Makefile.in

   1 ### @configure_input@
   2
   3 # Copyright (C) 1992-2013 Free Software Foundation, Inc.
   4
   5 # This file is part of GNU Emacs.
   6
   7 # GNU Emacs is free software: you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation, either version 3 of the License, or
  10 # (at your option) any later version.
  11
  12 # GNU Emacs is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16
  17 # You should have received a copy of the GNU General Public License
  18 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 ### Commentary:
  21
  22 # make all      to compile and build Emacs.
  23 # make install  to install it.
  24 # make TAGS     to update tags tables.
  25 #
  26 # make clean  or  make mostlyclean
  27 #      Delete all files from the current directory that are normally
  28 #      created by building the program.  Don't delete the files that
  29 #      record the configuration.  Also preserve files that could be made
  30 #      by building, but normally aren't because the distribution comes
  31 #      with them.
  32 #
  33 #      Delete `.dvi' files here if they are not part of the distribution.
  34 #
  35 # make distclean
  36 #      Delete all files from the current directory that are created by
  37 #      configuring or building the program.  If you have unpacked the
  38 #      source and built the program without creating any other files,
  39 #      `make distclean' should leave only the files that were in the
  40 #      distribution.
  41 #
  42 # make maintainer-clean
  43 #      Delete everything from the current directory that can be
  44 #      reconstructed with this Makefile.  This typically includes
  45 #      everything deleted by distclean, plus more: .elc files,
  46 #      C source files produced by Bison, tags tables, info files,
  47 #      and so on.
  48 #
  49 # make extraclean
  50 #      Still more severe - delete backup and autosave files, too.
  51 #
  52 # make bootstrap
  53 #      Removes all the compiled files to force a new bootstrap from a
  54 #      clean slate, and then build in the normal way.
  55 #
  56 # make docs
  57 #      Make Emacs documentation files from their sources; requires makeinfo.
  58
  59 SHELL = /bin/sh
  60
  61 # This may not work with certain non-GNU make's.  It only matters when
  62 # inheriting a CDPATH not starting with the current directory.
  63 CDPATH=
  64
  65 # If Make doesn't predefine MAKE, set it here.
  66 @SET_MAKE@
  67
  68 # Prevent submakes from outputting "Entering directory ..." and
  69 # "Leaving directory..." diagnostics that would mess up 'make echo-info'.
  70 QUIET_SUBMAKE = MAKELEVEL=0
  71
  72 # ==================== Things `configure' Might Edit ====================
  73
  74 cache_file = @cache_file@
  75 CONFIGURE_FLAGS = --cache-file=$(cache_file)
  76
  77 CC=@CC@
  78 CFLAGS=@CFLAGS@
  79 LDFLAGS=@LDFLAGS@
  80 CPPFLAGS=@CPPFLAGS@
  81 EXEEXT=@EXEEXT@
  82
  83 ### These help us choose version- and architecture-specific directories
  84 ### to install files in.
  85
  86 ### This should be the number of the Emacs version we're building,
  87 ### like `18.59' or `19.0'.
  88 version=@version@
  89
  90 ### This should be the name of the configuration we're building Emacs
  91 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  92 configuration=@configuration@
  93
  94 ### The nt/ subdirectory gets built only for MinGW
  95 NTDIR=@NTDIR@
  96
  97 # ==================== Where To Install Things ====================
  98
  99 # Location to install Emacs.app under GNUstep / Mac OS X.
 100 # Later values may use these.
 101 ns_appbindir=@ns_appbindir@
 102 ns_appresdir=@ns_appresdir@
 103 # Either yes or no depending on whether this is a relocatable Emacs.app.
 104 ns_self_contained=@ns_self_contained@
 105
 106 # The default location for installation.  Everything is placed in
 107 # subdirectories of this directory.  The default values for many of
 108 # the variables below are expressed in terms of this one, so you may
 109 # not need to change them.  This defaults to /usr/local.
 110 prefix=@prefix@
 111
 112 # Like `prefix', but used for architecture-specific files.
 113 exec_prefix=@exec_prefix@
 114
 115 # Where to install Emacs and other binaries that people will want to
 116 # run directly (like etags).
 117 bindir=@bindir@
 118
 119 # The root of the directory tree for read-only architecture-independent
 120 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 121 datarootdir=@datarootdir@
 122
 123 # Where to install architecture-independent data files.  ${lispdir}
 124 # and ${etcdir} are subdirectories of this.
 125 datadir=@datadir@
 126
 127 # Where to install and expect the files that Emacs modifies as it
 128 # runs.  These files are all architecture-independent.
 129 # Right now, this is not used.
