| blob | 3abb03a084a0e24e6946f1db1896278a1bff08c9 |
1 ;;; isearch.el --- incremental search minor mode
3 ;; Copyright (C) 1992-1997, 1999-2013 Free Software Foundation, Inc.
5 ;; Author: Daniel LaLiberte <liberte@cs.uiuc.edu>
6 ;; Maintainer: FSF
7 ;; Keywords: matching
8 ;; Package: emacs
10 ;; This file is part of GNU Emacs.
12 ;; GNU Emacs is free software: you can redistribute it and/or modify
13 ;; it under the terms of the GNU General Public License as published by
14 ;; the Free Software Foundation, either version 3 of the License, or
15 ;; (at your option) any later version.
17 ;; GNU Emacs is distributed in the hope that it will be useful,
18 ;; but WITHOUT ANY WARRANTY; without even the implied warranty of
19 ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 ;; GNU General Public License for more details.
22 ;; You should have received a copy of the GNU General Public License
23 ;; along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
25 ;;; Commentary:
27 ;; Instructions
29 ;; For programmed use of isearch-mode, e.g. calling (isearch-forward),
30 ;; isearch-mode behaves modally and does not return until the search
31 ;; is completed. It uses a recursive-edit to behave this way.
33 ;; The key bindings active within isearch-mode are defined below in
34 ;; `isearch-mode-map' which is given bindings close to the default
35 ;; characters of the original isearch.el. With `isearch-mode',
36 ;; however, you can bind multi-character keys and it should be easier
37 ;; to add new commands. One bug though: keys with meta-prefix cannot
38 ;; be longer than two chars. Also see minibuffer-local-isearch-map
39 ;; for bindings active during `isearch-edit-string'.
41 ;; isearch-mode should work even if you switch windows with the mouse,
42 ;; in which case isearch-mode is terminated automatically before the
43 ;; switch.
45 ;; The search ring and completion commands automatically put you in
46 ;; the minibuffer to edit the string. This gives you a chance to
47 ;; modify the search string before executing the search. There are
48 ;; three commands to terminate the editing: C-s and C-r exit the
49 ;; minibuffer and search forward and reverse respectively, while C-m
50 ;; exits and searches in the last search direction.
52 ;; Exiting immediately from isearch uses isearch-edit-string instead
53 ;; of nonincremental-search, if search-nonincremental-instead is non-nil.
54 ;; The name of this option should probably be changed if we decide to
55 ;; keep the behavior. No point in forcing nonincremental search until
56 ;; the last possible moment.
58 ;;; Code:
61 \f
62 ;; Some additional options and constants.
65 "Incremental search minor mode."
74 "Non-nil means random control characters terminate incremental search."
79 "Number of lines in slow search display windows.
80 These are the short windows used during incremental search on slow terminals.
81 Negative means put the slow search window at the top (normally it's at bottom)
82 and the value is minus the number of lines."
88 This is the style where a one-line window is created to show the line
89 that the search has reached."
94 "If non-nil, upper case chars disable case fold searching.
95 That is, upper and lower case chars must match exactly.
96 This applies no matter where the chars come from, but does not
98 If this value is `not-yanks', text yanked into the search string
99 in Isearch mode is always downcased."
106 "If non-nil, do a nonincremental search instead of exiting immediately.
107 Actually, `isearch-edit-string' is called to let you enter the search
108 string, and RET terminates editing and does a nonincremental search."
113 "If non-nil, regular expression to match a sequence of whitespace chars.
114 When you enter a space or spaces in the incremental search, it
115 will match any sequence matched by this regexp. As an exception,
116 spaces are treated normally in regexp incremental search if they
117 occur in a regexp construct like [...] or *, + or ?.
119 If the value is a string, it applies to both ordinary and
120 regexp incremental search. If the value is nil, or
121 `isearch-lax-whitespace' is nil for ordinary incremental search, or
122 `isearch-regexp-lax-whitespace' is nil for regexp incremental search,
123 then each space you type matches literally, against one space.
126 In the Customization buffer, that is `[' followed by a space,
127 a tab, a carriage return (control-M), a newline, and `]+'."
129 regexp)
134 "If t incremental search can match hidden text.
135 A nil value means don't match invisible text.
136 When the value is `open', if the text matched is made invisible by
137 an overlay having an `invisible' property and that overlay has a property
138 `isearch-open-invisible', then incremental search will show the contents.
139 \(This applies when using `outline.el' and `hideshow.el'.)
140 See also `reveal-mode' if you want overlays to automatically be opened
141 whenever point is in one of them."
148 "If non-nil, re-hide an invisible match right away.
149 This variable makes a difference when `search-invisible' is set to `open'.
150 It means that after search makes some invisible text visible
151 to show the match, it makes the text invisible again when the match moves.
152 Ordinarily the text becomes invisible again at the end of the search."
157 "If non-nil, `isearch-resume' commands are added to the command history.
158 This allows you to resume earlier Isearch sessions through the
159 command history."
170 "Function(s) to call after terminating an incremental search.
171 When these functions are called, `isearch-mode-end-hook-quit'
178 "Function to call to display the search prompt.
182 "Function to call to wrap the search when search is failed.
183 If nil, move point to the beginning of the buffer for a forward search,
187 "Function to save a function restoring the mode-specific Isearch state
191 "Predicate that filter the search hits that would normally be available.
192 Search hits that dissatisfy the predicate are skipped. The function
193 has two arguments: the positions of start and end of text matched by
194 the search. If this function returns nil, continue searching without
195 stopping at this match.
196 If you use `add-function' to modify this variable, you can use the
197 `isearch-message-prefix' advice property to specify the prefix string
200 ;; Search ring.
208 "Maximum length of search ring before oldest elements are thrown away."
212 "Maximum length of regexp search ring before oldest elements are thrown away."
217 "Index in `search-ring' of last string reused.
220 "Index in `regexp-search-ring' of last string reused.
224 "Non-nil if advancing or retreating in the search ring should cause search.
225 Default value, nil, means edit the string instead."
229 ;;; isearch highlight customization.
232 "Non-nil means incremental search highlights the current match."
238 ;; The background must not be too dark, for that means
239 ;; the character is hard to see when the cursor is there.
248 "Face for highlighting Isearch matches."
265 "Face for highlighting failed part in Isearch echo-area message."
270 "Controls the lazy-highlighting during incremental search.
271 When non-nil, all text in the buffer matching the current search
272 string is highlighted lazily (see `lazy-highlight-initial-delay'
273 and `lazy-highlight-interval')."
278 ;;; Lazy highlight customization.
281 "Lazy highlighting feature for matching strings."
288 'lazy-highlight-cleanup
292 "Controls whether to remove extra highlighting after a search.
299 'lazy-highlight-initial-delay
303 "Seconds to wait before beginning to lazily highlight all matches."
308 'lazy-highlight-interval
312 "Seconds between lazily highlighting successive matches."
317 'lazy-highlight-max-at-a-time
321 "Maximum matches to highlight at a time (for `lazy-highlight').
322 Larger values may reduce Isearch's responsiveness to user input;
323 smaller values make matches highlight slowly.
324 A value of nil means highlight all matches."
339 "Face for lazy highlighting of matches other than the current one."
344 'lazy-highlight-face
347 \f
348 ;; Define isearch help map.
354 (define-key map [f1] 'isearch-help-for-help)
355 (define-key map "?" 'isearch-help-for-help)
356 (define-key map "b" 'isearch-describe-bindings)
357 (define-key map "k" 'isearch-describe-key)
358 (define-key map "m" 'isearch-describe-mode)
359 (define-key map "q" 'help-quit)
360 map)
361 "Keymap for characters following the Help key for Isearch mode.")
363 (eval-when-compile (require 'help-macro))
365 (make-help-screen isearch-help-for-help-internal
366 (purecopy "Type a help option: [bkm] or ?")
367 "You have typed %THIS-KEY%, the help character. Type a Help option:
370 b Display all Isearch key bindings.
371 k KEYS Display full documentation of Isearch key sequence.
372 m Display documentation of Isearch mode.
374 You can't type here other help keys available in the global help map,
375 but outside of this help window when you type them in Isearch mode,
376 they exit Isearch mode before displaying global help."
377 isearch-help-map)
379 (defvar isearch--display-help-action '(nil (inhibit-same-window . t)))
381 (defun isearch-help-for-help ()
382 "Display Isearch help menu."
383 (interactive)
384 (let ((display-buffer-overriding-action isearch--display-help-action))
385 (isearch-help-for-help-internal))
386 (isearch-update))
388 (defun isearch-describe-bindings ()
389 "Show a list of all keys defined in Isearch mode, and their definitions.
390 This is like `describe-bindings', but displays only Isearch keys."
391 (interactive)
392 (let ((display-buffer-overriding-action isearch--display-help-action))
393 (with-help-window "*Help*"
394 (with-current-buffer standard-output
398 (defun isearch-describe-key ()
399 "Display documentation of the function invoked by isearch key."
400 (interactive)
401 (let ((display-buffer-overriding-action isearch--display-help-action))
402 (call-interactively 'describe-key))
403 (isearch-update))
405 (defun isearch-describe-mode ()
406 "Display documentation of Isearch mode."
407 (interactive)
408 (let ((display-buffer-overriding-action isearch--display-help-action))
409 (describe-function 'isearch-forward))
410 (isearch-update))
412 (defalias 'isearch-mode-help 'isearch-describe-mode)
414 \f
415 ;; Define isearch-mode keymap.
417 (defvar isearch-mode-map
418 (let ((i 0)
419 (map (make-keymap)))
420 (or (char-table-p (nth 1 map))
421 (error "The initialization of isearch-mode-map must be updated"))
422 ;; Make all multibyte characters search for themselves.
423 (set-char-table-range (nth 1 map) (cons #x100 (max-char))
424 'isearch-printing-char)
426 ;; Single-byte printing chars extend the search string by default.
427 (setq i ?\s)
428 (while (< i 256)
429 (define-key map (vector i) 'isearch-printing-char)
430 (setq i (1+ i)))
432 ;; To handle local bindings with meta char prefix keys, define
433 ;; another full keymap. This must be done for any other prefix
434 ;; keys as well, one full keymap per char of the prefix key. It
435 ;; would be simpler to disable the global keymap, and/or have a
436 ;; default local key binding for any key not otherwise bound.
437 (let ((meta-map (make-sparse-keymap)))
438 (define-key map (char-to-string meta-prefix-char) meta-map)
439 (define-key map [escape] meta-map))
441 ;; Several non-printing chars change the searching behavior.
442 (define-key map "\C-s" 'isearch-repeat-forward)
443 (define-key map "\C-r" 'isearch-repeat-backward)
444 ;; Define M-C-s and M-C-r like C-s and C-r so that the same key
445 ;; combinations can be used to repeat regexp isearches that can
446 ;; be used to start these searches.
447 (define-key map "\M-\C-s" 'isearch-repeat-forward)
448 (define-key map "\M-\C-r" 'isearch-repeat-backward)
450 (define-key map "\C-g" 'isearch-abort)
452 ;; This assumes \e is the meta-prefix-char.
453 (or (= ?\e meta-prefix-char)
454 (error "Inconsistency in isearch.el"))
455 (define-key map "\e\e\e" 'isearch-cancel)
456 (define-key map [escape escape escape] 'isearch-cancel)
458 (define-key map "\C-q" 'isearch-quote-char)
461 (define-key map "\C-j" 'isearch-printing-char)
463 (define-key map [?\S-\ ] 'isearch-printing-char)
465 (define-key map "\C-w" 'isearch-yank-word-or-char)
466 (define-key map "\M-\C-w" 'isearch-del-char)
467 (define-key map "\M-\C-y" 'isearch-yank-char)
468 (define-key map "\C-y" 'isearch-yank-kill)
469 (define-key map "\M-s\C-e" 'isearch-yank-line)
471 (define-key map (char-to-string help-char) isearch-help-map)
475 (define-key map "\M-n" 'isearch-ring-advance)
476 (define-key map "\M-p" 'isearch-ring-retreat)
477 (define-key map "\M-y" 'isearch-yank-pop)
481 ;; Pass frame events transparently so they won't exit the search.
482 ;; In particular, if we have more than one display open, then a
483 ;; switch-frame might be generated by someone typing at another keyboard.
484 (define-key map [switch-frame] nil)
485 (define-key map [delete-frame] nil)
486 (define-key map [iconify-frame] nil)
487 (define-key map [make-frame-visible] nil)
488 (define-key map [mouse-movement] nil)
489 (define-key map [language-change] nil)
491 ;; For searching multilingual text.
493 (define-key map "\C-^" 'isearch-toggle-specified-input-method)
495 ;; People expect to be able to paste with the mouse.
496 (define-key map [mouse-2] #'isearch-mouse-2)
497 (define-key map [down-mouse-2] nil)
499 ;; Some bindings you may want to put in your isearch-mode-hook.
500 ;; Suggest some alternates...
501 (define-key map "\M-c" 'isearch-toggle-case-fold)
502 (define-key map "\M-r" 'isearch-toggle-regexp)
503 (define-key map "\M-e" 'isearch-edit-string)
505 (define-key map "\M-sc" 'isearch-toggle-case-fold)
506 (define-key map "\M-si" 'isearch-toggle-invisible)
507 (define-key map "\M-sr" 'isearch-toggle-regexp)
508 (define-key map "\M-sw" 'isearch-toggle-word)
509 (define-key map "\M-s_" 'isearch-toggle-symbol)
510 (define-key map "\M-s " 'isearch-toggle-lax-whitespace)
512 (define-key map [?\M-%] 'isearch-query-replace)
513 (define-key map [?\C-\M-%] 'isearch-query-replace-regexp)
514 (define-key map "\M-so" 'isearch-occur)
515 (define-key map "\M-shr" 'isearch-highlight-regexp)
517 ;; The key translations defined in the C-x 8 prefix should add
518 ;; characters to the search string. See iso-transl.el.
521 map)
522 "Keymap for `isearch-mode'.")
524 (defvar minibuffer-local-isearch-map
525 (let ((map (make-sparse-keymap)))
526 (set-keymap-parent map minibuffer-local-map)
529 (define-key map "\C-s" 'isearch-forward-exit-minibuffer)
530 (define-key map "\C-r" 'isearch-reverse-exit-minibuffer)
531 (define-key map "\C-f" 'isearch-yank-char-in-minibuffer)
532 (define-key map [right] 'isearch-yank-char-in-minibuffer)
533 map)
534 "Keymap for editing Isearch strings in the minibuffer.")
536 ;; Internal variables declared globally for byte-compiler.
537 ;; These are all set with setq while isearching
538 ;; and bound locally while editing the search string.
540 (defvar isearch-forward nil) ; Searching in the forward direction.
541 (defvar isearch-regexp nil) ; Searching for a regexp.
542 (defvar isearch-word nil
543 "Regexp-based search mode for words/symbols.
544 If t, do incremental search for a sequence of words, ignoring punctuation.
545 If the value is a function (e.g. `isearch-symbol-regexp'), it is called to
546 convert the search string to a regexp used by regexp search functions.
547 The property `isearch-message-prefix' put on this function specifies the
548 prefix string displayed in the search message.")
550 (defvar isearch-lax-whitespace t
551 "If non-nil, a space will match a sequence of whitespace chars.
552 When you enter a space or spaces in ordinary incremental search, it
553 will match any sequence matched by the regexp defined by the variable
554 `search-whitespace-regexp'. If the value is nil, each space you type
555 matches literally, against one space. You can toggle the value of this
556 variable by the command `isearch-toggle-lax-whitespace'.")
