iwlwifi: incorrect method used for finding valid OTP blocks

[firewire-audio.git] / drivers / net / wireless / iwlwifi / iwl-eeprom.c

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2005 - 2009 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/


#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>

#include <net/mac80211.h>

#include "iwl-commands.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-debug.h"
#include "iwl-eeprom.h"
#include "iwl-io.h"

/************************** EEPROM BANDS ****************************
 *
 * The iwl_eeprom_band definitions below provide the mapping from the
 * EEPROM contents to the specific channel number supported for each
 * band.
 *
 * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3
 * definition below maps to physical channel 42 in the 5.2GHz spectrum.
 * The specific geography and calibration information for that channel
 * is contained in the eeprom map itself.
 *
 * During init, we copy the eeprom information and channel map
 * information into priv->channel_info_24/52 and priv->channel_map_24/52
 *
 * channel_map_24/52 provides the index in the channel_info array for a
 * given channel.  We have to have two separate maps as there is channel
 * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
 * band_2
 *
 * A value of 0xff stored in the channel_map indicates that the channel
 * is not supported by the hardware at all.
 *
 * A value of 0xfe in the channel_map indicates that the channel is not
 * valid for Tx with the current hardware.  This means that
 * while the system can tune and receive on a given channel, it may not
 * be able to associate or transmit any frames on that
 * channel.  There is no corresponding channel information for that
 * entry.
 *
 *********************************************************************/

/* 2.4 GHz */
const u8 iwl_eeprom_band_1[14] = {
        1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
};

/* 5.2 GHz bands */
static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */
        183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
};

static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */
        34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
};

static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */
        100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
};

static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */
        145, 149, 153, 157, 161, 165
};

static const u8 iwl_eeprom_band_6[] = {       /* 2.4 ht40 channel */
        1, 2, 3, 4, 5, 6, 7
};

static const u8 iwl_eeprom_band_7[] = {       /* 5.2 ht40 channel */
        36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
};

/**
 * struct iwl_txpwr_section: eeprom section information
 * @offset: indirect address into eeprom image
 * @count: number of "struct iwl_eeprom_enhanced_txpwr" in this section
 * @band: band type for the section
 * @is_common - true: common section, false: channel section
 * @is_cck - true: cck section, false: not cck section
 * @is_ht_40 - true: all channel in the section are HT40 channel,
 *             false: legacy or HT 20 MHz
 *             ignore if it is common section
 * @iwl_eeprom_section_channel: channel array in the section,
 *             ignore if common section
 */
struct iwl_txpwr_section {
        u32 offset;
        u8 count;
        enum ieee80211_band band;
        bool is_common;
        bool is_cck;
        bool is_ht40;
        u8 iwl_eeprom_section_channel[EEPROM_MAX_TXPOWER_SECTION_ELEMENTS];
};

/**
 * section 1 - 3 are regulatory tx power apply to all channels based on
 *    modulation: CCK, OFDM
 *    Band: 2.4GHz, 5.2GHz
 * section 4 - 10 are regulatory tx power apply to specified channels
 *    For example:
 *      1L - Channel 1 Legacy
 *      1HT - Channel 1 HT
 *      (1,+1) - Channel 1 HT40 "_above_"
 *
 * Section 1: all CCK channels
 * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40) channels
 * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
 * Section 4: 2.4 GHz 20MHz channels: 1L, 1HT, 2L, 2HT, 10L, 10HT, 11L, 11HT
 * Section 5: 2.4 GHz 40MHz channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1)
 * Section 6: 5.2 GHz 20MHz channels: 36L, 64L, 100L, 36HT, 64HT, 100HT
 * Section 7: 5.2 GHz 40MHz channels: (36,+1) (60,+1) (100,+1)
 * Section 8: 2.4 GHz channel: 13L, 13HT
 * Section 9: 2.4 GHz channel: 140L, 140HT
 * Section 10: 2.4 GHz 40MHz channels: (132,+1)  (44,+1)
 *
 */
static const struct iwl_txpwr_section enhinfo[] = {
        { EEPROM_LB_CCK_20_COMMON, 1, IEEE80211_BAND_2GHZ, true, true, false },
        { EEPROM_LB_OFDM_COMMON, 3, IEEE80211_BAND_2GHZ, true, false, false },
        { EEPROM_HB_OFDM_COMMON, 3, IEEE80211_BAND_5GHZ, true, false, false },
        { EEPROM_LB_OFDM_20_BAND, 8, IEEE80211_BAND_2GHZ,
                false, false, false,
                {1, 1, 2, 2, 10, 10, 11, 11 } },
        { EEPROM_LB_OFDM_HT40_BAND, 5, IEEE80211_BAND_2GHZ,
                false, false, true,
                { 1, 2, 6, 7, 9 } },
        { EEPROM_HB_OFDM_20_BAND, 6, IEEE80211_BAND_5GHZ,
                false, false, false,
                { 36, 64, 100, 36, 64, 100 } },
        { EEPROM_HB_OFDM_HT40_BAND, 3, IEEE80211_BAND_5GHZ,
                false, false, true,
                { 36, 60, 100 } },
        { EEPROM_LB_OFDM_20_CHANNEL_13, 2, IEEE80211_BAND_2GHZ,
                false, false, false,
                { 13, 13 } },
        { EEPROM_HB_OFDM_20_CHANNEL_140, 2, IEEE80211_BAND_5GHZ,
                false, false, false,
                { 140, 140 } },
        { EEPROM_HB_OFDM_HT40_BAND_1, 2, IEEE80211_BAND_5GHZ,
                false, false, true,
                { 132, 44 } },
};

