Makefile.in

   1 # DIST: This is the distribution Makefile for Emacs.  configure can
   2 # DIST: make most of the changes to this file you might want, so try
   3 # DIST: that first.
   4
   5 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
   6 #   2001, 2002, 2003, 2004, 2005, 2006, 2007  Free Software Foundation, Inc.
   7
   8 # This file is part of GNU Emacs.
   9
  10 # GNU Emacs is free software; you can redistribute it and/or modify
  11 # it under the terms of the GNU General Public License as published by
  12 # the Free Software Foundation; either version 3, or (at your option)
  13 # any later version.
  14
  15 # GNU Emacs is distributed in the hope that it will be useful,
  16 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 # GNU General Public License for more details.
  19
  20 # You should have received a copy of the GNU General Public License
  21 # along with GNU Emacs; see the file COPYING.  If not, write to
  22 # the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  23 # Boston, MA 02110-1301, USA.
  24
  25 # make all      to compile and build Emacs.
  26 # make install  to install it.
  27 # make TAGS     to update tags tables.
  28 #
  29 # make clean  or  make mostlyclean
  30 #      Delete all files from the current directory that are normally
  31 #      created by building the program.  Don't delete the files that
  32 #      record the configuration.  Also preserve files that could be made
  33 #      by building, but normally aren't because the distribution comes
  34 #      with them.
  35 #
  36 #      Delete `.dvi' files here if they are not part of the distribution.
  37 #
  38 # make distclean
  39 #      Delete all files from the current directory that are created by
  40 #      configuring or building the program.  If you have unpacked the
  41 #      source and built the program without creating any other files,
  42 #      `make distclean' should leave only the files that were in the
  43 #      distribution.
  44 #
  45 # make maintainer-clean
  46 #      Delete everything from the current directory that can be
  47 #      reconstructed with this Makefile.  This typically includes
  48 #      everything deleted by distclean, plus more: .elc files,
  49 #      C source files produced by Bison, tags tables, info files,
  50 #      and so on.
  51 #
  52 # make extraclean
  53 #      Still more severe - delete backup and autosave files, too.
  54 #
  55 # make bootstrap
  56 #      Recompiles all the Emacs Lisp files using the latest source,
  57 #      then rebuilds Emacs.
  58 #
  59 # make bootfast
  60 #      Recompiles changed Emacs Lisp files using the latest C source,
  61 #      then rebuilds Emacs.  This is faster than `make bootstrap'
  62 #      but once in a while an old .elc file can cause trouble.
  63
  64 SHELL = /bin/sh
  65
  66 # This may not work with certain non-GNU make's.  It only matters when
  67 # inheriting a CDPATH not starting with the current directory.
  68 CDPATH=
  69
  70 # If Make doesn't predefine MAKE, set it here.
  71 @SET_MAKE@
  72
  73 # ==================== Things `configure' Might Edit ====================
  74
  75 CC=@CC@
  76 CPP=@CPP@
  77 C_SWITCH_SYSTEM=@c_switch_system@
  78 ALLOCA=@ALLOCA@
  79 LN_S=@LN_S@
  80 CFLAGS=@CFLAGS@
  81 LDFLAGS=@LDFLAGS@
  82 CPPFLAGS=@CPPFLAGS@
  83 C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
  84 LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
  85 EXEEXT=@EXEEXT@
  86
  87 ### These help us choose version- and architecture-specific directories
  88 ### to install files in.
  89
  90 ### This should be the number of the Emacs version we're building,
  91 ### like `18.59' or `19.0'.
  92 version=@version@
  93
  94 ### This should be the name of the configuration we're building Emacs
  95 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  96 configuration=@configuration@
  97
  98 # ==================== Where To Install Things ====================
  99
 100 # The default location for installation.  Everything is placed in
 101 # subdirectories of this directory.  The default values for many of
 102 # the variables below are expressed in terms of this one, so you may
 103 # not need to change them.  This defaults to /usr/local.