558 (defvar isearch-regexp-lax-whitespace nil
559 "If non-nil, a space will match a sequence of whitespace chars.
560 When you enter a space or spaces in regexp incremental search, it
561 will match any sequence matched by the regexp defined by the variable
562 `search-whitespace-regexp'. If the value is nil, each space you type
563 matches literally, against one space. You can toggle the value of this
564 variable by the command `isearch-toggle-lax-whitespace'.")
566 (defvar isearch-cmds nil
567 "Stack of search status sets.
568 Each set is a vector of the form:
569 [STRING MESSAGE POINT SUCCESS FORWARD OTHER-END WORD
570 INVALID-REGEXP WRAPPED BARRIER WITHIN-BRACKETS CASE-FOLD-SEARCH]")
572 (defvar isearch-string "") ; The current search string.
573 (defvar isearch-message "") ; text-char-description version of isearch-string
575 (defvar isearch-message-prefix-add nil) ; Additional text for the message prefix
576 (defvar isearch-message-suffix-add nil) ; Additional text for the message suffix
578 (defvar isearch-success t) ; Searching is currently successful.
579 (defvar isearch-error nil) ; Error message for failed search.
580 (defvar isearch-other-end nil) ; Start (end) of match if forward (backward).
581 (defvar isearch-wrapped nil) ; Searching restarted from the top (bottom).
582 (defvar isearch-barrier 0
583 "Recorded minimum/maximal point for the current search.")
584 (defvar isearch-just-started nil)
585 (defvar isearch-start-hscroll 0) ; hscroll when starting the search.
587 ;; case-fold-search while searching.
588 ;; either nil, t, or 'yes. 'yes means the same as t except that mixed
589 ;; case in the search string is ignored.
590 (defvar isearch-case-fold-search nil)
592 ;; search-invisible while searching.
593 ;; either nil, t, or 'open. 'open means the same as t except that
594 ;; opens hidden overlays.
595 (defvar isearch-invisible search-invisible)
597 (defvar isearch-last-case-fold-search nil)
599 ;; Used to save default value while isearch is active
600 (defvar isearch-original-minibuffer-message-timeout nil)
602 (defvar isearch-adjusted nil)
603 (defvar isearch-slow-terminal-mode nil)
604 ;; If t, using a small window.
605 (defvar isearch-small-window nil)
606 (defvar isearch-opoint 0)
607 ;; The window configuration active at the beginning of the search.
608 (defvar isearch-window-configuration nil)
610 ;; Flag to indicate a yank occurred, so don't move the cursor.
611 (defvar isearch-yank-flag nil)
613 ;; A function to be called after each input character is processed.
614 ;; (It is not called after characters that exit the search.)
615 ;; It is only set from an optional argument to `isearch-mode'.
616 (defvar isearch-op-fun nil)
618 ;; Is isearch-mode in a recursive edit for modal searching.
619 (defvar isearch-recursive-edit nil)
621 ;; Should isearch be terminated after doing one search?
622 (defvar isearch-nonincremental nil)
624 ;; New value of isearch-forward after isearch-edit-string.
625 (defvar isearch-new-forward nil)
627 ;; Accumulate here the overlays opened during searching.
628 (defvar isearch-opened-overlays nil)
630 ;; Non-nil if the string exists but is invisible.
631 (defvar isearch-hidden nil)
633 ;; The value of input-method-function when isearch is invoked.
634 (defvar isearch-input-method-function nil)
636 ;; A flag to tell if input-method-function is locally bound when
637 ;; isearch is invoked.
638 (defvar isearch-input-method-local-p nil)
640 ;; Minor-mode-alist changes - kind of redundant with the
641 ;; echo area, but if isearching in multiple windows, it can be useful.
643 (or (assq 'isearch-mode minor-mode-alist)
644 (nconc minor-mode-alist
645 (list '(isearch-mode isearch-mode))))
647 (defvar isearch-mode nil) ;; Name of the minor mode, if non-nil.
648 (make-variable-buffer-local 'isearch-mode)
650 (define-key global-map "\C-s" 'isearch-forward)
651 (define-key esc-map "\C-s" 'isearch-forward-regexp)
652 (define-key global-map "\C-r" 'isearch-backward)
653 (define-key esc-map "\C-r" 'isearch-backward-regexp)
654 (define-key search-map "w" 'isearch-forward-word)
655 (define-key search-map "_" 'isearch-forward-symbol)
656 (define-key search-map "." 'isearch-forward-symbol-at-point)
658 ;; Entry points to isearch-mode.
660 (defun isearch-forward (&optional regexp-p no-recursive-edit)
661 "\
662 Do incremental search forward.
663 With a prefix argument, do an incremental regular expression search instead.
665 As you type characters, they add to the search string and are found.
666 The following non-printing keys are bound in `isearch-mode-map'.
670 Type LFD (C-j) to match end of line.
674 onto the end of the search string, and search for it.
677 string and search for it.
679 and search for it.
682 with string killed before it.
685 with completion.
687 back to what has
688 been found successfully.
690 starting point.
692 If you try to exit with the search string still empty, it invokes
693 nonincremental search.
702 In incremental searches, a space or spaces normally matches any whitespace
703 defined by the variable `search-whitespace-regexp'; see also the variables
704 `isearch-lax-whitespace' and `isearch-regexp-lax-whitespace'.
708 Also supported is a search ring of the previous 16 search strings.
711 ring.
715 replace from last search string.
717 with the last search string.
719 the last search string.
721 that highlights the last search string.
727 If an input method is turned on in the current buffer, that input
728 method is also active while you are typing characters to search.
730 It also toggles the input
731 method in the current buffer.
733 To use a different input method for searching, type \
735 and specify an input method you want to use.
737 The above keys, bound in `isearch-mode-map', are often controlled by
739 Other control and meta characters terminate the search
740 and are then executed normally (depending on `search-exit-option').
741 Likewise for function keys and mouse button events.
743 If this function is called non-interactively with a nil NO-RECURSIVE-EDIT,
744 it does not return to the calling function until the search is done.
745 See the function `isearch-mode' for more information."
748 (isearch-mode t (not (null regexp-p)) nil (not no-recursive-edit)))
750 (defun isearch-forward-regexp (&optional not-regexp no-recursive-edit)
751 "Do incremental search forward for regular expression.
752 With a prefix argument, do a regular string search instead.
753 Like ordinary incremental search except that your input is treated
754 as a regexp. See the command `isearch-forward' for more information.
756 In incremental searches, a space or spaces normally matches any
757 whitespace defined by the variable `search-whitespace-regexp'.
758 To search for a literal space and nothing else, enter C-q SPC.
759 To toggle whitespace matching, use `isearch-toggle-lax-whitespace'."
761 (isearch-mode t (null not-regexp) nil (not no-recursive-edit)))
763 (defun isearch-forward-word (&optional not-word no-recursive-edit)
764 "Do incremental search forward for a sequence of words.
765 With a prefix argument, do a regular string search instead.
766 Like ordinary incremental search except that your input is treated
767 as a sequence of words without regard to how the words are separated.
768 See the command `isearch-forward' for more information."
770 (isearch-mode t nil nil (not no-recursive-edit) (null not-word)))
772 (defun isearch-forward-symbol (&optional _not-symbol no-recursive-edit)
773 "Do incremental search forward for a symbol.
774 The prefix argument is currently unused.
775 Like ordinary incremental search except that your input is treated
777 See the command `isearch-forward' for more information."
779 (isearch-mode t nil nil (not no-recursive-edit) 'isearch-symbol-regexp))
781 (defun isearch-backward (&optional regexp-p no-recursive-edit)
782 "Do incremental search backward.
783 With a prefix argument, do a regular expression search instead.
784 See the command `isearch-forward' for more information."
786 (isearch-mode nil (not (null regexp-p)) nil (not no-recursive-edit)))
788 (defun isearch-backward-regexp (&optional not-regexp no-recursive-edit)
789 "Do incremental search backward for regular expression.
790 With a prefix argument, do a regular string search instead.
791 Like ordinary incremental search except that your input is treated
792 as a regexp. See the command `isearch-forward' for more information."
794 (isearch-mode nil (null not-regexp) nil (not no-recursive-edit)))
796 (defun isearch-forward-symbol-at-point ()
797 "Do incremental search forward for a symbol found near point.
798 Like ordinary incremental search except that the symbol found at point
799 is added to the search string initially as a regexp surrounded
801 See the command `isearch-forward-symbol' for more information."
802 (interactive)
803 (isearch-forward-symbol nil 1)
804 (let ((bounds (find-tag-default-bounds)))
805 (cond
806 (bounds
807 (when (< (car bounds) (point))
808 (goto-char (car bounds)))
809 (isearch-yank-string
810 (buffer-substring-no-properties (car bounds) (cdr bounds))))
811 (t
812 (setq isearch-error "No symbol at point")
813 (isearch-update)))))
815 \f
816 ;; isearch-mode only sets up incremental search for the minor mode.
817 ;; All the work is done by the isearch-mode commands.
819 ;; Not used yet:
820 ;;(defvar isearch-commands '(isearch-forward isearch-backward
821 ;; isearch-forward-regexp isearch-backward-regexp)
822 ;; "List of commands for which isearch-mode does not recursive-edit.")
825 (defun isearch-mode (forward &optional regexp op-fun recursive-edit word)
826 "Start Isearch minor mode.
827 It is called by the function `isearch-forward' and other related functions.
829 The non-nil arg FORWARD means searching in the forward direction.
831 The non-nil arg REGEXP does an incremental regular expression search.
833 The arg OP-FUN is a function to be called after each input character
834 is processed. (It is not called after characters that exit the search.)
836 When the arg RECURSIVE-EDIT is non-nil, this function behaves modally and
837 does not return to the calling function until the search is completed.
838 To behave this way it enters a recursive-edit and exits it when done
839 isearching.
841 The arg WORD, if t, does incremental search for a sequence of words,
842 ignoring punctuation. If the value is a function, it is called to
843 convert the search string to a regexp used by regexp search functions."
845 ;; Initialize global vars.
846 (setq isearch-forward forward
847 isearch-regexp regexp
848 isearch-word word
849 isearch-op-fun op-fun
850 isearch-last-case-fold-search isearch-case-fold-search
851 isearch-case-fold-search case-fold-search
852 isearch-invisible search-invisible
853 isearch-string ""
854 isearch-message ""
855 isearch-cmds nil
856 isearch-success t
857 isearch-wrapped nil
858 isearch-barrier (point)
859 isearch-adjusted nil
860 isearch-yank-flag nil
861 isearch-error nil
862 isearch-slow-terminal-mode (and (<= baud-rate search-slow-speed)
863 (> (window-height)
864 (* 4
865 (abs search-slow-window-lines))))
866 isearch-other-end nil
867 isearch-small-window nil
868 isearch-just-started t
869 isearch-start-hscroll (window-hscroll)
871 isearch-opoint (point)
872 search-ring-yank-pointer nil
873 isearch-opened-overlays nil
874 isearch-input-method-function input-method-function
875 isearch-input-method-local-p (local-variable-p 'input-method-function)
876 regexp-search-ring-yank-pointer nil
878 ;; Save the original value of `minibuffer-message-timeout', and
879 ;; set it to nil so that isearch's messages don't get timed out.
880 isearch-original-minibuffer-message-timeout minibuffer-message-timeout
881 minibuffer-message-timeout nil)
883 ;; We must bypass input method while reading key. When a user type
884 ;; printable character, appropriate input method is turned on in
885 ;; minibuffer to read multibyte characters.
886 (or isearch-input-method-local-p
887 (make-local-variable 'input-method-function))
888 (setq input-method-function nil)
890 (looking-at "")
891 (setq isearch-window-configuration
892 (if isearch-slow-terminal-mode (current-window-configuration) nil))
894 ;; Maybe make minibuffer frame visible and/or raise it.
895 (let ((frame (window-frame (minibuffer-window))))
896 (unless (memq (frame-live-p frame) '(nil t))
897 (unless (frame-visible-p frame)
898 (make-frame-visible frame))
899 (if minibuffer-auto-raise
900 (raise-frame frame))))
902 (setq isearch-mode " Isearch") ;; forward? regexp?
903 (force-mode-line-update)
905 (setq overriding-terminal-local-map isearch-mode-map)
906 (run-hooks 'isearch-mode-hook)
908 ;; Pushing the initial state used to be before running isearch-mode-hook,
909 ;; but a hook might set `isearch-push-state-function' used in
910 ;; `isearch-push-state' to save mode-specific initial state. (Bug#4994)
911 (isearch-push-state)
913 (isearch-update)
915 (add-hook 'pre-command-hook 'isearch-pre-command-hook nil t)
916 (add-hook 'post-command-hook 'isearch-post-command-hook nil t)
917 (add-hook 'mouse-leave-buffer-hook 'isearch-done)
918 (add-hook 'kbd-macro-termination-hook 'isearch-done)
920 ;; isearch-mode can be made modal (in the sense of not returning to
921 ;; the calling function until searching is completed) by entering
922 ;; a recursive-edit and exiting it when done isearching.
923 (if recursive-edit
924 (let ((isearch-recursive-edit t))
925 (recursive-edit)))
926 isearch-success)
929 ;; Some high level utilities. Others below.
931 (defun isearch-update ()
932 "This is called after every isearch command to update the display.
933 The last thing it does is to run `isearch-update-post-hook'."
934 (if (and (null unread-command-events)
935 (null executing-kbd-macro))
936 (progn
937 (if (not (input-pending-p))
938 (if isearch-message-function
939 (funcall isearch-message-function)
940 (isearch-message)))
941 (if (and isearch-slow-terminal-mode
942 (not (or isearch-small-window
943 (pos-visible-in-window-p))))
944 (let ((found-point (point)))
945 (setq isearch-small-window t)
946 (move-to-window-line 0)
947 (let ((window-min-height 1))
948 (split-window nil (if (< search-slow-window-lines 0)
949 (1+ (- search-slow-window-lines))
950 (- (window-height)
951 (1+ search-slow-window-lines)))))
952 (if (< search-slow-window-lines 0)
953 (progn (vertical-motion (- 1 search-slow-window-lines))
954 (set-window-start (next-window) (point))
955 (set-window-hscroll (next-window)
956 (window-hscroll))
957 (set-window-hscroll (selected-window) 0))
958 (other-window 1))
959 (goto-char found-point))
960 ;; Keep same hscrolling as at the start of the search when possible
961 (let ((current-scroll (window-hscroll)))
962 (set-window-hscroll (selected-window) isearch-start-hscroll)
963 (unless (pos-visible-in-window-p)
964 (set-window-hscroll (selected-window) current-scroll))))
965 (if isearch-other-end
966 (if (< isearch-other-end (point)) ; isearch-forward?
967 (isearch-highlight isearch-other-end (point))
968 (isearch-highlight (point) isearch-other-end))
969 (isearch-dehighlight))))
970 (setq ;; quit-flag nil not for isearch-mode
971 isearch-adjusted nil
972 isearch-yank-flag nil)
973 (when isearch-lazy-highlight
974 (isearch-lazy-highlight-new-loop))
975 ;; We must prevent the point moving to the end of composition when a
976 ;; part of the composition has just been searched.
977 (setq disable-point-adjustment t)
978 (run-hooks 'isearch-update-post-hook))
980 (defun isearch-done (&optional nopush edit)
981 "Exit Isearch mode.
