev_err(&ioa_cfg->pdev->dev, "Microcode buffer allocation failed\n");
3042 release_firmware(fw_entry);
3043 return -ENOMEM;
3046 result = ipr_copy_ucode_buffer(sglist, src, dnld_size);
3048 if (result) {
3049 dev_err(&ioa_cfg->pdev->dev,
3050 "Microcode buffer copy to DMA buffer failed\n");
3051 goto out;
3054 result = ipr_update_ioa_ucode(ioa_cfg, sglist);
3056 if (!result)
3057 result = count;
3058 out:
3059 ipr_free_ucode_buffer(sglist);
3060 release_firmware(fw_entry);
3061 return result;
3064 static struct class_device_attribute ipr_update_fw_attr = {
3065 .attr = {
3066 .name = "update_fw",
3067 .mode = S_IWUSR,
3069 .store = ipr_store_update_fw
3072 static struct class_device_attribute *ipr_ioa_attrs[] = {
3073 &ipr_fw_version_attr,
3074 &ipr_log_level_attr,
3075 &ipr_diagnostics_attr,
3076 &ipr_ioa_state_attr,
3077 &ipr_ioa_reset_attr,
3078 &ipr_update_fw_attr,
3079 &ipr_ioa_cache_attr,
3080 NULL,
3083 #ifdef CONFIG_SCSI_IPR_DUMP
3085 * ipr_read_dump - Dump the adapter
3086 * @kobj: kobject struct
3087 * @buf: buffer
3088 * @off: offset
3089 * @count: buffer size
3091 * Return value:
3092 * number of bytes printed to buffer
3094 static ssize_t ipr_read_dump(struct kobject *kobj, char *buf,
3095 loff_t off, size_t count)
3097 struct class_device *cdev = container_of(kobj,struct class_device,kobj);
3098 struct Scsi_Host *shost = class_to_shost(cdev);
3099 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
3100 struct ipr_dump *dump;
3101 unsigned long lock_flags = 0;
3102 char *src;
3103 int len;
3104 size_t rc = count;
3106 if (!capable(CAP_SYS_ADMIN))
3107 return -EACCES;
3109 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3110 dump = ioa_cfg->dump;
3112 if (ioa_cfg->sdt_state != DUMP_OBTAINED || !dump) {
3113 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3114 return 0;
3116 kref_get(&dump->kref);
3117 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3119 if (off > dump->driver_dump.hdr.len) {
3120 kref_put(&dump->kref, ipr_release_dump);
3121 return 0;
3124 if (off + count > dump->driver_dump.hdr.len) {
3125 count = dump->driver_dump.hdr.len - off;
3126 rc = count;
3129 if (count && off < sizeof(dump->driver_dump)) {
3130 if (off + count > sizeof(dump->driver_dump))
3131 len = sizeof(dump->driver_dump) - off;
3132 else
3133 len = count;
3134 src = (u8 *)&dump->driver_dump + off;
3135 memcpy(buf, src, len);
3136 buf += len;
3137 off += len;
3138 count -= len;
3141 off -= sizeof(dump->driver_dump);
3143 if (count && off < offsetof(struct ipr_ioa_dump, ioa_data)) {
3144 if (off + count > offsetof(struct ipr_ioa_dump, ioa_data))
3145 len = offsetof(struct ipr_ioa_dump, ioa_data) - off;
3146 else
3147 len = count;
3148 src = (u8 *)&dump->ioa_dump + off;
3149 memcpy(buf, src, len);
3150 buf += len;
3151 off += len;
3152 count -= len;
3155 off -= offsetof(struct ipr_ioa_dump, ioa_data);
3157 while (count) {
3158 if ((off & PAGE_MASK) != ((off + count) & PAGE_MASK))
3159 len = PAGE_ALIGN(off) - off;
3160 else
3161 len = count;
3162 src = (u8 *)dump->ioa_dump.ioa_data[(off & PAGE_MASK) >> PAGE_SHIFT];
3163 src += off & ~PAGE_MASK;
3164 memcpy(buf, src, len);
3165 buf += len;
3166 off += len;
3167 count -= len;
3170 kref_put(&dump->kref, ipr_release_dump);
3171 return rc;
3175 * ipr_alloc_dump - Prepare for adapter dump
3176 * @ioa_cfg: ioa config struct
3178 * Return value:
3179 * 0 on success / other on failure
3181 static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg)
3183 struct ipr_dump *dump;
3184 unsigned long lock_flags = 0;
3186 dump = kzalloc(sizeof(struct ipr_dump), GFP_KERNEL);
3188 if (!dump) {
3189 ipr_err("Dump memory allocation failed\n");
3190 return -ENOMEM;
3193 kref_init(&dump->kref);
3194 dump->ioa_cfg = ioa_cfg;
3196 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3198 if (INACTIVE != ioa_cfg->sdt_state) {
3199 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3200 kfree(dump);
3201 return 0;
3204 ioa_cfg->dump = dump;
3205 ioa_cfg->sdt_state = WAIT_FOR_DUMP;
3206 if (ioa_cfg->ioa_is_dead && !ioa_cfg->dump_taken) {
3207 ioa_cfg->dump_taken = 1;
3208 schedule_work(&ioa_cfg->work_q);
3210 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3212 return 0;
3216 * ipr_free_dump - Free adapter dump memory
3217 * @ioa_cfg: ioa config struct
3219 * Return value:
3220 * 0 on success / other on failure
3222 static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg)
3224 struct ipr_dump *dump;
3225 unsigned long lock_flags = 0;
3227 ENTER;
3229 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3230 dump = ioa_cfg->dump;
3231 if (!dump) {
3232 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3233 return 0;
3236 ioa_cfg->dump = NULL;
3237 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3239 kref_put(&dump->kref, ipr_release_dump);
3241 LEAVE;
3242 return 0;
3246 * ipr_write_dump - Setup dump state of adapter
3247 * @kobj: kobject struct
3248 * @buf: buffer
3249 * @off: offset
3250 * @count: buffer size
3252 * Return value:
3253 * number of bytes printed to buffer
3255 static ssize_t ipr_write_dump(struct kobject *kobj, char *buf,
3256 loff_t off, size_t count)
3258 struct class_device *cdev = container_of(kobj,struct class_device,kobj);
3259 struct Scsi_Host *shost = class_to_shost(cdev);
3260 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata;
3261 int rc;
3263 if (!capable(CAP_SYS_ADMIN))
3264 return -EACCES;
3266 if (buf[0] == '1')
3267 rc = ipr_alloc_dump(ioa_cfg);
3268 else if (buf[0] == '0')
3269 rc = ipr_free_dump(ioa_cfg);
3270 else
3271 return -EINVAL;
3273 if (rc)
3274 return rc;
3275 else
3276 return count;
3279 static struct bin_attribute ipr_dump_attr = {
3280 .attr = {
3281 .name = "dump",
3282 .mode = S_IRUSR | S_IWUSR,
3284 .size = 0,
3285 .read = ipr_read_dump,
3286 .write = ipr_write_dump
3288 #else
3289 static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg) { return 0; };
3290 #endif
3293 * ipr_change_queue_depth - Change the device's queue depth
3294 * @sdev: scsi device struct
3295 * @qdepth: depth to set
3297 * Return value:
3298 * actual depth set
3300 static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth)
3302 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
3303 struct ipr_resource_entry *res;
3304 unsigned long lock_flags = 0;
3306 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3307 res = (struct ipr_resource_entry *)sdev->hostdata;
3309 if (res && ipr_is_gata(res) && qdepth > IPR_MAX_CMD_PER_ATA_LUN)
3310 qdepth = IPR_MAX_CMD_PER_ATA_LUN;
3311 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3313 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
3314 return sdev->queue_depth;
3318 * ipr_change_queue_type - Change the device's queue type
3319 * @dsev: scsi device struct
3320 * @tag_type: type of tags to use
3322 * Return value:
3323 * actual queue type set
3325 static int ipr_change_queue_type(struct scsi_device *sdev, int tag_type)
3327 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
3328 struct ipr_resource_entry *res;
3329 unsigned long lock_flags = 0;
3331 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3332 res = (struct ipr_resource_entry *)sdev->hostdata;
3334 if (res) {
3335 if (ipr_is_gscsi(res) && sdev->tagged_supported) {
3337 * We don't bother quiescing the device here since the
3338 * adapter firmware does it for us.
3340 scsi_set_tag_type(sdev, tag_type);
3342 if (tag_type)
3343 scsi_activate_tcq(sdev, sdev->queue_depth);
3344 else
3345 scsi_deactivate_tcq(sdev, sdev->queue_depth);
3346 } else
3347 tag_type = 0;
3348 } else
3349 tag_type = 0;
3351 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3352 return tag_type;
3356 * ipr_show_adapter_handle - Show the adapter's resource handle for this device
3357 * @dev: device struct
3358 * @buf: buffer
3360 * Return value:
3361 * number of bytes printed to buffer
3363 static ssize_t ipr_show_adapter_handle(struct device *dev, struct device_attribute *attr, char *buf)
3365 struct scsi_device *sdev = to_scsi_device(dev);
3366 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
3367 struct ipr_resource_entry *res;
3368 unsigned long lock_flags = 0;
3369 ssize_t len = -ENXIO;
3371 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3372 res = (struct ipr_resource_entry *)sdev->hostdata;
3373 if (res)
3374 len = snprintf(buf, PAGE_SIZE, "%08X\n", res->cfgte.res_handle);
3375 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3376 return len;
3379 static struct device_attribute ipr_adapter_handle_attr = {
3380 .attr = {
3381 .name = "adapter_handle",
3382 .mode = S_IRUSR,
3384 .show = ipr_show_adapter_handle
3387 static struct device_attribute *ipr_dev_attrs[] = {
3388 &ipr_adapter_handle_attr,
3389 NULL,
3393 * ipr_biosparam - Return the HSC mapping
3394 * @sdev: scsi device struct
3395 * @block_device: block device pointer
3396 * @capacity: capacity of the device
3397 * @parm: Array containing returned HSC values.
3399 * This function generates the HSC parms that fdisk uses.
3400 * We want to make sure we return something that places partitions
3401 * on 4k boundaries for best performance with the IOA.
3403 * Return value:
3404 * 0 on success
3406 static int ipr_biosparam(struct scsi_device *sdev,
3407 struct block_device *block_device,
3408 sector_t capacity, int *parm)
3410 int heads, sectors;
3411 sector_t cylinders;
3413 heads = 128;
3414 sectors = 32;
3416 cylinders = capacity;
3417 sector_div(cylinders, (128 * 32));
3419 /* return result */
3420 parm[0] = heads;
3421 parm[1] = sectors;
3422 parm[2] = cylinders;
3424 return 0;
3428 * ipr_find_starget - Find target based on bus/target.
3429 * @starget: scsi target struct
3431 * Return value:
3432 * resource entry pointer if found / NULL if not found
3434 static struct ipr_resource_entry *ipr_find_starget(struct scsi_target *starget)
3436 struct Scsi_Host *shost = dev_to_shost(&starget->dev);
3437 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
3438 struct ipr_resource_entry *res;
3440 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
3441 if ((res->cfgte.res_addr.bus == starget->channel) &&
3442 (res->cfgte.res_addr.target == starget->id) &&
3443 (res->cfgte.res_addr.lun == 0)) {
3444 return res;
3448 return NULL;
3451 static struct ata_port_info sata_port_info;
3454 * ipr_target_alloc - Prepare for commands to a SCSI target
3455 * @starget: scsi target struct
3457 * If the device is a SATA device, this function allocates an
3458 * ATA port with libata, else it does nothing.
3460 * Return value:
3461 * 0 on success / non-0 on failure
3463 static int ipr_target_alloc(struct scsi_target *starget)
3465 struct Scsi_Host *shost = dev_to_shost(&starget->dev);
3466 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
3467 struct ipr_sata_port *sata_port;
3468 struct ata_port *ap;
3469 struct ipr_resource_entry *res;
3470 unsigned long lock_flags;
3472 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3473 res = ipr_find_starget(starget);
3474 starget->hostdata = NULL;
3476 if (res && ipr_is_gata(res)) {
3477 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3478 sata_port = kzalloc(sizeof(*sata_port), GFP_KERNEL);
3479 if (!sata_port)
3480 return -ENOMEM;
3482 ap = ata_sas_port_alloc(&ioa_cfg->ata_host, &sata_port_info, shost);
3483 if (ap) {
3484 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3485 sata_port->ioa_cfg = ioa_cfg;
3486 sata_port->ap = ap;
3487 sata_port->res = res;
3489 res->sata_port = sata_port;
3490 ap->private_data = sata_port;
3491 starget->hostdata = sata_port;
3492 } else {
3493 kfree(sata_port);
3494 return -ENOMEM;
3497 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3499 return 0;
3503 * ipr_target_destroy - Destroy a SCSI target
3504 * @starget: scsi target struct
3506 * If the device was a SATA device, this function frees the libata
3507 * ATA port, else it does nothing.
3510 static void ipr_target_destroy(struct scsi_target *starget)
3512 struct ipr_sata_port *sata_port = starget->hostdata;
3514 if (sata_port) {
3515 starget->hostdata = NULL;
3516 ata_sas_port_destroy(sata_port->ap);
3517 kfree(sata_port);
3522 * ipr_find_sdev - Find device based on bus/target/lun.
3523 * @sdev: scsi device struct
3525 * Return value:
3526 * resource entry pointer if found / NULL if not found
3528 static struct ipr_resource_entry *ipr_find_sdev(struct scsi_device *sdev)
3530 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
3531 struct ipr_resource_entry *res;
3533 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
3534 if ((res->cfgte.res_addr.bus == sdev->channel) &&
3535 (res->cfgte.res_addr.target == sdev->id) &&
3536 (res->cfgte.res_addr.lun == sdev->lun))
3537 return res;
3540 return NULL;
3544 * ipr_slave_destroy - Unconfigure a SCSI device
3545 * @sdev: scsi device struct
3547 * Return value:
3548 * nothing
3550 static void ipr_slave_destroy(struct scsi_device *sdev)
3552 struct ipr_resource_entry *res;
3553 struct ipr_ioa_cfg *ioa_cfg;
3554 unsigned long lock_flags = 0;
3556 ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
3558 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3559 res = (struct ipr_resource_entry *) sdev->hostdata;
3560 if (res) {
3561 if (res->sata_port)
3562 ata_port_disable(res->sata_port->ap);
3563 sdev->hostdata = NULL;
3564 res->sdev = NULL;
3565 res->sata_port = NULL;
3567 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3571 * ipr_slave_configure - Configure a SCSI device
3572 * @sdev: scsi device struct
3574 * This function configures the specified scsi device.
3576 * Return value:
3577 * 0 on success
3579 static int ipr_slave_configure(struct scsi_device *sdev)
3581 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
3582 struct ipr_resource_entry *res;
3583 unsigned long lock_flags = 0;
3585 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3586 res = sdev->hostdata;
3587 if (res) {
3588 if (ipr_is_af_dasd_device(res))
3589 sdev->type = TYPE_RAID;
3590 if (ipr_is_af_dasd_device(res) || ipr_is_ioa_resource(res)) {
3591 sdev->scsi_level = 4;
3592 sdev->no_uld_attach = 1;
3594 if (ipr_is_vset_device(res)) {
3595 sdev->timeout = IPR_VSET_RW_TIMEOUT;
3596 blk_queue_max_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS);
3598 if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res))
3599 sdev->allow_restart = 1;
3600 if (ipr_is_gata(res) && res->sata_port) {
3601 scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN);
3602 ata_sas_slave_configure(sdev, res->sata_port->ap);
3603 } else {
3604 scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
3607 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3608 return 0;
3612 * ipr_ata_slave_alloc - Prepare for commands to a SATA device
3613 * @sdev: scsi device struct
3615 * This function initializes an ATA port so that future commands
3616 * sent through queuecommand will work.
3618 * Return value:
3619 * 0 on success
3621 static int ipr_ata_slave_alloc(struct scsi_device *sdev)
3623 struct ipr_sata_port *sata_port = NULL;
3624 int rc = -ENXIO;
3626 ENTER;
3627 if (sdev->sdev_target)
3628 sata_port = sdev->sdev_target->hostdata;
3629 if (sata_port)
3630 rc = ata_sas_port_init(sata_port->ap);
3631 if (rc)
3632 ipr_slave_destroy(sdev);
3634 LEAVE;
3635 return rc;
3639 * ipr_slave_alloc - Prepare for commands to a device.
3640 * @sdev: scsi device struct
3642 * This function saves a pointer to the resource entry
3643 * in the scsi device struct if the device exists. We
3644 * can then use this pointer in ipr_queuecommand when
3645 * handling new commands.
3647 * Return value:
3648 * 0 on success / -ENXIO if device does not exist
3650 static int ipr_slave_alloc(struct scsi_device *sdev)
3652 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
3653 struct ipr_resource_entry *res;
3654 unsigned long lock_flags;
3655 int rc = -ENXIO;
3657 sdev->hostdata = NULL;
3659 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3661 res = ipr_find_sdev(sdev);
3662 if (res) {
3663 res->sdev = sdev;
3664 res->add_to_ml = 0;
3665 res->in_erp = 0;
3666 sdev->hostdata = res;
3667 if (!ipr_is_naca_model(res))
3668 res->needs_sync_complete = 1;
3669 rc = 0;
3670 if (ipr_is_gata(res)) {
3671 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3672 return ipr_ata_slave_alloc(sdev);
3676 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3678 return rc;
3682 * ipr_eh_host_reset - Reset the host adapter
3683 * @scsi_cmd: scsi command struct
3685 * Return value:
3686 * SUCCESS / FAILED
3688 static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd)
3690 struct ipr_ioa_cfg *ioa_cfg;
3691 int rc;
3693 ENTER;
3694 ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
3696 dev_err(&ioa_cfg->pdev->dev,
3697 "Adapter being reset as a result of error recovery.\n");
3699 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
3700 ioa_cfg->sdt_state = GET_DUMP;
3702 rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV);
3704 LEAVE;
3705 return rc;
3708 static int ipr_eh_host_reset(struct scsi_cmnd * cmd)
3710 int rc;
3712 spin_lock_irq(cmd->device->host->host_lock);
3713 rc = __ipr_eh_host_reset(cmd);
3714 spin_unlock_irq(cmd->device->host->host_lock);
3716 return rc;
3720 * ipr_device_reset - Reset the device
3721 * @ioa_cfg: ioa config struct
3722 * @res: resource entry struct
3724 * This function issues a device reset to the affected device.
3725 * If the device is a SCSI device, a LUN reset will be sent
3726 * to the device first. If that does not work, a target reset
3727 * will be sent. If the device is a SATA device, a PHY reset will
3728 * be sent.