 104 prefix=@prefix@
 105
 106 # Like `prefix', but used for architecture-specific files.
 107 exec_prefix=@exec_prefix@
 108
 109 # Where to install Emacs and other binaries that people will want to
 110 # run directly (like etags).
 111 bindir=@bindir@
 112
 113 # The root of the directory tree for read-only architecture-independent
 114 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 115 datarootdir=@datarootdir@
 116
 117 # Where to install architecture-independent data files.  ${lispdir}
 118 # and ${etcdir} are subdirectories of this.
 119 datadir=@datadir@
 120
 121 # Where to install and expect the files that Emacs modifies as it
 122 # runs.  These files are all architecture-independent.
 123 # Right now, this is not used.
 124 sharedstatedir=@sharedstatedir@
 125
 126 # Where to install and expect executable files to be run by Emacs
 127 # rather than directly by users, and other architecture-dependent
 128 # data.  ${archlibdir} is a subdirectory of this.
 129 libexecdir=@libexecdir@
 130
 131 # Where to install Emacs's man pages, and what extension they should have.
 132 mandir=@mandir@
 133 manext=.1
 134 man1dir=$(mandir)/man1
 135
 136 # Where to install and expect the info files describing Emacs.  In the
 137 # past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
 138 # since there are now many packages documented with the texinfo
 139 # system, it is inappropriate to imply that it is part of Emacs.
 140 infodir=@infodir@
 141 INFO_FILES=ada-mode autotype calc ccmode cl dired-x ebrowse ediff efaq  \
 142            eintr elisp emacs emacs-mime erc eshell eudc flymake forms   \
 143            gnus idlwave info message mh-e newsticker org pcl-cvs pgg    \
 144            rcirc reftex remember sc ses sieve speedbar tramp vip viper  \
 145            widget woman smtpmail url
 146
 147 # Directory for local state files for all programs.
 148 localstatedir=@localstatedir@
 149
 150 # Where to look for bitmap files.
 151 bitmapdir=@bitmapdir@
 152
 153 # Where to find the source code.  The source code for Emacs's C kernel is
 154 # expected to be in ${srcdir}/src, and the source code for Emacs's
 155 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 156 # set by the configure script's `--srcdir' option.
 157
 158 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 159 srcdir=@srcdir@
 160
 161 # Where the manpage source files are kept.
 162 mansrcdir=$(srcdir)/doc/man
 163
 164 # Tell make where to find source files; this is needed for the makefiles.
 165 VPATH=@srcdir@
 166
 167 # Where to find the application default.
 168 x_default_search_path=@x_default_search_path@
 169
 170 # Location to install Emacs.app on Mac OS X
 171 carbon_appdir=@carbon_appdir@
 172
 173 # ==================== Emacs-specific directories ====================
 174
 175 # These variables hold the values Emacs will actually use.  They are
 176 # based on the values of the standard Make variables above.
 177
 178 # Where to install the lisp files distributed with
 179 # Emacs.  This includes the Emacs version, so that the
 180 # lisp files for different versions of Emacs will install
 181 # themselves in separate directories.
 182 lispdir=@lispdir@
 183
 184 # Directories Emacs should search for lisp files specific
 185 # to this site (i.e. customizations), before consulting
 186 # ${lispdir}.  This should be a colon-separated list of
 187 # directories.
 188 locallisppath=@locallisppath@
 189
 190 # Where Emacs will search to find its lisp files.  Before
 191 # changing this, check to see if your purpose wouldn't
 192 # better be served by changing locallisppath.  This
 193 # should be a colon-separated list of directories.
 194 lisppath=@lisppath@
 195
 196 # Where Emacs will search for its lisp files while
 197 # building.  This is only used during the process of
 198 # compiling Emacs, to help Emacs find its lisp files
 199 # before they've been installed in their final location.
 200 # It's usually identical to lisppath, except that
 201 # it does not include locallisppath, and the
 202 # entry for the directory containing the installed lisp
 203 # files has been replaced with ../lisp.  This should be a
 204 # colon-separated list of directories.