982 For successful search, pass no args.
983 For a failing search, NOPUSH is t.
984 For going to the minibuffer to edit the search string,
985 NOPUSH is t and EDIT is t."
987 (if isearch-resume-in-command-history
988 (let ((command `(isearch-resume ,isearch-string ,isearch-regexp
989 ,isearch-word ,isearch-forward
990 ,isearch-message
991 ',isearch-case-fold-search)))
992 (unless (equal (car command-history) command)
993 (setq command-history (cons command command-history)))))
995 (remove-hook 'pre-command-hook 'isearch-pre-command-hook t)
996 (remove-hook 'post-command-hook 'isearch-post-command-hook t)
997 (remove-hook 'mouse-leave-buffer-hook 'isearch-done)
998 (remove-hook 'kbd-macro-termination-hook 'isearch-done)
999 (setq isearch-lazy-highlight-start nil)
1001 ;; Called by all commands that terminate isearch-mode.
1002 ;; If NOPUSH is non-nil, we don't push the string on the search ring.
1003 (setq overriding-terminal-local-map nil)
1004 ;; (setq pre-command-hook isearch-old-pre-command-hook) ; for lemacs
1005 (setq minibuffer-message-timeout isearch-original-minibuffer-message-timeout)
1006 (isearch-dehighlight)
1007 (lazy-highlight-cleanup lazy-highlight-cleanup)
1008 (let ((found-start (window-start))
1009 (found-point (point)))
1010 (when isearch-window-configuration
1011 (set-window-configuration isearch-window-configuration)
1012 (if isearch-small-window
1013 (goto-char found-point)
1014 ;; set-window-configuration clobbers window-start; restore it.
1015 ;; This has an annoying side effect of clearing the last_modiff
1016 ;; field of the window, which can cause unwanted scrolling,
1017 ;; so don't do it unless truly necessary.
1018 (set-window-start (selected-window) found-start t))))
1020 (setq isearch-mode nil)
1021 (if isearch-input-method-local-p
1022 (setq input-method-function isearch-input-method-function)
1023 (kill-local-variable 'input-method-function))
1025 (force-mode-line-update)
1027 ;; If we ended in the middle of some intangible text,
1028 ;; move to the further end of that intangible text.
1029 (let ((after (if (eobp) nil
1030 (get-text-property (point) 'intangible)))
1031 (before (if (bobp) nil
1032 (get-text-property (1- (point)) 'intangible))))
1033 (when (and before after (eq before after))
1034 (goto-char
1035 (if isearch-forward
1036 (next-single-property-change (point) 'intangible)
1037 (previous-single-property-change (point) 'intangible)))))
1039 (if (and (> (length isearch-string) 0) (not nopush))
1040 ;; Update the ring data.
1041 (isearch-update-ring isearch-string isearch-regexp))
1043 (let ((isearch-mode-end-hook-quit (and nopush (not edit))))
1044 (run-hooks 'isearch-mode-end-hook))
1046 ;; If there was movement, mark the starting position.
1047 ;; Maybe should test difference between and set mark only if > threshold.
1048 (if (/= (point) isearch-opoint)
1049 (or (and transient-mark-mode mark-active)
1050 (progn
1051 (push-mark isearch-opoint t)
1052 (or executing-kbd-macro (> (minibuffer-depth) 0) edit
1053 (message "Mark saved where search started")))))
1055 (and (not edit) isearch-recursive-edit (exit-recursive-edit)))
1057 (defun isearch-update-ring (string &optional regexp)
1058 "Add STRING to the beginning of the search ring.
1059 REGEXP if non-nil says use the regexp search ring."
1060 (add-to-history
1061 (if regexp 'regexp-search-ring 'search-ring)
1062 string
1063 (if regexp regexp-search-ring-max search-ring-max)))
1065 ;; Switching buffers should first terminate isearch-mode.
1066 ;; ;; For Emacs 19, the frame switch event is handled.
1067 ;; (defun isearch-switch-frame-handler ()
1068 ;; (interactive) ;; Is this necessary?
1069 ;; ;; First terminate isearch-mode.
1070 ;; (isearch-done)
1071 ;; (isearch-clean-overlays)
1072 ;; (handle-switch-frame (car (cdr last-command-event))))
1074 \f
1075 ;; The search status structure and stack.
1077 (cl-defstruct (isearch--state
1078 (:constructor nil)
1079 (:copier nil)
1080 (:constructor isearch--get-state
1081 (&aux
1082 (string isearch-string)
1083 (message isearch-message)
1084 (point (point))
1085 (success isearch-success)
1086 (forward isearch-forward)
1087 (other-end isearch-other-end)
1088 (word isearch-word)
1089 (error isearch-error)
1090 (wrapped isearch-wrapped)
1091 (barrier isearch-barrier)
1092 (case-fold-search isearch-case-fold-search)
1093 (pop-fun (if isearch-push-state-function
1094 (funcall isearch-push-state-function))))))
1095 (string :read-only t)
1096 (message :read-only t)
1097 (point :read-only t)
1098 (success :read-only t)
1099 (forward :read-only t)
1100 (other-end :read-only t)
1101 (word :read-only t)
1102 (error :read-only t)
1103 (wrapped :read-only t)
1104 (barrier :read-only t)
1105 (case-fold-search :read-only t)
1106 (pop-fun :read-only t))
1108 (defun isearch--set-state (cmd)
1109 (setq isearch-string (isearch--state-string cmd)
1110 isearch-message (isearch--state-message cmd)
1111 isearch-success (isearch--state-success cmd)
1112 isearch-forward (isearch--state-forward cmd)
1113 isearch-other-end (isearch--state-other-end cmd)
1114 isearch-word (isearch--state-word cmd)
1115 isearch-error (isearch--state-error cmd)
1116 isearch-wrapped (isearch--state-wrapped cmd)
1117 isearch-barrier (isearch--state-barrier cmd)
1118 isearch-case-fold-search (isearch--state-case-fold-search cmd))
1119 (if (functionp (isearch--state-pop-fun cmd))
1120 (funcall (isearch--state-pop-fun cmd) cmd))
1121 (goto-char (isearch--state-point cmd)))
1123 (defun isearch-pop-state ()
1124 (setq isearch-cmds (cdr isearch-cmds))
1125 (isearch--set-state (car isearch-cmds)))
1127 (defun isearch-push-state ()
1128 (push (isearch--get-state) isearch-cmds))
1130 \f
1131 ;; Commands active while inside of the isearch minor mode.
1133 (defun isearch-exit ()
1134 "Exit search normally.
1135 However, if this is the first command after starting incremental
1136 search and `search-nonincremental-instead' is non-nil, do a
1137 nonincremental search instead via `isearch-edit-string'."
1138 (interactive)
1139 (if (and search-nonincremental-instead
1140 (= 0 (length isearch-string)))
1141 (let ((isearch-nonincremental t))
1142 (isearch-edit-string)))
1143 (isearch-done)
1144 (isearch-clean-overlays))
1146 (defvar minibuffer-history-symbol) ;; from external package gmhist.el
1148 (defun isearch-fail-pos (&optional msg)
1149 "Return position of first mismatch in search string, or nil if none.
1150 If MSG is non-nil, use variable `isearch-message', otherwise `isearch-string'."
1151 (let ((cmds isearch-cmds)
1152 (curr-msg (if msg isearch-message isearch-string))
1153 succ-msg)
1154 (when (or (not isearch-success) isearch-error)
1155 (while (and cmds
1156 (or (not (isearch--state-success (car cmds)))
1157 (isearch--state-error (car cmds))))
1158 (pop cmds))
1159 (setq succ-msg (and cmds (if msg (isearch--state-message (car cmds))
1160 (isearch--state-string (car cmds)))))
1161 (if (and (stringp succ-msg)
1162 (< (length succ-msg) (length curr-msg))
1163 (equal succ-msg
1164 (substring curr-msg 0 (length succ-msg))))
1165 (length succ-msg)
1166 0))))
1168 (defmacro with-isearch-suspended (&rest body)
1169 "Exit Isearch mode, run BODY, and reinvoke the pending search.
1170 You can update the global isearch variables by setting new values to
1171 `isearch-new-string', `isearch-new-message', `isearch-new-forward',
1172 `isearch-new-word', `isearch-new-case-fold'."
1173 ;; This code is very hairy for several reasons, explained in the code.
1174 ;; Mainly, isearch-mode must be terminated while editing and then restarted.
1175 ;; If there were a way to catch any change of buffer from the minibuffer,
1176 ;; this could be simplified greatly.
1177 ;; Editing doesn't back up the search point. Should it?
1178 `(condition-case nil
1179 (progn
1180 (let ((isearch-nonincremental isearch-nonincremental)
1182 ;; Locally bind all isearch global variables to protect them
1183 ;; from recursive isearching.
1184 ;; isearch-string -message and -forward are not bound
1185 ;; so they may be changed. Instead, save the values.
1186 (isearch-new-string isearch-string)
1187 (isearch-new-message isearch-message)
1188 (isearch-new-forward isearch-forward)
1189 (isearch-new-word isearch-word)
1190 (isearch-new-case-fold isearch-case-fold-search)
1192 (isearch-regexp isearch-regexp)
1193 (isearch-op-fun isearch-op-fun)
1194 (isearch-cmds isearch-cmds)
1195 (isearch-success isearch-success)
1196 (isearch-wrapped isearch-wrapped)
1197 (isearch-barrier isearch-barrier)
1198 (isearch-adjusted isearch-adjusted)
1199 (isearch-yank-flag isearch-yank-flag)
1200 (isearch-error isearch-error)
1201 ;;; Don't bind this. We want isearch-search, below, to set it.
1202 ;;; And the old value won't matter after that.
1203 ;;; (isearch-other-end isearch-other-end)
1204 ;;; Perhaps some of these other variables should be bound for a
1205 ;;; shorter period, ending before the next isearch-search.
1206 ;;; But there doesn't seem to be a real bug, so let's not risk it now.
1207 (isearch-opoint isearch-opoint)
1208 (isearch-slow-terminal-mode isearch-slow-terminal-mode)
1209 (isearch-small-window isearch-small-window)
1210 (isearch-recursive-edit isearch-recursive-edit)
1211 ;; Save current configuration so we can restore it here.
1212 (isearch-window-configuration (current-window-configuration))
1214 ;; This could protect the index of the search rings,
1215 ;; but we can't reliably count the number of typed M-p
1216 ;; in `read-from-minibuffer' to adjust the index accordingly.
1217 ;; So when the following is commented out, `isearch-mode'
1218 ;; below resets the index to the predictable value nil.
1219 ;; (search-ring-yank-pointer search-ring-yank-pointer)
1220 ;; (regexp-search-ring-yank-pointer regexp-search-ring-yank-pointer)
1222 ;; Temporarily restore `minibuffer-message-timeout'.
1223 (minibuffer-message-timeout
1224 isearch-original-minibuffer-message-timeout)
1225 (isearch-original-minibuffer-message-timeout
1226 isearch-original-minibuffer-message-timeout)
1227 old-point old-other-end)
1229 ;; Actually terminate isearching until editing is done.
1230 ;; This is so that the user can do anything without failure,
1231 ;; like switch buffers and start another isearch, and return.
1232 (condition-case nil
1233 (isearch-done t t)
1234 (exit nil)) ; was recursive editing
1236 ;; Save old point and isearch-other-end before reading from minibuffer
1237 ;; that can change their values.
1238 (setq old-point (point) old-other-end isearch-other-end)
1240 (unwind-protect
1241 (progn ,@body)
1243 ;; Set point at the start (end) of old match if forward (backward),
1244 ;; so after exiting minibuffer isearch resumes at the start (end)
1245 ;; of this match and can find it again.
1246 (if (and old-other-end (eq old-point (point))
1247 (eq isearch-forward isearch-new-forward))
1248 (goto-char old-other-end))
1250 ;; Always resume isearching by restarting it.
1251 (isearch-mode isearch-forward
1252 isearch-regexp
1253 isearch-op-fun
1254 nil
1255 isearch-word)
1257 ;; Copy new local values to isearch globals
1258 (setq isearch-string isearch-new-string
1259 isearch-message isearch-new-message
1260 isearch-forward isearch-new-forward
1261 isearch-word isearch-new-word
1262 isearch-case-fold-search isearch-new-case-fold))
1264 ;; Empty isearch-string means use default.
1265 (when (= 0 (length isearch-string))
1266 (setq isearch-string (or (car (if isearch-regexp
1267 regexp-search-ring
1268 search-ring))
1269 "")
1271 isearch-message
1272 (mapconcat 'isearch-text-char-description
1273 isearch-string ""))
1274 ;; After taking the last element, adjust ring to previous one.
1275 (isearch-ring-adjust1 nil)))
1277 ;; This used to push the state as of before this C-s, but it adds
1278 ;; an inconsistent state where part of variables are from the
1279 ;; previous search (e.g. `isearch-success'), and part of variables
1280 ;; are just entered from the minibuffer (e.g. `isearch-string').
1281 ;; (isearch-push-state)
1283 ;; Reinvoke the pending search.
1284 (isearch-search)
1285 (isearch-push-state) ; this pushes the correct state
1286 (isearch-update)
1287 (if isearch-nonincremental
1288 (progn
1289 ;; (sit-for 1) ;; needed if isearch-done does: (message "")
1290 (isearch-done)
1291 ;; The search done message is confusing when the string
1292 ;; is empty, so erase it.
1293 (if (equal isearch-string "")
1294 (message "")))))
1296 (quit ; handle abort-recursive-edit
1297 (isearch-abort) ;; outside of let to restore outside global values
1298 )))
1300 (defun isearch-edit-string ()
1301 "Edit the search string in the minibuffer.
1302 The following additional command keys are active while editing.
1308 (interactive)
1309 (with-isearch-suspended
1310 (let* ((message-log-max nil)
1311 ;; Don't add a new search string to the search ring here
1312 ;; in `read-from-minibuffer'. It should be added only
1313 ;; by `isearch-update-ring' called from `isearch-done'.
1314 (history-add-new-input nil)
1315 ;; Binding minibuffer-history-symbol to nil is a work-around
1316 ;; for some incompatibility with gmhist.
1317 (minibuffer-history-symbol))
1318 (setq isearch-new-string
1319 (read-from-minibuffer
1320 (isearch-message-prefix nil isearch-nonincremental)
1321 (cons isearch-string (1+ (or (isearch-fail-pos)
1322 (length isearch-string))))
1323 minibuffer-local-isearch-map nil
1324 (if isearch-regexp
1325 (cons 'regexp-search-ring
1326 (1+ (or regexp-search-ring-yank-pointer -1)))
1327 (cons 'search-ring
1328 (1+ (or search-ring-yank-pointer -1))))
1329 nil t)
1330 isearch-new-message
1331 (mapconcat 'isearch-text-char-description
1332 isearch-new-string "")))))
1334 (defun isearch-nonincremental-exit-minibuffer ()
1335 (interactive)
1336 (setq isearch-nonincremental t)
1337 (exit-minibuffer))
1338 ;; Changing the value of `isearch-nonincremental' has no effect here,
1339 ;; because `isearch-edit-string' ignores this change. Thus marked as obsolete.
1340 (make-obsolete 'isearch-nonincremental-exit-minibuffer 'exit-minibuffer "24.4")
1342 (defun isearch-forward-exit-minibuffer ()
1343 "Resume isearching forward from the minibuffer that edits the search string."
1344 (interactive)
1345 (setq isearch-new-forward t)
1346 (exit-minibuffer))
1348 (defun isearch-reverse-exit-minibuffer ()
1349 "Resume isearching backward from the minibuffer that edits the search string."
1350 (interactive)
1351 (setq isearch-new-forward nil)
1352 (exit-minibuffer))
1354 (defun isearch-cancel ()
1355 "Terminate the search and go back to the starting point."