3730 * Return value:
3731 * 0 on success / non-zero on failure
3733 static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg,
3734 struct ipr_resource_entry *res)
3736 struct ipr_cmnd *ipr_cmd;
3737 struct ipr_ioarcb *ioarcb;
3738 struct ipr_cmd_pkt *cmd_pkt;
3739 struct ipr_ioarcb_ata_regs *regs;
3740 u32 ioasc;
3742 ENTER;
3743 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
3744 ioarcb = &ipr_cmd->ioarcb;
3745 cmd_pkt = &ioarcb->cmd_pkt;
3746 regs = &ioarcb->add_data.u.regs;
3748 ioarcb->res_handle = res->cfgte.res_handle;
3749 cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
3750 cmd_pkt->cdb[0] = IPR_RESET_DEVICE;
3751 if (ipr_is_gata(res)) {
3752 cmd_pkt->cdb[2] = IPR_ATA_PHY_RESET;
3753 ioarcb->add_cmd_parms_len = cpu_to_be32(sizeof(regs->flags));
3754 regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
3757 ipr_send_blocking_cmd(ipr_cmd, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
3758 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
3759 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3760 if (ipr_is_gata(res) && res->sata_port && ioasc != IPR_IOASC_IOA_WAS_RESET)
3761 memcpy(&res->sata_port->ioasa, &ipr_cmd->ioasa.u.gata,
3762 sizeof(struct ipr_ioasa_gata));
3764 LEAVE;
3765 return (IPR_IOASC_SENSE_KEY(ioasc) ? -EIO : 0);
3769 * ipr_sata_reset - Reset the SATA port
3770 * @ap: SATA port to reset
3771 * @classes: class of the attached device
3773 * This function issues a SATA phy reset to the affected ATA port.
3775 * Return value:
3776 * 0 on success / non-zero on failure
3778 static int ipr_sata_reset(struct ata_port *ap, unsigned int *classes)
3780 struct ipr_sata_port *sata_port = ap->private_data;
3781 struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
3782 struct ipr_resource_entry *res;
3783 unsigned long lock_flags = 0;
3784 int rc = -ENXIO;
3786 ENTER;
3787 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3788 while(ioa_cfg->in_reset_reload) {
3789 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3790 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
3791 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3794 res = sata_port->res;
3795 if (res) {
3796 rc = ipr_device_reset(ioa_cfg, res);
3797 switch(res->cfgte.proto) {
3798 case IPR_PROTO_SATA:
3799 case IPR_PROTO_SAS_STP:
3800 *classes = ATA_DEV_ATA;
3801 break;
3802 case IPR_PROTO_SATA_ATAPI:
3803 case IPR_PROTO_SAS_STP_ATAPI:
3804 *classes = ATA_DEV_ATAPI;
3805 break;
3806 default:
3807 *classes = ATA_DEV_UNKNOWN;
3808 break;
3812 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3813 LEAVE;
3814 return rc;
3818 * ipr_eh_dev_reset - Reset the device
3819 * @scsi_cmd: scsi command struct
3821 * This function issues a device reset to the affected device.
3822 * A LUN reset will be sent to the device first. If that does
3823 * not work, a target reset will be sent.
3825 * Return value:
3826 * SUCCESS / FAILED
3828 static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd)
3830 struct ipr_cmnd *ipr_cmd;
3831 struct ipr_ioa_cfg *ioa_cfg;
3832 struct ipr_resource_entry *res;
3833 struct ata_port *ap;
3834 int rc = 0;
3836 ENTER;
3837 ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
3838 res = scsi_cmd->device->hostdata;
3840 if (!res)
3841 return FAILED;
3844 * If we are currently going through reset/reload, return failed. This will force the
3845 * mid-layer to call ipr_eh_host_reset, which will then go to sleep and wait for the
3846 * reset to complete
3848 if (ioa_cfg->in_reset_reload)
3849 return FAILED;
3850 if (ioa_cfg->ioa_is_dead)
3851 return FAILED;
3853 list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
3854 if (ipr_cmd->ioarcb.res_handle == res->cfgte.res_handle) {
3855 if (ipr_cmd->scsi_cmd)
3856 ipr_cmd->done = ipr_scsi_eh_done;
3857 if (ipr_cmd->qc && !(ipr_cmd->qc->flags & ATA_QCFLAG_FAILED)) {
3858 ipr_cmd->qc->err_mask |= AC_ERR_TIMEOUT;
3859 ipr_cmd->qc->flags |= ATA_QCFLAG_FAILED;
3864 res->resetting_device = 1;
3865 scmd_printk(KERN_ERR, scsi_cmd, "Resetting device\n");
3867 if (ipr_is_gata(res) && res->sata_port) {
3868 ap = res->sata_port->ap;
3869 spin_unlock_irq(scsi_cmd->device->host->host_lock);
3870 ata_do_eh(ap, NULL, NULL, ipr_sata_reset, NULL);
3871 spin_lock_irq(scsi_cmd->device->host->host_lock);
3872 } else
3873 rc = ipr_device_reset(ioa_cfg, res);
3874 res->resetting_device = 0;
3876 LEAVE;
3877 return (rc ? FAILED : SUCCESS);
3880 static int ipr_eh_dev_reset(struct scsi_cmnd * cmd)
3882 int rc;
3884 spin_lock_irq(cmd->device->host->host_lock);
3885 rc = __ipr_eh_dev_reset(cmd);
3886 spin_unlock_irq(cmd->device->host->host_lock);
3888 return rc;
3892 * ipr_bus_reset_done - Op done function for bus reset.
3893 * @ipr_cmd: ipr command struct
3895 * This function is the op done function for a bus reset
3897 * Return value:
3898 * none
3900 static void ipr_bus_reset_done(struct ipr_cmnd *ipr_cmd)
3902 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
3903 struct ipr_resource_entry *res;
3905 ENTER;
3906 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
3907 if (!memcmp(&res->cfgte.res_handle, &ipr_cmd->ioarcb.res_handle,
3908 sizeof(res->cfgte.res_handle))) {
3909 scsi_report_bus_reset(ioa_cfg->host, res->cfgte.res_addr.bus);
3910 break;
3915 * If abort has not completed, indicate the reset has, else call the
3916 * abort's done function to wake the sleeping eh thread
3918 if (ipr_cmd->sibling->sibling)
3919 ipr_cmd->sibling->sibling = NULL;
3920 else
3921 ipr_cmd->sibling->done(ipr_cmd->sibling);
3923 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
3924 LEAVE;
3928 * ipr_abort_timeout - An abort task has timed out
3929 * @ipr_cmd: ipr command struct
3931 * This function handles when an abort task times out. If this
3932 * happens we issue a bus reset since we have resources tied
3933 * up that must be freed before returning to the midlayer.
3935 * Return value:
3936 * none
3938 static void ipr_abort_timeout(struct ipr_cmnd *ipr_cmd)
3940 struct ipr_cmnd *reset_cmd;
3941 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
3942 struct ipr_cmd_pkt *cmd_pkt;
3943 unsigned long lock_flags = 0;
3945 ENTER;
3946 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
3947 if (ipr_cmd->completion.done || ioa_cfg->in_reset_reload) {
3948 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3949 return;
3952 sdev_printk(KERN_ERR, ipr_cmd->u.sdev, "Abort timed out. Resetting bus.\n");
3953 reset_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
3954 ipr_cmd->sibling = reset_cmd;
3955 reset_cmd->sibling = ipr_cmd;
3956 reset_cmd->ioarcb.res_handle = ipr_cmd->ioarcb.res_handle;
3957 cmd_pkt = &reset_cmd->ioarcb.cmd_pkt;
3958 cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
3959 cmd_pkt->cdb[0] = IPR_RESET_DEVICE;
3960 cmd_pkt->cdb[2] = IPR_RESET_TYPE_SELECT | IPR_BUS_RESET;
3962 ipr_do_req(reset_cmd, ipr_bus_reset_done, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT);
3963 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
3964 LEAVE;
3968 * ipr_cancel_op - Cancel specified op
3969 * @scsi_cmd: scsi command struct
3971 * This function cancels specified op.
3973 * Return value:
3974 * SUCCESS / FAILED
3976 static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
3978 struct ipr_cmnd *ipr_cmd;
3979 struct ipr_ioa_cfg *ioa_cfg;
3980 struct ipr_resource_entry *res;
3981 struct ipr_cmd_pkt *cmd_pkt;
3982 u32 ioasc;
3983 int op_found = 0;
3985 ENTER;
3986 ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata;
3987 res = scsi_cmd->device->hostdata;
3989 /* If we are currently going through reset/reload, return failed.
3990 * This will force the mid-layer to call ipr_eh_host_reset,
3991 * which will then go to sleep and wait for the reset to complete
3993 if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead)
3994 return FAILED;
3995 if (!res || !ipr_is_gscsi(res))
3996 return FAILED;
3998 list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
3999 if (ipr_cmd->scsi_cmd == scsi_cmd) {
4000 ipr_cmd->done = ipr_scsi_eh_done;
4001 op_found = 1;
4002 break;
4006 if (!op_found)
4007 return SUCCESS;
4009 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
4010 ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle;
4011 cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
4012 cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
4013 cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS;
4014 ipr_cmd->u.sdev = scsi_cmd->device;
4016 scmd_printk(KERN_ERR, scsi_cmd, "Aborting command: %02X\n",
4017 scsi_cmd->cmnd[0]);
4018 ipr_send_blocking_cmd(ipr_cmd, ipr_abort_timeout, IPR_CANCEL_ALL_TIMEOUT);
4019 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4022 * If the abort task timed out and we sent a bus reset, we will get
4023 * one the following responses to the abort
4025 if (ioasc == IPR_IOASC_BUS_WAS_RESET || ioasc == IPR_IOASC_SYNC_REQUIRED) {
4026 ioasc = 0;
4027 ipr_trace;
4030 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4031 if (!ipr_is_naca_model(res))
4032 res->needs_sync_complete = 1;
4034 LEAVE;
4035 return (IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS);
4039 * ipr_eh_abort - Abort a single op
4040 * @scsi_cmd: scsi command struct
4042 * Return value:
4043 * SUCCESS / FAILED
4045 static int ipr_eh_abort(struct scsi_cmnd * scsi_cmd)
4047 unsigned long flags;
4048 int rc;
4050 ENTER;
4052 spin_lock_irqsave(scsi_cmd->device->host->host_lock, flags);
4053 rc = ipr_cancel_op(scsi_cmd);
4054 spin_unlock_irqrestore(scsi_cmd->device->host->host_lock, flags);
4056 LEAVE;
4057 return rc;
4061 * ipr_handle_other_interrupt - Handle "other" interrupts
4062 * @ioa_cfg: ioa config struct
4063 * @int_reg: interrupt register
4065 * Return value:
4066 * IRQ_NONE / IRQ_HANDLED
4068 static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg,
4069 volatile u32 int_reg)
4071 irqreturn_t rc = IRQ_HANDLED;
4073 if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
4074 /* Mask the interrupt */
4075 writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.set_interrupt_mask_reg);
4077 /* Clear the interrupt */
4078 writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.clr_interrupt_reg);
4079 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
4081 list_del(&ioa_cfg->reset_cmd->queue);
4082 del_timer(&ioa_cfg->reset_cmd->timer);
4083 ipr_reset_ioa_job(ioa_cfg->reset_cmd);
4084 } else {
4085 if (int_reg & IPR_PCII_IOA_UNIT_CHECKED)
4086 ioa_cfg->ioa_unit_checked = 1;
4087 else
4088 dev_err(&ioa_cfg->pdev->dev,
4089 "Permanent IOA failure. 0x%08X\n", int_reg);
4091 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
4092 ioa_cfg->sdt_state = GET_DUMP;
4094 ipr_mask_and_clear_interrupts(ioa_cfg, ~0);
4095 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
4098 return rc;
4102 * ipr_isr - Interrupt service routine
4103 * @irq: irq number
4104 * @devp: pointer to ioa config struct
4106 * Return value:
4107 * IRQ_NONE / IRQ_HANDLED
4109 static irqreturn_t ipr_isr(int irq, void *devp)
4111 struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
4112 unsigned long lock_flags = 0;
4113 volatile u32 int_reg, int_mask_reg;
4114 u32 ioasc;
4115 u16 cmd_index;
4116 struct ipr_cmnd *ipr_cmd;
4117 irqreturn_t rc = IRQ_NONE;
4119 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
4121 /* If interrupts are disabled, ignore the interrupt */
4122 if (!ioa_cfg->allow_interrupts) {
4123 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
4124 return IRQ_NONE;
4127 int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
4128 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
4130 /* If an interrupt on the adapter did not occur, ignore it */
4131 if (unlikely((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0)) {
4132 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
4133 return IRQ_NONE;
4136 while (1) {
4137 ipr_cmd = NULL;
4139 while ((be32_to_cpu(*ioa_cfg->hrrq_curr) & IPR_HRRQ_TOGGLE_BIT) ==
4140 ioa_cfg->toggle_bit) {
4142 cmd_index = (be32_to_cpu(*ioa_cfg->hrrq_curr) &
4143 IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT;
4145 if (unlikely(cmd_index >= IPR_NUM_CMD_BLKS)) {
4146 ioa_cfg->errors_logged++;
4147 dev_err(&ioa_cfg->pdev->dev, "Invalid response handle from IOA\n");
4149 if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
4150 ioa_cfg->sdt_state = GET_DUMP;
4152 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
4153 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
4154 return IRQ_HANDLED;
4157 ipr_cmd = ioa_cfg->ipr_cmnd_list[cmd_index];
4159 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4161 ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, ioasc);
4163 list_del(&ipr_cmd->queue);
4164 del_timer(&ipr_cmd->timer);
4165 ipr_cmd->done(ipr_cmd);
4167 rc = IRQ_HANDLED;
4169 if (ioa_cfg->hrrq_curr < ioa_cfg->hrrq_end) {
4170 ioa_cfg->hrrq_curr++;
4171 } else {
4172 ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start;
4173 ioa_cfg->toggle_bit ^= 1u;
4177 if (ipr_cmd != NULL) {
4178 /* Clear the PCI interrupt */
4179 writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg);
4180 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
4181 } else
4182 break;
4185 if (unlikely(rc == IRQ_NONE))
4186 rc = ipr_handle_other_interrupt(ioa_cfg, int_reg);
4188 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
4189 return rc;
4193 * ipr_build_ioadl - Build a scatter/gather list and map the buffer
4194 * @ioa_cfg: ioa config struct
4195 * @ipr_cmd: ipr command struct
4197 * Return value:
4198 * 0 on success / -1 on failure
4200 static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg,
4201 struct ipr_cmnd *ipr_cmd)
4203 int i;
4204 struct scatterlist *sglist;
4205 u32 length;
4206 u32 ioadl_flags = 0;
4207 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
4208 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
4209 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
4211 length = scsi_cmd->request_bufflen;
4213 if (length == 0)
4214 return 0;
4216 if (scsi_cmd->use_sg) {
4217 ipr_cmd->dma_use_sg = pci_map_sg(ioa_cfg->pdev,
4218 scsi_cmd->request_buffer,
4219 scsi_cmd->use_sg,
4220 scsi_cmd->sc_data_direction);
4222 if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
4223 ioadl_flags = IPR_IOADL_FLAGS_WRITE;
4224 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
4225 ioarcb->write_data_transfer_length = cpu_to_be32(length);
4226 ioarcb->write_ioadl_len =
4227 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
4228 } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) {
4229 ioadl_flags = IPR_IOADL_FLAGS_READ;
4230 ioarcb->read_data_transfer_length = cpu_to_be32(length);
4231 ioarcb->read_ioadl_len =
4232 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
4235 sglist = scsi_cmd->request_buffer;
4237 for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
4238 ioadl[i].flags_and_data_len =
4239 cpu_to_be32(ioadl_flags | sg_dma_len(&sglist[i]));
4240 ioadl[i].address =
4241 cpu_to_be32(sg_dma_address(&sglist[i]));
4244 if (likely(ipr_cmd->dma_use_sg)) {
4245 ioadl[i-1].flags_and_data_len |=
4246 cpu_to_be32(IPR_IOADL_FLAGS_LAST);
4247 return 0;
4248 } else
4249 dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
4250 } else {
4251 if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) {
4252 ioadl_flags = IPR_IOADL_FLAGS_WRITE;
4253 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
4254 ioarcb->write_data_transfer_length = cpu_to_be32(length);
4255 ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4256 } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) {
4257 ioadl_flags = IPR_IOADL_FLAGS_READ;
4258 ioarcb->read_data_transfer_length = cpu_to_be32(length);
4259 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4262 ipr_cmd->dma_handle = pci_map_single(ioa_cfg->pdev,
4263 scsi_cmd->request_buffer, length,
4264 scsi_cmd->sc_data_direction);
4266 if (likely(!pci_dma_mapping_error(ipr_cmd->dma_handle))) {
4267 ipr_cmd->dma_use_sg = 1;
4268 ioadl[0].flags_and_data_len =
4269 cpu_to_be32(ioadl_flags | length | IPR_IOADL_FLAGS_LAST);
4270 ioadl[0].address = cpu_to_be32(ipr_cmd->dma_handle);
4271 return 0;
4272 } else
4273 dev_err(&ioa_cfg->pdev->dev, "pci_map_single failed!\n");
4276 return -1;
4280 * ipr_get_task_attributes - Translate SPI Q-Tag to task attributes
4281 * @scsi_cmd: scsi command struct
4283 * Return value:
4284 * task attributes
4286 static u8 ipr_get_task_attributes(struct scsi_cmnd *scsi_cmd)
4288 u8 tag[2];
4289 u8 rc = IPR_FLAGS_LO_UNTAGGED_TASK;
4291 if (scsi_populate_tag_msg(scsi_cmd, tag)) {
4292 switch (tag[0]) {
4293 case MSG_SIMPLE_TAG:
4294 rc = IPR_FLAGS_LO_SIMPLE_TASK;
4295 break;
4296 case MSG_HEAD_TAG:
4297 rc = IPR_FLAGS_LO_HEAD_OF_Q_TASK;
4298 break;
4299 case MSG_ORDERED_TAG:
4300 rc = IPR_FLAGS_LO_ORDERED_TASK;
4301 break;
4305 return rc;
4309 * ipr_erp_done - Process completion of ERP for a device
4310 * @ipr_cmd: ipr command struct
4312 * This function copies the sense buffer into the scsi_cmd
4313 * struct and pushes the scsi_done function.