/******************************************************************************
 *
 * EEPROM related functions
 *
******************************************************************************/

int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
{
        u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
        if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
                IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
                return -ENOENT;
        }
        return 0;
}
EXPORT_SYMBOL(iwlcore_eeprom_verify_signature);

static void iwl_set_otp_access(struct iwl_priv *priv, enum iwl_access_mode mode)
{
        u32 otpgp;

        otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
        if (mode == IWL_OTP_ACCESS_ABSOLUTE)
                iwl_clear_bit(priv, CSR_OTP_GP_REG,
                                CSR_OTP_GP_REG_OTP_ACCESS_MODE);
        else
                iwl_set_bit(priv, CSR_OTP_GP_REG,
                                CSR_OTP_GP_REG_OTP_ACCESS_MODE);
}

static int iwlcore_get_nvm_type(struct iwl_priv *priv)
{
        u32 otpgp;
        int nvm_type;

        /* OTP only valid for CP/PP and after */
        switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
        case CSR_HW_REV_TYPE_NONE:
                IWL_ERR(priv, "Unknown hardware type\n");
                return -ENOENT;
        case CSR_HW_REV_TYPE_3945:
        case CSR_HW_REV_TYPE_4965:
        case CSR_HW_REV_TYPE_5300:
        case CSR_HW_REV_TYPE_5350:
        case CSR_HW_REV_TYPE_5100:
        case CSR_HW_REV_TYPE_5150:
                nvm_type = NVM_DEVICE_TYPE_EEPROM;
                break;
        default:
                otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
                if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT)
                        nvm_type = NVM_DEVICE_TYPE_OTP;
                else
                        nvm_type = NVM_DEVICE_TYPE_EEPROM;
                break;
        }
        return  nvm_type;
}

/*
 * The device's EEPROM semaphore prevents conflicts between driver and uCode
 * when accessing the EEPROM; each access is a series of pulses to/from the
 * EEPROM chip, not a single event, so even reads could conflict if they
 * weren't arbitrated by the semaphore.
 */
int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv)
{
        u16 count;
        int ret;

        for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
                /* Request semaphore */
                iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
                            CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);

                /* See if we got it */
                ret = iwl_poll_direct_bit(priv, CSR_HW_IF_CONFIG_REG,
                                CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
                                EEPROM_SEM_TIMEOUT);
                if (ret >= 0) {
                        IWL_DEBUG_IO(priv, "Acquired semaphore after %d tries.\n",
                                count+1);
                        return ret;
                }
        }

        return ret;
}
EXPORT_SYMBOL(iwlcore_eeprom_acquire_semaphore);

void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv)
{
        iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
                CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);

}
EXPORT_SYMBOL(iwlcore_eeprom_release_semaphore);

const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
{
        BUG_ON(offset >= priv->cfg->eeprom_size);
        return &priv->eeprom[offset];
}
EXPORT_SYMBOL(iwlcore_eeprom_query_addr);

static int iwl_init_otp_access(struct iwl_priv *priv)
{
        int ret;

        /* Enable 40MHz radio clock */
        _iwl_write32(priv, CSR_GP_CNTRL,
                     _iwl_read32(priv, CSR_GP_CNTRL) |
                     CSR_GP_CNTRL_REG_FLAG_INIT_DONE);

