include/linux/phy.h

   1 /*
   2  * include/linux/phy.h
   3  *
   4  * Framework and drivers for configuring and reading different PHYs
   5  * Based on code in sungem_phy.c and gianfar_phy.c
   6  *
   7  * Author: Andy Fleming
   8  *
   9  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  10  *
  11  * This program is free software; you can redistribute  it and/or modify it
  12  * under  the terms of  the GNU General  Public License as published by the
  13  * Free Software Foundation;  either version 2 of the  License, or (at your
  14  * option) any later version.
  15  *
  16  */
  17
  18 #ifndef __PHY_H
  19 #define __PHY_H
  20
  21 #include <linux/spinlock.h>
  22 #include <linux/device.h>
  23 #include <linux/ethtool.h>
  24 #include <linux/mii.h>
  25 #include <linux/timer.h>
  26 #include <linux/workqueue.h>
  27
  28 #include <asm/atomic.h>
  29
  30 #define PHY_BASIC_FEATURES      (SUPPORTED_10baseT_Half | \
  31                                  SUPPORTED_10baseT_Full | \
  32                                  SUPPORTED_100baseT_Half | \
  33                                  SUPPORTED_100baseT_Full | \
  34                                  SUPPORTED_Autoneg | \
  35                                  SUPPORTED_TP | \
  36                                  SUPPORTED_MII)
  37
  38 #define PHY_GBIT_FEATURES       (PHY_BASIC_FEATURES | \
  39                                  SUPPORTED_1000baseT_Half | \
  40                                  SUPPORTED_1000baseT_Full)
  41
  42 /* Set phydev->irq to PHY_POLL if interrupts are not supported,
  43  * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
  44  * the attached driver handles the interrupt
  45  */
  46 #define PHY_POLL                -1
  47 #define PHY_IGNORE_INTERRUPT    -2
  48
  49 #define PHY_HAS_INTERRUPT       0x00000001
  50 #define PHY_HAS_MAGICANEG       0x00000002
  51
  52 /* Interface Mode definitions */
  53 typedef enum {
  54         PHY_INTERFACE_MODE_MII,
  55         PHY_INTERFACE_MODE_GMII,
  56         PHY_INTERFACE_MODE_SGMII,
  57         PHY_INTERFACE_MODE_TBI,
  58         PHY_INTERFACE_MODE_RMII,
  59         PHY_INTERFACE_MODE_RGMII,
  60         PHY_INTERFACE_MODE_RGMII_ID,
  61         PHY_INTERFACE_MODE_RGMII_RXID,
  62         PHY_INTERFACE_MODE_RGMII_TXID,
  63         PHY_INTERFACE_MODE_RTBI
  64 } phy_interface_t;
  65
  66 #define MII_BUS_MAX 4
  67
  68
  69 #define PHY_INIT_TIMEOUT        100000
  70 #define PHY_STATE_TIME          1
  71 #define PHY_FORCE_TIMEOUT       10
  72 #define PHY_AN_TIMEOUT          10
  73
  74 #define PHY_MAX_ADDR    32
  75
  76 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */
  77 #define PHY_ID_FMT "%x:%02x"
  78
  79 /* The Bus class for PHYs.  Devices which provide access to
  80  * PHYs should register using this structure */
  81 struct mii_bus {
  82         const char *name;
  83         int id;
  84         void *priv;
  85         int (*read)(struct mii_bus *bus, int phy_id, int regnum);
  86         int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
  87         int (*reset)(struct mii_bus *bus);
  88
  89         /* A lock to ensure that only one thing can read/write
  90          * the MDIO bus at a time */
  91         spinlock_t mdio_lock;
  92
  93         struct device *dev;
  94
  95         /* list of all PHYs on bus */
  96         struct phy_device *phy_map[PHY_MAX_ADDR];
  97
  98         /* Phy addresses to be ignored when probing */
  99         u32 phy_mask;
 100
 101         /* Pointer to an array of interrupts, each PHY's
 102          * interrupt at the index matching its address */
 103         int *irq;
 104 };
 105
 106 #define PHY_INTERRUPT_DISABLED  0x0
 107 #define PHY_INTERRUPT_ENABLED   0x80000000
 108
 109 /* PHY state machine states:
 110  *
 111  * DOWN: PHY device and driver are not ready for anything.  probe
 112  * should be called if and only if the PHY is in this state,
 113  * given that the PHY device exists.
