1 2001-11-26 Richard M. Stallman <rms@gnu.org>
3 * Makefile.in: bootstrap should not delete dumped executables.
4 (bootstrap-clean-before): New target.
5 (bootstrap): Use bootstrap-clean-before instead of clean.
6 (bootstrap-clean-after): Renamed from bootstrap-clean. Calls changed.
8 2001-11-24 Eli Zaretskii <eliz@is.elta.co.il>
10 These changes add the Emacs Lisp Introduction manual to the
13 * Makefile.in (install-arch-indep, uninstall): Add ELisp Intro
16 * make-dist: Copy the files in lispintro directory.
18 * config.bat: Configure in the lispintro directory.
20 * configure.in (AC_OUTPUT): Add lispintro/Makefile.
22 * configure: Regenerated.
24 * Makefile.in (SUBDIR_MAKEFILES): Add lispintro.
25 (lispintro/Makefile): New target.
26 (mostlyclean, clean, distclean, maintainer-clean): Add lispintro.
27 (unlock, relock, info, dvi): Ditto.
29 2001-11-23 Eli Zaretskii <eliz@is.elta.co.il>
31 * Makefile.in (uninstall, install-arch-indep): Don't install
34 * make-dist (etc): Don't distribute gfdl.1.
36 2001-11-22 Colin Walters <walters@debian.org>
38 * Makefile.in (install-arch-indep): Install the calc .info files.
39 (uninstall): Handle deletion of calc .info files (thanks Pavel
42 2001-11-17 Eli Zaretskii <eliz@is.elta.co.il>
44 * make-dist (lispref): Add *.txt, *.el, permute-index, and
45 tindex.pl to the list of those being put into the distribution.
47 2001-11-16 Eli Zaretskii <eliz@gnu.org>
49 * configure.in: Add coff.h to the list in AC_CHECK_HEADERS.
51 * configure: Regenerated.
53 2001-11-15 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
55 * Makefile.in (uninstall): Fix previous change.
57 * configure: Regenerated.
59 * configure.in, Makefile.in: Add support for --program-prefix,
60 --program-suffix and --program-transform-name options.
62 2001-11-13 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
64 * Makefile.in (install-arch-indep): Use `${manext}' instead of
66 (install-arch-indep): Install emacsclient manual page.
67 (uninstall): Uninstall emacsclient manual page.
69 2001-11-12 Eli Zaretskii <eliz@is.elta.co.il>
71 * make-dist: Add lispref/index.*perm files to the distribution.
72 From Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>.
74 2001-11-12 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
76 * Makefile.in (uninstall): Remove gfdl.1 when uninstalling.
78 2001-11-10 Eli Zaretskii <eliz@is.elta.co.il>
80 * configure.in: AC_OUTPUT lispref/Makefile.
82 * configure: Regenerated.
84 2001-11-10 Eli Zaretskii <eliz@is.elta.co.il>
86 The following changes add the ELisp reference manual to the
89 * make-dist: Add the lispref directory to the distribution.
91 * Makefile.in (install-arch-indep): Add elisp* to the list of
93 (SUBDIR_MAKEFILES): Add lispref/Makefile.
94 (lispref/Makefile): New target.
95 (mostlyclean, clean, distclean, maintainer-clean, unlock, relock):
96 Add commands for the lispref directory.
99 * config.bat: Configure in `lispref'.
101 2001-11-09 Richard M. Stallman <rms@gnu.org>
103 * Makefile.in (bootstrap-lisp): Don't suppress error messages.
105 2001-11-07 Eli Zaretskii <eliz@is.elta.co.il>
107 * AUTHORS: Regenerate.
109 * make-dist (tempdir): Copy AUTHORS as well.
111 2001-11-06 Sam Steingold <sds@gnu.org>
113 * configure.in: Added a check for <nlist.h>
114 * configure: Regenerated.
116 2001-11-02 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
118 * configure: Regenerated.
120 2001-11-01 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
122 * configure.in: Reindent --help output.
123 From Per Starback (starback@ling.uu.se).
125 2001-10-31 Eli Zaretskii <eliz@is.elta.co.il>
127 * configure.in: New entry for HP/UX-11.
129 * Makefile.in (SOURCES): Replace GETTING.GNU.SOFTWARE with FTP.
130 From Eric S. Raymond <esr@golux.thyrsus.com>.
132 2001-10-28 Eli Zaretskii <eliz@is.elta.co.il>
134 * configure.in (s390-*-linux-gnu): New system. From Adam Thornton
135 <athornton@sinenomine.net>.
137 2001-10-25 Gerd Moellmann <gerd@gnu.org>
139 * Makefile.in (maybe_bootstrap): New target.
140 (all): Add to prerequisites to bootstrap if abbrev.elc doesn't
143 2001-10-24 Ken Raeburn <raeburn@gnu.org>
145 * configure.in: If --with-hesiod is given, look for
146 hes_getmailhost and res_send or __res_send; check hesiod and
147 resolv libraries respectively if system libraries don't supply
150 2001-10-24 Gerd Moellmann <gerd@gnu.org>
152 * configure.in: Use $MAKE for `make' if set.
154 2001-10-22 Gerd Moellmann <gerd@gnu.org>
156 * Makefile.in (install-arch-indep): Add -h (follow symlinks)
159 2001-10-20 Gerd Moellmann <gerd@gnu.org>
161 * (Version 21.1 released).
163 2001-10-20 Miles Bader <miles@gnu.org>
165 * configure.in (configuration): Set from `host' if `host_alias'
168 2001-10-19 Andreas Schwab <schwab@suse.de>
170 * configure.in: Make ready for autoconf 2.5x.
171 (AC_PREREQ): Require autoconf 2.50.
172 * aclocal.m4: Removed.
173 * configure: Regenerated.
174 * Makefile.in (${srcdir}/configure): Don't depend on aclocal.m4.
176 2001-10-13 Eli Zaretskii <eliz@is.elta.co.il>
178 * README: Bump Emacs version to 21.1.50.
180 2001-10-05 Gerd Moellmann <gerd@gnu.org>
184 2001-09-05 Gerd Moellmann <gerd@gnu.org>
186 * configure.in: Avoid `$@' which is handled specially in
187 Autoconf 2.52. From "Adam J. Richter" <adam@yggdrasil.com>.
189 2001-09-01 Eli Zaretskii <eliz@is.elta.co.il>
191 * make-dist (nt): Add subdirs.el to the list of distributed files.
193 2001-08-14 Eli Zaretskii <eliz@is.elta.co.il>
195 * configure.in (machine): Add an entry for
196 hppa1.1-hitachi-hiuxwe2*.
198 2001-05-28 Gerd Moellmann <gerd@gnu.org>
200 * make-dist (LANG): Set LC_ALL and LANGUAGE to C, unset
201 LC_MESSAGES and LANG. From Karl Eichwalder <keichwa@gmx.net>.
203 2001-05-14 Gerd Moellmann <gerd@gnu.org>
205 * make-dist: Copy texinfo.tex unconditionally.
207 2001-04-25 Eli Zaretskii <eliz@is.elta.co.il>
209 * Makefile.in (install-arch-indep): Add gfdl.1 to the man pages
212 2001-04-06 Gerd Moellmann <gerd@gnu.org>
214 * make-dist: Copy only `[a-z]*.{el,elc}' from leim/quail.
215 Don't copy quick-b5, quick-cns, tsang-b5, and tsang-cns files.
217 * make-dist: Handle leim/MISC-DIC. Only include
218 `[a-zA-Z]*.{el,elc}' from leim/quail.
220 2001-04-05 Gerd Moellmann <gerd@gnu.org>
222 * Makefile.in (install-arch-indep): Remove .cvsignore files.
224 2001-03-30 Gerd Moellmann <gerd@gnu.org>
226 * Makefile.in (.PHONY): Add for bootstrap targets.
227 (bootstrap-clean): New target.
228 (bootstrap): Use it instead of `clean'.
230 2001-03-29 Eli Zaretskii <a34785@is.elta.co.il>
232 * Makefile.in (SUBDIR): Remove leim.
233 (all, .RECURSIVE, extraclean): Add leim explicitly.
234 (leim): Provide separate rule which exports PARALLEL=0 into the
237 2001-03-20 Gerd Moellmann <gerd@gnu.org>
239 * configure.in (HAVE_XPM): Don't print the result of the check for
240 XpmReturnAllocPixels if we don't have an xpm.h.
242 2001-03-05 Gerd Moellmann <gerd@gnu.org>
246 2001-03-04 Eli Zaretskii <eliz@is.elta.co.il>
248 * config.bat: Update the copyright.
250 2001-02-23 Kenichi Handa <handa@etl.go.jp>
252 * configure.in: Use AC_EGREP_CPP to check if the C preprocessor
253 converts `..' to `. .'. If it converts, set CPP_NEED_TRADITIONAL
254 to `yes'. Later in AC_OUTPUT, check this variable.
256 2001-02-09 Dave Love <fx@gnu.org>
260 2001-02-06 Eli Zaretskii <eliz@is.elta.co.il>
262 * info/dir (Ebrowse): Fix the entry (was missing a dot).
264 2001-02-02 Gerd Moellmann <gerd@gnu.org>
266 * mkinstalldirs (errstatus): Chmod a+rx directories we create.
268 * Makefile.in (uninstall): Ignore exit code of `rm'.
270 * Makefile.in (uninstall): Remove more info files. Remove
271 ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
273 2001-01-31 Gerd Moellmann <gerd@gnu.org>
275 * noleim-Makefile.in (extraclean): Add.
277 2001-01-28 Gerd Moellmann <gerd@gnu.org>
279 * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
282 2001-01-24 Colin Walters <walters@cis.ohio-state.edu>
284 * Makefile.in (tags): Fix typo.
286 2001-01-13 Kenichi Handa <handa@etl.go.jp>
288 * configure.in: Fix typo in the code setting x_search_path.
290 2001-01-10 Dave Love <fx@gnu.org>
292 * configure.in: Don't reset LIBS at end of -lXmu test. Test for
294 (HAVE_XKBGETKEYBOARD): Fix reporting of result.
295 (HAVE_LIBXP): Remove -lXt from AC_CHECK_LIB.
296 (HAVE_XAW3D, HAVE_XPM, HAVE_JPEG, HAVE_PNG, HAVE_TIFF, HAVE_GIF):
297 Don't frob CFLAGS. Remove extra X libs from AC_CHECK_LIB
300 2001-01-08 Eli Zaretskii <eliz@is.elta.co.il>
302 * config.bat: Run the preprocessor with -traditional.
304 2001-01-01 Eli Zaretskii <eliz@is.elta.co.il>
306 * INSTALL: Move copying conditions to end of file.
308 2000-12-27 Eli Zaretskii <eliz@is.elta.co.il>
310 * INSTALL: Add basic installation procedure which assumes
311 `configure' does its job. Elaborate on image support libraries.
312 Add a pointer to Xaw3d library. Add advice about solving
313 configure-time problems by looking in config.log and setting
314 variables in the environment.
316 2000-12-27 Gerd Moellmann <gerd@gnu.org>
318 * Makefile.in (install-arch-indep): If tar fails, exit with
321 2000-12-19 Gerd Moellmann <gerd@gnu.org>
323 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
324 source file includes XKBlib.h. On some broken Solaris systems,
325 there is an XKBlib.h, reportedly, but header files included by
326 XKBlib.h are missing.
328 2000-12-14 Gerd Moellmann <gerd@gnu.org>
330 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
332 2000-12-11 Dave Love <fx@gnu.org>
334 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
336 2000-12-11 Paul Eggert <eggert@twinsun.com>
338 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
339 Merge fixes from latest GNU tar version. These macros no longer
340 futz with _XOPEN_SOURCE, as that was not portable in practice.
341 (AC_FUNC_FSEEKO): New macro.
343 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
346 2000-12-05 Dave Love <fx@gnu.org>
348 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
350 2000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
352 * info/dir: Change the category to "Emacs".
354 2000-12-01 Gerd Moellmann <gerd@gnu.org>
356 * make-dist (tempdir): Remove epaths.h from the distribution
359 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
361 * config.bat: Check for existence of djecho.exe, and print an
362 error message if it is not available.
364 * INSTALL: Describe possible problem with djecho.exe in old
365 versions of DJGPP v2.x.
367 2000-11-23 Gerd Moellmann <gerd@gnu.org>
369 * configure.in: Initialize HAVE_LIBXP to no.
371 2000-11-22 Gerd Moellmann <gerd@gnu.org>
373 * configure.in: Use m/macppc.h instead of the non-existent
376 2000-11-21 Gerd Moellmann <gerd@gnu.org>
378 * Makefile.in (install-arch-indep): Also install info/eshell*
381 * configure.in (HAVE_PNG): Check for the presence of
382 png_get_channels to rule out older PNG libs.
384 * configure.in (AC_OUTPUT): Arrange to emit definitions of
385 GCC and NON_GNU_CPP into config.status.
387 2000-11-20 Dave Love <fx@gnu.org>
389 * configure.in: Fix last change.
391 * GETTING.GNU.SOFTWARE: Deleted.
392 * FTP: New file to replace it.
393 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
395 2000-11-20 Gerd Moellmann <gerd@gnu.org>
397 * configure.in: Use -traditional with GNU cpp.
399 2000-11-17 Gerd Moellmann <gerd@gnu.org>
401 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
402 Distribute more files from the nt/ subdir. Distribute PBM
403 image files from subdirs of lisp/. Distribute old change logs
404 from subdirs of lisp/. Distribute play/5x5.el.
406 2000-11-11 Dave Love <fx@gnu.org>
408 * config.sub, config.guess: Updated from master source.
410 2000-11-07 Dave Love <fx@gnu.org>
412 * configure.in: Test for mkstemp.
414 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
416 * info/dir (Top): Rearrange menu items more logically, and put
417 them into a single category. Add menu items for RefTeX and
420 2000-10-29 Kai Gro
\e,A_
\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
422 * Makefile.in (install-arch-indep): Use --info-dir instead of
423 --dir-file, and a simple argument instead of --info-file, so that
424 the Debian version of install-info also works.
426 2000-10-19 Eric M. Ludlam <zappo@ultranet.com>
428 * info/dir (Speedbar): Add entry.
430 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
432 * INSTALL: Describe the new image-support options to the configure
433 script. List URLs where image support libraries can be found.
435 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
437 * info/dir (Top): Add an entry for Eshell.
439 2000-10-02 Dave Love <fx@gnu.org>
441 * configure.in: Check for gai_strerror.
443 2000-10-01 Andreas Schwab <schwab@suse.de>
445 * Makefile.in (install-arch-indep): Update list of installed info
448 2000-09-30 Gerd Moellmann <gerd@gnu.org>
450 * configure.in: Support `sparc*-*-netbsd*'.
452 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
454 * info/dir (MIME): Add entry for emacs-mime.
456 2000-09-29 Dave Love <fx@gnu.org>
458 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
460 2000-09-26 Gerd Moellmann <gerd@gnu.org>
462 * make-dist: Adapt to the change of leim/Makefile which was
463 necessary to ensure a reasonably working `make dist'.
465 * leim-Makefile.in: Moved to leim/Makefile.in..
467 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
469 2000-09-21 Kenichi Handa <handa@etl.go.jp>
471 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
472 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
473 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
475 (${TIT}): Adjusted for the above change.
476 (clean mostlyclean): Likewise.
477 (.el.elc): New target.