        /* wait for clock to be ready */
        ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
                                  CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
                                  25000);
        if (ret < 0)
                IWL_ERR(priv, "Time out access OTP\n");
        else {
                iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
                                  APMG_PS_CTRL_VAL_RESET_REQ);
                udelay(5);
                iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
                                    APMG_PS_CTRL_VAL_RESET_REQ);
        }
        return ret;
}

static int iwl_read_otp_word(struct iwl_priv *priv, u16 addr, u16 *eeprom_data)
{
        int ret = 0;
        u32 r;
        u32 otpgp;

        _iwl_write32(priv, CSR_EEPROM_REG,
                     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
        ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
                                  CSR_EEPROM_REG_READ_VALID_MSK,
                                  IWL_EEPROM_ACCESS_TIMEOUT);
        if (ret < 0) {
                IWL_ERR(priv, "Time out reading OTP[%d]\n", addr);
                return ret;
        }
        r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
        /* check for ECC errors: */
        otpgp = iwl_read32(priv, CSR_OTP_GP_REG);
        if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
                /* stop in this case */
                /* set the uncorrectable OTP ECC bit for acknowledgement */
                iwl_set_bit(priv, CSR_OTP_GP_REG,
                        CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
                IWL_ERR(priv, "Uncorrectable OTP ECC error, abort OTP read\n");
                return -EINVAL;
        }
        if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
                /* continue in this case */
                /* set the correctable OTP ECC bit for acknowledgement */
                iwl_set_bit(priv, CSR_OTP_GP_REG,
                                CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
                IWL_ERR(priv, "Correctable OTP ECC error, continue read\n");
        }
        *eeprom_data = le16_to_cpu((__force __le16)(r >> 16));
        return 0;
}

/*
 * iwl_is_otp_empty: check for empty OTP
 */
static bool iwl_is_otp_empty(struct iwl_priv *priv)
{
        u16 next_link_addr = 0, link_value;
        bool is_empty = false;

        /* locate the beginning of OTP link list */
        if (!iwl_read_otp_word(priv, next_link_addr, &link_value)) {
                if (!link_value) {
                        IWL_ERR(priv, "OTP is empty\n");
                        is_empty = true;
                }
        } else {
                IWL_ERR(priv, "Unable to read first block of OTP list.\n");
                is_empty = true;
        }

        return is_empty;
}


/*
 * iwl_find_otp_image: find EEPROM image in OTP
 *   finding the OTP block that contains the EEPROM image.
 *   the last valid block on the link list (the block _before_ the last block)
 *   is the block we should read and used to configure the device.
 *   If all the available OTP blocks are full, the last block will be the block
 *   we should read and used to configure the device.
 *   only perform this operation if shadow RAM is disabled
 */
static int iwl_find_otp_image(struct iwl_priv *priv,
                                        u16 *validblockaddr)
{
        u16 next_link_addr = 0, link_value = 0, valid_addr;
        int usedblocks = 0;

        /* set addressing mode to absolute to traverse the link list */
        iwl_set_otp_access(priv, IWL_OTP_ACCESS_ABSOLUTE);

        /* checking for empty OTP or error */
        if (iwl_is_otp_empty(priv))
                return -EINVAL;

        /*
         * start traverse link list
         * until reach the max number of OTP blocks
         * different devices have different number of OTP blocks
         */
        do {
                /* save current valid block address
                 * check for more block on the link list
                 */
                valid_addr = next_link_addr;
                next_link_addr = link_value * sizeof(u16);
                IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
                               usedblocks, next_link_addr);
                if (iwl_read_otp_word(priv, next_link_addr, &link_value))
                        return -EINVAL;
                if (!link_value) {
                        /*
                         * reach the end of link list, return success and
                         * set address point to the starting address
                         * of the image
                         */
                        *validblockaddr = valid_addr;
                        /* skip first 2 bytes (link list pointer) */
                        *validblockaddr += 2;
                        return 0;
                }
                /* more in the link list, continue */
                usedblocks++;
        } while (usedblocks <= priv->cfg->max_ll_items);

        /* OTP has no valid blocks */
        IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n");
        return -EINVAL;
}