 205 buildlisppath=${srcdir}/lisp
 206
 207 # Where to install the other architecture-independent
 208 # data files distributed with Emacs (like the tutorial,
 209 # the cookie recipes and the Zippy database). This path
 210 # usually contains the Emacs version number, so the data
 211 # files for multiple versions of Emacs may be installed
 212 # at once.
 213 etcdir=@etcdir@
 214
 215 # Where to put executables to be run by Emacs rather than
 216 # the user.  This path usually includes the Emacs version
 217 # and configuration name, so that multiple configurations
 218 # for multiple versions of Emacs may be installed at
 219 # once.
 220 archlibdir=@archlibdir@
 221
 222 # Where to put the docstring file.
 223 docdir=@docdir@
 224
 225 # Where to install Emacs game score files.
 226 gamedir=@gamedir@
 227
 228 # ==================== Utility Programs for the Build ====================
 229
 230 # Allow the user to specify the install program.
 231 INSTALL = @INSTALL@
 232 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 233 INSTALL_DATA = @INSTALL_DATA@
 234 INSTALL_INFO = @INSTALL_INFO@
 235 # By default, we uphold the dignity of our programs.
 236 INSTALL_STRIP =
 237
 238 # We use gzip to compress installed .el files.
 239 GZIP_PROG = @GZIP_PROG@
 240
 241 # ============================= Targets ==============================
 242
 243 # Program name transformation.
 244 TRANSFORM = @program_transform_name@
 245
 246 # What emacs should be called when installed.
 247 EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`
 248 EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`
 249
 250 # Subdirectories to make recursively.  `lisp' is not included
 251 # because the compiled lisp files are part of the distribution.
 252 # leim is not included because it needs special handling.
 253 SUBDIR = lib-src src
 254
 255 # The makefiles of the directories in $SUBDIR.
 256 SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
 257
 258 # Subdirectories to install, and where they'll go.
 259 # lib-src's makefile knows how to install it, so we don't do that here.
 260 # leim's makefile also knows how to install it, so we don't do that here.
 261 # When installing the info files, we need to do special things to
 262 # avoid nuking an existing dir file, so we don't do that here;
 263 # instead, we have written out explicit code in the `install' targets.
 264 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
 265 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}
 266
 267 all: ${SUBDIR} leim
 268
 269 removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
 270
 271 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 272 epaths-force: FRC
 273         @(lisppath=`echo ${lisppath} | ${removenullpaths}` ;            \
 274           buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;  \
 275           x_default_search_path=`echo ${x_default_search_path}`; \
 276           gamedir=`echo ${gamedir}`; \
 277           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 278           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'      \
 279           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 280           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 281           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 282           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 283           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 284           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 285           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 286           -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \
 287           -e 's;/[*] *arch-tag:.*;/*;') &&              \
 288         ${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
 289
 290 # For parallel make, src should be built before leim.
 291 # "export PARALLEL=0" is for SGI's Make, to prevent it from
 292 # running more than 1 process in the leim directory, especially for
 293 # the $TIT files there.