 130 sharedstatedir=@sharedstatedir@
 131
 132 # Where to install and expect executable files to be run by Emacs
 133 # rather than directly by users (and other architecture-dependent
 134 # data, although Emacs does not have any).  The executables
 135 # are actually installed in ${archlibdir}, which is (normally)
 136 # a subdirectory of this.
 137 libexecdir=@libexecdir@
 138
 139 # Where to install Emacs's man pages.
 140 # Note they contain cross-references that expect them to be in section 1.
 141 mandir=@mandir@
 142 man1dir=$(mandir)/man1
 143
 144 # Where to install and expect the info files describing Emacs.
 145 infodir=@infodir@
 146 # Info files not in the doc/misc directory (we get those via make echo-info).
 147 INFO_EXT=@INFO_EXT@
 148 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
 149
 150 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 151 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 152
 153 # Directory for local state files for all programs.
 154 localstatedir=@localstatedir@
 155
 156 # Where to look for bitmap files.
 157 bitmapdir=@bitmapdir@
 158
 159 # Where to find the source code.  The source code for Emacs's C kernel is
 160 # expected to be in ${srcdir}/src, and the source code for Emacs's
 161 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 162 # set by the configure script's `--srcdir' option.
 163
 164 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 165 srcdir=@srcdir@
 166
 167 # Where the manpage source files are kept.
 168 mansrcdir=$(srcdir)/doc/man
 169
 170 # Tell make where to find source files; this is needed for the makefiles.
 171 VPATH=@srcdir@
 172
 173 # Where to find the application default.
 174 x_default_search_path=@x_default_search_path@
 175
 176 # Where the etc/emacs.desktop file is to be installed.
 177 desktopdir=$(datarootdir)/applications
 178
 179 # Where the etc/images/icons/hicolor directory is to be installed.
 180 icondir=$(datarootdir)/icons
 181
 182 # The source directory for the icon files.
 183 iconsrcdir=$(srcdir)/etc/images/icons
 184
 185 # ==================== Emacs-specific directories ====================
 186
 187 # These variables hold the values Emacs will actually use.  They are
 188 # based on the values of the standard Make variables above.
 189
 190 # Where to install the lisp, leim files distributed with
 191 # Emacs.  This includes the Emacs version, so that the
 192 # lisp files for different versions of Emacs will install
 193 # themselves in separate directories.
 194 lispdir=@lispdir@
 195 leimdir=@leimdir@
 196
 197 # Directories Emacs should search for standard lisp files.
 198 # The default is ${lispdir}:${leimdir}.
 199 standardlisppath=@standardlisppath@
 200
 201 # Directories Emacs should search for lisp files specific to this
 202 # site (i.e. customizations), before consulting ${standardlisppath}.
 203 # This should be a colon-separated list of directories.
 204 locallisppath=@locallisppath@
 205
 206 # Where Emacs will search to find its lisp files.  Before
 207 # changing this, check to see if your purpose wouldn't
 208 # better be served by changing locallisppath.  This
 209 # should be a colon-separated list of directories.
 210 # The default is ${locallisppath}:${standardlisppath}.
 211 lisppath=@lisppath@
 212
 213 # Where Emacs will search for its lisp files while
 214 # building.  This is only used during the process of
 215 # compiling Emacs, to help Emacs find its lisp files
 216 # before they've been installed in their final location.
 217 # This should be a colon-separated list of directories.
 218 # Normally it points to the lisp/ directory in the sources.
 219 buildlisppath=${srcdir}/lisp
 220
 221 # Where to install the other architecture-independent
 222 # data files distributed with Emacs (like the tutorial,
 223 # the cookie recipes and the Zippy database). This path
 224 # usually contains the Emacs version number, so the data
 225 # files for multiple versions of Emacs may be installed
 226 # at once.
 227 etcdir=@etcdir@
 228
 229 # Where to put executables to be run by Emacs rather than
 230 # the user.  This path usually includes the Emacs version
 231 # and configuration name, so that multiple configurations
 232 # for multiple versions of Emacs may be installed at
 233 # once.
 234 archlibdir=@archlibdir@
 235
 236 # Where to put the docstring file.
 237 docdir=@docdir@
 238
 239 # Where to install Emacs game score files.
 240 gamedir=@gamedir@
 241
 242 # ==================== Utility Programs for the Build ====================
 243
 244 # Allow the user to specify the install program.
 245 # Note that if the system does not provide a suitable install,
 246 # configure will use build-aux/install-sh.  Annoyingly, it does
 247 # not use an absolute path.  So we must take care to always run
 248 # INSTALL-type commands from the directory containing the Makefile.
 249 # This explains (I think) the cd thisdir seen in several install rules.
 250 INSTALL = @INSTALL@
 251 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 252 INSTALL_DATA = @INSTALL_DATA@
 253 INSTALL_INFO = @INSTALL_INFO@
 254 # By default, we uphold the dignity of our programs.