479 2000-09-19 Gerd Moellmann <gerd@gnu.org>
481 * make-dist: Include XPM and XBM files in lisp/ and subdirs
484 2000-09-18 Gerd Moellmann <gerd@gnu.org>
486 * make-dist (skk): Rename to `ja-dic' because the leim directory
489 2000-09-14 Dave Love <fx@gnu.org>
491 * configure.in: Fix spurion in last change.
493 2000-09-14 Gerd Moellmann <gerd@gnu.org>
495 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
496 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
497 to `no' if defined. Change result report.
499 2000-09-08 Dave Love <fx@gnu.org>
501 * configure.in: Remove spurious `@'s.
503 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
506 2000-09-06 Gerd Moellmann <gerd@gnu.org>
508 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
509 file and print informational message.
511 * configure.in (AC_FUNC_MMAP): Add.
513 2000-09-01 Gerd Moellmann <gerd@gnu.org>
515 * configure.in: Add ``checking'' messages for
516 XpmReturnAllocPixels.
518 2000-08-28 Gerd Moellmann <gerd@gnu.org>
520 * configure.in: Check <strings.h>; check `index' and `rindex'
523 2000-08-26 Kenichi Handa <handa@etl.go.jp>
525 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
526 "case "${canonical}" in".
528 2000-08-25 Dave Love <fx@gnu.org>
530 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
532 2000-08-25 Kenichi Handa <handa@etl.go.jp>
534 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
536 2000-08-24 Gerd Moellmann <gerd@gnu.org>
538 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
539 contains a relative path. Protect against unusable values of
542 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
544 * info/dir (WoMan): Add entry.
546 * config.bat (maindir): Update src/_gdbinit even if it does
549 2000-08-07 Gerd Moellmann <gerd@gnu.org>
551 * Makefile.in (config.status): Prepend `$(srcdir)/' to
554 2000-08-03 Gerd Moellmann <gerd@gnu.org>
556 * configure.in: Add support for ia64*-*-linux*.
558 2000-07-27 Gerd Moellmann <gerd@gnu.org>
560 * make-dist (aclocal.m4): Include in distribution.
562 2000-07-26 Dave Love <fx@gnu.org>
564 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
566 2000-07-24 Dave Love <fx@gnu.org>
568 * configure.in: Add AC_SIZE_T.
570 2000-07-18 Dave Love <fx@gnu.org>
572 * configure.in: Reorder so that most tests are done after CPPFLAGS
573 is set from the C_SWITCH_... definitions.
575 2000-07-10 Gerd Moellmann <gerd@gnu.org>
577 * configure.in (HAVE_XPM): Undo previous change. Check for
578 preprocessor define XpmReturnAllocPixels.
580 2000-07-06 Gerd Moellmann <gerd@gnu.org>
582 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
583 instead of XpmReadFileToPixmap.
585 2000-07-05 Ken Raeburn <raeburn@gnu.org>
587 * configure.in: Check for <soundcard.h>. Look for ossaudio
588 library, and set LIBSOUND accordingly.
590 2000-07-05 Dave Love <fx@gnu.org>
592 * configure.in: Use AC_HEADER_SYS_WAIT.
594 2000-07-05 Gerd Moellmann <gerd@gnu.org>
596 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
597 lisp/Makefile. Distribute lisp/Makefile.in instead of
600 2000-06-30 Ken Raeburn <raeburn@gnu.org>
602 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
603 while searching for image-handling libraries.
605 2000-06-26 Gerd Moellmann <gerd@gnu.org>
607 * configure.in (--with-xim): New option.
609 2000-06-23 Dave Love <fx@gnu.org>
611 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
612 for struct timezone and test how we can call gettimeofday.
613 Check for OSF 5+. Check for term.h.
615 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
618 2000-06-23 Gerd Moellmann <gerd@gnu.org>
620 * configure.in (HAVE_LIBXP): Change test for libXp.
622 2000-06-21 Dave Love <fx@gnu.org>
624 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
625 simple test for getloadavg and substitute GETLOADAVG_LIBS.
626 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
628 2000-06-19 Dave Love <fx@gnu.org>
630 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
631 _XOPEN_SOURCE is defined.
633 2000-06-16 Gerd Moellmann <gerd@gnu.org>
635 * Makefile.in (distclean): Also make distclean in lisp/.
637 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
639 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
641 2000-06-15 Gerd Moellmann <gerd@gnu.org>
643 * make-dist: Add --help and --snapshot options.
645 2000-06-14 Gerd Moellmann <gerd@gnu.org>
647 * configure.in: Generate lisp/Makefile.
649 * configure.in: Add support for `*-lynxos*'.
650 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
651 recommended by <Karen.Dorhamer@compaq.com> to fix problems
654 2000-06-13 Ken Raeburn <raeburn@gnu.org>
656 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
657 it's on a continuation line.
659 2000-06-02 Dave Love <fx@gnu.org>
661 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
664 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
665 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
668 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
669 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
671 2000-05-26 Gerd Moellmann <gerd@gnu.org>
673 * configure.in: Add check for speed_t typedef.
675 2000-05-25 Ken Raeburn <raeburn@gnu.org>
677 * Makefile.in (install-arch-dep): Install fns-*.el only if it
678 exists; it won't in the CANNOT_DUMP case.
680 2000-05-25 Gerd Moellmann <gerd@gnu.org>
682 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
683 On FreeBSD, the exit status is 1 if CDPATH is not set.
684 (install-arch-indep): Install ebrowse.info.
686 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
688 * configure.in: Check for grandpt and getpt.
690 2000-05-09 Dave Love <fx@gnu.org>
692 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
694 2000-05-05 Gerd Moellmann <gerd@gnu.org>
696 * make-dist: Make a link for lib-src/grep-changelog. Copy
699 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
701 * config.bat: Identify the beginning of the cpp stuff in
702 src/Makefile.in and lib-src/Makefile.in more accurately.
704 2000-04-27 Gerd Moellmann <gerd@gnu.org>
706 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
708 2000-04-19 Gerd Moellmann <gerd@gnu.org>
710 * configure.in: Add support for `powerpc-*-netbsd*'.
712 2000-04-19 Dave Love <fx@gnu.org>
714 * configure.in: Don't use AC_FUNC_GETLOADAVG.
716 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
718 2000-04-16 Dave Love <fx@gnu.org>
720 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
722 2000-04-14 Dave Love <fx@gnu.org>
724 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
726 * aclocal.m4 (AC_FUNC_MKTIME): New.
728 2000-03-28 Ken Raeburn <raeburn@gnu.org>
730 * configure.in: Line up "--help" output a little better.
732 2000-03-26 Gerd Moellmann <gerd@gnu.org>
734 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
736 (bootstrap): Rewritten in terms of the new targets above. Make
739 2000-03-12 Gerd Moellmann <gerd@gnu.org>
741 * config.guess, config.sub: Use the versions of the files from
744 2000-03-08 Dave Love <fx@gnu.org>
746 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
747 AC_C_VOLATILE. Define POINTER_TYPE.
749 * aclocal.m4: New file.
751 2000-03-02 Gerd Moellmann <gerd@gnu.org>
753 * configure.in (machine): Add `mipsel-*-netbsd*' and
756 2000-03-01 Gerd Moellmann <gerd@gnu.org>
758 * configure.in (machine): Add support for `*-auspex-sunos*'.
760 2000-02-29 Gerd Moellmann <gerd@gnu.org>
762 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
764 2000-02-18 Dave Love <fx@gnu.org>
766 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
768 2000-02-18 Andreas Schwab <schwab@suse.de>
770 * Makefile.in (install-arch-indep): Add eudc to list of installed
773 2000-02-17 Ken Raeburn <raeburn@gnu.org>
775 * configure.in: Include -lz and -ljpeg (if it's available) when
776 testing for the tiff library.
778 2000-02-17 Gerd Moellmann <gerd@gnu.org>
780 * configure.in: Remove LISP_FLOAT_TYPE.
782 2000-02-12 Dave Love <fx@gnu.org>
784 * configure.in: Use AC_FUNC_VFORK.
786 2000-02-01 Gerd Moellmann <gerd@gnu.org>
788 * make-dist: Various fixes for new development tree.
790 * leim-Makefile.in: New file.
792 2000-01-31 Gerd Moellmann <gerd@gnu.org>
794 * Makefile.in (dist): Call ./make-dist.
796 2000-01-24 Dave Love <fx@gnu.org>
798 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
800 2000-01-18 Gerd Moellmann <gerd@gnu.org>
802 * configure.in (HAVE_GIF): Check for DGifOpen instead of
805 2000-01-11 Andreas Schwab <schwab@suse.de>
807 * Makefile.in (install-arch-indep): Update list of info files to
810 2000-01-05 Dave Love <fx@gnu.org>
812 * configure.in: Check for jerror.h as well as libjpeg.
814 2000-01-03 Andreas Schwab <schwab@suse.de>
816 * Makefile.in (install-arch-indep): Install autotype*. Run
817 install-info on autotype and emacs-faq.info.
819 1999-12-04 Dave Love <fx@gnu.org>
821 * Makefile.in: (install-arch-indep): Depend on `info'.
822 (install-strip): Use `install' as sub-make target.
824 1999-11-23 Ken Raeburn <raeburn@gnu.org>
826 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
827 didn't need to be deleted. Check for the k5crypto library as well
828 as the crypto library; MIT Kerberos 1.1 changed the name.
830 1999-11-18 Dave Love <fx@gnu.org>
832 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
834 1999-11-11 Erik Naggum <erik@naggum.no>
836 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
838 1999-11-08 Dave Love <fx@gnu.org>
840 * configure.in: Fix change for --with-pop default.
842 1999-11-04 Dave Love <fx@gnu.org>
844 * configure.in: Default to --with-pop. Change sense of with-gcc
845 and with-toolkit-scroll-bars messages to reflect the defaults.
847 1999-11-01 Gerd Moellmann <gerd@gnu.org>
849 * INSTALL: Mention the Emacs Lisp Reference.
851 1999-10-27 Noah Friedman <friedman@splode.com>
853 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
855 1999-10-23 Gerd Moellmann <gerd@gnu.org>
857 * Makefile.in (bootstrap): New target.
859 1999-10-19 Paul Eggert <eggert@twinsun.com>
861 Add support for large files. Merge glibc 2.1.2.
863 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
864 (HAVE_TM_GMTOFF): New symbol.
865 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
867 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
869 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
871 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
872 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
874 1999-10-09 Richard M. Stallman <rms@gnu.org>
876 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
877 Unset CDPATH to prevent cd from generating output.
879 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
881 * update-subdirs: also ignore CVS subdirs.
883 1999-10-07 Gerd Moellmann <gerd@gnu.org>
885 * Makefile.in (install-arch-indep): Add ada-mode.
887 1999-10-06 Dave Love <fx@gnu.org>
889 * Makefile.in: Add rules for config.status, configure.
891 1999-09-07 Gerd Moellmann <gerd@gnu.org>
893 * configure.in (--with-sound): Removed.
895 1999-08-30 Gerd Moellmann <gerd@gnu.org>
897 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
899 (HAVE_TIFF): Add -lm to library check.
901 1999-08-28 Richard Stallman <rms@gnu.org>
903 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
904 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
905 after the other X-related libraries.
907 1999-08-21 Dave Love <fx@gnu.org>
909 * configure.in: Don't check for jpeglib.h.
911 1999-08-20 Gerd Moellmann <gerd@gnu.org>
913 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
914 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
916 1999-08-18 Dave Love <fx@gnu.org>
918 * configure.in: : Check for termcap.h.
920 1999-08-15 Gerd Moellmann <gerd@gnu.org>
922 * configure.in: Add --with-toolkit-scroll-bars. If "no",
923 use Emacs' scroll bars, even if configured for Motif or when
926 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
928 * configure.in: Check for getaddrinfo.
930 1999-08-04 Eli Zaretskii <eliz@gnu.org>
932 * config.bat: Make --no-debug work again by removing -gcoff.
934 1999-07-30 Dave Love <fx@gnu.org>
936 * configure.in: Check for stdlib.h.
938 1999-07-19 Dave Love <fx@gnu.org>
940 * configure.in: Grok sparc64-*-linux-gnu*.
942 1999-07-12 Richard Stallman <rms@gnu.org>
944 * Version 20.4 released.
946 1999-06-23 Karl Heuer <kwzh@gnu.org>
948 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
949 Quote $EMACS, in case it's a program with args.
951 1999-05-29 Richard M. Stallman <rms@gnu.org>
953 * configure.in: Delete the Kerberos stuff.
955 1999-05-27 Greg Hudson <ghudson@mit.edu>
957 * configure.in: Prefer kerberos 5 names.
959 1999-04-26 Richard M. Stallman <rms@gnu.org>
961 * configure.in: Check for libXp.
963 1999-04-08 Richard Stallman <rms@gnu.org>
965 * make-dist: Include change logs in subdirs of `lisp'.
967 1999-04-05 Richard Stallman <rms@gnu.org>
969 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
970 (install-arch-indep): Make ${datadir}/emacs world-readable.
972 1999-03-30 Eli Zaretskii <eliz@gnu.org>
974 * config.bat: Use epaths.* instead of paths.*.
976 1999-03-07 Eli Zaretskii <eliz@gnu.org>
978 * INSTALL: Add detailed instructions to unpack and install
981 1999-02-26 Richard Stallman <rms@gnu.org>
983 * configure.in: Use epaths.h and epaths-force instead of paths....
985 * Makefile.in (epaths-force): Renamed from paths-force;
986 operate on epaths.in and produce epaths.h.
988 1999-02-24 Richard Stallman <rms@gnu.org>
990 * make-dist: Fix nt/icons directory handling.
992 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
994 * configure.in (f301-fujitsu-uxpv4.1): New target.
996 1999-02-20 Richard Stallman <rms@gnu.org>
998 * make-dist (tempparent): Fix command to update info files.
1000 1999-02-09 Richard Stallman <rms@gnu.org>
1002 * configure.in (powerpc-apple-netbsd*): New alternative.
1004 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
1006 * make-dist: Include the new directory nt/icons in distributions.
1008 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
1010 * configure.in: Change message about HAVE_XFREE386.
1012 1999-01-07 Eli Zaretskii <eliz@gnu.org>
1014 * config.bat: Support configuring with leim.
1016 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
1018 * configure.in (mips-sgi-irix6.5): New target.
1020 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1022 * configure.in: Remove GSS-API support, since it has been removed
1025 1998-12-04 Markus Rost <rost@delysid.gnu.org>
1027 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
1029 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
1031 * Makefile.in: Don't install customize info file. Run
1032 install-info on viper info file.
1034 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
1036 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
1038 1998-11-16 Kenichi Handa <handa@etl.go.jp>
1040 * configure.in (*-*-bsdi4*): New target.
1042 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
1044 * configure.in: Fix previous change.
1046 1998-11-11 Richard Stallman <rms@gnu.org>
1048 * configure.in (aviion-intel): New machine.
1050 1998-11-04 Kenichi Handa <handa@etl.go.jp>
1052 * configure.in (mips-nec-sysv4*): New target.
1054 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
1056 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
1059 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
1061 * make-dist: Don't include fns*.el in dist.
1063 1998-10-30 Dave Love <fx@gnu.org>
1065 * configure.in: Don't mkdir cpp.
1067 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
1069 * Makefile.in (install-arch-dep): Install src/fns-*.el in
1072 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
1074 * Version 20.3 released.
1076 1998-07-30 Paul Eggert <eggert@twinsun.com>
1078 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
1079 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
1080 (lwlib/Makefile, leim/Makefile):
1081 Prepend $(srcdir)/ to rule dependencies outside this dir.
1083 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
1085 * configure.in: Use unset CDPATH instead of making it empty.