4315 * Return value:
4316 * nothing
4318 static void ipr_erp_done(struct ipr_cmnd *ipr_cmd)
4320 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
4321 struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
4322 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4323 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4325 if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
4326 scsi_cmd->result |= (DID_ERROR << 16);
4327 scmd_printk(KERN_ERR, scsi_cmd,
4328 "Request Sense failed with IOASC: 0x%08X\n", ioasc);
4329 } else {
4330 memcpy(scsi_cmd->sense_buffer, ipr_cmd->sense_buffer,
4331 SCSI_SENSE_BUFFERSIZE);
4334 if (res) {
4335 if (!ipr_is_naca_model(res))
4336 res->needs_sync_complete = 1;
4337 res->in_erp = 0;
4339 ipr_unmap_sglist(ioa_cfg, ipr_cmd);
4340 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4341 scsi_cmd->scsi_done(scsi_cmd);
4345 * ipr_reinit_ipr_cmnd_for_erp - Re-initialize a cmnd block to be used for ERP
4346 * @ipr_cmd: ipr command struct
4348 * Return value:
4349 * none
4351 static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd)
4353 struct ipr_ioarcb *ioarcb;
4354 struct ipr_ioasa *ioasa;
4356 ioarcb = &ipr_cmd->ioarcb;
4357 ioasa = &ipr_cmd->ioasa;
4359 memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
4360 ioarcb->write_data_transfer_length = 0;
4361 ioarcb->read_data_transfer_length = 0;
4362 ioarcb->write_ioadl_len = 0;
4363 ioarcb->read_ioadl_len = 0;
4364 ioasa->ioasc = 0;
4365 ioasa->residual_data_len = 0;
4369 * ipr_erp_request_sense - Send request sense to a device
4370 * @ipr_cmd: ipr command struct
4372 * This function sends a request sense to a device as a result
4373 * of a check condition.
4375 * Return value:
4376 * nothing
4378 static void ipr_erp_request_sense(struct ipr_cmnd *ipr_cmd)
4380 struct ipr_cmd_pkt *cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
4381 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4383 if (IPR_IOASC_SENSE_KEY(ioasc) > 0) {
4384 ipr_erp_done(ipr_cmd);
4385 return;
4388 ipr_reinit_ipr_cmnd_for_erp(ipr_cmd);
4390 cmd_pkt->request_type = IPR_RQTYPE_SCSICDB;
4391 cmd_pkt->cdb[0] = REQUEST_SENSE;
4392 cmd_pkt->cdb[4] = SCSI_SENSE_BUFFERSIZE;
4393 cmd_pkt->flags_hi |= IPR_FLAGS_HI_SYNC_OVERRIDE;
4394 cmd_pkt->flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
4395 cmd_pkt->timeout = cpu_to_be16(IPR_REQUEST_SENSE_TIMEOUT / HZ);
4397 ipr_cmd->ioadl[0].flags_and_data_len =
4398 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | SCSI_SENSE_BUFFERSIZE);
4399 ipr_cmd->ioadl[0].address =
4400 cpu_to_be32(ipr_cmd->sense_buffer_dma);
4402 ipr_cmd->ioarcb.read_ioadl_len =
4403 cpu_to_be32(sizeof(struct ipr_ioadl_desc));
4404 ipr_cmd->ioarcb.read_data_transfer_length =
4405 cpu_to_be32(SCSI_SENSE_BUFFERSIZE);
4407 ipr_do_req(ipr_cmd, ipr_erp_done, ipr_timeout,
4408 IPR_REQUEST_SENSE_TIMEOUT * 2);
4412 * ipr_erp_cancel_all - Send cancel all to a device
4413 * @ipr_cmd: ipr command struct
4415 * This function sends a cancel all to a device to clear the
4416 * queue. If we are running TCQ on the device, QERR is set to 1,
4417 * which means all outstanding ops have been dropped on the floor.
4418 * Cancel all will return them to us.
4420 * Return value:
4421 * nothing
4423 static void ipr_erp_cancel_all(struct ipr_cmnd *ipr_cmd)
4425 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
4426 struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
4427 struct ipr_cmd_pkt *cmd_pkt;
4429 res->in_erp = 1;
4431 ipr_reinit_ipr_cmnd_for_erp(ipr_cmd);
4433 if (!scsi_get_tag_type(scsi_cmd->device)) {
4434 ipr_erp_request_sense(ipr_cmd);
4435 return;
4438 cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt;
4439 cmd_pkt->request_type = IPR_RQTYPE_IOACMD;
4440 cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS;
4442 ipr_do_req(ipr_cmd, ipr_erp_request_sense, ipr_timeout,
4443 IPR_CANCEL_ALL_TIMEOUT);
4447 * ipr_dump_ioasa - Dump contents of IOASA
4448 * @ioa_cfg: ioa config struct
4449 * @ipr_cmd: ipr command struct
4450 * @res: resource entry struct
4452 * This function is invoked by the interrupt handler when ops
4453 * fail. It will log the IOASA if appropriate. Only called
4454 * for GPDD ops.
4456 * Return value:
4457 * none
4459 static void ipr_dump_ioasa(struct ipr_ioa_cfg *ioa_cfg,
4460 struct ipr_cmnd *ipr_cmd, struct ipr_resource_entry *res)
4462 int i;
4463 u16 data_len;
4464 u32 ioasc;
4465 struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
4466 __be32 *ioasa_data = (__be32 *)ioasa;
4467 int error_index;
4469 ioasc = be32_to_cpu(ioasa->ioasc) & IPR_IOASC_IOASC_MASK;
4471 if (0 == ioasc)
4472 return;
4474 if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
4475 return;
4477 error_index = ipr_get_error(ioasc);
4479 if (ioa_cfg->log_level < IPR_MAX_LOG_LEVEL) {
4480 /* Don't log an error if the IOA already logged one */
4481 if (ioasa->ilid != 0)
4482 return;
4484 if (ipr_error_table[error_index].log_ioasa == 0)
4485 return;
4488 ipr_res_err(ioa_cfg, res, "%s\n", ipr_error_table[error_index].error);
4490 if (sizeof(struct ipr_ioasa) < be16_to_cpu(ioasa->ret_stat_len))
4491 data_len = sizeof(struct ipr_ioasa);
4492 else
4493 data_len = be16_to_cpu(ioasa->ret_stat_len);
4495 ipr_err("IOASA Dump:\n");
4497 for (i = 0; i < data_len / 4; i += 4) {
4498 ipr_err("%08X: %08X %08X %08X %08X\n", i*4,
4499 be32_to_cpu(ioasa_data[i]),
4500 be32_to_cpu(ioasa_data[i+1]),
4501 be32_to_cpu(ioasa_data[i+2]),
4502 be32_to_cpu(ioasa_data[i+3]));
4507 * ipr_gen_sense - Generate SCSI sense data from an IOASA
4508 * @ioasa: IOASA
4509 * @sense_buf: sense data buffer
4511 * Return value:
4512 * none
4514 static void ipr_gen_sense(struct ipr_cmnd *ipr_cmd)
4516 u32 failing_lba;
4517 u8 *sense_buf = ipr_cmd->scsi_cmd->sense_buffer;
4518 struct ipr_resource_entry *res = ipr_cmd->scsi_cmd->device->hostdata;
4519 struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
4520 u32 ioasc = be32_to_cpu(ioasa->ioasc);
4522 memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
4524 if (ioasc >= IPR_FIRST_DRIVER_IOASC)
4525 return;
4527 ipr_cmd->scsi_cmd->result = SAM_STAT_CHECK_CONDITION;
4529 if (ipr_is_vset_device(res) &&
4530 ioasc == IPR_IOASC_MED_DO_NOT_REALLOC &&
4531 ioasa->u.vset.failing_lba_hi != 0) {
4532 sense_buf[0] = 0x72;
4533 sense_buf[1] = IPR_IOASC_SENSE_KEY(ioasc);
4534 sense_buf[2] = IPR_IOASC_SENSE_CODE(ioasc);
4535 sense_buf[3] = IPR_IOASC_SENSE_QUAL(ioasc);
4537 sense_buf[7] = 12;
4538 sense_buf[8] = 0;
4539 sense_buf[9] = 0x0A;
4540 sense_buf[10] = 0x80;
4542 failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_hi);
4544 sense_buf[12] = (failing_lba & 0xff000000) >> 24;
4545 sense_buf[13] = (failing_lba & 0x00ff0000) >> 16;
4546 sense_buf[14] = (failing_lba & 0x0000ff00) >> 8;
4547 sense_buf[15] = failing_lba & 0x000000ff;
4549 failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo);
4551 sense_buf[16] = (failing_lba & 0xff000000) >> 24;
4552 sense_buf[17] = (failing_lba & 0x00ff0000) >> 16;
4553 sense_buf[18] = (failing_lba & 0x0000ff00) >> 8;
4554 sense_buf[19] = failing_lba & 0x000000ff;
4555 } else {
4556 sense_buf[0] = 0x70;
4557 sense_buf[2] = IPR_IOASC_SENSE_KEY(ioasc);
4558 sense_buf[12] = IPR_IOASC_SENSE_CODE(ioasc);
4559 sense_buf[13] = IPR_IOASC_SENSE_QUAL(ioasc);
4561 /* Illegal request */
4562 if ((IPR_IOASC_SENSE_KEY(ioasc) == 0x05) &&
4563 (be32_to_cpu(ioasa->ioasc_specific) & IPR_FIELD_POINTER_VALID)) {
4564 sense_buf[7] = 10; /* additional length */
4566 /* IOARCB was in error */
4567 if (IPR_IOASC_SENSE_CODE(ioasc) == 0x24)
4568 sense_buf[15] = 0xC0;
4569 else /* Parameter data was invalid */
4570 sense_buf[15] = 0x80;
4572 sense_buf[16] =
4573 ((IPR_FIELD_POINTER_MASK &
4574 be32_to_cpu(ioasa->ioasc_specific)) >> 8) & 0xff;
4575 sense_buf[17] =
4576 (IPR_FIELD_POINTER_MASK &
4577 be32_to_cpu(ioasa->ioasc_specific)) & 0xff;
4578 } else {
4579 if (ioasc == IPR_IOASC_MED_DO_NOT_REALLOC) {
4580 if (ipr_is_vset_device(res))
4581 failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo);
4582 else
4583 failing_lba = be32_to_cpu(ioasa->u.dasd.failing_lba);
4585 sense_buf[0] |= 0x80; /* Or in the Valid bit */
4586 sense_buf[3] = (failing_lba & 0xff000000) >> 24;
4587 sense_buf[4] = (failing_lba & 0x00ff0000) >> 16;
4588 sense_buf[5] = (failing_lba & 0x0000ff00) >> 8;
4589 sense_buf[6] = failing_lba & 0x000000ff;
4592 sense_buf[7] = 6; /* additional length */
4598 * ipr_get_autosense - Copy autosense data to sense buffer
4599 * @ipr_cmd: ipr command struct
4601 * This function copies the autosense buffer to the buffer
4602 * in the scsi_cmd, if there is autosense available.
4604 * Return value:
4605 * 1 if autosense was available / 0 if not
4607 static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd)
4609 struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
4611 if ((be32_to_cpu(ioasa->ioasc_specific) & IPR_AUTOSENSE_VALID) == 0)
4612 return 0;
4614 memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data,
4615 min_t(u16, be16_to_cpu(ioasa->auto_sense.auto_sense_len),
4616 SCSI_SENSE_BUFFERSIZE));
4617 return 1;
4621 * ipr_erp_start - Process an error response for a SCSI op
4622 * @ioa_cfg: ioa config struct
4623 * @ipr_cmd: ipr command struct
4625 * This function determines whether or not to initiate ERP
4626 * on the affected device.
4628 * Return value:
4629 * nothing
4631 static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg,
4632 struct ipr_cmnd *ipr_cmd)
4634 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
4635 struct ipr_resource_entry *res = scsi_cmd->device->hostdata;
4636 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4638 if (!res) {
4639 ipr_scsi_eh_done(ipr_cmd);
4640 return;
4643 if (ipr_is_gscsi(res))
4644 ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
4645 else
4646 ipr_gen_sense(ipr_cmd);
4648 switch (ioasc & IPR_IOASC_IOASC_MASK) {
4649 case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST:
4650 if (ipr_is_naca_model(res))
4651 scsi_cmd->result |= (DID_ABORT << 16);
4652 else
4653 scsi_cmd->result |= (DID_IMM_RETRY << 16);
4654 break;
4655 case IPR_IOASC_IR_RESOURCE_HANDLE:
4656 case IPR_IOASC_IR_NO_CMDS_TO_2ND_IOA:
4657 scsi_cmd->result |= (DID_NO_CONNECT << 16);
4658 break;
4659 case IPR_IOASC_HW_SEL_TIMEOUT:
4660 scsi_cmd->result |= (DID_NO_CONNECT << 16);
4661 if (!ipr_is_naca_model(res))
4662 res->needs_sync_complete = 1;
4663 break;
4664 case IPR_IOASC_SYNC_REQUIRED:
4665 if (!res->in_erp)
4666 res->needs_sync_complete = 1;
4667 scsi_cmd->result |= (DID_IMM_RETRY << 16);
4668 break;
4669 case IPR_IOASC_MED_DO_NOT_REALLOC: /* prevent retries */
4670 case IPR_IOASA_IR_DUAL_IOA_DISABLED:
4671 scsi_cmd->result |= (DID_PASSTHROUGH << 16);
4672 break;
4673 case IPR_IOASC_BUS_WAS_RESET:
4674 case IPR_IOASC_BUS_WAS_RESET_BY_OTHER:
4676 * Report the bus reset and ask for a retry. The device
4677 * will give CC/UA the next command.
4679 if (!res->resetting_device)
4680 scsi_report_bus_reset(ioa_cfg->host, scsi_cmd->device->channel);
4681 scsi_cmd->result |= (DID_ERROR << 16);
4682 if (!ipr_is_naca_model(res))
4683 res->needs_sync_complete = 1;
4684 break;
4685 case IPR_IOASC_HW_DEV_BUS_STATUS:
4686 scsi_cmd->result |= IPR_IOASC_SENSE_STATUS(ioasc);
4687 if (IPR_IOASC_SENSE_STATUS(ioasc) == SAM_STAT_CHECK_CONDITION) {
4688 if (!ipr_get_autosense(ipr_cmd)) {
4689 if (!ipr_is_naca_model(res)) {
4690 ipr_erp_cancel_all(ipr_cmd);
4691 return;
4695 if (!ipr_is_naca_model(res))
4696 res->needs_sync_complete = 1;
4697 break;
4698 case IPR_IOASC_NR_INIT_CMD_REQUIRED:
4699 break;
4700 default:
4701 if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
4702 scsi_cmd->result |= (DID_ERROR << 16);
4703 if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res))
4704 res->needs_sync_complete = 1;
4705 break;
4708 ipr_unmap_sglist(ioa_cfg, ipr_cmd);
4709 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4710 scsi_cmd->scsi_done(scsi_cmd);
4714 * ipr_scsi_done - mid-layer done function
4715 * @ipr_cmd: ipr command struct
4717 * This function is invoked by the interrupt handler for
4718 * ops generated by the SCSI mid-layer
4720 * Return value:
4721 * none
4723 static void ipr_scsi_done(struct ipr_cmnd *ipr_cmd)
4725 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
4726 struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd;
4727 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
4729 scsi_cmd->resid = be32_to_cpu(ipr_cmd->ioasa.residual_data_len);
4731 if (likely(IPR_IOASC_SENSE_KEY(ioasc) == 0)) {
4732 ipr_unmap_sglist(ioa_cfg, ipr_cmd);
4733 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4734 scsi_cmd->scsi_done(scsi_cmd);
4735 } else
4736 ipr_erp_start(ioa_cfg, ipr_cmd);
4740 * ipr_queuecommand - Queue a mid-layer request
4741 * @scsi_cmd: scsi command struct
4742 * @done: done function
4744 * This function queues a request generated by the mid-layer.