/**
 * iwl_eeprom_init - read EEPROM contents
 *
 * Load the EEPROM contents from adapter into priv->eeprom
 *
 * NOTE:  This routine uses the non-debug IO access functions.
 */
int iwl_eeprom_init(struct iwl_priv *priv)
{
        u16 *e;
        u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
        int sz;
        int ret;
        u16 addr;
        u16 validblockaddr = 0;
        u16 cache_addr = 0;

        priv->nvm_device_type = iwlcore_get_nvm_type(priv);
        if (priv->nvm_device_type == -ENOENT)
                return -ENOENT;
        /* allocate eeprom */
        IWL_DEBUG_INFO(priv, "NVM size = %d\n", priv->cfg->eeprom_size);
        sz = priv->cfg->eeprom_size;
        priv->eeprom = kzalloc(sz, GFP_KERNEL);
        if (!priv->eeprom) {
                ret = -ENOMEM;
                goto alloc_err;
        }
        e = (u16 *)priv->eeprom;

        ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
        if (ret < 0) {
                IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
                ret = -ENOENT;
                goto err;
        }

        /* Make sure driver (instead of uCode) is allowed to read EEPROM */
        ret = priv->cfg->ops->lib->eeprom_ops.acquire_semaphore(priv);
        if (ret < 0) {
                IWL_ERR(priv, "Failed to acquire EEPROM semaphore.\n");
                ret = -ENOENT;
                goto err;
        }
        if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) {
                ret = iwl_init_otp_access(priv);
                if (ret) {
                        IWL_ERR(priv, "Failed to initialize OTP access.\n");
                        ret = -ENOENT;
                        goto done;
                }
                _iwl_write32(priv, CSR_EEPROM_GP,
                             iwl_read32(priv, CSR_EEPROM_GP) &
                             ~CSR_EEPROM_GP_IF_OWNER_MSK);

                iwl_set_bit(priv, CSR_OTP_GP_REG,
                             CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
                             CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
                /* traversing the linked list if no shadow ram supported */
                if (!priv->cfg->shadow_ram_support) {
                        if (iwl_find_otp_image(priv, &validblockaddr)) {
                                ret = -ENOENT;
                                goto done;
                        }
                }
                for (addr = validblockaddr; addr < validblockaddr + sz;
                     addr += sizeof(u16)) {
                        u16 eeprom_data;

                        ret = iwl_read_otp_word(priv, addr, &eeprom_data);
                        if (ret)
                                goto done;
                        e[cache_addr / 2] = eeprom_data;
                        cache_addr += sizeof(u16);
                }
        } else {
                /* eeprom is an array of 16bit values */
                for (addr = 0; addr < sz; addr += sizeof(u16)) {
                        u32 r;

                        _iwl_write32(priv, CSR_EEPROM_REG,
                                     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));

                        ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
                                                  CSR_EEPROM_REG_READ_VALID_MSK,
                                                  IWL_EEPROM_ACCESS_TIMEOUT);
                        if (ret < 0) {
                                IWL_ERR(priv, "Time out reading EEPROM[%d]\n", addr);
                                goto done;
                        }
                        r = _iwl_read_direct32(priv, CSR_EEPROM_REG);
                        e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
                }
        }
        ret = 0;
done:
        priv->cfg->ops->lib->eeprom_ops.release_semaphore(priv);
err:
        if (ret)
                iwl_eeprom_free(priv);
alloc_err:
        return ret;
}
EXPORT_SYMBOL(iwl_eeprom_init);

void iwl_eeprom_free(struct iwl_priv *priv)
{
        kfree(priv->eeprom);
        priv->eeprom = NULL;
}
EXPORT_SYMBOL(iwl_eeprom_free);

int iwl_eeprom_check_version(struct iwl_priv *priv)
{
        u16 eeprom_ver;
        u16 calib_ver;

        eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
        calib_ver = priv->cfg->ops->lib->eeprom_ops.calib_version(priv);

        if (eeprom_ver < priv->cfg->eeprom_ver ||
            calib_ver < priv->cfg->eeprom_calib_ver)
                goto err;

        return 0;
err:
        IWL_ERR(priv, "Unsupported (too old) EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
                  eeprom_ver, priv->cfg->eeprom_ver,
                  calib_ver,  priv->cfg->eeprom_calib_ver);
        return -EINVAL;