1087 1998-06-20 Karl Heuer <kwzh@gnu.org>
1089 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
1091 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
1093 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
1094 and default.el. Sort the results.
1096 1998-05-31 Karl Heuer <kwzh@gnu.org>
1098 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
1101 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
1103 * Makefile.in (install-arch-indep):
1104 Don't alter site-lisp/subdirs.el if it exists.
1106 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
1108 * Makefile.in (install-arch-indep): Put `-' on commands to create
1109 subdirs.el in site-lisp dirs.
1111 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
1113 * Makefile.in (install-arch-indep): Fix typo in previous change.
1115 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
1117 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
1119 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
1121 * Makefile.in (mkdir): Create the site-lisp dirs.
1122 (install-arch-indep): Make site-lisp/subdirs files world-readable.
1124 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
1126 * Makefile.in (INSTALL_INFO): New variable.
1127 (install-arch-indep): Don't replace the dir file if it already exists.
1128 Use the install-info program, via INSTALL_INFO, to add entries.
1129 Make the `info' subdir and the Info files world-readable.
1131 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
1133 * config.bat: Make sure the environment is large enough to support
1134 all the "set foo=bar" commands. Update pointers to DJGPP FTP
1137 1998-04-10 Karl Heuer <kwzh@gnu.org>
1139 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
1141 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1143 * configure.in: Add --with-gssapi to specify GSS-API
1144 authentication support for movemail.
1146 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
1148 * Makefile.in (install-arch-indep): Fix previous change.
1150 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
1152 * Makefile.in (info): Run man in build dir, not srcdir.
1154 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
1156 * Makefile.in (install-arch-indep): Fix previous change.
1158 1998-03-23 Kenichi Handa <handa@etl.go.jp>
1160 * Makefile.in (top_distclean): Check the existence of `lock'
1163 1998-03-22 Richard Stallman <rms@gnu.org>
1165 * Makefile.in (install-arch-indep): Put special subdirs.el files
1166 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
1168 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
1170 * make-dist: Fix shell syntax in check for missing .el or .elc files.
1172 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
1174 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
1175 (m68*-hp-hpux*): Handle versions 1X like 10.
1177 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
1179 * make-dist: PROBLEMS is now in etc, not top level dir.
1181 * Makefile.in (SOURCES): Delete PROBLEMS.
1183 1998-02-25 Richard Stallman <rms@gnu.org>
1185 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
1187 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
1189 1998-01-17 Richard Stallman <rms@gnu.org>
1191 * Makefile.in (install-arch-indep): Add semicolon before `else'.
1193 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
1195 * make-dist (tempparent): New option --no-check.
1197 * make-dist: Don't do anything with cpp directory.
1199 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
1201 * configure.in (sparc-fujitsu-sysv4*): New target.
1203 1997-12-17 Andreas Schwab <schwab@gnu.org>
1205 * configure.in: Cache more tests. Add missing quotes around
1206 message with embedded comma.
1208 1997-12-04 Karl Heuer <kwzh@gnu.org>
1210 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
1212 1997-11-26 Joel N. Weber II <devnull@gnu.org>
1214 * make-dist: Changed the comment about `umask 0' to say `Don't
1215 restrict access to any files.'; previously it said `Don't protect
1216 any files', which may have implied that we think fascism is good.
1218 1997-11-24 Paul Eggert <eggert@twinsun.com>
1220 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
1221 strftime needs the underlying host's strftime for locale dependent
1224 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
1226 * configure.in (i586-dg-dguxR4.*): New name in case branch.
1228 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
1230 * config.bat: Configure the man subdirectory.
1232 1997-11-07 Paul Eggert <eggert@twinsun.com>
1234 * configure.in (AC_CHECK_LIB): Add -lintl.
1236 1997-11-07 Karl Heuer <kwzh@gnu.org>
1238 * make-dist (check for .elc files): Avoid bash-specific syntax.
1239 (check for overflow 14-char limit): Simplify.
1241 1997-11-07 Richard Stallman <rms@gnu.org>
1243 * Makefile.in (install): Move blessmail last.
1245 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1247 * configure.in (gettimeofday, one arg or two):
1248 Clarify messages by avoiding double negative.
1250 1997-09-30 Karl Eichwalder <ke@suse.de>
1252 * Makefile.in (install-arch-indep): install the widget info file.
1254 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1256 * configure.in (with-pop, with-kerberos): Need to check Kerberos
1257 libraries in reverse order, so that libraries will appear in the
1258 correct dependency order on the link line (and so that the
1259 configure checks themselves will work properly when early
1260 libraries depend on later ones).
1262 1997-09-21 Erik Naggum <erik@naggum.no>
1264 * make-dist (making links to `src'): Keep timestamp on copied
1267 * make-delta: New script to produce delta distributions.
1269 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1271 * Version 20.2 released.
1273 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1275 * Version 20.1 released.
1277 * Makefile.in (install-leim): Depend on mkdir.
1278 (leim): Depend on src.
1280 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1282 * configure.in: Recognize alpha* instead of just alpha.
1284 1997-09-12 Paul Eggert <eggert@twinsun.com>
1286 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1288 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1290 * update-subdirs: Use rm -f.
1292 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1294 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1295 Ignore subdirs named Old.
1297 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1299 * configure.in: Add OpenBSD clause to set $machine.
1301 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1303 * make-dist: Recompile everything after updating various Lisp files.
1304 Recompile in leim as well as lisp.
1305 Check in leim as well as lisp for mismatched files and too-long names.
1307 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1309 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1311 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1313 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1314 before trying to copy anything from it.
1316 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1318 * Makefile.in (man/Makefile): New target.
1319 (tags): Define env var EMACS and run Makefile from build dir.
1321 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1323 * config.bat: If src/_gdbinit doesn't exist, try using
1324 src/.gdbinit to create it (for building on Windows 95).
1326 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1328 * Makefile.in (install-arch-indep):
1329 Discard extra data in tar | tar pipes.
1331 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1333 * configure.in (x_default_search_path): Corrected
1334 '${x_library}' to '${x_library}/X11'.
1336 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1338 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1340 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1342 * configure.in: Support auto-configuration of both Kerberos V4 and
1343 Kerberos V5 for movemail, including detection of V4 and V5 header
1344 files and libraries.
1346 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1348 * configure.in: Compute x_default_search_path
1349 and substitute into makefiles.
1351 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1353 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1355 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1357 1997-08-07 Erik Naggum <erik@naggum.no>
1359 * configure.in: Remove lockdir, it is no longer needed.
1360 * Makefile.in (mkdir): Don't create lockdir.
1361 (lockdir): Variable deleted.
1362 (paths-force): Don't operate on PATH_LOCK.
1364 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1366 * leim-Makefile.in (clean, distclean): New targets.
1368 * make-dist: Include leim/ChangeLog in leim distribution.
1370 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1372 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1374 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1376 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1378 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1380 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1382 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1384 * make-dist: Update leim/leim-list.el.
1385 Pass along value of $EMACS when updating lisp dir.
1387 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1389 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1390 prerequisite to the use of Doug Lea's malloc.
1392 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1394 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1396 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1398 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1400 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1402 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1404 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1407 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1409 * config.bat: Use `sed' instead of `cp', which might not be
1412 1997-07-09 Kenichi Handa <handa@etl.go.jp>
1414 * Makefile.in (mostlyclean): Add cleaning leim directory.
1415 (clean, distclean, maintainer-clean): Likewise.
1417 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1419 * make-dist (bogosities): Check subdirs of `lisp' also.
1421 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1423 * make-dist (etc): Really avoid symlinks now.
1424 (lisp): Don't delete from subdirs the things we never copy.
1426 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1428 * Makefile.in (install-arch-indep): Correct the target name.
1429 The first letter `i' was dropped by the previous change of mine.
1431 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1433 * configure.in (leim/Makefile): Generate this.
1434 (*-sysv4.2uw*): Recognize new alternative.
1436 * leim-Makefile.in: Renamed from leim-Makefile.
1438 * make-dist: Set up real-leim subdirectory,
1439 with the real contents of leim; then move it to
1440 a separate top-level directory.
1442 * make-dist: Don't mention site-lisp, site-init, site-start
1443 or default, when listing files hat are not compiled and should be.
1445 * configure.in: Create src/config.stamp at the end.
1447 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1449 * Makefile.in (install-leim): Correct previous change.
1451 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1453 * Makefile.in (install-leim): New target.
1454 (install): Depend on install-leim.
1456 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1458 * Makefile.in (SUBDIR): Add leim.
1459 (SUBDIR_MAKEFILES): Add leim/Makefile.
1460 (leim/Makefile): New target.
1462 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1464 * leim-Makefile: New file.
1465 * make-dist: Initialize a `leim' subdirectory with that makefile.
1467 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1469 * configure.in (GNU_MALLOC_reason): Fix message text.
1471 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1473 * make-dist (lisp): Don't process subdirs that start with =.
1474 (etc): Copy symlinks, as in src.
1476 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1478 * configure.in (i*86-*-unixware*): New alternative.
1480 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1482 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1483 and touch it explicitly.
1485 * configure.in (mips-sony-newsos6*): New alternative.
1486 (mips-*-linux-gnu*): New alternative.
1487 (*-*-bsdi*): New alternative.
1488 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1490 1997-06-22 Dave Love <d.love@dl.ac.uk>
1492 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1494 (src/config.h): New target to re-configure if src/config.in
1497 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1499 * configure.in (shutdown): Check for `shutdown' function.
1501 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1503 * update-subdirs: Include the directory "language" in subdirs.
1505 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1507 * configure.in (m88k-dg-dgux4*): New alternative.
1508 (alpha-*-netbsd*): New alternative.
1509 (powerpcle-*-solaris2*): New alternative.
1511 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1513 * make-dist: Warn about .el files that are not compiled.
1515 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1517 * Makefile.in (dist): Don't run update-subdirs here,
1518 since make-dist now gets that done.
1520 * make-dist: Use the new `updates' target in lisp/Makefile.
1522 * make-dist: Use new non-file targets in lisp/Makefile.
1524 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1526 * make-dist: Handle all subdirs of `lisp' uniformly.
1527 Don't handle `term' and `language' specially.
1528 Clear out umask at the beginning.
1530 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1532 * make-dist: Use Make to update finder-inf.el and autoloads.
1533 Also update cus-load.el.
1535 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1537 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1538 in case it is desirable to disable the GNU malloc features with
1541 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1543 * configure.in (DOUG_LEA_MALLOC):
1544 Define if malloc_{get,set}_state exist.
1546 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1548 * make-dist: Make links for files under lisp/language.
1550 1997-02-20 Kenichi Handa <handa@etl.go.jp>
1552 * update-subdirs: Exclude the directory "language" from subdirs.
1554 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1556 * configure.in: Check for rint and cbrt.
1558 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1560 * make-dist: Use $EMACS to say where to run Emacs.
1561 Add --no-update option.
1563 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1565 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1567 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1569 * make-dist (copying src): Check thoroughly for symlinks
1570 and copy them in all cases. Regularize the linking of *.in
1571 and *.opt and ChangeLog files.
1572 (copying lib-src): Likewise.
1573 Don't rm getdate.c or y.tab.*--they don't exist any more.
1575 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1577 * configure.in: Check for libmail, maillock.h and
1578 touchlock (for movemail).
1580 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1582 * configure.in (limits.h): Check for this file.
1584 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1586 * configure.in (rs6000-ibm-aix4.2): New alternative.
1587 (rs6000-ibm-aix4.0): New alternative.
1588 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1590 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1592 * configure.in: Recognize vax-*-netbsd*.
1594 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1596 * configure.in (locallisppath): Add leim directory.
1598 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1600 * config.bat: Make sure `mv' supports forward slashes and -f.
1602 1996-10-28 Christian Limpach <chris@nice.ch>
1604 * configure.in (hppa*-next-nextstep*): * added after hppa
1605 to accept hppa1.0 and hppa1.1.
1607 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1609 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1610 * configure.in (ld_switch_machine): Fix typo.
1612 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1614 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1615 from config.h and use them in $ac_link.
1617 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1619 * configure.in: Create a subdir named `lisp'.
1621 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1623 * configure.in: Check for getcwd.
1625 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1627 * configure.in: Check for termios.h. Check for setpgid.
1629 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1631 * configure.in: Check for setrlimit.
1633 1996-08-31 Paul Eggert <eggert@twinsun.com>
1635 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1637 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1639 * configure.in: Check for utimes.
1641 * configure.in: Check for com_err library, but only
1642 if --with-kerberos was used. Check for krb and des
1643 only if --with-kerberos.
1645 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1647 * Makefile.in (INSTALL_STRIP): New variable.
1648 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1649 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1651 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1653 * configure.in: Check for krb and des libraries.
1655 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1657 * configure.in (*-sunos4.1.[3-9]*noshare):
1658 Use sunos413, not sunos4-1-3.
1659 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1660 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1662 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1664 * Makefile.in (src/paths.h): Target deleted.
1665 (paths-force): Delete all dependencies on this target
1666 but don't delete the target.
1667 (install): Depend on `all'.
1668 (paths-force): Don't print a message.
1670 * configure.in: Generate src/paths.h here.
1672 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1674 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1675 New variables that affect linking only.
1676 (alpha-dec-osf*): Use those instead of previous change.
1678 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1680 * Makefile.in (install-arch-indep): Install info/messages.
1682 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1684 * Version 19.33 released.
1686 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1688 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1689 Fix previous change.
1691 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1693 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1696 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1698 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1699 and NON_GCC_TEST_OPTIONS.
1701 1996-08-06 Paul Eggert <eggert@twinsun.com>
1703 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1704 "TZ=..." in environ.
1706 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1708 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1710 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1712 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1713 the more general *-sunos4.1.[3-9]* clause.
1715 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1717 * Version 19.32 released.
1719 * configure.in (*-sco3.2v5*):
1720 Set OVERRIDE_CPPFLAG to a string of one space.
1721 Fix the code that uses OVERRIDE_CPPFLAG.
1723 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1725 * configure.in: Undo previous change.
1727 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1729 * config.sub: Use `pc', not `unknown', when canonicalizing
1730 the vendor for ...86.
1732 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1734 * configure.in: Check for termios.h header.
1736 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1738 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1740 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1742 * configure.in: Split bsdos2 and bsdos2-1.
1744 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1746 * config.sub: If last two words are not a recognized
1747 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1748 Make conversion of gnu/linux to linux-gnu really work.
1750 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1752 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1754 * configure.in (check for using Lucid widgets by default):
1755 Eliminate indentation that confuses some compilers.
1757 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1759 * config.sub: Convert linux and gnu/linux to linux-gnu.
1761 * make-dist: Don't update getdate.c.
1762 Ignore =... files when checking for too-long Lisp file names.
1764 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1766 * configure.in (euidaccess): Check for that, not for eaccess.
1768 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1770 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1772 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1774 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1776 * configure.in: Rename lignux to linux-gnu in configuration names.
1777 Use gnu-linux as the opsys value (s/ file name).
1778 Allow i686 just like i386, i486, i586.
1780 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1782 * configure.in (i*86-*-sco3.2v5): New alternative.
1783 (OVERRIDE_CPPFLAG): New variable.
1784 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1786 * configure.in: Specify vpath for .texi files.
1788 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1790 * configure.in: Always check for HAVE_X11R5.
1791 Separately decide whether to use a toolkit by default.
1793 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1795 * configure.in: If X11R5 is missing the Xaw headers,
1796 default to --with-x-toolkit=no.