 114  * - PHY driver probe function will, depending on the PHY, set
 115  * the state to STARTING or READY
 116  *
 117  * STARTING:  PHY device is coming up, and the ethernet driver is
 118  * not ready.  PHY drivers may set this in the probe function.
 119  * If they do, they are responsible for making sure the state is
 120  * eventually set to indicate whether the PHY is UP or READY,
 121  * depending on the state when the PHY is done starting up.
 122  * - PHY driver will set the state to READY
 123  * - start will set the state to PENDING
 124  *
 125  * READY: PHY is ready to send and receive packets, but the
 126  * controller is not.  By default, PHYs which do not implement
 127  * probe will be set to this state by phy_probe().  If the PHY
 128  * driver knows the PHY is ready, and the PHY state is STARTING,
 129  * then it sets this STATE.
 130  * - start will set the state to UP
 131  *
 132  * PENDING: PHY device is coming up, but the ethernet driver is
 133  * ready.  phy_start will set this state if the PHY state is
 134  * STARTING.
 135  * - PHY driver will set the state to UP when the PHY is ready
 136  *
 137  * UP: The PHY and attached device are ready to do work.
 138  * Interrupts should be started here.
 139  * - timer moves to AN
 140  *
 141  * AN: The PHY is currently negotiating the link state.  Link is
 142  * therefore down for now.  phy_timer will set this state when it
 143  * detects the state is UP.  config_aneg will set this state
 144  * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
 145  * - If autonegotiation finishes, but there's no link, it sets
 146  *   the state to NOLINK.
 147  * - If aneg finishes with link, it sets the state to RUNNING,
 148  *   and calls adjust_link
 149  * - If autonegotiation did not finish after an arbitrary amount
 150  *   of time, autonegotiation should be tried again if the PHY
 151  *   supports "magic" autonegotiation (back to AN)
 152  * - If it didn't finish, and no magic_aneg, move to FORCING.
 153  *
 154  * NOLINK: PHY is up, but not currently plugged in.
 155  * - If the timer notes that the link comes back, we move to RUNNING
 156  * - config_aneg moves to AN
 157  * - phy_stop moves to HALTED
 158  *
 159  * FORCING: PHY is being configured with forced settings
 160  * - if link is up, move to RUNNING
 161  * - If link is down, we drop to the next highest setting, and
 162  *   retry (FORCING) after a timeout
 163  * - phy_stop moves to HALTED
 164  *
 165  * RUNNING: PHY is currently up, running, and possibly sending
 166  * and/or receiving packets
 167  * - timer will set CHANGELINK if we're polling (this ensures the
 168  *   link state is polled every other cycle of this state machine,
 169  *   which makes it every other second)
 170  * - irq will set CHANGELINK
 171  * - config_aneg will set AN
 172  * - phy_stop moves to HALTED
 173  *
 174  * CHANGELINK: PHY experienced a change in link state
 175  * - timer moves to RUNNING if link
 176  * - timer moves to NOLINK if the link is down
 177  * - phy_stop moves to HALTED
 178  *
 179  * HALTED: PHY is up, but no polling or interrupts are done. Or
 180  * PHY is in an error state.
 181  *
 182  * - phy_start moves to RESUMING
 183  *
 184  * RESUMING: PHY was halted, but now wants to run again.