4746 * Return value:
4747 * 0 on success
4748 * SCSI_MLQUEUE_DEVICE_BUSY if device is busy
4749 * SCSI_MLQUEUE_HOST_BUSY if host is busy
4751 static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
4752 void (*done) (struct scsi_cmnd *))
4754 struct ipr_ioa_cfg *ioa_cfg;
4755 struct ipr_resource_entry *res;
4756 struct ipr_ioarcb *ioarcb;
4757 struct ipr_cmnd *ipr_cmd;
4758 int rc = 0;
4760 scsi_cmd->scsi_done = done;
4761 ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata;
4762 res = scsi_cmd->device->hostdata;
4763 scsi_cmd->result = (DID_OK << 16);
4766 * We are currently blocking all devices due to a host reset
4767 * We have told the host to stop giving us new requests, but
4768 * ERP ops don't count. FIXME
4770 if (unlikely(!ioa_cfg->allow_cmds && !ioa_cfg->ioa_is_dead))
4771 return SCSI_MLQUEUE_HOST_BUSY;
4774 * FIXME - Create scsi_set_host_offline interface
4775 * and the ioa_is_dead check can be removed
4777 if (unlikely(ioa_cfg->ioa_is_dead || !res)) {
4778 memset(scsi_cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
4779 scsi_cmd->result = (DID_NO_CONNECT << 16);
4780 scsi_cmd->scsi_done(scsi_cmd);
4781 return 0;
4784 if (ipr_is_gata(res) && res->sata_port)
4785 return ata_sas_queuecmd(scsi_cmd, done, res->sata_port->ap);
4787 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
4788 ioarcb = &ipr_cmd->ioarcb;
4789 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
4791 memcpy(ioarcb->cmd_pkt.cdb, scsi_cmd->cmnd, scsi_cmd->cmd_len);
4792 ipr_cmd->scsi_cmd = scsi_cmd;
4793 ioarcb->res_handle = res->cfgte.res_handle;
4794 ipr_cmd->done = ipr_scsi_done;
4795 ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_PHYS_LOC(res->cfgte.res_addr));
4797 if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
4798 if (scsi_cmd->underflow == 0)
4799 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
4801 if (res->needs_sync_complete) {
4802 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_SYNC_COMPLETE;
4803 res->needs_sync_complete = 0;
4806 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
4807 ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
4808 ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
4809 ioarcb->cmd_pkt.flags_lo |= ipr_get_task_attributes(scsi_cmd);
4812 if (scsi_cmd->cmnd[0] >= 0xC0 &&
4813 (!ipr_is_gscsi(res) || scsi_cmd->cmnd[0] == IPR_QUERY_RSRC_STATE))
4814 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
4816 if (likely(rc == 0))
4817 rc = ipr_build_ioadl(ioa_cfg, ipr_cmd);
4819 if (likely(rc == 0)) {
4820 mb();
4821 writel(be32_to_cpu(ipr_cmd->ioarcb.ioarcb_host_pci_addr),
4822 ioa_cfg->regs.ioarrin_reg);
4823 } else {
4824 list_move_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
4825 return SCSI_MLQUEUE_HOST_BUSY;
4828 return 0;
4832 * ipr_ioctl - IOCTL handler
4833 * @sdev: scsi device struct
4834 * @cmd: IOCTL cmd
4835 * @arg: IOCTL arg
4837 * Return value:
4838 * 0 on success / other on failure
4840 int ipr_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
4842 struct ipr_resource_entry *res;
4844 res = (struct ipr_resource_entry *)sdev->hostdata;
4845 if (res && ipr_is_gata(res))
4846 return ata_scsi_ioctl(sdev, cmd, arg);
4848 return -EINVAL;
4852 * ipr_info - Get information about the card/driver
4853 * @scsi_host: scsi host struct
4855 * Return value:
4856 * pointer to buffer with description string
4858 static const char * ipr_ioa_info(struct Scsi_Host *host)
4860 static char buffer[512];
4861 struct ipr_ioa_cfg *ioa_cfg;
4862 unsigned long lock_flags = 0;
4864 ioa_cfg = (struct ipr_ioa_cfg *) host->hostdata;
4866 spin_lock_irqsave(host->host_lock, lock_flags);
4867 sprintf(buffer, "IBM %X Storage Adapter", ioa_cfg->type);
4868 spin_unlock_irqrestore(host->host_lock, lock_flags);
4870 return buffer;
4873 static struct scsi_host_template driver_template = {
4874 .module = THIS_MODULE,
4875 .name = "IPR",
4876 .info = ipr_ioa_info,
4877 .ioctl = ipr_ioctl,
4878 .queuecommand = ipr_queuecommand,
4879 .eh_abort_handler = ipr_eh_abort,
4880 .eh_device_reset_handler = ipr_eh_dev_reset,
4881 .eh_host_reset_handler = ipr_eh_host_reset,
4882 .slave_alloc = ipr_slave_alloc,
4883 .slave_configure = ipr_slave_configure,
4884 .slave_destroy = ipr_slave_destroy,
4885 .target_alloc = ipr_target_alloc,
4886 .target_destroy = ipr_target_destroy,
4887 .change_queue_depth = ipr_change_queue_depth,
4888 .change_queue_type = ipr_change_queue_type,
4889 .bios_param = ipr_biosparam,
4890 .can_queue = IPR_MAX_COMMANDS,
4891 .this_id = -1,
4892 .sg_tablesize = IPR_MAX_SGLIST,
4893 .max_sectors = IPR_IOA_MAX_SECTORS,
4894 .cmd_per_lun = IPR_MAX_CMD_PER_LUN,
4895 .use_clustering = ENABLE_CLUSTERING,
4896 .shost_attrs = ipr_ioa_attrs,
4897 .sdev_attrs = ipr_dev_attrs,
4898 .proc_name = IPR_NAME
4902 * ipr_ata_phy_reset - libata phy_reset handler
4903 * @ap: ata port to reset
4906 static void ipr_ata_phy_reset(struct ata_port *ap)
4908 unsigned long flags;
4909 struct ipr_sata_port *sata_port = ap->private_data;
4910 struct ipr_resource_entry *res = sata_port->res;
4911 struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
4912 int rc;
4914 ENTER;
4915 spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
4916 while(ioa_cfg->in_reset_reload) {
4917 spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
4918 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
4919 spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
4922 if (!ioa_cfg->allow_cmds)
4923 goto out_unlock;
4925 rc = ipr_device_reset(ioa_cfg, res);
4927 if (rc) {
4928 ap->ops->port_disable(ap);
4929 goto out_unlock;
4932 switch(res->cfgte.proto) {
4933 case IPR_PROTO_SATA:
4934 case IPR_PROTO_SAS_STP:
4935 ap->device[0].class = ATA_DEV_ATA;
4936 break;
4937 case IPR_PROTO_SATA_ATAPI:
4938 case IPR_PROTO_SAS_STP_ATAPI:
4939 ap->device[0].class = ATA_DEV_ATAPI;
4940 break;
4941 default:
4942 ap->device[0].class = ATA_DEV_UNKNOWN;
4943 ap->ops->port_disable(ap);
4944 break;
4947 out_unlock:
4948 spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
4949 LEAVE;
4953 * ipr_ata_post_internal - Cleanup after an internal command
4954 * @qc: ATA queued command
4956 * Return value:
4957 * none
4959 static void ipr_ata_post_internal(struct ata_queued_cmd *qc)
4961 struct ipr_sata_port *sata_port = qc->ap->private_data;
4962 struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
4963 struct ipr_cmnd *ipr_cmd;
4964 unsigned long flags;
4966 spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
4967 while(ioa_cfg->in_reset_reload) {
4968 spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
4969 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
4970 spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
4973 list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
4974 if (ipr_cmd->qc == qc) {
4975 ipr_device_reset(ioa_cfg, sata_port->res);
4976 break;
4979 spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
4983 * ipr_tf_read - Read the current ATA taskfile for the ATA port
4984 * @ap: ATA port
4985 * @tf: destination ATA taskfile
4987 * Return value:
4988 * none
4990 static void ipr_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
4992 struct ipr_sata_port *sata_port = ap->private_data;
4993 struct ipr_ioasa_gata *g = &sata_port->ioasa;
4995 tf->feature = g->error;
4996 tf->nsect = g->nsect;
4997 tf->lbal = g->lbal;
4998 tf->lbam = g->lbam;
4999 tf->lbah = g->lbah;
5000 tf->device = g->device;
5001 tf->command = g->status;
5002 tf->hob_nsect = g->hob_nsect;
5003 tf->hob_lbal = g->hob_lbal;
5004 tf->hob_lbam = g->hob_lbam;
5005 tf->hob_lbah = g->hob_lbah;
5006 tf->ctl = g->alt_status;
5010 * ipr_copy_sata_tf - Copy a SATA taskfile to an IOA data structure
5011 * @regs: destination
5012 * @tf: source ATA taskfile
5014 * Return value:
5015 * none
5017 static void ipr_copy_sata_tf(struct ipr_ioarcb_ata_regs *regs,
5018 struct ata_taskfile *tf)
5020 regs->feature = tf->feature;
5021 regs->nsect = tf->nsect;
5022 regs->lbal = tf->lbal;
5023 regs->lbam = tf->lbam;
5024 regs->lbah = tf->lbah;
5025 regs->device = tf->device;
5026 regs->command = tf->command;
5027 regs->hob_feature = tf->hob_feature;
5028 regs->hob_nsect = tf->hob_nsect;
5029 regs->hob_lbal = tf->hob_lbal;
5030 regs->hob_lbam = tf->hob_lbam;
5031 regs->hob_lbah = tf->hob_lbah;
5032 regs->ctl = tf->ctl;
5036 * ipr_sata_done - done function for SATA commands
5037 * @ipr_cmd: ipr command struct
5039 * This function is invoked by the interrupt handler for
5040 * ops generated by the SCSI mid-layer to SATA devices
5042 * Return value:
5043 * none
5045 static void ipr_sata_done(struct ipr_cmnd *ipr_cmd)
5047 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5048 struct ata_queued_cmd *qc = ipr_cmd->qc;
5049 struct ipr_sata_port *sata_port = qc->ap->private_data;
5050 struct ipr_resource_entry *res = sata_port->res;
5051 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
5053 memcpy(&sata_port->ioasa, &ipr_cmd->ioasa.u.gata,
5054 sizeof(struct ipr_ioasa_gata));
5055 ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
5057 if (be32_to_cpu(ipr_cmd->ioasa.ioasc_specific) & IPR_ATA_DEVICE_WAS_RESET)
5058 scsi_report_device_reset(ioa_cfg->host, res->cfgte.res_addr.bus,
5059 res->cfgte.res_addr.target);
5061 if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR)
5062 qc->err_mask |= __ac_err_mask(ipr_cmd->ioasa.u.gata.status);
5063 else
5064 qc->err_mask |= ac_err_mask(ipr_cmd->ioasa.u.gata.status);
5065 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5066 ata_qc_complete(qc);
5070 * ipr_build_ata_ioadl - Build an ATA scatter/gather list
5071 * @ipr_cmd: ipr command struct
5072 * @qc: ATA queued command
5075 static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
5076 struct ata_queued_cmd *qc)
5078 u32 ioadl_flags = 0;
5079 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5080 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5081 int len = qc->nbytes + qc->pad_len;
5082 struct scatterlist *sg;
5084 if (len == 0)
5085 return;
5087 if (qc->dma_dir == DMA_TO_DEVICE) {
5088 ioadl_flags = IPR_IOADL_FLAGS_WRITE;
5089 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
5090 ioarcb->write_data_transfer_length = cpu_to_be32(len);
5091 ioarcb->write_ioadl_len =
5092 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
5093 } else if (qc->dma_dir == DMA_FROM_DEVICE) {
5094 ioadl_flags = IPR_IOADL_FLAGS_READ;
5095 ioarcb->read_data_transfer_length = cpu_to_be32(len);
5096 ioarcb->read_ioadl_len =
5097 cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
5100 ata_for_each_sg(sg, qc) {
5101 ioadl->flags_and_data_len = cpu_to_be32(ioadl_flags | sg_dma_len(sg));
5102 ioadl->address = cpu_to_be32(sg_dma_address(sg));
5103 if (ata_sg_is_last(sg, qc))
5104 ioadl->flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
5105 else
5106 ioadl++;
5111 * ipr_qc_issue - Issue a SATA qc to a device
5112 * @qc: queued command
5114 * Return value:
5115 * 0 if success
5117 static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc)
5119 struct ata_port *ap = qc->ap;
5120 struct ipr_sata_port *sata_port = ap->private_data;
5121 struct ipr_resource_entry *res = sata_port->res;
5122 struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;
5123 struct ipr_cmnd *ipr_cmd;
5124 struct ipr_ioarcb *ioarcb;
5125 struct ipr_ioarcb_ata_regs *regs;
5127 if (unlikely(!ioa_cfg->allow_cmds || ioa_cfg->ioa_is_dead))
5128 return -EIO;
5130 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
5131 ioarcb = &ipr_cmd->ioarcb;
5132 regs = &ioarcb->add_data.u.regs;
5134 memset(&ioarcb->add_data, 0, sizeof(ioarcb->add_data));
5135 ioarcb->add_cmd_parms_len = cpu_to_be32(sizeof(ioarcb->add_data.u.regs));
5137 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
5138 ipr_cmd->qc = qc;
5139 ipr_cmd->done = ipr_sata_done;
5140 ipr_cmd->ioarcb.res_handle = res->cfgte.res_handle;
5141 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_ATA_PASSTHRU;
5142 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
5143 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
5144 ipr_cmd->dma_use_sg = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
5146 ipr_build_ata_ioadl(ipr_cmd, qc);
5147 regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
5148 ipr_copy_sata_tf(regs, &qc->tf);
5149 memcpy(ioarcb->cmd_pkt.cdb, qc->cdb, IPR_MAX_CDB_LEN);
5150 ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_PHYS_LOC(res->cfgte.res_addr));
5152 switch (qc->tf.protocol) {
5153 case ATA_PROT_NODATA:
5154 case ATA_PROT_PIO:
5155 break;
5157 case ATA_PROT_DMA:
5158 regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA;
5159 break;
5161 case ATA_PROT_ATAPI:
5162 case ATA_PROT_ATAPI_NODATA:
5163 regs->flags |= IPR_ATA_FLAG_PACKET_CMD;
5164 break;
5166 case ATA_PROT_ATAPI_DMA:
5167 regs->flags |= IPR_ATA_FLAG_PACKET_CMD;
5168 regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA;
5169 break;
5171 default:
5172 WARN_ON(1);
5173 return -1;
5176 mb();
5177 writel(be32_to_cpu(ioarcb->ioarcb_host_pci_addr),
5178 ioa_cfg->regs.ioarrin_reg);
5179 return 0;
5183 * ipr_ata_check_status - Return last ATA status
5184 * @ap: ATA port
5186 * Return value:
5187 * ATA status
5189 static u8 ipr_ata_check_status(struct ata_port *ap)
5191 struct ipr_sata_port *sata_port = ap->private_data;
5192 return sata_port->ioasa.status;
5196 * ipr_ata_check_altstatus - Return last ATA altstatus
5197 * @ap: ATA port
5199 * Return value:
5200 * Alt ATA status
5202 static u8 ipr_ata_check_altstatus(struct ata_port *ap)
5204 struct ipr_sata_port *sata_port = ap->private_data;
5205 return sata_port->ioasa.alt_status;
5208 static struct ata_port_operations ipr_sata_ops = {
5209 .port_disable = ata_port_disable,
5210 .check_status = ipr_ata_check_status,
5211 .check_altstatus = ipr_ata_check_altstatus,
5212 .dev_select = ata_noop_dev_select,
5213 .phy_reset = ipr_ata_phy_reset,
5214 .post_internal_cmd = ipr_ata_post_internal,
5215 .tf_read = ipr_tf_read,
5216 .qc_prep = ata_noop_qc_prep,
5217 .qc_issue = ipr_qc_issue,
5218 .port_start = ata_sas_port_start,
5219 .port_stop = ata_sas_port_stop
5222 static struct ata_port_info sata_port_info = {
5223 .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET |
5224 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
5225 .pio_mask = 0x10, /* pio4 */
5226 .mwdma_mask = 0x07,
5227 .udma_mask = 0x7f, /* udma0-6 */
5228 .port_ops = &ipr_sata_ops
5231 #ifdef CONFIG_PPC_PSERIES
5232 static const u16 ipr_blocked_processors[] = {
5233 PV_NORTHSTAR,
5234 PV_PULSAR,
5235 PV_POWER4,
5236 PV_ICESTAR,
5237 PV_SSTAR,
5238 PV_POWER4p,
5239 PV_630,
5240 PV_630p
5244 * ipr_invalid_adapter - Determine if this adapter is supported on this hardware
5245 * @ioa_cfg: ioa cfg struct
5247 * Adapters that use Gemstone revision < 3.1 do not work reliably on
5248 * certain pSeries hardware. This function determines if the given
5249 * adapter is in one of these confgurations or not.
5251 * Return value:
5252 * 1 if adapter is not supported / 0 if adapter is supported
5254 static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg)
5256 u8 rev_id;
5257 int i;
5259 if (ioa_cfg->type == 0x5702) {
5260 if (pci_read_config_byte(ioa_cfg->pdev, PCI_REVISION_ID,
5261 &rev_id) == PCIBIOS_SUCCESSFUL) {
5262 if (rev_id < 4) {
5263 for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
5264 if (__is_processor(ipr_blocked_processors[i]))
5265 return 1;
5270 return 0;
5272 #else
5273 #define ipr_invalid_adapter(ioa_cfg) 0
5274 #endif
5277 * ipr_ioa_bringdown_done - IOA bring down completion.
5278 * @ipr_cmd: ipr command struct
5280 * This function processes the completion of an adapter bring down.
5281 * It wakes any reset sleepers.
5283 * Return value:
5284 * IPR_RC_JOB_RETURN
5286 static int ipr_ioa_bringdown_done(struct ipr_cmnd *ipr_cmd)
5288 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5290 ENTER;
5291 ioa_cfg->in_reset_reload = 0;
5292 ioa_cfg->reset_retries = 0;
5293 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5294 wake_up_all(&ioa_cfg->reset_wait_q);
5296 spin_unlock_irq(ioa_cfg->host->host_lock);
5297 scsi_unblock_requests(ioa_cfg->host);
5298 spin_lock_irq(ioa_cfg->host->host_lock);
5299 LEAVE;
5301 return IPR_RC_JOB_RETURN;
5305 * ipr_ioa_reset_done - IOA reset completion.
5306 * @ipr_cmd: ipr command struct
5308 * This function processes the completion of an adapter reset.
5309 * It schedules any necessary mid-layer add/removes and
5310 * wakes any reset sleepers.