1798 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1800 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1802 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1804 * Makefile.in (install-arch-indep): If cd etc makes output,
1805 don't treat that as part of the tar data.
1806 Check that ./lisp actually exists.
1808 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1810 * make-dist: Check for long file names.
1812 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1814 * Version 19.31 released.
1816 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1818 * configure.in: Recognize sparc-*-lignux.
1820 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1822 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1823 Don't include config.w95.
1825 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1827 * make-dist: Replace --no-clean-up and --no-tar options
1828 with --clean-up and --tar, so that the default is useful.
1830 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1832 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1833 if not, tell the user to rename it and abort.
1835 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1837 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1840 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1842 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1844 * make-dist (MANIFEST): Fix previous change.
1845 (msdos): Put mainmake.v2 into the dist.
1847 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1849 * make-dist: Exit if autoconf fails.
1851 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1853 * config.bat: Set djgpp-ver, and unset it at the end.
1854 Add a number of conditionals for DJGPP version 2.
1855 Rename label libsrc2 to libsrc3.
1856 Substitute for LDFLAGS in src/Makefile.
1857 Substitute for ALL_CFLAGS in lib-src/Makefile.
1859 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1861 * configure.in (ncurses): Check this after checking fns like strerror.
1863 1996-04-08 Erik Naggum <erik@naggum.no>
1865 * make-dist (MANIFEST): Don't include lines from =files.
1867 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1869 * make-dist: Don't put lisp/dired.todo in the dist.
1871 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1873 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1875 * configure.in (setlocale): Check for it.
1877 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1879 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1881 * configure.in: Use lignux instead of linux as value of opsys.
1883 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1885 * Makefile.in (install-strip): Fix whitespace.
1886 Get rid of continuation.
1888 * config.sub: Convert linux or gnu/linux to lignux.
1890 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1892 * configure.in: Accept lignux in configuration name.
1894 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1896 * Makefile.in (install-strip): New target.
1898 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1900 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1901 -f failed to do the job on Suns.
1903 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1905 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1907 * configure.in (linux/version.h): Check for this header.
1909 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1911 * configure.in: Remove -fno-builtin hackery from -lm check.
1913 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1915 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1918 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1920 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1922 * configure.in: Check for ncurses.
1924 1996-02-28 Paul Eggert <eggert@twinsun.com>
1926 * configure.in (LOCALTIME_CACHE):
1927 Also define if localtime mishandles unsetting TZ.
1928 This works around a localtime bug in mips-dec-ultrix.
1930 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1932 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1934 * configure.in: Improve messages about X versions.
1936 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1938 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1940 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1942 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1943 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1945 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1946 (install): Put install-arch-indep before install-arch-dep.
1948 1996-02-20 Dave Love <d.love@dl.ac.uk>
1950 * INSTALL: Clarify info about MS-DOS path handling.
1952 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1954 * Makefile.in (install-arch-indep): Install info/ccmode*.
1955 In previous change, protect against /bin/pwd returning null string.
1957 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1959 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1962 1996-02-01 Paul Eggert <eggert@twinsun.com>
1964 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1966 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1968 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1970 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1972 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1973 we delete everything distclean deletes.
1975 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1977 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1979 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1981 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1982 into LDFLAGS instead of into LIBS.
1984 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1986 * configure.in (HAVE_XMU): Fix typo in previous change.
1988 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1990 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1992 1996-01-10 Erik Naggum <erik@naggum.no>
1994 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1996 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
1998 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
2000 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2002 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
2003 and use -lXt to link it.
2005 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2007 * configure.in (locallisppath): Put version-specific dir first.
2009 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2011 * configure.in (hppa-*-nextstep*): New alternative.
2012 (USE_X_TOOLKIT): By default, set this to "maybe";
2013 and change that later to LUCID or "no" according to X11 version.
2015 * make-dist: Recompile outdated .elc files and update all autoloads.
2017 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2019 * configure.in (locallisppath): Fix typo in last change: " -> '.
2021 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2023 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
2025 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2027 * Makefile.in (install-arch-indep): Give all files read permission.
2029 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2031 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
2032 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
2034 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2036 * configure.in: Determine HAVE_X11R6.
2037 (HAVE_MENUS): Renamed from HAVE_X_MENU.
2039 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2041 * configure.in: Just "solaris" now defaults to version 2.4.
2042 Add sunos4.1.n-noshare as alternative.
2044 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2046 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
2048 1995-11-29 Erik Naggum <erik@naggum.no>
2050 * Makefile.in (install-arch-indep): Add missing backslash.
2052 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
2054 * Makefile.in (install-arch-indep): Don't install
2055 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
2057 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2059 * Makefile.in (install-arch-indep): Fix previous change.
2061 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
2063 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2065 * Version 19.30 released.
2067 * make-dist (lisp): Exclude subdirs.el.
2069 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2071 * make-dist (etc): Delete *.orig and *.rej.
2073 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2075 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
2077 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2079 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
2081 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
2083 * make-dist (nt): Rename install, readme, and todo to
2084 INSTALL, README, and TODO.
2086 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2088 * make-dist (lisp): Don't distribute site-start.
2090 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
2092 * make-dist: Break the hard link on alloca.c.
2094 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2096 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
2098 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2100 * make-dist (src, lib-src): Don't distribute Makefile.c.
2101 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
2103 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2105 * Makefile.in (mkdir): Create man1dir, not mandir.
2106 (uninstall): Use man1dir, not mandir.
2108 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2110 * Makefile.in (man1dir): New variable.
2111 (install-arch-indep): Use man1dir.
2113 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
2115 * make-dist: Create lisp/MANIFEST.
2117 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2119 * configure.in (m68k-*-linux*): New alternative.
2121 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2123 * make-dist: Use new names config.in, paths.in, and
2124 {src,lib-src}/Makefile.in.
2126 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2128 * configure.in: Don't bother checking for drem.
2130 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2132 * Makefile.in (distclean): Delete line with just a tab in it.
2133 (install-arch-indep): Delete spaces that precede tabs.
2134 Delete spurious `fi' left from previous change.
2135 (install): Supply `true' as command, to avoid null command.
2137 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2139 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
2141 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2143 * configure.in (powerpc-*-solaris2): New alternative.x
2145 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
2147 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
2148 of paths.h.tmp$$, to avoid going beyond 14 characters.
2150 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2152 * configure.in: Improve error msg for invalid --with-x-toolkit value.
2154 1995-09-06 Paul Eggert <eggert@twinsun.com>
2156 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
2157 if localtime caches TZ. Check for tzset.
2159 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2161 * config.bat: Simplify using new names file names src/makefile.in,
2162 config.in, paths.in. Change Echo commands not to use `.
2164 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2166 * Makefile.in (install-arch-indep): Always install the new dir file;
2167 rename the previous dir file to dir.bak or dir.old.
2169 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2171 * configure.in (RANLIB): Substitute this into makefiles.
2172 Set it specially on solaris; set it by default on other systems.
2174 * configure.in: Fix previous Alpha change.
2176 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2178 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
2179 NON_GCC_TEST_OPTIONS.
2181 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2183 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
2184 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
2186 * configure.in (alpha-*-linux*): New configuration.
2188 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2190 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
2191 (m68k-next-nextstep*): New alias for that.
2192 (i*86-*-nextstep*): Use nextstep.h.
2193 (sparc-*-nextstep*): New configuration.
2195 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2197 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
2198 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
2200 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2202 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
2203 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
2205 1995-07-18 Mike Long <mike.long@analog.com>
2207 * make-dist: Fix update of finder-inf.el, and byte-compile it.
2209 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2211 * Makefile.in (src/paths.h, paths-force):
2212 Rename src/paths.h.in to src/paths.in.
2213 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
2215 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
2216 Use Makefile.c for intermediate file.
2217 Rename src/config.h.in to src/config.in.
2219 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
2221 * configure.in (mips-dec-ultrix*): Assume version 4.3.
2222 (mips-dec-ultrix4.[12]): New alternative for old versions.
2224 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2226 * make-dist: Don't break intra-tree links.
2228 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2230 * configure.in: Put back archlibdir initialization. Require
2231 autoconf 2.4.1 or later.
2233 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2235 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
2236 (mips-mips-riscos5*): New alternative.
2238 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2240 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
2242 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2244 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
2245 (mandir, infodir, archlibdir): Initializations deleted.
2247 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
2248 On hpux9shr, use hpux9shxr4.h.
2250 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
2252 * configure.in: Added target mips-dec-mach_bsd4.3.
2253 * config.guess: Guess mips-dec-mach_bsd4.3.
2255 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2257 * Makefile.in (mkdir): Use symbolic chmod.
2259 1995-06-22 Paul Eggert <eggert@twinsun.com>
2261 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2262 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2264 1995-06-22 Paul Eggert <eggert@twinsun.com>
2266 * Makefile.in (SUBDIR_MAKEFILES):
2267 Add man/Makefile, so `make distclean' removes it.
2268 (top_distclean): Add config.log to the list of files to be removed.
2270 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2272 * Version 19.29 released.
2274 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2276 * configure.in: Fix the previous change to verify that the -b
2277 option really solves the problem.
2279 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2281 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2283 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2285 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2287 * configure.in: Report more clearly when there is no special
2288 dir to search for X includes or libraries.
2290 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2292 * configure.in: Check for -lpthreads, not -lpthread.
2294 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2296 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2298 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2300 * configure.in: Check for -lpthread.
2302 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2304 * Makefile.in (install-arch-indep): Install info files for mh-e.
2305 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2307 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2309 * configure.in (*-solaris2.5): New configuration.
2311 * make-dist: Copy new files config.nt and config.w95.
2313 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2315 * configure.in: Use x_includes, not x_libraries, for -I.
2316 Make bitmapdir a colon-separated list.
2318 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2320 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2322 * configure.in: Allow x_libraries and x_includes to be paths.
2324 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2326 * configure.in: Fix typo.
2328 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2330 * INSTALL: Clarify use of site-init.el.
2332 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2334 * configure.in: pass arg to sqrt.
2336 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2338 * make-dist: Fix May 6 change.
2340 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2342 * vpath.sed: Delete reference to ymakefile.
2344 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2346 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2349 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2351 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2353 * update-subdirs: Specify /bin/sh to run the script.
2355 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2357 * make-dist: Put src/makefile.nt in dist.
2359 * configure.in (i[345]86-*-bsdi2*): New configuration.
2360 (vax-dec-bsd386*): Deleted.
2362 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2364 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2365 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2366 instead of logb in -lm check.
2368 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2370 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2371 Use bsd4-3. Don't set NON_GNU_CPP.
2373 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2374 In nt. copy various different things, but not *.cmd.
2375 Fix the ln commands for the subdirs of nt.
2377 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2379 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2381 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2383 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2384 since that's what the header file expects.
2386 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2388 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2389 and 68040 based machines when choosing options for gnucc.
2391 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2393 * Makefile.in (top_distclean): Delete config.cache.
2395 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2397 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2399 * configure.in: Use m/ncr386.h.
2401 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2403 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2405 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2407 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2408 (man): Don't copy texindex.c and getopt.c; they're deleted.
2409 (etc): Omit `e'; it's a subdirectory.
2410 (etc/e): Use `../..', not `..', to reference top level.
2412 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2414 * Makefile.in (install-arch-indep, dist):
2415 look for `update-subdir' in $(srcdir).
2417 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2419 * make-dist: Include mkinstalldirs in distribution.
2421 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2423 * make-dist: Add missing close backquote.
2425 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2427 * make-dist: Don't distribute shortnames directory.
2429 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2431 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2433 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2435 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2437 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2439 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2441 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2443 * configure.in (mips-sgi-irix6): New configuration.
2445 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2447 * Makefile.in (maintainer-clean): Renamed from realclean.
2449 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2451 * configure.in: Create a .gdbinit that sources the real one, if
2452 using a different build directory.
2454 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2456 * configure.in: Check for sys/select.h.
2458 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2460 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2462 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2464 * configure.in: Handle isc 4.1 operating system.
2466 1994-12-10 Richard Stallman <rms@kepa>
2468 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2469 (rs6000-ibm-aix4*): New alternative.
2471 1994-12-06 Richard Stallman <rms@kepa>
2473 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2475 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2477 * configure.in: Don't try to make directories that are guaranteed
2480 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2482 * configure.in: Generate man/Makefile from man/Makefile.in.
2483 Create the man subdir.
2485 * Makefile.in (dvi): Run Make in our man subdir.
2487 * make-dist: Create subdir etc/e.
2489 Put man/Makefile.in in dist, instead of man/Makefile.
2491 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2493 * configure.in: Add --with-pop, --with-kerberos, and
2494 --with-hesiod for movemail.
2496 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2498 * configure.in (m68*-apollo*): Use s/domain.h.
2500 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2502 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2504 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2506 * configure.in: Don't add -I, -L, -R options for cc if their
2507 arguments would be empty.
2509 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2511 * configure.in (i860-intel-osf1*): New alternative.
2512 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2513 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2515 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2517 * configure.in: Make h_errno check not use nested functions.
2519 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2521 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2523 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2525 * Makefile.in (install-arch-indep): Avoid continued comment
2526 swallowing target line.
2528 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2530 * configure.in: Protect a character class with `changequote'.
2532 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2534 * configure.in: Accept `news' as a synonym for `newsos'.
2536 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2538 * Makefile.in: Don't rm files if cd fails.
2540 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2542 * make-dist: Put nt subdir and its subdirs in the dist.
2543 (lib-src): Put makefile.nt in the dist.
2544 (lisp): Put makefile.nt in the dist.
2546 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2548 * configure.in: Change a stray `[' to `test'.
2550 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2552 * configure.in: Adapt for Autoconf v2. Use the standard argument
2553 parser, host type canonicalizer, X11 finder, and message
2554 printing macros. Use the new macro names. Use `test' instead of `['.
2556 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2558 * configure.in: Check for getpagesize.
2560 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2562 * make-dist (msdos): Put sed* in the distribution.
2564 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2566 * config.bat: New option, `--with-x', for configuring Emacs
2567 for use with the X11 system DesqView/X.
2568 New option, `--no-debug', for compiling Emacs without debug
2569 information thus saving disk space.
2570 (src/config.h, src/paths.h): Use `update' (which is like
2571 `move-if-changed') to change the file.
2572 (src/config.h): When configuring for X11 perform extra changes.
2573 (src/makefile): When configuring for X11 perform extra changes.
2574 (lib-src): Remove temporary files.
2575 (): Check that `sed', `rm', `mv', and `gcc' are available.
2577 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2579 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2581 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2583 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2585 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2587 * configure.in (canonical): Substitute var into makefiles.
2588 (bitmapdir): Likewise.
2590 * Makefile.in (bitmapdir): New variable.
2591 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2593 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2595 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2597 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2598 * update-subdirs: New shell script.
2600 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2602 * Makefile.in (top_distclean): Don't rm build-install.
2603 (SOURCES): Delete build-install.in.
2605 * make-dist: Don't distribute build-ins.in.
2606 * build-ins.in: File deleted.
2608 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2610 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2612 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2614 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2616 * configure.in (libexecdir): Renamed from libdir. New default.
2617 (sharedstatedir): Renamed from statedir. New default.
2618 (datadir): New default.
2620 * make-dist: Don't distribute subdirs.el.
2622 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2624 * configure.in (eaccess): Check for it.
2626 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2628 * configure.in (mktime): Check for it.
2630 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2632 * configure.in (motif): Add support for usage and option checking.
2634 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2636 * configure.in (utimes): Check for it.
