1 2001-11-07 Eli Zaretskii <eliz@is.elta.co.il>
5 * make-dist (tempdir): Copy AUTHORS as well.
7 2001-11-01 Gerd Moellmann <gerd@gnu.org>
9 * configure.in: Remove doubled `;;'.
11 2001-11-01 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
13 * configure.in: Reindent --help output.
14 From Per Starback (starback@ling.uu.se).
16 2001-10-31 Eli Zaretskii <eliz@is.elta.co.il>
18 * configure.in: New entry for HP/UX-11.
20 * Makefile.in (SOURCES): Replace GETTING.GNU.SOFTWARE with FTP.
21 From Eric S. Raymond <esr@golux.thyrsus.com>.
23 2001-10-25 Gerd Moellmann <gerd@gnu.org>
25 * Makefile.in (maybe_bootstrap): New target.
26 (all): Add to prerequisites to bootstrap if abbrev.elc doesn't
29 2001-10-24 Gerd Moellmann <gerd@gnu.org>
31 * configure.in: Use $MAKE for `make' if set.
33 2001-10-22 Gerd Moellmann <gerd@gnu.org>
35 * Makefile.in (install-arch-indep): Add -h (follow symlinks)
38 2001-10-20 Gerd Moellmann <gerd@gnu.org>
40 * Version 21.1 released.
42 2001-10-19 Eli Zaretskii <eliz@is.elta.co.il>
44 * aclocal.m4: Remove the commented-out AC_PREREQ (it caused
45 trouble on Debian woody with both Autoconf 2.13 and 2.52
46 installed: the wrong version would be selected by Debian).
48 2001-10-19 Gerd Moellmann <gerd@gnu.org>
50 * configure.in: Use `=' instead of `=='. From Kenichi Handa
53 2001-10-18 Ken Raeburn <raeburn@mit.edu>
55 * configure.in: If --with-hesiod is given, look for
56 hes_getmailhost and res_send or __res_send; check hesiod and
57 resolv libraries respectively if system libraries don't supply
60 2001-09-05 Gerd Moellmann <gerd@gnu.org>
62 * configure.in: Avoid `$@' which is handled specially in
63 Autoconf 2.52. From "Adam J. Richter" <adam@yggdrasil.com>.
65 2001-09-01 Eli Zaretskii <eliz@is.elta.co.il>
67 * make-dist (nt): Add subdirs.el to the list of distributed files.
69 2001-08-14 Eli Zaretskii <eliz@is.elta.co.il>
71 * configure.in (machine): Add an entry for
72 hppa1.1-hitachi-hiuxwe2*.
74 2001-05-28 Gerd Moellmann <gerd@gnu.org>
76 * make-dist (LANG): Set LC_ALL and LANGUAGE to C, unset
77 LC_MESSAGES and LANG. From Karl Eichwalder <keichwa@gmx.net>.
79 2001-05-14 Gerd Moellmann <gerd@gnu.org>
81 * make-dist: Copy texinfo.tex unconditionally.
83 2001-04-25 Eli Zaretskii <eliz@is.elta.co.il>
85 * Makefile.in (install-arch-indep): Add gfdl.1 to the man pages
88 2001-04-06 Gerd Moellmann <gerd@gnu.org>
90 * make-dist: Copy only `[a-z]*.{el,elc}' from leim/quail.
91 Don't copy quick-b5, quick-cns, tsang-b5, and tsang-cns files.
93 * make-dist: Handle leim/MISC-DIC. Only include
94 `[a-zA-Z]*.{el,elc}' from leim/quail.
96 2001-04-05 Gerd Moellmann <gerd@gnu.org>
98 * Makefile.in (install-arch-indep): Remove .cvsignore files.
100 2001-03-30 Gerd Moellmann <gerd@gnu.org>
102 * Makefile.in (.PHONY): Add for bootstrap targets.
103 (bootstrap-clean): New target.
104 (bootstrap): Use it instead of `clean'.
106 2001-03-29 Eli Zaretskii <a34785@is.elta.co.il>
108 * Makefile.in (SUBDIR): Remove leim.
109 (all, .RECURSIVE, extraclean): Add leim explicitly.
110 (leim): Provide separate rule which exports PARALLEL=0 into the
113 2001-03-20 Gerd Moellmann <gerd@gnu.org>
115 * configure.in (HAVE_XPM): Don't print the result of the check for
116 XpmReturnAllocPixels if we don't have an xpm.h.
118 2001-03-05 Gerd Moellmann <gerd@gnu.org>
122 2001-03-04 Eli Zaretskii <eliz@is.elta.co.il>
124 * config.bat: Update the copyright.
126 2001-02-23 Kenichi Handa <handa@etl.go.jp>
128 * configure.in: Use AC_EGREP_CPP to check if the C preprocessor
129 converts `..' to `. .'. If it converts, set CPP_NEED_TRADITIONAL
130 to `yes'. Later in AC_OUTPUT, check this variable.
132 2001-02-09 Dave Love <fx@gnu.org>
136 2001-02-06 Eli Zaretskii <eliz@is.elta.co.il>
138 * info/dir (Ebrowse): Fix the entry (was missing a dot).
140 2001-02-02 Gerd Moellmann <gerd@gnu.org>
142 * mkinstalldirs (errstatus): Chmod a+rx directories we create.
144 * Makefile.in (uninstall): Ignore exit code of `rm'.
146 * Makefile.in (uninstall): Remove more info files. Remove
147 ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
149 2001-01-31 Gerd Moellmann <gerd@gnu.org>
151 * noleim-Makefile.in (extraclean): Add.
153 2001-01-28 Gerd Moellmann <gerd@gnu.org>
155 * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
158 2001-01-24 Colin Walters <walters@cis.ohio-state.edu>
160 * Makefile.in (tags): Fix typo.
162 2001-01-13 Kenichi Handa <handa@etl.go.jp>
164 * configure.in: Fix typo in the code setting x_search_path.
166 2001-01-10 Dave Love <fx@gnu.org>
168 * configure.in: Don't reset LIBS at end of -lXmu test. Test for
170 (HAVE_XKBGETKEYBOARD): Fix reporting of result.
171 (HAVE_LIBXP): Remove -lXt from AC_CHECK_LIB.
172 (HAVE_XAW3D, HAVE_XPM, HAVE_JPEG, HAVE_PNG, HAVE_TIFF, HAVE_GIF):
173 Don't frob CFLAGS. Remove extra X libs from AC_CHECK_LIB
176 2001-01-08 Eli Zaretskii <eliz@is.elta.co.il>
178 * config.bat: Run the preprocessor with -traditional.
180 2001-01-01 Eli Zaretskii <eliz@is.elta.co.il>
182 * INSTALL: Move copying conditions to end of file.
184 2000-12-27 Eli Zaretskii <eliz@is.elta.co.il>
186 * INSTALL: Add basic installation procedure which assumes
187 `configure' does its job. Elaborate on image support libraries.
188 Add a pointer to Xaw3d library. Add advice about solving
189 configure-time problems by looking in config.log and setting
190 variables in the environment.
192 2000-12-27 Gerd Moellmann <gerd@gnu.org>
194 * Makefile.in (install-arch-indep): If tar fails, exit with
197 2000-12-19 Gerd Moellmann <gerd@gnu.org>
199 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
200 source file includes XKBlib.h. On some broken Solaris systems,
201 there is an XKBlib.h, reportedly, but header files included by
202 XKBlib.h are missing.
204 2000-12-14 Gerd Moellmann <gerd@gnu.org>
206 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
208 2000-12-11 Dave Love <fx@gnu.org>
210 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
212 2000-12-11 Paul Eggert <eggert@twinsun.com>
214 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
215 Merge fixes from latest GNU tar version. These macros no longer
216 futz with _XOPEN_SOURCE, as that was not portable in practice.
217 (AC_FUNC_FSEEKO): New macro.
219 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
222 2000-12-05 Dave Love <fx@gnu.org>
224 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
226 2000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
228 * info/dir: Change the category to "Emacs".
230 2000-12-01 Gerd Moellmann <gerd@gnu.org>
232 * make-dist (tempdir): Remove epaths.h from the distribution
235 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
237 * config.bat: Check for existence of djecho.exe, and print an
238 error message if it is not available.
240 * INSTALL: Describe possible problem with djecho.exe in old
241 versions of DJGPP v2.x.
243 2000-11-23 Gerd Moellmann <gerd@gnu.org>
245 * configure.in: Initialize HAVE_LIBXP to no.
247 2000-11-22 Gerd Moellmann <gerd@gnu.org>
249 * configure.in: Use m/macppc.h instead of the non-existent
252 2000-11-21 Gerd Moellmann <gerd@gnu.org>
254 * Makefile.in (install-arch-indep): Also install info/eshell*
257 * configure.in (HAVE_PNG): Check for the presence of
258 png_get_channels to rule out older PNG libs.
260 * configure.in (AC_OUTPUT): Arrange to emit definitions of
261 GCC and NON_GNU_CPP into config.status.
263 2000-11-20 Dave Love <fx@gnu.org>
265 * configure.in: Fix last change.
267 * GETTING.GNU.SOFTWARE: Deleted.
268 * FTP: New file to replace it.
269 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
271 2000-11-20 Gerd Moellmann <gerd@gnu.org>
273 * configure.in: Use -traditional with GNU cpp.
275 2000-11-17 Gerd Moellmann <gerd@gnu.org>
277 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
278 Distribute more files from the nt/ subdir. Distribute PBM
279 image files from subdirs of lisp/. Distribute old change logs
280 from subdirs of lisp/. Distribute play/5x5.el.
282 2000-11-11 Dave Love <fx@gnu.org>
284 * config.sub, config.guess: Updated from master source.
286 2000-11-07 Dave Love <fx@gnu.org>
288 * configure.in: Test for mkstemp.
290 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
292 * info/dir (Top): Rearrange menu items more logically, and put
293 them into a single category. Add menu items for RefTeX and
296 2000-10-29 Kai Gro
\e,A_
\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
298 * Makefile.in (install-arch-indep): Use --info-dir instead of
299 --dir-file, and a simple argument instead of --info-file, so that
300 the Debian version of install-info also works.
302 2000-10-19 Eric M. Ludlam <zappo@ultranet.com>
304 * info/dir (Speedbar): Add entry.
306 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
308 * INSTALL: Describe the new image-support options to the configure
309 script. List URLs where image support libraries can be found.
311 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
313 * info/dir (Top): Add an entry for Eshell.
315 2000-10-02 Dave Love <fx@gnu.org>
317 * configure.in: Check for gai_strerror.
319 2000-10-01 Andreas Schwab <schwab@suse.de>
321 * Makefile.in (install-arch-indep): Update list of installed info
324 2000-09-30 Gerd Moellmann <gerd@gnu.org>
326 * configure.in: Support `sparc*-*-netbsd*'.
328 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
330 * info/dir (MIME): Add entry for emacs-mime.
332 2000-09-29 Dave Love <fx@gnu.org>
334 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
336 2000-09-26 Gerd Moellmann <gerd@gnu.org>
338 * make-dist: Adapt to the change of leim/Makefile which was
339 necessary to ensure a reasonably working `make dist'.
341 * leim-Makefile.in: Moved to leim/Makefile.in..
343 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
345 2000-09-21 Kenichi Handa <handa@etl.go.jp>
347 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
348 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
349 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
351 (${TIT}): Adjusted for the above change.
352 (clean mostlyclean): Likewise.
353 (.el.elc): New target.
355 2000-09-19 Gerd Moellmann <gerd@gnu.org>
357 * make-dist: Include XPM and XBM files in lisp/ and subdirs
360 2000-09-18 Gerd Moellmann <gerd@gnu.org>
362 * make-dist (skk): Rename to `ja-dic' because the leim directory
365 2000-09-14 Dave Love <fx@gnu.org>
367 * configure.in: Fix spurion in last change.
369 2000-09-14 Gerd Moellmann <gerd@gnu.org>
371 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
372 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
373 to `no' if defined. Change result report.
375 2000-09-08 Dave Love <fx@gnu.org>
377 * configure.in: Remove spurious `@'s.
379 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
382 2000-09-06 Gerd Moellmann <gerd@gnu.org>
384 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
385 file and print informational message.
387 * configure.in (AC_FUNC_MMAP): Add.
389 2000-09-01 Gerd Moellmann <gerd@gnu.org>
391 * configure.in: Add ``checking'' messages for
392 XpmReturnAllocPixels.
394 2000-08-28 Gerd Moellmann <gerd@gnu.org>
396 * configure.in: Check <strings.h>; check `index' and `rindex'
399 2000-08-26 Kenichi Handa <handa@etl.go.jp>
401 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
402 "case "${canonical}" in".
404 2000-08-25 Dave Love <fx@gnu.org>
406 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
408 2000-08-25 Kenichi Handa <handa@etl.go.jp>
410 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
412 2000-08-24 Gerd Moellmann <gerd@gnu.org>
414 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
415 contains a relative path. Protect against unusable values of
418 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
420 * info/dir (WoMan): Add entry.
422 * config.bat (maindir): Update src/_gdbinit even if it does
425 2000-08-07 Gerd Moellmann <gerd@gnu.org>
427 * Makefile.in (config.status): Prepend `$(srcdir)/' to
430 2000-08-03 Gerd Moellmann <gerd@gnu.org>
432 * configure.in: Add support for ia64*-*-linux*.
434 2000-07-27 Gerd Moellmann <gerd@gnu.org>
436 * make-dist (aclocal.m4): Include in distribution.
438 2000-07-26 Dave Love <fx@gnu.org>
440 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
442 2000-07-24 Dave Love <fx@gnu.org>
444 * configure.in: Add AC_SIZE_T.
446 2000-07-18 Dave Love <fx@gnu.org>
448 * configure.in: Reorder so that most tests are done after CPPFLAGS
449 is set from the C_SWITCH_... definitions.
451 2000-07-10 Gerd Moellmann <gerd@gnu.org>
453 * configure.in (HAVE_XPM): Undo previous change. Check for
454 preprocessor define XpmReturnAllocPixels.
456 2000-07-06 Gerd Moellmann <gerd@gnu.org>
458 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
459 instead of XpmReadFileToPixmap.
461 2000-07-05 Ken Raeburn <raeburn@gnu.org>
463 * configure.in: Check for <soundcard.h>. Look for ossaudio
464 library, and set LIBSOUND accordingly.
466 2000-07-05 Dave Love <fx@gnu.org>
468 * configure.in: Use AC_HEADER_SYS_WAIT.
470 2000-07-05 Gerd Moellmann <gerd@gnu.org>
472 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
473 lisp/Makefile. Distribute lisp/Makefile.in instead of
476 2000-06-30 Ken Raeburn <raeburn@gnu.org>
478 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
479 while searching for image-handling libraries.
481 2000-06-26 Gerd Moellmann <gerd@gnu.org>
483 * configure.in (--with-xim): New option.
485 2000-06-23 Dave Love <fx@gnu.org>
487 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
488 for struct timezone and test how we can call gettimeofday.