5312 * Return value:
5313 * IPR_RC_JOB_RETURN
5315 static int ipr_ioa_reset_done(struct ipr_cmnd *ipr_cmd)
5317 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5318 struct ipr_resource_entry *res;
5319 struct ipr_hostrcb *hostrcb, *temp;
5320 int i = 0;
5322 ENTER;
5323 ioa_cfg->in_reset_reload = 0;
5324 ioa_cfg->allow_cmds = 1;
5325 ioa_cfg->reset_cmd = NULL;
5326 ioa_cfg->doorbell |= IPR_RUNTIME_RESET;
5328 list_for_each_entry(res, &ioa_cfg->used_res_q, queue) {
5329 if (ioa_cfg->allow_ml_add_del && (res->add_to_ml || res->del_from_ml)) {
5330 ipr_trace;
5331 break;
5334 schedule_work(&ioa_cfg->work_q);
5336 list_for_each_entry_safe(hostrcb, temp, &ioa_cfg->hostrcb_free_q, queue) {
5337 list_del(&hostrcb->queue);
5338 if (i++ < IPR_NUM_LOG_HCAMS)
5339 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb);
5340 else
5341 ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb);
5344 dev_info(&ioa_cfg->pdev->dev, "IOA initialized.\n");
5346 ioa_cfg->reset_retries = 0;
5347 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5348 wake_up_all(&ioa_cfg->reset_wait_q);
5350 spin_unlock_irq(ioa_cfg->host->host_lock);
5351 scsi_unblock_requests(ioa_cfg->host);
5352 spin_lock_irq(ioa_cfg->host->host_lock);
5354 if (!ioa_cfg->allow_cmds)
5355 scsi_block_requests(ioa_cfg->host);
5357 LEAVE;
5358 return IPR_RC_JOB_RETURN;
5362 * ipr_set_sup_dev_dflt - Initialize a Set Supported Device buffer
5363 * @supported_dev: supported device struct
5364 * @vpids: vendor product id struct
5366 * Return value:
5367 * none
5369 static void ipr_set_sup_dev_dflt(struct ipr_supported_device *supported_dev,
5370 struct ipr_std_inq_vpids *vpids)
5372 memset(supported_dev, 0, sizeof(struct ipr_supported_device));
5373 memcpy(&supported_dev->vpids, vpids, sizeof(struct ipr_std_inq_vpids));
5374 supported_dev->num_records = 1;
5375 supported_dev->data_length =
5376 cpu_to_be16(sizeof(struct ipr_supported_device));
5377 supported_dev->reserved = 0;
5381 * ipr_set_supported_devs - Send Set Supported Devices for a device
5382 * @ipr_cmd: ipr command struct
5384 * This function send a Set Supported Devices to the adapter
5386 * Return value:
5387 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5389 static int ipr_set_supported_devs(struct ipr_cmnd *ipr_cmd)
5391 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5392 struct ipr_supported_device *supp_dev = &ioa_cfg->vpd_cbs->supp_dev;
5393 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5394 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5395 struct ipr_resource_entry *res = ipr_cmd->u.res;
5397 ipr_cmd->job_step = ipr_ioa_reset_done;
5399 list_for_each_entry_continue(res, &ioa_cfg->used_res_q, queue) {
5400 if (!ipr_is_scsi_disk(res))
5401 continue;
5403 ipr_cmd->u.res = res;
5404 ipr_set_sup_dev_dflt(supp_dev, &res->cfgte.std_inq_data.vpids);
5406 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5407 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
5408 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
5410 ioarcb->cmd_pkt.cdb[0] = IPR_SET_SUPPORTED_DEVICES;
5411 ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_supported_device) >> 8) & 0xff;
5412 ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_supported_device) & 0xff;
5414 ioadl->flags_and_data_len = cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST |
5415 sizeof(struct ipr_supported_device));
5416 ioadl->address = cpu_to_be32(ioa_cfg->vpd_cbs_dma +
5417 offsetof(struct ipr_misc_cbs, supp_dev));
5418 ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5419 ioarcb->write_data_transfer_length =
5420 cpu_to_be32(sizeof(struct ipr_supported_device));
5422 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
5423 IPR_SET_SUP_DEVICE_TIMEOUT);
5425 ipr_cmd->job_step = ipr_set_supported_devs;
5426 return IPR_RC_JOB_RETURN;
5429 return IPR_RC_JOB_CONTINUE;
5433 * ipr_setup_write_cache - Disable write cache if needed
5434 * @ipr_cmd: ipr command struct
5436 * This function sets up adapters write cache to desired setting
5438 * Return value:
5439 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5441 static int ipr_setup_write_cache(struct ipr_cmnd *ipr_cmd)
5443 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5445 ipr_cmd->job_step = ipr_set_supported_devs;
5446 ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next,
5447 struct ipr_resource_entry, queue);
5449 if (ioa_cfg->cache_state != CACHE_DISABLED)
5450 return IPR_RC_JOB_CONTINUE;
5452 ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5453 ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
5454 ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN;
5455 ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_SHUTDOWN_PREPARE_FOR_NORMAL;
5457 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5459 return IPR_RC_JOB_RETURN;
5463 * ipr_get_mode_page - Locate specified mode page
5464 * @mode_pages: mode page buffer
5465 * @page_code: page code to find
5466 * @len: minimum required length for mode page
5468 * Return value:
5469 * pointer to mode page / NULL on failure
5471 static void *ipr_get_mode_page(struct ipr_mode_pages *mode_pages,
5472 u32 page_code, u32 len)
5474 struct ipr_mode_page_hdr *mode_hdr;
5475 u32 page_length;
5476 u32 length;
5478 if (!mode_pages || (mode_pages->hdr.length == 0))
5479 return NULL;
5481 length = (mode_pages->hdr.length + 1) - 4 - mode_pages->hdr.block_desc_len;
5482 mode_hdr = (struct ipr_mode_page_hdr *)
5483 (mode_pages->data + mode_pages->hdr.block_desc_len);
5485 while (length) {
5486 if (IPR_GET_MODE_PAGE_CODE(mode_hdr) == page_code) {
5487 if (mode_hdr->page_length >= (len - sizeof(struct ipr_mode_page_hdr)))
5488 return mode_hdr;
5489 break;
5490 } else {
5491 page_length = (sizeof(struct ipr_mode_page_hdr) +
5492 mode_hdr->page_length);
5493 length -= page_length;
5494 mode_hdr = (struct ipr_mode_page_hdr *)
5495 ((unsigned long)mode_hdr + page_length);
5498 return NULL;
5502 * ipr_check_term_power - Check for term power errors
5503 * @ioa_cfg: ioa config struct
5504 * @mode_pages: IOAFP mode pages buffer
5506 * Check the IOAFP's mode page 28 for term power errors
5508 * Return value:
5509 * nothing
5511 static void ipr_check_term_power(struct ipr_ioa_cfg *ioa_cfg,
5512 struct ipr_mode_pages *mode_pages)
5514 int i;
5515 int entry_length;
5516 struct ipr_dev_bus_entry *bus;
5517 struct ipr_mode_page28 *mode_page;
5519 mode_page = ipr_get_mode_page(mode_pages, 0x28,
5520 sizeof(struct ipr_mode_page28));
5522 entry_length = mode_page->entry_length;
5524 bus = mode_page->bus;
5526 for (i = 0; i < mode_page->num_entries; i++) {
5527 if (bus->flags & IPR_SCSI_ATTR_NO_TERM_PWR) {
5528 dev_err(&ioa_cfg->pdev->dev,
5529 "Term power is absent on scsi bus %d\n",
5530 bus->res_addr.bus);
5533 bus = (struct ipr_dev_bus_entry *)((char *)bus + entry_length);
5538 * ipr_scsi_bus_speed_limit - Limit the SCSI speed based on SES table
5539 * @ioa_cfg: ioa config struct
5541 * Looks through the config table checking for SES devices. If
5542 * the SES device is in the SES table indicating a maximum SCSI
5543 * bus speed, the speed is limited for the bus.
5545 * Return value:
5546 * none
5548 static void ipr_scsi_bus_speed_limit(struct ipr_ioa_cfg *ioa_cfg)
5550 u32 max_xfer_rate;
5551 int i;
5553 for (i = 0; i < IPR_MAX_NUM_BUSES; i++) {
5554 max_xfer_rate = ipr_get_max_scsi_speed(ioa_cfg, i,
5555 ioa_cfg->bus_attr[i].bus_width);
5557 if (max_xfer_rate < ioa_cfg->bus_attr[i].max_xfer_rate)
5558 ioa_cfg->bus_attr[i].max_xfer_rate = max_xfer_rate;
5563 * ipr_modify_ioafp_mode_page_28 - Modify IOAFP Mode Page 28
5564 * @ioa_cfg: ioa config struct
5565 * @mode_pages: mode page 28 buffer
5567 * Updates mode page 28 based on driver configuration
5569 * Return value:
5570 * none
5572 static void ipr_modify_ioafp_mode_page_28(struct ipr_ioa_cfg *ioa_cfg,
5573 struct ipr_mode_pages *mode_pages)
5575 int i, entry_length;
5576 struct ipr_dev_bus_entry *bus;
5577 struct ipr_bus_attributes *bus_attr;
5578 struct ipr_mode_page28 *mode_page;
5580 mode_page = ipr_get_mode_page(mode_pages, 0x28,
5581 sizeof(struct ipr_mode_page28));
5583 entry_length = mode_page->entry_length;
5585 /* Loop for each device bus entry */
5586 for (i = 0, bus = mode_page->bus;
5587 i < mode_page->num_entries;
5588 i++, bus = (struct ipr_dev_bus_entry *)((u8 *)bus + entry_length)) {
5589 if (bus->res_addr.bus > IPR_MAX_NUM_BUSES) {
5590 dev_err(&ioa_cfg->pdev->dev,
5591 "Invalid resource address reported: 0x%08X\n",
5592 IPR_GET_PHYS_LOC(bus->res_addr));
5593 continue;
5596 bus_attr = &ioa_cfg->bus_attr[i];
5597 bus->extended_reset_delay = IPR_EXTENDED_RESET_DELAY;
5598 bus->bus_width = bus_attr->bus_width;
5599 bus->max_xfer_rate = cpu_to_be32(bus_attr->max_xfer_rate);
5600 bus->flags &= ~IPR_SCSI_ATTR_QAS_MASK;
5601 if (bus_attr->qas_enabled)
5602 bus->flags |= IPR_SCSI_ATTR_ENABLE_QAS;
5603 else
5604 bus->flags |= IPR_SCSI_ATTR_DISABLE_QAS;
5609 * ipr_build_mode_select - Build a mode select command
5610 * @ipr_cmd: ipr command struct
5611 * @res_handle: resource handle to send command to
5612 * @parm: Byte 2 of Mode Sense command
5613 * @dma_addr: DMA buffer address
5614 * @xfer_len: data transfer length
5616 * Return value:
5617 * none
5619 static void ipr_build_mode_select(struct ipr_cmnd *ipr_cmd,
5620 __be32 res_handle, u8 parm, u32 dma_addr,
5621 u8 xfer_len)
5623 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5624 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5626 ioarcb->res_handle = res_handle;
5627 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
5628 ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ;
5629 ioarcb->cmd_pkt.cdb[0] = MODE_SELECT;
5630 ioarcb->cmd_pkt.cdb[1] = parm;
5631 ioarcb->cmd_pkt.cdb[4] = xfer_len;
5633 ioadl->flags_and_data_len =
5634 cpu_to_be32(IPR_IOADL_FLAGS_WRITE_LAST | xfer_len);
5635 ioadl->address = cpu_to_be32(dma_addr);
5636 ioarcb->write_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5637 ioarcb->write_data_transfer_length = cpu_to_be32(xfer_len);
5641 * ipr_ioafp_mode_select_page28 - Issue Mode Select Page 28 to IOA
5642 * @ipr_cmd: ipr command struct
5644 * This function sets up the SCSI bus attributes and sends
5645 * a Mode Select for Page 28 to activate them.
5647 * Return value:
5648 * IPR_RC_JOB_RETURN
5650 static int ipr_ioafp_mode_select_page28(struct ipr_cmnd *ipr_cmd)
5652 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5653 struct ipr_mode_pages *mode_pages = &ioa_cfg->vpd_cbs->mode_pages;
5654 int length;
5656 ENTER;
5657 ipr_scsi_bus_speed_limit(ioa_cfg);
5658 ipr_check_term_power(ioa_cfg, mode_pages);
5659 ipr_modify_ioafp_mode_page_28(ioa_cfg, mode_pages);
5660 length = mode_pages->hdr.length + 1;
5661 mode_pages->hdr.length = 0;
5663 ipr_build_mode_select(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), 0x11,
5664 ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages),
5665 length);
5667 ipr_cmd->job_step = ipr_setup_write_cache;
5668 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5670 LEAVE;
5671 return IPR_RC_JOB_RETURN;
5675 * ipr_build_mode_sense - Builds a mode sense command
5676 * @ipr_cmd: ipr command struct
5677 * @res: resource entry struct
5678 * @parm: Byte 2 of mode sense command
5679 * @dma_addr: DMA address of mode sense buffer
5680 * @xfer_len: Size of DMA buffer
5682 * Return value:
5683 * none
5685 static void ipr_build_mode_sense(struct ipr_cmnd *ipr_cmd,
5686 __be32 res_handle,
5687 u8 parm, u32 dma_addr, u8 xfer_len)
5689 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5690 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5692 ioarcb->res_handle = res_handle;
5693 ioarcb->cmd_pkt.cdb[0] = MODE_SENSE;
5694 ioarcb->cmd_pkt.cdb[2] = parm;
5695 ioarcb->cmd_pkt.cdb[4] = xfer_len;
5696 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
5698 ioadl->flags_and_data_len =
5699 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len);
5700 ioadl->address = cpu_to_be32(dma_addr);
5701 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5702 ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len);
5706 * ipr_reset_cmd_failed - Handle failure of IOA reset command
5707 * @ipr_cmd: ipr command struct
5709 * This function handles the failure of an IOA bringup command.
5711 * Return value:
5712 * IPR_RC_JOB_RETURN
5714 static int ipr_reset_cmd_failed(struct ipr_cmnd *ipr_cmd)
5716 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5717 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
5719 dev_err(&ioa_cfg->pdev->dev,
5720 "0x%02X failed with IOASC: 0x%08X\n",
5721 ipr_cmd->ioarcb.cmd_pkt.cdb[0], ioasc);
5723 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
5724 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
5725 return IPR_RC_JOB_RETURN;
5729 * ipr_reset_mode_sense_failed - Handle failure of IOAFP mode sense
5730 * @ipr_cmd: ipr command struct
5732 * This function handles the failure of a Mode Sense to the IOAFP.
5733 * Some adapters do not handle all mode pages.
5735 * Return value:
5736 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5738 static int ipr_reset_mode_sense_failed(struct ipr_cmnd *ipr_cmd)
5740 u32 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
5742 if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT) {
5743 ipr_cmd->job_step = ipr_setup_write_cache;
5744 return IPR_RC_JOB_CONTINUE;
5747 return ipr_reset_cmd_failed(ipr_cmd);
5751 * ipr_ioafp_mode_sense_page28 - Issue Mode Sense Page 28 to IOA
5752 * @ipr_cmd: ipr command struct
5754 * This function send a Page 28 mode sense to the IOA to
5755 * retrieve SCSI bus attributes.
5757 * Return value:
5758 * IPR_RC_JOB_RETURN
5760 static int ipr_ioafp_mode_sense_page28(struct ipr_cmnd *ipr_cmd)
5762 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5764 ENTER;
5765 ipr_build_mode_sense(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE),
5766 0x28, ioa_cfg->vpd_cbs_dma +
5767 offsetof(struct ipr_misc_cbs, mode_pages),
5768 sizeof(struct ipr_mode_pages));
5770 ipr_cmd->job_step = ipr_ioafp_mode_select_page28;
5771 ipr_cmd->job_step_failed = ipr_reset_mode_sense_failed;
5773 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5775 LEAVE;
5776 return IPR_RC_JOB_RETURN;
5780 * ipr_init_res_table - Initialize the resource table
5781 * @ipr_cmd: ipr command struct
5783 * This function looks through the existing resource table, comparing
5784 * it with the config table. This function will take care of old/new
5785 * devices and schedule adding/removing them from the mid-layer
5786 * as appropriate.
5788 * Return value:
5789 * IPR_RC_JOB_CONTINUE
5791 static int ipr_init_res_table(struct ipr_cmnd *ipr_cmd)
5793 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5794 struct ipr_resource_entry *res, *temp;
5795 struct ipr_config_table_entry *cfgte;
5796 int found, i;
5797 LIST_HEAD(old_res);
5799 ENTER;
5800 if (ioa_cfg->cfg_table->hdr.flags & IPR_UCODE_DOWNLOAD_REQ)
5801 dev_err(&ioa_cfg->pdev->dev, "Microcode download required\n");
5803 list_for_each_entry_safe(res, temp, &ioa_cfg->used_res_q, queue)
5804 list_move_tail(&res->queue, &old_res);
5806 for (i = 0; i < ioa_cfg->cfg_table->hdr.num_entries; i++) {
5807 cfgte = &ioa_cfg->cfg_table->dev[i];
5808 found = 0;
5810 list_for_each_entry_safe(res, temp, &old_res, queue) {
5811 if (!memcmp(&res->cfgte.res_addr,
5812 &cfgte->res_addr, sizeof(cfgte->res_addr))) {
5813 list_move_tail(&res->queue, &ioa_cfg->used_res_q);
5814 found = 1;
5815 break;
5819 if (!found) {
5820 if (list_empty(&ioa_cfg->free_res_q)) {
5821 dev_err(&ioa_cfg->pdev->dev, "Too many devices attached\n");
5822 break;
5825 found = 1;
5826 res = list_entry(ioa_cfg->free_res_q.next,
5827 struct ipr_resource_entry, queue);
5828 list_move_tail(&res->queue, &ioa_cfg->used_res_q);
5829 ipr_init_res_entry(res);
5830 res->add_to_ml = 1;
5833 if (found)
5834 memcpy(&res->cfgte, cfgte, sizeof(struct ipr_config_table_entry));
5837 list_for_each_entry_safe(res, temp, &old_res, queue) {
5838 if (res->sdev) {
5839 res->del_from_ml = 1;
5840 res->cfgte.res_handle = IPR_INVALID_RES_HANDLE;
5841 list_move_tail(&res->queue, &ioa_cfg->used_res_q);
5842 } else {
5843 list_move_tail(&res->queue, &ioa_cfg->free_res_q);
5847 ipr_cmd->job_step = ipr_ioafp_mode_sense_page28;
5849 LEAVE;
5850 return IPR_RC_JOB_CONTINUE;
5854 * ipr_ioafp_query_ioa_cfg - Send a Query IOA Config to the adapter.
5855 * @ipr_cmd: ipr command struct
5857 * This function sends a Query IOA Configuration command
5858 * to the adapter to retrieve the IOA configuration table.
5860 * Return value:
5861 * IPR_RC_JOB_RETURN
5863 static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd)
5865 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5866 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5867 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5868 struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data;
5870 ENTER;
5871 dev_info(&ioa_cfg->pdev->dev, "Adapter firmware version: %02X%02X%02X%02X\n",
5872 ucode_vpd->major_release, ucode_vpd->card_type,
5873 ucode_vpd->minor_release[0], ucode_vpd->minor_release[1]);
5874 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
5875 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5877 ioarcb->cmd_pkt.cdb[0] = IPR_QUERY_IOA_CONFIG;
5878 ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_config_table) >> 8) & 0xff;
5879 ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_config_table) & 0xff;
5881 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5882 ioarcb->read_data_transfer_length =
5883 cpu_to_be32(sizeof(struct ipr_config_table));
5885 ioadl->address = cpu_to_be32(ioa_cfg->cfg_table_dma);
5886 ioadl->flags_and_data_len =
5887 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | sizeof(struct ipr_config_table));
5889 ipr_cmd->job_step = ipr_init_res_table;
5891 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5893 LEAVE;
5894 return IPR_RC_JOB_RETURN;
5898 * ipr_ioafp_inquiry - Send an Inquiry to the adapter.
5899 * @ipr_cmd: ipr command struct
5901 * This utility function sends an inquiry to the adapter.
5903 * Return value:
5904 * none
5906 static void ipr_ioafp_inquiry(struct ipr_cmnd *ipr_cmd, u8 flags, u8 page,
5907 u32 dma_addr, u8 xfer_len)
5909 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
5910 struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
5912 ENTER;
5913 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
5914 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
5916 ioarcb->cmd_pkt.cdb[0] = INQUIRY;
5917 ioarcb->cmd_pkt.cdb[1] = flags;
5918 ioarcb->cmd_pkt.cdb[2] = page;
5919 ioarcb->cmd_pkt.cdb[4] = xfer_len;
5921 ioarcb->read_ioadl_len = cpu_to_be32(sizeof(struct ipr_ioadl_desc));
5922 ioarcb->read_data_transfer_length = cpu_to_be32(xfer_len);
5924 ioadl->address = cpu_to_be32(dma_addr);
5925 ioadl->flags_and_data_len =
5926 cpu_to_be32(IPR_IOADL_FLAGS_READ_LAST | xfer_len);
5928 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
5929 LEAVE;
5933 * ipr_inquiry_page_supported - Is the given inquiry page supported
5934 * @page0: inquiry page 0 buffer
5935 * @page: page code.
5937 * This function determines if the specified inquiry page is supported.
5939 * Return value:
5940 * 1 if page is supported / 0 if not
5942 static int ipr_inquiry_page_supported(struct ipr_inquiry_page0 *page0, u8 page)
5944 int i;
5946 for (i = 0; i < min_t(u8, page0->len, IPR_INQUIRY_PAGE0_ENTRIES); i++)
5947 if (page0->page[i] == page)
5948 return 1;
5950 return 0;
5954 * ipr_ioafp_page3_inquiry - Send a Page 3 Inquiry to the adapter.
5955 * @ipr_cmd: ipr command struct
5957 * This function sends a Page 3 inquiry to the adapter
5958 * to retrieve software VPD information.