2638 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2640 * Makefile.in (install-arch-indep): Don't do mkdir here.
2642 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2644 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2645 riscix.h renamed to acorn.h.
2647 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2649 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2652 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2654 * configure.in: Remove trailing slashes from srcdir.
2656 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2658 * configure.in (i[345]86-sequent-ptx*): Handle
2660 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2662 * Makefile.in (paths-force): Depend on src/paths.h
2664 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2666 * configure.in (config_options): Save all arguments, not just some.
2668 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2670 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2672 * configure.in: Add AC_AIX.
2673 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2675 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2677 * configure.in (parsing options): Simplify sed command to delete -'s.
2679 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2681 * configure.in (config_options): New shell variable.
2682 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2684 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2686 * configure.in (alpha-dec-osf*): New target.
2688 * Makefile.in: Use just one FRC target.
2690 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2692 * Makefile.in (removenullpaths, paths-force):
2693 Use name paths.h.tmp$$, which depends on the pid.
2695 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2697 * Makefile.in (removenullpaths, paths-force):
2698 Put paths.h.tmp in top-level dir, not in src.
2700 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2702 * Version 19.27 released.
2704 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2706 * Version 19.26 released.
2708 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2710 * configure.in: Check for lrand48, not rand48.
2712 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2714 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2715 (powerpc-ibm-aix*): New aliases.
2717 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2719 * make-dist (src/m, src/s): Put *.inp in distribution.
2721 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2723 * configure.in: Accept i586 and i486 along with i386.
2725 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2727 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2728 even if CPP env var was set by the user.
2730 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2732 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2734 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2736 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2738 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2740 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2742 * configure.in: Check more specifically for i*86-sun-sunos.
2744 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2746 * configure.in: Handle solaris 2.4.
2748 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2750 * configure.in (rand48): Check for it.
2752 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2754 * make-dist: Update the info files.
2756 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2758 * configure.in: Make "checking..." messages' style consistent.
2759 (HAVE_H_ERRNO): New test.
2761 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2763 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2765 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2767 * configure.in (CFLAGS): If the envvar was specified, use that.
2768 And set REAL_CFLAGS from it too.
2770 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2772 * make-dist: Update finder-inf.el.
2774 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2776 * make-dist (msdos): Include sed4.inp in dist.
2778 * Makefile.in (libsrc_libs): Var deleted.
2780 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2782 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2784 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2786 * configure.in (mips-sony-newsos4*): New alias.
2788 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2790 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2791 (*-convex-convexos*): Accept this as alias.
2793 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2795 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2796 for two different uses.
2798 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2800 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2802 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2804 * make-dist: Put ./BUGS into the distrib.
2806 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2808 * configure.in: Handle 386 running Solaris 2.
2810 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2812 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2814 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2816 * configure.in (mips-sony-newsos*): Use news-risc.h.
2818 * configure.in: Accept bsdi as opsys, like bsd386.
2820 1994-06-01 Morten Welinder (terra@diku.dk)
2822 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2824 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2826 * Version 19.25 released.
2828 * make-dist (shortversion): Don't assume another period follows.
2830 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2832 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2833 (uninstall): Use /bin/pwd.
2835 * Makefile.in (blessmail): Depend on src.
2836 (all): Don't depend on blessmail.
2838 * Makefile.in (src/paths.h): Don't force recomputation.
2839 (paths-force): New target; force recomputation of paths.h.
2840 (all): Depend on paths-force.
2841 (src, lib-src): Depend on src/paths.h.
2843 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2844 NON_GCC_TEST_OPTIONS.
2846 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2848 * configure.in: Don't insist on subversions for irix.
2850 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2852 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2854 * configure.in (i[34]86-next-*): New alternative.
2856 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2858 * Version 19.24 released.
2860 * configure.in: New config hppa*-hp-hpux9shr*.
2862 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2864 * config.bat: Doc fix.
2866 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2868 * Makefile.in (mostlyclean, clean, distclean, realclean)
2869 (extraclean): Don't act on man subdir if it doesn't exist.
2871 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2873 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2874 Use them to set up CC.
2875 (*-sun-sunos4.1.3): Set them.
2877 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2879 * Makefile.in (lib-src): Don't depend on src/paths.h.
2881 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2883 * build-ins.in (copydests): Get rid of spurious `-'s.
2885 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2887 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2889 * Version 19.23 released.
2891 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2892 for the Xlib and Xt checks; then restore old CFLAGS.
2894 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2896 * configure.in (HAVE_X11XTR6): Add newline before #if.
2897 Add newline after #endif.
2899 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2901 * configure.in (HAVE_X11XTR6): Arrange to define it.
2903 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2905 * Makefile.in (install): Depend on blessmail.
2907 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2909 * configure.in (mips-siemens-sysv*): Put quotes around value
2912 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2914 * Makefile.in (TAGS): Use the makefile in src subdir.
2916 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2918 * configure.in (opsys): Recognize `gnu'.
2920 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2922 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2924 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2926 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2929 1994-05-08 Morten Welinder (terra@diku.dk)
2931 * config.bat: Forcibly remove "# " style comments from makefiles.
2933 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2935 * Makefile.in (uninstall): When processing lispdir and etcdir,
2936 do nothing unless it exists and is a directory.
2938 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2940 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2941 Merge code in from install-doc.
2942 (install-doc): Merge code back into install-arch-indep.
2943 (install-arch-dep): Don't depend on install-doc.
2945 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2947 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2949 * configure.in (making src/Makefile and lib-src/Makefile):
2950 Split off the autoconf substitutions and don't pass them thru cpp.
2951 (undefs): Use $canonical as well as $configuration.
2953 * make-dist: Distribute lisp/Makefile.
2955 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2956 Use lower case names for the s files.
2958 1994-05-03 Morten Welinder (terra@diku.dk)
2960 * config.bat: Added possibility for different file name
2961 transscriptions in lib-src.
2963 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2965 * Makefile.in (lib-src): Undo previous change.
2966 (blessmail): New target to run maybe-blessmail in lib-src.
2967 (all): Depend on blessmail.
2969 * Makefile.in (lib-src): Depend on src.
2971 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2973 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2974 (m88k-dg-dgux5.4R2): dgux5.4R2.
2976 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2978 * configure.in (window_system): Restore accidentally deleted code
2979 that uses AC_FIND_X.
2981 * make-dist: Distribute config.bat.
2983 1994-04-29 Morten Welinder (terra@diku.dk)
2985 * config.bat: Corrected the configuration of lib-src
2986 to keep up with configure. Add note about dos version 3
2987 or better needed (djgpp needs that). Add note explaining
2988 that either install in c:/emacs or edit the script.
2989 Don't change to c:/emacs, but assume we're there (to minimize
2990 the number of places to change).
2992 * config.bat: Build-in the first step towards X11 support with
2993 the X11 emulator that exists. At this time it won't work,
2994 and several files are missing.
2996 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2998 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2999 Don't look for -lresolv.
3001 * Makefile.in (lib-src): Depend on src/paths.h.
3003 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3005 * configure.in: Restore deleted AC_SUBST of `configuration'.
3006 Improve error message for bad --with-x-toolkit value.
3008 * configure.in: Define CONFIGURATION in src/config.h
3009 rather than substituting in src/Makefile.in.
3011 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3013 * Makefile.in (install-doc): New target.
3014 (install-arch-dep): Depend on install-doc.
3015 (mkdir): Create docdir.
3017 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3019 * configure.in: Test for libresolv.a.
3020 Substitute machfile and opsysfile.
3022 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3024 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
3025 (install-arch-dep): Install under the name $(EMACS).
3027 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3029 * configure.in (version): Use entire value of emacs-version.
3030 (mips-siemens-sysv*): New alternative.
3032 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3034 * Makefile.in (install-arch-indep): Don't install dired-x*.
3036 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3038 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
3039 Fix definition of $undefs.
3041 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3043 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
3045 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
3047 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
3049 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
3051 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3053 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
3054 and run it thru cpp, as with src/Makefile.in.
3056 * configure.in: Use AC_SET_MAKE.
3058 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3060 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
3062 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3064 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
3066 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
3067 (printing the choices): Make the toolkit message unconditional.
3068 (USE_X_TOOLKIT): Use `none', not `no', if none.
3069 (include libsrc_libs): Include config.h, and specify -I for srcdir.
3070 Get rid of temp file foofoo1.
3072 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3074 * configure.in (CFLAGS): Use shell syntax, not Makefile.
3076 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3078 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
3079 (printing the choices): State choice of toolkit.
3080 (libsrc_libs): Recalculate after writing config.h;
3081 then update lib-src/Makefile.
3083 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3085 * configure.in: Add sunos4shr as alternative for suns.
3086 Conditionals testing for null $CC were backwards.
3088 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3090 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
3092 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3094 * configure.in: Handle -isc4.0*.
3096 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3098 * configure.in (esix5): Set NON_GNU_CPP.
3100 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
3102 * Makefile.in (thisdir): Nonsensical variable removed.
3103 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
3104 back to $thisdir, rather than the directory `this_dir'.
3106 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3108 * Makefile.in (install-arch-indep): Add missing backslash after a
3111 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3113 * Makefile.in (thisdir): New variable.
3114 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
3116 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3118 * configure.in: Add freebsd.
3120 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3122 * configure.in: Check for fpathconf.
3124 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3126 * configure.in (with_x_toolkit): Fix typo in previous change.
3128 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3130 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
3132 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3134 * configure.in (with_x_toolkit): Don't allow motif or open-look.
3136 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3138 * configure.in: Fix value of docdir.
3139 * Makefile.in (install-arch-indep): Install DOC* in docdir.
3141 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3143 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
3145 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
3147 * configure.in: New variable docdir to control where the docstring
3149 Makefile.in: Use it to initialize PATH_DOC in paths.h.
3151 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3153 * configure.in: When --run-in-place, don't inherit archlibdir.
3155 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3157 * Makefile.in (install-arch-dep, install-arch-indep):
3158 New targets split up former do-install rule.
3159 (do-install): Target deleted.
3161 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3163 * configure.in (mips-sony-newsos*): New configuration.
3165 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
3167 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
3169 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3171 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
3173 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3175 * configure.in: Don't initialize CC.
3177 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3179 * configure.in (creating src/Makefile): Also generate -U switches
3180 for symbols in the $configuration value.
3182 * configure.in: Check for sys_siglist being declared in system header.
3184 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3186 * configure.in (creating src/Makefile): Delete blank lines
3187 along with lines of whitespace.
3188 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
3190 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3192 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
3193 like C_SWITCH_SYSTEM.
3194 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
3196 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3198 * configure.in (drem): Check for this function.
3200 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3202 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
3203 If CPP was inherited from environment, don't use NON_GNU_CPP.
3204 (NON_GNU_CC): Likewise.
3205 (handling with_gcc): Use explicit if in the `no' case.
3206 (cc_specified): New variable; if set, don't use NON_GNU_CC.
3208 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3210 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
3212 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3214 * configure.in: Check whether fmod exists.
3216 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3218 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
3219 {src,lisp}/OChangeLog.
3221 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3223 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
3224 necessary for proper operation. This code works with the current
3225 released version of Autoconf.
3227 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3229 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
3230 (USE_X_TOOLKIT): Define it for all values except `no'.
3232 * configure.in: Undo first Jan 8 change and Jan 16 change.
3234 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3236 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
3237 Substitute USE_X_TOOLKIT as both C macro and Make variable.
3239 * Makefile.in (lwlib/Makefile): New target.
3240 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
3241 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
3242 (unlock, relock): Handle lwlib subdir.
3244 * Makefile.in: Add some .PHONY targets.
3246 * make-dist: Handle lwlib subdir like oldXMenu subdir.
3248 * lwlib: New subdirectory.
3250 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3252 * configure.in: If CPP has a value that is a directory,
3255 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3257 * configure.in (srcdir_undefs): Add g flag to sed substitution to
3260 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3262 * Makefile.in (do-install): Install the dired-x info files.
3264 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3267 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3269 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3271 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3273 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3274 AC_OUTPUT as it should be; hopefully noone will again see fit to
3275 gratuitously break this and not make a change log entry.
3276 Optimized sed processing of Makefile.in and cpp output; now
3277 preserves comments previously removed from the cpp input.
3278 Eliminated temp file for cpp output. Generate -U switches to
3279 undefine all identifiers that appear in the directory name
3280 ${srcdir}; pass these to cpp.
3282 * configure.in (version): Fix sed regexp to match two-elt version
3285 * configure.in: Check for strerror.
3287 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3289 * configure.in: Test for bcmp.
3291 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3293 * make-dist (tempdir): Put subdir msdos into the distribution.
3295 1993-01-07 Morten Welinder (terra@diku.dk)
3297 * config.bat: New file.
3299 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3301 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3303 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3305 * configure.in (m68*-next-*): Don't care about which os is specified.
3306 (i[34]86-*-*): Check for *-nextstop*.
3308 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3310 * configure.in: Check for setsid.
3312 1993-12-17 Richard Stallman (rms@srarc2)
3314 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3316 1993-12-15 Richard Stallman (rms@srarc2)
3318 * Makefile.in (mkdir): Make only the lockdir writable.
3320 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3322 1993-12-11 Richard Stallman (rms@srarc2)
3324 * Makefile.in (libdir): Use @libdir@.
3326 1993-12-08 Richard Stallman (rms@srarc2)
3328 * Makefile.in (install): Add empty command.
3330 1993-12-04 Richard Stallman (rms@srarc2)
3332 * make-dist: Put man/getopt.c in the dist.
3334 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3336 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3338 1993-12-03 Richard Stallman (rms@srarc2)
3340 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3341 Set it for all solaris versions.
3342 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3343 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3344 Likewise for NON_GNU_CC and CC.
3346 1993-12-01 Richard Stallman (rms@srarc2)
3348 * configure.in (mips-mips-riscos4*): Assign variable CC.
3349 (checking ${with_gcc}): If "no", don't override CC if already set.
3350 (CC): Initialize it as empty.
3352 1993-11-30 Richard Stallman (rms@srarc2)
3354 * configure.in (Suns): Set CPP if *-solaris2.3*.
3356 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3358 * Version 19.22 released.
3360 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3362 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3364 * make-dist: When breaking links, use cp -p.
3365 Copy install.sh into distribution.
3366 Move the temp dir up into the parent dir;
3367 don't leave the staging dir make-dist.tmp... in existence.
3368 * install.sh: New file.
3370 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3372 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3374 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3376 * configure.in (version): When --run-in-place, exclude
3377 ${datadir}/emacs/site-lisp from locallisppath.
3379 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3381 * configure.in: Delete jumk.c before writing it.
3383 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3385 * Version 19.21 released.
3387 * Makefile.in (mkdir): Ignore error from chmod.
3389 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3391 * make-dist: Don't put lisp/forms.README in the distribution.
3393 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3395 * configure.in (creating src/Makefile): Before running cpp,
3396 discard all lines that start with `# Generated' or /**/#.
3398 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3400 * Version 19.20 released.
3402 * make-dist: Use build-ins.in, not build-install.in.
3403 Don't bother updating TAGS since it's not included.
3405 * build-ins.in: Renamed from build-install.in.
3407 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3409 * make-dist: Don't try to link *.texinfo--there are none now.
3410 When running make in lib-src, specify YACC var value.
3412 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3414 * configure.in (extrasub): Add vpath patterns for %.[yls].
3416 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3417 Instead just include the commands to make src/Makefile as the
3418 second arg to AC_OUTPUT.