489 Check for OSF 5+. Check for term.h.
491 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
494 2000-06-23 Gerd Moellmann <gerd@gnu.org>
496 * configure.in (HAVE_LIBXP): Change test for libXp.
498 2000-06-21 Dave Love <fx@gnu.org>
500 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
501 simple test for getloadavg and substitute GETLOADAVG_LIBS.
502 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
504 2000-06-19 Dave Love <fx@gnu.org>
506 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
507 _XOPEN_SOURCE is defined.
509 2000-06-16 Gerd Moellmann <gerd@gnu.org>
511 * Makefile.in (distclean): Also make distclean in lisp/.
513 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
515 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
517 2000-06-15 Gerd Moellmann <gerd@gnu.org>
519 * make-dist: Add --help and --snapshot options.
521 2000-06-14 Gerd Moellmann <gerd@gnu.org>
523 * configure.in: Generate lisp/Makefile.
525 * configure.in: Add support for `*-lynxos*'.
526 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
527 recommended by <Karen.Dorhamer@compaq.com> to fix problems
530 2000-06-13 Ken Raeburn <raeburn@gnu.org>
532 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
533 it's on a continuation line.
535 2000-06-02 Dave Love <fx@gnu.org>
537 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
540 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
541 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
544 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
545 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
547 2000-05-26 Gerd Moellmann <gerd@gnu.org>
549 * configure.in: Add check for speed_t typedef.
551 2000-05-25 Ken Raeburn <raeburn@gnu.org>
553 * Makefile.in (install-arch-dep): Install fns-*.el only if it
554 exists; it won't in the CANNOT_DUMP case.
556 2000-05-25 Gerd Moellmann <gerd@gnu.org>
558 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
559 On FreeBSD, the exit status is 1 if CDPATH is not set.
560 (install-arch-indep): Install ebrowse.info.
562 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
564 * configure.in: Check for grandpt and getpt.
566 2000-05-09 Dave Love <fx@gnu.org>
568 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
570 2000-05-05 Gerd Moellmann <gerd@gnu.org>
572 * make-dist: Make a link for lib-src/grep-changelog. Copy
575 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
577 * config.bat: Identify the beginning of the cpp stuff in
578 src/Makefile.in and lib-src/Makefile.in more accurately.
580 2000-04-27 Gerd Moellmann <gerd@gnu.org>
582 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
584 2000-04-19 Gerd Moellmann <gerd@gnu.org>
586 * configure.in: Add support for `powerpc-*-netbsd*'.
588 2000-04-19 Dave Love <fx@gnu.org>
590 * configure.in: Don't use AC_FUNC_GETLOADAVG.
592 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
594 2000-04-16 Dave Love <fx@gnu.org>
596 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
598 2000-04-14 Dave Love <fx@gnu.org>
600 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
602 * aclocal.m4 (AC_FUNC_MKTIME): New.
604 2000-03-28 Ken Raeburn <raeburn@gnu.org>
606 * configure.in: Line up "--help" output a little better.
608 2000-03-26 Gerd Moellmann <gerd@gnu.org>
610 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
612 (bootstrap): Rewritten in terms of the new targets above. Make
615 2000-03-12 Gerd Moellmann <gerd@gnu.org>
617 * config.guess, config.sub: Use the versions of the files from
620 2000-03-08 Dave Love <fx@gnu.org>
622 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
623 AC_C_VOLATILE. Define POINTER_TYPE.
625 * aclocal.m4: New file.
627 2000-03-02 Gerd Moellmann <gerd@gnu.org>
629 * configure.in (machine): Add `mipsel-*-netbsd*' and
632 2000-03-01 Gerd Moellmann <gerd@gnu.org>
634 * configure.in (machine): Add support for `*-auspex-sunos*'.
636 2000-02-29 Gerd Moellmann <gerd@gnu.org>
638 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
640 2000-02-18 Dave Love <fx@gnu.org>
642 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
644 2000-02-18 Andreas Schwab <schwab@suse.de>
646 * Makefile.in (install-arch-indep): Add eudc to list of installed
649 2000-02-17 Ken Raeburn <raeburn@gnu.org>
651 * configure.in: Include -lz and -ljpeg (if it's available) when
652 testing for the tiff library.
654 2000-02-17 Gerd Moellmann <gerd@gnu.org>
656 * configure.in: Remove LISP_FLOAT_TYPE.
658 2000-02-12 Dave Love <fx@gnu.org>
660 * configure.in: Use AC_FUNC_VFORK.
662 2000-02-01 Gerd Moellmann <gerd@gnu.org>
664 * make-dist: Various fixes for new development tree.
666 * leim-Makefile.in: New file.
668 2000-01-31 Gerd Moellmann <gerd@gnu.org>
670 * Makefile.in (dist): Call ./make-dist.
672 2000-01-24 Dave Love <fx@gnu.org>
674 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
676 2000-01-18 Gerd Moellmann <gerd@gnu.org>
678 * configure.in (HAVE_GIF): Check for DGifOpen instead of
681 2000-01-11 Andreas Schwab <schwab@suse.de>
683 * Makefile.in (install-arch-indep): Update list of info files to
686 2000-01-05 Dave Love <fx@gnu.org>
688 * configure.in: Check for jerror.h as well as libjpeg.
690 2000-01-03 Andreas Schwab <schwab@suse.de>
692 * Makefile.in (install-arch-indep): Install autotype*. Run
693 install-info on autotype and emacs-faq.info.
695 1999-12-04 Dave Love <fx@gnu.org>
697 * Makefile.in: (install-arch-indep): Depend on `info'.
698 (install-strip): Use `install' as sub-make target.
700 1999-11-23 Ken Raeburn <raeburn@gnu.org>
702 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
703 didn't need to be deleted. Check for the k5crypto library as well
704 as the crypto library; MIT Kerberos 1.1 changed the name.
706 1999-11-18 Dave Love <fx@gnu.org>
708 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
710 1999-11-11 Erik Naggum <erik@naggum.no>
712 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
714 1999-11-08 Dave Love <fx@gnu.org>
716 * configure.in: Fix change for --with-pop default.
718 1999-11-04 Dave Love <fx@gnu.org>
720 * configure.in: Default to --with-pop. Change sense of with-gcc
721 and with-toolkit-scroll-bars messages to reflect the defaults.
723 1999-11-01 Gerd Moellmann <gerd@gnu.org>
725 * INSTALL: Mention the Emacs Lisp Reference.
727 1999-10-27 Noah Friedman <friedman@splode.com>
729 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
731 1999-10-23 Gerd Moellmann <gerd@gnu.org>
733 * Makefile.in (bootstrap): New target.
735 1999-10-19 Paul Eggert <eggert@twinsun.com>
737 Add support for large files. Merge glibc 2.1.2.
739 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
740 (HAVE_TM_GMTOFF): New symbol.
741 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
743 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
745 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
747 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
748 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
750 1999-10-09 Richard M. Stallman <rms@gnu.org>
752 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
753 Unset CDPATH to prevent cd from generating output.
755 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
757 * update-subdirs: also ignore CVS subdirs.
759 1999-10-07 Gerd Moellmann <gerd@gnu.org>
761 * Makefile.in (install-arch-indep): Add ada-mode.
763 1999-10-06 Dave Love <fx@gnu.org>
765 * Makefile.in: Add rules for config.status, configure.
767 1999-09-07 Gerd Moellmann <gerd@gnu.org>
769 * configure.in (--with-sound): Removed.
771 1999-08-30 Gerd Moellmann <gerd@gnu.org>
773 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
775 (HAVE_TIFF): Add -lm to library check.
777 1999-08-28 Richard Stallman <rms@gnu.org>
779 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
780 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
781 after the other X-related libraries.
783 1999-08-21 Dave Love <fx@gnu.org>
785 * configure.in: Don't check for jpeglib.h.
787 1999-08-20 Gerd Moellmann <gerd@gnu.org>
789 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
790 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
792 1999-08-18 Dave Love <fx@gnu.org>
794 * configure.in: : Check for termcap.h.
796 1999-08-15 Gerd Moellmann <gerd@gnu.org>
798 * configure.in: Add --with-toolkit-scroll-bars. If "no",
799 use Emacs' scroll bars, even if configured for Motif or when
802 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
804 * configure.in: Check for getaddrinfo.
806 1999-08-04 Eli Zaretskii <eliz@gnu.org>
808 * config.bat: Make --no-debug work again by removing -gcoff.
810 1999-07-30 Dave Love <fx@gnu.org>
812 * configure.in: Check for stdlib.h.
814 1999-07-19 Dave Love <fx@gnu.org>
816 * configure.in: Grok sparc64-*-linux-gnu*.
818 1999-07-12 Richard Stallman <rms@gnu.org>
820 * Version 20.4 released.
822 1999-06-23 Karl Heuer <kwzh@gnu.org>
824 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
825 Quote $EMACS, in case it's a program with args.
827 1999-05-29 Richard M. Stallman <rms@gnu.org>
829 * configure.in: Delete the Kerberos stuff.
831 1999-05-27 Greg Hudson <ghudson@mit.edu>
833 * configure.in: Prefer kerberos 5 names.
835 1999-04-26 Richard M. Stallman <rms@gnu.org>
837 * configure.in: Check for libXp.
839 1999-04-08 Richard Stallman <rms@gnu.org>
841 * make-dist: Include change logs in subdirs of `lisp'.
843 1999-04-05 Richard Stallman <rms@gnu.org>
845 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
846 (install-arch-indep): Make ${datadir}/emacs world-readable.
848 1999-03-30 Eli Zaretskii <eliz@gnu.org>
850 * config.bat: Use epaths.* instead of paths.*.
852 1999-03-07 Eli Zaretskii <eliz@gnu.org>
854 * INSTALL: Add detailed instructions to unpack and install
857 1999-02-26 Richard Stallman <rms@gnu.org>
859 * configure.in: Use epaths.h and epaths-force instead of paths....
861 * Makefile.in (epaths-force): Renamed from paths-force;
862 operate on epaths.in and produce epaths.h.
864 1999-02-24 Richard Stallman <rms@gnu.org>
866 * make-dist: Fix nt/icons directory handling.
868 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
870 * configure.in (f301-fujitsu-uxpv4.1): New target.
872 1999-02-20 Richard Stallman <rms@gnu.org>
874 * make-dist (tempparent): Fix command to update info files.
876 1999-02-09 Richard Stallman <rms@gnu.org>
878 * configure.in (powerpc-apple-netbsd*): New alternative.
880 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
882 * make-dist: Include the new directory nt/icons in distributions.
884 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
886 * configure.in: Change message about HAVE_XFREE386.
888 1999-01-07 Eli Zaretskii <eliz@gnu.org>
890 * config.bat: Support configuring with leim.
892 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
894 * configure.in (mips-sgi-irix6.5): New target.
896 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
898 * configure.in: Remove GSS-API support, since it has been removed
901 1998-12-04 Markus Rost <rost@delysid.gnu.org>
903 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
905 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
907 * Makefile.in: Don't install customize info file. Run
908 install-info on viper info file.
910 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
912 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
914 1998-11-16 Kenichi Handa <handa@etl.go.jp>
916 * configure.in (*-*-bsdi4*): New target.
918 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
920 * configure.in: Fix previous change.
922 1998-11-11 Richard Stallman <rms@gnu.org>
924 * configure.in (aviion-intel): New machine.
926 1998-11-04 Kenichi Handa <handa@etl.go.jp>
928 * configure.in (mips-nec-sysv4*): New target.
930 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
932 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
935 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
937 * make-dist: Don't include fns*.el in dist.
939 1998-10-30 Dave Love <fx@gnu.org>
941 * configure.in: Don't mkdir cpp.
943 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
945 * Makefile.in (install-arch-dep): Install src/fns-*.el in
948 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
950 * Version 20.3 released.
952 1998-07-30 Paul Eggert <eggert@twinsun.com>
954 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
955 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
956 (lwlib/Makefile, leim/Makefile):
957 Prepend $(srcdir)/ to rule dependencies outside this dir.
959 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
961 * configure.in: Use unset CDPATH instead of making it empty.
963 1998-06-20 Karl Heuer <kwzh@gnu.org>
965 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
967 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
969 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
970 and default.el. Sort the results.
972 1998-05-31 Karl Heuer <kwzh@gnu.org>
974 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
977 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
979 * Makefile.in (install-arch-indep):
980 Don't alter site-lisp/subdirs.el if it exists.
982 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
984 * Makefile.in (install-arch-indep): Put `-' on commands to create
985 subdirs.el in site-lisp dirs.
987 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
989 * Makefile.in (install-arch-indep): Fix typo in previous change.
991 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
993 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
995 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
997 * Makefile.in (mkdir): Create the site-lisp dirs.
998 (install-arch-indep): Make site-lisp/subdirs files world-readable.
1000 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
1002 * Makefile.in (INSTALL_INFO): New variable.
1003 (install-arch-indep): Don't replace the dir file if it already exists.
1004 Use the install-info program, via INSTALL_INFO, to add entries.
1005 Make the `info' subdir and the Info files world-readable.
1007 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
1009 * config.bat: Make sure the environment is large enough to support
1010 all the "set foo=bar" commands. Update pointers to DJGPP FTP
1013 1998-04-10 Karl Heuer <kwzh@gnu.org>
1015 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
1017 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1019 * configure.in: Add --with-gssapi to specify GSS-API
1020 authentication support for movemail.
1022 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
1024 * Makefile.in (install-arch-indep): Fix previous change.
1026 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
1028 * Makefile.in (info): Run man in build dir, not srcdir.
1030 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
1032 * Makefile.in (install-arch-indep): Fix previous change.
1034 1998-03-23 Kenichi Handa <handa@etl.go.jp>
1036 * Makefile.in (top_distclean): Check the existence of `lock'
1039 1998-03-22 Richard Stallman <rms@gnu.org>
1041 * Makefile.in (install-arch-indep): Put special subdirs.el files
1042 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
1044 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
1046 * make-dist: Fix shell syntax in check for missing .el or .elc files.
1048 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
1050 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
1051 (m68*-hp-hpux*): Handle versions 1X like 10.
1053 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
1055 * make-dist: PROBLEMS is now in etc, not top level dir.
1057 * Makefile.in (SOURCES): Delete PROBLEMS.
1059 1998-02-25 Richard Stallman <rms@gnu.org>
1061 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
1063 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
1065 1998-01-17 Richard Stallman <rms@gnu.org>
1067 * Makefile.in (install-arch-indep): Add semicolon before `else'.
1069 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
1071 * make-dist (tempparent): New option --no-check.
1073 * make-dist: Don't do anything with cpp directory.
1075 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
1077 * configure.in (sparc-fujitsu-sysv4*): New target.
1079 1997-12-17 Andreas Schwab <schwab@gnu.org>
1081 * configure.in: Cache more tests. Add missing quotes around
1082 message with embedded comma.