 185  * - If we are forcing, or aneg is done, timer moves to RUNNING
 186  * - If aneg is not done, timer moves to AN
 187  * - phy_stop moves to HALTED
 188  */
 189 enum phy_state {
 190         PHY_DOWN=0,
 191         PHY_STARTING,
 192         PHY_READY,
 193         PHY_PENDING,
 194         PHY_UP,
 195         PHY_AN,
 196         PHY_RUNNING,
 197         PHY_NOLINK,
 198         PHY_FORCING,
 199         PHY_CHANGELINK,
 200         PHY_HALTED,
 201         PHY_RESUMING
 202 };
 203
 204 /* phy_device: An instance of a PHY
 205  *
 206  * drv: Pointer to the driver for this PHY instance
 207  * bus: Pointer to the bus this PHY is on
 208  * dev: driver model device structure for this PHY
 209  * phy_id: UID for this device found during discovery
 210  * state: state of the PHY for management purposes
 211  * dev_flags: Device-specific flags used by the PHY driver.
 212  * addr: Bus address of PHY
 213  * link_timeout: The number of timer firings to wait before the
 214  * giving up on the current attempt at acquiring a link
 215  * irq: IRQ number of the PHY's interrupt (-1 if none)
 216  * phy_timer: The timer for handling the state machine
 217  * phy_queue: A work_queue for the interrupt
 218  * attached_dev: The attached enet driver's device instance ptr
 219  * adjust_link: Callback for the enet controller to respond to
 220  * changes in the link state.
 221  * adjust_state: Callback for the enet driver to respond to
 222  * changes in the state machine.
 223  *
 224  * speed, duplex, pause, supported, advertising, and
 225  * autoneg are used like in mii_if_info
 226  *
 227  * interrupts currently only supports enabled or disabled,
 228  * but could be changed in the future to support enabling
 229  * and disabling specific interrupts
 230  *
 231  * Contains some infrastructure for polling and interrupt
 232  * handling, as well as handling shifts in PHY hardware state
 233  */
 234 struct phy_device {
 235         /* Information about the PHY type */
 236         /* And management functions */
 237         struct phy_driver *drv;
 238
 239         struct mii_bus *bus;
 240
 241         struct device dev;
 242
 243         u32 phy_id;
 244
 245         enum phy_state state;
 246
 247         u32 dev_flags;
 248
 249         phy_interface_t interface;
 250
 251         /* Bus address of the PHY (0-32) */
 252         int addr;
 253
 254         /* forced speed & duplex (no autoneg)
 255          * partner speed & duplex & pause (autoneg)
 256          */
 257         int speed;
 258         int duplex;
 259         int pause;
 260         int asym_pause;
 261
 262         /* The most recently read link state */
 263         int link;
 264
 265         /* Enabled Interrupts */
 266         u32 interrupts;
 267
 268         /* Union of PHY and Attached devices' supported modes */
 269         /* See mii.h for more info */
 270         u32 supported;
 271         u32 advertising;
 272
 273         int autoneg;
 274
 275         int link_timeout;
 276
 277         /* Interrupt number for this PHY
 278          * -1 means no interrupt */
 279         int irq;
 280
 281         /* private data pointer */
 282         /* For use by PHYs to maintain extra state */
 283         void *priv;
 284
 285         /* Interrupt and Polling infrastructure */
 286         struct work_struct phy_queue;
 287         struct timer_list phy_timer;
 288         atomic_t irq_disable;
 289
 290         spinlock_t lock;
 291
 292         struct net_device *attached_dev;
 293
 294         void (*adjust_link)(struct net_device *dev);
 295
 296         void (*adjust_state)(struct net_device *dev);
 297 };
 298 #define to_phy_device(d) container_of(d, struct phy_device, dev)
 299
 300 /* struct phy_driver: Driver structure for a particular PHY type
 301  *
 302  * phy_id: The result of reading the UID registers of this PHY
 303  *   type, and ANDing them with the phy_id_mask.  This driver
 304  *   only works for PHYs with IDs which match this field
 305  * name: The friendly name of this PHY type
 306  * phy_id_mask: Defines the important bits of the phy_id
 307  * features: A list of features (speed, duplex, etc) supported
 308  *   by this PHY
 309  * flags: A bitfield defining certain other features this PHY
 310  *   supports (like interrupts)
 311  *
 312  * The drivers must implement config_aneg and read_status.  All
 313  * other functions are optional. Note that none of these
 314  * functions should be called from interrupt time.  The goal is
 315  * for the bus read/write functions to be able to block when the
 316  * bus transaction is happening, and be freed up by an interrupt
 317  * (The MPC85xx has this ability, though it is not currently
 318  * supported in the driver).