3420 * configure.in: Use : instead of dnl for comment inside
3423 * configure.in: No longer use vpath_sed. Instead, when we notice
3424 srcdir already configured, set extrasub to hack vpath in the
3427 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3429 * Makefile.in (VPATH): Define to @srcdir@.
3431 1993-09-28 Brian Fox (bfox@cubit)
3433 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3434 doesn't exist. Just copy src/Makefile.in instead. Touch
3435 all of the Makefiles after editing config.status.
3437 * INSTALL: Update documentation to match new configuration
3440 1993-09-27 Brian Fox (bfox@ai.mit.edu)
3442 * configure.in: Allow any of the path or directory Makefile
3443 variables to be set with flags to configure. Create all Makefiles
3444 at configure time. Edit special commands into config.status after
3445 src/Makefile.in is built from src/Makefile.
3447 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3448 If these files are out of date, simply have config.status
3449 rebuild them; don't rebuild them explicitly.
3451 1993-09-25 Brian Fox (bfox@ai.mit.edu)
3453 * build-install.in: Change src/xemacs to src/emacs. We no longer
3454 create src/xemacs, so the file wouldn't be found.
3456 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3458 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3460 * configure.in: Avoid forcing the search of /usr/include before
3461 fixed include files by resetting C_SWITCH_X_SITE if it is
3464 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3466 * Makefile.in (@rip_paths@locallisppath):
3467 Delete ${datadir}/emacs/site-lisp.
3469 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3472 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3473 Remove ${extra_output} from AC_OUTPUT call.
3475 1993-09-17 Brian Fox (bfox@inferno)
3477 * make-dist: Quote backquotes found in strings to be echoed.
3479 * configure.in: Use "sh -c pwd" when we want to avoid having the
3480 shell fix up the value of $PWD.
3482 1993-09-13 Brian Fox (bfox@inferno)
3484 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3485 of the installation fail. Suggested by Karl Berry.
3487 1993-08-30 Brian Fox (bfox@inferno)
3489 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3490 was used. Set MAKEFLAGS from MFLAGS.
3492 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3494 * configure.in: Test for res_init in libc.
3496 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3498 * configure.in: In the file ${tempcname}, use configure___
3499 instead of @configure@.
3501 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3503 * make-dist: Dist vpath.sed
3505 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3506 Depend on vpath.sed.
3507 Replace sed comand for VPATH with @vpath_sed@.
3509 * configure.in: Substitute variable `vpath_sed'.
3510 If not in $srcdir and $srcdir is configured,
3511 issue warning that GNU make is required,
3512 and set vpath_sed to use vpath.sed script.
3514 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3516 * configure.in: Remove check for $srcdir being configured. This
3517 pretty much works now.
3518 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3519 Check for XFree86 (/usr/X386/include) independent of whether
3522 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3523 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3526 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3528 * Version 19.19 released.
3530 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3532 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3534 * configure.in: Check for XScreenNumberOfScreen.
3536 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3538 * configure.in: Add * to end of all configuration alternatives.
3539 (m68*-sony-newsos3*): New alternative.
3541 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3543 * make-dist: Include getdate.c in distribution.
3545 * configure.in: For --help, use $PAGER if it is set.
3546 (LIB_X11_LIB): Default to -lX11.
3547 (mips-sgi-irix5.*): New alternative.
3549 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3551 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3552 Recognize *.B8.* as hpux version 8.
3553 (m68*-tektronix-bsd*): Fix typo in tek4300.
3554 (AC_HAVE_FUNCS): Add ftime.
3556 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3558 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3559 Use tekxd88, not tekXD88.
3561 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3563 * configure.in: Check for -lm. Then can check for frexp and logb.
3565 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3567 * Version 19.18 released.
3569 * make-dist (src): Don't put gnu-hp300 in dist.
3570 (src, lisp): Include OChangeLog in dist.
3572 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3574 * configure.in: Test for presence of logb and frexp functions.
3576 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3578 * configure.in (machine): Add i370-ibm-aix*.
3580 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3582 * configure.in (function checks): Test for mkdir and rmdir.
3584 * configure.in (function checks): Don't test for random and bcopy
3585 only when we're building with X; look for them all the time.
3587 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3589 * configure.in: Test for availability of bcopy functions, searching
3590 the X libraries if we're using X.
3592 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3593 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3594 versions of AIX, and needs to be passed to the loader.
3596 * configure.in: Test for the availablility of the
3597 XScreenResourceString function.
3599 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3601 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3602 LD_SWITCH_X_SITE and assume --with-x11.
3603 Only look for X11 files if we weren't told about a window system
3604 or if we were told to use X11 but not told where.
3605 Search the libraries from the s and/or m files when checking for
3608 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3610 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3612 * make-dist: Include lisp/dired.todo in the distribution.
3614 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3616 * configure.in: Add code to set HAVE_INET_SOCKETS.
3618 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3620 * configure.in: If we do find x_includes and x_libraries
3621 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3623 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3625 * make-dist: Include src/gnu-hp300 in the dist.
3627 * configure.in (canonical): New variable holds the canonicalized
3628 configuration. Don't alter `configuration'. Use `configuration'
3629 for Makefile.in for file naming.
3630 (testing x_includes and x_libraries): Use =, not ==.
3632 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3634 * Version 19.17 released.
3636 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3637 directory's makefile. This allows the invocation of CPP which
3638 builds xmakefile to receive these switches. The SunSoft C
3639 preprocessor inserts spaces between tokens if it doesn't get the
3640 -Xs flag requested in src/s/sol2.h.
3642 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3644 * configure.in (m68k-bull-sysv3): new config.
3646 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3648 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3649 the X Windows libraries.
3651 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3653 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3654 the distribution. Those files aren't kept in their own
3655 subdirectory any more.
3657 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3659 * Version 19.16 released.
3661 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3663 * configure.in: Add --verbose flag.
3665 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3667 * version 19.15 released.
3669 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3671 * Makefile.in (top_distclean): Use -f switch when cleaning out
3672 lock dir; it might be empty.
3674 * configure.in: Only check for -lXbsd once.
3676 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3678 * Version 19.14 released.
3680 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3682 * make-dist: If using gzip, create distribution with '.gz' extension.
3684 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3685 (lisp/forms-mode): This doesn't exist anymore.
3687 * configure.in: Look for the closedir function.
3689 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3691 * configure.in (CPP): Autoconf sets this to a shell variable
3692 reference, which doesn't work when it's edited into a makefile.
3693 Expand that variable reference.
3695 * Makefile.in (CPP): New variable.
3696 (src/Makefile): Edit CPP into src/Makefile.
3698 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3699 and entering double quotes to get the values of LD_SWITCH_X_SITE
3700 and the other make variables; make substitutes them in anyway.
3702 * Makefile.in (uninstall): Don't remove the lisp and etc
3703 directories if they're in the source tree.
3705 Bring mumbleclean targets into conformance with GNU coding standards.
3706 * Makefile.in (mostlyclean, clean): Separate these two; just have
3707 them pass the request to the subdirectory makefiles.
3708 (distclean): Pass the request down, and then get rid of the
3709 files configure built, and get rid of the Makefiles.
3710 (realclean): Pass the request down, and then do the same things
3712 (uninstall, info, dvi): New targets.
3714 * configure.in: Move clause for PC-compatible i386 box to the end
3715 of the case statement, to avoid masking configurations below.
3717 * configure.in: Add case for m88k-motorola-sysv4.
3719 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3720 the HP 68000 machines.
3722 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3723 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3724 preprocessor won't fiddle with them.
3726 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3728 * Makefile.in (TAGS): cd to src to run etags.
3730 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3732 * configure.in (version): Check the X libraries for XrmSetDatabase
3733 and random, and see if we have -lXbsd.
3735 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3737 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3738 s/*.h and m/*.h files. Martin Tomes
3739 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3741 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3743 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3744 above the general i386 alternative.
3746 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3748 * configure.in: Recognize configuration name for Data General
3751 * configure.in: Use AC_LONG_FILE_NAMES.
3753 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3755 * configure.in: Test for bison.
3756 * Makefile.in (YACC): New variable.
3757 (lib-src/Makefile.in): Edit YACC into the makefile.
3759 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3761 * Version 19.13 released.
3763 * configure.in (CFLAGS): Don't set this according to the value of
3764 the GCC shell variable. Instead, consult the machine and system
3765 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3766 test __GNUC__ while we're at it.
3768 * configure.in: Remove extra ;; from hpux cases.
3770 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3772 * configure.in: Check to see if the system has -ldnet.
3774 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3776 * make-dist: Add clauses to distribute lisp/forms-mode.
3778 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3780 * configure.in (machine): Fix the versions in hpux version number test.
3781 Do not guess based on cpu type. Do check for explicit system version.
3783 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3785 * configure.in: Do NOT look for `unknown' as company name.
3787 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3789 * configure.in: Fix typo in message.
3791 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3793 * Version 19.12 released.
3795 * Makefile.in (do-install): Correct previous etc-copying change.
3796 Partially rewrite using `if'.
3797 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3799 * Version 19.11 released.
3801 * configure.in: Handle 386bsd.
3803 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3805 * make-dist: Update getdate.c.
3807 * configure.in: Handle bsd386.
3809 * Makefile.in (do-install): Use `-' in tar options.
3811 * configure.in: Change ! "${...}" to x"${...}" = x.
3813 * Makefile.in (do-install): Copy the DOC-* files from the build
3814 etc directory, as well as lots of things from ${srcdir}/etc.
3816 * make-dist: Copy config.guess.
3818 * configure.in: Handle AIX versions 1.2, 1.3.
3820 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3822 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3823 the configuration name mips-mips-usg* to represent USG systems.
3825 * configure.in: Fix logic to detect if srcdir is already configured.
3827 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3829 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3830 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3831 of a directory; cd might fail, and have pwd print out the current
3834 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3836 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3838 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3840 * configure.in: Complain if srcdir points at an already-configured
3843 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3845 * Version 19.10 released.
3847 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3849 * Makefile.in: Use Makefile comments, not C comments.
3851 * configure.in: Add case for the Tektronix XD88.
3853 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3855 * configure.in: Handle sysv4.2 and sysvr4.2.
3857 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3859 * configure.in: Traverse the argument list without destroying it;
3860 don't use shift. It turns out that "set - ${saved_arguments}"
3861 doesn't work portably.
3863 * configure.in: Add missing "fi".
3865 * make-dist: Rebuild configure if configure.in is newer.
3867 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3868 targets to be executed even if make remembers that it has already
3871 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3873 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3875 * configure.in (romp): Handle various version numbers with aos and bsd.
3877 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3879 * configure.in: Fix message text.
3881 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3883 * make-dist: Make a `site-lisp' directory in the distribution,
3884 instead of a `local-lisp' directory, which hasn't been the
3885 appropriate name for a long time.
3886 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3887 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3889 * Makefile.in (do-install): Correctly detect if ./etc and
3890 ${srcdir}/etc are the same.
3892 * configure.in: Extract UNEXEC from the system configuration
3893 files, compute the name of the source file corresponding to the
3894 object file, and #define it as UNEXEC_SRC in config.h.
3896 * configure.in: If srcdir is '.', then try using PWD to make it
3899 * configure.in: Include ${srcdir} in the printed report, to help
3900 people notice if it's an automounter path.
3902 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3904 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3906 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3908 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3909 when they are different. Add `shift' command.
3910 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3911 (externallispdir): Var deleted.
3913 * configure.in: Delete spurious paren outputting short_usage.
3915 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3917 * Version 19.9 released.
3919 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3921 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3924 * make-dist: Check for .elc files with no corresponding .el file.
3926 * Makefile.in (mkdir): Make all the directories in locallisppath.
3928 * config.guess: New file.
3929 * configure.in: Use it, tentatively.
3930 * INSTNALL: Mention its usage.
3932 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3933 the former gives you the operating system rev directly. Use
3934 s/hpux.h if we don't recognize what we got.
3936 * Makefile.in (do-install): Don't remove a destination directory
3937 if it's the same as the source. If ${srcdir}/info == ${infodir},
3938 don't try to copy the info files.
3940 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3941 doesn't work if you're not using a separate source directory.
3942 (do-install): Copy the build tree's etc directory only after
3943 making sure it's not also the source tree's etc directory.
3945 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3947 * configure.in: Handle sunos4.1.3 specially.
3949 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3951 * Makefile.in (INSTALL): Add definition.
3953 * configure.in: Fix some messages. Support -with-gnu-cc.
3954 At the end, use `set --', not `set -'.
3955 Delete spurious `.h' in hpux alternatives.
3957 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3959 * Version 19.8 released.
3961 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3963 * configure.in: When looking for source in the same directory as
3964 the configure script, make the path thus discovered absolute.
3965 If the user specifies the `--srcdir' switch, make that directory
3968 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3970 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3971 too, as the value of the PATH_INFO macro.
3973 * configure.in: Check to see if the source lives in the same
3974 directory as the configure script.
3976 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3978 * Makefile.in (install): Split this into `install' and
3979 `do-install', to give people more control over exactly what gets
3981 (do-install): New target, containing the guts of `install'. Don't
3982 remove and recreate the directories inside the copying loop - do
3983 it all before the copying loop. Pass more flags to the lib-src
3985 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3986 avoid errors and warnings.
3988 * configure.in: For generic IBM PC boxes, insist on "unknown" for
3989 the manufacturer - the more general case was blocking other i386
3990 configuration names below, and that's how the names are written in
3993 * make-dist: When breaking links, remove the link before moving
3994 the copy onto it, to avoid interactive behavior.
3996 * Makefile.in: Doc fix.
3998 * configure.in: Doc fix.
4000 * INSTALL: Mention --exec-prefix option.
4002 * configure.in: Add support for the `--exec-prefix' option.
4003 * Makefile.in: Accept that support.
4005 * configure.in: Use the AC_PROG_INSTALL macro.
4006 * Makefile.in (INSTALL): Variable removed.
4007 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
4009 * configure.in: Distinguish between hp800's and hp700's by calling
4012 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4014 * configure.in: Recognize configuration names for i860 boxes
4017 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4019 * configure.in: Distinguish between hp800's and hp700's by the
4020 version of HP/UX they run, since that's something people are more
4021 likely to know - hp700's run 8.0.
4022 Add HP 700 configuration.
4024 * configure.in: Test for the presence of the `rename' function.
4026 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
4028 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
4030 * make-dist: Break intra-tree links.
4032 * configure.in: Explain that this is an autoconf script, and give
4033 instructions for rebuilding configure from it. Arrange to put
4034 comments in configure explaining this too.
4036 * configure.in: Make the first line of the configure script be
4037 "#!/bin/sh". Leaving the first line blank didn't work.
4039 * configure.in (long_usage): Removed; made short_usage describe
4040 the options briefly.
4042 * configure.in: Implement the --prefix option.
4043 * Makefile.in (prefix): Add support for it here.
4044 * INSTALL: Document it here.
4046 * Makefile.in (install): Don't assume that the files in the `info'
4047 subdirectory match *.info. They don't have that prefix.
4049 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4051 * configure.in: Add case for version 5 of Esix.
4053 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4055 * Version 19.7 released.
4057 * make-dist: There aren't any *.com files in lib-src anymore.
4059 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
4060 them; they're symlinks to other filesystems on the GNU machines.
4062 * make-dist: Check that the manual reflects the same version of
4063 Emacs as stated in lisp/version.el. Edit that version number into
4066 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4068 * configure.in: Remove the hack of AC_DEFINE; use
4071 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4073 * make-dist: Don't distribute precomp.com, compile.com, or
4074 link.com from ./src; they're in ./vms now.
