Makefile.in

   1 ### @configure_input@
   2
   3 # Copyright (C) 1992-2014 Free Software Foundation, Inc.
   4
   5 # This file is part of GNU Emacs.
   6
   7 # GNU Emacs is free software: you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation, either version 3 of the License, or
  10 # (at your option) any later version.
  11
  12 # GNU Emacs is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16
  17 # You should have received a copy of the GNU General Public License
  18 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 ### Commentary:
  21
  22 # make all      to compile and build Emacs.
  23 # make install  to install it.
  24 # make TAGS     to update tags tables.
  25 #
  26 # make clean  or  make mostlyclean
  27 #      Delete all files from the current directory that are normally
  28 #      created by building the program.  Don't delete the files that
  29 #      record the configuration.  Also preserve files that could be made
  30 #      by building, but normally aren't because the distribution comes
  31 #      with them.
  32 #
  33 #      Delete `.dvi' files here if they are not part of the distribution.
  34 #
  35 # make distclean
  36 #      Delete all files from the current directory that are created by
  37 #      configuring or building the program.  If you have unpacked the
  38 #      source and built the program without creating any other files,
  39 #      `make distclean' should leave only the files that were in the
  40 #      distribution.
  41 #
  42 # make maintainer-clean
  43 #      Delete everything from the current directory that can be
  44 #      reconstructed with this Makefile.  This typically includes
  45 #      everything deleted by distclean, plus more: .elc files,
  46 #      C source files produced by Bison, tags tables, info files,
  47 #      and so on.
  48 #
  49 # make extraclean
  50 #      Still more severe - delete backup and autosave files, too.
  51 #      Also generated files that do not normally change and can be slow
  52 #      to rebuild (eg leim/ja-dic).
  53 #
  54 # make bootstrap
  55 #      Removes all the compiled files to force a new bootstrap from a
  56 #      clean slate, and then build in the normal way.
  57 #
  58 # make docs
  59 #      Make Emacs documentation files from their sources; requires makeinfo.
  60
  61 SHELL = @SHELL@
  62
  63 # This only matters when inheriting a CDPATH not starting with the
  64 # current directory.
  65 CDPATH=
  66
  67 # If Make doesn't predefine MAKE, set it here.
  68 @SET_MAKE@
  69
  70 # ==================== Things `configure' Might Edit ====================
  71
  72 cache_file = @cache_file@
  73 CONFIGURE_FLAGS = --cache-file=$(cache_file)
  74
  75 AUTOCONF = @AUTOCONF@
  76 AUTOMAKE = @AUTOMAKE@
  77 AUTOHEADER = @AUTOHEADER@
  78 ACLOCAL = @ACLOCAL@
  79 AWK = @AWK@
  80
  81 EXEEXT=@EXEEXT@
  82
  83 ### These help us choose version- and architecture-specific directories
  84 ### to install files in.
  85
  86 ### This should be the number of the Emacs version we're building,
  87 ### like `18.59' or `19.0'.
  88 version=@version@
  89
  90 ### This should be the name of the configuration we're building Emacs
  91 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  92 configuration=@configuration@
  93
  94 ### The nt/ subdirectory gets built only for MinGW
  95 NTDIR=@NTDIR@
  96
  97 # ==================== Where To Install Things ====================
  98
  99 # Location to install Emacs.app under GNUstep / Mac OS X.
 100 # Later values may use these.
 101 ns_appbindir=@ns_appbindir@
 102 ns_appresdir=@ns_appresdir@
 103 # Either yes or no depending on whether this is a relocatable Emacs.app.
 104 ns_self_contained=@ns_self_contained@
 105
 106 # The default location for installation.  Everything is placed in
 107 # subdirectories of this directory.  The default values for many of
 108 # the variables below are expressed in terms of this one, so you may
 109 # not need to change them.  This defaults to /usr/local.
 110 prefix=@prefix@
 111
 112 # Like `prefix', but used for architecture-specific files.
 113 exec_prefix=@exec_prefix@
 114
 115 # Where to install Emacs and other binaries that people will want to
 116 # run directly (like etags).
 117 bindir=@bindir@
 118
 119 # The root of the directory tree for read-only architecture-independent
 120 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 121 datarootdir=@datarootdir@
 122
 123 # Where to install architecture-independent data files.  ${lispdir}
 124 # and ${etcdir} are subdirectories of this.
 125 datadir=@datadir@
 126
 127 # Where to install and expect the files that Emacs modifies as it
 128 # runs.  These files are all architecture-independent.
 129 # Right now, this is not used.
 130 sharedstatedir=@sharedstatedir@
 131
 132 # Where to install and expect executable files to be run by Emacs
 133 # rather than directly by users (and other architecture-dependent
 134 # data, although Emacs does not have any).  The executables
 135 # are actually installed in ${archlibdir}, which is (normally)
 136 # a subdirectory of this.
 137 libexecdir=@libexecdir@
 138
 139 # Where to install Emacs's man pages.
 140 # Note they contain cross-references that expect them to be in section 1.
 141 mandir=@mandir@
 142 man1dir=$(mandir)/man1
 143
 144 # Where to install and expect the info files describing Emacs.
 145 infodir=@infodir@
 146 # Info files not in the doc/misc directory (we get those via make echo-info).
 147 INFO_NONMISC=emacs.info eintr.info elisp.info
 148
 149 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 150 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 151
 152 # Directory for local state files for all programs.
 153 localstatedir=@localstatedir@
 154
 155 # Where to look for bitmap files.
 156 bitmapdir=@bitmapdir@
 157
 158 # Where to find the source code.  The source code for Emacs's C kernel is
 159 # expected to be in ${srcdir}/src, and the source code for Emacs's
 160 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 161 # set by the configure script's `--srcdir' option.
 162
 163 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 164 srcdir=@srcdir@
 165 abs_srcdir=@abs_srcdir@
 166
 167 # Where the manpage source files are kept.
 168 mansrcdir=$(srcdir)/doc/man
 169
 170 # Tell make where to find source files; this is needed for the makefiles.