}
EXPORT_SYMBOL(iwl_eeprom_check_version);

const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
{
        return priv->cfg->ops->lib->eeprom_ops.query_addr(priv, offset);
}
EXPORT_SYMBOL(iwl_eeprom_query_addr);

u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
{
        if (!priv->eeprom)
                return 0;
        return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8);
}
EXPORT_SYMBOL(iwl_eeprom_query16);

void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac)
{
        const u8 *addr = priv->cfg->ops->lib->eeprom_ops.query_addr(priv,
                                        EEPROM_MAC_ADDRESS);
        memcpy(mac, addr, ETH_ALEN);
}
EXPORT_SYMBOL(iwl_eeprom_get_mac);

static void iwl_init_band_reference(const struct iwl_priv *priv,
                        int eep_band, int *eeprom_ch_count,
                        const struct iwl_eeprom_channel **eeprom_ch_info,
                        const u8 **eeprom_ch_index)
{
        u32 offset = priv->cfg->ops->lib->
                        eeprom_ops.regulatory_bands[eep_band - 1];
        switch (eep_band) {
        case 1:         /* 2.4GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(priv, offset);
                *eeprom_ch_index = iwl_eeprom_band_1;
                break;
        case 2:         /* 4.9GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(priv, offset);
                *eeprom_ch_index = iwl_eeprom_band_2;
                break;
        case 3:         /* 5.2GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(priv, offset);
                *eeprom_ch_index = iwl_eeprom_band_3;
                break;
        case 4:         /* 5.5GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(priv, offset);
                *eeprom_ch_index = iwl_eeprom_band_4;
                break;
        case 5:         /* 5.7GHz band */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(priv, offset);
                *eeprom_ch_index = iwl_eeprom_band_5;
                break;
        case 6:         /* 2.4GHz ht40 channels */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(priv, offset);
                *eeprom_ch_index = iwl_eeprom_band_6;
                break;
        case 7:         /* 5 GHz ht40 channels */
                *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
                *eeprom_ch_info = (struct iwl_eeprom_channel *)
                                iwl_eeprom_query_addr(priv, offset);
                *eeprom_ch_index = iwl_eeprom_band_7;
                break;
        default:
                BUG();
                return;
        }
}

#define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \
                            ? # x " " : "")

/**
 * iwl_mod_ht40_chan_info - Copy ht40 channel info into driver's priv.
 *
 * Does not set up a command, or touch hardware.
 */
static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
                              enum ieee80211_band band, u16 channel,
                              const struct iwl_eeprom_channel *eeprom_ch,
                              u8 clear_ht40_extension_channel)
{
        struct iwl_channel_info *ch_info;

        ch_info = (struct iwl_channel_info *)
                        iwl_get_channel_info(priv, band, channel);

        if (!is_channel_valid(ch_info))
                return -1;

        IWL_DEBUG_INFO(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
                        " Ad-Hoc %ssupported\n",
                        ch_info->channel,
                        is_channel_a_band(ch_info) ?
                        "5.2" : "2.4",
                        CHECK_AND_PRINT(IBSS),
                        CHECK_AND_PRINT(ACTIVE),
                        CHECK_AND_PRINT(RADAR),
                        CHECK_AND_PRINT(WIDE),
                        CHECK_AND_PRINT(DFS),
                        eeprom_ch->flags,
                        eeprom_ch->max_power_avg,
                        ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS)
                         && !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ?
                        "" : "not ");

        ch_info->ht40_eeprom = *eeprom_ch;
        ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
        ch_info->ht40_curr_txpow = eeprom_ch->max_power_avg;
        ch_info->ht40_min_power = 0;
        ch_info->ht40_scan_power = eeprom_ch->max_power_avg;
        ch_info->ht40_flags = eeprom_ch->flags;
        ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel;

        return 0;
}

/**
 * iwl_get_max_txpower_avg - get the highest tx power from all chains.
 *     find the highest tx power from all chains for the channel
 */
static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
                struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, int element)
{
        s8 max_txpower_avg = 0; /* (dBm) */