4076 Some time-handling patches from Paul Eggert:
4077 * configure.in: Add AC_TIMEZONE.
4079 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4081 * configure.in: Recognize Linux as a valid operating system for
4084 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4086 * make-dist: Distribute some VMS files we got from Richard Levitte.
4088 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
4089 the source for the sed command, not oldXMenu/Makefile.
4091 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4093 * INSTALL: Don't claim the srcdir option doesn't work.
4095 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4097 * configure.in: Include remarks saying what order the autoconf
4098 tests should go in, and remind people to change config.h.in
4099 whenever they add autoconf tests which make #definitions.
4101 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
4103 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4105 * Makefile.in (oldXMenu/Makefile): Make this depend on
4106 ${srcdir}/oldXMenu/Makefile.in, not itself.
4108 * PROBLEMS: Some updates from David J. Mackenzie.
4110 More changes from David J. Mackenzie.
4111 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
4112 removed; autoconf and config.h should specify all these
4114 (buildlisppath): Make this path depend on ${srcdir}.
4115 (INSTALLFLAGS): Removed.
4116 (INSTALL): Include the -c flag.
4117 (install): Change the way we invoke install accordingly.
4119 Install ${srcdir} changes from DJM.
4120 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
4122 (COPYDIR, COPYDESTS): Install files from both the etc directory in
4123 the source tree and the etc directory in the object tree.
4124 (${SUBDIR}): Pass the prefix variable down to submakes.
4125 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
4127 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
4128 values for srcdir and VPATH.
4129 (install): Add `v' flag to tar command. Make sure that `dir'
4130 exists in ${srcdir}/info before copying it. Remember that the man
4131 pages come from the source tree, not the object tree.
4132 * configure.in: Remove remarks saying that the --srcdir option
4134 Create the etc directory in the object tree.
4135 Recognize configuration names of the form *-sun-solaris*.
4136 Recognize sunos5 and solaris as operating system names.
4138 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
4139 lib-src/getdate.y and src/systime.h.
4141 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4143 * make-dist: Make links in info subdir.
4145 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4147 * configure.in: Call AC_STDC_HEADERS.
4149 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4151 * configure.in: Sidestep autoconf's quoting of the second argument
4152 of AC_DEFINE, so we can specify the value to put there. It would
4153 be nice if autoconf provided some way to specify computed values
4156 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4158 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
4159 this is always just -DHAVE_CONFIG_H.
4161 The GNU coding standards specify that CFLAGS should be left for
4163 * Makefile.in (CFLAGS): Let configure determine the default value
4165 have it default to DEFS.
4166 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
4167 (lib-src/Makefile, src/Makefile): Edit the default value for
4168 CFLAGS into these files, not DEFS.
4169 * configure.in (CFLAGS): Choose a default value for this - "-g"
4170 normally, or "-g -O" if we're using GCC. Edit it into the
4173 * configure.in: When scanning the machine and system description
4174 #include files, write their names to conftest.c properly.
4176 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4178 * configure.in: In configuration name case for Apallos running
4179 Domainios, set opsys, not opsysfile.
4181 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
4182 src/config.h, instead of AC_OUTPUT; the latter overwrites
4183 src/config.h even when it hasn't changed, puts a makefile-style
4184 comment at the top even though it's C code, and produces a
4185 config.status script which doesn't do the job right.
4187 * configure.in: Add AC_LN_S test, so we can tell whether or not we
4188 can use a symbolic link to get the X Menu library into src.
4189 * Makefile.in (LN_S): New variable.
4190 (src/Makefile): Edit the value of LN_S into this makefile.
4192 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4194 * configure.in: Support *-sco3.2v4* as opsystem.
4196 * make-dist: Don't include calc directory.
4197 Exclude many files in the man directory; copy a few.
4199 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4201 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
4202 call AC_STRUCT_TM to see what's in time.h.
4204 * configure.in: Employ quoting stupidity to get the value of CPP
4207 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4209 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
4210 variable to scan the machine and system description files.
4212 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
4213 so that getdate.y builds correctly.
4215 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4217 * configure.in (tempcname): Change this to "conftest.c", so it will
4218 work properly on systems with short filenames; this is the name
4221 * configure.in: Also detect the availability of dup2 and
4224 * configure.in: Use the AC_ALLOCA test.
4225 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
4226 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
4228 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4230 * make-dist: Distribute configure, as well as configure.in.
4233 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4235 * Makefile.in (install): Print out the name of the directory we're
4236 copying, so people can have some idea of whether we're making
4239 * Makefile.in (install.aix, install.xenix, install.sysv, install):
4240 Don't forget to re-create the COPYDESTS directories after we clear
4243 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4245 * Makefile.in: Add autoconf cookies so that the configure
4246 script can comment out sections of path variable definitions to
4247 choose between the installable configuration and the run-in-place
4249 * configure.in: Add new option `--run-in-place', to select the
4250 run-in-place path definitions.
4252 * configure.in: Add a clause to the big configuration name case
4253 for the NeXT machine.
4255 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4257 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4258 Make sure that each source directory exists, and is different from
4259 the destination directory; then, delete the destination before
4260 copying over the source.
4262 * make-dist: Distribute configure.in, instead of configure.
4264 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4266 * configure.in: Don't set CC to "gcc -O" if the user specifies
4267 `--with-gcc'. Add -O to DEFS if GCC is set.
4269 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4271 * Makefile.in (clean mostlyclean): Missing right paren.
4273 * configure.in: When checking for X windows, search for an X11
4274 subdirectory of ${x_includes}.
4276 * configure.in: Check for gettimeofday function, for getdate.y.
4278 Change `configure' to a mixture of custom code and autoconf stuff.
4279 autoconf can't derive all the information we need, but we'd really
4280 like to be able to take advantage of some of its tests, and its
4281 file-editing facilities.
4282 * configure.in: Renamed from configure.
4283 Quote the sections of shell script we want copied literally to
4284 the configure script.
4285 (compile): Initialize this to make the autoconf macros' code happy.
4286 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4287 code to do their jobs.
4288 Use autoconf to produce Makefile and src/config.h.
4289 Remove the Makefile-style comment that autoconf places at the top
4291 (config_h_opts): Removed - no longer necessary.
4292 * Makefile.in (configname): Renamed to configuration.
4293 (CONFIG_CFLAGS): Renamed to DEFS.
4294 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4295 get values via autoload @cookies@.
4296 (libsrc_libs): Get this from autoconf. We used to do nothing
4298 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4300 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4301 echo the move-if-change command.
4303 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4305 * make-dist: Distribute lib-src/rcs-checkin.
4307 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4308 Don't try to make links to the RCS or Old subdirectories.
4309 Use the appropriate extension for the compression type in use.
4310 Create the tar file in the shell's initial default directory, not
4312 Erase the whole ${tempparent} tree, not just ${tempdir}.
4314 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4316 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4317 use to build paths.h.
4318 (lib-src/Makefile, src/Makefile): Similarly.
4320 * configure: Extend test for working `const' keyword to handle AIX
4323 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4325 * make-dist: Distribute lisp/term/ChangeLog.
4327 Arrange for C compilation throughout the tree to get
4328 C_SWITCH_SYSTEM from the configuration files.
4329 * configure: Extract C_SWITCH_SYSTEM from the machine and
4330 system-dependent files, and save it in the top-level Makefile.
4331 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4332 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4334 * make-dist: Include the VMS support files in oldXMenu in the
4337 * configure: Doc fix.
4339 * configure: Fix corrupted config_h_opts.
4341 * configure: Properly report option names in error messages.
4343 * configure: Properly recognize --x-includes and --x-libraries
4346 * configure: Fix syntax errors in code handling XFree386.
4348 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4350 * configure: Add special code to detect XFree386, and tell
4353 * configure: Properly handle extracting values of LIBS_MACHINE and
4354 LIBS_SYSTEM that contain spaces.
4356 * configure: Add `--x-includes' and `--x-libraries' options. I
4357 think these are dopey, but no less than three alpha testers, at
4358 large sites, have said they have their X files installed in odd
4359 places. Implement them by setting C_SWITCH_X_SITE and
4360 LD_SWITCH_X_SITE in src/config.h.
4362 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4364 * make-dist: Don't distribute etc/Old files.
4366 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4369 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4371 * make-dist: Fix typo.
4373 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4375 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4376 in some cases where it should but didn't seen to.
4378 * Makefile.in: Added unlock and relock productions.
4380 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4382 * make-dist: Add a --compress option to force make-dist to use
4385 * make-dist: Use gzip, if we can find it.
4387 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4388 make rs6000-ibm-aix default to -aix32.
4390 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4392 * Makefile.in: Added `Developer's configuration' section.
4394 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4396 * Makefile.in: Add commented-out variable settings for developer's
4399 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4401 * make-dist: Distribute `src/bitmaps' too.
4403 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4405 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4406 make rs6000-ibm-aix default to -aix32.
4408 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4410 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4412 * Makefile.in (install.sysv): Add a second `$' in front of
4413 `${dest}', so that the shell will expand it, instead of Make.
4415 * configure: When processing the name of the configure script,
4416 collapse `././' to `./', but leave a single `./' prefix alone.
4418 * configure: Doc fix.
4420 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4422 * configure: Handle isc3.0 correctly.
4424 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4426 * make-dist: Don't try to copy the COPYING notice into
4427 external-lisp; we're not distributing that directory any more.
4429 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4431 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4432 Remove CVS subdirectories from the installed directory trees, as
4433 well as RCS directories.
4435 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4437 * make-dist: Only copy gmalloc.c if we couldn't link it.
4438 Don't try to copy man/{README,Makefile} unless they actually exist.
4440 * Makefile.in (lisppath): Don't include externallispdir in this.
4441 We're not sure whether we're even going to distribute the
4444 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4446 * make-dist: Don't distribute the external-lisp directory anymore.
4447 * INSTALL: Remove all references to external-lisp.
4449 * configure: Detect whether the compiler supports `const'
4450 properly, and edit src/config.h accordingly.
4452 * configure: Tweak layout of final report.
4454 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4457 * Makefile.in (locallisppath): Make this default to
4458 ${datadir}/emacs/site-lisp, instead of
4459 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4460 the same thing, and local-lisp causes completion conflicts with
4462 (lisppath): Add ${externallispdir} to this.
4463 * INSTALL: Adjust installation directions.
4465 * Makefile.in (externallispdir): New variable, to say where to
4466 install the externally-maintained lisp files.
4467 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4469 * INSTALL: Describe external-lisp and the new externallispdir
4472 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4474 * configure (progname): New option `--with-gcc'. Make it clearer
4475 how we are trying to guess whether or not we have GCC.
4476 * INSTALL: Document the `--with-gcc' option, and improve
4477 description of `--with-x' options.
4479 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4481 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4482 ${infodir} from these variables; we have written out explicit code
4483 to install the info files.
4485 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4487 * make-dist: Don't distributed the RCS files in the etc directory.
4489 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4491 * Makefile.in: Some makes can't handle comments in the middle of
4492 commands; move them to before the whole rule.
4494 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4496 * README: Mention what Emacs is.
4498 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4500 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4501 Add `./cpp' and `./man' back into the distribution.
4503 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4505 * Makefile.in: Define MAKE, and use where appropriate.
4507 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4509 * make-dist: Remember that the authoritative COPYING notice is
4510 `etc/COPYING', not `../etc/COPYING'.
4512 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4514 * make-dist: Make sure that the COPYING notices in each directory
4515 are copies, not symlinks.
4517 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4519 * INSTALL: The build process produces an executable called `emacs'
4520 now. Change references.
4521 * Makefile.in: Adjust `install.mumble' targets to install
4522 `src/emacs', not `src/xemacs'.
4524 * configure: Start with a blank line; this keeps some old CSH's
4525 from thinking it's a CSH script. Most systems will just use
4526 /bin/sh to run it, which is what we're expecting; the only other
4527 shells which might try to interpret it themselves are probably
4530 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4532 * INSTALL: Improvements suggested by David Mackenzie.
4534 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4536 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4537 Don't try to copy the info files if there aren't any; the
4538 unexpanded globbing pattern disappoints `install'. Ignore the
4539 return status of that command.
4541 * INSTALL: Updated for new configuration arrangement.
4543 * configure: Don't make the top-level Makefile read-only - people
4544 may want to edit the values of the path variables.
4546 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4547 Install the info files in ${infodir}. Install the executable
4548 under both `emacs' and `emacs-VERSION'.
4550 * Makefile.in: Doc fix.
4552 * Makefile.in (exec_prefix): New variable, as per latest version
4553 of coding standards.
4554 (bindir, libdir): Use it, instead of `prefix'.
4555 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4557 * Makefile.in (mandir): Make the default value for this depend on
4560 * Makefile.in (datadir, statedir, libdir): Make these all default
4562 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4565 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4566 Install the etags and ctags man pages too.
4568 * Makefile.in (distclean): Don't delete backup files; that's the
4570 (extraclean): Like distclean, but deletes backup and autosave files.
4572 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4574 Make path specification conform to GNU coding standards.
4575 * configure (long_usage): Remove all traces of old arguments from
4576 usage messages, and document the options we do accept in more
4577 detail: -with-x... and --srcdir.
4578 (options, boolean_opts): Deleted; we don't have enough options to
4579 make this worthwhile.
4580 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4581 along with the code which supported them; these should be set as
4582 arguments to the top-level make.
4583 (config_h_opts): Since this no longer doubles as a list of option
4584 names, make them upper case; this simplifies the code which uses
4585 them to build the sed command to edit src/config.h. Change the
4586 code which sets them.
4587 (cc, g, O): Don't allow the user to set these using options; they
4588 should be specified using `CC=' and `CFLAGS=' arguments to the
4589 top-level make. Just choose reasonable default values for them,
4590 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4592 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4593 options; use them whenever the configuration files say they're
4595 Simplify the argument processing loop. Don't accept abbreviations
4596 for option names; these might conflict with other configuration
4597 options in the future.
4598 Add some support for the `--srcdir' option. Check for the sources
4599 in . and .. if `--srcdir' is omitted. If the directories we will
4600 compile in don't exist yet, create them under the current directory.
4601 Note that the rest of the build process doesn't really support
4603 Edit only the top Makefile. That should edit the others. Edit
4604 into the makefile: `version', from lisp/version.el, `configname'
4605 and `srcdir' from the configuration arguments, `CC' and
4606 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4607 the user's path, and LOADLIBES as gleaned from the system
4609 Simplify the report generated; it doesn't need to include any
4610 description of paths now.
4611 Make `config.status' exec configure instead of just calling it, so
4612 there's no harm in overwriting `config.status'.
4613 * Makefile.in (version, configname): New variables, used to choose
4614 the default values for datadir and libdir.
4615 Path variables rearranged into two clearer groups:
4616 - In the first group are the variables specified by the GNU coding
4617 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4618 manext, infodir, and srcdir).
4619 - In the second are the variables actually used for Emacs's paths
4620 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4621 archlibdir), which depend on the first category.
4622 datadir and libdir default to directories under
4623 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4625 etcdir and lispdir default to subdirectories of datadir.
4626 archlibdir defaults to libdir.
4627 The new installation tree is a bit deeper than it used to be, so
4628 use the new make-path program in lib-src to build them all.
4629 Always build a new src/paths.h.tmp and then move-if-change it to
4630 src/paths.h, to avoid unnecessary rebuilds while responding to the
4632 Remove all mention of arch-lib. Run utility commands from
4633 lib-src, and let the executables be copied into archlibdir when
4635 Add targets for src/Makefile, lib-src/Makefile, and
4636 oldXMenu/Makefile, editing the values of the path variables into
4638 Let lib-src do its own installation.
4639 (datadir): Default to putting data files under
4640 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4641 (emacsdir): Variable deleted; it would only be confusing to use.