 255 INSTALL_STRIP =
 256 MKDIR_P = @MKDIR_P@
 257 # Create a link to a file in the same directory as the target.
 258 LN_S_FILEONLY = @LN_S_FILEONLY@
 259
 260 # We use gzip to compress installed .el files.
 261 GZIP_PROG = @GZIP_PROG@
 262 # If non-nil, gzip the installed Info and man pages.
 263 GZIP_INFO = @GZIP_INFO@
 264
 265 # ============================= Targets ==============================
 266
 267 # Program name transformation.
 268 TRANSFORM = @program_transform_name@
 269
 270 # What emacs should be called when installed.
 271 EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
 272 EMACS = ${EMACS_NAME}${EXEEXT}
 273 EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
 274
 275 # Subdirectories to make recursively.
 276 SUBDIR = $(NTDIR) lib lib-src src lisp leim
 277
 278 # The subdir makefiles created by config.status.
 279 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
 280 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
 281
 282 # Subdirectories to install, and where they'll go.  lib-src's and nt's
 283 # makefiles know how to install them, so we don't do that here.
 284 # Directories that cannot simply be copied, eg info, are treated
 285 # separately.  quail appears twice because in out-of-tree builds, it
 286 # exists twice.
 287 COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
 288 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
 289
 290 all: ${SUBDIR}
 291
 292 .PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
 293
 294 removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
 295
 296 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 297 # See comments in configure.ac for why it is done this way, as opposed
 298 # to just letting configure generate epaths.h from epaths.in in a
 299 # similar way to how Makefile is made from Makefile.in.
 300 epaths-force: FRC
 301         @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
 302           locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
 303           buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
 304           x_default_search_path=`echo ${x_default_search_path}`; \
 305           gamedir=`echo ${gamedir}`; \
 306           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 307           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
 308           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 309           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 310           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 311           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 312           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 313           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 314           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 315           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 316           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') &&                \
 317         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 318
 319 # Convert MSYS-style /x/foo or Windows-style x:\foo file names
 320 # into x:/foo that Windows can grok.
 321 msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
 322
 323 # Transform directory search path and its components.  Original can
 324 # be MSYS or Windows style.  Set path separator to ";", directory
 325 # separator to "/" and transform MSYS-style "/c/" to "c:/".
 326 # Remove empty path components and escape semicolons.
 327 msys_lisppath_to_w32=sed -e 's,\\\\,/,g'                        \
 328         -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g'               \
 329         -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g'     \
 330         -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
 331
 332 # Replace "${prefix}" with '%emacs_dir%' (which expands to install
 333 # directory at runtime).
 334 msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
 335
 336 # Quote Sed special characters (except backslash and newline) with
 337 # a double backslash.
 338 msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
 339
 340 # The w32 build needs a slightly different editing, and it uses
 341 # nt/epaths.nt as the template.
 342 # Use the value of ${locallisppath} supplied by `configure',
 343 # to support the --enable-locallisppath argument.
 344 epaths-force-w32: FRC
 345         @(w32srcdir=`echo "${srcdir}" | ${msys_to_w32}` ;       \
 346           prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
 347           locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
 348           sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$          \
 349           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 350           -e '/^.*#/s/@VER@/${version}/g'                       \
 351           -e '/^.*#/s/@CFG@/${configuration}/g'                 \
 352           -e "/^.*#/s|@SRC@|$${w32srcdir}|g") &&                \
 353         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 354
 355 lib-src src: $(NTDIR) lib
 356
 357 src:    lib-src FRC
 358
 359 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
 360 # and `leim'.
 361 lisp leim: src
 362
 363 # These targets should be "${SUBDIR} without `src'".
 364 lib lib-src lisp leim nt: Makefile FRC
 365         cd $@ && $(MAKE) all $(MFLAGS)                         \
 366           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 367           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 368
 369 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 370 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 371 # constructed yet) or the empty string (otherwise).
 372 # src/Makefile.in uses it to implement conditional dependencies, so that
 373 # files that need bootstrap-emacs to be built do not additionally need
 374 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 375 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 376 # all preloaded elisp files, and only then dump the actual src/emacs, which
 377 # is not wrong, but is overkill in 99.99% of the cases.