5960 * Return value:
5961 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5963 static int ipr_ioafp_page3_inquiry(struct ipr_cmnd *ipr_cmd)
5965 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5966 struct ipr_inquiry_page0 *page0 = &ioa_cfg->vpd_cbs->page0_data;
5968 ENTER;
5970 if (!ipr_inquiry_page_supported(page0, 1))
5971 ioa_cfg->cache_state = CACHE_NONE;
5973 ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
5975 ipr_ioafp_inquiry(ipr_cmd, 1, 3,
5976 ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page3_data),
5977 sizeof(struct ipr_inquiry_page3));
5979 LEAVE;
5980 return IPR_RC_JOB_RETURN;
5984 * ipr_ioafp_page0_inquiry - Send a Page 0 Inquiry to the adapter.
5985 * @ipr_cmd: ipr command struct
5987 * This function sends a Page 0 inquiry to the adapter
5988 * to retrieve supported inquiry pages.
5990 * Return value:
5991 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
5993 static int ipr_ioafp_page0_inquiry(struct ipr_cmnd *ipr_cmd)
5995 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
5996 char type[5];
5998 ENTER;
6000 /* Grab the type out of the VPD and store it away */
6001 memcpy(type, ioa_cfg->vpd_cbs->ioa_vpd.std_inq_data.vpids.product_id, 4);
6002 type[4] = '\0';
6003 ioa_cfg->type = simple_strtoul((char *)type, NULL, 16);
6005 ipr_cmd->job_step = ipr_ioafp_page3_inquiry;
6007 ipr_ioafp_inquiry(ipr_cmd, 1, 0,
6008 ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page0_data),
6009 sizeof(struct ipr_inquiry_page0));
6011 LEAVE;
6012 return IPR_RC_JOB_RETURN;
6016 * ipr_ioafp_std_inquiry - Send a Standard Inquiry to the adapter.
6017 * @ipr_cmd: ipr command struct
6019 * This function sends a standard inquiry to the adapter.
6021 * Return value:
6022 * IPR_RC_JOB_RETURN
6024 static int ipr_ioafp_std_inquiry(struct ipr_cmnd *ipr_cmd)
6026 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6028 ENTER;
6029 ipr_cmd->job_step = ipr_ioafp_page0_inquiry;
6031 ipr_ioafp_inquiry(ipr_cmd, 0, 0,
6032 ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, ioa_vpd),
6033 sizeof(struct ipr_ioa_vpd));
6035 LEAVE;
6036 return IPR_RC_JOB_RETURN;
6040 * ipr_ioafp_indentify_hrrq - Send Identify Host RRQ.
6041 * @ipr_cmd: ipr command struct
6043 * This function send an Identify Host Request Response Queue
6044 * command to establish the HRRQ with the adapter.
6046 * Return value:
6047 * IPR_RC_JOB_RETURN
6049 static int ipr_ioafp_indentify_hrrq(struct ipr_cmnd *ipr_cmd)
6051 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6052 struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
6054 ENTER;
6055 dev_info(&ioa_cfg->pdev->dev, "Starting IOA initialization sequence.\n");
6057 ioarcb->cmd_pkt.cdb[0] = IPR_ID_HOST_RR_Q;
6058 ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
6060 ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
6061 ioarcb->cmd_pkt.cdb[2] =
6062 ((u32) ioa_cfg->host_rrq_dma >> 24) & 0xff;
6063 ioarcb->cmd_pkt.cdb[3] =
6064 ((u32) ioa_cfg->host_rrq_dma >> 16) & 0xff;
6065 ioarcb->cmd_pkt.cdb[4] =
6066 ((u32) ioa_cfg->host_rrq_dma >> 8) & 0xff;
6067 ioarcb->cmd_pkt.cdb[5] =
6068 ((u32) ioa_cfg->host_rrq_dma) & 0xff;
6069 ioarcb->cmd_pkt.cdb[7] =
6070 ((sizeof(u32) * IPR_NUM_CMD_BLKS) >> 8) & 0xff;
6071 ioarcb->cmd_pkt.cdb[8] =
6072 (sizeof(u32) * IPR_NUM_CMD_BLKS) & 0xff;
6074 ipr_cmd->job_step = ipr_ioafp_std_inquiry;
6076 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT);
6078 LEAVE;
6079 return IPR_RC_JOB_RETURN;
6083 * ipr_reset_timer_done - Adapter reset timer function
6084 * @ipr_cmd: ipr command struct
6086 * Description: This function is used in adapter reset processing
6087 * for timing events. If the reset_cmd pointer in the IOA
6088 * config struct is not this adapter's we are doing nested
6089 * resets and fail_all_ops will take care of freeing the
6090 * command block.
6092 * Return value:
6093 * none
6095 static void ipr_reset_timer_done(struct ipr_cmnd *ipr_cmd)
6097 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6098 unsigned long lock_flags = 0;
6100 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
6102 if (ioa_cfg->reset_cmd == ipr_cmd) {
6103 list_del(&ipr_cmd->queue);
6104 ipr_cmd->done(ipr_cmd);
6107 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
6111 * ipr_reset_start_timer - Start a timer for adapter reset job
6112 * @ipr_cmd: ipr command struct
6113 * @timeout: timeout value
6115 * Description: This function is used in adapter reset processing
6116 * for timing events. If the reset_cmd pointer in the IOA
6117 * config struct is not this adapter's we are doing nested
6118 * resets and fail_all_ops will take care of freeing the
6119 * command block.
6121 * Return value:
6122 * none
6124 static void ipr_reset_start_timer(struct ipr_cmnd *ipr_cmd,
6125 unsigned long timeout)
6127 list_add_tail(&ipr_cmd->queue, &ipr_cmd->ioa_cfg->pending_q);
6128 ipr_cmd->done = ipr_reset_ioa_job;
6130 ipr_cmd->timer.data = (unsigned long) ipr_cmd;
6131 ipr_cmd->timer.expires = jiffies + timeout;
6132 ipr_cmd->timer.function = (void (*)(unsigned long))ipr_reset_timer_done;
6133 add_timer(&ipr_cmd->timer);
6137 * ipr_init_ioa_mem - Initialize ioa_cfg control block
6138 * @ioa_cfg: ioa cfg struct
6140 * Return value:
6141 * nothing
6143 static void ipr_init_ioa_mem(struct ipr_ioa_cfg *ioa_cfg)
6145 memset(ioa_cfg->host_rrq, 0, sizeof(u32) * IPR_NUM_CMD_BLKS);
6147 /* Initialize Host RRQ pointers */
6148 ioa_cfg->hrrq_start = ioa_cfg->host_rrq;
6149 ioa_cfg->hrrq_end = &ioa_cfg->host_rrq[IPR_NUM_CMD_BLKS - 1];
6150 ioa_cfg->hrrq_curr = ioa_cfg->hrrq_start;
6151 ioa_cfg->toggle_bit = 1;
6153 /* Zero out config table */
6154 memset(ioa_cfg->cfg_table, 0, sizeof(struct ipr_config_table));
6158 * ipr_reset_enable_ioa - Enable the IOA following a reset.
6159 * @ipr_cmd: ipr command struct
6161 * This function reinitializes some control blocks and
6162 * enables destructive diagnostics on the adapter.
6164 * Return value:
6165 * IPR_RC_JOB_RETURN
6167 static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd)
6169 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6170 volatile u32 int_reg;
6172 ENTER;
6173 ipr_cmd->job_step = ipr_ioafp_indentify_hrrq;
6174 ipr_init_ioa_mem(ioa_cfg);
6176 ioa_cfg->allow_interrupts = 1;
6177 int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
6179 if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
6180 writel((IPR_PCII_ERROR_INTERRUPTS | IPR_PCII_HRRQ_UPDATED),
6181 ioa_cfg->regs.clr_interrupt_mask_reg);
6182 int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
6183 return IPR_RC_JOB_CONTINUE;
6186 /* Enable destructive diagnostics on IOA */
6187 writel(ioa_cfg->doorbell, ioa_cfg->regs.set_uproc_interrupt_reg);
6189 writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg);
6190 int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
6192 dev_info(&ioa_cfg->pdev->dev, "Initializing IOA.\n");
6194 ipr_cmd->timer.data = (unsigned long) ipr_cmd;
6195 ipr_cmd->timer.expires = jiffies + (ipr_transop_timeout * HZ);
6196 ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout;
6197 ipr_cmd->done = ipr_reset_ioa_job;
6198 add_timer(&ipr_cmd->timer);
6199 list_add_tail(&ipr_cmd->queue, &ioa_cfg->pending_q);
6201 LEAVE;
6202 return IPR_RC_JOB_RETURN;
6206 * ipr_reset_wait_for_dump - Wait for a dump to timeout.
6207 * @ipr_cmd: ipr command struct
6209 * This function is invoked when an adapter dump has run out
6210 * of processing time.
6212 * Return value:
6213 * IPR_RC_JOB_CONTINUE
6215 static int ipr_reset_wait_for_dump(struct ipr_cmnd *ipr_cmd)
6217 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6219 if (ioa_cfg->sdt_state == GET_DUMP)
6220 ioa_cfg->sdt_state = ABORT_DUMP;
6222 ipr_cmd->job_step = ipr_reset_alert;
6224 return IPR_RC_JOB_CONTINUE;
6228 * ipr_unit_check_no_data - Log a unit check/no data error log
6229 * @ioa_cfg: ioa config struct
6231 * Logs an error indicating the adapter unit checked, but for some
6232 * reason, we were unable to fetch the unit check buffer.
6234 * Return value:
6235 * nothing
6237 static void ipr_unit_check_no_data(struct ipr_ioa_cfg *ioa_cfg)
6239 ioa_cfg->errors_logged++;
6240 dev_err(&ioa_cfg->pdev->dev, "IOA unit check with no data\n");
6244 * ipr_get_unit_check_buffer - Get the unit check buffer from the IOA
6245 * @ioa_cfg: ioa config struct
6247 * Fetches the unit check buffer from the adapter by clocking the data
6248 * through the mailbox register.
6250 * Return value:
6251 * nothing
6253 static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg)
6255 unsigned long mailbox;
6256 struct ipr_hostrcb *hostrcb;
6257 struct ipr_uc_sdt sdt;
6258 int rc, length;
6260 mailbox = readl(ioa_cfg->ioa_mailbox);
6262 if (!ipr_sdt_is_fmt2(mailbox)) {
6263 ipr_unit_check_no_data(ioa_cfg);
6264 return;
6267 memset(&sdt, 0, sizeof(struct ipr_uc_sdt));
6268 rc = ipr_get_ldump_data_section(ioa_cfg, mailbox, (__be32 *) &sdt,
6269 (sizeof(struct ipr_uc_sdt)) / sizeof(__be32));
6271 if (rc || (be32_to_cpu(sdt.hdr.state) != IPR_FMT2_SDT_READY_TO_USE) ||
6272 !(sdt.entry[0].flags & IPR_SDT_VALID_ENTRY)) {
6273 ipr_unit_check_no_data(ioa_cfg);
6274 return;
6277 /* Find length of the first sdt entry (UC buffer) */
6278 length = (be32_to_cpu(sdt.entry[0].end_offset) -
6279 be32_to_cpu(sdt.entry[0].bar_str_offset)) & IPR_FMT2_MBX_ADDR_MASK;
6281 hostrcb = list_entry(ioa_cfg->hostrcb_free_q.next,
6282 struct ipr_hostrcb, queue);
6283 list_del(&hostrcb->queue);
6284 memset(&hostrcb->hcam, 0, sizeof(hostrcb->hcam));
6286 rc = ipr_get_ldump_data_section(ioa_cfg,
6287 be32_to_cpu(sdt.entry[0].bar_str_offset),
6288 (__be32 *)&hostrcb->hcam,
6289 min(length, (int)sizeof(hostrcb->hcam)) / sizeof(__be32));
6291 if (!rc)
6292 ipr_handle_log_data(ioa_cfg, hostrcb);
6293 else
6294 ipr_unit_check_no_data(ioa_cfg);
6296 list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q);
6300 * ipr_reset_restore_cfg_space - Restore PCI config space.
6301 * @ipr_cmd: ipr command struct
6303 * Description: This function restores the saved PCI config space of
6304 * the adapter, fails all outstanding ops back to the callers, and
6305 * fetches the dump/unit check if applicable to this reset.
6307 * Return value:
6308 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6310 static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
6312 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6313 int rc;
6315 ENTER;
6316 pci_unblock_user_cfg_access(ioa_cfg->pdev);
6317 rc = pci_restore_state(ioa_cfg->pdev);
6319 if (rc != PCIBIOS_SUCCESSFUL) {
6320 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
6321 return IPR_RC_JOB_CONTINUE;
6324 if (ipr_set_pcix_cmd_reg(ioa_cfg)) {
6325 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
6326 return IPR_RC_JOB_CONTINUE;
6329 ipr_fail_all_ops(ioa_cfg);
6331 if (ioa_cfg->ioa_unit_checked) {
6332 ioa_cfg->ioa_unit_checked = 0;
6333 ipr_get_unit_check_buffer(ioa_cfg);
6334 ipr_cmd->job_step = ipr_reset_alert;
6335 ipr_reset_start_timer(ipr_cmd, 0);
6336 return IPR_RC_JOB_RETURN;
6339 if (ioa_cfg->in_ioa_bringdown) {
6340 ipr_cmd->job_step = ipr_ioa_bringdown_done;
6341 } else {
6342 ipr_cmd->job_step = ipr_reset_enable_ioa;
6344 if (GET_DUMP == ioa_cfg->sdt_state) {
6345 ipr_reset_start_timer(ipr_cmd, IPR_DUMP_TIMEOUT);
6346 ipr_cmd->job_step = ipr_reset_wait_for_dump;
6347 schedule_work(&ioa_cfg->work_q);
6348 return IPR_RC_JOB_RETURN;
6352 ENTER;
6353 return IPR_RC_JOB_CONTINUE;
6357 * ipr_reset_start_bist - Run BIST on the adapter.
6358 * @ipr_cmd: ipr command struct
6360 * Description: This function runs BIST on the adapter, then delays 2 seconds.
6362 * Return value:
6363 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6365 static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd)
6367 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6368 int rc;
6370 ENTER;
6371 pci_block_user_cfg_access(ioa_cfg->pdev);
6372 rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
6374 if (rc != PCIBIOS_SUCCESSFUL) {
6375 ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
6376 rc = IPR_RC_JOB_CONTINUE;
6377 } else {
6378 ipr_cmd->job_step = ipr_reset_restore_cfg_space;
6379 ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT);
6380 rc = IPR_RC_JOB_RETURN;
6383 LEAVE;
6384 return rc;
6388 * ipr_reset_allowed - Query whether or not IOA can be reset
6389 * @ioa_cfg: ioa config struct
6391 * Return value:
6392 * 0 if reset not allowed / non-zero if reset is allowed
6394 static int ipr_reset_allowed(struct ipr_ioa_cfg *ioa_cfg)
6396 volatile u32 temp_reg;
6398 temp_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
6399 return ((temp_reg & IPR_PCII_CRITICAL_OPERATION) == 0);
6403 * ipr_reset_wait_to_start_bist - Wait for permission to reset IOA.
6404 * @ipr_cmd: ipr command struct
6406 * Description: This function waits for adapter permission to run BIST,
6407 * then runs BIST. If the adapter does not give permission after a
6408 * reasonable time, we will reset the adapter anyway. The impact of
6409 * resetting the adapter without warning the adapter is the risk of
6410 * losing the persistent error log on the adapter. If the adapter is
6411 * reset while it is writing to the flash on the adapter, the flash
6412 * segment will have bad ECC and be zeroed.
6414 * Return value:
6415 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6417 static int ipr_reset_wait_to_start_bist(struct ipr_cmnd *ipr_cmd)
6419 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6420 int rc = IPR_RC_JOB_RETURN;
6422 if (!ipr_reset_allowed(ioa_cfg) && ipr_cmd->u.time_left) {
6423 ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT;
6424 ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
6425 } else {
6426 ipr_cmd->job_step = ipr_reset_start_bist;
6427 rc = IPR_RC_JOB_CONTINUE;
6430 return rc;
6434 * ipr_reset_alert_part2 - Alert the adapter of a pending reset
6435 * @ipr_cmd: ipr command struct
6437 * Description: This function alerts the adapter that it will be reset.
6438 * If memory space is not currently enabled, proceed directly
6439 * to running BIST on the adapter. The timer must always be started
6440 * so we guarantee we do not run BIST from ipr_isr.
6442 * Return value:
6443 * IPR_RC_JOB_RETURN
6445 static int ipr_reset_alert(struct ipr_cmnd *ipr_cmd)
6447 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6448 u16 cmd_reg;
6449 int rc;
6451 ENTER;
6452 rc = pci_read_config_word(ioa_cfg->pdev, PCI_COMMAND, &cmd_reg);
6454 if ((rc == PCIBIOS_SUCCESSFUL) && (cmd_reg & PCI_COMMAND_MEMORY)) {
6455 ipr_mask_and_clear_interrupts(ioa_cfg, ~0);
6456 writel(IPR_UPROCI_RESET_ALERT, ioa_cfg->regs.set_uproc_interrupt_reg);
6457 ipr_cmd->job_step = ipr_reset_wait_to_start_bist;
6458 } else {
6459 ipr_cmd->job_step = ipr_reset_start_bist;
6462 ipr_cmd->u.time_left = IPR_WAIT_FOR_RESET_TIMEOUT;
6463 ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT);
6465 LEAVE;
6466 return IPR_RC_JOB_RETURN;
6470 * ipr_reset_ucode_download_done - Microcode download completion
6471 * @ipr_cmd: ipr command struct
6473 * Description: This function unmaps the microcode download buffer.
6475 * Return value:
6476 * IPR_RC_JOB_CONTINUE
6478 static int ipr_reset_ucode_download_done(struct ipr_cmnd *ipr_cmd)
6480 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6481 struct ipr_sglist *sglist = ioa_cfg->ucode_sglist;
6483 pci_unmap_sg(ioa_cfg->pdev, sglist->scatterlist,
6484 sglist->num_sg, DMA_TO_DEVICE);
6486 ipr_cmd->job_step = ipr_reset_alert;
6487 return IPR_RC_JOB_CONTINUE;
6491 * ipr_reset_ucode_download - Download microcode to the adapter
6492 * @ipr_cmd: ipr command struct
6494 * Description: This function checks to see if it there is microcode
6495 * to download to the adapter. If there is, a download is performed.