1084 1997-12-04 Karl Heuer <kwzh@gnu.org>
1086 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
1088 1997-11-26 Joel N. Weber II <devnull@gnu.org>
1090 * make-dist: Changed the comment about `umask 0' to say `Don't
1091 restrict access to any files.'; previously it said `Don't protect
1092 any files', which may have implied that we think fascism is good.
1094 1997-11-24 Paul Eggert <eggert@twinsun.com>
1096 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
1097 strftime needs the underlying host's strftime for locale dependent
1100 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
1102 * configure.in (i586-dg-dguxR4.*): New name in case branch.
1104 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
1106 * config.bat: Configure the man subdirectory.
1108 1997-11-07 Paul Eggert <eggert@twinsun.com>
1110 * configure.in (AC_CHECK_LIB): Add -lintl.
1112 1997-11-07 Karl Heuer <kwzh@gnu.org>
1114 * make-dist (check for .elc files): Avoid bash-specific syntax.
1115 (check for overflow 14-char limit): Simplify.
1117 1997-11-07 Richard Stallman <rms@gnu.org>
1119 * Makefile.in (install): Move blessmail last.
1121 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1123 * configure.in (gettimeofday, one arg or two):
1124 Clarify messages by avoiding double negative.
1126 1997-09-30 Karl Eichwalder <ke@suse.de>
1128 * Makefile.in (install-arch-indep): install the widget info file.
1130 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1132 * configure.in (with-pop, with-kerberos): Need to check Kerberos
1133 libraries in reverse order, so that libraries will appear in the
1134 correct dependency order on the link line (and so that the
1135 configure checks themselves will work properly when early
1136 libraries depend on later ones).
1138 1997-09-21 Erik Naggum <erik@naggum.no>
1140 * make-dist (making links to `src'): Keep timestamp on copied
1143 * make-delta: New script to produce delta distributions.
1145 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1147 * Version 20.2 released.
1149 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1151 * Version 20.1 released.
1153 * Makefile.in (install-leim): Depend on mkdir.
1154 (leim): Depend on src.
1156 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1158 * configure.in: Recognize alpha* instead of just alpha.
1160 1997-09-12 Paul Eggert <eggert@twinsun.com>
1162 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1164 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1166 * update-subdirs: Use rm -f.
1168 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1170 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1171 Ignore subdirs named Old.
1173 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1175 * configure.in: Add OpenBSD clause to set $machine.
1177 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1179 * make-dist: Recompile everything after updating various Lisp files.
1180 Recompile in leim as well as lisp.
1181 Check in leim as well as lisp for mismatched files and too-long names.
1183 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1185 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1187 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1189 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1190 before trying to copy anything from it.
1192 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1194 * Makefile.in (man/Makefile): New target.
1195 (tags): Define env var EMACS and run Makefile from build dir.
1197 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1199 * config.bat: If src/_gdbinit doesn't exist, try using
1200 src/.gdbinit to create it (for building on Windows 95).
1202 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1204 * Makefile.in (install-arch-indep):
1205 Discard extra data in tar | tar pipes.
1207 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1209 * configure.in (x_default_search_path): Corrected
1210 '${x_library}' to '${x_library}/X11'.
1212 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1214 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1216 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1218 * configure.in: Support auto-configuration of both Kerberos V4 and
1219 Kerberos V5 for movemail, including detection of V4 and V5 header
1220 files and libraries.
1222 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1224 * configure.in: Compute x_default_search_path
1225 and substitute into makefiles.
1227 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1229 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1231 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1233 1997-08-07 Erik Naggum <erik@naggum.no>
1235 * configure.in: Remove lockdir, it is no longer needed.
1236 * Makefile.in (mkdir): Don't create lockdir.
1237 (lockdir): Variable deleted.
1238 (paths-force): Don't operate on PATH_LOCK.
1240 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1242 * leim-Makefile.in (clean, distclean): New targets.
1244 * make-dist: Include leim/ChangeLog in leim distribution.
1246 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1248 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1250 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1252 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1254 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1256 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1258 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1260 * make-dist: Update leim/leim-list.el.
1261 Pass along value of $EMACS when updating lisp dir.
1263 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1265 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1266 prerequisite to the use of Doug Lea's malloc.
1268 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1270 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1272 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1274 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1276 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1278 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1280 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1283 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1285 * config.bat: Use `sed' instead of `cp', which might not be
1288 1997-07-09 Kenichi Handa <handa@etl.go.jp>
1290 * Makefile.in (mostlyclean): Add cleaning leim directory.
1291 (clean, distclean, maintainer-clean): Likewise.
1293 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1295 * make-dist (bogosities): Check subdirs of `lisp' also.
1297 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1299 * make-dist (etc): Really avoid symlinks now.
1300 (lisp): Don't delete from subdirs the things we never copy.
1302 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1304 * Makefile.in (install-arch-indep): Correct the target name.
1305 The first letter `i' was dropped by the previous change of mine.
1307 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1309 * configure.in (leim/Makefile): Generate this.
1310 (*-sysv4.2uw*): Recognize new alternative.
1312 * leim-Makefile.in: Renamed from leim-Makefile.
1314 * make-dist: Set up real-leim subdirectory,
1315 with the real contents of leim; then move it to
1316 a separate top-level directory.
1318 * make-dist: Don't mention site-lisp, site-init, site-start
1319 or default, when listing files hat are not compiled and should be.
1321 * configure.in: Create src/config.stamp at the end.
1323 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1325 * Makefile.in (install-leim): Correct previous change.
1327 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1329 * Makefile.in (install-leim): New target.
1330 (install): Depend on install-leim.
1332 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1334 * Makefile.in (SUBDIR): Add leim.
1335 (SUBDIR_MAKEFILES): Add leim/Makefile.
1336 (leim/Makefile): New target.
1338 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1340 * leim-Makefile: New file.
1341 * make-dist: Initialize a `leim' subdirectory with that makefile.
1343 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1345 * configure.in (GNU_MALLOC_reason): Fix message text.
1347 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1349 * make-dist (lisp): Don't process subdirs that start with =.
1350 (etc): Copy symlinks, as in src.
1352 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1354 * configure.in (i*86-*-unixware*): New alternative.
1356 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1358 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1359 and touch it explicitly.
1361 * configure.in (mips-sony-newsos6*): New alternative.
1362 (mips-*-linux-gnu*): New alternative.
1363 (*-*-bsdi*): New alternative.
1364 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1366 1997-06-22 Dave Love <d.love@dl.ac.uk>
1368 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1370 (src/config.h): New target to re-configure if src/config.in
1373 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1375 * configure.in (shutdown): Check for `shutdown' function.
1377 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1379 * update-subdirs: Include the directory "language" in subdirs.
1381 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1383 * configure.in (m88k-dg-dgux4*): New alternative.
1384 (alpha-*-netbsd*): New alternative.
1385 (powerpcle-*-solaris2*): New alternative.
1387 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1389 * make-dist: Warn about .el files that are not compiled.
1391 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1393 * Makefile.in (dist): Don't run update-subdirs here,
1394 since make-dist now gets that done.
1396 * make-dist: Use the new `updates' target in lisp/Makefile.
1398 * make-dist: Use new non-file targets in lisp/Makefile.
1400 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1402 * make-dist: Handle all subdirs of `lisp' uniformly.
1403 Don't handle `term' and `language' specially.
1404 Clear out umask at the beginning.
1406 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1408 * make-dist: Use Make to update finder-inf.el and autoloads.
1409 Also update cus-load.el.
1411 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1413 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1414 in case it is desirable to disable the GNU malloc features with
1417 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1419 * configure.in (DOUG_LEA_MALLOC):
1420 Define if malloc_{get,set}_state exist.
1422 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1424 * make-dist: Make links for files under lisp/language.
1426 1997-02-20 Kenichi Handa <handa@etl.go.jp>
1428 * update-subdirs: Exclude the directory "language" from subdirs.
1430 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1432 * configure.in: Check for rint and cbrt.
1434 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1436 * make-dist: Use $EMACS to say where to run Emacs.
1437 Add --no-update option.
1439 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1441 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1443 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1445 * make-dist (copying src): Check thoroughly for symlinks
1446 and copy them in all cases. Regularize the linking of *.in
1447 and *.opt and ChangeLog files.
1448 (copying lib-src): Likewise.
1449 Don't rm getdate.c or y.tab.*--they don't exist any more.
1451 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1453 * configure.in: Check for libmail, maillock.h and
1454 touchlock (for movemail).
1456 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1458 * configure.in (limits.h): Check for this file.
1460 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1462 * configure.in (rs6000-ibm-aix4.2): New alternative.
1463 (rs6000-ibm-aix4.0): New alternative.
1464 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1466 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1468 * configure.in: Recognize vax-*-netbsd*.
1470 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1472 * configure.in (locallisppath): Add leim directory.
1474 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1476 * config.bat: Make sure `mv' supports forward slashes and -f.
1478 1996-10-28 Christian Limpach <chris@nice.ch>
1480 * configure.in (hppa*-next-nextstep*): * added after hppa
1481 to accept hppa1.0 and hppa1.1.
1483 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1485 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1486 * configure.in (ld_switch_machine): Fix typo.
1488 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1490 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1491 from config.h and use them in $ac_link.
1493 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1495 * configure.in: Create a subdir named `lisp'.
1497 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1499 * configure.in: Check for getcwd.
1501 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1503 * configure.in: Check for termios.h. Check for setpgid.
1505 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1507 * configure.in: Check for setrlimit.
1509 1996-08-31 Paul Eggert <eggert@twinsun.com>
1511 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1513 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1515 * configure.in: Check for utimes.
1517 * configure.in: Check for com_err library, but only
1518 if --with-kerberos was used. Check for krb and des
1519 only if --with-kerberos.
1521 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1523 * Makefile.in (INSTALL_STRIP): New variable.
1524 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1525 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1527 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1529 * configure.in: Check for krb and des libraries.
1531 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1533 * configure.in (*-sunos4.1.[3-9]*noshare):
1534 Use sunos413, not sunos4-1-3.
1535 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1536 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1538 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1540 * Makefile.in (src/paths.h): Target deleted.
1541 (paths-force): Delete all dependencies on this target
1542 but don't delete the target.
1543 (install): Depend on `all'.
1544 (paths-force): Don't print a message.
1546 * configure.in: Generate src/paths.h here.
1548 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1550 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1551 New variables that affect linking only.
1552 (alpha-dec-osf*): Use those instead of previous change.
1554 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1556 * Makefile.in (install-arch-indep): Install info/messages.
1558 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1560 * Version 19.33 released.
1562 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1564 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1565 Fix previous change.
1567 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1569 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1572 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1574 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1575 and NON_GCC_TEST_OPTIONS.
1577 1996-08-06 Paul Eggert <eggert@twinsun.com>
1579 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1580 "TZ=..." in environ.
1582 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1584 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1586 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1588 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1589 the more general *-sunos4.1.[3-9]* clause.
1591 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1593 * Version 19.32 released.
1595 * configure.in (*-sco3.2v5*):
1596 Set OVERRIDE_CPPFLAG to a string of one space.
1597 Fix the code that uses OVERRIDE_CPPFLAG.
1599 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1601 * configure.in: Undo previous change.
1603 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1605 * config.sub: Use `pc', not `unknown', when canonicalizing
1606 the vendor for ...86.
1608 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1610 * configure.in: Check for termios.h header.
1612 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1614 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1616 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1618 * configure.in: Split bsdos2 and bsdos2-1.
1620 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1622 * config.sub: If last two words are not a recognized
1623 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1624 Make conversion of gnu/linux to linux-gnu really work.
1626 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1628 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1630 * configure.in (check for using Lucid widgets by default):
1631 Eliminate indentation that confuses some compilers.
1633 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1635 * config.sub: Convert linux and gnu/linux to linux-gnu.
1637 * make-dist: Don't update getdate.c.
1638 Ignore =... files when checking for too-long Lisp file names.
1640 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1642 * configure.in (euidaccess): Check for that, not for eaccess.
1644 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1646 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1648 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1650 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1652 * configure.in: Rename lignux to linux-gnu in configuration names.
1653 Use gnu-linux as the opsys value (s/ file name).
1654 Allow i686 just like i386, i486, i586.
1656 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1658 * configure.in (i*86-*-sco3.2v5): New alternative.
1659 (OVERRIDE_CPPFLAG): New variable.
1660 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1662 * configure.in: Specify vpath for .texi files.
1664 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1666 * configure.in: Always check for HAVE_X11R5.
1667 Separately decide whether to use a toolkit by default.
1669 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1671 * configure.in: If X11R5 is missing the Xaw headers,
1672 default to --with-x-toolkit=no.
1674 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1676 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1678 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1680 * Makefile.in (install-arch-indep): If cd etc makes output,
1681 don't treat that as part of the tar data.
1682 Check that ./lisp actually exists.
1684 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1686 * make-dist: Check for long file names.
1688 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1690 * Version 19.31 released.
1692 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1694 * configure.in: Recognize sparc-*-lignux.
1696 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1698 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1699 Don't include config.w95.
1701 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1703 * make-dist: Replace --no-clean-up and --no-tar options
1704 with --clean-up and --tar, so that the default is useful.
1706 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1708 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1709 if not, tell the user to rename it and abort.
1711 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1713 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1716 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1718 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1720 * make-dist (MANIFEST): Fix previous change.
1721 (msdos): Put mainmake.v2 into the dist.
1723 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1725 * make-dist: Exit if autoconf fails.
1727 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1729 * config.bat: Set djgpp-ver, and unset it at the end.
1730 Add a number of conditionals for DJGPP version 2.
1731 Rename label libsrc2 to libsrc3.
1732 Substitute for LDFLAGS in src/Makefile.
1733 Substitute for ALL_CFLAGS in lib-src/Makefile.
1735 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1737 * configure.in (ncurses): Check this after checking fns like strerror.
1739 1996-04-08 Erik Naggum <erik@naggum.no>
1741 * make-dist (MANIFEST): Don't include lines from =files.
1743 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1745 * make-dist: Don't put lisp/dired.todo in the dist.
1747 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1749 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1751 * configure.in (setlocale): Check for it.
1753 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1755 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1757 * configure.in: Use lignux instead of linux as value of opsys.
1759 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1761 * Makefile.in (install-strip): Fix whitespace.
1762 Get rid of continuation.
1764 * config.sub: Convert linux or gnu/linux to lignux.
1766 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1768 * configure.in: Accept lignux in configuration name.
1770 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1772 * Makefile.in (install-strip): New target.
1774 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1776 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1777 -f failed to do the job on Suns.
1779 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1781 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1783 * configure.in (linux/version.h): Check for this header.
1785 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1787 * configure.in: Remove -fno-builtin hackery from -lm check.
1789 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1791 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1794 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1796 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1798 * configure.in: Check for ncurses.
1800 1996-02-28 Paul Eggert <eggert@twinsun.com>
1802 * configure.in (LOCALTIME_CACHE):
1803 Also define if localtime mishandles unsetting TZ.
1804 This works around a localtime bug in mips-dec-ultrix.
1806 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1808 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1810 * configure.in: Improve messages about X versions.