 378 src: Makefile FRC
 379         boot=bootstrap-emacs$(EXEEXT);                         \
 380         if [ ! -x "src/$$boot" ]; then                                     \
 381             cd $@; $(MAKE) all $(MFLAGS)                                   \
 382               CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'         \
 383               LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
 384         fi;
 385         if [ -r .bzr/checkout/dirstate ]; then                  \
 386             vcswitness="`pwd`/.bzr/checkout/dirstate";  \
 387         fi;                                                     \
 388         cd $@; $(MAKE) all $(MFLAGS)                           \
 389           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 390           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
 391           VCSWITNESS="$$vcswitness"
 392
 393 blessmail: Makefile src FRC
 394         cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
 395           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 396
 397 # We used to have one rule per */Makefile.in, but that leads to race
 398 # conditions with parallel makes, so let's assume that the time stamp on
 399 # ./Makefile is representative of the time stamp on all the other Makefiles.
 400 #
 401 # config.status overrides MAKEFILE_NAME with a bogus name when creating
 402 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
 403 # config.status and overwrite config.status while executing it (Bug#11214).
 404 #
 405 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
 406 # then attempts to build that file.  This forces 'Makefile', 'lib/Makefile',
 407 # etc. to be built without running into similar recursion problems.
 408 MAKEFILE_NAME = Makefile
 409 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
 410           $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
 411         MAKE='$(MAKE)' ./config.status
 412
 413 # Don't erase these files if make is interrupted while refreshing them.
 414 .PRECIOUS: Makefile config.status
 415
 416 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 417         if [ -x ./config.status ]; then \
 418             $(CFG) ./config.status --recheck;   \
 419         else                            \
 420             $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
 421         fi
 422
 423 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
 424
 425 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 426         cd ${srcdir} && autoconf
 427
 428 ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
 429 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
 430         cd $(srcdir) && aclocal -I m4
 431
 432 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
 433   $(srcdir)/lib/gnulib.mk
 434 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
 435         cd $(srcdir) && automake --gnu -a -c lib/Makefile
 436
 437 # Regenerate files that this makefile would have made, if this makefile
 438 # had been built by Automake.  The name 'am--refresh' is for
 439 # compatibility with subsidiary Automake-generated makefiles.
 440 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
 441 .PHONY: am--refresh
 442
 443 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 444         @ # Usually, there's no need to rebuild src/config.in just
 445         @ # because stamp-h.in has changed (since building stamp-h.in
 446         @ # refreshes config.in as well), but if config.in is missing
 447         @ # then we really need to do something more.
 448         [ -r "$@" ] || ( cd ${srcdir} && autoheader )
 449 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 450         cd ${srcdir} && autoheader
 451         rm -f $(srcdir)/src/stamp-h.in
 452         echo timestamp > $(srcdir)/src/stamp-h.in
 453
 454 # ==================== Installation ====================
 455
 456 .PHONY: install install-arch-dep install-arch-indep install-doc install-info
 457 .PHONY: install-man install-etc install-strip install-$(NTDIR)
 458 .PHONY: uninstall uninstall-$(NTDIR)
 459
 460 ## If we let lib-src do its own installation, that means we
 461 ## don't have to duplicate the list of utilities to install in
 462 ## this Makefile as well.
 463
 464 install: all install-arch-indep install-doc install-arch-dep install-$(NTDIR) blessmail
 465         @true
 466
 467 ## Ensure that $subdir contains a subdirs.el file.
 468 ## Here and elsewhere, we set the umask so that any created files are
 469 ## world-readable.
 470 ## TODO it might be good to warn about non-standard permissions of
 471 ## pre-existing directories, but that does not seem easy.
 472 write_subdir=if [ -f $${subdir}/subdirs.el ]; \
 473         then true; \
 474         else \
 475           umask 022; \
 476           ${MKDIR_P} $${subdir}; \
 477           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 478            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 479             > $${subdir}/subdirs.el; \
 480         fi
 481
 482 ### Install the executables that were compiled specifically for this machine.
 483 ### We do install-arch-indep first because the executable needs the
 484 ### Lisp files and DOC file to work properly.
 485 install-arch-dep: src install-arch-indep install-doc install-$(NTDIR)
 486         umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
 487         cd lib-src && \
 488           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 489             exec_prefix=${exec_prefix} bindir=${bindir} \
 490             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 491             INSTALL_STRIP=${INSTALL_STRIP}
 492         if test "${ns_self_contained}" = "no"; then \
 493           ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
 494           chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \
 495           if test "x${NO_BIN_LINK}" = x; then \
 496             rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
 497             cd $(DESTDIR)${bindir} && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
 498           fi; \
 499         else \
 500           subdir=${ns_appresdir}/site-lisp; \
 501           ${write_subdir} || exit 1; \
 502           rm -rf ${ns_appresdir}/share; \
 503         fi
 504
 505 ### Windows-specific install target for installing programs produced
 506 ### in nt/, and its Posix do-nothing shadow.