6497 * Return value:
6498 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6500 static int ipr_reset_ucode_download(struct ipr_cmnd *ipr_cmd)
6502 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6503 struct ipr_sglist *sglist = ioa_cfg->ucode_sglist;
6505 ENTER;
6506 ipr_cmd->job_step = ipr_reset_alert;
6508 if (!sglist)
6509 return IPR_RC_JOB_CONTINUE;
6511 ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
6512 ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_SCSICDB;
6513 ipr_cmd->ioarcb.cmd_pkt.cdb[0] = WRITE_BUFFER;
6514 ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_WR_BUF_DOWNLOAD_AND_SAVE;
6515 ipr_cmd->ioarcb.cmd_pkt.cdb[6] = (sglist->buffer_len & 0xff0000) >> 16;
6516 ipr_cmd->ioarcb.cmd_pkt.cdb[7] = (sglist->buffer_len & 0x00ff00) >> 8;
6517 ipr_cmd->ioarcb.cmd_pkt.cdb[8] = sglist->buffer_len & 0x0000ff;
6519 ipr_build_ucode_ioadl(ipr_cmd, sglist);
6520 ipr_cmd->job_step = ipr_reset_ucode_download_done;
6522 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
6523 IPR_WRITE_BUFFER_TIMEOUT);
6525 LEAVE;
6526 return IPR_RC_JOB_RETURN;
6530 * ipr_reset_shutdown_ioa - Shutdown the adapter
6531 * @ipr_cmd: ipr command struct
6533 * Description: This function issues an adapter shutdown of the
6534 * specified type to the specified adapter as part of the
6535 * adapter reset job.
6537 * Return value:
6538 * IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
6540 static int ipr_reset_shutdown_ioa(struct ipr_cmnd *ipr_cmd)
6542 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6543 enum ipr_shutdown_type shutdown_type = ipr_cmd->u.shutdown_type;
6544 unsigned long timeout;
6545 int rc = IPR_RC_JOB_CONTINUE;
6547 ENTER;
6548 if (shutdown_type != IPR_SHUTDOWN_NONE && !ioa_cfg->ioa_is_dead) {
6549 ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE);
6550 ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
6551 ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN;
6552 ipr_cmd->ioarcb.cmd_pkt.cdb[1] = shutdown_type;
6554 if (shutdown_type == IPR_SHUTDOWN_ABBREV)
6555 timeout = IPR_ABBREV_SHUTDOWN_TIMEOUT;
6556 else if (shutdown_type == IPR_SHUTDOWN_PREPARE_FOR_NORMAL)
6557 timeout = IPR_INTERNAL_TIMEOUT;
6558 else
6559 timeout = IPR_SHUTDOWN_TIMEOUT;
6561 ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, timeout);
6563 rc = IPR_RC_JOB_RETURN;
6564 ipr_cmd->job_step = ipr_reset_ucode_download;
6565 } else
6566 ipr_cmd->job_step = ipr_reset_alert;
6568 LEAVE;
6569 return rc;
6573 * ipr_reset_ioa_job - Adapter reset job
6574 * @ipr_cmd: ipr command struct
6576 * Description: This function is the job router for the adapter reset job.
6578 * Return value:
6579 * none
6581 static void ipr_reset_ioa_job(struct ipr_cmnd *ipr_cmd)
6583 u32 rc, ioasc;
6584 struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
6586 do {
6587 ioasc = be32_to_cpu(ipr_cmd->ioasa.ioasc);
6589 if (ioa_cfg->reset_cmd != ipr_cmd) {
6591 * We are doing nested adapter resets and this is
6592 * not the current reset job.
6594 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
6595 return;
6598 if (IPR_IOASC_SENSE_KEY(ioasc)) {
6599 rc = ipr_cmd->job_step_failed(ipr_cmd);
6600 if (rc == IPR_RC_JOB_RETURN)
6601 return;
6604 ipr_reinit_ipr_cmnd(ipr_cmd);
6605 ipr_cmd->job_step_failed = ipr_reset_cmd_failed;
6606 rc = ipr_cmd->job_step(ipr_cmd);
6607 } while(rc == IPR_RC_JOB_CONTINUE);
6611 * _ipr_initiate_ioa_reset - Initiate an adapter reset
6612 * @ioa_cfg: ioa config struct
6613 * @job_step: first job step of reset job
6614 * @shutdown_type: shutdown type
6616 * Description: This function will initiate the reset of the given adapter
6617 * starting at the selected job step.
6618 * If the caller needs to wait on the completion of the reset,
6619 * the caller must sleep on the reset_wait_q.
6621 * Return value:
6622 * none
6624 static void _ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
6625 int (*job_step) (struct ipr_cmnd *),
6626 enum ipr_shutdown_type shutdown_type)
6628 struct ipr_cmnd *ipr_cmd;
6630 ioa_cfg->in_reset_reload = 1;
6631 ioa_cfg->allow_cmds = 0;
6632 scsi_block_requests(ioa_cfg->host);
6634 ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
6635 ioa_cfg->reset_cmd = ipr_cmd;
6636 ipr_cmd->job_step = job_step;
6637 ipr_cmd->u.shutdown_type = shutdown_type;
6639 ipr_reset_ioa_job(ipr_cmd);
6643 * ipr_initiate_ioa_reset - Initiate an adapter reset
6644 * @ioa_cfg: ioa config struct
6645 * @shutdown_type: shutdown type
6647 * Description: This function will initiate the reset of the given adapter.
6648 * If the caller needs to wait on the completion of the reset,
6649 * the caller must sleep on the reset_wait_q.
6651 * Return value:
6652 * none
6654 static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg,
6655 enum ipr_shutdown_type shutdown_type)
6657 if (ioa_cfg->ioa_is_dead)
6658 return;
6660 if (ioa_cfg->in_reset_reload && ioa_cfg->sdt_state == GET_DUMP)
6661 ioa_cfg->sdt_state = ABORT_DUMP;
6663 if (ioa_cfg->reset_retries++ >= IPR_NUM_RESET_RELOAD_RETRIES) {
6664 dev_err(&ioa_cfg->pdev->dev,
6665 "IOA taken offline - error recovery failed\n");
6667 ioa_cfg->reset_retries = 0;
6668 ioa_cfg->ioa_is_dead = 1;
6670 if (ioa_cfg->in_ioa_bringdown) {
6671 ioa_cfg->reset_cmd = NULL;
6672 ioa_cfg->in_reset_reload = 0;
6673 ipr_fail_all_ops(ioa_cfg);
6674 wake_up_all(&ioa_cfg->reset_wait_q);
6676 spin_unlock_irq(ioa_cfg->host->host_lock);
6677 scsi_unblock_requests(ioa_cfg->host);
6678 spin_lock_irq(ioa_cfg->host->host_lock);
6679 return;
6680 } else {
6681 ioa_cfg->in_ioa_bringdown = 1;
6682 shutdown_type = IPR_SHUTDOWN_NONE;
6686 _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_shutdown_ioa,
6687 shutdown_type);
6691 * ipr_reset_freeze - Hold off all I/O activity
6692 * @ipr_cmd: ipr command struct
6694 * Description: If the PCI slot is frozen, hold off all I/O
6695 * activity; then, as soon as the slot is available again,
6696 * initiate an adapter reset.
6698 static int ipr_reset_freeze(struct ipr_cmnd *ipr_cmd)
6700 /* Disallow new interrupts, avoid loop */
6701 ipr_cmd->ioa_cfg->allow_interrupts = 0;
6702 list_add_tail(&ipr_cmd->queue, &ipr_cmd->ioa_cfg->pending_q);
6703 ipr_cmd->done = ipr_reset_ioa_job;
6704 return IPR_RC_JOB_RETURN;
6708 * ipr_pci_frozen - Called when slot has experienced a PCI bus error.
6709 * @pdev: PCI device struct
6711 * Description: This routine is called to tell us that the PCI bus
6712 * is down. Can't do anything here, except put the device driver
6713 * into a holding pattern, waiting for the PCI bus to come back.
6715 static void ipr_pci_frozen(struct pci_dev *pdev)
6717 unsigned long flags = 0;
6718 struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
6720 spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
6721 _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_freeze, IPR_SHUTDOWN_NONE);
6722 spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
6726 * ipr_pci_slot_reset - Called when PCI slot has been reset.
6727 * @pdev: PCI device struct
6729 * Description: This routine is called by the pci error recovery
6730 * code after the PCI slot has been reset, just before we
6731 * should resume normal operations.
6733 static pci_ers_result_t ipr_pci_slot_reset(struct pci_dev *pdev)
6735 unsigned long flags = 0;
6736 struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
6738 spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
6739 _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_restore_cfg_space,
6740 IPR_SHUTDOWN_NONE);
6741 spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
6742 return PCI_ERS_RESULT_RECOVERED;
6746 * ipr_pci_perm_failure - Called when PCI slot is dead for good.
6747 * @pdev: PCI device struct
6749 * Description: This routine is called when the PCI bus has
6750 * permanently failed.
6752 static void ipr_pci_perm_failure(struct pci_dev *pdev)
6754 unsigned long flags = 0;
6755 struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
6757 spin_lock_irqsave(ioa_cfg->host->host_lock, flags);
6758 if (ioa_cfg->sdt_state == WAIT_FOR_DUMP)
6759 ioa_cfg->sdt_state = ABORT_DUMP;
6760 ioa_cfg->reset_retries = IPR_NUM_RESET_RELOAD_RETRIES;
6761 ioa_cfg->in_ioa_bringdown = 1;
6762 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
6763 spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
6767 * ipr_pci_error_detected - Called when a PCI error is detected.
6768 * @pdev: PCI device struct
6769 * @state: PCI channel state
6771 * Description: Called when a PCI error is detected.
6773 * Return value:
6774 * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
6776 static pci_ers_result_t ipr_pci_error_detected(struct pci_dev *pdev,
6777 pci_channel_state_t state)
6779 switch (state) {
6780 case pci_channel_io_frozen:
6781 ipr_pci_frozen(pdev);
6782 return PCI_ERS_RESULT_NEED_RESET;
6783 case pci_channel_io_perm_failure:
6784 ipr_pci_perm_failure(pdev);
6785 return PCI_ERS_RESULT_DISCONNECT;
6786 break;
6787 default:
6788 break;
6790 return PCI_ERS_RESULT_NEED_RESET;
6794 * ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..)
6795 * @ioa_cfg: ioa cfg struct
6797 * Description: This is the second phase of adapter intialization
6798 * This function takes care of initilizing the adapter to the point
6799 * where it can accept new commands.
6801 * Return value:
6802 * 0 on sucess / -EIO on failure
6804 static int __devinit ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg)
6806 int rc = 0;
6807 unsigned long host_lock_flags = 0;
6809 ENTER;
6810 spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
6811 dev_dbg(&ioa_cfg->pdev->dev, "ioa_cfg adx: 0x%p\n", ioa_cfg);
6812 if (ioa_cfg->needs_hard_reset) {
6813 ioa_cfg->needs_hard_reset = 0;
6814 ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
6815 } else
6816 _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa,
6817 IPR_SHUTDOWN_NONE);
6819 spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
6820 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
6821 spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
6823 if (ioa_cfg->ioa_is_dead) {
6824 rc = -EIO;
6825 } else if (ipr_invalid_adapter(ioa_cfg)) {
6826 if (!ipr_testmode)
6827 rc = -EIO;
6829 dev_err(&ioa_cfg->pdev->dev,
6830 "Adapter not supported in this hardware configuration.\n");
6833 spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
6835 LEAVE;
6836 return rc;
6840 * ipr_free_cmd_blks - Frees command blocks allocated for an adapter
6841 * @ioa_cfg: ioa config struct
6843 * Return value:
6844 * none
6846 static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
6848 int i;
6850 for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
6851 if (ioa_cfg->ipr_cmnd_list[i])
6852 pci_pool_free(ioa_cfg->ipr_cmd_pool,
6853 ioa_cfg->ipr_cmnd_list[i],
6854 ioa_cfg->ipr_cmnd_list_dma[i]);
6856 ioa_cfg->ipr_cmnd_list[i] = NULL;
6859 if (ioa_cfg->ipr_cmd_pool)
6860 pci_pool_destroy (ioa_cfg->ipr_cmd_pool);
6862 ioa_cfg->ipr_cmd_pool = NULL;
6866 * ipr_free_mem - Frees memory allocated for an adapter
6867 * @ioa_cfg: ioa cfg struct
6869 * Return value:
6870 * nothing
6872 static void ipr_free_mem(struct ipr_ioa_cfg *ioa_cfg)
6874 int i;
6876 kfree(ioa_cfg->res_entries);
6877 pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_misc_cbs),
6878 ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
6879 ipr_free_cmd_blks(ioa_cfg);
6880 pci_free_consistent(ioa_cfg->pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
6881 ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
6882 pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_config_table),
6883 ioa_cfg->cfg_table,
6884 ioa_cfg->cfg_table_dma);
6886 for (i = 0; i < IPR_NUM_HCAMS; i++) {
6887 pci_free_consistent(ioa_cfg->pdev,
6888 sizeof(struct ipr_hostrcb),
6889 ioa_cfg->hostrcb[i],
6890 ioa_cfg->hostrcb_dma[i]);
6893 ipr_free_dump(ioa_cfg);
6894 kfree(ioa_cfg->trace);
6898 * ipr_free_all_resources - Free all allocated resources for an adapter.
6899 * @ipr_cmd: ipr command struct
6901 * This function frees all allocated resources for the
6902 * specified adapter.
6904 * Return value:
6905 * none
6907 static void ipr_free_all_resources(struct ipr_ioa_cfg *ioa_cfg)
6909 struct pci_dev *pdev = ioa_cfg->pdev;
6911 ENTER;
6912 free_irq(pdev->irq, ioa_cfg);
6913 iounmap(ioa_cfg->hdw_dma_regs);
6914 pci_release_regions(pdev);
6915 ipr_free_mem(ioa_cfg);
6916 scsi_host_put(ioa_cfg->host);
6917 pci_disable_device(pdev);
6918 LEAVE;
6922 * ipr_alloc_cmd_blks - Allocate command blocks for an adapter
6923 * @ioa_cfg: ioa config struct
6925 * Return value:
6926 * 0 on success / -ENOMEM on allocation failure
6928 static int __devinit ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg)
6930 struct ipr_cmnd *ipr_cmd;
6931 struct ipr_ioarcb *ioarcb;
6932 dma_addr_t dma_addr;
6933 int i;
6935 ioa_cfg->ipr_cmd_pool = pci_pool_create (IPR_NAME, ioa_cfg->pdev,
6936 sizeof(struct ipr_cmnd), 8, 0);
6938 if (!ioa_cfg->ipr_cmd_pool)
6939 return -ENOMEM;
6941 for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
6942 ipr_cmd = pci_pool_alloc (ioa_cfg->ipr_cmd_pool, SLAB_KERNEL, &dma_addr);
6944 if (!ipr_cmd) {
6945 ipr_free_cmd_blks(ioa_cfg);
6946 return -ENOMEM;
6949 memset(ipr_cmd, 0, sizeof(*ipr_cmd));
6950 ioa_cfg->ipr_cmnd_list[i] = ipr_cmd;
6951 ioa_cfg->ipr_cmnd_list_dma[i] = dma_addr;
6953 ioarcb = &ipr_cmd->ioarcb;
6954 ioarcb->ioarcb_host_pci_addr = cpu_to_be32(dma_addr);
6955 ioarcb->host_response_handle = cpu_to_be32(i << 2);
6956 ioarcb->write_ioadl_addr =
6957 cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
6958 ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
6959 ioarcb->ioasa_host_pci_addr =
6960 cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioasa));
6961 ioarcb->ioasa_len = cpu_to_be16(sizeof(struct ipr_ioasa));
6962 ipr_cmd->cmd_index = i;
6963 ipr_cmd->ioa_cfg = ioa_cfg;
6964 ipr_cmd->sense_buffer_dma = dma_addr +
6965 offsetof(struct ipr_cmnd, sense_buffer);
6967 list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);
6970 return 0;
6974 * ipr_alloc_mem - Allocate memory for an adapter
6975 * @ioa_cfg: ioa config struct
6977 * Return value:
6978 * 0 on success / non-zero for error
6980 static int __devinit ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg)
6982 struct pci_dev *pdev = ioa_cfg->pdev;
6983 int i, rc = -ENOMEM;
6985 ENTER;
6986 ioa_cfg->res_entries = kzalloc(sizeof(struct ipr_resource_entry) *
6987 IPR_MAX_PHYSICAL_DEVS, GFP_KERNEL);
6989 if (!ioa_cfg->res_entries)
6990 goto out;
6992 for (i = 0; i < IPR_MAX_PHYSICAL_DEVS; i++)
6993 list_add_tail(&ioa_cfg->res_entries[i].queue, &ioa_cfg->free_res_q);
6995 ioa_cfg->vpd_cbs = pci_alloc_consistent(ioa_cfg->pdev,
6996 sizeof(struct ipr_misc_cbs),
6997 &ioa_cfg->vpd_cbs_dma);
6999 if (!ioa_cfg->vpd_cbs)
7000 goto out_free_res_entries;
7002 if (ipr_alloc_cmd_blks(ioa_cfg))
7003 goto out_free_vpd_cbs;
7005 ioa_cfg->host_rrq = pci_alloc_consistent(ioa_cfg->pdev,
7006 sizeof(u32) * IPR_NUM_CMD_BLKS,
7007 &ioa_cfg->host_rrq_dma);
7009 if (!ioa_cfg->host_rrq)
7010 goto out_ipr_free_cmd_blocks;
7012 ioa_cfg->cfg_table = pci_alloc_consistent(ioa_cfg->pdev,
7013 sizeof(struct ipr_config_table),
7014 &ioa_cfg->cfg_table_dma);
7016 if (!ioa_cfg->cfg_table)
7017 goto out_free_host_rrq;
7019 for (i = 0; i < IPR_NUM_HCAMS; i++) {
7020 ioa_cfg->hostrcb[i] = pci_alloc_consistent(ioa_cfg->pdev,
7021 sizeof(struct ipr_hostrcb),
7022 &ioa_cfg->hostrcb_dma[i]);
7024 if (!ioa_cfg->hostrcb[i])
7025 goto out_free_hostrcb_dma;
7027 ioa_cfg->hostrcb[i]->hostrcb_dma =
7028 ioa_cfg->hostrcb_dma[i] + offsetof(struct ipr_hostrcb, hcam);
7029 ioa_cfg->hostrcb[i]->ioa_cfg = ioa_cfg;
7030 list_add_tail(&ioa_cfg->hostrcb[i]->queue, &ioa_cfg->hostrcb_free_q);
7033 ioa_cfg->trace = kzalloc(sizeof(struct ipr_trace_entry) *
7034 IPR_NUM_TRACE_ENTRIES, GFP_KERNEL);
7036 if (!ioa_cfg->trace)
7037 goto out_free_hostrcb_dma;
7039 rc = 0;
7040 out:
7041 LEAVE;
7042 return rc;
7044 out_free_hostrcb_dma:
7045 while (i-- > 0) {
7046 pci_free_consistent(pdev, sizeof(struct ipr_hostrcb),
7047 ioa_cfg->hostrcb[i],
7048 ioa_cfg->hostrcb_dma[i]);
7050 pci_free_consistent(pdev, sizeof(struct ipr_config_table),
7051 ioa_cfg->cfg_table, ioa_cfg->cfg_table_dma);
7052 out_free_host_rrq:
7053 pci_free_consistent(pdev, sizeof(u32) * IPR_NUM_CMD_BLKS,
7054 ioa_cfg->host_rrq, ioa_cfg->host_rrq_dma);
7055 out_ipr_free_cmd_blocks:
7056 ipr_free_cmd_blks(ioa_cfg);
7057 out_free_vpd_cbs:
7058 pci_free_consistent(pdev, sizeof(struct ipr_misc_cbs),
7059 ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
7060 out_free_res_entries:
7061 kfree(ioa_cfg->res_entries);
7062 goto out;
7066 * ipr_initialize_bus_attr - Initialize SCSI bus attributes to default values
7067 * @ioa_cfg: ioa config struct
7069 * Return value:
7070 * none
7072 static void __devinit ipr_initialize_bus_attr(struct ipr_ioa_cfg *ioa_cfg)
7074 int i;
7076 for (i = 0; i < IPR_MAX_NUM_BUSES; i++) {
7077 ioa_cfg->bus_attr[i].bus = i;