        IWL_DEBUG_INFO(priv, "%d - "
                        "chain_a: %d dB chain_b: %d dB "
                        "chain_c: %d dB mimo2: %d dB mimo3: %d dB\n",
                        element,
                        enhanced_txpower[element].chain_a_max >> 1,
                        enhanced_txpower[element].chain_b_max >> 1,
                        enhanced_txpower[element].chain_c_max >> 1,
                        enhanced_txpower[element].mimo2_max >> 1,
                        enhanced_txpower[element].mimo3_max >> 1);
        /* Take the highest tx power from any valid chains */
        if ((priv->cfg->valid_tx_ant & ANT_A) &&
            (enhanced_txpower[element].chain_a_max > max_txpower_avg))
                max_txpower_avg = enhanced_txpower[element].chain_a_max;
        if ((priv->cfg->valid_tx_ant & ANT_B) &&
            (enhanced_txpower[element].chain_b_max > max_txpower_avg))
                max_txpower_avg = enhanced_txpower[element].chain_b_max;
        if ((priv->cfg->valid_tx_ant & ANT_C) &&
            (enhanced_txpower[element].chain_c_max > max_txpower_avg))
                max_txpower_avg = enhanced_txpower[element].chain_c_max;
        if (((priv->cfg->valid_tx_ant == ANT_AB) |
            (priv->cfg->valid_tx_ant == ANT_BC) |
            (priv->cfg->valid_tx_ant == ANT_AC)) &&
            (enhanced_txpower[element].mimo2_max > max_txpower_avg))
                max_txpower_avg =  enhanced_txpower[element].mimo2_max;
        if ((priv->cfg->valid_tx_ant == ANT_ABC) &&
            (enhanced_txpower[element].mimo3_max > max_txpower_avg))
                max_txpower_avg = enhanced_txpower[element].mimo3_max;

        /* max. tx power in EEPROM is in 1/2 dBm format
         * convert from 1/2 dBm to dBm
         */
        return max_txpower_avg >> 1;
}

/**
 * iwl_update_common_txpower: update channel tx power
 *     update tx power per band based on EEPROM enhanced tx power info.
 */
static s8 iwl_update_common_txpower(struct iwl_priv *priv,
                struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
                int section, int element)
{
        struct iwl_channel_info *ch_info;
        int ch;
        bool is_ht40 = false;
        s8 max_txpower_avg; /* (dBm) */

        /* it is common section, contain all type (Legacy, HT and HT40)
         * based on the element in the section to determine
         * is it HT 40 or not
         */
        if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX)
                is_ht40 = true;
        max_txpower_avg =
                iwl_get_max_txpower_avg(priv, enhanced_txpower, element);
        ch_info = priv->channel_info;

        for (ch = 0; ch < priv->channel_count; ch++) {
                /* find matching band and update tx power if needed */
                if ((ch_info->band == enhinfo[section].band) &&
                    (ch_info->max_power_avg < max_txpower_avg) && (!is_ht40)) {
                        /* Update regulatory-based run-time data */
                        ch_info->max_power_avg = ch_info->curr_txpow =
                            max_txpower_avg;
                        ch_info->scan_power = max_txpower_avg;
                }
                if ((ch_info->band == enhinfo[section].band) && is_ht40 &&
                    ch_info->ht40_max_power_avg &&
                    (ch_info->ht40_max_power_avg < max_txpower_avg)) {
                        /* Update regulatory-based run-time data */
                        ch_info->ht40_max_power_avg = max_txpower_avg;
                        ch_info->ht40_curr_txpow = max_txpower_avg;
                        ch_info->ht40_scan_power = max_txpower_avg;
                }
                ch_info++;
        }
        return max_txpower_avg;
}

/**
 * iwl_update_channel_txpower: update channel tx power
 *      update channel tx power based on EEPROM enhanced tx power info.
 */
static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
                struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
                int section, int element)
{
        struct iwl_channel_info *ch_info;
        int ch;
        u8 channel;
        s8 max_txpower_avg; /* (dBm) */

        channel = enhinfo[section].iwl_eeprom_section_channel[element];
        max_txpower_avg =
                iwl_get_max_txpower_avg(priv, enhanced_txpower, element);

        ch_info = priv->channel_info;
        for (ch = 0; ch < priv->channel_count; ch++) {
                /* find matching channel and update tx power if needed */
                if (ch_info->channel == channel) {
                        if ((ch_info->max_power_avg < max_txpower_avg) &&
                            (!enhinfo[section].is_ht40)) {
                                /* Update regulatory-based run-time data */
                                ch_info->max_power_avg = max_txpower_avg;
                                ch_info->curr_txpow = max_txpower_avg;
                                ch_info->scan_power = max_txpower_avg;
                        }
                        if ((enhinfo[section].is_ht40) &&
                            (ch_info->ht40_max_power_avg) &&
                            (ch_info->ht40_max_power_avg < max_txpower_avg)) {
                                /* Update regulatory-based run-time data */
                                ch_info->ht40_max_power_avg = max_txpower_avg;
                                ch_info->ht40_curr_txpow = max_txpower_avg;
                                ch_info->ht40_scan_power = max_txpower_avg;
                        }
                        break;
                }
                ch_info++;
        }
        return max_txpower_avg;
}