 507 install-:
 508 install-nt:
 509         cd $(NTDIR) && \
 510           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 511             exec_prefix=${exec_prefix} bindir=${bindir} \
 512             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 513             INSTALL_STRIP=${INSTALL_STRIP}
 514
 515 ## In the share directory, we are deleting:
 516 ## applications (with emacs.desktop, also found in etc/)
 517 ## emacs (basically empty except for unneeded site-lisp directories)
 518 ## icons (duplicates etc/images/icons/hicolor)
 519
 520 ## This is install-etc for everything except self-contained-ns builds.
 521 ## For them, it is empty.
 522 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
 523
 524 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 525 ## Needs to be the user running install, so configure can't set it.
 526 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 527           `id -un 2> /dev/null`; do \
 528           [ -n "$${installuser}" ] && break ; \
 529         done
 530
 531 ### Install the files that are machine-independent.
 532 ### Most of them come straight from the distribution; the exception is
 533 ### the DOC file, which is copied from the build directory.
 534
 535 ## We delete each directory in ${COPYDESTS} before we copy into it;
 536 ## that way, we can reinstall over directories that have been put in
 537 ## place with their files read-only (perhaps because they are checked
 538 ## into RCS).  In order to make this safe, we make sure that the
 539 ## source exists and is distinct from the destination.
 540
 541 ## We delete etc/DOC* because there may be irrelevant DOC files from
 542 ## other builds in the source directory.  This is ok because we just
 543 ## deleted the entire installed etc/ directory and recreated it.
 544 ## install-doc installs the relevant DOC.
 545
 546 ## Note that the Makefiles in the etc directory are potentially useful
 547 ## in an installed Emacs, so should not be excluded.
 548
 549 ## We used to create locallisppath, but if it points to non-standard
 550 ## locations, is not really Emacs's job to create these directories,
 551 ## so it is no longer done.
 552
 553 ## Note that we use tar instead of plain old cp -R/-r because the latter
 554 ## is apparently not portable (even in 2012!).
 555 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
 556 ## I have no idea which platforms Emacs supports where cp -R does not
 557 ## work correctly, and therefore no idea when tar can be replaced.
 558 ## See also these comments from 2004 about cp -r working fine:
 559 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
 560 install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
 561         -set ${COPYDESTS} ; \
 562         unset CDPATH; \
 563         $(set_installuser); \
 564         for dir in ${COPYDIR} ; do \
 565           [ -d $${dir} ] || exit 1 ; \
 566           dest=$$1 ; shift ; \
 567           [ -d $${dest} ] && \
 568             [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
 569             continue ; \
 570           if [ "$${dir}" = "leim/quail" ]; then \
 571             [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
 572               continue ; \
 573           else \
 574             rm -rf $${dest} ; \
 575             umask 022; ${MKDIR_P} $${dest} ; \
 576           fi ; \
 577           echo "Copying $${dir} to $${dest}..." ; \
 578           (cd $${dir}; tar -chf - . ) \
 579             | (cd $${dest}; umask 022; \
 580                tar -xvf - && cat > /dev/null) || exit 1; \
 581           [ "$${dir}" != "${srcdir}/etc" ] || rm -f $${dest}/DOC* ; \
 582           for subdir in `find $${dest} -type d -print` ; do \
 583             chmod a+rx $${subdir} ; \
 584             rm -f $${subdir}/.gitignore ; \
 585             rm -f $${subdir}/.arch-inventory ; \
 586             rm -f $${subdir}/.DS_Store ; \
 587             rm -f $${subdir}/\#* ; \
 588             rm -f $${subdir}/.\#* ; \
 589             rm -f $${subdir}/*~ ; \
 590             rm -f $${subdir}/*.orig ; \
 591             rm -f $${subdir}/ChangeLog* ; \
 592             [ "$${dir}" != "${srcdir}/etc" ] && \
 593               rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
 594           done ; \
 595           find $${dest} -exec chown $${installuser} {} ';' ;\
 596         done
 597         -rm -f $(DESTDIR)${leimdir}/leim-list.el
 598         ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
 599         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 600         umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
 601         subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
 602           ${write_subdir}
 603         subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
 604           ${write_subdir} || true
 605         [ -z "${GZIP_PROG}" ] || \
 606           ( echo "Compressing *.el ..." ; \
 607             unset CDPATH; \
 608             thisdir=`/bin/pwd`; \
 609             for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
 610               cd $${thisdir} ; \
 611               cd $${dir} || exit 1 ; \
 612               for f in `find . -name "*.elc" -print`; do \
 613                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 614               done ; \
 615             done )
 616         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
 617
 618 ## The above chmods are needed because "umask 022; tar ..." is not
 619 ## guaranteed to do the right thing; eg if we are root and tar is
 620 ## preserving source permissions.
 621
 622 ## Note that install-arch-indep deletes and recreates the entire
 623 ## installed etc/ directory, so we need it to run before this does.