1812 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1814 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1816 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1818 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1819 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1821 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1822 (install): Put install-arch-indep before install-arch-dep.
1824 1996-02-20 Dave Love <d.love@dl.ac.uk>
1826 * INSTALL: Clarify info about MS-DOS path handling.
1828 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1830 * Makefile.in (install-arch-indep): Install info/ccmode*.
1831 In previous change, protect against /bin/pwd returning null string.
1833 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1835 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1838 1996-02-01 Paul Eggert <eggert@twinsun.com>
1840 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1842 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1844 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1846 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1848 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1849 we delete everything distclean deletes.
1851 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1853 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1855 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1857 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1858 into LDFLAGS instead of into LIBS.
1860 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1862 * configure.in (HAVE_XMU): Fix typo in previous change.
1864 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1866 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1868 1996-01-10 Erik Naggum <erik@naggum.no>
1870 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1872 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
1874 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
1876 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1878 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
1879 and use -lXt to link it.
1881 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1883 * configure.in (locallisppath): Put version-specific dir first.
1885 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1887 * configure.in (hppa-*-nextstep*): New alternative.
1888 (USE_X_TOOLKIT): By default, set this to "maybe";
1889 and change that later to LUCID or "no" according to X11 version.
1891 * make-dist: Recompile outdated .elc files and update all autoloads.
1893 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
1895 * configure.in (locallisppath): Fix typo in last change: " -> '.
1897 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1899 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
1901 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1903 * Makefile.in (install-arch-indep): Give all files read permission.
1905 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1907 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
1908 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
1910 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1912 * configure.in: Determine HAVE_X11R6.
1913 (HAVE_MENUS): Renamed from HAVE_X_MENU.
1915 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1917 * configure.in: Just "solaris" now defaults to version 2.4.
1918 Add sunos4.1.n-noshare as alternative.
1920 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1922 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
1924 1995-11-29 Erik Naggum <erik@naggum.no>
1926 * Makefile.in (install-arch-indep): Add missing backslash.
1928 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
1930 * Makefile.in (install-arch-indep): Don't install
1931 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
1933 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1935 * Makefile.in (install-arch-indep): Fix previous change.
1937 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
1939 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1941 * Version 19.30 released.
1943 * make-dist (lisp): Exclude subdirs.el.
1945 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1947 * make-dist (etc): Delete *.orig and *.rej.
1949 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1951 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
1953 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1955 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
1957 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
1959 * make-dist (nt): Rename install, readme, and todo to
1960 INSTALL, README, and TODO.
1962 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1964 * make-dist (lisp): Don't distribute site-start.
1966 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
1968 * make-dist: Break the hard link on alloca.c.
1970 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1972 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
1974 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
1976 * make-dist (src, lib-src): Don't distribute Makefile.c.
1977 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
1979 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1981 * Makefile.in (mkdir): Create man1dir, not mandir.
1982 (uninstall): Use man1dir, not mandir.
1984 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1986 * Makefile.in (man1dir): New variable.
1987 (install-arch-indep): Use man1dir.
1989 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
1991 * make-dist: Create lisp/MANIFEST.
1993 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1995 * configure.in (m68k-*-linux*): New alternative.
1997 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1999 * make-dist: Use new names config.in, paths.in, and
2000 {src,lib-src}/Makefile.in.
2002 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2004 * configure.in: Don't bother checking for drem.
2006 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2008 * Makefile.in (distclean): Delete line with just a tab in it.
2009 (install-arch-indep): Delete spaces that precede tabs.
2010 Delete spurious `fi' left from previous change.
2011 (install): Supply `true' as command, to avoid null command.
2013 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2015 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
2017 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2019 * configure.in (powerpc-*-solaris2): New alternative.x
2021 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
2023 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
2024 of paths.h.tmp$$, to avoid going beyond 14 characters.
2026 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2028 * configure.in: Improve error msg for invalid --with-x-toolkit value.
2030 1995-09-06 Paul Eggert <eggert@twinsun.com>
2032 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
2033 if localtime caches TZ. Check for tzset.
2035 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2037 * config.bat: Simplify using new names file names src/makefile.in,
2038 config.in, paths.in. Change Echo commands not to use `.
2040 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2042 * Makefile.in (install-arch-indep): Always install the new dir file;
2043 rename the previous dir file to dir.bak or dir.old.
2045 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2047 * configure.in (RANLIB): Substitute this into makefiles.
2048 Set it specially on solaris; set it by default on other systems.
2050 * configure.in: Fix previous Alpha change.
2052 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2054 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
2055 NON_GCC_TEST_OPTIONS.
2057 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2059 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
2060 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
2062 * configure.in (alpha-*-linux*): New configuration.
2064 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2066 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
2067 (m68k-next-nextstep*): New alias for that.
2068 (i*86-*-nextstep*): Use nextstep.h.
2069 (sparc-*-nextstep*): New configuration.
2071 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2073 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
2074 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
2076 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2078 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
2079 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
2081 1995-07-18 Mike Long <mike.long@analog.com>
2083 * make-dist: Fix update of finder-inf.el, and byte-compile it.
2085 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2087 * Makefile.in (src/paths.h, paths-force):
2088 Rename src/paths.h.in to src/paths.in.
2089 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
2091 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
2092 Use Makefile.c for intermediate file.
2093 Rename src/config.h.in to src/config.in.
2095 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
2097 * configure.in (mips-dec-ultrix*): Assume version 4.3.
2098 (mips-dec-ultrix4.[12]): New alternative for old versions.
2100 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2102 * make-dist: Don't break intra-tree links.
2104 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2106 * configure.in: Put back archlibdir initialization. Require
2107 autoconf 2.4.1 or later.
2109 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2111 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
2112 (mips-mips-riscos5*): New alternative.
2114 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2116 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
2118 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2120 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
2121 (mandir, infodir, archlibdir): Initializations deleted.
2123 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
2124 On hpux9shr, use hpux9shxr4.h.
2126 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
2128 * configure.in: Added target mips-dec-mach_bsd4.3.
2129 * config.guess: Guess mips-dec-mach_bsd4.3.
2131 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2133 * Makefile.in (mkdir): Use symbolic chmod.
2135 1995-06-22 Paul Eggert <eggert@twinsun.com>
2137 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2138 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2140 1995-06-22 Paul Eggert <eggert@twinsun.com>
2142 * Makefile.in (SUBDIR_MAKEFILES):
2143 Add man/Makefile, so `make distclean' removes it.
2144 (top_distclean): Add config.log to the list of files to be removed.
2146 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2148 * Version 19.29 released.
2150 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2152 * configure.in: Fix the previous change to verify that the -b
2153 option really solves the problem.
2155 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2157 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2159 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2161 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2163 * configure.in: Report more clearly when there is no special
2164 dir to search for X includes or libraries.
2166 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2168 * configure.in: Check for -lpthreads, not -lpthread.
2170 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2172 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2174 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2176 * configure.in: Check for -lpthread.
2178 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2180 * Makefile.in (install-arch-indep): Install info files for mh-e.
2181 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2183 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2185 * configure.in (*-solaris2.5): New configuration.
2187 * make-dist: Copy new files config.nt and config.w95.
2189 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2191 * configure.in: Use x_includes, not x_libraries, for -I.
2192 Make bitmapdir a colon-separated list.
2194 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2196 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2198 * configure.in: Allow x_libraries and x_includes to be paths.
2200 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2202 * configure.in: Fix typo.
2204 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2206 * INSTALL: Clarify use of site-init.el.
2208 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2210 * configure.in: pass arg to sqrt.
2212 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2214 * make-dist: Fix May 6 change.
2216 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2218 * vpath.sed: Delete reference to ymakefile.
2220 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2222 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2225 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2227 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2229 * update-subdirs: Specify /bin/sh to run the script.
2231 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2233 * make-dist: Put src/makefile.nt in dist.
2235 * configure.in (i[345]86-*-bsdi2*): New configuration.
2236 (vax-dec-bsd386*): Deleted.
2238 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2240 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2241 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2242 instead of logb in -lm check.
2244 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2246 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2247 Use bsd4-3. Don't set NON_GNU_CPP.
2249 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2250 In nt. copy various different things, but not *.cmd.
2251 Fix the ln commands for the subdirs of nt.
2253 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2255 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2257 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2259 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2260 since that's what the header file expects.
2262 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2264 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2265 and 68040 based machines when choosing options for gnucc.
2267 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2269 * Makefile.in (top_distclean): Delete config.cache.
2271 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2273 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2275 * configure.in: Use m/ncr386.h.
2277 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2279 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2281 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2283 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2284 (man): Don't copy texindex.c and getopt.c; they're deleted.
2285 (etc): Omit `e'; it's a subdirectory.
2286 (etc/e): Use `../..', not `..', to reference top level.
2288 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2290 * Makefile.in (install-arch-indep, dist):
2291 look for `update-subdir' in $(srcdir).
2293 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2295 * make-dist: Include mkinstalldirs in distribution.
2297 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2299 * make-dist: Add missing close backquote.
2301 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2303 * make-dist: Don't distribute shortnames directory.
2305 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2307 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2309 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2311 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2313 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2315 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2317 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2319 * configure.in (mips-sgi-irix6): New configuration.
2321 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2323 * Makefile.in (maintainer-clean): Renamed from realclean.
2325 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2327 * configure.in: Create a .gdbinit that sources the real one, if
2328 using a different build directory.
2330 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2332 * configure.in: Check for sys/select.h.
2334 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2336 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2338 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2340 * configure.in: Handle isc 4.1 operating system.
2342 1994-12-10 Richard Stallman <rms@kepa>
2344 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2345 (rs6000-ibm-aix4*): New alternative.
2347 1994-12-06 Richard Stallman <rms@kepa>
2349 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2351 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2353 * configure.in: Don't try to make directories that are guaranteed
2356 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2358 * configure.in: Generate man/Makefile from man/Makefile.in.
2359 Create the man subdir.
2361 * Makefile.in (dvi): Run Make in our man subdir.
2363 * make-dist: Create subdir etc/e.
2365 Put man/Makefile.in in dist, instead of man/Makefile.
2367 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2369 * configure.in: Add --with-pop, --with-kerberos, and
2370 --with-hesiod for movemail.
2372 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2374 * configure.in (m68*-apollo*): Use s/domain.h.
2376 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2378 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2380 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2382 * configure.in: Don't add -I, -L, -R options for cc if their
2383 arguments would be empty.
2385 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2387 * configure.in (i860-intel-osf1*): New alternative.
2388 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2389 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2391 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2393 * configure.in: Make h_errno check not use nested functions.
2395 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2397 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2399 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2401 * Makefile.in (install-arch-indep): Avoid continued comment
2402 swallowing target line.
2404 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2406 * configure.in: Protect a character class with `changequote'.
2408 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2410 * configure.in: Accept `news' as a synonym for `newsos'.
2412 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2414 * Makefile.in: Don't rm files if cd fails.
2416 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2418 * make-dist: Put nt subdir and its subdirs in the dist.
2419 (lib-src): Put makefile.nt in the dist.
2420 (lisp): Put makefile.nt in the dist.
2422 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2424 * configure.in: Change a stray `[' to `test'.
2426 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2428 * configure.in: Adapt for Autoconf v2. Use the standard argument
2429 parser, host type canonicalizer, X11 finder, and message
2430 printing macros. Use the new macro names. Use `test' instead of `['.
2432 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2434 * configure.in: Check for getpagesize.
2436 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2438 * make-dist (msdos): Put sed* in the distribution.
2440 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2442 * config.bat: New option, `--with-x', for configuring Emacs
2443 for use with the X11 system DesqView/X.
2444 New option, `--no-debug', for compiling Emacs without debug
2445 information thus saving disk space.
2446 (src/config.h, src/paths.h): Use `update' (which is like
2447 `move-if-changed') to change the file.
2448 (src/config.h): When configuring for X11 perform extra changes.
2449 (src/makefile): When configuring for X11 perform extra changes.
2450 (lib-src): Remove temporary files.
2451 (): Check that `sed', `rm', `mv', and `gcc' are available.
2453 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2455 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2457 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2459 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2461 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2463 * configure.in (canonical): Substitute var into makefiles.
2464 (bitmapdir): Likewise.
2466 * Makefile.in (bitmapdir): New variable.
2467 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2469 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2471 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2473 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2474 * update-subdirs: New shell script.
2476 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2478 * Makefile.in (top_distclean): Don't rm build-install.
2479 (SOURCES): Delete build-install.in.
2481 * make-dist: Don't distribute build-ins.in.
2482 * build-ins.in: File deleted.
2484 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2486 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2488 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2490 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2492 * configure.in (libexecdir): Renamed from libdir. New default.
2493 (sharedstatedir): Renamed from statedir. New default.
2494 (datadir): New default.
2496 * make-dist: Don't distribute subdirs.el.
2498 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2500 * configure.in (eaccess): Check for it.
2502 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2504 * configure.in (mktime): Check for it.
2506 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2508 * configure.in (motif): Add support for usage and option checking.
2510 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2512 * configure.in (utimes): Check for it.
2514 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2516 * Makefile.in (install-arch-indep): Don't do mkdir here.
2518 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2520 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2521 riscix.h renamed to acorn.h.
2523 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2525 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2528 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2530 * configure.in: Remove trailing slashes from srcdir.
2532 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2534 * configure.in (i[345]86-sequent-ptx*): Handle
2536 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2538 * Makefile.in (paths-force): Depend on src/paths.h
2540 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2542 * configure.in (config_options): Save all arguments, not just some.
2544 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2546 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2548 * configure.in: Add AC_AIX.
2549 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2551 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2553 * configure.in (parsing options): Simplify sed command to delete -'s.
2555 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2557 * configure.in (config_options): New shell variable.
2558 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2560 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2562 * configure.in (alpha-dec-osf*): New target.
2564 * Makefile.in: Use just one FRC target.
2566 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2568 * Makefile.in (removenullpaths, paths-force):
2569 Use name paths.h.tmp$$, which depends on the pid.
2571 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2573 * Makefile.in (removenullpaths, paths-force):
2574 Put paths.h.tmp in top-level dir, not in src.
2576 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2578 * Version 19.27 released.
2580 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2582 * Version 19.26 released.
2584 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2586 * configure.in: Check for lrand48, not rand48.
2588 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2590 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2591 (powerpc-ibm-aix*): New aliases.
2593 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2595 * make-dist (src/m, src/s): Put *.inp in distribution.
2597 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2599 * configure.in: Accept i586 and i486 along with i386.
2601 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2603 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2604 even if CPP env var was set by the user.
2606 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2608 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2610 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2612 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2614 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2616 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2618 * configure.in: Check more specifically for i*86-sun-sunos.
2620 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2622 * configure.in: Handle solaris 2.4.
2624 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2626 * configure.in (rand48): Check for it.
2628 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2630 * make-dist: Update the info files.
2632 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2634 * configure.in: Make "checking..." messages' style consistent.
2635 (HAVE_H_ERRNO): New test.
2637 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2639 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2641 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2643 * configure.in (CFLAGS): If the envvar was specified, use that.
