Makefile.in

   1 ### @configure_input@
   2
   3 # Copyright (C) 1992-2013 Free Software Foundation, Inc.
   4
   5 # This file is part of GNU Emacs.
   6
   7 # GNU Emacs is free software: you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation, either version 3 of the License, or
  10 # (at your option) any later version.
  11
  12 # GNU Emacs is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16
  17 # You should have received a copy of the GNU General Public License
  18 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 ### Commentary:
  21
  22 # make all      to compile and build Emacs.
  23 # make install  to install it.
  24 # make TAGS     to update tags tables.
  25 #
  26 # make clean  or  make mostlyclean
  27 #      Delete all files from the current directory that are normally
  28 #      created by building the program.  Don't delete the files that
  29 #      record the configuration.  Also preserve files that could be made
  30 #      by building, but normally aren't because the distribution comes
  31 #      with them.
  32 #
  33 #      Delete `.dvi' files here if they are not part of the distribution.
  34 #
  35 # make distclean
  36 #      Delete all files from the current directory that are created by
  37 #      configuring or building the program.  If you have unpacked the
  38 #      source and built the program without creating any other files,
  39 #      `make distclean' should leave only the files that were in the
  40 #      distribution.
  41 #
  42 # make maintainer-clean
  43 #      Delete everything from the current directory that can be
  44 #      reconstructed with this Makefile.  This typically includes
  45 #      everything deleted by distclean, plus more: .elc files,
  46 #      C source files produced by Bison, tags tables, info files,
  47 #      and so on.
  48 #
  49 # make extraclean
  50 #      Still more severe - delete backup and autosave files, too.
  51 #
  52 # make bootstrap
  53 #      Removes all the compiled files to force a new bootstrap from a
  54 #      clean slate, and then build in the normal way.
  55 #
  56 # make docs
  57 #      Make Emacs documentation files from their sources; requires makeinfo.
  58
  59 SHELL = @SHELL@
  60
  61 # This may not work with certain non-GNU make's.  It only matters when
  62 # inheriting a CDPATH not starting with the current directory.
  63 CDPATH=
  64
  65 # If Make doesn't predefine MAKE, set it here.
  66 @SET_MAKE@
  67
  68 # Prevent submakes from outputting "Entering directory ..." and
  69 # "Leaving directory..." diagnostics that would mess up 'make echo-info'.
  70 QUIET_SUBMAKE = MAKELEVEL=0
  71
  72 # ==================== Things `configure' Might Edit ====================
  73
  74 cache_file = @cache_file@
  75 CONFIGURE_FLAGS = --cache-file=$(cache_file)
  76
  77 CC=@CC@
  78 CFLAGS=@CFLAGS@
  79 LDFLAGS=@LDFLAGS@
  80 CPPFLAGS=@CPPFLAGS@
  81 EXEEXT=@EXEEXT@
  82
  83 ### These help us choose version- and architecture-specific directories
  84 ### to install files in.
  85
  86 ### This should be the number of the Emacs version we're building,
  87 ### like `18.59' or `19.0'.
  88 version=@version@
  89
  90 ### This should be the name of the configuration we're building Emacs
  91 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  92 configuration=@configuration@
  93
  94 ### The nt/ subdirectory gets built only for MinGW
  95 NTDIR=@NTDIR@
  96
  97 # ==================== Where To Install Things ====================
  98
  99 # Location to install Emacs.app under GNUstep / Mac OS X.
 100 # Later values may use these.
 101 ns_appbindir=@ns_appbindir@
 102 ns_appresdir=@ns_appresdir@
 103 # Either yes or no depending on whether this is a relocatable Emacs.app.
 104 ns_self_contained=@ns_self_contained@
 105
 106 # The default location for installation.  Everything is placed in
 107 # subdirectories of this directory.  The default values for many of
 108 # the variables below are expressed in terms of this one, so you may
 109 # not need to change them.  This defaults to /usr/local.
 110 prefix=@prefix@
 111
 112 # Like `prefix', but used for architecture-specific files.
 113 exec_prefix=@exec_prefix@
 114
 115 # Where to install Emacs and other binaries that people will want to
 116 # run directly (like etags).
 117 bindir=@bindir@
 118
 119 # The root of the directory tree for read-only architecture-independent
 120 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 121 datarootdir=@datarootdir@
 122
 123 # Where to install architecture-independent data files.  ${lispdir}
 124 # and ${etcdir} are subdirectories of this.
 125 datadir=@datadir@
 126
 127 # Where to install and expect the files that Emacs modifies as it
 128 # runs.  These files are all architecture-independent.
 129 # Right now, this is not used.
 130 sharedstatedir=@sharedstatedir@
 131
 132 # Where to install and expect executable files to be run by Emacs
 133 # rather than directly by users (and other architecture-dependent
 134 # data, although Emacs does not have any).  The executables
 135 # are actually installed in ${archlibdir}, which is (normally)
 136 # a subdirectory of this.
 137 libexecdir=@libexecdir@
 138
 139 # Where to install Emacs's man pages.
 140 # Note they contain cross-references that expect them to be in section 1.
 141 mandir=@mandir@
 142 man1dir=$(mandir)/man1
 143
 144 # Where to install and expect the info files describing Emacs.