 294 leim:   src ${SUBDIR_MAKEFILES} FRC
 295         (export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \
 296           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 297           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')
 298
 299 src:    lib-src FRC
 300
 301 lib-src: FRC src/config.stamp
 302
 303 .RECURSIVE: ${SUBDIR} leim
 304
 305 ${SUBDIR}: maybe_bootstrap ${SUBDIR_MAKEFILES} FRC
 306         cd $@; $(MAKE) all $(MFLAGS) \
 307           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 308           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 309
 310 blessmail: ${SUBDIR_MAKEFILES} src FRC
 311         cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
 312           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 313
 314 Makefile: $(srcdir)/Makefile.in config.status
 315         ./config.status
 316
 317 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 318         ./config.status --recheck
 319
 320 AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4
 321
 322 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 323         cd ${srcdir} && autoconf
 324
 325 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 326         @true
 327 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 328         cd ${srcdir} && autoheader
 329         rm -f $(srcdir)/src/stamp-h.in
 330         echo timestamp > $(srcdir)/src/stamp-h.in
 331
 332 src/Makefile: $(srcdir)/src/Makefile.in config.status
 333         ./config.status
 334
 335 src/config.stamp: $(srcdir)/src/config.in config.status
 336         ./config.status
 337         touch src/config.stamp
 338
 339 lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
 340         ./config.status
 341
 342 doc/emacs/Makefile: $(srcdir)/doc/emacs/Makefile.in config.status
 343         ./config.status
 344
 345 doc/misc/Makefile: $(srcdir)/doc/misc/Makefile.in config.status
 346         ./config.status
 347
 348 doc/lispref/Makefile: $(srcdir)/doc/lispref/Makefile.in config.status
 349         ./config.status
 350
 351 doc/lispintro/Makefile: $(srcdir)/doc/lispintro/Makefile.in config.status
 352         ./config.status
 353
 354 oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
 355         ./config.status
 356
 357 lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
 358         ./config.status
 359
 360 leim/Makefile: $(srcdir)/leim/Makefile.in config.status
 361         ./config.status
 362
 363 # ==================== Installation ====================
 364
 365 ## If we let lib-src do its own installation, that means we
 366 ## don't have to duplicate the list of utilities to install in
 367 ## this Makefile as well.
 368
 369 ## On AIX, use tar xBf.
 370 ## On Xenix, use tar xpf.
 371
 372 .PHONY: install mkdir
 373
 374 ## We delete each directory in ${COPYDESTS} before we copy into it;
 375 ## that way, we can reinstall over directories that have been put in
 376 ## place with their files read-only (perhaps because they are checked
 377 ## into RCS).  In order to make this safe, we make sure that the
 378 ## source exists and is distinct from the destination.
 379 ### We do install-arch-indep first because
 380 ### the executable needs the Lisp files and DOC file to work properly.
 381 install: all install-arch-indep install-arch-dep install-leim blessmail
 382         @true
 383
 384 ### Install the executables that were compiled specifically for this machine.
 385 ### It would be nice to do something for a parallel make
 386 ### to ensure that install-arch-indep finishes before this starts.
 387 install-arch-dep: mkdir
 388         (cd lib-src; \
 389           $(MAKE) install $(MFLAGS) prefix=${prefix} \
 390             exec_prefix=${exec_prefix} bindir=${bindir} \
 391             libexecdir=${libexecdir} archlibdir=${archlibdir} \
 392             INSTALL_STRIP=${INSTALL_STRIP})
 393         ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)
 394         -chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)
 395         rm -f $(DESTDIR)${bindir}/$(EMACS)
 396         -ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)
 397         -unset CDPATH; \
 398         for f in `cd lib-src && echo fns-*.el`; do \
 399           if test -r lib-src/$$f ; then \
 400             ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \
 401           else true; fi ; \
 402         done
 403         if test "${carbon_appdir}" != ""; then \
 404           umask 022; mkdir -p $(DESTDIR)${carbon_appdir}/Emacs.app; \
 405           (cd mac/Emacs.app; (tar -chf - . | \
 406                 (cd $(DESTDIR)${carbon_appdir}/Emacs.app; umask 022; tar -xvf - \
 407                         && cat > /dev/null))) || exit 1; \
 408         fi
 409
 410 ### Install the files that are machine-independent.
 411 ### Most of them come straight from the distribution;
 412 ### the exception is the DOC-* files, which are copied
 413 ### from the build directory.
 414
 415 ## Note that we copy DOC* and then delete DOC
 416 ## as a workaround for a bug in tar on Ultrix 4.2.
 417
 418 ## We install only the relevant DOC file if possible
 419 ## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.
 420
 421 ## If people complain about the h flag in tar command, take that out.
 422 ## That flag is also used in leim/Makefile.in
 423
 424 ## Note that the Makefiles in the etc directory are potentially useful
 425 ## in an installed Emacs, so should not be excluded.