2644 And set REAL_CFLAGS from it too.
2646 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2648 * make-dist: Update finder-inf.el.
2650 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2652 * make-dist (msdos): Include sed4.inp in dist.
2654 * Makefile.in (libsrc_libs): Var deleted.
2656 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2658 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2660 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2662 * configure.in (mips-sony-newsos4*): New alias.
2664 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2666 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2667 (*-convex-convexos*): Accept this as alias.
2669 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2671 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2672 for two different uses.
2674 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2676 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2678 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2680 * make-dist: Put ./BUGS into the distrib.
2682 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2684 * configure.in: Handle 386 running Solaris 2.
2686 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2688 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2690 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2692 * configure.in (mips-sony-newsos*): Use news-risc.h.
2694 * configure.in: Accept bsdi as opsys, like bsd386.
2696 1994-06-01 Morten Welinder (terra@diku.dk)
2698 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2700 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2702 * Version 19.25 released.
2704 * make-dist (shortversion): Don't assume another period follows.
2706 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2708 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2709 (uninstall): Use /bin/pwd.
2711 * Makefile.in (blessmail): Depend on src.
2712 (all): Don't depend on blessmail.
2714 * Makefile.in (src/paths.h): Don't force recomputation.
2715 (paths-force): New target; force recomputation of paths.h.
2716 (all): Depend on paths-force.
2717 (src, lib-src): Depend on src/paths.h.
2719 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2720 NON_GCC_TEST_OPTIONS.
2722 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2724 * configure.in: Don't insist on subversions for irix.
2726 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2728 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2730 * configure.in (i[34]86-next-*): New alternative.
2732 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2734 * Version 19.24 released.
2736 * configure.in: New config hppa*-hp-hpux9shr*.
2738 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2740 * config.bat: Doc fix.
2742 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2744 * Makefile.in (mostlyclean, clean, distclean, realclean)
2745 (extraclean): Don't act on man subdir if it doesn't exist.
2747 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2749 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2750 Use them to set up CC.
2751 (*-sun-sunos4.1.3): Set them.
2753 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2755 * Makefile.in (lib-src): Don't depend on src/paths.h.
2757 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2759 * build-ins.in (copydests): Get rid of spurious `-'s.
2761 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2763 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2765 * Version 19.23 released.
2767 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2768 for the Xlib and Xt checks; then restore old CFLAGS.
2770 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2772 * configure.in (HAVE_X11XTR6): Add newline before #if.
2773 Add newline after #endif.
2775 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2777 * configure.in (HAVE_X11XTR6): Arrange to define it.
2779 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2781 * Makefile.in (install): Depend on blessmail.
2783 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2785 * configure.in (mips-siemens-sysv*): Put quotes around value
2788 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2790 * Makefile.in (TAGS): Use the makefile in src subdir.
2792 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2794 * configure.in (opsys): Recognize `gnu'.
2796 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2798 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2800 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2802 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2805 1994-05-08 Morten Welinder (terra@diku.dk)
2807 * config.bat: Forcibly remove "# " style comments from makefiles.
2809 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2811 * Makefile.in (uninstall): When processing lispdir and etcdir,
2812 do nothing unless it exists and is a directory.
2814 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2816 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2817 Merge code in from install-doc.
2818 (install-doc): Merge code back into install-arch-indep.
2819 (install-arch-dep): Don't depend on install-doc.
2821 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2823 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2825 * configure.in (making src/Makefile and lib-src/Makefile):
2826 Split off the autoconf substitutions and don't pass them thru cpp.
2827 (undefs): Use $canonical as well as $configuration.
2829 * make-dist: Distribute lisp/Makefile.
2831 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2832 Use lower case names for the s files.
2834 1994-05-03 Morten Welinder (terra@diku.dk)
2836 * config.bat: Added possibility for different file name
2837 transscriptions in lib-src.
2839 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2841 * Makefile.in (lib-src): Undo previous change.
2842 (blessmail): New target to run maybe-blessmail in lib-src.
2843 (all): Depend on blessmail.
2845 * Makefile.in (lib-src): Depend on src.
2847 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2849 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2850 (m88k-dg-dgux5.4R2): dgux5.4R2.
2852 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2854 * configure.in (window_system): Restore accidentally deleted code
2855 that uses AC_FIND_X.
2857 * make-dist: Distribute config.bat.
2859 1994-04-29 Morten Welinder (terra@diku.dk)
2861 * config.bat: Corrected the configuration of lib-src
2862 to keep up with configure. Add note about dos version 3
2863 or better needed (djgpp needs that). Add note explaining
2864 that either install in c:/emacs or edit the script.
2865 Don't change to c:/emacs, but assume we're there (to minimize
2866 the number of places to change).
2868 * config.bat: Build-in the first step towards X11 support with
2869 the X11 emulator that exists. At this time it won't work,
2870 and several files are missing.
2872 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2874 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2875 Don't look for -lresolv.
2877 * Makefile.in (lib-src): Depend on src/paths.h.
2879 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2881 * configure.in: Restore deleted AC_SUBST of `configuration'.
2882 Improve error message for bad --with-x-toolkit value.
2884 * configure.in: Define CONFIGURATION in src/config.h
2885 rather than substituting in src/Makefile.in.
2887 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2889 * Makefile.in (install-doc): New target.
2890 (install-arch-dep): Depend on install-doc.
2891 (mkdir): Create docdir.
2893 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2895 * configure.in: Test for libresolv.a.
2896 Substitute machfile and opsysfile.
2898 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2900 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
2901 (install-arch-dep): Install under the name $(EMACS).
2903 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2905 * configure.in (version): Use entire value of emacs-version.
2906 (mips-siemens-sysv*): New alternative.
2908 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2910 * Makefile.in (install-arch-indep): Don't install dired-x*.
2912 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2914 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
2915 Fix definition of $undefs.
2917 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2919 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
2921 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
2923 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2925 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
2927 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2929 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
2930 and run it thru cpp, as with src/Makefile.in.
2932 * configure.in: Use AC_SET_MAKE.
2934 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2936 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
2938 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2940 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
2942 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
2943 (printing the choices): Make the toolkit message unconditional.
2944 (USE_X_TOOLKIT): Use `none', not `no', if none.
2945 (include libsrc_libs): Include config.h, and specify -I for srcdir.
2946 Get rid of temp file foofoo1.
2948 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2950 * configure.in (CFLAGS): Use shell syntax, not Makefile.
2952 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2954 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
2955 (printing the choices): State choice of toolkit.
2956 (libsrc_libs): Recalculate after writing config.h;
2957 then update lib-src/Makefile.
2959 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2961 * configure.in: Add sunos4shr as alternative for suns.
2962 Conditionals testing for null $CC were backwards.
2964 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2966 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
2968 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2970 * configure.in: Handle -isc4.0*.
2972 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2974 * configure.in (esix5): Set NON_GNU_CPP.
2976 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
2978 * Makefile.in (thisdir): Nonsensical variable removed.
2979 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
2980 back to $thisdir, rather than the directory `this_dir'.
2982 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2984 * Makefile.in (install-arch-indep): Add missing backslash after a
2987 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2989 * Makefile.in (thisdir): New variable.
2990 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
2992 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2994 * configure.in: Add freebsd.
2996 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2998 * configure.in: Check for fpathconf.
3000 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3002 * configure.in (with_x_toolkit): Fix typo in previous change.
3004 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3006 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
3008 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3010 * configure.in (with_x_toolkit): Don't allow motif or open-look.
3012 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3014 * configure.in: Fix value of docdir.
3015 * Makefile.in (install-arch-indep): Install DOC* in docdir.
3017 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3019 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
3021 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
3023 * configure.in: New variable docdir to control where the docstring
3025 Makefile.in: Use it to initialize PATH_DOC in paths.h.
3027 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3029 * configure.in: When --run-in-place, don't inherit archlibdir.
3031 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3033 * Makefile.in (install-arch-dep, install-arch-indep):
3034 New targets split up former do-install rule.
3035 (do-install): Target deleted.
3037 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3039 * configure.in (mips-sony-newsos*): New configuration.
3041 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
3043 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
3045 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3047 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
3049 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3051 * configure.in: Don't initialize CC.
3053 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3055 * configure.in (creating src/Makefile): Also generate -U switches
3056 for symbols in the $configuration value.
3058 * configure.in: Check for sys_siglist being declared in system header.
3060 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3062 * configure.in (creating src/Makefile): Delete blank lines
3063 along with lines of whitespace.
3064 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
3066 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3068 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
3069 like C_SWITCH_SYSTEM.
3070 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
3072 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3074 * configure.in (drem): Check for this function.
3076 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3078 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
3079 If CPP was inherited from environment, don't use NON_GNU_CPP.
3080 (NON_GNU_CC): Likewise.
3081 (handling with_gcc): Use explicit if in the `no' case.
3082 (cc_specified): New variable; if set, don't use NON_GNU_CC.
3084 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3086 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
3088 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3090 * configure.in: Check whether fmod exists.
3092 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3094 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
3095 {src,lisp}/OChangeLog.
3097 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3099 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
3100 necessary for proper operation. This code works with the current
3101 released version of Autoconf.
3103 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3105 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
3106 (USE_X_TOOLKIT): Define it for all values except `no'.
3108 * configure.in: Undo first Jan 8 change and Jan 16 change.
3110 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3112 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
3113 Substitute USE_X_TOOLKIT as both C macro and Make variable.
3115 * Makefile.in (lwlib/Makefile): New target.
3116 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
3117 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
3118 (unlock, relock): Handle lwlib subdir.
3120 * Makefile.in: Add some .PHONY targets.
3122 * make-dist: Handle lwlib subdir like oldXMenu subdir.
3124 * lwlib: New subdirectory.
3126 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3128 * configure.in: If CPP has a value that is a directory,
3131 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3133 * configure.in (srcdir_undefs): Add g flag to sed substitution to
3136 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3138 * Makefile.in (do-install): Install the dired-x info files.
3140 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3143 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3145 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3147 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3149 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3150 AC_OUTPUT as it should be; hopefully noone will again see fit to
3151 gratuitously break this and not make a change log entry.
3152 Optimized sed processing of Makefile.in and cpp output; now
3153 preserves comments previously removed from the cpp input.
3154 Eliminated temp file for cpp output. Generate -U switches to
3155 undefine all identifiers that appear in the directory name
3156 ${srcdir}; pass these to cpp.
3158 * configure.in (version): Fix sed regexp to match two-elt version
3161 * configure.in: Check for strerror.
3163 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3165 * configure.in: Test for bcmp.
3167 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3169 * make-dist (tempdir): Put subdir msdos into the distribution.
3171 1993-01-07 Morten Welinder (terra@diku.dk)
3173 * config.bat: New file.
3175 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3177 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3179 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3181 * configure.in (m68*-next-*): Don't care about which os is specified.
3182 (i[34]86-*-*): Check for *-nextstop*.
3184 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3186 * configure.in: Check for setsid.
3188 1993-12-17 Richard Stallman (rms@srarc2)
3190 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3192 1993-12-15 Richard Stallman (rms@srarc2)
3194 * Makefile.in (mkdir): Make only the lockdir writable.
3196 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3198 1993-12-11 Richard Stallman (rms@srarc2)
3200 * Makefile.in (libdir): Use @libdir@.
3202 1993-12-08 Richard Stallman (rms@srarc2)
3204 * Makefile.in (install): Add empty command.
3206 1993-12-04 Richard Stallman (rms@srarc2)
3208 * make-dist: Put man/getopt.c in the dist.
3210 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3212 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3214 1993-12-03 Richard Stallman (rms@srarc2)
3216 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3217 Set it for all solaris versions.
3218 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3219 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3220 Likewise for NON_GNU_CC and CC.
3222 1993-12-01 Richard Stallman (rms@srarc2)
3224 * configure.in (mips-mips-riscos4*): Assign variable CC.
3225 (checking ${with_gcc}): If "no", don't override CC if already set.
3226 (CC): Initialize it as empty.
3228 1993-11-30 Richard Stallman (rms at srarc2)
3230 * configure.in (Suns): Set CPP if *-solaris2.3*.
3232 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3234 * Version 19.22 released.
3236 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3238 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3240 * make-dist: When breaking links, use cp -p.
3241 Copy install.sh into distribution.
3242 Move the temp dir up into the parent dir;
3243 don't leave the staging dir make-dist.tmp... in existence.
3244 * install.sh: New file.
3246 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3248 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3250 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3252 * configure.in (version): When --run-in-place, exclude
3253 ${datadir}/emacs/site-lisp from locallisppath.
3255 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3257 * configure.in: Delete jumk.c before writing it.
3259 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3261 * Version 19.21 released.
3263 * Makefile.in (mkdir): Ignore error from chmod.
3265 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3267 * make-dist: Don't put lisp/forms.README in the distribution.
3269 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3271 * configure.in (creating src/Makefile): Before running cpp,
3272 discard all lines that start with `# Generated' or /**/#.
3274 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3276 * Version 19.20 released.
3278 * make-dist: Use build-ins.in, not build-install.in.
3279 Don't bother updating TAGS since it's not included.
3281 * build-ins.in: Renamed from build-install.in.
3283 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3285 * make-dist: Don't try to link *.texinfo--there are none now.
3286 When running make in lib-src, specify YACC var value.
3288 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3290 * configure.in (extrasub): Add vpath patterns for %.[yls].
3292 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3293 Instead just include the commands to make src/Makefile as the
3294 second arg to AC_OUTPUT.
3296 * configure.in: Use : instead of dnl for comment inside
3299 * configure.in: No longer use vpath_sed. Instead, when we notice
3300 srcdir already configured, set extrasub to hack vpath in the
3303 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3305 * Makefile.in (VPATH): Define to @srcdir@.
3307 1993-09-28 Brian Fox (bfox@cubit)
3309 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3310 doesn't exist. Just copy src/Makefile.in instead. Touch
3311 all of the Makefiles after editing config.status.
3313 * INSTALL: Update documentation to match new configuration
3316 1993-09-27 Brian Fox (bfox@ai.mit.edu)
3318 * configure.in: Allow any of the path or directory Makefile
3319 variables to be set with flags to configure. Create all Makefiles
3320 at configure time. Edit special commands into config.status after
3321 src/Makefile.in is built from src/Makefile.
3323 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3324 If these files are out of date, simply have config.status
3325 rebuild them; don't rebuild them explicitly.
3327 1993-09-25 Brian Fox (bfox@ai.mit.edu)
3329 * build-install.in: Change src/xemacs to src/emacs. We no longer
3330 create src/xemacs, so the file wouldn't be found.
3332 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3334 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3336 * configure.in: Avoid forcing the search of /usr/include before
3337 fixed include files by resetting C_SWITCH_X_SITE if it is
3340 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3342 * Makefile.in (@rip_paths@locallisppath):
3343 Delete ${datadir}/emacs/site-lisp.
3345 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3348 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3349 Remove ${extra_output} from AC_OUTPUT call.