7078 ioa_cfg->bus_attr[i].qas_enabled = 0;
7079 ioa_cfg->bus_attr[i].bus_width = IPR_DEFAULT_BUS_WIDTH;
7080 if (ipr_max_speed < ARRAY_SIZE(ipr_max_bus_speeds))
7081 ioa_cfg->bus_attr[i].max_xfer_rate = ipr_max_bus_speeds[ipr_max_speed];
7082 else
7083 ioa_cfg->bus_attr[i].max_xfer_rate = IPR_U160_SCSI_RATE;
7088 * ipr_init_ioa_cfg - Initialize IOA config struct
7089 * @ioa_cfg: ioa config struct
7090 * @host: scsi host struct
7091 * @pdev: PCI dev struct
7093 * Return value:
7094 * none
7096 static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
7097 struct Scsi_Host *host, struct pci_dev *pdev)
7099 const struct ipr_interrupt_offsets *p;
7100 struct ipr_interrupts *t;
7101 void __iomem *base;
7103 ioa_cfg->host = host;
7104 ioa_cfg->pdev = pdev;
7105 ioa_cfg->log_level = ipr_log_level;
7106 ioa_cfg->doorbell = IPR_DOORBELL;
7107 if (!ipr_auto_create)
7108 ioa_cfg->doorbell |= IPR_RUNTIME_RESET;
7109 sprintf(ioa_cfg->eye_catcher, IPR_EYECATCHER);
7110 sprintf(ioa_cfg->trace_start, IPR_TRACE_START_LABEL);
7111 sprintf(ioa_cfg->ipr_free_label, IPR_FREEQ_LABEL);
7112 sprintf(ioa_cfg->ipr_pending_label, IPR_PENDQ_LABEL);
7113 sprintf(ioa_cfg->cfg_table_start, IPR_CFG_TBL_START);
7114 sprintf(ioa_cfg->resource_table_label, IPR_RES_TABLE_LABEL);
7115 sprintf(ioa_cfg->ipr_hcam_label, IPR_HCAM_LABEL);
7116 sprintf(ioa_cfg->ipr_cmd_label, IPR_CMD_LABEL);
7118 INIT_LIST_HEAD(&ioa_cfg->free_q);
7119 INIT_LIST_HEAD(&ioa_cfg->pending_q);
7120 INIT_LIST_HEAD(&ioa_cfg->hostrcb_free_q);
7121 INIT_LIST_HEAD(&ioa_cfg->hostrcb_pending_q);
7122 INIT_LIST_HEAD(&ioa_cfg->free_res_q);
7123 INIT_LIST_HEAD(&ioa_cfg->used_res_q);
7124 INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread, ioa_cfg);
7125 init_waitqueue_head(&ioa_cfg->reset_wait_q);
7126 ioa_cfg->sdt_state = INACTIVE;
7127 if (ipr_enable_cache)
7128 ioa_cfg->cache_state = CACHE_ENABLED;
7129 else
7130 ioa_cfg->cache_state = CACHE_DISABLED;
7132 ipr_initialize_bus_attr(ioa_cfg);
7134 host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS;
7135 host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET;
7136 host->max_channel = IPR_MAX_BUS_TO_SCAN;
7137 host->unique_id = host->host_no;
7138 host->max_cmd_len = IPR_MAX_CDB_LEN;
7139 pci_set_drvdata(pdev, ioa_cfg);
7141 p = &ioa_cfg->chip_cfg->regs;
7142 t = &ioa_cfg->regs;
7143 base = ioa_cfg->hdw_dma_regs;
7145 t->set_interrupt_mask_reg = base + p->set_interrupt_mask_reg;
7146 t->clr_interrupt_mask_reg = base + p->clr_interrupt_mask_reg;
7147 t->sense_interrupt_mask_reg = base + p->sense_interrupt_mask_reg;
7148 t->clr_interrupt_reg = base + p->clr_interrupt_reg;
7149 t->sense_interrupt_reg = base + p->sense_interrupt_reg;
7150 t->ioarrin_reg = base + p->ioarrin_reg;
7151 t->sense_uproc_interrupt_reg = base + p->sense_uproc_interrupt_reg;
7152 t->set_uproc_interrupt_reg = base + p->set_uproc_interrupt_reg;
7153 t->clr_uproc_interrupt_reg = base + p->clr_uproc_interrupt_reg;
7157 * ipr_get_chip_cfg - Find adapter chip configuration
7158 * @dev_id: PCI device id struct
7160 * Return value:
7161 * ptr to chip config on success / NULL on failure
7163 static const struct ipr_chip_cfg_t * __devinit
7164 ipr_get_chip_cfg(const struct pci_device_id *dev_id)
7166 int i;
7168 if (dev_id->driver_data)
7169 return (const struct ipr_chip_cfg_t *)dev_id->driver_data;
7171 for (i = 0; i < ARRAY_SIZE(ipr_chip); i++)
7172 if (ipr_chip[i].vendor == dev_id->vendor &&
7173 ipr_chip[i].device == dev_id->device)
7174 return ipr_chip[i].cfg;
7175 return NULL;
7179 * ipr_probe_ioa - Allocates memory and does first stage of initialization
7180 * @pdev: PCI device struct
7181 * @dev_id: PCI device id struct
7183 * Return value:
7184 * 0 on success / non-zero on failure
7186 static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
7187 const struct pci_device_id *dev_id)
7189 struct ipr_ioa_cfg *ioa_cfg;
7190 struct Scsi_Host *host;
7191 unsigned long ipr_regs_pci;
7192 void __iomem *ipr_regs;
7193 int rc = PCIBIOS_SUCCESSFUL;
7194 volatile u32 mask, uproc;
7196 ENTER;
7198 if ((rc = pci_enable_device(pdev))) {
7199 dev_err(&pdev->dev, "Cannot enable adapter\n");
7200 goto out;
7203 dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq);
7205 host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg));
7207 if (!host) {
7208 dev_err(&pdev->dev, "call to scsi_host_alloc failed!\n");
7209 rc = -ENOMEM;
7210 goto out_disable;
7213 ioa_cfg = (struct ipr_ioa_cfg *)host->hostdata;
7214 memset(ioa_cfg, 0, sizeof(struct ipr_ioa_cfg));
7215 ata_host_init(&ioa_cfg->ata_host, &pdev->dev,
7216 sata_port_info.flags, &ipr_sata_ops);
7218 ioa_cfg->chip_cfg = ipr_get_chip_cfg(dev_id);
7220 if (!ioa_cfg->chip_cfg) {
7221 dev_err(&pdev->dev, "Unknown adapter chipset 0x%04X 0x%04X\n",
7222 dev_id->vendor, dev_id->device);
7223 goto out_scsi_host_put;
7226 ipr_regs_pci = pci_resource_start(pdev, 0);
7228 rc = pci_request_regions(pdev, IPR_NAME);
7229 if (rc < 0) {
7230 dev_err(&pdev->dev,
7231 "Couldn't register memory range of registers\n");
7232 goto out_scsi_host_put;
7235 ipr_regs = ioremap(ipr_regs_pci, pci_resource_len(pdev, 0));
7237 if (!ipr_regs) {
7238 dev_err(&pdev->dev,
7239 "Couldn't map memory range of registers\n");
7240 rc = -ENOMEM;
7241 goto out_release_regions;
7244 ioa_cfg->hdw_dma_regs = ipr_regs;
7245 ioa_cfg->hdw_dma_regs_pci = ipr_regs_pci;
7246 ioa_cfg->ioa_mailbox = ioa_cfg->chip_cfg->mailbox + ipr_regs;
7248 ipr_init_ioa_cfg(ioa_cfg, host, pdev);
7250 pci_set_master(pdev);
7252 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
7253 if (rc < 0) {
7254 dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
7255 goto cleanup_nomem;
7258 rc = pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
7259 ioa_cfg->chip_cfg->cache_line_size);
7261 if (rc != PCIBIOS_SUCCESSFUL) {
7262 dev_err(&pdev->dev, "Write of cache line size failed\n");
7263 rc = -EIO;
7264 goto cleanup_nomem;
7267 /* Save away PCI config space for use following IOA reset */
7268 rc = pci_save_state(pdev);
7270 if (rc != PCIBIOS_SUCCESSFUL) {
7271 dev_err(&pdev->dev, "Failed to save PCI config space\n");
7272 rc = -EIO;
7273 goto cleanup_nomem;
7276 if ((rc = ipr_save_pcix_cmd_reg(ioa_cfg)))
7277 goto cleanup_nomem;
7279 if ((rc = ipr_set_pcix_cmd_reg(ioa_cfg)))
7280 goto cleanup_nomem;
7282 rc = ipr_alloc_mem(ioa_cfg);
7283 if (rc < 0) {
7284 dev_err(&pdev->dev,
7285 "Couldn't allocate enough memory for device driver!\n");
7286 goto cleanup_nomem;
7290 * If HRRQ updated interrupt is not masked, or reset alert is set,
7291 * the card is in an unknown state and needs a hard reset
7293 mask = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
7294 uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg);
7295 if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT))
7296 ioa_cfg->needs_hard_reset = 1;
7298 ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
7299 rc = request_irq(pdev->irq, ipr_isr, IRQF_SHARED, IPR_NAME, ioa_cfg);
7301 if (rc) {
7302 dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n",
7303 pdev->irq, rc);
7304 goto cleanup_nolog;
7307 spin_lock(&ipr_driver_lock);
7308 list_add_tail(&ioa_cfg->queue, &ipr_ioa_head);
7309 spin_unlock(&ipr_driver_lock);
7311 LEAVE;
7312 out:
7313 return rc;
7315 cleanup_nolog:
7316 ipr_free_mem(ioa_cfg);
7317 cleanup_nomem:
7318 iounmap(ipr_regs);
7319 out_release_regions:
7320 pci_release_regions(pdev);
7321 out_scsi_host_put:
7322 scsi_host_put(host);
7323 out_disable:
7324 pci_disable_device(pdev);
7325 goto out;
7329 * ipr_scan_vsets - Scans for VSET devices
7330 * @ioa_cfg: ioa config struct
7332 * Description: Since the VSET resources do not follow SAM in that we can have
7333 * sparse LUNs with no LUN 0, we have to scan for these ourselves.
7335 * Return value:
7336 * none
7338 static void ipr_scan_vsets(struct ipr_ioa_cfg *ioa_cfg)
7340 int target, lun;
7342 for (target = 0; target < IPR_MAX_NUM_TARGETS_PER_BUS; target++)
7343 for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++ )
7344 scsi_add_device(ioa_cfg->host, IPR_VSET_BUS, target, lun);
7348 * ipr_initiate_ioa_bringdown - Bring down an adapter
7349 * @ioa_cfg: ioa config struct
7350 * @shutdown_type: shutdown type
7352 * Description: This function will initiate bringing down the adapter.
7353 * This consists of issuing an IOA shutdown to the adapter
7354 * to flush the cache, and running BIST.
7355 * If the caller needs to wait on the completion of the reset,
7356 * the caller must sleep on the reset_wait_q.
7358 * Return value:
7359 * none
7361 static void ipr_initiate_ioa_bringdown(struct ipr_ioa_cfg *ioa_cfg,
7362 enum ipr_shutdown_type shutdown_type)
7364 ENTER;
7365 if (ioa_cfg->sdt_state == WAIT_FOR_DUMP)
7366 ioa_cfg->sdt_state = ABORT_DUMP;
7367 ioa_cfg->reset_retries = 0;
7368 ioa_cfg->in_ioa_bringdown = 1;
7369 ipr_initiate_ioa_reset(ioa_cfg, shutdown_type);
7370 LEAVE;
7374 * __ipr_remove - Remove a single adapter
7375 * @pdev: pci device struct
7377 * Adapter hot plug remove entry point.
7379 * Return value:
7380 * none
7382 static void __ipr_remove(struct pci_dev *pdev)
7384 unsigned long host_lock_flags = 0;
7385 struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
7386 ENTER;
7388 spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
7389 ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
7391 spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
7392 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
7393 flush_scheduled_work();
7394 spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
7396 spin_lock(&ipr_driver_lock);
7397 list_del(&ioa_cfg->queue);
7398 spin_unlock(&ipr_driver_lock);
7400 if (ioa_cfg->sdt_state == ABORT_DUMP)
7401 ioa_cfg->sdt_state = WAIT_FOR_DUMP;
7402 spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
7404 ipr_free_all_resources(ioa_cfg);
7406 LEAVE;
7410 * ipr_remove - IOA hot plug remove entry point
7411 * @pdev: pci device struct
7413 * Adapter hot plug remove entry point.
7415 * Return value:
7416 * none
7418 static void ipr_remove(struct pci_dev *pdev)
7420 struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
7422 ENTER;
7424 ipr_remove_trace_file(&ioa_cfg->host->shost_classdev.kobj,
7425 &ipr_trace_attr);
7426 ipr_remove_dump_file(&ioa_cfg->host->shost_classdev.kobj,
7427 &ipr_dump_attr);
7428 scsi_remove_host(ioa_cfg->host);
7430 __ipr_remove(pdev);
7432 LEAVE;
7436 * ipr_probe - Adapter hot plug add entry point
7438 * Return value:
7439 * 0 on success / non-zero on failure
7441 static int __devinit ipr_probe(struct pci_dev *pdev,
7442 const struct pci_device_id *dev_id)
7444 struct ipr_ioa_cfg *ioa_cfg;
7445 int rc;
7447 rc = ipr_probe_ioa(pdev, dev_id);
7449 if (rc)
7450 return rc;
7452 ioa_cfg = pci_get_drvdata(pdev);
7453 rc = ipr_probe_ioa_part2(ioa_cfg);
7455 if (rc) {
7456 __ipr_remove(pdev);
7457 return rc;
7460 rc = scsi_add_host(ioa_cfg->host, &pdev->dev);
7462 if (rc) {
7463 __ipr_remove(pdev);
7464 return rc;
7467 rc = ipr_create_trace_file(&ioa_cfg->host->shost_classdev.kobj,
7468 &ipr_trace_attr);
7470 if (rc) {
7471 scsi_remove_host(ioa_cfg->host);
7472 __ipr_remove(pdev);
7473 return rc;
7476 rc = ipr_create_dump_file(&ioa_cfg->host->shost_classdev.kobj,
7477 &ipr_dump_attr);
7479 if (rc) {
7480 ipr_remove_trace_file(&ioa_cfg->host->shost_classdev.kobj,
7481 &ipr_trace_attr);
7482 scsi_remove_host(ioa_cfg->host);
7483 __ipr_remove(pdev);
7484 return rc;
7487 scsi_scan_host(ioa_cfg->host);
7488 ipr_scan_vsets(ioa_cfg);
7489 scsi_add_device(ioa_cfg->host, IPR_IOA_BUS, IPR_IOA_TARGET, IPR_IOA_LUN);
7490 ioa_cfg->allow_ml_add_del = 1;
7491 ioa_cfg->host->max_channel = IPR_VSET_BUS;
7492 schedule_work(&ioa_cfg->work_q);
7493 return 0;
7497 * ipr_shutdown - Shutdown handler.
7498 * @pdev: pci device struct
7500 * This function is invoked upon system shutdown/reboot. It will issue
7501 * an adapter shutdown to the adapter to flush the write cache.
7503 * Return value:
7504 * none
7506 static void ipr_shutdown(struct pci_dev *pdev)
7508 struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
7509 unsigned long lock_flags = 0;
7511 spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
7512 ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL);
7513 spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
7514 wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
7517 static struct pci_device_id ipr_pci_table[] __devinitdata = {
7518 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
7519 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5702,
7520 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7521 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
7522 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5703,
7523 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7524 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
7525 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573D,
7526 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7527 { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE,
7528 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573E,
7529 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7530 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
7531 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571B,
7532 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7533 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
7534 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572E,
7535 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7536 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
7537 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A,
7538 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7539 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
7540 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B,
7541 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7542 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
7543 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A,
7544 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7545 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
7546 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B,
7547 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7548 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
7549 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C,
7550 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7551 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
7552 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A,
7553 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7554 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
7555 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B,
7556 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7557 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
7558 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C,
7559 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7560 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
7561 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B8,
7562 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7563 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
7564 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7,
7565 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
7566 { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE,
7567 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780,
7568 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
7569 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
7570 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E,
7571 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
7572 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
7573 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F,
7574 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
7575 { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
7576 PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F,
7577 0, 0, (kernel_ulong_t)&ipr_chip_cfg[1] },
7580 MODULE_DEVICE_TABLE(pci, ipr_pci_table);
7582 static struct pci_error_handlers ipr_err_handler = {
7583 .error_detected = ipr_pci_error_detected,
7584 .slot_reset = ipr_pci_slot_reset,
7587 static struct pci_driver ipr_driver = {
7588 .name = IPR_NAME,
7589 .id_table = ipr_pci_table,
7590 .probe = ipr_probe,
7591 .remove = ipr_remove,
7592 .shutdown = ipr_shutdown,
7593 .err_handler = &ipr_err_handler,
7597 * ipr_init - Module entry point
7599 * Return value:
7600 * 0 on success / negative value on failure
7602 static int __init ipr_init(void)
7604 ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n",
7605 IPR_DRIVER_VERSION, IPR_DRIVER_DATE);
7607 return pci_register_driver(&ipr_driver);
7611 * ipr_exit - Module unload
7613 * Module unload entry point.
7615 * Return value:
7616 * none
7618 static void __exit ipr_exit(void)
7620 pci_unregister_driver(&ipr_driver);
7623 module_init(ipr_init);
7624 module_exit(ipr_exit);