 624 install-doc: src install-arch-indep
 625         -unset CDPATH; \
 626         umask 022; ${MKDIR_P} $(DESTDIR)${docdir} ; \
 627         if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${docdir}; /bin/pwd` ]; \
 628         then \
 629            docfile="DOC"; \
 630            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 631            ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${docdir}/$${docfile}; \
 632            $(set_installuser); \
 633              chown $${installuser} $(DESTDIR)${docdir}/$${docfile} || true ; \
 634         else true; fi
 635
 636 install-info: info
 637         umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
 638         -unset CDPATH; \
 639         thisdir=`/bin/pwd`; \
 640         [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
 641           (cd $(DESTDIR)${infodir};  \
 642            [ -f dir ] || \
 643              (cd $${thisdir}; \
 644               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
 645            info_misc=`cd $${thisdir}/doc/misc && \
 646                 $(QUIET_SUBMAKE) $(MAKE) -s echo-info \
 647            `; \
 648            cd ${srcdir}/info ; \
 649            for elt in ${INFO_NONMISC} $${info_misc}; do \
 650               test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 651               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 652                (cd $${thisdir}; \
 653                 ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
 654                 ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
 655                 rm -f $(DESTDIR)${infodir}/$$f.gz; \
 656                 ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
 657               done; \
 658              (cd $${thisdir}; \
 659               ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 660            done)
 661
 662 ## "gzip || true" is because some gzips exit with non-zero status
 663 ## if compression would not reduce the file size.  Eg, the gzip in
 664 ## OpenBSD 4.9 seems to do this (2013/03).  In Emacs, this can
 665 ## only happen with the tiny ctags.1 manpage.  We don't really care if
 666 ## ctags.1 is compressed or not.  "gzip -f" is another option here,
 667 ## but not sure if portable.
 668 install-man:
 669         umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
 670         thisdir=`/bin/pwd`; \
 671         cd ${mansrcdir}; \
 672         for page in *.1; do \
 673           dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
 674           (cd $${thisdir}; \
 675            ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \
 676           ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
 677           rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \
 678           ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest} || true; \
 679         done
 680
 681 ## Install those items from etc/ that need to end up elsewhere.
 682
 683 ## If you prefer, choose "emacs22" at installation time.
 684 ## Note: emacs22 does not have all the resolutions.
 685 EMACS_ICON=emacs
 686
 687 install-etc:
 688         umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
 689         tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
 690         emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
 691         sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
 692           -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
 693           ${srcdir}/etc/emacs.desktop > $${tmp}; \
 694         ${INSTALL_DATA} $${tmp} $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop; \
 695         rm -f $${tmp}
 696         thisdir=`/bin/pwd`; \
 697         cd ${iconsrcdir} || exit 1; umask 022 ; \
 698         for dir in */*/apps */*/mimetypes; do \
 699           [ -d $${dir} ] || continue ; \
 700           ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
 701           for icon in $${dir}/${EMACS_ICON}[.-]*; do \
 702             [ -r $${icon} ] || continue ; \
 703             ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
 704             dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
 705             ( cd $${thisdir}; \
 706               ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${dir}/$${dest} ) \
 707             || exit 1; \
 708           done ; \
 709         done
 710
 711 ### Build Emacs and install it, stripping binaries while installing them.
 712 install-strip:
 713         $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
 714
 715 ### Delete all the installed files that the `install' target would
 716 ### create (but not the noninstalled files such as `make all' would create).
 717 ###
 718 ### Don't delete the lisp and etc directories if they're in the source tree.
 719 uninstall: uninstall-$(NTDIR)
 720         cd lib-src &&                                   \
 721          $(MAKE) $(MFLAGS) uninstall                    \
 722             prefix=${prefix} exec_prefix=${exec_prefix} \
 723             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
 724
 725         -unset CDPATH; \
 726         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 727           if [ -d $${dir} ]; then                       \
 728             case `cd $${dir} ; /bin/pwd` in             \
 729               `cd ${srcdir} ; /bin/pwd`* ) ;;           \
 730               * ) rm -rf $${dir} ;;                     \
 731             esac ;                                      \
 732             case $${dir} in                             \
 733               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 734                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 735               ;;                                        \
 736             esac ;                                      \
 737           fi ;                                          \
 738         done
 739         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 740         thisdir=`/bin/pwd`; \
 741         (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
 742          if cd $(DESTDIR)${infodir}; then \
 743            for elt in ${INFO_NONMISC} $${info_misc}; do \
 744              (cd $${thisdir}; \
 745               $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 746              if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 747                 ext=.gz; else ext=; fi; \
 748              rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
 749            done; \
 750          fi)
 751         (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
 752             ext=.gz; else ext=; fi; \
 753          if cd ${mansrcdir}; then \
 754            for page in *.1; do \
 755              rm -f $(DESTDIR)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
 756          fi)
 757         (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS) || true)
 758         (if cd $(DESTDIR)${icondir}; then \
 759            rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
 760              hicolor/scalable/apps/${EMACS_NAME}.svg \
 761              hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
 762         fi)
 763         -rm -f $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop
 764         for file in snake-scores tetris-scores; do \
 765           file=$(DESTDIR)${gamedir}/$${file}; \
 766           [ -s $${file} ] || rm -f $$file; \
 767         done
 768
 769 ### Windows-specific uninstall target for removing programs produced
 770 ### in nt/, and its Posix do-nothing shadow.