1356 (interactive)
1357 (if (and isearch-push-state-function isearch-cmds)
1358 ;; For defined push-state function, restore the first state.
1359 ;; This calls pop-state function and restores original point.
1360 (let ((isearch-cmds (last isearch-cmds)))
1361 (isearch--set-state (car isearch-cmds)))
1362 (goto-char isearch-opoint))
1363 (isearch-done t) ; Exit isearch..
1364 (isearch-clean-overlays)
1365 (signal 'quit nil)) ; ..and pass on quit signal.
1367 (defun isearch-abort ()
1368 "Abort incremental search mode if searching is successful, signaling quit.
1369 Otherwise, revert to previous successful search and continue searching.
1370 Use `isearch-exit' to quit without signaling."
1371 (interactive)
1372 ;; (ding) signal instead below, if quitting
1373 (discard-input)
1374 (if (and isearch-success (not isearch-error))
1375 ;; If search is successful and has no incomplete regexp,
1376 ;; move back to starting point and really do quit.
1377 (progn
1378 (setq isearch-success nil)
1379 (isearch-cancel))
1380 ;; If search is failing, or has an incomplete regexp,
1381 ;; rub out until it is once more successful.
1382 (while (or (not isearch-success) isearch-error)
1383 (isearch-pop-state))
1384 (isearch-update)))
1386 (defun isearch-repeat (direction)
1387 ;; Utility for isearch-repeat-forward and -backward.
1388 (if (eq isearch-forward (eq direction 'forward))
1389 ;; C-s in forward or C-r in reverse.
1390 (if (equal isearch-string "")
1391 ;; If search string is empty, use last one.
1392 (if (null (if isearch-regexp regexp-search-ring search-ring))
1393 (setq isearch-error "No previous search string")
1394 (setq isearch-string
1395 (car (if isearch-regexp regexp-search-ring search-ring))
1396 isearch-message
1397 (mapconcat 'isearch-text-char-description
1398 isearch-string "")
1399 isearch-case-fold-search isearch-last-case-fold-search)
1400 ;; After taking the last element, adjust ring to previous one.
1401 (isearch-ring-adjust1 nil))
1402 ;; If already have what to search for, repeat it.
1403 (or isearch-success
1404 (progn
1405 ;; Set isearch-wrapped before calling isearch-wrap-function
1406 (setq isearch-wrapped t)
1407 (if isearch-wrap-function
1408 (funcall isearch-wrap-function)
1409 (goto-char (if isearch-forward (point-min) (point-max)))))))
1410 ;; C-s in reverse or C-r in forward, change direction.
1411 (setq isearch-forward (not isearch-forward)
1412 isearch-success t))
1414 (setq isearch-barrier (point)) ; For subsequent \| if regexp.
1416 (if (equal isearch-string "")
1417 (setq isearch-success t)
1418 (if (and isearch-success
1419 (equal (point) isearch-other-end)
1420 (not isearch-just-started))
1421 ;; If repeating a search that found
1422 ;; an empty string, ensure we advance.
1423 (if (if isearch-forward (eobp) (bobp))
1424 ;; If there's nowhere to advance to, fail (and wrap next time).
1425 (progn
1426 (setq isearch-success nil)
1427 (ding))
1428 (forward-char (if isearch-forward 1 -1))
1429 (isearch-search))
1430 (isearch-search)))
1432 (isearch-push-state)
1433 (isearch-update))
1435 (defun isearch-repeat-forward ()
1436 "Repeat incremental search forwards."
1437 (interactive)
1438 (isearch-repeat 'forward))
1440 (defun isearch-repeat-backward ()
1441 "Repeat incremental search backwards."
1442 (interactive)
1443 (isearch-repeat 'backward))
1445 (defun isearch-toggle-regexp ()
1446 "Toggle regexp searching on or off."
1447 ;; The status stack is left unchanged.
1448 (interactive)
1449 (setq isearch-regexp (not isearch-regexp))
1450 (if isearch-regexp (setq isearch-word nil))
1451 (setq isearch-success t isearch-adjusted t)
1452 (isearch-update))
1454 (defun isearch-toggle-word ()
1455 "Toggle word searching on or off."
1456 ;; The status stack is left unchanged.
1457 (interactive)
1458 (setq isearch-word (not isearch-word))
1459 (if isearch-word (setq isearch-regexp nil))
1460 (setq isearch-success t isearch-adjusted t)
1461 (isearch-update))
1463 (defun isearch-toggle-symbol ()
1464 "Toggle symbol searching on or off."
1465 (interactive)
1466 (setq isearch-word (unless (eq isearch-word 'isearch-symbol-regexp)
1467 'isearch-symbol-regexp))
1468 (if isearch-word (setq isearch-regexp nil))
1469 (setq isearch-success t isearch-adjusted t)
1470 (isearch-update))
1472 (defun isearch-toggle-lax-whitespace ()
1473 "Toggle whitespace matching in searching on or off.
1474 In ordinary search, toggles the value of the variable
1475 `isearch-lax-whitespace'. In regexp search, toggles the
1476 value of the variable `isearch-regexp-lax-whitespace'."
1477 (interactive)
1478 (if isearch-regexp
1479 (setq isearch-regexp-lax-whitespace (not isearch-regexp-lax-whitespace))
1480 (setq isearch-lax-whitespace (not isearch-lax-whitespace)))
1481 (let ((message-log-max nil))
1482 (message "%s%s [%s]"
1483 (isearch-message-prefix nil isearch-nonincremental)
1484 isearch-message
1485 (if (if isearch-regexp
1486 isearch-regexp-lax-whitespace
1487 isearch-lax-whitespace)
1488 "match spaces loosely"
1489 "match spaces literally")))
1490 (setq isearch-success t isearch-adjusted t)
1491 (sit-for 1)
1492 (isearch-update))
1494 (defun isearch-toggle-case-fold ()
1495 "Toggle case folding in searching on or off.
1496 Toggles the value of the variable `isearch-case-fold-search'."
1497 (interactive)
1498 (setq isearch-case-fold-search
1499 (if isearch-case-fold-search nil 'yes))
1500 (let ((message-log-max nil))
1501 (message "%s%s [case %ssensitive]"
1502 (isearch-message-prefix nil isearch-nonincremental)
1503 isearch-message
1504 (if isearch-case-fold-search "in" "")))
1505 (setq isearch-success t isearch-adjusted t)
1506 (sit-for 1)
1507 (isearch-update))
1509 (defun isearch-toggle-invisible ()
1510 "Toggle searching in invisible text on or off.
1511 Toggles the variable `isearch-invisible' between values
1512 nil and a non-nil value of the option `search-invisible'
1513 \(or `open' if `search-invisible' is nil)."
1514 (interactive)
1515 (setq isearch-invisible
1516 (if isearch-invisible nil (or search-invisible 'open)))
1517 (let ((message-log-max nil))
1518 (message "%s%s [match %svisible text]"
1519 (isearch-message-prefix nil isearch-nonincremental)
1520 isearch-message
1521 (if isearch-invisible "in" "")))
1522 (setq isearch-success t isearch-adjusted t)
1523 (sit-for 1)
1524 (isearch-update))
1526 \f
1527 ;; Word search
1529 (defun word-search-regexp (string &optional lax)
1530 "Return a regexp which matches words, ignoring punctuation.
1531 Given STRING, a string of words separated by word delimiters,
1532 compute a regexp that matches those exact words separated by
1533 arbitrary punctuation. If the string begins or ends in whitespace,
1534 the beginning or the end of the string matches arbitrary whitespace.
1535 Otherwise if LAX is non-nil, the beginning or the end of the string
1536 need not match a word boundary.
1538 Used in `word-search-forward', `word-search-backward',
1539 `word-search-forward-lax', `word-search-backward-lax'."
1540 (cond
1541 ((equal string "") "")
1543 (t (concat
1550 (defun word-search-backward (string &optional bound noerror count)
1551 "Search backward from point for STRING, ignoring differences in punctuation.
1552 Set point to the beginning of the occurrence found, and return point.
1553 An optional second argument bounds the search; it is a buffer position.
1554 The match found must not extend before that position.
1555 Optional third argument, if t, means if fail just return nil (no error).
1556 If not nil and not t, move to limit of search and return nil.
1557 Optional fourth argument is repeat count--search for successive occurrences.
1559 Relies on the function `word-search-regexp' to convert a sequence
1560 of words in STRING to a regexp used to search words without regard
1561 to punctuation."
1562 (interactive "sWord search backward: ")
1563 (re-search-backward (word-search-regexp string nil) bound noerror count))
1565 (defun word-search-forward (string &optional bound noerror count)
1566 "Search forward from point for STRING, ignoring differences in punctuation.
1567 Set point to the end of the occurrence found, and return point.
1568 An optional second argument bounds the search; it is a buffer position.
1569 The match found must not extend after that position.
1570 Optional third argument, if t, means if fail just return nil (no error).
1571 If not nil and not t, move to limit of search and return nil.
1572 Optional fourth argument is repeat count--search for successive occurrences.
1574 Relies on the function `word-search-regexp' to convert a sequence
1575 of words in STRING to a regexp used to search words without regard
1576 to punctuation."
1577 (interactive "sWord search: ")
1578 (re-search-forward (word-search-regexp string nil) bound noerror count))
1580 (defun word-search-backward-lax (string &optional bound noerror count)
1581 "Search backward from point for STRING, ignoring differences in punctuation.
1582 Set point to the beginning of the occurrence found, and return point.
1584 Unlike `word-search-backward', the end of STRING need not match a word
1585 boundary, unless STRING ends in whitespace.
1587 An optional second argument bounds the search; it is a buffer position.
1588 The match found must not extend before that position.
1589 Optional third argument, if t, means if fail just return nil (no error).
1590 If not nil and not t, move to limit of search and return nil.
1591 Optional fourth argument is repeat count--search for successive occurrences.
1593 Relies on the function `word-search-regexp' to convert a sequence
1594 of words in STRING to a regexp used to search words without regard
1595 to punctuation."
1596 (interactive "sWord search backward: ")
1597 (re-search-backward (word-search-regexp string t) bound noerror count))
1599 (defun word-search-forward-lax (string &optional bound noerror count)
1600 "Search forward from point for STRING, ignoring differences in punctuation.
1601 Set point to the end of the occurrence found, and return point.
1603 Unlike `word-search-forward', the end of STRING need not match a word
1604 boundary, unless STRING ends in whitespace.
1606 An optional second argument bounds the search; it is a buffer position.
1607 The match found must not extend after that position.
1608 Optional third argument, if t, means if fail just return nil (no error).
1609 If not nil and not t, move to limit of search and return nil.
1610 Optional fourth argument is repeat count--search for successive occurrences.
1612 Relies on the function `word-search-regexp' to convert a sequence
1613 of words in STRING to a regexp used to search words without regard
1614 to punctuation."
1615 (interactive "sWord search: ")
1616 (re-search-forward (word-search-regexp string t) bound noerror count))
1618 ;; Symbol search
1620 (defun isearch-symbol-regexp (string &optional lax)
1621 "Return a regexp which matches STRING as a symbol.
1623 If there are more than one symbol, then compute a regexp that matches
1624 those exact symbols separated by non-symbol characters. If the string
1625 begins or ends in whitespace, the beginning or the end of the string
1626 matches arbitrary non-symbol whitespace. Otherwise if LAX is non-nil,
1627 the beginning or the end of the string need not match a symbol boundary."
1628 (let ((not-word-symbol-re
1629 ;; This regexp matches all syntaxes except word and symbol syntax.
1630 ;; FIXME: Replace it with something shorter if possible (bug#14602).
1631 "\\(?:\\s-\\|\\s.\\|\\s(\\|\\s)\\|\\s\"\\|\\s\\\\|\\s/\\|\\s$\\|\\s'\\|\\s<\\|\\s>\\|\\s@\\|\\s!\\|\\s|\\)+"))
1632 (cond
1633 ((equal string "") "")
1635 (t (concat
1638 (mapconcat 'regexp-quote (split-string string not-word-symbol-re t) not-word-symbol-re)
1642 (put 'isearch-symbol-regexp 'isearch-message-prefix "symbol ")
1644 ;; Search with lax whitespace
1646 (defun search-forward-lax-whitespace (string &optional bound noerror count)
1647 "Search forward for STRING, matching a sequence of whitespace chars."
1648 (let ((search-spaces-regexp search-whitespace-regexp))
1649 (re-search-forward (regexp-quote string) bound noerror count)))
1651 (defun search-backward-lax-whitespace (string &optional bound noerror count)
1652 "Search backward for STRING, matching a sequence of whitespace chars."
1653 (let ((search-spaces-regexp search-whitespace-regexp))
1654 (re-search-backward (regexp-quote string) bound noerror count)))
1656 (defun re-search-forward-lax-whitespace (regexp &optional bound noerror count)
1657 "Search forward for REGEXP, matching a sequence of whitespace chars."
1658 (let ((search-spaces-regexp search-whitespace-regexp))
1659 (re-search-forward regexp bound noerror count)))
1661 (defun re-search-backward-lax-whitespace (regexp &optional bound noerror count)
1662 "Search backward for REGEXP, matching a sequence of whitespace chars."
1663 (let ((search-spaces-regexp search-whitespace-regexp))
1664 (re-search-backward regexp bound noerror count)))
1666 \f
1667 (defun isearch-query-replace (&optional delimited regexp-flag)
1668 "Start `query-replace' with string to replace from last search string.
1669 The arg DELIMITED (prefix arg if interactive), if non-nil, means replace
1670 only matches surrounded by word boundaries. Note that using the prefix arg
1671 is possible only when `isearch-allow-scroll' is non-nil or
1672 `isearch-allow-prefix' is non-nil, and it doesn't always provide the
1673 correct matches for `query-replace', so the preferred way to run word
1674 replacements from Isearch is `M-s w ... M-%'."
1675 (interactive
1676 (list current-prefix-arg))
1677 (barf-if-buffer-read-only)
1678 (if regexp-flag (setq isearch-regexp t))
1679 (let ((case-fold-search isearch-case-fold-search)
1680 ;; set `search-upper-case' to nil to not call
1681 ;; `isearch-no-upper-case-p' in `perform-replace'
1682 (search-upper-case nil)
1683 (search-invisible isearch-invisible)
1684 (replace-lax-whitespace
1685 isearch-lax-whitespace)
1686 (replace-regexp-lax-whitespace
1687 isearch-regexp-lax-whitespace)
1688 ;; Set `isearch-recursive-edit' to nil to prevent calling
1689 ;; `exit-recursive-edit' in `isearch-done' that terminates
1690 ;; the execution of this command when it is non-nil.
1691 ;; We call `exit-recursive-edit' explicitly at the end below.
1692 (isearch-recursive-edit nil))
1693 (isearch-done nil t)
1694 (isearch-clean-overlays)
1695 (if (and isearch-other-end
1696 (< isearch-other-end (point))
1697 (not (and transient-mark-mode mark-active
1698 (< (mark) (point)))))
1699 (goto-char isearch-other-end))
1700 (set query-replace-from-history-variable
1701 (cons isearch-string
1702 (symbol-value query-replace-from-history-variable)))
1703 (perform-replace
1704 isearch-string
1705 (query-replace-read-to
1706 isearch-string
1707 (concat "Query replace"
1708 (if (or delimited isearch-word)
1709 (let* ((symbol (or delimited isearch-word))
1710 (string (and symbol (symbolp symbol)
1711 (get symbol 'isearch-message-prefix))))
1712 (if (stringp string)
1713 ;; Move space from the end to the beginning.