 319  */
 320 struct phy_driver {
 321         u32 phy_id;
 322         char *name;
 323         unsigned int phy_id_mask;
 324         u32 features;
 325         u32 flags;
 326
 327         /* Called to initialize the PHY,
 328          * including after a reset */
 329         int (*config_init)(struct phy_device *phydev);
 330
 331         /* Called during discovery.  Used to set
 332          * up device-specific structures, if any */
 333         int (*probe)(struct phy_device *phydev);
 334
 335         /* PHY Power Management */
 336         int (*suspend)(struct phy_device *phydev);
 337         int (*resume)(struct phy_device *phydev);
 338
 339         /* Configures the advertisement and resets
 340          * autonegotiation if phydev->autoneg is on,
 341          * forces the speed to the current settings in phydev
 342          * if phydev->autoneg is off */
 343         int (*config_aneg)(struct phy_device *phydev);
 344
 345         /* Determines the negotiated speed and duplex */
 346         int (*read_status)(struct phy_device *phydev);
 347
 348         /* Clears any pending interrupts */
 349         int (*ack_interrupt)(struct phy_device *phydev);
 350
 351         /* Enables or disables interrupts */
 352         int (*config_intr)(struct phy_device *phydev);
 353
 354         /* Clears up any memory if needed */
 355         void (*remove)(struct phy_device *phydev);
 356
 357         struct device_driver driver;
 358 };
 359 #define to_phy_driver(d) container_of(d, struct phy_driver, driver)
 360
 361 int phy_read(struct phy_device *phydev, u16 regnum);
 362 int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
 363 struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
 364 int phy_clear_interrupt(struct phy_device *phydev);
 365 int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
 366 struct phy_device * phy_attach(struct net_device *dev,
 367                 const char *phy_id, u32 flags, phy_interface_t interface);
 368 struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
 369                 void (*handler)(struct net_device *), u32 flags,
 370                 phy_interface_t interface);
 371 void phy_disconnect(struct phy_device *phydev);
 372 void phy_detach(struct phy_device *phydev);
 373 void phy_start(struct phy_device *phydev);
 374 void phy_stop(struct phy_device *phydev);
 375 int phy_start_aneg(struct phy_device *phydev);
 376
 377 int mdiobus_register(struct mii_bus *bus);
 378 void mdiobus_unregister(struct mii_bus *bus);
 379 void phy_sanitize_settings(struct phy_device *phydev);
 380 int phy_stop_interrupts(struct phy_device *phydev);
 381
 382 static inline int phy_read_status(struct phy_device *phydev) {
 383         return phydev->drv->read_status(phydev);
 384 }
 385
 386 int genphy_config_advert(struct phy_device *phydev);
 387 int genphy_setup_forced(struct phy_device *phydev);
 388 int genphy_restart_aneg(struct phy_device *phydev);
 389 int genphy_config_aneg(struct phy_device *phydev);
 390 int genphy_update_link(struct phy_device *phydev);
 391 int genphy_read_status(struct phy_device *phydev);
 392 void phy_driver_unregister(struct phy_driver *drv);
 393 int phy_driver_register(struct phy_driver *new_driver);
 394 void phy_prepare_link(struct phy_device *phydev,
 395                 void (*adjust_link)(struct net_device *));
 396 void phy_start_machine(struct phy_device *phydev,
 397                 void (*handler)(struct net_device *));
 398 void phy_stop_machine(struct phy_device *phydev);
 399 int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
 400 int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
 401 int phy_mii_ioctl(struct phy_device *phydev,
 402                 struct mii_ioctl_data *mii_data, int cmd);
 403 int phy_start_interrupts(struct phy_device *phydev);
 404 void phy_print_status(struct phy_device *phydev);
 405 struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
 406 void phy_device_free(struct phy_device *phydev);
 407
 408 extern struct bus_type mdio_bus_type;
 409 #endif /* __PHY_H */