 171 VPATH=@srcdir@
 172
 173 # Where to find the application default.
 174 x_default_search_path=@x_default_search_path@
 175
 176 # Where the etc/emacs.desktop file is to be installed.
 177 desktopdir=$(datarootdir)/applications
 178
 179 # Where the etc/emacs.appdata.xml file is to be installed.
 180 appdatadir=$(datarootdir)/appdata
 181
 182 # Where the etc/images/icons/hicolor directory is to be installed.
 183 icondir=$(datarootdir)/icons
 184
 185 # The source directory for the icon files.
 186 iconsrcdir=$(srcdir)/etc/images/icons
 187
 188 # ==================== Emacs-specific directories ====================
 189
 190 # These variables hold the values Emacs will actually use.  They are
 191 # based on the values of the standard Make variables above.
 192
 193 # Where to install the lisp files distributed with Emacs.
 194 # This includes the Emacs version, so that the lisp files for different
 195 # versions of Emacs will install themselves in separate directories.
 196 lispdir=@lispdir@
 197
 198 # Directories Emacs should search for standard lisp files.
 199 # The default is ${lispdir}.
 200 standardlisppath=@standardlisppath@
 201
 202 # Directories Emacs should search for lisp files specific to this
 203 # site (i.e. customizations), before consulting ${standardlisppath}.
 204 # This should be a colon-separated list of directories.
 205 locallisppath=@locallisppath@
 206
 207 # Where Emacs will search to find its lisp files.  Before
 208 # changing this, check to see if your purpose wouldn't
 209 # better be served by changing locallisppath.  This
 210 # should be a colon-separated list of directories.
 211 # The default is ${locallisppath}:${standardlisppath}.
 212 lisppath=@lisppath@
 213
 214 # Where Emacs will search for its lisp files while building.
 215 # This is only used during the process of compiling Emacs,
 216 # to help Emacs find its lisp files before they've been installed
 217 # in their final location.
 218 # This should be a colon-separated list of directories.
 219 # Normally it points to the lisp/ directory in the sources.
 220 # NB lread.c relies on lisp/ being first here.
 221 buildlisppath=${abs_srcdir}/lisp
 222
 223 # Where to install the other architecture-independent
 224 # data files distributed with Emacs (like the tutorial,
 225 # the cookie recipes and the Zippy database). This path
 226 # usually contains the Emacs version number, so the data
 227 # files for multiple versions of Emacs may be installed
 228 # at once.
 229 etcdir=@etcdir@
 230
 231 # Where to put executables to be run by Emacs rather than
 232 # the user.  This path usually includes the Emacs version
 233 # and configuration name, so that multiple configurations
 234 # for multiple versions of Emacs may be installed at
 235 # once.
 236 archlibdir=@archlibdir@
 237
 238 # Where to put the etc/DOC file.
 239 etcdocdir=@etcdocdir@
 240
 241 # Where to install Emacs game score files.
 242 gamedir=@gamedir@
 243
 244 # ==================== Utility Programs for the Build ====================
 245
 246 # Allow the user to specify the install program.
 247 # Note that if the system does not provide a suitable install,
 248 # configure will use build-aux/install-sh.  Annoyingly, it does
 249 # not use an absolute path.  So we must take care to always run
 250 # INSTALL-type commands from the directory containing the Makefile.
 251 # This explains (I think) the cd thisdir seen in several install rules.
 252 INSTALL = @INSTALL@
 253 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 254 INSTALL_DATA = @INSTALL_DATA@
 255 INSTALL_INFO = @INSTALL_INFO@
 256 # By default, we uphold the dignity of our programs.
 257 INSTALL_STRIP =
 258 MKDIR_P = @MKDIR_P@
 259 # Create a link to a file in the same directory as the target.
 260 LN_S_FILEONLY = @LN_S_FILEONLY@
 261
 262 # We use gzip to compress installed .el files.
 263 GZIP_PROG = @GZIP_PROG@
 264
 265 # ============================= Targets ==============================
 266
 267 # Program name transformation.
 268 TRANSFORM = @program_transform_name@
 269
 270 # What emacs should be called when installed.
 271 EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
 272 EMACS = ${EMACS_NAME}${EXEEXT}
 273 EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
 274
 275 # Subdirectories to make recursively.
 276 SUBDIR = $(NTDIR) lib lib-src src lisp
 277
 278 # The subdir makefiles created by config.status.
 279 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
 280 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
 281
 282 # Subdirectories to install, and where they'll go.  lib-src's and nt's
 283 # makefiles know how to install them, so we don't do that here.
 284 # Directories that cannot simply be copied, eg info, are treated
 285 # separately.
 286 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 287 COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}"
 288
 289 all: ${SUBDIR} info
 290
 291 .PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 etc-emacsver
 292
 293 # If configure were to just generate emacsver.tex from emacsver.tex.in
 294 # in the normal way, the timestamp of emacsver.tex would always be
 295 # newer than that of the pdf files, which are prebuilt in release tarfiles.
 296 # So we use this rule, and move-if-change, to avoid that.
 297 etc-emacsver:
 298         majorversion=`echo ${version} | sed 's/\..*//'`; \
 299         sed "s/[@]majorversion@/$${majorversion}/" \
 300           ${srcdir}/etc/refcards/emacsver.tex.in > emacsver.tex.$$$$ && \
 301           ${srcdir}/build-aux/move-if-change emacsver.tex.$$$$ \
 302           ${srcdir}/etc/refcards/emacsver.tex
 303
 304 removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
 305
 306 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 307 # See comments in configure.ac for why it is done this way, as opposed
 308 # to just letting configure generate epaths.h from epaths.in in a
 309 # similar way to how Makefile is made from Makefile.in.