1715 " word"))
1716 "")
1717 (if isearch-regexp " regexp" "")
1718 (if (and transient-mark-mode mark-active) " in region" ""))
1719 isearch-regexp)
1720 t isearch-regexp (or delimited isearch-word) nil nil
1721 (if (and transient-mark-mode mark-active) (region-beginning))
1722 (if (and transient-mark-mode mark-active) (region-end))))
1723 (and isearch-recursive-edit (exit-recursive-edit)))
1725 (defun isearch-query-replace-regexp (&optional delimited)
1726 "Start `query-replace-regexp' with string to replace from last search string.
1727 See `isearch-query-replace' for more information."
1728 (interactive
1729 (list current-prefix-arg))
1730 (isearch-query-replace delimited t))
1732 (defun isearch-occur (regexp &optional nlines)
1733 "Run `occur' using the last search string as the regexp.
1734 Interactively, REGEXP is constructed using the search string from the
1735 last search command. NLINES has the same meaning as in `occur'.
1737 If the last search command was a word search, REGEXP is computed from
1738 the search words, ignoring punctuation. If the last search
1739 command was a regular expression search, REGEXP is the regular
1740 expression used in that search. If the last search command searched
1741 for a literal string, REGEXP is constructed by quoting all the special
1742 characters in that string."
1743 (interactive
1744 (let* ((perform-collect (consp current-prefix-arg))
1745 (regexp (cond
1746 ((functionp isearch-word)
1747 (funcall isearch-word isearch-string))
1748 (isearch-word (word-search-regexp isearch-string))
1749 (isearch-regexp isearch-string)
1750 (t (regexp-quote isearch-string)))))
1751 (list regexp
1752 (if perform-collect
1753 ;; Perform collect operation
1754 (if (zerop (regexp-opt-depth regexp))
1755 ;; No subexpression so collect the entire match.
1757 ;; Get the regexp for collection pattern.
1758 (let ((default (car occur-collect-regexp-history))
1759 regexp-collect)
1760 (with-isearch-suspended
1761 (setq regexp-collect
1762 (read-regexp
1763 (format "Regexp to collect (default %s): " default)
1764 default 'occur-collect-regexp-history)))
1765 regexp-collect))
1766 ;; Otherwise normal occur takes numerical prefix argument.
1767 (when current-prefix-arg
1768 (prefix-numeric-value current-prefix-arg))))))
1769 (let ((case-fold-search isearch-case-fold-search)
1770 ;; Set `search-upper-case' to nil to not call
1771 ;; `isearch-no-upper-case-p' in `occur-1'.
1772 (search-upper-case nil)
1773 (search-spaces-regexp
1774 (if (if isearch-regexp
1775 isearch-regexp-lax-whitespace
1776 isearch-lax-whitespace)
1777 search-whitespace-regexp)))
1778 (occur regexp nlines)))
1780 (declare-function hi-lock-read-face-name "hi-lock" ())
1782 (defun isearch-highlight-regexp ()
1783 "Run `highlight-regexp' with regexp from the current search string.
1784 It exits Isearch mode and calls `hi-lock-face-buffer' with its regexp
1785 argument from the last search regexp or a quoted search string,
1786 and reads its face argument using `hi-lock-read-face-name'."
1787 (interactive)
1788 (let (
1789 ;; Set `isearch-recursive-edit' to nil to prevent calling
1790 ;; `exit-recursive-edit' in `isearch-done' that terminates
1791 ;; the execution of this command when it is non-nil.
1792 ;; We call `exit-recursive-edit' explicitly at the end below.
1793 (isearch-recursive-edit nil))
1794 (isearch-done nil t)
1795 (isearch-clean-overlays))
1796 (require 'hi-lock nil t)
1797 (let ((regexp (cond ((functionp isearch-word)
1798 (funcall isearch-word isearch-string))
1799 (isearch-word (word-search-regexp isearch-string))
1800 (isearch-regexp isearch-string)
1801 ((if (and (eq isearch-case-fold-search t)
1802 search-upper-case)
1803 (isearch-no-upper-case-p
1804 isearch-string isearch-regexp)
1805 isearch-case-fold-search)
1806 ;; Turn isearch-string into a case-insensitive
1807 ;; regexp.
1808 (mapconcat
1809 (lambda (c)
1810 (let ((s (string c)))
1811 (if (string-match "[[:alpha:]]" s)
1812 (format "[%s%s]" (upcase s) (downcase s))
1813 (regexp-quote s))))
1814 isearch-string ""))
1815 (t (regexp-quote isearch-string)))))
1816 (hi-lock-face-buffer regexp (hi-lock-read-face-name)))
1817 (and isearch-recursive-edit (exit-recursive-edit)))
1819 \f
1820 (defun isearch-delete-char ()
1821 "Discard last input item and move point back.
1822 Last input means the last character or the last isearch command
1823 that added or deleted characters from the search string,
1824 moved point, toggled regexp mode or case-sensitivity, etc.
1825 If no previous match was done, just beep."
1826 (interactive)
1827 (if (null (cdr isearch-cmds))
1828 (ding)
1829 (isearch-pop-state))
1830 (isearch-update))
1832 (defun isearch-del-char (&optional arg)
1833 "Delete character from end of search string and search again.
1834 Unlike `isearch-delete-char', it only deletes the last character,
1835 but doesn't cancel the effect of other isearch command.
1836 If search string is empty, just beep."
1837 (interactive "p")
1838 (if (= 0 (length isearch-string))
1839 (ding)
1840 (setq isearch-string (substring isearch-string 0
1841 (- (min (or arg 1)
1842 (length isearch-string))))
1843 isearch-message (mapconcat 'isearch-text-char-description
1844 isearch-string "")))
1845 ;; Use the isearch-other-end as new starting point to be able
1846 ;; to find the remaining part of the search string again.
1847 ;; This is like what `isearch-search-and-update' does,
1848 ;; but currently it doesn't support deletion of characters
1849 ;; for the case where unsuccessful search may become successful
1850 ;; by deletion of characters.
1851 (if isearch-other-end (goto-char isearch-other-end))
1852 (isearch-search)
1853 (isearch-push-state)
1854 (isearch-update))
1856 (defun isearch-yank-string (string)
1857 "Pull STRING into search string."
1858 ;; Downcase the string if not supposed to case-fold yanked strings.
1859 (if (and isearch-case-fold-search
1860 (eq 'not-yanks search-upper-case))
1861 (setq string (downcase string)))
1862 (if isearch-regexp (setq string (regexp-quote string)))
1863 ;; Don't move cursor in reverse search.
1864 (setq isearch-yank-flag t)
1865 (isearch-process-search-string
1866 string (mapconcat 'isearch-text-char-description string "")))
1868 (defun isearch-yank-kill ()
1869 "Pull string from kill ring into search string."
1870 (interactive)
1871 (isearch-yank-string (current-kill 0)))
1873 (defun isearch-yank-pop ()
1874 "Replace just-yanked search string with previously killed string."
1875 (interactive)
1876 (if (not (memq last-command '(isearch-yank-kill isearch-yank-pop)))
1877 ;; Fall back on `isearch-yank-kill' for the benefits of people
1878 ;; who are used to the old behavior of `M-y' in isearch mode. In
1879 ;; future, this fallback may be changed if we ever change
1880 ;; `yank-pop' to do something like the kill-ring-browser.
1881 (isearch-yank-kill)
1882 (isearch-pop-state)
1883 (isearch-yank-string (current-kill 1))))
1885 (defun isearch-yank-x-selection ()
1886 "Pull current X selection into search string."
1887 (interactive)
1888 (isearch-yank-string (x-get-selection))
1889 ;; If `x-get-selection' returned the text from the active region,
1890 ;; then it "used" the mark which we should hence deactivate.
1891 (when select-active-regions (deactivate-mark)))
1894 (defun isearch-mouse-2 (click)
1895 "Handle mouse-2 in Isearch mode.
1896 For a click in the echo area, invoke `isearch-yank-x-selection'.
1897 Otherwise invoke whatever the calling mouse-2 command sequence
1898 is bound to outside of Isearch."
1899 (interactive "e")
1900 (let* ((w (posn-window (event-start click)))
1901 (overriding-terminal-local-map nil)
1902 (binding (key-binding (this-command-keys-vector) t)))
1903 (if (and (window-minibuffer-p w)
1904 (not (minibuffer-window-active-p w))) ; in echo area
1905 (isearch-yank-x-selection)
1906 (when (functionp binding)
1907 (call-interactively binding)))))
1909 (defun isearch-yank-internal (jumpform)
1910 "Pull the text from point to the point reached by JUMPFORM.
1911 JUMPFORM is a lambda expression that takes no arguments and returns
1912 a buffer position, possibly having moved point to that position.
1913 For example, it might move point forward by a word and return point,
1914 or it might return the position of the end of the line."
1915 (isearch-yank-string
1916 (save-excursion
1917 (and (not isearch-forward) isearch-other-end
1918 (goto-char isearch-other-end))
1919 (buffer-substring-no-properties (point) (funcall jumpform)))))
1921 (defun isearch-yank-char-in-minibuffer (&optional arg)
1922 "Pull next character from buffer into end of search string in minibuffer."
1923 (interactive "p")
1924 (if (eobp)
1925 (insert
1926 (with-current-buffer (cadr (buffer-list))
1927 (buffer-substring-no-properties
1928 (point) (progn (forward-char arg) (point)))))
1929 (forward-char arg)))
1931 (defun isearch-yank-char (&optional arg)
1932 "Pull next character from buffer into search string."
1933 (interactive "p")
1934 (isearch-yank-internal (lambda () (forward-char arg) (point))))
1936 (declare-function subword-forward "subword" (&optional arg))
1937 (defun isearch-yank-word-or-char ()
1938 "Pull next character, subword or word from buffer into search string.
1939 Subword is used when `subword-mode' is activated. "
1940 (interactive)
1941 (isearch-yank-internal
1942 (lambda ()
1943 (if (or (= (char-syntax (or (char-after) 0)) ?w)
1944 (= (char-syntax (or (char-after (1+ (point))) 0)) ?w))
1945 (if (and (boundp 'subword-mode) subword-mode)
1946 (subword-forward 1)
1947 (forward-word 1))
1948 (forward-char 1)) (point))))
1950 (defun isearch-yank-word (&optional arg)
1951 "Pull next word from buffer into search string."
1952 (interactive "p")
1953 (isearch-yank-internal (lambda () (forward-word arg) (point))))
1955 (defun isearch-yank-line (&optional arg)
1956 "Pull rest of line from buffer into search string."
1957 (interactive "p")
1958 (isearch-yank-internal
1959 (lambda () (let ((inhibit-field-text-motion t))
1960 (line-end-position (if (eolp) (1+ arg) arg))))))
1962 (defun isearch-char-by-name (&optional count)
1963 "Read a character by its Unicode name and add it to the search string.
1964 Completion is available like in `read-char-by-name' used by `insert-char'.
1965 With argument, add COUNT copies of the character."
1966 (interactive "p")
1967 (with-isearch-suspended
1968 (let ((char (read-char-by-name "Add character to search (Unicode name or hex): ")))
1969 (when char
1970 (let ((string (if (and (integerp count) (> count 1))
1971 (make-string count char)
1972 (char-to-string char))))
1973 (setq isearch-new-string (concat isearch-string string)
1974 isearch-new-message (concat isearch-message
1975 (mapconcat 'isearch-text-char-description
1976 string ""))))))))
1978 (defun isearch-search-and-update ()
1979 ;; Do the search and update the display.
1980 (when (or isearch-success
1981 ;; Unsuccessful regexp search may become successful by
1982 ;; addition of characters which make isearch-string valid
1983 isearch-regexp
1984 ;; If the string was found but was completely invisible,
1985 ;; it might now be partly visible, so try again.
1986 (prog1 isearch-hidden (setq isearch-hidden nil)))
1987 ;; In reverse search, adding stuff at
1988 ;; the end may cause zero or many more chars to be
1989 ;; matched, in the string following point.
1990 ;; Allow all those possibilities without moving point as
1991 ;; long as the match does not extend past search origin.
1992 (if (and (not isearch-forward) (not isearch-adjusted)
1993 (condition-case ()
1994 (let ((case-fold-search isearch-case-fold-search))
1995 (if (and (eq case-fold-search t) search-upper-case)
1996 (setq case-fold-search
1997 (isearch-no-upper-case-p isearch-string isearch-regexp)))
1998 (looking-at (cond
1999 ((functionp isearch-word)
2000 (funcall isearch-word isearch-string t))
2001 (isearch-word (word-search-regexp isearch-string t))
2002 (isearch-regexp isearch-string)
2003 (t (regexp-quote isearch-string)))))
2004 (error nil))
2005 (or isearch-yank-flag
2006 (<= (match-end 0)
2007 (min isearch-opoint isearch-barrier))))
2008 (progn
2009 (setq isearch-success t
2010 isearch-error nil
2011 isearch-other-end (match-end 0))
2012 (if (and (eq isearch-case-fold-search t) search-upper-case)
2013 (setq isearch-case-fold-search
2014 (isearch-no-upper-case-p isearch-string isearch-regexp))))
2015 ;; Not regexp, not reverse, or no match at point.
2016 (if (and isearch-other-end (not isearch-adjusted))
2017 (goto-char (if isearch-forward isearch-other-end
2018 (min isearch-opoint
2019 isearch-barrier
2020 (1+ isearch-other-end)))))
2021 (isearch-search)
2022 ))
2023 (isearch-push-state)
2024 (if isearch-op-fun (funcall isearch-op-fun))
2025 (isearch-update))
2028 ;; *, ?, }, and | chars can make a regexp more liberal.
2029 ;; They can make a regexp match sooner or make it succeed instead of failing.
2030 ;; So go back to place last successful search started
2031 ;; or to the last ^S/^R (barrier), whichever is nearer.
2032 ;; + needs no special handling because the string must match at least once.
2034 (defun isearch-backslash (str)
2035 "Return t if STR ends in an odd number of backslashes."
2038 (defun isearch-fallback (want-backslash &optional allow-invalid to-barrier)
2039 "Return point to previous successful match to allow regexp liberalization.
2042 stopping at `isearch-barrier' as needed.
2044 Do nothing if a backslash is escaping the liberalizing character.
2047 Do nothing if regexp has recently been invalid unless optional
2048 ALLOW-INVALID non-nil.
2050 If optional TO-BARRIER non-nil, ignore previous matches and go exactly
2051 to the barrier."
2052 ;; (eq (not a) (not b)) makes all non-nil values equivalent
2053 (when (and isearch-regexp (eq (not (isearch-backslash isearch-string))
2054 (not want-backslash))
2055 ;; We have to check 2 stack frames because the last might be
2056 ;; invalid just because of a backslash.
2057 (or (not isearch-error)
2058 (not (isearch--state-error (cadr isearch-cmds)))
2059 allow-invalid))
2060 (if to-barrier
2061 (progn (goto-char isearch-barrier)
2062 (setq isearch-adjusted t))
2063 (let* ((stack isearch-cmds)
2064 (previous (cdr stack)) ; lookbelow in the stack
2065 (frame (car stack)))
2066 ;; Walk down the stack looking for a valid regexp (as of course only
2067 ;; they can be the previous successful match); this conveniently
2068 ;; removes all bracket-sets and groups that might be in the way, as
2069 ;; well as partial \{\} constructs that the code below leaves behind.
2070 ;; Also skip over postfix operators -- though horrid,
2071 ;; 'ab?\{5,6\}+\{1,2\}*' is perfectly valid.