3351 1993-09-17 Brian Fox (bfox@inferno)
3353 * make-dist: Quote backquotes found in strings to be echoed.
3355 * configure.in: Use "sh -c pwd" when we want to avoid having the
3356 shell fix up the value of $PWD.
3358 1993-09-13 Brian Fox (bfox@inferno)
3360 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3361 of the installation fail. Suggested by Karl Berry.
3363 1993-08-30 Brian Fox (bfox@inferno)
3365 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3366 was used. Set MAKEFLAGS from MFLAGS.
3368 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3370 * configure.in: Test for res_init in libc.
3372 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3374 * configure.in: In the file ${tempcname}, use configure___
3375 instead of @configure@.
3377 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3379 * make-dist: Dist vpath.sed
3381 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3382 Depend on vpath.sed.
3383 Replace sed comand for VPATH with @vpath_sed@.
3385 * configure.in: Substitute variable `vpath_sed'.
3386 If not in $srcdir and $srcdir is configured,
3387 issue warning that GNU make is required,
3388 and set vpath_sed to use vpath.sed script.
3390 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3392 * configure.in: Remove check for $srcdir being configured. This
3393 pretty much works now.
3394 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3395 Check for XFree86 (/usr/X386/include) independent of whether
3398 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3399 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3402 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3404 * Version 19.19 released.
3406 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3408 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3410 * configure.in: Check for XScreenNumberOfScreen.
3412 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3414 * configure.in: Add * to end of all configuration alternatives.
3415 (m68*-sony-newsos3*): New alternative.
3417 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3419 * make-dist: Include getdate.c in distribution.
3421 * configure.in: For --help, use $PAGER if it is set.
3422 (LIB_X11_LIB): Default to -lX11.
3423 (mips-sgi-irix5.*): New alternative.
3425 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3427 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3428 Recognize *.B8.* as hpux version 8.
3429 (m68*-tektronix-bsd*): Fix typo in tek4300.
3430 (AC_HAVE_FUNCS): Add ftime.
3432 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3434 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3435 Use tekxd88, not tekXD88.
3437 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3439 * configure.in: Check for -lm. Then can check for frexp and logb.
3441 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3443 * Version 19.18 released.
3445 * make-dist (src): Don't put gnu-hp300 in dist.
3446 (src, lisp): Include OChangeLog in dist.
3448 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3450 * configure.in: Test for presence of logb and frexp functions.
3452 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3454 * configure.in (machine): Add i370-ibm-aix*.
3456 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3458 * configure.in (function checks): Test for mkdir and rmdir.
3460 * configure.in (function checks): Don't test for random and bcopy
3461 only when we're building with X; look for them all the time.
3463 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3465 * configure.in: Test for availability of bcopy functions, searching
3466 the X libraries if we're using X.
3468 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3469 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3470 versions of AIX, and needs to be passed to the loader.
3472 * configure.in: Test for the availablility of the
3473 XScreenResourceString function.
3475 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3477 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3478 LD_SWITCH_X_SITE and assume --with-x11.
3479 Only look for X11 files if we weren't told about a window system
3480 or if we were told to use X11 but not told where.
3481 Search the libraries from the s and/or m files when checking for
3484 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3486 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3488 * make-dist: Include lisp/dired.todo in the distribution.
3490 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3492 * configure.in: Add code to set HAVE_INET_SOCKETS.
3494 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3496 * configure.in: If we do find x_includes and x_libraries
3497 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3499 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3501 * make-dist: Include src/gnu-hp300 in the dist.
3503 * configure.in (canonical): New variable holds the canonicalized
3504 configuration. Don't alter `configuration'. Use `configuration'
3505 for Makefile.in for file naming.
3506 (testing x_includes and x_libraries): Use =, not ==.
3508 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3510 * Version 19.17 released.
3512 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3513 directory's makefile. This allows the invocation of CPP which
3514 builds xmakefile to receive these switches. The SunSoft C
3515 preprocessor inserts spaces between tokens if it doesn't get the
3516 -Xs flag requested in src/s/sol2.h.
3518 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3520 * configure.in (m68k-bull-sysv3): new config.
3522 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3524 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3525 the X Windows libraries.
3527 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3529 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3530 the distribution. Those files aren't kept in their own
3531 subdirectory any more.
3533 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3535 * Version 19.16 released.
3537 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3539 * configure.in: Add --verbose flag.
3541 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3543 * version 19.15 released.
3545 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3547 * Makefile.in (top_distclean): Use -f switch when cleaning out
3548 lock dir; it might be empty.
3550 * configure.in: Only check for -lXbsd once.
3552 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3554 * Version 19.14 released.
3556 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3558 * make-dist: If using gzip, create distribution with '.gz' extension.
3560 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3561 (lisp/forms-mode): This doesn't exist anymore.
3563 * configure.in: Look for the closedir function.
3565 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3567 * configure.in (CPP): Autoconf sets this to a shell variable
3568 reference, which doesn't work when it's edited into a makefile.
3569 Expand that variable reference.
3571 * Makefile.in (CPP): New variable.
3572 (src/Makefile): Edit CPP into src/Makefile.
3574 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3575 and entering double quotes to get the values of LD_SWITCH_X_SITE
3576 and the other make variables; make substitutes them in anyway.
3578 * Makefile.in (uninstall): Don't remove the lisp and etc
3579 directories if they're in the source tree.
3581 Bring mumbleclean targets into conformance with GNU coding standards.
3582 * Makefile.in (mostlyclean, clean): Separate these two; just have
3583 them pass the request to the subdirectory makefiles.
3584 (distclean): Pass the request down, and then get rid of the
3585 files configure built, and get rid of the Makefiles.
3586 (realclean): Pass the request down, and then do the same things
3588 (uninstall, info, dvi): New targets.
3590 * configure.in: Move clause for PC-compatible i386 box to the end
3591 of the case statement, to avoid masking configurations below.
3593 * configure.in: Add case for m88k-motorola-sysv4.
3595 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3596 the HP 68000 machines.
3598 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3599 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3600 preprocessor won't fiddle with them.
3602 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3604 * Makefile.in (TAGS): cd to src to run etags.
3606 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3608 * configure.in (version): Check the X libraries for XrmSetDatabase
3609 and random, and see if we have -lXbsd.
3611 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3613 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3614 s/*.h and m/*.h files. Martin Tomes
3615 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3617 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3619 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3620 above the general i386 alternative.
3622 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3624 * configure.in: Recognize configuration name for Data General
3627 * configure.in: Use AC_LONG_FILE_NAMES.
3629 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3631 * configure.in: Test for bison.
3632 * Makefile.in (YACC): New variable.
3633 (lib-src/Makefile.in): Edit YACC into the makefile.
3635 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3637 * Version 19.13 released.
3639 * configure.in (CFLAGS): Don't set this according to the value of
3640 the GCC shell variable. Instead, consult the machine and system
3641 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3642 test __GNUC__ while we're at it.
3644 * configure.in: Remove extra ;; from hpux cases.
3646 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3648 * configure.in: Check to see if the system has -ldnet.
3650 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3652 * make-dist: Add clauses to distribute lisp/forms-mode.
3654 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3656 * configure.in (machine): Fix the versions in hpux version number test.
3657 Do not guess based on cpu type. Do check for explicit system version.
3659 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3661 * configure.in: Do NOT look for `unknown' as company name.
3663 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3665 * configure.in: Fix typo in message.
3667 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3669 * Version 19.12 released.
3671 * Makefile.in (do-install): Correct previous etc-copying change.
3672 Partially rewrite using `if'.
3673 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3675 * Version 19.11 released.
3677 * configure.in: Handle 386bsd.
3679 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3681 * make-dist: Update getdate.c.
3683 * configure.in: Handle bsd386.
3685 * Makefile.in (do-install): Use `-' in tar options.
3687 * configure.in: Change ! "${...}" to x"${...}" = x.
3689 * Makefile.in (do-install): Copy the DOC-* files from the build
3690 etc directory, as well as lots of things from ${srcdir}/etc.
3692 * make-dist: Copy config.guess.
3694 * configure.in: Handle AIX versions 1.2, 1.3.
3696 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3698 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3699 the configuration name mips-mips-usg* to represent USG systems.
3701 * configure.in: Fix logic to detect if srcdir is already configured.
3703 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3705 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3706 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3707 of a directory; cd might fail, and have pwd print out the current
3710 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3712 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3714 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3716 * configure.in: Complain if srcdir points at an already-configured
3719 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3721 * Version 19.10 released.
3723 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3725 * Makefile.in: Use Makefile comments, not C comments.
3727 * configure.in: Add case for the Tektronix XD88.
3729 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3731 * configure.in: Handle sysv4.2 and sysvr4.2.
3733 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3735 * configure.in: Traverse the argument list without destroying it;
3736 don't use shift. It turns out that "set - ${saved_arguments}"
3737 doesn't work portably.
3739 * configure.in: Add missing "fi".
3741 * make-dist: Rebuild configure if configure.in is newer.
3743 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3744 targets to be executed even if make remembers that it has already
3747 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3749 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3751 * configure.in (romp): Handle various version numbers with aos and bsd.
3753 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3755 * configure.in: Fix message text.
3757 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3759 * make-dist: Make a `site-lisp' directory in the distribution,
3760 instead of a `local-lisp' directory, which hasn't been the
3761 appropriate name for a long time.
3762 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3763 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3765 * Makefile.in (do-install): Correctly detect if ./etc and
3766 ${srcdir}/etc are the same.
3768 * configure.in: Extract UNEXEC from the system configuration
3769 files, compute the name of the source file corresponding to the
3770 object file, and #define it as UNEXEC_SRC in config.h.
3772 * configure.in: If srcdir is '.', then try using PWD to make it
3775 * configure.in: Include ${srcdir} in the printed report, to help
3776 people notice if it's an automounter path.
3778 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3780 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3782 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3784 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3785 when they are different. Add `shift' command.
3786 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3787 (externallispdir): Var deleted.
3789 * configure.in: Delete spurious paren outputting short_usage.
3791 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3793 * Version 19.9 released.
3795 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3797 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3800 * make-dist: Check for .elc files with no corresponding .el file.
3802 * Makefile.in (mkdir): Make all the directories in locallisppath.
3804 * config.guess: New file.
3805 * configure.in: Use it, tentatively.
3806 * INSTNALL: Mention its usage.
3808 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3809 the former gives you the operating system rev directly. Use
3810 s/hpux.h if we don't recognize what we got.
3812 * Makefile.in (do-install): Don't remove a destination directory
3813 if it's the same as the source. If ${srcdir}/info == ${infodir},
3814 don't try to copy the info files.
3816 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3817 doesn't work if you're not using a separate source directory.
3818 (do-install): Copy the build tree's etc directory only after
3819 making sure it's not also the source tree's etc directory.
3821 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3823 * configure.in: Handle sunos4.1.3 specially.
3825 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3827 * Makefile.in (INSTALL): Add definition.
3829 * configure.in: Fix some messages. Support -with-gnu-cc.
3830 At the end, use `set --', not `set -'.
3831 Delete spurious `.h' in hpux alternatives.
3833 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3835 * Version 19.8 released.
3837 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3839 * configure.in: When looking for source in the same directory as
3840 the configure script, make the path thus discovered absolute.
3841 If the user specifies the `--srcdir' switch, make that directory
3844 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3846 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3847 too, as the value of the PATH_INFO macro.
3849 * configure.in: Check to see if the source lives in the same
3850 directory as the configure script.
3852 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3854 * Makefile.in (install): Split this into `install' and
3855 `do-install', to give people more control over exactly what gets
3857 (do-install): New target, containing the guts of `install'. Don't
3858 remove and recreate the directories inside the copying loop - do
3859 it all before the copying loop. Pass more flags to the lib-src
3861 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3862 avoid errors and warnings.
3864 * configure.in: For generic IBM PC boxes, insist on "unknown" for
3865 the manufacturer - the more general case was blocking other i386
3866 configuration names below, and that's how the names are written in
3869 * make-dist: When breaking links, remove the link before moving
3870 the copy onto it, to avoid interactive behavior.
3872 * Makefile.in: Doc fix.
3874 * configure.in: Doc fix.
3876 * INSTALL: Mention --exec-prefix option.
3878 * configure.in: Add support for the `--exec-prefix' option.
3879 * Makefile.in: Accept that support.
3881 * configure.in: Use the AC_PROG_INSTALL macro.
3882 * Makefile.in (INSTALL): Variable removed.
3883 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
3885 * configure.in: Distinguish between hp800's and hp700's by calling
3888 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3890 * configure.in: Recognize configuration names for i860 boxes
3893 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3895 * configure.in: Distinguish between hp800's and hp700's by the
3896 version of HP/UX they run, since that's something people are more
3897 likely to know - hp700's run 8.0.
3898 Add HP 700 configuration.
3900 * configure.in: Test for the presence of the `rename' function.
3902 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
3904 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
3906 * make-dist: Break intra-tree links.
3908 * configure.in: Explain that this is an autoconf script, and give
3909 instructions for rebuilding configure from it. Arrange to put
3910 comments in configure explaining this too.
3912 * configure.in: Make the first line of the configure script be
3913 "#!/bin/sh". Leaving the first line blank didn't work.
3915 * configure.in (long_usage): Removed; made short_usage describe
3916 the options briefly.
3918 * configure.in: Implement the --prefix option.
3919 * Makefile.in (prefix): Add support for it here.
3920 * INSTALL: Document it here.
3922 * Makefile.in (install): Don't assume that the files in the `info'
3923 subdirectory match *.info. They don't have that prefix.
3925 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3927 * configure.in: Add case for version 5 of Esix.
3929 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3931 * Version 19.7 released.
3933 * make-dist: There aren't any *.com files in lib-src anymore.
3935 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
3936 them; they're symlinks to other filesystems on the GNU machines.
3938 * make-dist: Check that the manual reflects the same version of
3939 Emacs as stated in lisp/version.el. Edit that version number into
3942 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3944 * configure.in: Remove the hack of AC_DEFINE; use
3947 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3949 * make-dist: Don't distribute precomp.com, compile.com, or
3950 link.com from ./src; they're in ./vms now.
3952 Some time-handling patches from Paul Eggert:
3953 * configure.in: Add AC_TIMEZONE.
3955 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3957 * configure.in: Recognize Linux as a valid operating system for
3960 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3962 * make-dist: Distribute some VMS files we got from Richard Levitte.
3964 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
3965 the source for the sed command, not oldXMenu/Makefile.
3967 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3969 * INSTALL: Don't claim the srcdir option doesn't work.
3971 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3973 * configure.in: Include remarks saying what order the autoconf
3974 tests should go in, and remind people to change config.h.in
3975 whenever they add autoconf tests which make #definitions.
3977 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
3979 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3981 * Makefile.in (oldXMenu/Makefile): Make this depend on
3982 ${srcdir}/oldXMenu/Makefile.in, not itself.
3984 * PROBLEMS: Some updates from David J. Mackenzie.
3986 More changes from David J. Mackenzie.
3987 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
3988 removed; autoconf and config.h should specify all these
3990 (buildlisppath): Make this path depend on ${srcdir}.