 310 epaths-force:
 311         @for dir in '$(abs_srcdir)' '$(lispdir)' '$(archlibdir)'; do \
 312           case $$dir in \
 313             *:*) \
 314               echo >&2 "Build or installation directory '$$dir'"; \
 315               echo >&2 "cannot contain ':'."; \
 316               exit 1;; \
 317           esac; \
 318         done
 319         @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
 320           locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
 321           buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
 322           x_default_search_path=`echo ${x_default_search_path}`; \
 323           gamedir=`echo ${gamedir}`; \
 324           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 325           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
 326           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 327           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 328           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 329           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 330           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 331           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 332           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 333           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 334           -e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') &&             \
 335         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 336
 337 # The w32 build needs a slightly different editing, and it uses
 338 # nt/epaths.nt as the template.
 339 #
 340 # Use the value of ${locallisppath} supplied by `configure',
 341 # to support the --enable-locallisppath argument.
 342 #
 343 # In this case, the paths written to 'src/epaths.h' must be in native
 344 # MS-Windows format (e.g. 'c:/foo/bar'), because temacs is a MinGW
 345 # program that doesn't support MSYS-style paths (e.g. '/c/foo/bar' or
 346 # '/foo/bar').
 347 epaths-force-w32:
 348         @(w32srcdir=`${srcdir}/build-aux/msys-to-w32 "${abs_srcdir}"`; \
 349           w32prefix=`${srcdir}/build-aux/msys-to-w32 "${prefix}"`; \
 350           w32locallisppath=`${srcdir}/build-aux/msys-to-w32 "${locallisppath}"` ; \
 351           w32locallisppath=$${w32locallisppath//$${w32prefix}/"%emacs_dir%"} ; \
 352           sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$          \
 353           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${w32locallisppath//;/\\;}"'";' \
 354           -e '/^.*#/s/@VER@/${version}/g'                       \
 355           -e '/^.*#/s/@CFG@/${configuration}/g'                 \
 356           -e "/^.*#/s|@SRC@|$${w32srcdir}|g") &&                \
 357         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 358
 359 # If lib/Makefile would build files in '.', then build them before
 360 # building 'lib', to avoid races with parallel makes.
 361 lib: am--refresh
 362
 363 lib-src src: $(NTDIR) lib
 364
 365 src: lib-src
 366
 367 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'.
 368 lisp: src
 369
 370 # These targets should be "${SUBDIR} without `src'".
 371 lib lib-src lisp nt: Makefile
 372         $(MAKE) -C $@ all
 373
 374 # Note the use of single quotes in the value of vcswitness.
 375 # This passes an unexpanded $srcdir to src's Makefile, which then
 376 # expands it using its own value of srcdir (which points to the
 377 # source directory of src/).
 378 src: Makefile
 379         dirstate='.bzr/checkout/dirstate';                              \
 380         vcswitness='$$(srcdir)/../'$$dirstate;                          \
 381         [ -r "$(srcdir)/$$dirstate" ] || vcswitness='';                 \
 382         $(MAKE) -C $@ all VCSWITNESS="$$vcswitness"
 383
 384 blessmail: Makefile src
 385         $(MAKE) -C lib-src maybe-blessmail
 386
 387 # We used to have one rule per */Makefile.in, but that leads to race
 388 # conditions with parallel makes, so let's assume that the time stamp on
 389 # ./Makefile is representative of the time stamp on all the other Makefiles.
 390 #
 391 # config.status overrides MAKEFILE_NAME with a bogus name when creating
 392 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
 393 # config.status and overwrite config.status while executing it (Bug#11214).
 394 #
 395 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
 396 # then attempts to build that file.  This forces 'Makefile', 'lib/Makefile',
 397 # etc. to be built without running into similar recursion problems.
 398 MAKEFILE_NAME = Makefile
 399 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
 400           $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
 401         MAKE='$(MAKE)' ./config.status
 402
 403 # Don't erase these files if make is interrupted while refreshing them.
 404 .PRECIOUS: Makefile config.status
 405
 406 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 407         if [ -x ./config.status ]; then \
 408             $(CFG) ./config.status --recheck;   \
 409         else                            \
 410             $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
 411         fi
 412
 413 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
 414
 415 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 416         cd ${srcdir} && ${AUTOCONF}
 417
 418 ACLOCAL_PATH = @ACLOCAL_PATH@
 419 ACLOCAL_INPUTS = $(srcdir)/configure.ac $(srcdir)/m4/*.m4
 420 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
 421         cd $(srcdir) && ACLOCAL_PATH='$(ACLOCAL_PATH)' $(ACLOCAL) -I m4
 422
 423 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
 424   $(srcdir)/lib/gnulib.mk
 425 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
 426         cd $(srcdir) && $(AUTOMAKE) --gnu -a -c lib/Makefile
 427
 428 # Regenerate files that this makefile would have made, if this makefile
 429 # had been built by Automake.  The name 'am--refresh' is for
 430 # compatibility with subsidiary Automake-generated makefiles.
 431 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
 432 .PHONY: am--refresh
 433
 434 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 435         @ # Usually, there's no need to rebuild src/config.in just
 436         @ # because stamp-h.in has changed (since building stamp-h.in
 437         @ # refreshes config.in as well), but if config.in is missing
 438         @ # then we really need to do something more.
 439         [ -r "$@" ] || ( cd ${srcdir} && ${AUTOHEADER} )
 440 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 441         cd ${srcdir} && ${AUTOHEADER}
 442         rm -f $(srcdir)/src/stamp-h.in
 443         echo timestamp > $(srcdir)/src/stamp-h.in
 444
 445 # ==================== Installation ====================
 446
 447 .PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info
 448 .PHONY: install-man install-etc install-strip install-$(NTDIR)
 449 .PHONY: uninstall uninstall-$(NTDIR)
 450
 451 ## If we let lib-src do its own installation, that means we
 452 ## don't have to duplicate the list of utilities to install in
 453 ## this Makefile as well.
 454
 455 install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail
 456         @true
 457
 458 ## Ensure that $subdir contains a subdirs.el file.
 459 ## Here and elsewhere, we set the umask so that any created files are
 460 ## world-readable.