 771 uninstall-:
 772 uninstall-nt:
 773         cd $(NTDIR) &&                                  \
 774          $(MAKE) $(MFLAGS) uninstall                    \
 775             prefix=${prefix} exec_prefix=${exec_prefix} \
 776             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
 777
 778 FRC:
 779
 780 # ==================== Cleaning up and miscellanea ====================
 781
 782 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
 783
 784 ### `mostlyclean'
 785 ###      Like `clean', but may refrain from deleting a few files that people
 786 ###      normally don't want to recompile.  For example, the `mostlyclean'
 787 ###      target for GCC does not delete `libgcc.a', because recompiling it
 788 ###      is rarely necessary and takes a lot of time.
 789 mostlyclean: FRC
 790         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 791         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 792         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 793         (cd lib;      $(MAKE) $(MFLAGS) mostlyclean)
 794         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 795         (cd nt;       $(MAKE) $(MFLAGS) mostlyclean)
 796         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 797         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 798         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 799         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 800         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 801
 802 ### `clean'
 803 ###      Delete all files from the current directory that are normally
 804 ###      created by building the program.  Don't delete the files that
 805 ###      record the configuration.  Also preserve files that could be made
 806 ###      by building, but normally aren't because the distribution comes
 807 ###      with them.
 808 ###
 809 ###      Delete `.dvi' files here if they are not part of the distribution.
 810 clean: FRC
 811         -rm -f etc/emacs.tmpdesktop
 812         (cd src;      $(MAKE) $(MFLAGS) clean)
 813         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 814         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 815         (cd lib;      $(MAKE) $(MFLAGS) clean)
 816         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 817         (cd nt;       $(MAKE) $(MFLAGS) clean)
 818         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 819         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 820         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 821         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 822         (cd leim;     $(MAKE) $(MFLAGS) clean)
 823         (cd nextstep && $(MAKE) $(MFLAGS) clean)
 824
 825 ### `bootclean'
 826 ###      Delete all files that need to be remade for a clean bootstrap.
 827 top_bootclean=\
 828         rm -f config.cache config.log
 829 ### `distclean'
 830 ###      Delete all files from the current directory that are created by
 831 ###      configuring or building the program.  If you have unpacked the
 832 ###      source and built the program without creating any other files,
 833 ###      `make distclean' should leave only the files that were in the
 834 ###      distribution.
 835 top_distclean=\
 836         ${top_bootclean}; \
 837         rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
 838 distclean: FRC
 839         (cd src;      $(MAKE) $(MFLAGS) distclean)
 840         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 841         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 842         (cd lib;      $(MAKE) $(MFLAGS) distclean)
 843         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 844         (cd nt;       $(MAKE) $(MFLAGS) distclean)
 845         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 846         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 847         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 848         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 849         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 850         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 851         (cd nextstep && $(MAKE) $(MFLAGS) distclean)
 852         ${top_distclean}
 853
 854 ### `bootstrap-clean'
 855 ###      Delete everything that can be reconstructed by `make' and that
 856 ###      needs to be deleted in order to force a bootstrap from a clean state.
 857 bootstrap-clean: FRC
 858         (cd src;      $(MAKE) $(MFLAGS) bootstrap-clean)
 859         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 860         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 861         (cd lib;      $(MAKE) $(MFLAGS) maintainer-clean)
 862         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 863         (cd nt;       $(MAKE) $(MFLAGS) maintainer-clean)
 864         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 865         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 866         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 867         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 868         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 869         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 870         (cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean)
 871         [ ! -f config.log ] || mv -f config.log config.log~
 872         ${top_bootclean}
 873
 874 ### `maintainer-clean'
 875 ###      Delete everything from the current directory that can be
 876 ###      reconstructed with this Makefile.  This typically includes
 877 ###      everything deleted by distclean, plus more: C source files
 878 ###      produced by Bison, tags tables, info files, and so on.
 879 ###
 880 ###      One exception, however: `make maintainer-clean' should not delete
 881 ###      `configure' even if `configure' can be remade using a rule in the
 882 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 883 ###      anything that needs to exist in order to run `configure' and then
 884 ###      begin to build the program.