3991 (INSTALLFLAGS): Removed.
3992 (INSTALL): Include the -c flag.
3993 (install): Change the way we invoke install accordingly.
3995 Install ${srcdir} changes from DJM.
3996 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
3998 (COPYDIR, COPYDESTS): Install files from both the etc directory in
3999 the source tree and the etc directory in the object tree.
4000 (${SUBDIR}): Pass the prefix variable down to submakes.
4001 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
4003 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
4004 values for srcdir and VPATH.
4005 (install): Add `v' flag to tar command. Make sure that `dir'
4006 exists in ${srcdir}/info before copying it. Remember that the man
4007 pages come from the source tree, not the object tree.
4008 * configure.in: Remove remarks saying that the --srcdir option
4010 Create the etc directory in the object tree.
4011 Recognize configuration names of the form *-sun-solaris*.
4012 Recognize sunos5 and solaris as operating system names.
4014 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
4015 lib-src/getdate.y and src/systime.h.
4017 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4019 * make-dist: Make links in info subdir.
4021 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4023 * configure.in: Call AC_STDC_HEADERS.
4025 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4027 * configure.in: Sidestep autoconf's quoting of the second argument
4028 of AC_DEFINE, so we can specify the value to put there. It would
4029 be nice if autoconf provided some way to specify computed values
4032 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4034 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
4035 this is always just -DHAVE_CONFIG_H.
4037 The GNU coding standards specify that CFLAGS should be left for
4039 * Makefile.in (CFLAGS): Let configure determine the default value
4041 have it default to DEFS.
4042 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
4043 (lib-src/Makefile, src/Makefile): Edit the default value for
4044 CFLAGS into these files, not DEFS.
4045 * configure.in (CFLAGS): Choose a default value for this - "-g"
4046 normally, or "-g -O" if we're using GCC. Edit it into the
4049 * configure.in: When scanning the machine and system description
4050 #include files, write their names to conftest.c properly.
4052 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4054 * configure.in: In configuration name case for Apallos running
4055 Domainios, set opsys, not opsysfile.
4057 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
4058 src/config.h, instead of AC_OUTPUT; the latter overwrites
4059 src/config.h even when it hasn't changed, puts a makefile-style
4060 comment at the top even though it's C code, and produces a
4061 config.status script which doesn't do the job right.
4063 * configure.in: Add AC_LN_S test, so we can tell whether or not we
4064 can use a symbolic link to get the X Menu library into src.
4065 * Makefile.in (LN_S): New variable.
4066 (src/Makefile): Edit the value of LN_S into this makefile.
4068 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4070 * configure.in: Support *-sco3.2v4* as opsystem.
4072 * make-dist: Don't include calc directory.
4073 Exclude many files in the man directory; copy a few.
4075 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4077 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
4078 call AC_STRUCT_TM to see what's in time.h.
4080 * configure.in: Employ quoting stupidity to get the value of CPP
4083 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4085 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
4086 variable to scan the machine and system description files.
4088 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
4089 so that getdate.y builds correctly.
4091 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4093 * configure.in (tempcname): Change this to "conftest.c", so it will
4094 work properly on systems with short filenames; this is the name
4097 * configure.in: Also detect the availability of dup2 and
4100 * configure.in: Use the AC_ALLOCA test.
4101 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
4102 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
4104 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4106 * make-dist: Distribute configure, as well as configure.in.
4109 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4111 * Makefile.in (install): Print out the name of the directory we're
4112 copying, so people can have some idea of whether we're making
4115 * Makefile.in (install.aix, install.xenix, install.sysv, install):
4116 Don't forget to re-create the COPYDESTS directories after we clear
4119 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4121 * Makefile.in: Add autoconf cookies so that the configure
4122 script can comment out sections of path variable definitions to
4123 choose between the installable configuration and the run-in-place
4125 * configure.in: Add new option `--run-in-place', to select the
4126 run-in-place path definitions.
4128 * configure.in: Add a clause to the big configuration name case
4129 for the NeXT machine.
4131 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4133 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4134 Make sure that each source directory exists, and is different from
4135 the destination directory; then, delete the destination before
4136 copying over the source.
4138 * make-dist: Distribute configure.in, instead of configure.
4140 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4142 * configure.in: Don't set CC to "gcc -O" if the user specifies
4143 `--with-gcc'. Add -O to DEFS if GCC is set.
4145 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4147 * Makefile.in (clean mostlyclean): Missing right paren.
4149 * configure.in: When checking for X windows, search for an X11
4150 subdirectory of ${x_includes}.
4152 * configure.in: Check for gettimeofday function, for getdate.y.
4154 Change `configure' to a mixture of custom code and autoconf stuff.
4155 autoconf can't derive all the information we need, but we'd really
4156 like to be able to take advantage of some of its tests, and its
4157 file-editing facilities.
4158 * configure.in: Renamed from configure.
4159 Quote the sections of shell script we want copied literally to
4160 the configure script.
4161 (compile): Initialize this to make the autoconf macros' code happy.
4162 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4163 code to do their jobs.
4164 Use autoconf to produce Makefile and src/config.h.
4165 Remove the Makefile-style comment that autoconf places at the top
4167 (config_h_opts): Removed - no longer necessary.
4168 * Makefile.in (configname): Renamed to configuration.
4169 (CONFIG_CFLAGS): Renamed to DEFS.
4170 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4171 get values via autoload @cookies@.
4172 (libsrc_libs): Get this from autoconf. We used to do nothing
4174 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4176 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4177 echo the move-if-change command.
4179 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4181 * make-dist: Distribute lib-src/rcs-checkin.
4183 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4184 Don't try to make links to the RCS or Old subdirectories.
4185 Use the appropriate extension for the compression type in use.
4186 Create the tar file in the shell's initial default directory, not
4188 Erase the whole ${tempparent} tree, not just ${tempdir}.
4190 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4192 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4193 use to build paths.h.
4194 (lib-src/Makefile, src/Makefile): Similarly.
4196 * configure: Extend test for working `const' keyword to handle AIX
4199 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4201 * make-dist: Distribute lisp/term/ChangeLog.
4203 Arrange for C compilation throughout the tree to get
4204 C_SWITCH_SYSTEM from the configuration files.
4205 * configure: Extract C_SWITCH_SYSTEM from the machine and
4206 system-dependent files, and save it in the top-level Makefile.
4207 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4208 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4210 * make-dist: Include the VMS support files in oldXMenu in the
4213 * configure: Doc fix.
4215 * configure: Fix corrupted config_h_opts.
4217 * configure: Properly report option names in error messages.
4219 * configure: Properly recognize --x-includes and --x-libraries
4222 * configure: Fix syntax errors in code handling XFree386.
4224 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4226 * configure: Add special code to detect XFree386, and tell
4229 * configure: Properly handle extracting values of LIBS_MACHINE and
4230 LIBS_SYSTEM that contain spaces.
4232 * configure: Add `--x-includes' and `--x-libraries' options. I
4233 think these are dopey, but no less than three alpha testers, at
4234 large sites, have said they have their X files installed in odd
4235 places. Implement them by setting C_SWITCH_X_SITE and
4236 LD_SWITCH_X_SITE in src/config.h.
4238 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4240 * make-dist: Don't distribute etc/Old files.
4242 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4245 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4247 * make-dist: Fix typo.
4249 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4251 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4252 in some cases where it should but didn't seen to.
4254 * Makefile.in: Added unlock and relock productions.
4256 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4258 * make-dist: Add a --compress option to force make-dist to use
4261 * make-dist: Use gzip, if we can find it.
4263 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4264 make rs6000-ibm-aix default to -aix32.
4266 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4268 * Makefile.in: Added `Developer's configuration' section.
4270 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4272 * Makefile.in: Add commented-out variable settings for developer's
4275 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4277 * make-dist: Distribute `src/bitmaps' too.
4279 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4281 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4282 make rs6000-ibm-aix default to -aix32.
4284 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4286 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4288 * Makefile.in (install.sysv): Add a second `$' in front of
4289 `${dest}', so that the shell will expand it, instead of Make.
4291 * configure: When processing the name of the configure script,
4292 collapse `././' to `./', but leave a single `./' prefix alone.
4294 * configure: Doc fix.
4296 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4298 * configure: Handle isc3.0 correctly.
4300 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4302 * make-dist: Don't try to copy the COPYING notice into
4303 external-lisp; we're not distributing that directory any more.
4305 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4307 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4308 Remove CVS subdirectories from the installed directory trees, as
4309 well as RCS directories.
4311 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4313 * make-dist: Only copy gmalloc.c if we couldn't link it.
4314 Don't try to copy man/{README,Makefile} unless they actually exist.
4316 * Makefile.in (lisppath): Don't include externallispdir in this.
4317 We're not sure whether we're even going to distribute the
4320 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4322 * make-dist: Don't distribute the external-lisp directory anymore.
4323 * INSTALL: Remove all references to external-lisp.
4325 * configure: Detect whether the compiler supports `const'
4326 properly, and edit src/config.h accordingly.
4328 * configure: Tweak layout of final report.
4330 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4333 * Makefile.in (locallisppath): Make this default to
4334 ${datadir}/emacs/site-lisp, instead of
4335 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4336 the same thing, and local-lisp causes completion conflicts with
4338 (lisppath): Add ${externallispdir} to this.
4339 * INSTALL: Adjust installation directions.
4341 * Makefile.in (externallispdir): New variable, to say where to
4342 install the externally-maintained lisp files.
4343 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4345 * INSTALL: Describe external-lisp and the new externallispdir
4348 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4350 * configure (progname): New option `--with-gcc'. Make it clearer
4351 how we are trying to guess whether or not we have GCC.
4352 * INSTALL: Document the `--with-gcc' option, and improve
4353 description of `--with-x' options.
4355 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4357 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4358 ${infodir} from these variables; we have written out explicit code
4359 to install the info files.
4361 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4363 * make-dist: Don't distributed the RCS files in the etc directory.
4365 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4367 * Makefile.in: Some makes can't handle comments in the middle of
4368 commands; move them to before the whole rule.
4370 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4372 * README: Mention what Emacs is.
4374 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4376 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4377 Add `./cpp' and `./man' back into the distribution.
4379 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4381 * Makefile.in: Define MAKE, and use where appropriate.
4383 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4385 * make-dist: Remember that the authoritative COPYING notice is
4386 `etc/COPYING', not `../etc/COPYING'.
4388 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4390 * make-dist: Make sure that the COPYING notices in each directory
4391 are copies, not symlinks.
4393 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4395 * INSTALL: The build process produces an executable called `emacs'
4396 now. Change references.
4397 * Makefile.in: Adjust `install.mumble' targets to install
4398 `src/emacs', not `src/xemacs'.
4400 * configure: Start with a blank line; this keeps some old CSH's
4401 from thinking it's a CSH script. Most systems will just use
4402 /bin/sh to run it, which is what we're expecting; the only other
4403 shells which might try to interpret it themselves are probably
4406 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4408 * INSTALL: Improvements suggested by David Mackenzie.
4410 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4412 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4413 Don't try to copy the info files if there aren't any; the
4414 unexpanded globbing pattern disappoints `install'. Ignore the
4415 return status of that command.
4417 * INSTALL: Updated for new configuration arrangement.
4419 * configure: Don't make the top-level Makefile read-only - people
4420 may want to edit the values of the path variables.
4422 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4423 Install the info files in ${infodir}. Install the executable
4424 under both `emacs' and `emacs-VERSION'.
4426 * Makefile.in: Doc fix.
4428 * Makefile.in (exec_prefix): New variable, as per latest version
4429 of coding standards.
4430 (bindir, libdir): Use it, instead of `prefix'.
4431 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4433 * Makefile.in (mandir): Make the default value for this depend on
4436 * Makefile.in (datadir, statedir, libdir): Make these all default
4438 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4441 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4442 Install the etags and ctags man pages too.
4444 * Makefile.in (distclean): Don't delete backup files; that's the
4446 (extraclean): Like distclean, but deletes backup and autosave files.
4448 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4450 Make path specification conform to GNU coding standards.
4451 * configure (long_usage): Remove all traces of old arguments from
4452 usage messages, and document the options we do accept in more
4453 detail: -with-x... and --srcdir.
4454 (options, boolean_opts): Deleted; we don't have enough options to
4455 make this worthwhile.
4456 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4457 along with the code which supported them; these should be set as
4458 arguments to the top-level make.
4459 (config_h_opts): Since this no longer doubles as a list of option
4460 names, make them upper case; this simplifies the code which uses
4461 them to build the sed command to edit src/config.h. Change the
4462 code which sets them.
4463 (cc, g, O): Don't allow the user to set these using options; they
4464 should be specified using `CC=' and `CFLAGS=' arguments to the
4465 top-level make. Just choose reasonable default values for them,
4466 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4468 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4469 options; use them whenever the configuration files say they're
4471 Simplify the argument processing loop. Don't accept abbreviations
4472 for option names; these might conflict with other configuration
4473 options in the future.
4474 Add some support for the `--srcdir' option. Check for the sources
4475 in . and .. if `--srcdir' is omitted. If the directories we will
4476 compile in don't exist yet, create them under the current directory.
4477 Note that the rest of the build process doesn't really support
4479 Edit only the top Makefile. That should edit the others. Edit
4480 into the makefile: `version', from lisp/version.el, `configname'
4481 and `srcdir' from the configuration arguments, `CC' and
4482 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4483 the user's path, and LOADLIBES as gleaned from the system
4485 Simplify the report generated; it doesn't need to include any
4486 description of paths now.
4487 Make `config.status' exec configure instead of just calling it, so
4488 there's no harm in overwriting `config.status'.
4489 * Makefile.in (version, configname): New variables, used to choose
4490 the default values for datadir and libdir.
4491 Path variables rearranged into two clearer groups:
4492 - In the first group are the variables specified by the GNU coding
4493 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4494 manext, infodir, and srcdir).
4495 - In the second are the variables actually used for Emacs's paths
4496 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4497 archlibdir), which depend on the first category.
4498 datadir and libdir default to directories under
4499 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4501 etcdir and lispdir default to subdirectories of datadir.
4502 archlibdir defaults to libdir.
4503 The new installation tree is a bit deeper than it used to be, so
4504 use the new make-path program in lib-src to build them all.
4505 Always build a new src/paths.h.tmp and then move-if-change it to
4506 src/paths.h, to avoid unnecessary rebuilds while responding to the
4508 Remove all mention of arch-lib. Run utility commands from
4509 lib-src, and let the executables be copied into archlibdir when
4511 Add targets for src/Makefile, lib-src/Makefile, and
4512 oldXMenu/Makefile, editing the values of the path variables into
4514 Let lib-src do its own installation.
4515 (datadir): Default to putting data files under
4516 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4517 (emacsdir): Variable deleted; it would only be confusing to use.
4518 (lispdir, etcdir): Default to ${datadir}/lisp.
4519 (mkdir): Use make-path for this.
4520 (lockdir): Do this in mkdir.