2072 (while (and previous
2073 (or (isearch--state-error frame)
2074 (let* ((string (isearch--state-string frame))
2075 (lchar (aref string (1- (length string)))))
2076 ;; The operators aren't always operators; check
2077 ;; backslashes. This doesn't handle the case of
2078 ;; operators at the beginning of the regexp not
2079 ;; being special, but then we should fall back to
2080 ;; the barrier anyway because it's all optional.
2081 (if (isearch-backslash
2082 (isearch--state-string (car previous)))
2083 (eq lchar ?\})
2084 (memq lchar '(?* ?? ?+))))))
2085 (setq stack previous previous (cdr previous) frame (car stack)))
2086 (when stack
2087 ;; `stack' now refers the most recent valid regexp that is not at
2088 ;; all optional in its last term. Now dig one level deeper and find
2089 ;; what matched before that.
2090 (let ((last-other-end
2091 (or (and (car previous)
2092 (isearch--state-other-end (car previous)))
2093 isearch-barrier)))
2094 (goto-char (if isearch-forward
2095 (max last-other-end isearch-barrier)
2096 (min last-other-end isearch-barrier)))
2097 (setq isearch-adjusted t)))))))
2099 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
2100 ;; scrolling within Isearch mode. Alan Mackenzie (acm@muc.de), 2003/2/24
2101 ;;
2102 ;; The idea here is that certain vertical scrolling commands (like C-l
2103 ;; `recenter') should be usable WITHIN Isearch mode. For a command to be
2104 ;; suitable, it must NOT alter the buffer, swap to another buffer or frame,
2105 ;; tamper with isearch's state, or move point. It is unacceptable for the
2106 ;; search string to be scrolled out of the current window. If a command
2107 ;; attempts this, we scroll the text back again.
2108 ;;
2109 ;; We implement this feature with a property called `isearch-scroll'.
2110 ;; If a command's symbol has the value t for this property or for the
2111 ;; `scroll-command' property, it is a scrolling command. The feature
2112 ;; needs to be enabled by setting the customizable variable
2113 ;; `isearch-allow-scroll' to a non-nil value.
2114 ;;
2115 ;; The universal argument commands (e.g. C-u) in simple.el are marked
2116 ;; as scrolling commands, and isearch.el has been amended to allow
2117 ;; prefix arguments to be passed through to scrolling commands. Thus
2118 ;; M-0 C-l will scroll point to the top of the window.
2119 ;;
2120 ;; Horizontal scrolling commands are currently not catered for.
2121 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
2123 ;; Set the isearch-scroll property on some standard functions:
2124 ;; Scroll-bar functions:
2125 (if (fboundp 'scroll-bar-toolkit-scroll)
2126 (put 'scroll-bar-toolkit-scroll 'isearch-scroll t))
2127 (if (fboundp 'w32-handle-scroll-bar-event)
2128 (put 'w32-handle-scroll-bar-event 'isearch-scroll t))
2130 ;; Commands which scroll the window (some scroll commands
2131 ;; already have the `scroll-command' property on them):
2132 (put 'recenter 'isearch-scroll t)
2133 (put 'recenter-top-bottom 'isearch-scroll t)
2134 (put 'reposition-window 'isearch-scroll t)
2136 ;; Commands which act on the other window
2137 (put 'list-buffers 'isearch-scroll t)
2138 (put 'scroll-other-window 'isearch-scroll t)
2139 (put 'scroll-other-window-down 'isearch-scroll t)
2140 (put 'beginning-of-buffer-other-window 'isearch-scroll t)
2141 (put 'end-of-buffer-other-window 'isearch-scroll t)
2143 ;; Commands which change the window layout
2144 (put 'delete-other-windows 'isearch-scroll t)
2145 (put 'balance-windows 'isearch-scroll t)
2146 (put 'split-window-right 'isearch-scroll t)
2147 (put 'split-window-below 'isearch-scroll t)
2148 (put 'enlarge-window 'isearch-scroll t)
2150 ;; Aliases for split-window-*
2151 (put 'split-window-vertically 'isearch-scroll t)
2152 (put 'split-window-horizontally 'isearch-scroll t)
2154 ;; Universal argument commands
2155 (put 'universal-argument 'isearch-scroll t)
2156 (put 'negative-argument 'isearch-scroll t)
2157 (put 'digit-argument 'isearch-scroll t)
2159 (defcustom isearch-allow-scroll nil
2160 "Whether scrolling is allowed during incremental search.
2161 If non-nil, scrolling commands can be used in Isearch mode.
2162 However, the current match will never scroll offscreen.
2163 If nil, scrolling commands will first cancel Isearch mode."
2164 :type 'boolean
2165 :group 'isearch)
2167 (defcustom isearch-allow-prefix t
2168 "Whether prefix arguments are allowed during incremental search.
2169 If non-nil, entering a prefix argument will not terminate the
2170 search. This option is ignored \(presumed t) when
2171 `isearch-allow-scroll' is set."
2172 :version "24.4"
2173 :type 'boolean
2174 :group 'isearch)
2176 (defun isearch-string-out-of-window (isearch-point)
2177 "Test whether the search string is currently outside of the window.
2178 Return nil if it's completely visible, or if point is visible,
2179 together with as much of the search string as will fit; the symbol
2180 `above' if we need to scroll the text downwards; the symbol `below',
2181 if upwards."
2182 (let ((w-start (window-start))
2183 (w-end (window-end nil t))
2184 (w-L1 (save-excursion (move-to-window-line 1) (point)))
2185 (w-L-1 (save-excursion (move-to-window-line -1) (point)))
2186 start end) ; start and end of search string in buffer
2187 (if isearch-forward
2188 (setq end isearch-point start (or isearch-other-end isearch-point))
2189 (setq start isearch-point end (or isearch-other-end isearch-point)))
2190 (cond ((or (and (>= start w-start) (<= end w-end))
2191 (if isearch-forward
2192 (and (>= isearch-point w-L-1) (< isearch-point w-end)) ; point on Line -1
2193 (and (>= isearch-point w-start) (< isearch-point w-L1)))) ; point on Line 0
2194 nil)
2195 ((and (< start w-start)
2196 (< isearch-point w-L-1))
2197 'above)
2198 (t 'below))))
2200 (defun isearch-back-into-window (above isearch-point)
2201 "Scroll the window to bring the search string back into view.
2202 Restore point to ISEARCH-POINT in the process. ABOVE is t when the
2203 search string is above the top of the window, nil when it is beneath
2204 the bottom."
2205 (let (start end)
2206 (if isearch-forward
2207 (setq end isearch-point start (or isearch-other-end isearch-point))
2208 (setq start isearch-point end (or isearch-other-end isearch-point)))
2209 (if above
2210 (progn
2211 (goto-char start)
2212 (recenter 0)
2213 (when (>= isearch-point (window-end nil t))
2214 (goto-char isearch-point)
2215 (recenter -1)))
2216 (goto-char end)
2217 (recenter -1)
2218 (when (< isearch-point (window-start))
2219 (goto-char isearch-point)
2220 (recenter 0))))
2221 (goto-char isearch-point))
2223 (defvar isearch-pre-scroll-point nil)
2225 (defun isearch-pre-command-hook ()
2226 "Decide whether to exit Isearch mode before executing the command.
2227 Don't exit Isearch if the key sequence that invoked this command
2228 is bound in `isearch-mode-map', or if the invoked command is
2229 a prefix argument command (when `isearch-allow-prefix' is non-nil),
2230 or it is a scrolling command (when `isearch-allow-scroll' is non-nil).
2231 Otherwise, exit Isearch (when `search-exit-option' is non-nil)
2232 before the command is executed globally with terminated Isearch."
2233 (let* ((key (this-single-command-keys))
2234 (main-event (aref key 0)))
2235 (cond
2236 ;; Don't exit Isearch if we're in the middle of some
2237 ;; set-temporary-overlay-map thingy like universal-argument--mode.
2238 ((not (eq overriding-terminal-local-map isearch-mode-map)))
2239 ;; Don't exit Isearch for isearch key bindings.
2240 ((commandp (lookup-key isearch-mode-map key nil)))
2241 ;; Optionally edit the search string instead of exiting.
2242 ((eq search-exit-option 'edit)
2243 (setq this-command 'isearch-edit-string))
2244 ;; Handle a scrolling function or prefix argument.
2245 ((or (and isearch-allow-prefix
2246 (memq this-command '(universal-argument
2247 digit-argument negative-argument)))
2248 (and isearch-allow-scroll
2249 (or (eq (get this-command 'isearch-scroll) t)
2250 (eq (get this-command 'scroll-command) t))))
2251 (when isearch-allow-scroll
2252 (setq isearch-pre-scroll-point (point))))
2253 ;; A mouse click on the isearch message starts editing the search string.
2254 ((and (eq (car-safe main-event) 'down-mouse-1)
2255 (window-minibuffer-p (posn-window (event-start main-event))))
2256 ;; Swallow the up-event.
2257 (read-event)
2258 (setq this-command 'isearch-edit-string))
2259 ;; Other characters terminate the search and are then executed normally.
2260 (search-exit-option
2261 (isearch-done)
2262 (isearch-clean-overlays))
2263 ;; If search-exit-option is nil, run the command without exiting Isearch.
2264 (t
2265 (isearch-process-search-string key key)))))
2267 (defun isearch-post-command-hook ()
2268 (when isearch-pre-scroll-point
2269 (let ((ab-bel (isearch-string-out-of-window isearch-pre-scroll-point)))
2270 (if ab-bel
2271 (isearch-back-into-window (eq ab-bel 'above) isearch-pre-scroll-point)
2272 (goto-char isearch-pre-scroll-point)))
2273 (setq isearch-pre-scroll-point nil)
2274 (isearch-update)))
2276 (defun isearch-quote-char (&optional count)
2277 "Quote special characters for incremental search.
2278 With argument, add COUNT copies of the character."
2279 (interactive "p")
2280 (let ((char (read-quoted-char (isearch-message t))))
2281 ;; Assume character codes 0200 - 0377 stand for characters in some
2282 ;; single-byte character set, and convert them to Emacs
2283 ;; characters.
2284 (if (and isearch-regexp isearch-regexp-lax-whitespace (= char ?\s))
2285 (if (subregexp-context-p isearch-string (length isearch-string))
2286 (isearch-process-search-string "[ ]" " ")
2287 (isearch-process-search-char char count))
2288 ;; This used to assume character codes 0240 - 0377 stand for
2289 ;; characters in some single-byte character set, and converted them
2290 ;; to Emacs characters. But in 23.1 this feature is deprecated
2291 ;; in favor of inserting the corresponding Unicode characters.
2292 ;; (and enable-multibyte-characters
2295 ;; (setq char (unibyte-char-to-multibyte char)))
2296 (isearch-process-search-char char count))))
2298 (defun isearch-printing-char (&optional char count)
2299 "Add this ordinary printing CHAR to the search string and search.
2300 With argument, add COUNT copies of the character."
2301 (interactive (list last-command-event
2302 (prefix-numeric-value current-prefix-arg)))
2303 (let ((char (or char last-command-event)))
2304 (if (= char ?\S-\ )
2305 (setq char ?\s))
2306 (if current-input-method
2307 (isearch-process-search-multibyte-characters char count)
2308 (isearch-process-search-char char count))))
2310 (defun isearch-process-search-char (char &optional count)
2311 ;; * and ? are special in regexps when not preceded by \.
2312 ;; } and | are special in regexps when preceded by \.
2313 ;; Nothing special for + because it matches at least once.
2314 (cond
2315 ((memq char '(?* ??)) (isearch-fallback nil))
2316 ((eq char ?\}) (isearch-fallback t t))
2317 ((eq char ?|) (isearch-fallback t nil t)))
2319 ;; Append the char(s) to the search string,
2320 ;; update the message and re-search.
2321 (let* ((string (if (and (integerp count) (> count 1))
2322 (make-string count char)
2323 (char-to-string char)))
2325 string
2326 (mapconcat 'isearch-text-char-description string ""))))
2327 (isearch-process-search-string string message)))
2329 (defun isearch-process-search-string (string message)
2330 (setq isearch-string (concat isearch-string string)
2331 isearch-message (concat isearch-message message))
2332 (isearch-search-and-update))
2334 \f
2335 ;; Search Ring
2337 (defun isearch-ring-adjust1 (advance)
2338 ;; Helper for isearch-ring-adjust
2339 (let* ((ring (if isearch-regexp regexp-search-ring search-ring))
2340 (length (length ring))
2341 (yank-pointer-name (if isearch-regexp
2342 'regexp-search-ring-yank-pointer
2343 'search-ring-yank-pointer))
2344 (yank-pointer (eval yank-pointer-name)))
2345 (if (zerop length)
2346 ()
2347 (set yank-pointer-name
2348 (setq yank-pointer
2349 (mod (+ (or yank-pointer (if advance 0 -1))
2350 (if advance -1 1))
2351 length)))
2352 (setq isearch-string (nth yank-pointer ring)
2353 isearch-message (mapconcat 'isearch-text-char-description
2354 isearch-string "")))))
2356 (defun isearch-ring-adjust (advance)
2357 ;; Helper for isearch-ring-advance and isearch-ring-retreat
2358 (isearch-ring-adjust1 advance)
2359 (if search-ring-update
2360 (progn
2361 (isearch-search)
2362 (isearch-push-state)
2363 (isearch-update))
2364 ;; Otherwise, edit the search string instead. Note that there is
2365 ;; no need to push the search state after isearch-edit-string here
2366 ;; since isearch-edit-string already pushes its state
2367 (isearch-edit-string)))
2369 (defun isearch-ring-advance ()
2370 "Advance to the next search string in the ring."
2371 ;; This could be more general to handle a prefix arg, but who would use it.
2372 (interactive)
2373 (isearch-ring-adjust 'advance))
2375 (defun isearch-ring-retreat ()
2376 "Retreat to the previous search string in the ring."
2377 (interactive)
2378 (isearch-ring-adjust nil))
2380 (defun isearch-complete1 ()
2381 ;; Helper for isearch-complete and isearch-complete-edit
2382 ;; Return t if completion OK, nil if no completion exists.
2383 (let* ((ring (if isearch-regexp regexp-search-ring search-ring))
2384 (completion-ignore-case case-fold-search)
2385 (completion (try-completion isearch-string ring)))
2386 (cond
2387 ((eq completion t)
2388 ;; isearch-string stays the same
2389 t)
2390 ((or completion ; not nil, must be a string
2391 (= 0 (length isearch-string))) ; shouldn't have to say this
2392 (if (equal completion isearch-string) ;; no extension?
2393 (progn
2394 (if completion-auto-help
2395 (with-output-to-temp-buffer "*Isearch completions*"
2396 (display-completion-list
2397 (all-completions isearch-string ring))))
2398 t)
2399 (and completion
2400 (setq isearch-string completion))))
2401 (t
2402 (message "No completion") ; waits a second if in minibuffer
2403 nil))))
2405 (defun isearch-complete ()
2406 "Complete the search string from the strings on the search ring.
2407 The completed string is then editable in the minibuffer.
2408 If there is no completion possible, say so and continue searching."
2409 (interactive)
2410 (if (isearch-complete1)
2411 (progn (setq isearch-message
2412 (mapconcat 'isearch-text-char-description
2413 isearch-string ""))
2414 (isearch-edit-string))
2415 ;; else
2416 (sit-for 1)
2417 (isearch-update)))
2419 (defun isearch-complete-edit ()
2420 "Same as `isearch-complete' except in the minibuffer."
2421 (interactive)
2422 (setq isearch-string (field-string))
2423 (if (isearch-complete1)
2424 (progn
2425 (delete-field)
2426 (insert isearch-string))))
2428 \f
2429 ;; Message string
2431 (defun isearch-message (&optional c-q-hack ellipsis)
2432 ;; Generate and print the message string.