 885 top_maintainer_clean=\
 886         ${top_distclean}; \
 887         rm -fr autom4te.cache
 888 maintainer-clean: bootstrap-clean FRC
 889         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 890         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 891         ${top_maintainer_clean}
 892
 893 ### This doesn't actually appear in the coding standards, but Karl
 894 ### says GCC supports it, and that's where the configuration part of
 895 ### the coding standards seem to come from.  It's like distclean, but
 896 ### it deletes backup and autosave files too.
 897 extraclean:
 898         for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 899         ${top_maintainer_clean}
 900         -rm -f config-tmp-*
 901         -rm -f *~ \#*
 902
 903 # The src subdir knows how to do the right thing
 904 # even when the build directory and source dir are different.
 905 .PHONY: TAGS tags
 906 TAGS tags: lib lib-src src
 907         cd src; $(MAKE) $(MFLAGS) tags
 908
 909 check:
 910         @if test ! -d test/automated; then \
 911           echo "You do not seem to have the test/ directory."; \
 912           echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
 913         else \
 914           cd test/automated && $(MAKE) $(MFLAGS) check; \
 915         fi
 916
 917 dist:
 918         cd ${srcdir}; ./make-dist
 919
 920 DVIS  = lispref-dvi  lispintro-dvi  emacs-dvi  misc-dvi
 921 HTMLS = lispref-html lispintro-html emacs-html misc-html
 922 INFOS = lispref-info lispintro-info emacs-info misc-info
 923 PDFS  = lispref-pdf  lispintro-pdf  emacs-pdf  misc-pdf
 924 PSS   = lispref-ps   lispintro-ps   emacs-ps # no misc-ps
 925
 926 DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
 927 $(DOCS):
 928         t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
 929
 930 .PHONY: $(DOCS) docs pdf ps
 931 .PHONY: info dvi dist check html info-real force-info check-info-dir
 932
 933 docs: $(DOCS)
 934 dvi: $(DVIS)
 935 html: $(HTMLS)
 936 info-real: $(INFOS)
 937 pdf: $(PDFS)
 938 ps: $(PSS)
 939
 940 force-info:
 941 # Note that man/Makefile knows how to put the info files in $(srcdir),
 942 # so we can do ok running make in the build dir.
 943 # This used to have a clause that exited with an error if MAKEINFO = no.
 944 # But it is inappropriate to do so without checking if makeinfo is
 945 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
 946 # Only the doc/*/Makefiles can decide that, so we let those rules run
 947 # and give a standard error if makeinfo is needed but missing.
 948 # While it would be nice to give a more detailed error message, that
 949 # would require changing every rule in doc/ that builds an info file,
 950 # and it's not worth it.  This case is only relevant if you download a
 951 # release, then change the .texi files.
 952 info: force-info
 953         @if test "$(HAVE_MAKEINFO)" = "no"; then \
 954           echo "Configured --without-makeinfo, not building manuals" ; \
 955         else \
 956           $(MAKE) $(MFLAGS) info-real ; \
 957         fi
 958
 959 # The info/dir file must be updated by hand when new manuals are added.
 960 check-info-dir: info
 961         cd info ; \
 962         missing= ; \
 963         for file in *; do \
 964           test -f "$${file}" || continue ; \
 965           case $${file} in \
 966             *-[0-9]*|COPYING|dir) continue ;; \
 967           esac ; \
 968           file=`echo $${file} | sed 's/\.info//'` ; \
 969           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
 970         done ; \
 971         if test -n "$${missing}"; then \
 972           echo "Missing info/dir entries: $${missing}" ; \
 973           exit 1 ; \
 974         fi ; \
 975         echo "info/dir is OK"
 976
 977 #### Bootstrapping.
 978
 979 ### This first cleans the lisp subdirectory, removing all compiled
 980 ### Lisp files.  Then re-run make to build all the files anew.
 981
 982 .PHONY: bootstrap
 983
 984 # Bootstrapping does the following:
 985 #  * Remove files to start from a bootstrap-clean slate.
 986 #  * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
 987 #  * Rebuild Makefile, to update the build procedure itself.
 988 #  * Do the actual build.
 989 bootstrap: bootstrap-clean FRC
 990         cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
 991         $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
 992         $(MAKE) $(MFLAGS) info all
 993
 994 .PHONY: check-declare
 995
 996 check-declare:
 997         @if [ ! -f $(srcdir)/src/emacs ]; then \
 998           echo "You must build Emacs to use this command"; \
 999           exit 1; \
1000         fi
1001         (cd leim; $(MAKE) $(MFLAGS) $@)
1002         (cd lisp; $(MAKE) $(MFLAGS) $@)