 426
 427 ## installuser:
 428 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 429 ## Nuisance because i) it needs to be the user running install, so
 430 ## configure can't set it; ii) can't (?) use the result of rule
 431 ## commands to set make variables.
 432 install-arch-indep: mkdir info
 433         -set ${COPYDESTS} ; \
 434         unset CDPATH; \
 435         for dir in ${COPYDIR} ; do \
 436           if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
 437             rm -rf $$1 ; \
 438           fi ; \
 439           shift ; \
 440         done
 441         -set ${COPYDESTS} ; \
 442         mkdir ${COPYDESTS} ; \
 443         chmod ugo+rx ${COPYDESTS} ; \
 444         unset CDPATH; \
 445         for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 446           `id -un 2> /dev/null`; do \
 447           [ -n "$${installuser}" ] && break ; \
 448         done ; \
 449         for dir in ${COPYDIR} ; do \
 450           dest=$$1 ; shift ; \
 451           [ -d $${dir} ] \
 452           && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
 453           && (echo "Copying $${dir} to $${dest}..." ; \
 454               (cd $${dir}; tar -chf - . ) \
 455                 | (cd $${dest}; umask 022; \
 456                    tar -xvf - && cat > /dev/null) || exit 1; \
 457               find $${dest} -exec chown $${installuser} {} ';' ;\
 458               for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
 459                 chmod a+rx $${subdir} ; \
 460                 rm -rf $${subdir}/RCS ; \
 461                 rm -rf $${subdir}/CVS ; \
 462                 rm -f  $${subdir}/.cvsignore ; \
 463                 rm -f  $${subdir}/.arch-inventory ; \
 464                 rm -f  $${subdir}/\#* ; \
 465                 rm -f  $${subdir}/.\#* ; \
 466                 rm -f  $${subdir}/*~ ; \
 467                 rm -f  $${subdir}/*.orig ; \
 468                 [ "$${dir}" != "${srcdir}/etc" ] && \
 469                         rm -f  $${subdir}/[mM]akefile* ; \
 470                 rm -f  $${subdir}/ChangeLog* ; \
 471                 rm -f  $${subdir}/dired.todo ; \
 472               done) ; \
 473         done
 474         -rm -f $(DESTDIR)${lispdir}/subdirs.el
 475         $(srcdir)/update-subdirs $(DESTDIR)${lispdir}
 476         if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
 477         then true; \
 478         else \
 479           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 480            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 481             > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \
 482         fi
 483         chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el
 484         -if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \
 485         then true; \
 486         else \
 487           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 488            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 489             > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \
 490         fi
 491         -chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el
 492         -unset CDPATH; \
 493         if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \
 494         then \
 495            fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \
 496            if [ -f "./etc/DOC-$${fullversion}" ]; \
 497            then \
 498              docfile="DOC-$${fullversion}"; \
 499            else \
 500              docfile="DOC-${version}*"; \
 501            fi; \
 502            echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \
 503            (cd ./etc; tar -chf - $${docfile}) \
 504              |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 505            (cd $(DESTDIR)$(docdir); \
 506             for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 507               `id -un 2> /dev/null`; do \
 508                [ -n "$${installuser}" ] && break ; \
 509             done ; \
 510             chown $${installuser} DOC*; chmod a+r DOC*; \
 511             if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \
 512         else true; fi
 513         -unset CDPATH; \
 514         if [ -r ./lisp ] \
 515            && [ -r ./lisp/simple.el ] \
 516            && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \
 517            && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
 518         then \
 519            echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \
 520            (cd lisp; tar -chf - *.el *.elc) \
 521              |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \
 522            (cd $(DESTDIR)${lispdir}; \
 523             for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 524               `id -un 2> /dev/null`; do \
 525                [ -n "$${installuser}" ] && break ; \
 526             done ; \
 527             find . -exec chown $${installuser} {} ';') ; \
 528         else true; fi
 529         -unset CDPATH; \
 530         if [ -n "${GZIP_PROG}" ]; \
 531         then \
 532            echo "Compressing *.el ..." ; \
 533            (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \
 534                 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
 535             done) \
 536         else true; fi
 537         -unset CDPATH; \
 538         thisdir=`/bin/pwd`; \
 539         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 540         then \
 541           (cd $(DESTDIR)${infodir};  \
 542            if [ -f dir ]; then true; \
 543            else \
 544              (cd $${thisdir}; \
 545               ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \
 546               chmod a+r $(DESTDIR)${infodir}/dir); \
 547            fi; \
 548            cd ${srcdir}/info ; \
 549            for elt in $(INFO_FILES); do \
 550               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 551                 ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \
 552                 chmod a+r $(DESTDIR)${infodir}/$$f; \
 553               done; \
 554            done); \
 555         else true; fi
 556         -unset CDPATH; \
 557         thisdir=`/bin/pwd`; \
 558         if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \
 559         then \
 560           for elt in $(INFO_FILES); do \
 561             (cd $${thisdir}; \
 562              ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
 563           done; \
 564         else true; fi
 565         -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} $(DESTDIR)${datadir}/emacs/site-lisp ${COPYDESTS} $(DESTDIR)${infodir}
 566         thisdir=`/bin/pwd`; \
 567         cd ${mansrcdir}; \
 568         for page in emacs emacsclient etags ctags ; do \
 569           (cd $${thisdir}; \
 570            ${INSTALL_DATA} ${mansrcdir}/$${page}.1 $(DESTDIR)${man1dir}/$${page}${manext}; \
 571            chmod a+r $(DESTDIR)${man1dir}/$${page}${manext}); \
 572         done
 573
 574 ### Install LEIM files.  Although they are machine-independent, we
 575 ### have separate target here instead of including it in
 576 ### `install-arch-indep'.  People who extracted LEIM files after they
 577 ### insalled Emacs itself can install only LEIM files by this target.
 578 install-leim: leim/Makefile mkdir
 579         cd leim; $(MAKE) install
 580
 581 ### Build Emacs and install it, stripping binaries while installing them.
 582 install-strip:
 583         $(MAKE) INSTALL_STRIP=-s install
 584
 585 ### Build all the directories we're going to install Emacs in.  Since
 586 ### we may be creating several layers of directories (for example,
 587 ### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
 588 ### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.
 589 mkdir: FRC
 590         if [ -d $(DESTDIR)${datadir} ]; then true; else \
 591           $(srcdir)/mkinstalldirs $(DESTDIR)${datadir}; \
 592           chmod a+r $(DESTDIR)${datadir};\
 593         fi
 594         $(srcdir)/mkinstalldirs ${COPYDESTS} $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \
 595           $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \
 596           $(DESTDIR)${datadir}/emacs/site-lisp \
 597           $(DESTDIR)${datadir}/emacs/${version}/site-lisp \
 598           $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'`
 599
 600 ### Delete all the installed files that the `install' target would
 601 ### create (but not the noninstalled files such as `make all' would
 602 ### create).
 603 ###
 604 ### Don't delete the lisp and etc directories if they're in the source tree.