 461 ## TODO it might be good to warn about non-standard permissions of
 462 ## pre-existing directories, but that does not seem easy.
 463 write_subdir=if [ -f "$${subdir}/subdirs.el" ]; \
 464         then true; \
 465         else \
 466           umask 022; \
 467           ${MKDIR_P} "$${subdir}"; \
 468           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 469            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 470             > "$${subdir}/subdirs.el"; \
 471         fi
 472
 473 ### Install the executables that were compiled specifically for this machine.
 474 ### We do install-arch-indep first because the executable needs the
 475 ### Lisp files and DOC file to work properly.
 476 install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
 477         umask 022; ${MKDIR_P} "$(DESTDIR)${bindir}"
 478         $(MAKE) -C lib-src install
 479         if test "${ns_self_contained}" = "no"; then \
 480           ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} "$(DESTDIR)${bindir}/$(EMACSFULL)" || exit 1 ; \
 481           chmod 1755 "$(DESTDIR)${bindir}/$(EMACSFULL)" || true; \
 482           if test "x${NO_BIN_LINK}" = x; then \
 483             rm -f "$(DESTDIR)${bindir}/$(EMACS)" ; \
 484             cd "$(DESTDIR)${bindir}" && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
 485           fi; \
 486         else \
 487           subdir=${ns_appresdir}/site-lisp; \
 488           ${write_subdir} || exit 1; \
 489           rm -rf ${ns_appresdir}/share; \
 490         fi
 491
 492 ### Windows-specific install target for installing programs produced
 493 ### in nt/, and its Posix do-nothing shadow.
 494 install-:
 495 install-nt:
 496         $(MAKE) -C $(NTDIR) install
 497
 498 ## In the share directory, we are deleting:
 499 ## applications (with emacs.desktop, also found in etc/)
 500 ## emacs (basically empty except for unneeded site-lisp directories)
 501 ## icons (duplicates etc/images/icons/hicolor)
 502
 503 ## This is install-etc for everything except self-contained-ns builds.
 504 ## For them, it is empty.
 505 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
 506
 507 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 508 ## Needs to be the user running install, so configure can't set it.
 509 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 510           `id -un 2> /dev/null`; do \
 511           [ -n "$${installuser}" ] && break ; \
 512         done
 513
 514 ### Install the files that are machine-independent.
 515 ### Most of them come straight from the distribution; the exception is
 516 ### the DOC file, which is copied from the build directory.
 517
 518 ## We delete each directory in ${COPYDESTS} before we copy into it;
 519 ## that way, we can reinstall over directories that have been put in
 520 ## place with their files read-only (perhaps because they are checked
 521 ## into RCS).  In order to make this safe, we make sure that the
 522 ## source exists and is distinct from the destination.
 523
 524 ## We delete etc/DOC* because there may be irrelevant DOC files from
 525 ## other builds in the source directory.  This is ok because we just
 526 ## deleted the entire installed etc/ directory and recreated it.
 527 ## install-etcdoc installs the relevant DOC.
 528
 529 ## Note that we install etc/refcards/*.ps if present.
 530 ## TODO we should compress these if GZIP_PROG is set.
 531 ## It would be simpler to have a separate install rule for etc/refcards
 532 ## (maybe move it to doc/refcards?).
 533
 534 ## Note that the Makefiles in the etc directory are potentially useful
 535 ## in an installed Emacs, so should not be excluded.
 536
 537 ## We always create the _default_ locallisppath directories, and
 538 ## ensure that they contain a subdirs.el file (via write_subdir).
 539 ## This is true even if locallisppath has a non-default value.
 540 ## In case of non-default value, we used to create the specified directories,
 541 ## but not add subdirs.el to them.  This was a strange halfway house.
 542 ## Nowadays we do not create non-default directories.
 543
 544 ## Note that we use tar instead of plain old cp -R/-r because the latter
 545 ## is apparently not portable (even in 2012!).
 546 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
 547 ## I have no idea which platforms Emacs supports where cp -R does not
 548 ## work correctly, and therefore no idea when tar can be replaced.
 549 ## See also these comments from 2004 about cp -r working fine:
 550 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
 551 install-arch-indep: lisp install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
 552         -set ${COPYDESTS} ; \
 553         unset CDPATH; \
 554         $(set_installuser); \
 555         for dir in ${COPYDIR} ; do \
 556           [ -d $${dir} ] || exit 1 ; \
 557           dest="$$1" ; shift ; \
 558           if [ -d "$${dest}" ]; then \
 559             exp_dest=`cd "$${dest}" && /bin/pwd`; \
 560             [ "$$exp_dest" = "`cd $${dir} && /bin/pwd`" ] && continue ; \
 561           else true; \
 562           fi; \
 563           rm -rf "$${dest}" ; \
 564           umask 022; ${MKDIR_P} "$${dest}" ; \
 565           echo "Copying $${dir} to $${dest}..." ; \
 566           (cd $${dir}; tar -chf - . ) \
 567             | (cd "$${dest}"; umask 022; \
 568                tar -xvf - && cat > /dev/null) || exit 1; \
 569           if [ "$${dir}" = "${srcdir}/etc" ]; then \
 570               rm -f "$${dest}/DOC"* ; \
 571               rm -f "$${dest}/refcards"/*.aux "$${dest}/refcards"/*.dvi; \
 572               rm -f "$${dest}/refcards"/*.log; \
 573           else true; \
 574           fi; \
 575           (cd "$${dest}" || exit 1; \
 576             for subdir in `find . -type d -print` ; do \
 577               chmod a+rx $${subdir} ; \
 578               rm -f $${subdir}/.gitignore ; \
 579               rm -f $${subdir}/.arch-inventory ; \
 580               rm -f $${subdir}/.DS_Store ; \
 581               rm -f $${subdir}/\#* ; \
 582               rm -f $${subdir}/.\#* ; \
 583               rm -f $${subdir}/*~ ; \
 584               rm -f $${subdir}/*.orig ; \
 585               rm -f $${subdir}/ChangeLog* ; \
 586               [ "$${dir}" != "${srcdir}/etc" ] && \
 587                 rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
 588             done ); \
 589           find "$${dest}" -exec chown $${installuser} {} ';' ;\
 590         done
 591         -rm -f "$(DESTDIR)${lispdir}/subdirs.el"
 592         umask 022; $(srcdir)/build-aux/update-subdirs "$(DESTDIR)${lispdir}"
 593         subdir="$(DESTDIR)${datadir}/emacs/${version}/site-lisp" ; \
 594           ${write_subdir}
 595         subdir="$(DESTDIR)${datadir}/emacs/site-lisp" ; \
 596           ${write_subdir} || true
 597         [ -z "${GZIP_PROG}" ] || { \
 598           echo "Compressing *.el ..." && \
 599           cd "$(DESTDIR)${lispdir}" && \
 600           for f in `find . -name "*.elc" -print | sed 's/.elc$$/.el/'`; do \
 601             ${GZIP_PROG} -9n "$$f"; \
 602           done; \
 603         }
 604         -chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS}
 605
 606 ## The above chmods are needed because "umask 022; tar ..." is not
 607 ## guaranteed to do the right thing; eg if we are root and tar is
 608 ## preserving source permissions.