/**
 * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
 */
void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
{
        int eeprom_section_count = 0;
        int section, element;
        struct iwl_eeprom_enhanced_txpwr *enhanced_txpower;
        u32 offset;
        s8 max_txpower_avg; /* (dBm) */

        /* Loop through all the sections
         * adjust bands and channel's max tx power
         * Set the tx_power_user_lmt to the highest power
         * supported by any channels and chains
         */
        for (section = 0; section < ARRAY_SIZE(enhinfo); section++) {
                eeprom_section_count = enhinfo[section].count;
                offset = enhinfo[section].offset;
                enhanced_txpower = (struct iwl_eeprom_enhanced_txpwr *)
                                iwl_eeprom_query_addr(priv, offset);

                for (element = 0; element < eeprom_section_count; element++) {
                        if (enhinfo[section].is_common)
                                max_txpower_avg =
                                        iwl_update_common_txpower(priv,
                                        enhanced_txpower, section, element);
                        else
                                max_txpower_avg =
                                        iwl_update_channel_txpower(priv,
                                        enhanced_txpower, section, element);

                        /* Update the tx_power_user_lmt to the highest power
                         * supported by any channel */
                        if (max_txpower_avg > priv->tx_power_user_lmt)
                                priv->tx_power_user_lmt = max_txpower_avg;
                }
        }
}
EXPORT_SYMBOL(iwlcore_eeprom_enhanced_txpower);

#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
                            ? # x " " : "")

/**
 * iwl_init_channel_map - Set up driver's info for all possible channels
 */
int iwl_init_channel_map(struct iwl_priv *priv)
{
        int eeprom_ch_count = 0;
        const u8 *eeprom_ch_index = NULL;
        const struct iwl_eeprom_channel *eeprom_ch_info = NULL;
        int band, ch;
        struct iwl_channel_info *ch_info;

        if (priv->channel_count) {
                IWL_DEBUG_INFO(priv, "Channel map already initialized.\n");
                return 0;
        }

        IWL_DEBUG_INFO(priv, "Initializing regulatory info from EEPROM\n");

        priv->channel_count =
            ARRAY_SIZE(iwl_eeprom_band_1) +
            ARRAY_SIZE(iwl_eeprom_band_2) +
            ARRAY_SIZE(iwl_eeprom_band_3) +
            ARRAY_SIZE(iwl_eeprom_band_4) +
            ARRAY_SIZE(iwl_eeprom_band_5);

        IWL_DEBUG_INFO(priv, "Parsing data for %d channels.\n", priv->channel_count);

        priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) *
                                     priv->channel_count, GFP_KERNEL);
        if (!priv->channel_info) {
                IWL_ERR(priv, "Could not allocate channel_info\n");
                priv->channel_count = 0;
                return -ENOMEM;
        }

        ch_info = priv->channel_info;

        /* Loop through the 5 EEPROM bands adding them in order to the
         * channel map we maintain (that contains additional information than
         * what just in the EEPROM) */
        for (band = 1; band <= 5; band++) {

                iwl_init_band_reference(priv, band, &eeprom_ch_count,
                                        &eeprom_ch_info, &eeprom_ch_index);

                /* Loop through each band adding each of the channels */
                for (ch = 0; ch < eeprom_ch_count; ch++) {
                        ch_info->channel = eeprom_ch_index[ch];
                        ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
                            IEEE80211_BAND_5GHZ;

                        /* permanently store EEPROM's channel regulatory flags
                         *   and max power in channel info database. */
                        ch_info->eeprom = eeprom_ch_info[ch];

                        /* Copy the run-time flags so they are there even on
                         * invalid channels */
                        ch_info->flags = eeprom_ch_info[ch].flags;
                        /* First write that ht40 is not enabled, and then enable
                         * one by one */
                        ch_info->ht40_extension_channel =
                                        IEEE80211_CHAN_NO_HT40;

                        if (!(is_channel_valid(ch_info))) {
                                IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
                                               "No traffic\n",
                                               ch_info->channel,
                                               ch_info->flags,
                                               is_channel_a_band(ch_info) ?
                                               "5.2" : "2.4");
                                ch_info++;
                                continue;
                        }