 605 uninstall:
 606         (cd lib-src;                                    \
 607          $(MAKE) $(MFLAGS) uninstall                    \
 608             prefix=${prefix} exec_prefix=${exec_prefix} \
 609             bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
 610         -unset CDPATH; \
 611         for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do        \
 612           if [ -d $${dir} ]; then                       \
 613             case `(cd $${dir} ; /bin/pwd)` in           \
 614               `(cd ${srcdir} ; /bin/pwd)`* ) ;;         \
 615               * ) rm -rf $${dir} ;;                     \
 616             esac ;                                      \
 617             case $${dir} in                             \
 618               $(DESTDIR)${datadir}/emacs/${version}/* )         \
 619                 rm -rf $(DESTDIR)${datadir}/emacs/${version}    \
 620               ;;                                        \
 621             esac ;                                      \
 622           fi ;                                          \
 623         done
 624         (cd $(DESTDIR)${archlibdir} && rm -f fns-*)
 625         -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
 626         (cd $(DESTDIR)${infodir} && \
 627           for elt in $(INFO_FILES); do \
 628             $(INSTALL_INFO) --remove --info-dir=. $$elt; \
 629             for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 630               rm -f $$f; \
 631             done; \
 632           done;)
 633         (cd $(DESTDIR)${man1dir}  && rm -f emacs${manext} emacsclient${manext} etags${manext} ctags${manext})
 634         (cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))
 635
 636
 637 FRC:
 638
 639 # ==================== Cleaning up and miscellanea ====================
 640
 641 .PHONY: mostlyclean clean distclean maintainer-clean extraclean
 642
 643 ### `mostlyclean'
 644 ###      Like `clean', but may refrain from deleting a few files that people
 645 ###      normally don't want to recompile.  For example, the `mostlyclean'
 646 ###      target for GCC does not delete `libgcc.a', because recompiling it
 647 ###      is rarely necessary and takes a lot of time.
 648 mostlyclean: FRC
 649         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 650         (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
 651         (cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)
 652         (cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)
 653         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)
 654         -(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)
 655         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)
 656         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)
 657         (cd leim;     $(MAKE) $(MFLAGS) mostlyclean)
 658
 659 ### `clean'
 660 ###      Delete all files from the current directory that are normally
 661 ###      created by building the program.  Don't delete the files that
 662 ###      record the configuration.  Also preserve files that could be made
 663 ###      by building, but normally aren't because the distribution comes
 664 ###      with them.
 665 ###
 666 ###      Delete `.dvi' files here if they are not part of the distribution.
 667 clean: FRC
 668         (cd src;      $(MAKE) $(MFLAGS) clean)
 669         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 670         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 671         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 672         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 673         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 674         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 675         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 676         (cd leim;     $(MAKE) $(MFLAGS) clean)
 677
 678 ### `distclean'
 679 ###      Delete all files from the current directory that are created by
 680 ###      configuring or building the program.  If you have unpacked the
 681 ###      source and built the program without creating any other files,
 682 ###      `make distclean' should leave only the files that were in the
 683 ###      distribution.
 684 top_distclean=\
 685         rm -f config.status config.cache config.log ; \
 686         rm -f Makefile ${SUBDIR_MAKEFILES} ; \
 687         if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
 688 distclean: FRC
 689         (cd src;      $(MAKE) $(MFLAGS) distclean)
 690         (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
 691         (cd lwlib;    $(MAKE) $(MFLAGS) distclean)
 692         (cd lib-src;  $(MAKE) $(MFLAGS) distclean)
 693         (cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)
 694         (cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)
 695         (cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)
 696         (cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)
 697         (cd leim;     $(MAKE) $(MFLAGS) distclean)
 698         (cd lisp;     $(MAKE) $(MFLAGS) distclean)
 699         ${top_distclean}
 700
 701 ### `maintainer-clean'
 702 ###      Delete everything from the current directory that can be
 703 ###      reconstructed with this Makefile.  This typically includes
 704 ###      everything deleted by distclean, plus more: C source files
 705 ###      produced by Bison, tags tables, info files, and so on.
 706 ###
 707 ###      One exception, however: `make maintainer-clean' should not delete
 708 ###      `configure' even if `configure' can be remade using a rule in the
 709 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 710 ###      anything that needs to exist in order to run `configure' and then
 711 ###      begin to build the program.
 712 maintainer-clean: FRC
 713         (cd src;      $(MAKE) $(MFLAGS) maintainer-clean)
 714         (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
 715         (cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)
 716         (cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)
 717         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)
 718         -(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)
 719         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)
 720         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)
 721         (cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)
 722         (cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)
 723         ${top_distclean}
 724
 725 ### This doesn't actually appear in the coding standards, but Karl
 726 ### says GCC supports it, and that's where the configuration part of
 727 ### the coding standards seem to come from.  It's like distclean, but
 728 ### it deletes backup and autosave files too.