 609
 610 ## Note that install-arch-indep deletes and recreates the entire
 611 ## installed etc/ directory, so we need it to run before this does.
 612 install-etcdoc: src install-arch-indep
 613         -unset CDPATH; \
 614         umask 022; ${MKDIR_P} "$(DESTDIR)${etcdocdir}" ; \
 615         exp_etcdocdir=`cd "$(DESTDIR)${etcdocdir}"; /bin/pwd`; \
 616         if [ "`cd ./etc; /bin/pwd`" != "$$exp_etcdocdir" ]; \
 617         then \
 618            docfile="DOC"; \
 619            echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
 620            ${INSTALL_DATA} etc/$${docfile} "$(DESTDIR)${etcdocdir}/$${docfile}"; \
 621            $(set_installuser); \
 622              chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \
 623         else true; fi
 624
 625 ## FIXME:
 626 ## If info/dir is missing, but we have install-info, we should let
 627 ## that handle it.  If info/dir is present and we do not have install-info,
 628 ## we should check for missing entries and add them by hand.
 629 ##
 630 ## FIXME:
 631 ## If HAVE_MAKEINFO = no and there are no info files, do not install info/dir.
 632 install-info: info
 633         umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}"
 634         -unset CDPATH; \
 635         thisdir=`/bin/pwd`; \
 636         exp_infodir=`cd "$(DESTDIR)${infodir}" && /bin/pwd`; \
 637         if [ "`cd ${srcdir}/info && /bin/pwd`" = "$$exp_infodir" ]; then \
 638           true; \
 639         else \
 640            [ -f "$(DESTDIR)${infodir}/dir" ] || \
 641               [ ! -f ${srcdir}/info/dir ] || \
 642               ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir"; \
 643            info_misc=`$(MAKE) --no-print-directory -s -C doc/misc echo-info`; \
 644            cd ${srcdir}/info ; \
 645            for elt in ${INFO_NONMISC} $${info_misc}; do \
 646               test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 647               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 648                (cd "$${thisdir}"; \
 649                 ${INSTALL_DATA} ${srcdir}/info/$$f "$(DESTDIR)${infodir}/$$f"); \
 650                 [ -n "${GZIP_PROG}" ] || continue ; \
 651                 rm -f "$(DESTDIR)${infodir}/$$f.gz"; \
 652                 ${GZIP_PROG} -9n "$(DESTDIR)${infodir}/$$f"; \
 653               done; \
 654              (cd "$${thisdir}"; \
 655               ${INSTALL_INFO} --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
 656            done; \
 657         fi
 658
 659 ## "gzip || true" is because some gzips exit with non-zero status
 660 ## if compression would not reduce the file size.  Eg, the gzip in
 661 ## OpenBSD 4.9 seems to do this (2013/03).  In Emacs, this can
 662 ## only happen with the tiny ctags.1 manpage.  We don't really care if
 663 ## ctags.1 is compressed or not.  "gzip -f" is another option here,
 664 ## but not sure if portable.
 665 install-man:
 666         umask 022; ${MKDIR_P} "$(DESTDIR)${man1dir}"
 667         thisdir=`/bin/pwd`; \
 668         cd ${mansrcdir}; \
 669         for page in *.1; do \
 670           dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
 671           (cd "$${thisdir}"; \
 672            ${INSTALL_DATA} ${mansrcdir}/$${page} "$(DESTDIR)${man1dir}/$${dest}"); \
 673           [ -n "${GZIP_PROG}" ] || continue ; \
 674           rm -f "$(DESTDIR)${man1dir}/$${dest}.gz"; \
 675           ${GZIP_PROG} -9n "$(DESTDIR)${man1dir}/$${dest}" || true; \
 676         done
 677
 678 ## Install those items from etc/ that need to end up elsewhere.
 679
 680 ## If you prefer, choose "emacs22" at installation time.
 681 ## Note: emacs22 does not have all the resolutions.