                        /* Initialize regulatory-based run-time data */
                        ch_info->max_power_avg = ch_info->curr_txpow =
                            eeprom_ch_info[ch].max_power_avg;
                        ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
                        ch_info->min_power = 0;

                        IWL_DEBUG_INFO(priv, "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
                                       " Ad-Hoc %ssupported\n",
                                       ch_info->channel,
                                       is_channel_a_band(ch_info) ?
                                       "5.2" : "2.4",
                                       CHECK_AND_PRINT_I(VALID),
                                       CHECK_AND_PRINT_I(IBSS),
                                       CHECK_AND_PRINT_I(ACTIVE),
                                       CHECK_AND_PRINT_I(RADAR),
                                       CHECK_AND_PRINT_I(WIDE),
                                       CHECK_AND_PRINT_I(DFS),
                                       eeprom_ch_info[ch].flags,
                                       eeprom_ch_info[ch].max_power_avg,
                                       ((eeprom_ch_info[ch].
                                         flags & EEPROM_CHANNEL_IBSS)
                                        && !(eeprom_ch_info[ch].
                                             flags & EEPROM_CHANNEL_RADAR))
                                       ? "" : "not ");

                        /* Set the tx_power_user_lmt to the highest power
                         * supported by any channel */
                        if (eeprom_ch_info[ch].max_power_avg >
                                                priv->tx_power_user_lmt)
                                priv->tx_power_user_lmt =
                                    eeprom_ch_info[ch].max_power_avg;

                        ch_info++;
                }
        }

        /* Check if we do have HT40 channels */
        if (priv->cfg->ops->lib->eeprom_ops.regulatory_bands[5] ==
            EEPROM_REGULATORY_BAND_NO_HT40 &&
            priv->cfg->ops->lib->eeprom_ops.regulatory_bands[6] ==
            EEPROM_REGULATORY_BAND_NO_HT40)
                return 0;

        /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
        for (band = 6; band <= 7; band++) {
                enum ieee80211_band ieeeband;

                iwl_init_band_reference(priv, band, &eeprom_ch_count,
                                        &eeprom_ch_info, &eeprom_ch_index);

                /* EEPROM band 6 is 2.4, band 7 is 5 GHz */
                ieeeband =
                        (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;

                /* Loop through each band adding each of the channels */
                for (ch = 0; ch < eeprom_ch_count; ch++) {
                        /* Set up driver's info for lower half */
                        iwl_mod_ht40_chan_info(priv, ieeeband,
                                                eeprom_ch_index[ch],
                                                &eeprom_ch_info[ch],
                                                IEEE80211_CHAN_NO_HT40PLUS);

                        /* Set up driver's info for upper half */
                        iwl_mod_ht40_chan_info(priv, ieeeband,
                                                eeprom_ch_index[ch] + 4,
                                                &eeprom_ch_info[ch],
                                                IEEE80211_CHAN_NO_HT40MINUS);
                }
        }

        /* for newer device (6000 series and up)
         * EEPROM contain enhanced tx power information
         * driver need to process addition information
         * to determine the max channel tx power limits
         */
        if (priv->cfg->ops->lib->eeprom_ops.update_enhanced_txpower)
                priv->cfg->ops->lib->eeprom_ops.update_enhanced_txpower(priv);

        return 0;
}
EXPORT_SYMBOL(iwl_init_channel_map);

/*
 * iwl_free_channel_map - undo allocations in iwl_init_channel_map
 */
void iwl_free_channel_map(struct iwl_priv *priv)
{
        kfree(priv->channel_info);
        priv->channel_count = 0;
}
EXPORT_SYMBOL(iwl_free_channel_map);

/**
 * iwl_get_channel_info - Find driver's private channel info
 *
 * Based on band and channel number.
 */
const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv,
                                        enum ieee80211_band band, u16 channel)
{
        int i;

        switch (band) {
        case IEEE80211_BAND_5GHZ:
                for (i = 14; i < priv->channel_count; i++) {
                        if (priv->channel_info[i].channel == channel)
                                return &priv->channel_info[i];
                }
                break;
        case IEEE80211_BAND_2GHZ:
                if (channel >= 1 && channel <= 14)
                        return &priv->channel_info[channel - 1];
                break;
        default:
                BUG();
        }

        return NULL;
}
EXPORT_SYMBOL(iwl_get_channel_info);