 729 extraclean:
 730         for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 731         ${top_distclean}
 732         -rm -f config-tmp-*
 733         -rm -f *~ \#*
 734
 735 # The src subdir knows how to do the right thing
 736 # even when the build directory and source dir are different.
 737 TAGS tags: lib-src src
 738         cd src; $(MAKE) tags
 739
 740 check:
 741         @echo "We don't have any tests for GNU Emacs yet."
 742
 743 dist:
 744         cd ${srcdir}; ./make-dist
 745
 746 .PHONY: info dvi dist check html
 747 force-info:
 748 # Note that man/Makefile knows how to
 749 # put the info files in $(srcdir),
 750 # so we can do ok running make in the build dir.
 751 info: force-info
 752         -(cd doc/emacs; $(MAKE) $(MFLAGS) info)
 753         -(cd doc/misc; $(MAKE) $(MFLAGS) info)
 754         -(cd doc/lispref; $(MAKE) $(MFLAGS) info)
 755         -(cd doc/lispintro; $(MAKE) $(MFLAGS) info)
 756 dvi:
 757         (cd doc/emacs; $(MAKE) $(MFLAGS) dvi)
 758         (cd doc/misc; $(MAKE) $(MFLAGS) dvi)
 759         (cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)
 760         (cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)
 761
 762 #### Bootstrapping.
 763
 764 ### This is meant for Emacs maintainers only.  It first cleans the
 765 ### lisp subdirectory, removing all compiled Lisp files.  Then a
 766 ### special emacs executable is built from Lisp sources, which is then
 767 ### used to compile Lisp files.  The last step is a "normal" make.
 768
 769 .PHONY: bootstrap
 770 .PHONY: bootstrap-build
 771 .PHONY: bootfast
 772 .PHONY: maybe_bootstrap
 773
 774 maybe_bootstrap:
 775         @bar="`echo $(srcdir)/lisp/*.elc`"; \
 776         if [ \( "$$bar" = '$(srcdir)/lisp/*.elc' \) -o \( "$$bar" = '' \) ]; then \
 777           echo "Your tree does not include the compiled Lisp files."; \
 778           echo "You need to do \`make bootstrap' to build Emacs."; \
 779           echo "Emacs now requires Texinfo version 4.2."; \
 780           exit 1;\
 781         fi
 782
 783 bootstrap: bootstrap-clean-before FRC
 784         $(MAKE) $(MFLAGS) info bootstrap-build
 785
 786 bootfast: bootstrap-clean-before-fast FRC
 787         $(MAKE) $(MFLAGS) info bootstrap-build
 788
 789 bootstrap-build: FRC
 790         (cd lisp; $(MAKE) $(MFLAGS) bootstrap-prepare)
 791         (cd src; $(MAKE) $(MFLAGS) bootstrap)
 792         (cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs${EXEEXT})
 793         (cd src; $(MAKE) $(MFLAGS) mostlyclean)
 794         $(MAKE) $(MFLAGS) all
 795         (cd lisp; $(MAKE) $(MFLAGS) bootstrap-after)
 796
 797 ### Used for `bootstrap' to avoid deleting existing dumped Emacs executables.
 798 bootstrap-clean-before: bootstrap-clean-before-fast FRC
 799         (cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)
 800         (cd leim;     $(MAKE) $(MFLAGS) bootstrap-clean)
 801
 802 ### Used for `bootfast' to avoid deleting existing dumped Emacs executables
 803 ### and compiled .elc files.
 804 bootstrap-clean-before-fast: FRC
 805         (cd src;      $(MAKE) $(MFLAGS) mostlyclean)
 806         (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
 807         (cd lwlib;    $(MAKE) $(MFLAGS) clean)
 808         (cd lib-src;  $(MAKE) $(MFLAGS) clean)
 809         -(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)
 810         -(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)
 811         -(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)
 812         -(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)
 813         (cd leim;     $(MAKE) $(MFLAGS) clean)