 682 EMACS_ICON=emacs
 683
 684 install-etc:
 685         umask 022; ${MKDIR_P} "$(DESTDIR)${desktopdir}"
 686         tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
 687         emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
 688         sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
 689           -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
 690           ${srcdir}/etc/emacs.desktop > $${tmp}; \
 691         ${INSTALL_DATA} $${tmp} "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"; \
 692         rm -f $${tmp}
 693         umask 022; ${MKDIR_P} "$(DESTDIR)${appdatadir}"
 694         tmp=etc/emacs.tmpappdata; rm -f $${tmp}; \
 695         sed -e "s/emacs\.desktop/${EMACS_NAME}.desktop/" \
 696           ${srcdir}/etc/emacs.appdata.xml > $${tmp}; \
 697         ${INSTALL_DATA} $${tmp} "$(DESTDIR)${appdatadir}/${EMACS_NAME}.appdata.xml"; \
 698         rm -f $${tmp}
 699         thisdir=`/bin/pwd`; \
 700         cd ${iconsrcdir} || exit 1; umask 022 ; \
 701         for dir in */*/apps */*/mimetypes; do \
 702           [ -d $${dir} ] || continue ; \
 703           ( cd "$${thisdir}"; ${MKDIR_P} "$(DESTDIR)${icondir}/$${dir}" ) ; \
 704           for icon in $${dir}/${EMACS_ICON}[.-]*; do \
 705             [ -r $${icon} ] || continue ; \
 706             ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
 707             dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
 708             ( cd "$${thisdir}"; \
 709               ${INSTALL_DATA} ${iconsrcdir}/$${icon} "$(DESTDIR)${icondir}/$${dir}/$${dest}" ) \
 710             || exit 1; \
 711           done ; \
 712         done
 713
 714 ### Build Emacs and install it, stripping binaries while installing them.
 715 install-strip:
 716         $(MAKE) INSTALL_STRIP=-s install
 717
 718 ### Delete all the installed files that the `install' target would
 719 ### create (but not the noninstalled files such as `make all' would create).
 720 ###
 721 ### Don't delete the lisp and etc directories if they're in the source tree.
 722 uninstall: uninstall-$(NTDIR) uninstall-doc
 723         $(MAKE) -C lib-src uninstall
 724         -unset CDPATH; \
 725         for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${etcdir}" ; do    \
 726           if [ -d "$${dir}" ]; then                     \
 727             case `cd "$${dir}" ; /bin/pwd` in           \
 728               "`cd ${srcdir} ; /bin/pwd`"* ) ;;         \
 729               * ) rm -rf "$${dir}" ;;                   \
 730             esac ;                                      \
 731             case "$${dir}" in                           \
 732               "$(DESTDIR)${datadir}/emacs/${version}"/* )               \
 733                 rm -rf "$(DESTDIR)${datadir}/emacs/${version}"  \
 734               ;;                                        \
 735             esac ;                                      \
 736           fi ;                                          \
 737         done
 738         -rm -rf "$(DESTDIR)${libexecdir}/emacs/${version}"
 739         thisdir=`/bin/pwd`; \
 740         (info_misc=`$(MAKE) --no-print-directory -s -C doc/misc echo-info`; \
 741          if cd "$(DESTDIR)${infodir}"; then \
 742            for elt in ${INFO_NONMISC} $${info_misc}; do \
 743              (cd "$${thisdir}"; \
 744               $(INSTALL_INFO) --remove --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
 745              if [ -n "${GZIP_PROG}" ]; then \
 746                 ext=.gz; else ext=; fi; \
 747              rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
 748            done; \
 749          fi)
 750         (if [ -n "${GZIP_PROG}" ]; then \
 751             ext=.gz; else ext=; fi; \
 752          if cd ${mansrcdir}; then \
 753            for page in *.1; do \
 754              rm -f "$(DESTDIR)${man1dir}"/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
 755          fi)
 756         (cd "$(DESTDIR)${bindir}" && rm -f $(EMACSFULL) $(EMACS) || true)
 757         (if cd "$(DESTDIR)${icondir}"; then \
 758            rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
 759              hicolor/scalable/apps/${EMACS_NAME}.svg \
 760              hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
 761         fi)
 762         -rm -f "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"
 763         -rm -f "$(DESTDIR)${appdatadir}/${EMACS_NAME}.appdata.xml"
 764         for file in snake-scores tetris-scores; do \
 765           file="$(DESTDIR)${gamedir}/$${file}"; \
 766           [ -s "$${file}" ] || rm -f "$$file"; \
 767         done
 768
 769 ### Windows-specific uninstall target for removing programs produced
 770 ### in nt/, and its Posix do-nothing shadow.
 771 uninstall-:
 772 uninstall-nt:
 773         $(MAKE) -C $(NTDIR) uninstall
 774
 775 # ==================== Cleaning up and miscellanea ====================
 776
 777 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
 778
 779 ## Eg:
 780 ## src_clean:
 781 ##     make -C src clean
 782 define submake_template
 783 .PHONY: $(1)_$(2)
 784 $(1)_$(2):
 785         $$(MAKE) -C $(1) $(2)
 786 endef
 787
 788 ### `mostlyclean'
 789 ###      Like `clean', but may refrain from deleting a few files that people
 790 ###      normally don't want to recompile.  For example, the `mostlyclean'
 791 ###      target for GCC does not delete `libgcc.a', because recompiling it
 792 ###      is rarely necessary and takes a lot of time.
 793 mostlyclean_dirs = src oldXMenu lwlib lib lib-src nt doc/emacs doc/misc \
 794   doc/lispref doc/lispintro
 795
 796 $(foreach dir,$(mostlyclean_dirs),$(eval $(call submake_template,$(dir),mostlyclean)))
 797
 798 mostlyclean: $(mostlyclean_dirs:=_mostlyclean)
 799         for dir in test/automated; do \
 800           [ ! -d $$dir ] || $(MAKE) -C $$dir mostlyclean; \
 801         done
 802
 803 ### `clean'
 804 ###      Delete all files from the current directory that are normally
 805 ###      created by building the program.  Don't delete the files that
 806 ###      record the configuration.  Also preserve files that could be made
 807 ###      by building, but normally aren't because the distribution comes
 808 ###      with them.
 809 ###
 810 ###      Delete `.dvi' files here if they are not part of the distribution.
 811 clean_dirs = $(mostlyclean_dirs) nextstep
 812
 813 $(foreach dir,$(clean_dirs),$(eval $(call submake_template,$(dir),clean)))
 814
 815 clean: $(clean_dirs:=_clean)
 816         for dir in test/automated; do \
 817           [ ! -d $$dir ] || $(MAKE) -C $$dir clean; \
 818         done
 819         -rm -f etc/emacs.tmpdesktop etc/emacs.tmpappdata
 820         -rm -rf info-dir.*
 821
 822 ### `bootclean'
 823 ###      Delete all files that need to be remade for a clean bootstrap.