2433 (let ((cursor-in-echo-area ellipsis)
2434 (m isearch-message)
2435 (fail-pos (isearch-fail-pos t)))
2436 ;; Highlight failed part
2437 (when fail-pos
2438 (setq m (copy-sequence m))
2439 (add-text-properties fail-pos (length m) '(face isearch-fail) m)
2440 ;; Highlight failed trailing whitespace
2441 (when (string-match " +$" m)
2442 (add-text-properties (match-beginning 0) (match-end 0)
2443 '(face trailing-whitespace) m)))
2444 (setq m (concat
2445 (isearch-message-prefix ellipsis isearch-nonincremental)
2446 m
2447 (isearch-message-suffix c-q-hack)))
2448 (if c-q-hack m (let ((message-log-max nil)) (message "%s" m)))))
2450 (defun isearch-message-prefix (&optional ellipsis nonincremental)
2451 ;; If about to search, and previous search regexp was invalid,
2452 ;; check that it still is. If it is valid now,
2453 ;; let the message we display while searching say that it is valid.
2454 (and isearch-error ellipsis
2455 (condition-case ()
2456 (progn (re-search-forward isearch-string (point) t)
2457 (setq isearch-error nil))
2458 (error nil)))
2459 ;; If currently failing, display no ellipsis.
2460 (or isearch-success (setq ellipsis nil))
2461 (let ((m (concat (if isearch-success "" "failing ")
2462 (if isearch-adjusted "pending " "")
2463 (if (and isearch-wrapped
2464 (not isearch-wrap-function)
2465 (if isearch-forward
2466 (> (point) isearch-opoint)
2467 (< (point) isearch-opoint)))
2468 "over")
2469 (if isearch-wrapped "wrapped ")
2470 (let ((prefix ""))
2471 (advice-function-mapc
2472 (lambda (_ props)
2473 (let ((np (cdr (assq 'isearch-message-prefix props))))
2474 (if np (setq prefix (concat np prefix)))))
2475 isearch-filter-predicate)
2476 prefix)
2477 (if isearch-word
2478 (or (and (symbolp isearch-word)
2479 (get isearch-word 'isearch-message-prefix))
2480 "word ")
2481 "")
2482 (if isearch-regexp "regexp " "")
2483 (if multi-isearch-next-buffer-current-function "multi " "")
2484 (or isearch-message-prefix-add "")
2485 (if nonincremental "search" "I-search")
2486 (if isearch-forward "" " backward")
2487 (if current-input-method
2488 ;; Input methods for RTL languages use RTL
2489 ;; characters for their title, and that messes
2490 ;; up the display of search text after the prompt.
2491 (bidi-string-mark-left-to-right
2492 (concat " [" current-input-method-title "]: "))
2493 ": ")
2494 )))
2495 (propertize (concat (upcase (substring m 0 1)) (substring m 1))
2496 'face 'minibuffer-prompt)))
2498 (defun isearch-message-suffix (&optional c-q-hack)
2499 (concat (if c-q-hack "^Q" "")
2500 (if isearch-error
2501 (concat " [" isearch-error "]")
2502 "")
2503 (or isearch-message-suffix-add "")))
2505 \f
2506 ;; Searching
2508 (defvar isearch-search-fun-function 'isearch-search-fun-default
2509 "Non-default value overrides the behavior of `isearch-search-fun-default'.
2510 This variable's value should be a function, which will be called
2511 with no arguments, and should return a function that takes three
2512 arguments: STRING, BOUND, and NOERROR.
2514 This returned function will be used by `isearch-search-string' to
2515 search for the first occurrence of STRING or its translation.")
2517 (defun isearch-search-fun ()
2518 "Return the function to use for the search.
2519 Can be changed via `isearch-search-fun-function' for special needs."
2520 (funcall (or isearch-search-fun-function 'isearch-search-fun-default)))
2522 (defun isearch-search-fun-default ()
2523 "Return default functions to use for the search."
2524 (cond
2525 (isearch-word
2526 (lambda (string &optional bound noerror count)
2527 ;; Use lax versions to not fail at the end of the word while
2528 ;; the user adds and removes characters in the search string
2529 ;; (or when using nonincremental word isearch)
2530 (let ((lax (not (or isearch-nonincremental
2531 (null (car isearch-cmds))
2532 (eq (length isearch-string)
2533 (length (isearch--state-string
2534 (car isearch-cmds))))))))
2535 (funcall
2536 (if isearch-forward #'re-search-forward #'re-search-backward)
2537 (if (functionp isearch-word)
2538 (funcall isearch-word string lax)
2539 (word-search-regexp string lax))
2540 bound noerror count))))
2541 ((and isearch-regexp isearch-regexp-lax-whitespace
2542 search-whitespace-regexp)
2543 (if isearch-forward
2544 're-search-forward-lax-whitespace
2545 're-search-backward-lax-whitespace))
2546 (isearch-regexp
2547 (if isearch-forward 're-search-forward 're-search-backward))
2548 ((and isearch-lax-whitespace search-whitespace-regexp)
2549 (if isearch-forward
2550 'search-forward-lax-whitespace
2551 'search-backward-lax-whitespace))
2552 (t
2553 (if isearch-forward 'search-forward 'search-backward))))
2555 (defun isearch-search-string (string bound noerror)
2556 "Search for the first occurrence of STRING or its translation.
2557 If found, move point to the end of the occurrence,
2558 update the match data, and return point."
2559 (let* ((func (isearch-search-fun))
2560 (pos1 (save-excursion (funcall func string bound noerror)))
2561 pos2)
2562 (when (and
2563 ;; Avoid "obsolete" warnings for translation-table-for-input.
2564 (with-no-warnings
2565 (char-table-p translation-table-for-input))
2566 (multibyte-string-p string)
2567 ;; Minor optimization.
2568 (string-match-p "[^[:ascii:]]" string))
2569 (let ((translated
2570 (apply 'string
2571 (mapcar (lambda (c)
2572 (or
2573 ;; Avoid "obsolete" warnings for
2574 ;; translation-table-for-input.
2575 (with-no-warnings
2576 (aref translation-table-for-input c))
2577 c))
2578 string)))
2579 match-data)
2580 (when translated
2581 (save-match-data
2582 (save-excursion
2583 (if (setq pos2 (funcall func translated bound noerror))
2584 (setq match-data (match-data t)))))
2585 (when (and pos2
2586 (or (not pos1)
2587 (if isearch-forward (< pos2 pos1) (> pos2 pos1))))
2588 (setq pos1 pos2)
2589 (set-match-data match-data)))))
2590 (when pos1
2591 ;; When using multiple buffers isearch, switch to the new buffer here,
2592 ;; because `save-excursion' above doesn't allow doing it inside funcall.
2593 (if (and multi-isearch-next-buffer-current-function
2594 (buffer-live-p multi-isearch-current-buffer))
2595 (switch-to-buffer multi-isearch-current-buffer))
2596 (goto-char pos1)
2597 pos1)))
2599 (defun isearch-search ()
2600 ;; Do the search with the current search string.
2601 (if isearch-message-function
2602 (funcall isearch-message-function nil t)
2603 (isearch-message nil t))
2604 (if (and (eq isearch-case-fold-search t) search-upper-case)
2605 (setq isearch-case-fold-search
2606 (isearch-no-upper-case-p isearch-string isearch-regexp)))
2607 (condition-case lossage
2608 (let ((inhibit-point-motion-hooks isearch-invisible)
2609 (inhibit-quit nil)
2610 (case-fold-search isearch-case-fold-search)
2611 (search-invisible isearch-invisible)
2612 (retry t))
2613 (setq isearch-error nil)
2614 (while retry
2615 (setq isearch-success
2616 (isearch-search-string isearch-string nil t))
2617 ;; Clear RETRY unless the search predicate says
2618 ;; to skip this search hit.
2619 (if (or (not isearch-success)
2620 (bobp) (eobp)
2621 (= (match-beginning 0) (match-end 0))
2622 (funcall isearch-filter-predicate
2623 (match-beginning 0) (match-end 0)))
2624 (setq retry nil)))
2625 (setq isearch-just-started nil)
2626 (if isearch-success
2627 (setq isearch-other-end
2628 (if isearch-forward (match-beginning 0) (match-end 0)))))
2630 (quit (isearch-unread ?\C-g)
2631 (setq isearch-success nil))
2633 (invalid-regexp
2634 (setq isearch-error (car (cdr lossage)))
2635 (cond
2636 ((string-match
2638 isearch-error)
2639 (setq isearch-error "incomplete input"))
2640 ((and (not isearch-regexp)
2642 (cond
2643 (isearch-word
2644 (setq isearch-error "Too many words"))
2645 ((and isearch-lax-whitespace search-whitespace-regexp)
2646 (setq isearch-error "Too many spaces for whitespace matching"))))))
2648 (search-failed
2649 (setq isearch-success nil)
2650 (setq isearch-error (nth 2 lossage)))
2652 (error
2653 ;; stack overflow in regexp search.
2654 (setq isearch-error (format "%s" lossage))))
2656 (if isearch-success
2657 nil
2658 ;; Ding if failed this time after succeeding last time.
2659 (and (isearch--state-success (car isearch-cmds))
2660 (ding))
2661 (if (functionp (isearch--state-pop-fun (car isearch-cmds)))
2662 (funcall (isearch--state-pop-fun (car isearch-cmds))
2663 (car isearch-cmds)))
2664 (goto-char (isearch--state-point (car isearch-cmds)))))
2667 ;; Called when opening an overlay, and we are still in isearch.
2668 (defun isearch-open-overlay-temporary (ov)
2669 (if (not (null (overlay-get ov 'isearch-open-invisible-temporary)))
2670 ;; Some modes would want to open the overlays temporary during
2671 ;; isearch in their own way, they should set the
2672 ;; `isearch-open-invisible-temporary' to a function doing this.
2673 (funcall (overlay-get ov 'isearch-open-invisible-temporary) ov nil)
2674 ;; Store the values for the `invisible' and `intangible'
2675 ;; properties, and then set them to nil. This way the text hidden
2676 ;; by this overlay becomes visible.
2678 ;; Do we really need to set the `intangible' property to t? Can we
2679 ;; have the point inside an overlay with an `intangible' property?
2680 ;; In 19.34 this does not exist so I cannot test it.
2681 (overlay-put ov 'isearch-invisible (overlay-get ov 'invisible))
2682 (overlay-put ov 'isearch-intangible (overlay-get ov 'intangible))
2683 (overlay-put ov 'invisible nil)
2684 (overlay-put ov 'intangible nil)))
2687 ;; This is called at the end of isearch. It will open the overlays
2688 ;; that contain the latest match. Obviously in case of a C-g the
2689 ;; point returns to the original location which surely is not contain
2690 ;; in any of these overlays, se we are safe in this case too.
2691 (defun isearch-open-necessary-overlays (ov)
2692 (let ((inside-overlay (and (> (point) (overlay-start ov))
2693 (< (point) (overlay-end ov))))
2694 ;; If this exists it means that the overlay was opened using
2695 ;; this function, not by us tweaking the overlay properties.
2696 (fct-temp (overlay-get ov 'isearch-open-invisible-temporary)))
2697 (when (or inside-overlay (not fct-temp))
2698 ;; restore the values for the `invisible' and `intangible'
2699 ;; properties
2700 (overlay-put ov 'invisible (overlay-get ov 'isearch-invisible))
2701 (overlay-put ov 'intangible (overlay-get ov 'isearch-intangible))
2702 (overlay-put ov 'isearch-invisible nil)
2703 (overlay-put ov 'isearch-intangible nil))
2704 (if inside-overlay
2705 (funcall (overlay-get ov 'isearch-open-invisible) ov)
2706 (if fct-temp
2707 (funcall fct-temp ov t)))))
2709 ;; This is called when exiting isearch. It closes the temporary
2710 ;; opened overlays, except the ones that contain the latest match.
2711 (defun isearch-clean-overlays ()
2712 (when isearch-opened-overlays
2713 (mapc 'isearch-open-necessary-overlays isearch-opened-overlays)
2714 (setq isearch-opened-overlays nil)))
2717 (defun isearch-intersects-p (start0 end0 start1 end1)
2718 "Return t if regions START0..END0 and START1..END1 intersect."
2719 (or (and (>= start0 start1) (< start0 end1))
2720 (and (> end0 start1) (<= end0 end1))
2721 (and (>= start1 start0) (< start1 end0))
2722 (and (> end1 start0) (<= end1 end0))))
2725 ;; Verify if the current match is outside of each element of
2726 ;; `isearch-opened-overlays', if so close that overlay.
2728 (defun isearch-close-unnecessary-overlays (begin end)
2729 (let ((overlays isearch-opened-overlays))
2730 (setq isearch-opened-overlays nil)
2731 (dolist (ov overlays)
2732 (if (isearch-intersects-p begin end (overlay-start ov) (overlay-end ov))
2733 (push ov isearch-opened-overlays)
2734 (let ((fct-temp (overlay-get ov 'isearch-open-invisible-temporary)))
2735 (if fct-temp
2736 ;; If this exists it means that the overlay was opened
2737 ;; using this function, not by us tweaking the overlay
2738 ;; properties.
2739 (funcall fct-temp ov t)
2740 (overlay-put ov 'invisible (overlay-get ov 'isearch-invisible))
2741 (overlay-put ov 'intangible (overlay-get ov 'isearch-intangible))
2742 (overlay-put ov 'isearch-invisible nil)
2743 (overlay-put ov 'isearch-intangible nil)))))))
2746 (defun isearch-range-invisible (beg end)
2747 "Return t if all the text from BEG to END is invisible."
2748 (when (/= beg end)
2749 ;; Check that invisibility runs up to END.
2750 (save-excursion
2751 (goto-char beg)
2752 (let (;; can-be-opened keeps track if we can open some overlays.
2753 (can-be-opened (eq search-invisible 'open))
2754 ;; the list of overlays that could be opened
2755 (crt-overlays nil))
2756 (when (and can-be-opened isearch-hide-immediately)
2757 (isearch-close-unnecessary-overlays beg end))
2758 ;; If the following character is currently invisible,
2759 ;; skip all characters with that same `invisible' property value.
2760 ;; Do that over and over.
2761 (while (and (< (point) end) (invisible-p (point)))
2762 (if (invisible-p (get-text-property (point) 'invisible))
2763 (progn
2764 (goto-char (next-single-property-change (point) 'invisible
2765 nil end))
2766 ;; if text is hidden by an `invisible' text property
2767 ;; we cannot open it at all.
2768 (setq can-be-opened nil))
2769 (when can-be-opened
2770 (let ((overlays (overlays-at (point)))
2771 ov-list
2772 o
2773 invis-prop)
2774 (while overlays
2775 (setq o (car overlays)
2776 invis-prop (overlay-get o 'invisible))
2777 (if (invisible-p invis-prop)
2778 (if (overlay-get o 'isearch-open-invisible)
2779 (setq ov-list (cons o ov-list))
2780 ;; We found one overlay that cannot be
2781 ;; opened, that means the whole chunk
2782 ;; cannot be opened.
2783 (setq can-be-opened nil)))
2784 (setq overlays (cdr overlays)))
2785 (if can-be-opened
2786 ;; It makes sense to append to the open
2787 ;; overlays list only if we know that this is
2788 ;; t.
2789 (setq crt-overlays (append ov-list crt-overlays)))))
2790 (goto-char (next-overlay-change (point)))))
2791 ;; See if invisibility reaches up thru END.