4521 (Makefile): New target.
4523 * configure (usage_message): Rename to long_usage.
4525 * make-dist: Don't bother creating an arch-lib directory; that's
4526 only for installation now.
4528 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4530 * configure: Use GCC-style configuration names, using config.sub.
4531 Change the usage and help messages.
4533 * configure: Initialize window_system, not indow_system.
4535 * configure: Report which window system, compiler, and signal
4536 handler return type we decide to use.
4538 * make-dist: Explain what's going on if config.sub and gmalloc.c
4539 can't be linked. Place the code which copies them near the code
4540 which links the rest of the files around them.
4542 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4544 * make-dist: Don't bother to distribute src/*.com, or
4545 src/vmsbuild; those have all been moved to `../vms'.
4547 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4549 * make-dist: Don't forget that the way to avoid filenames starting
4550 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4551 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4552 couldn't make hard links to, since we have two already, and
4553 perhaps more to come.
4555 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4557 * configure: When editing parameters into lib-src/Makefile, change
4558 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4559 needs some other flags too.
4561 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4563 * configure: Remove spurious echo of the configuration name.
4565 * make-dist: Don't distribute files in src/m and src/s whose names
4568 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4570 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4571 Also LISP_FLOAT_TYPE.
4573 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4575 * make-dist: Copy config.sub, since it's a symbolic link to a file
4576 on another file system.
4578 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4580 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4583 * config.sub: New file, to help us recognize configuration names.
4584 * make-dist: Include it in the distribution.
4586 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4588 * configure: Convert `-' to `_' in specified option names.
4589 Accept options with --. Delete --highpri and --have-x-menu options.
4590 New options --with-x and --with-x10 replace -window-system.
4591 Don't mention options --gnu-malloc, --rel-alloc
4592 or --lisp-float-type in help message.
4594 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4596 * make-dist: Include the `vms' subdirectory in the distribution.
4598 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4600 * configure: Remove lines starting with "# DIST: " when building
4601 lib-src/Makefile and src/Makefile. This allows us to mark the
4602 "Makefile.in" files with explanatory comments which won't also get
4603 stuck in the Makefiles.
4605 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4607 * make-dist: Don't use the '+' operator in the sed regular
4608 expression that extracts the version number from lisp/version.el;
4609 Ultrix sed doesn't seem support the operator. Just double the
4612 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4614 * Makefile.in: Doc fix.
4616 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4618 * configure: Rewrite sed command to remove at most one ./ prefix;
4619 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4622 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4624 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4626 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4628 * make-dist: Go ahead and build a new TAGS file, unless the
4629 --newer option was specified. Don't try to delete a TAGS file
4630 from etc; it's not kept there, and shouldn't be deleted anyway.
4632 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4634 * make-dist: If the lisp directory contains a default.el, don't
4637 * configure: When searching signal.h for the type of a signal
4638 return handler, make a copy of it, not a symbolic link to it; that
4639 way, it will work on systems that don't have symbolic links.
4641 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4643 * make-dist: taught it about vcdiff and rcs2log, added --newer
4644 option for generating incremental distributions. Stopped it from
4645 generating a TAGS file into the distribution; that sucker is
4646 *big*, and easily enough generated with the toplevel makefile.
4648 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4650 * configure: When writing config.status, don't prefix progname
4651 with a '.'; it might be absolute.
4653 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4655 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4656 /usr/include/X11 exist, not only if both exist.
4658 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4660 * make-dist: Make the new external-lisp directory a duplicate of
4661 the external-lisp directory, not the lisp directory.
4663 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4665 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4666 clean' in arch-lib; it doesn't even have a Makefile.
4668 * Makefile.in (clean, mostlyclean): In the test which tries to
4669 distinguish between the build directory, which should be cleaned,
4670 and the installed directory, which shouldn't, cd to `${emacsdir}',
4671 not `${DESTDIR}${LIBDIR}'.
4673 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4675 * make-dist: Be sure to delete the .c and .h files that YACC and
4676 BISON create from getdate.y.
4678 * external-lisp: New directory; see `external-lisp/README'.
4679 * make-dist: Added support for the external-lisp subdirectory.
4681 * make-dist: Changed message which complains that make-dist wasn't
4682 invoked in the right directory to indicate which files it was
4685 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4687 * configure: Add comments explaining why we can't translate
4688 character ranges or control characters in `tr'.
4690 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4692 * configure: When generating the configuration message, we used to
4693 build the message from the start so that each line began with "# "
4694 so that it would be a comment in `config.status'. However, this
4695 causes trouble if any of the variables we use in the message
4696 expand to more than one line of text - as gnu_malloc_reason
4697 sometimes does. So instead, we build the message as it should be
4698 printed to the user (i.e. without the "# " prefixes), and stick on
4699 the "# "s when we write it to `config.status'.
4701 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4702 `lib-src' and `arch-lib'.
4704 * configure: When generating report and `config.status' file, note
4705 that bindir only determines where `make install' and
4706 `build-install' will place the executables; this should make it
4707 clear that the ordinary build process will not try to install
4710 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4712 * make-dist: Change messages to say that we are 'making links to
4713 X', rather than 'copying X'. And put `' quotes around file names.
4715 * make-dist: Include '.tmp' in the name of the staging directory.
4717 * make-dist: Pass the `-f' option to rm when you're not sure that
4718 the files you're removing actually exist.
4720 * make-dist: When setting up etc/COPYING, always nuke whatever is
4721 there, and then copy it in, to make sure we get a real file.
4723 * make-dist: Don't try to distribute *.defns files any more. The
4724 only such file was for simula.el, which has been superceded by a
4725 version which doesn't have a separate .defns file.
4727 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4729 * make-dist: Don't distribute configured versions of config.h.in,
4730 paths.h.in, Makefile.in in src.
4732 * configure: Delete .tmp files before creating them; don't bother
4733 trying to make final targets writeable first, since it won't
4734 matter to move-if-change.
4736 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4738 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4739 mkdir and chmod in the center of all the conditionals. GNU Make
4740 will strip these out, but other makes won't.
4742 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4744 * make-dist: Include move-if-change in list of files to distribute.
4746 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4748 * configure: Remove any "." elements from the program name.
4750 * configure: Don't record the values of all the possible arguments
4751 in config.status; only record the options that the user specified.
4753 * configure: Use move-if-change to move in the new src/config.h.
4755 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4757 * move-if-change: New file, copied from gcc release.
4758 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4759 a temp file, so we don't update paths.h if an error occurs or if
4760 it doesn't need changing.
4762 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4764 * Makefile.in (src/paths.h): Do not install a value for the
4765 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4766 * build-install.in: Same thing.
4768 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4770 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4771 latter, being a typo, is always false, resulting in a program
4772 whose default behaviour is to painstakingly build a copy of the
4773 source tree, and then delete it. Rah.
4775 * Makefile.in: Add dist target, and comment for it.
4777 * configure: When scanning <signal.h> for a declaration for
4778 signal, create a symbolic link with a name ending in .c, so the
4779 compiler won't complain that it's only been given .h files.
4781 * configure: Check whether there are any arguments available
4782 before shifting to get the value of a non-boolean parameter.
4784 * make-dist: Doc fix.
4786 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4788 * configure: Instead of grepping /usr/include/signal.h for a
4789 signal declaration, run /usr/include/signal.h or
4790 /usr/include/sys/signal.h through cpp and grep for the
4793 * configure: Redirect the output of grep to /dev/null instead of
4794 using grep -s - that flag means different things on other systems.
4796 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4797 since the former is recognizable even if you don't know what
4799 * configure: Accomodate that change.
4801 * configure: Accept options for all of the directories you can
4802 change in the Makefile.
4804 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4806 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4807 FOO before you can use them.
4809 * build-install.in: Made the "Where To Install Things" section
4810 conform with the similar section from Makefile.in. Copied section
4811 which builds src/paths.h from src/paths.h.in from the Makefile.
4813 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4815 * configure: Write config.status to pass its command-line
4816 arguments on to configure, so that people can use it to recreate
4817 an old configuration, with minor changes.
4819 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4821 * configure: Don't rely on option variables being unset if their
4822 values are the empty string. In particular, when producing the
4823 English report, don't assume that highpri will be unset when no
4824 increased priority has been requested; -highpri='' should be the
4825 same as omitting -highpri altogether.
4827 * configure: Fix dumb bug: when running the system and machine
4828 description files through cpp, mark those lines that we want to
4829 evaluate with the string '@configure@', and then only evaluate
4830 them. This way if the files include anything that actually
4831 generates text (type definitions or external declarations, say),
4832 we won't try to eval it.
4834 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4836 * make-dist: New shell script.
4838 * configure: When creating foo from foo.in, make foo read-only to
4839 remind people to edit the .in file instead.
4841 * INSTALL: Changed references to config.h-dist to config.h.in.
4842 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4843 to build src/paths.h from src/paths.h.in; added a paragraph to do
4845 * configure, Makefile, build-install: Changed filenames like
4848 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4850 * Makefile, build-install: Renamed to Makefile.in and
4851 build-install.in; the configure script will edit these to produce
4852 the usable Makefile and build-install.
4853 * configure: Changed to produce ./Makefile, ./build-install,
4854 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4855 instead of editing them in place.
4857 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4859 * Makefile: Re-arranged so that the undumped Emacs will search
4860 ../lisp *after* the site's local elisp files.
4861 (locallisppath, dumplisppath): New variables.
4862 (lisppath): This variable's default value is now chosen based on
4863 $(locallisppath) and $(lispdir); while it used to be the
4864 customization point for adding site-local elisp directories to
4865 load-path, that job is now handled mostly by locallisppath.
4866 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4867 Check the values being assigned to the *LOADSEARCH macros for null
4868 path elements (like '::' in 'foo::bar').
4870 * configure: When checking if the machine- and system-dependent
4871 files define a particular macro or not, actually run them through
4872 CPP and test the macros with #ifs, instead of just grepping for
4873 the macros' names. In particular, check for SYSTEM_MALLOC in this
4876 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4878 * Makefile (install): Don't use -s in install. (Keep the symbols.)
4880 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4882 * configure: Make the config.status file an executable shell
4883 script which will recreate the same configuration. Include the
4884 verbal description of the current configuration as a comment in
4888 * Makefile: brought the Makefile up to the GNU coding
4889 standards, as described in standards.text:
4890 (TAGS): New name for the target which rebuilds the tags table.
4891 (check): New target; doesn't do anything yet.
4892 (mostlyclean): New target, synonymous with clean.
4893 (realclean): New target. Currently, this just calls the
4894 subdirectories's makefiles and then deletes config.status.
4895 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
4897 Installation directory variables changed to conform.
4898 (install, install.sysv, install.xenix, install.aix): Changed the
4899 code which copies the directories into their installed location to
4900 allow the installed locations to be in several different
4901 directories; the old version assumed that they would all be in
4903 (mkdir, lockdir): Allow the installed locations to be in several
4904 different directories.
4907 * build-install: Use the same variable names as the Makefile.
4908 Allow the installed locations to be in several different
4911 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4913 * Makefile (src/paths.h): Instead of using a single sed command to
4914 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
4915 separately, and don't forget to append "/!!!SuperLock!!!" to the
4916 value of the PATH_SUPERLOCK macro.
4918 * config.emacs: Renamed to configure, for consistency with other
4919 GNU products. Internal references changed.
4920 INSTALL, Makefile: References changed.
4922 * lock: New directory, which should always be empty. If this
4923 directory doesn't exist, Emacs won't complain; it just won't lock.
4924 Having this here means that people can just unpack Emacs, build
4925 it, and have locking work.
4927 * share-lib: Re-renamed to etc, for the sake of tradition.
4928 * config.emacs: Changed default value for datadir to ../etc.
4929 * INSTALL, README: Adjusted.
4931 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4933 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
4934 by running CPP on the appropriate s/*.h and m/*.h files.
4936 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4938 * config.emacs: Make sure to set the "exit on error" flag once
4939 we've removed config.status; errors should abort the configuration.
4941 1992-02-15 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4943 * config.emacs: Added -distribute option, so that the Makefile
4944 paths are in their proper form. I don't know why this matters.
4946 1992-02-14 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4948 * local-lisp: New directory, empty in the distribution, for people
4949 to put local elisp code in.
4950 * config.emacs: Include it in the default load path.
4951 * README: Document it.
4953 1992-01-30 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4955 * config.emacs: Guess the type of signal handling functions based
4956 on the contents of /usr/include/signal.h.
4958 * config.emacs: Print out progress report messages.
4960 * Makefile (src/paths.h): Don't generically replace
4961 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
4962 editing of the other entries, and each entry should be dealt with
4965 * build-install: Converted from C-shell to Bourne shell.
4966 * config.emacs: Edit build-install properly.
4968 * config.emacs: Doc fix.
4970 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4972 * Makefile (install): Remove `B' from tar xf command.
4974 1992-01-13 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4976 * config.emacs: Removed support for the `maintain-environment'
4977 option; the only important difference between this and its absence
4979 * INSTALL: Removed mention of `maintain-environment'.
4981 * config.emacs: Fix arguments to sed when processing boolean
4984 1991-12-05 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
4986 * config.emacs: New file, to help automate the installation
4989 * Makefile: Lots of changes to support the separation of etc into
4990 architecture-dependent and -independent files:
4991 (EMACSROOT): New variable, giving the directory under which all of
4992 Emacs's libraries should be installed. Changed rest of file to
4994 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
4995 (DATADIR): New variable, denoting architecture-independent dir.
4996 (LOCKDIR): New variable, for completeness.
4997 (SUBDIR): No more etc, new lib-src.
4998 (COPYDIR): No more etc, new arch-lib and share-lib.
4999 (src/paths.h): Set PATH_DATA and the LOCK macros too.
5000 (src): Now depends on lib-src, not etc.
5001 * build-install: Changes parallel to the above.
5002 * README: Describe the new arrangement.
5004 * vms: New subdirectory for all the VMS stuff.
5006 1991-12-03 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
5008 * Makefile (LISPPATH): New variable.
5009 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
5011 1990-09-28 Richard Stallman (rms at mole.ai.mit.edu)
5013 * Makefile (install, install.sysv, install.xenix):
5014 Install wakeup instead of loadst. No need for setuid or setgid.
5016 1990-08-07 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5018 * Makefile (clean): Clean etc if that's not the installation dir.
5020 1990-04-26 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5022 * Makefile (paths.h): Make sed alter each name in the path.
5024 1988-08-30 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5026 * Makefile (install.sysv): Use cpio, not tar.
5028 1988-08-03 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5030 * Makefile (lockdir): Rename `lock' target.
5031 Depend on it from install*, not from `all'.
5033 1988-05-16 Richard Stallman (rms at frosted-flakes.ai.mit.edu)
5035 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
5036 to match build-install and paths.h.
5039 ;; coding: iso-2022-7bit-unix
5042 Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001
5043 Free Software Foundation, Inc.
5044 Copying and distribution of this file, with or without modification,
5045 are permitted provided the copyright notice and this notice are preserved.