 824 top_bootclean=\
 825         rm -f config.cache config.log
 826
 827 ### `distclean'
 828 ###      Delete all files from the current directory that are created by
 829 ###      configuring or building the program.  If you have unpacked the
 830 ###      source and built the program without creating any other files,
 831 ###      `make distclean' should leave only the files that were in the
 832 ###      distribution.
 833 top_distclean=\
 834         ${top_bootclean}; \
 835         rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
 836
 837 distclean_dirs = $(clean_dirs) leim lisp
 838
 839 $(foreach dir,$(distclean_dirs),$(eval $(call submake_template,$(dir),distclean)))
 840
 841 distclean: $(distclean_dirs:=_distclean)
 842         for dir in test/automated admin/grammars admin/unidata; do \
 843           [ ! -d $$dir ] || $(MAKE) -C $$dir distclean; \
 844         done
 845         ${top_distclean}
 846
 847 ### `bootstrap-clean'
 848 ###      Delete everything that can be reconstructed by `make' and that
 849 ###      needs to be deleted in order to force a bootstrap from a clean state.
 850 $(foreach dir,$(distclean_dirs),$(eval $(call submake_template,$(dir),bootstrap-clean)))
 851
 852 bootstrap-clean: $(distclean_dirs:=_bootstrap-clean)
 853         for dir in test/automated admin/grammars admin/unidata; do \
 854           [ ! -d $$dir ] || $(MAKE) -C $$dir bootstrap-clean; \
 855         done
 856         [ ! -f config.log ] || mv -f config.log config.log~
 857         rm -rf ${srcdir}/info
 858         rm -f ${srcdir}/etc/refcards/emacsver.tex
 859         ${top_bootclean}
 860
 861 ### `maintainer-clean'
 862 ###      Delete everything from the current directory that can be
 863 ###      reconstructed with this Makefile.  This typically includes
 864 ###      everything deleted by distclean, plus more: C source files
 865 ###      produced by Bison, tags tables, info files, and so on.
 866 ###
 867 ###      One exception, however: `make maintainer-clean' should not delete
 868 ###      `configure' even if `configure' can be remade using a rule in the
 869 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 870 ###      anything that needs to exist in order to run `configure' and then
 871 ###      begin to build the program.
 872 top_maintainer_clean=\
 873         ${top_distclean}; \
 874         rm -fr autom4te.cache
 875
 876 maintainer_clean_dirs = src leim lisp
 877
 878 $(foreach dir,$(maintainer_clean_dirs),$(eval $(call submake_template,$(dir),maintainer-clean)))
 879
 880 maintainer-clean: bootstrap-clean $(maintainer_clean_dirs:=_maintainer-clean)
 881         for dir in test/automated admin/grammars admin/unidata; do \
 882           [ ! -d $$dir ] || $(MAKE) -C $$dir maintainer-clean; \
 883         done
 884         ${top_maintainer_clean}
 885
 886 ### This doesn't actually appear in the coding standards, but Karl
 887 ### says GCC supports it, and that's where the configuration part of
 888 ### the coding standards seem to come from.  It's like distclean, but
 889 ### it deletes backup and autosave files too.
 890 ### Note that we abuse this in some subdirectories (eg leim),
 891 ### to delete some generated files that are slow to rebuild.
 892 $(foreach dir,$(SUBDIR),$(eval $(call submake_template,$(dir),extraclean)))
 893
 894 ## FIXME this is busted because most of these do not have extraclean rules.
 895 extraclean: $(SUBDIR:=_extraclean)
 896         ${top_maintainer_clean}
 897         -rm -f config-tmp-*
 898         -rm -f *~ \#*
 899
 900 # The src subdir knows how to do the right thing
 901 # even when the build directory and source dir are different.
 902 .PHONY: TAGS tags
 903 TAGS tags: lib lib-src src
 904         $(MAKE) -C src tags
 905
 906 check: all
 907         @if test ! -d test/automated; then \
 908           echo "You do not seem to have the test/ directory."; \
 909           echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
 910         else \
 911           $(MAKE) -C test/automated check; \
 912         fi
 913
 914 dist:
 915         cd ${srcdir}; ./make-dist
 916
 917 DVIS  = lispref-dvi  lispintro-dvi  emacs-dvi  misc-dvi
 918 HTMLS = lispref-html lispintro-html emacs-html misc-html
 919 INFOS = lispref-info lispintro-info emacs-info misc-info
 920 PDFS  = lispref-pdf  lispintro-pdf  emacs-pdf  misc-pdf
 921 PSS   = lispref-ps   lispintro-ps   emacs-ps   misc-ps
 922
 923 DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
 924 $(DOCS):
 925         t=$@; IFS=-; set $$t; IFS=; $(MAKE) -C doc/$$1 $$2
 926
 927 .PHONY: $(DOCS) docs pdf ps
 928 .PHONY: info dvi dist check html info-real info-dir check-info
 929
 930 ## TODO add etc/refcards.
 931 docs: $(DOCS)
 932 dvi: $(DVIS)
 933 html: $(HTMLS)
 934 info-real: $(INFOS)
 935 pdf: $(PDFS)
 936 ps: $(PSS)
 937
 938 info-dir: ${srcdir}/info/dir
 939
 940 ## Hopefully doc/misc/*.texi is not too long for some systems?
 941 srcdir_doc_info_dir_inputs = \
 942   ${srcdir}/doc/emacs/emacs.texi \
 943   ${srcdir}/doc/lispintro/emacs-lisp-intro.texi \
 944   ${srcdir}/doc/lispref/elisp.texi \
 945   $(sort $(wildcard ${srcdir}/doc/misc/*.texi))
 946 info_dir_inputs = \
 947   ../build-aux/dir_top \
 948   $(subst ${srcdir}/doc/,,${srcdir_doc_info_dir_inputs})
 949 info_dir_deps = \
 950   ${srcdir}/build-aux/make-info-dir \
 951   ${srcdir}/build-aux/dir_top \
 952   ${srcdir_doc_info_dir_inputs}
 953
 954 ## It would be much simpler if info/dir was only created in the
 955 ## installation location by the install-info rule, but we also
 956 ## need one in the source directory for people running uninstalled.