2792 (if (>= (point) end)
2793 (if (and can-be-opened (consp crt-overlays))
2794 (progn
2795 (setq isearch-opened-overlays
2796 (append isearch-opened-overlays crt-overlays))
2797 (mapc 'isearch-open-overlay-temporary crt-overlays)
2798 nil)
2799 (setq isearch-hidden t)))))))
2801 (defun isearch-filter-visible (beg end)
2802 "Test whether the current search hit is visible at least partially.
2803 Return non-nil if the text from BEG to END is visible to Isearch as
2804 determined by `isearch-range-invisible' unless invisible text can be
2805 searched too when `search-invisible' is t."
2806 (or (eq search-invisible t)
2807 (not (isearch-range-invisible beg end))))
2809 \f
2810 ;; General utilities
2812 (defun isearch-no-upper-case-p (string regexp-flag)
2813 "Return t if there are no upper case chars in STRING.
2815 since they have special meaning in a regexp."
2816 (let (quote-flag (i 0) (len (length string)) found)
2817 (while (and (not found) (< i len))
2818 (let ((char (aref string i)))
2820 (setq quote-flag (not quote-flag))
2821 (if (and (not quote-flag) (not (eq char (downcase char))))
2822 (setq found t))
2823 (setq quote-flag nil)))
2824 (setq i (1+ i)))
2825 (not (or found
2826 ;; Even if there's no uppercase char, we want to detect the use
2827 ;; of [:upper:] or [:lower:] char-class, which indicates
2828 ;; clearly that the user cares about case distinction.
2830 (condition-case err
2831 (progn
2832 (string-match (substring string 0 (match-beginning 0))
2833 "")
2834 nil)
2835 (invalid-regexp
2836 (equal "Unmatched [ or [^" (cadr err)))))))))
2838 ;; Portability functions to support various Emacs versions.
2840 (defun isearch-text-char-description (c)
2841 (cond
2842 ((< c ?\s) (propertize (format "^%c" (+ c 64)) 'face 'escape-glyph))
2843 ((= c ?\^?) (propertize "^?" 'face 'escape-glyph))
2844 (t (char-to-string c))))
2846 ;; General function to unread characters or events.
2847 ;; Also insert them in a keyboard macro being defined.
2848 (defun isearch-unread (&rest char-or-events)
2849 (mapc 'store-kbd-macro-event char-or-events)
2850 (setq unread-command-events
2851 (append char-or-events unread-command-events)))
2853 \f
2854 ;; Highlighting
2856 (defvar isearch-overlay nil)
2858 (defun isearch-highlight (beg end)
2859 (if search-highlight
2860 (if isearch-overlay
2861 ;; Overlay already exists, just move it.
2862 (move-overlay isearch-overlay beg end (current-buffer))
2863 ;; Overlay doesn't exist, create it.
2864 (setq isearch-overlay (make-overlay beg end))
2865 ;; 1001 is higher than lazy's 1000 and ediff's 100+
2866 (overlay-put isearch-overlay 'priority 1001)
2867 (overlay-put isearch-overlay 'face isearch-face))))
2869 (defun isearch-dehighlight ()
2870 (when isearch-overlay
2871 (delete-overlay isearch-overlay)))
2872 \f
2873 ;; isearch-lazy-highlight feature
2874 ;; by Bob Glickstein <http://www.zanshin.com/~bobg/>
2876 ;; When active, *every* match for the current search string is
2877 ;; highlighted: the current one using the normal isearch match color
2878 ;; and all the others using `isearch-lazy-highlight'. The extra
2879 ;; highlighting makes it easier to anticipate where the cursor will
2880 ;; land each time you press C-s or C-r to repeat a pending search.
2881 ;; Highlighting of these additional matches happens in a deferred
2882 ;; fashion using "idle timers," so the cycles needed do not rob
2883 ;; isearch of its usual snappy response.
2885 ;; IMPLEMENTATION NOTE: This depends on some isearch internals.
2886 ;; Specifically:
2887 ;; - `isearch-update' is expected to be called (at least) every time
2888 ;; the search string or window-start changes;
2889 ;; - `isearch-string' is expected to contain the current search
2890 ;; string as entered by the user;
2891 ;; - the type of the current search is expected to be given by
2892 ;; `isearch-word' and `isearch-regexp';
2893 ;; - the direction of the current search is expected to be given by
2894 ;; `isearch-forward';
2895 ;; - the variable `isearch-error' is expected to be true
2896 ;; only if `isearch-string' is an invalid regexp.
2898 (defvar isearch-lazy-highlight-overlays nil)
2899 (defvar isearch-lazy-highlight-wrapped nil)
2900 (defvar isearch-lazy-highlight-start-limit nil)
2901 (defvar isearch-lazy-highlight-end-limit nil)
2902 (defvar isearch-lazy-highlight-start nil)
2903 (defvar isearch-lazy-highlight-end nil)
2904 (defvar isearch-lazy-highlight-timer nil)
2905 (defvar isearch-lazy-highlight-last-string nil)
2906 (defvar isearch-lazy-highlight-window nil)
2907 (defvar isearch-lazy-highlight-window-start nil)
2908 (defvar isearch-lazy-highlight-window-end nil)
2909 (defvar isearch-lazy-highlight-case-fold-search nil)
2910 (defvar isearch-lazy-highlight-regexp nil)
2911 (defvar isearch-lazy-highlight-lax-whitespace nil)
2912 (defvar isearch-lazy-highlight-regexp-lax-whitespace nil)
2913 (defvar isearch-lazy-highlight-word nil)
2914 (defvar isearch-lazy-highlight-forward nil)
2915 (defvar isearch-lazy-highlight-error nil)
2917 (defun lazy-highlight-cleanup (&optional force)
2918 "Stop lazy highlighting and remove extra highlighting from current buffer.
2919 FORCE non-nil means do it whether or not `lazy-highlight-cleanup'
2920 is nil. This function is called when exiting an incremental search if
2921 `lazy-highlight-cleanup' is non-nil."
2922 (interactive '(t))
2923 (if (or force lazy-highlight-cleanup)
2924 (while isearch-lazy-highlight-overlays
2925 (delete-overlay (car isearch-lazy-highlight-overlays))
2926 (setq isearch-lazy-highlight-overlays
2927 (cdr isearch-lazy-highlight-overlays))))
2928 (when isearch-lazy-highlight-timer
2929 (cancel-timer isearch-lazy-highlight-timer)
2930 (setq isearch-lazy-highlight-timer nil)))
2932 (define-obsolete-function-alias 'isearch-lazy-highlight-cleanup
2933 'lazy-highlight-cleanup
2934 "22.1")
2936 (defun isearch-lazy-highlight-new-loop (&optional beg end)
2937 "Cleanup any previous `lazy-highlight' loop and begin a new one.
2938 BEG and END specify the bounds within which highlighting should occur.
2939 This is called when `isearch-update' is invoked (which can cause the
2940 search string to change or the window to scroll). It is also used
2941 by other Emacs features."
2942 (when (and (null executing-kbd-macro)
2943 (sit-for 0) ;make sure (window-start) is credible
2944 (or (not (equal isearch-string
2945 isearch-lazy-highlight-last-string))
2946 (not (eq (selected-window)
2947 isearch-lazy-highlight-window))
2948 (not (eq isearch-lazy-highlight-case-fold-search
2949 isearch-case-fold-search))
2950 (not (eq isearch-lazy-highlight-regexp
2951 isearch-regexp))
2952 (not (eq isearch-lazy-highlight-word
2953 isearch-word))
2954 (not (eq isearch-lazy-highlight-lax-whitespace
2955 isearch-lax-whitespace))
2956 (not (eq isearch-lazy-highlight-regexp-lax-whitespace
2957 isearch-regexp-lax-whitespace))
2958 (not (= (window-start)
2959 isearch-lazy-highlight-window-start))
2960 (not (= (window-end) ; Window may have been split/joined.
2961 isearch-lazy-highlight-window-end))
2962 (not (eq isearch-forward
2963 isearch-lazy-highlight-forward))
2964 ;; In case we are recovering from an error.
2965 (not (equal isearch-error
2966 isearch-lazy-highlight-error))))
2967 ;; something important did indeed change
2968 (lazy-highlight-cleanup t) ;kill old loop & remove overlays
2969 (setq isearch-lazy-highlight-error isearch-error)
2970 ;; It used to check for `(not isearch-error)' here, but actually
2971 ;; lazy-highlighting might find matches to highlight even when
2972 ;; `isearch-error' is non-nil. (Bug#9918)
2973 (setq isearch-lazy-highlight-start-limit beg
2974 isearch-lazy-highlight-end-limit end)
2975 (setq isearch-lazy-highlight-window (selected-window)
2976 isearch-lazy-highlight-window-start (window-start)
2977 isearch-lazy-highlight-window-end (window-end)
2978 ;; Start lazy-highlighting at the beginning of the found
2979 ;; match (`isearch-other-end'). If no match, use point.
2980 ;; One of the next two variables (depending on search direction)
2981 ;; is used to define the starting position of lazy-highlighting
2982 ;; and also to remember the current position of point between
2983 ;; calls of `isearch-lazy-highlight-update', and another variable
2984 ;; is used to define where the wrapped search must stop.
2985 isearch-lazy-highlight-start (or isearch-other-end (point))
2986 isearch-lazy-highlight-end (or isearch-other-end (point))
2987 isearch-lazy-highlight-wrapped nil
2988 isearch-lazy-highlight-last-string isearch-string
2989 isearch-lazy-highlight-case-fold-search isearch-case-fold-search
2990 isearch-lazy-highlight-regexp isearch-regexp
2991 isearch-lazy-highlight-lax-whitespace isearch-lax-whitespace
2992 isearch-lazy-highlight-regexp-lax-whitespace isearch-regexp-lax-whitespace
2993 isearch-lazy-highlight-word isearch-word
2994 isearch-lazy-highlight-forward isearch-forward)
2995 (unless (equal isearch-string "")
2996 (setq isearch-lazy-highlight-timer
2997 (run-with-idle-timer lazy-highlight-initial-delay nil
2998 'isearch-lazy-highlight-update)))))
3000 (defun isearch-lazy-highlight-search ()
3001 "Search ahead for the next or previous match, for lazy highlighting.
3002 Attempt to do the search exactly the way the pending Isearch would."
3003 (condition-case nil
3004 (let ((case-fold-search isearch-lazy-highlight-case-fold-search)
3005 (isearch-regexp isearch-lazy-highlight-regexp)
3006 (isearch-word isearch-lazy-highlight-word)
3007 (isearch-lax-whitespace
3008 isearch-lazy-highlight-lax-whitespace)
3009 (isearch-regexp-lax-whitespace
3010 isearch-lazy-highlight-regexp-lax-whitespace)
3011 (isearch-forward isearch-lazy-highlight-forward)
3012 (search-invisible nil) ; don't match invisible text
3013 (retry t)
3014 (success nil)
3015 (bound (if isearch-lazy-highlight-forward
3016 (min (or isearch-lazy-highlight-end-limit (point-max))
3017 (if isearch-lazy-highlight-wrapped
3018 isearch-lazy-highlight-start
3019 (window-end)))
3020 (max (or isearch-lazy-highlight-start-limit (point-min))
3021 (if isearch-lazy-highlight-wrapped
3022 isearch-lazy-highlight-end
3023 (window-start))))))
3024 ;; Use a loop like in `isearch-search'.
3025 (while retry
3026 (setq success (isearch-search-string
3027 isearch-lazy-highlight-last-string bound t))
3028 ;; Clear RETRY unless the search predicate says
3029 ;; to skip this search hit.
3030 (if (or (not success)
3031 (= (point) bound) ; like (bobp) (eobp) in `isearch-search'.
3032 (= (match-beginning 0) (match-end 0))
3033 (funcall isearch-filter-predicate
3034 (match-beginning 0) (match-end 0)))
3035 (setq retry nil)))
3036 success)
3037 (error nil)))
3039 (defun isearch-lazy-highlight-update ()
3040 "Update highlighting of other matches for current search."
3041 (let ((max lazy-highlight-max-at-a-time)
3042 (looping t)
3043 nomore)
3044 (with-local-quit
3045 (save-selected-window
3046 (if (and (window-live-p isearch-lazy-highlight-window)
3047 (not (eq (selected-window) isearch-lazy-highlight-window)))
3048 (select-window isearch-lazy-highlight-window))
3049 (save-excursion
3050 (save-match-data
3051 (goto-char (if isearch-lazy-highlight-forward
3052 isearch-lazy-highlight-end
3053 isearch-lazy-highlight-start))
3054 (while looping
3055 (let ((found (isearch-lazy-highlight-search)))
3056 (when max
3057 (setq max (1- max))
3058 (if (<= max 0)
3059 (setq looping nil)))
3060 (if found
3061 (let ((mb (match-beginning 0))
3062 (me (match-end 0)))
3063 (if (= mb me) ;zero-length match
3064 (if isearch-lazy-highlight-forward
3065 (if (= mb (if isearch-lazy-highlight-wrapped
3066 isearch-lazy-highlight-start
3067 (window-end)))
3068 (setq found nil)
3069 (forward-char 1))
3070 (if (= mb (if isearch-lazy-highlight-wrapped
3071 isearch-lazy-highlight-end
3072 (window-start)))
3073 (setq found nil)
3074 (forward-char -1)))
3076 ;; non-zero-length match
3077 (let ((ov (make-overlay mb me)))
3078 (push ov isearch-lazy-highlight-overlays)
3079 ;; 1000 is higher than ediff's 100+,
3080 ;; but lower than isearch main overlay's 1001
3081 (overlay-put ov 'priority 1000)
3082 (overlay-put ov 'face lazy-highlight-face)
3083 (overlay-put ov 'window (selected-window))))
3084 ;; Remember the current position of point for
3085 ;; the next call of `isearch-lazy-highlight-update'
3086 ;; when `lazy-highlight-max-at-a-time' is too small.
3087 (if isearch-lazy-highlight-forward
3088 (setq isearch-lazy-highlight-end (point))
3089 (setq isearch-lazy-highlight-start (point)))))
3091 ;; not found or zero-length match at the search bound
3092 (if (not found)
3093 (if isearch-lazy-highlight-wrapped
3094 (setq looping nil
3095 nomore t)
3096 (setq isearch-lazy-highlight-wrapped t)
3097 (if isearch-lazy-highlight-forward
3098 (progn
3099 (setq isearch-lazy-highlight-end (window-start))
3100 (goto-char (max (or isearch-lazy-highlight-start-limit (point-min))
3101 (window-start))))
3102 (setq isearch-lazy-highlight-start (window-end))
3103 (goto-char (min (or isearch-lazy-highlight-end-limit (point-max))
3104 (window-end))))))))
3105 (unless nomore
3106 (setq isearch-lazy-highlight-timer
3107 (run-at-time lazy-highlight-interval nil
3108 'isearch-lazy-highlight-update)))))))))
3110 (defun isearch-resume (string regexp word forward message case-fold)
3111 "Resume an incremental search.
3112 STRING is the string or regexp searched for.
3113 REGEXP non-nil means the resumed search was a regexp search.
3114 WORD non-nil means resume a word search.
3115 FORWARD non-nil means resume a forward search.
3116 MESSAGE is the echo-area message recorded for the search resumed.
3117 CASE-FOLD non-nil means the search was case-insensitive."
3118 (isearch-mode forward regexp nil nil word)
3119 (setq isearch-string string
3120 isearch-message message
3121 isearch-case-fold-search case-fold)
3122 (isearch-search)
3123 (isearch-update))
3125 ;;; isearch.el ends here