4642 (lispdir, etcdir): Default to ${datadir}/lisp.
4643 (mkdir): Use make-path for this.
4644 (lockdir): Do this in mkdir.
4645 (Makefile): New target.
4647 * configure (usage_message): Rename to long_usage.
4649 * make-dist: Don't bother creating an arch-lib directory; that's
4650 only for installation now.
4652 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4654 * configure: Use GCC-style configuration names, using config.sub.
4655 Change the usage and help messages.
4657 * configure: Initialize window_system, not indow_system.
4659 * configure: Report which window system, compiler, and signal
4660 handler return type we decide to use.
4662 * make-dist: Explain what's going on if config.sub and gmalloc.c
4663 can't be linked. Place the code which copies them near the code
4664 which links the rest of the files around them.
4666 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4668 * make-dist: Don't bother to distribute src/*.com, or
4669 src/vmsbuild; those have all been moved to `../vms'.
4671 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4673 * make-dist: Don't forget that the way to avoid filenames starting
4674 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4675 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4676 couldn't make hard links to, since we have two already, and
4677 perhaps more to come.
4679 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4681 * configure: When editing parameters into lib-src/Makefile, change
4682 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4683 needs some other flags too.
4685 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4687 * configure: Remove spurious echo of the configuration name.
4689 * make-dist: Don't distribute files in src/m and src/s whose names
4692 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4694 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4695 Also LISP_FLOAT_TYPE.
4697 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4699 * make-dist: Copy config.sub, since it's a symbolic link to a file
4700 on another file system.
4702 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4704 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4707 * config.sub: New file, to help us recognize configuration names.
4708 * make-dist: Include it in the distribution.
4710 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4712 * configure: Convert `-' to `_' in specified option names.
4713 Accept options with --. Delete --highpri and --have-x-menu options.
4714 New options --with-x and --with-x10 replace -window-system.
4715 Don't mention options --gnu-malloc, --rel-alloc
4716 or --lisp-float-type in help message.
4718 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4720 * make-dist: Include the `vms' subdirectory in the distribution.
4722 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4724 * configure: Remove lines starting with "# DIST: " when building
4725 lib-src/Makefile and src/Makefile. This allows us to mark the
4726 "Makefile.in" files with explanatory comments which won't also get
4727 stuck in the Makefiles.
4729 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4731 * make-dist: Don't use the '+' operator in the sed regular
4732 expression that extracts the version number from lisp/version.el;
4733 Ultrix sed doesn't seem support the operator. Just double the
4736 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4738 * Makefile.in: Doc fix.
4740 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4742 * configure: Rewrite sed command to remove at most one ./ prefix;
4743 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4746 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4748 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4750 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4752 * make-dist: Go ahead and build a new TAGS file, unless the
4753 --newer option was specified. Don't try to delete a TAGS file
4754 from etc; it's not kept there, and shouldn't be deleted anyway.
4756 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4758 * make-dist: If the lisp directory contains a default.el, don't
4761 * configure: When searching signal.h for the type of a signal
4762 return handler, make a copy of it, not a symbolic link to it; that
4763 way, it will work on systems that don't have symbolic links.
4765 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4767 * make-dist: taught it about vcdiff and rcs2log, added --newer
4768 option for generating incremental distributions. Stopped it from
4769 generating a TAGS file into the distribution; that sucker is
4770 *big*, and easily enough generated with the toplevel makefile.
4772 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4774 * configure: When writing config.status, don't prefix progname
4775 with a '.'; it might be absolute.
4777 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4779 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4780 /usr/include/X11 exist, not only if both exist.
4782 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4784 * make-dist: Make the new external-lisp directory a duplicate of
4785 the external-lisp directory, not the lisp directory.
4787 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4789 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4790 clean' in arch-lib; it doesn't even have a Makefile.
4792 * Makefile.in (clean, mostlyclean): In the test which tries to
4793 distinguish between the build directory, which should be cleaned,
4794 and the installed directory, which shouldn't, cd to `${emacsdir}',
4795 not `${DESTDIR}${LIBDIR}'.
4797 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4799 * make-dist: Be sure to delete the .c and .h files that YACC and
4800 BISON create from getdate.y.
4802 * external-lisp: New directory; see `external-lisp/README'.
4803 * make-dist: Added support for the external-lisp subdirectory.
4805 * make-dist: Changed message which complains that make-dist wasn't
4806 invoked in the right directory to indicate which files it was
4809 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4811 * configure: Add comments explaining why we can't translate
4812 character ranges or control characters in `tr'.
4814 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4816 * configure: When generating the configuration message, we used to
4817 build the message from the start so that each line began with "# "
4818 so that it would be a comment in `config.status'. However, this
4819 causes trouble if any of the variables we use in the message
4820 expand to more than one line of text - as gnu_malloc_reason
4821 sometimes does. So instead, we build the message as it should be
4822 printed to the user (i.e. without the "# " prefixes), and stick on
4823 the "# "s when we write it to `config.status'.
4825 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4826 `lib-src' and `arch-lib'.
4828 * configure: When generating report and `config.status' file, note
4829 that bindir only determines where `make install' and
4830 `build-install' will place the executables; this should make it
4831 clear that the ordinary build process will not try to install
4834 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4836 * make-dist: Change messages to say that we are 'making links to
4837 X', rather than 'copying X'. And put `' quotes around file names.
4839 * make-dist: Include '.tmp' in the name of the staging directory.
4841 * make-dist: Pass the `-f' option to rm when you're not sure that
4842 the files you're removing actually exist.
4844 * make-dist: When setting up etc/COPYING, always nuke whatever is
4845 there, and then copy it in, to make sure we get a real file.
4847 * make-dist: Don't try to distribute *.defns files any more. The
4848 only such file was for simula.el, which has been superceded by a
4849 version which doesn't have a separate .defns file.
4851 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4853 * make-dist: Don't distribute configured versions of config.h.in,
4854 paths.h.in, Makefile.in in src.
4856 * configure: Delete .tmp files before creating them; don't bother
4857 trying to make final targets writeable first, since it won't
4858 matter to move-if-change.
4860 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4862 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4863 mkdir and chmod in the center of all the conditionals. GNU Make
4864 will strip these out, but other makes won't.
4866 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4868 * make-dist: Include move-if-change in list of files to distribute.
4870 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4872 * configure: Remove any "." elements from the program name.
4874 * configure: Don't record the values of all the possible arguments
4875 in config.status; only record the options that the user specified.
4877 * configure: Use move-if-change to move in the new src/config.h.
4879 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4881 * move-if-change: New file, copied from gcc release.
4882 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4883 a temp file, so we don't update paths.h if an error occurs or if
4884 it doesn't need changing.
4886 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4888 * Makefile.in (src/paths.h): Do not install a value for the
4889 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4890 * build-install.in: Same thing.
4892 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4894 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4895 latter, being a typo, is always false, resulting in a program
4896 whose default behaviour is to painstakingly build a copy of the
4897 source tree, and then delete it. Rah.
4899 * Makefile.in: Add dist target, and comment for it.
4901 * configure: When scanning <signal.h> for a declaration for
4902 signal, create a symbolic link with a name ending in .c, so the
4903 compiler won't complain that it's only been given .h files.
4905 * configure: Check whether there are any arguments available
4906 before shifting to get the value of a non-boolean parameter.
4908 * make-dist: Doc fix.
4910 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4912 * configure: Instead of grepping /usr/include/signal.h for a
4913 signal declaration, run /usr/include/signal.h or
4914 /usr/include/sys/signal.h through cpp and grep for the
4917 * configure: Redirect the output of grep to /dev/null instead of
4918 using grep -s - that flag means different things on other systems.
4920 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4921 since the former is recognizable even if you don't know what
4923 * configure: Accomodate that change.
4925 * configure: Accept options for all of the directories you can
4926 change in the Makefile.
4928 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4930 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4931 FOO before you can use them.
4933 * build-install.in: Made the "Where To Install Things" section
4934 conform with the similar section from Makefile.in. Copied section
4935 which builds src/paths.h from src/paths.h.in from the Makefile.
4937 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4939 * configure: Write config.status to pass its command-line
4940 arguments on to configure, so that people can use it to recreate
4941 an old configuration, with minor changes.
4943 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4945 * configure: Don't rely on option variables being unset if their
4946 values are the empty string. In particular, when producing the
4947 English report, don't assume that highpri will be unset when no
4948 increased priority has been requested; -highpri='' should be the
4949 same as omitting -highpri altogether.
4951 * configure: Fix dumb bug: when running the system and machine
4952 description files through cpp, mark those lines that we want to
4953 evaluate with the string '@configure@', and then only evaluate
4954 them. This way if the files include anything that actually
4955 generates text (type definitions or external declarations, say),
4956 we won't try to eval it.
4958 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4960 * make-dist: New shell script.
4962 * configure: When creating foo from foo.in, make foo read-only to
4963 remind people to edit the .in file instead.
4965 * INSTALL: Changed references to config.h-dist to config.h.in.
4966 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4967 to build src/paths.h from src/paths.h.in; added a paragraph to do
4969 * configure, Makefile, build-install: Changed filenames like
4972 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4974 * Makefile, build-install: Renamed to Makefile.in and
4975 build-install.in; the configure script will edit these to produce
4976 the usable Makefile and build-install.
4977 * configure: Changed to produce ./Makefile, ./build-install,
4978 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4979 instead of editing them in place.
4981 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4983 * Makefile: Re-arranged so that the undumped Emacs will search
4984 ../lisp *after* the site's local elisp files.
4985 (locallisppath, dumplisppath): New variables.
4986 (lisppath): This variable's default value is now chosen based on
4987 $(locallisppath) and $(lispdir); while it used to be the
4988 customization point for adding site-local elisp directories to
4989 load-path, that job is now handled mostly by locallisppath.
4990 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4991 Check the values being assigned to the *LOADSEARCH macros for null
4992 path elements (like '::' in 'foo::bar').
4994 * configure: When checking if the machine- and system-dependent
4995 files define a particular macro or not, actually run them through
4996 CPP and test the macros with #ifs, instead of just grepping for
4997 the macros' names. In particular, check for SYSTEM_MALLOC in this
5000 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
5002 * Makefile (install): Don't use -s in install. (Keep the symbols.)
5004 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5006 * configure: Make the config.status file an executable shell
5007 script which will recreate the same configuration. Include the
5008 verbal description of the current configuration as a comment in
5012 * Makefile: brought the Makefile up to the GNU coding
5013 standards, as described in standards.text:
5014 (TAGS): New name for the target which rebuilds the tags table.
5015 (check): New target; doesn't do anything yet.
5016 (mostlyclean): New target, synonymous with clean.
5017 (realclean): New target. Currently, this just calls the
5018 subdirectories's makefiles and then deletes config.status.
5019 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
5021 Installation directory variables changed to conform.
5022 (install, install.sysv, install.xenix, install.aix): Changed the
5023 code which copies the directories into their installed location to
5024 allow the installed locations to be in several different
5025 directories; the old version assumed that they would all be in
5027 (mkdir, lockdir): Allow the installed locations to be in several
5028 different directories.
5031 * build-install: Use the same variable names as the Makefile.
5032 Allow the installed locations to be in several different
5035 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5037 * Makefile (src/paths.h): Instead of using a single sed command to
5038 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
5039 separately, and don't forget to append "/!!!SuperLock!!!" to the
5040 value of the PATH_SUPERLOCK macro.
5042 * config.emacs: Renamed to configure, for consistency with other
5043 GNU products. Internal references changed.
5044 INSTALL, Makefile: References changed.
5046 * lock: New directory, which should always be empty. If this
5047 directory doesn't exist, Emacs won't complain; it just won't lock.
5048 Having this here means that people can just unpack Emacs, build
5049 it, and have locking work.
5051 * share-lib: Re-renamed to etc, for the sake of tradition.
5052 * config.emacs: Changed default value for datadir to ../etc.
5053 * INSTALL, README: Adjusted.
5055 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5057 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
5058 by running CPP on the appropriate s/*.h and m/*.h files.
5060 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5062 * config.emacs: Make sure to set the "exit on error" flag once
5063 we've removed config.status; errors should abort the configuration.
5065 1992-02-15 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5067 * config.emacs: Added -distribute option, so that the Makefile
5068 paths are in their proper form. I don't know why this matters.
5070 1992-02-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5072 * local-lisp: New directory, empty in the distribution, for people
5073 to put local elisp code in.
5074 * config.emacs: Include it in the default load path.
5075 * README: Document it.
5077 1992-01-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5079 * config.emacs: Guess the type of signal handling functions based
5080 on the contents of /usr/include/signal.h.
5082 * config.emacs: Print out progress report messages.
5084 * Makefile (src/paths.h): Don't generically replace
5085 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
5086 editing of the other entries, and each entry should be dealt with
5089 * build-install: Converted from C-shell to Bourne shell.
5090 * config.emacs: Edit build-install properly.
5092 * config.emacs: Doc fix.
5094 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
5096 * Makefile (install): Remove `B' from tar xf command.
5098 1992-01-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
5100 * config.emacs: Removed support for the `maintain-environment'
5101 option; the only important difference between this and its absence
5103 * INSTALL: Removed mention of `maintain-environment'.
5105 * config.emacs: Fix arguments to sed when processing boolean
5108 1991-12-05 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
5110 * config.emacs: New file, to help automate the installation
5113 * Makefile: Lots of changes to support the separation of etc into
5114 architecture-dependent and -independent files:
5115 (EMACSROOT): New variable, giving the directory under which all of
5116 Emacs's libraries should be installed. Changed rest of file to
5118 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
5119 (DATADIR): New variable, denoting architecture-independent dir.
5120 (LOCKDIR): New variable, for completeness.
5121 (SUBDIR): No more etc, new lib-src.
5122 (COPYDIR): No more etc, new arch-lib and share-lib.
5123 (src/paths.h): Set PATH_DATA and the LOCK macros too.
5124 (src): Now depends on lib-src, not etc.
5125 * build-install: Changes parallel to the above.
5126 * README: Describe the new arrangement.
5128 * vms: New subdirectory for all the VMS stuff.
5130 1991-12-03 Jim Blandy (jimb@pogo.gnu.ai.mit.edu)
5132 * Makefile (LISPPATH): New variable.
5133 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
5135 1990-09-28 Richard Stallman (rms@mole.ai.mit.edu)
5137 * Makefile (install, install.sysv, install.xenix):
5138 Install wakeup instead of loadst. No need for setuid or setgid.
5140 1990-08-07 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5142 * Makefile (clean): Clean etc if that's not the installation dir.
5144 1990-04-26 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5146 * Makefile (paths.h): Make sed alter each name in the path.
5148 1988-08-30 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5150 * Makefile (install.sysv): Use cpio, not tar.
5152 1988-08-03 Richard Stallman (rms@sugar-bombs.ai.mit.edu)
5154 * Makefile (lockdir): Rename `lock' target.
5155 Depend on it from install*, not from `all'.
5157 1988-05-16 Richard Stallman (rms@frosted-flakes.ai.mit.edu)
5159 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
5160 to match build-install and paths.h.
5163 ;; coding: iso-2022-7bit-unix
5166 Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001
5167 Free Software Foundation, Inc.
5168 Copying and distribution of this file, with or without modification,
5169 are permitted provided the copyright notice and this notice are preserved.