 957 ## FIXME it would be faster to use the install-info program if we have it,
 958 ## but then we would need to depend on info-real, which would
 959 ## slow down parallelization.
 960 ${srcdir}/info/dir: ${info_dir_deps}
 961         ${MKDIR_P} ${srcdir}/info
 962         tempfile=info-dir.$$$$; \
 963         rm -f $${tempfile}; \
 964         (cd ${srcdir}/doc && \
 965          AWK='${AWK}' ../build-aux/make-info-dir ${info_dir_inputs} \
 966         ) >$$tempfile && \
 967         ${srcdir}/build-aux/move-if-change $${tempfile} ${srcdir}/info/dir
 968
 969 INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
 970         install-lispintro-dvi install-misc-dvi
 971 INSTALL_HTML = install-emacs-html install-lispref-html \
 972         install-lispintro-html install-misc-html
 973 INSTALL_PDF = install-emacs-pdf install-lispref-pdf \
 974         install-lispintro-pdf install-misc-pdf
 975 INSTALL_PS = install-emacs-ps install-lispref-ps \
 976         install-lispintro-ps install-misc-ps
 977 INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS)
 978
 979 ## Install non .info forms of the documentation.
 980 ## TODO add etc/refcards.
 981 $(INSTALL_DOC):
 982         t=$@; IFS=-; set $$t; IFS=; $(MAKE) -C doc/$$2 $$1-$$3
 983
 984 .PHONY: $(INSTALL_DOC) install-doc
 985 .PHONY: install-dvi install-html install-pdf install-ps
 986
 987 install-doc: $(INSTALL_DOC)
 988 install-dvi: $(INSTALL_DVI)
 989 install-html: $(INSTALL_HTML)
 990 install-pdf: $(INSTALL_PDF)
 991 install-ps: $(INSTALL_PS)
 992
 993
 994 UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \
 995         uninstall-lispintro-dvi uninstall-misc-dvi
 996 UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \
 997         uninstall-lispintro-html uninstall-misc-html
 998 UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \
 999         uninstall-lispintro-pdf uninstall-misc-pdf
1000 UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \
1001         uninstall-lispintro-ps uninstall-misc-ps
1002 UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
1003
1004 $(UNINSTALL_DOC):
1005         t=$@; IFS=-; set $$t; IFS=; $(MAKE) -C doc/$$2 $$1-$$3
1006
1007 .PHONY: $(UNINSTALL_DOC) uninstall-doc
1008 .PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
1009
1010 uninstall-doc: $(UNINSTALL_DOC)
1011 uninstall-dvi: $(UNINSTALL_DVI)
1012 uninstall-html: $(UNINSTALL_HTML)
1013 uninstall-pdf: $(UNINSTALL_PDF)
1014 uninstall-ps: $(UNINSTALL_PS)
1015
1016
1017 # Note that man/Makefile knows how to put the info files in $(srcdir),
1018 # so we can do ok running make in the build dir.
1019 # This used to have a clause that exited with an error if MAKEINFO = no.
1020 # But it is inappropriate to do so without checking if makeinfo is
1021 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
1022 # Only the doc/*/Makefiles can decide that, so we let those rules run
1023 # and give a standard error if makeinfo is needed but missing.
1024 # While it would be nice to give a more detailed error message, that
1025 # would require changing every rule in doc/ that builds an info file,
1026 # and it's not worth it.  This case is only relevant if you download a
1027 # release, then change the .texi files.
1028 info:
1029         @if test "$(HAVE_MAKEINFO)" = "no"; then \
1030           echo "Configured --without-makeinfo, not building manuals" ; \
1031         else \
1032           $(MAKE) info-real info-dir; \
1033         fi
1034
1035 ## build-aux/make-info-dir expects only certain dircategories.
1036 check-info: info
1037         cd info ; \
1038         bad= ; \
1039         for file in *; do \
1040           test -f "$${file}" || continue ; \
1041           case $${file} in \
1042             *-[0-9]*|COPYING|dir) continue ;; \
1043           esac ; \
1044           cat=`sed -n 's/^INFO-DIR-SECTION //p' $${file}`; \
1045           case $${cat} in \
1046            "Texinfo documentation system" | "Emacs"| "Emacs lisp" | \
1047            "Emacs editing modes" | "Emacs network features" | \
1048            "Emacs misc features" | "Emacs lisp libraries" ) : ;; \
1049            *)  bad="$${bad} $${file}" ;; \
1050           esac; \
1051         done ; \
1052         if test -n "$${bad}"; then \
1053           echo "Unexpected dircategory in: $${bad}" ; \
1054           exit 1 ; \
1055         fi ; \
1056         echo "info files are OK"
1057
1058 #### Bootstrapping.
1059
1060 ### This first cleans the lisp subdirectory, removing all compiled
1061 ### Lisp files.  Then re-run make to build all the files anew.
1062
1063 .PHONY: bootstrap
1064
1065 # Bootstrapping does the following:
1066 #  * Remove files to start from a bootstrap-clean slate.
1067 #  * Run autogen.sh.
1068 #  * Rebuild Makefile, to update the build procedure itself.
1069 #  * Do the actual build.
1070 bootstrap: bootstrap-clean
1071         cd $(srcdir) && ./autogen.sh
1072         $(MAKE) MAKEFILE_NAME=force-Makefile force-Makefile
1073         $(MAKE) all
1074
1075 .PHONY: check-declare
1076
1077 check-declare:
1078         @if [ ! -f $(srcdir)/src/emacs ]; then \
1079           echo "You must build Emacs to use this command"; \
1080           exit 1; \
1081         fi
1082         $(MAKE) -C lisp $@