 145 infodir=@infodir@
 146 # Info files not in the doc/misc directory (we get those via make echo-info).
 147 INFO_EXT=@INFO_EXT@
 148 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
 149
 150 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 151 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 152
 153 # Directory for local state files for all programs.
 154 localstatedir=@localstatedir@
 155
 156 # Where to look for bitmap files.
 157 bitmapdir=@bitmapdir@
 158
 159 # Where to find the source code.  The source code for Emacs's C kernel is
 160 # expected to be in ${srcdir}/src, and the source code for Emacs's
 161 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 162 # set by the configure script's `--srcdir' option.
 163
 164 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 165 srcdir=@srcdir@
 166 abs_srcdir=@abs_srcdir@
 167 abs_builddir=@abs_builddir@
 168 # MinGW CPPFLAGS may use this.
 169 abs_top_srcdir=@abs_top_srcdir@
 170
 171 # Where the manpage source files are kept.
 172 mansrcdir=$(srcdir)/doc/man
 173
 174 # Tell make where to find source files; this is needed for the makefiles.
 175 VPATH=@srcdir@
 176
 177 # Where to find the application default.
 178 x_default_search_path=@x_default_search_path@
 179
 180 # Where the etc/emacs.desktop file is to be installed.
 181 desktopdir=$(datarootdir)/applications
 182
 183 # Where the etc/images/icons/hicolor directory is to be installed.
 184 icondir=$(datarootdir)/icons
 185
 186 # The source directory for the icon files.
 187 iconsrcdir=$(srcdir)/etc/images/icons
 188
 189 # ==================== Emacs-specific directories ====================
 190
 191 # These variables hold the values Emacs will actually use.  They are
 192 # based on the values of the standard Make variables above.
 193
 194 # Where to install the lisp, leim files distributed with
 195 # Emacs.  This includes the Emacs version, so that the
 196 # lisp files for different versions of Emacs will install
 197 # themselves in separate directories.
 198 lispdir=@lispdir@
 199 leimdir=@leimdir@
 200
 201 # Directories Emacs should search for standard lisp files.
 202 # The default is ${lispdir}:${leimdir}.
 203 standardlisppath=@standardlisppath@
 204
 205 # Directories Emacs should search for lisp files specific to this
 206 # site (i.e. customizations), before consulting ${standardlisppath}.
 207 # This should be a colon-separated list of directories.
 208 locallisppath=@locallisppath@
 209
 210 # Where Emacs will search to find its lisp files.  Before
 211 # changing this, check to see if your purpose wouldn't
 212 # better be served by changing locallisppath.  This
 213 # should be a colon-separated list of directories.
 214 # The default is ${locallisppath}:${standardlisppath}.
 215 lisppath=@lisppath@
 216
 217 # Where Emacs will search for its lisp files while building.
 218 # This is only used during the process of compiling Emacs,
 219 # to help Emacs find its lisp files before they've been installed
 220 # in their final location.
 221 # This should be a colon-separated list of directories.
 222 # Normally it points to the lisp/ directory in the sources and
 223 # the leim/ directory in the build tree.
 224 # NB lread.c relies on lisp/ being first here.
 225 # TODO generate leim in srcdir also, prebuild in tarfiles.
 226 buildlisppath=${abs_srcdir}/lisp:${abs_builddir}/leim
 227
 228 # Where to install the other architecture-independent
 229 # data files distributed with Emacs (like the tutorial,
 230 # the cookie recipes and the Zippy database). This path
 231 # usually contains the Emacs version number, so the data
 232 # files for multiple versions of Emacs may be installed
 233 # at once.
 234 etcdir=@etcdir@
 235
 236 # Where to put executables to be run by Emacs rather than
 237 # the user.  This path usually includes the Emacs version
 238 # and configuration name, so that multiple configurations
 239 # for multiple versions of Emacs may be installed at
 240 # once.
 241 archlibdir=@archlibdir@
 242
 243 # Where to put the etc/DOC file.
 244 etcdocdir=@etcdocdir@
 245
 246 # Where to install Emacs game score files.
 247 gamedir=@gamedir@
 248
 249 # ==================== Utility Programs for the Build ====================
 250
 251 # Allow the user to specify the install program.
 252 # Note that if the system does not provide a suitable install,
 253 # configure will use build-aux/install-sh.  Annoyingly, it does
 254 # not use an absolute path.  So we must take care to always run
 255 # INSTALL-type commands from the directory containing the Makefile.
 256 # This explains (I think) the cd thisdir seen in several install rules.
 257 INSTALL = @INSTALL@
 258 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 259 INSTALL_DATA = @INSTALL_DATA@
 260 INSTALL_INFO = @INSTALL_INFO@
 261 # By default, we uphold the dignity of our programs.
 262 INSTALL_STRIP =
 263 MKDIR_P = @MKDIR_P@
 264 # Create a link to a file in the same directory as the target.
 265 LN_S_FILEONLY = @LN_S_FILEONLY@
 266
 267 # We use gzip to compress installed .el files.
 268 GZIP_PROG = @GZIP_PROG@
 269
 270 # ============================= Targets ==============================
 271
 272 # Program name transformation.
 273 TRANSFORM = @program_transform_name@
 274
 275 # What emacs should be called when installed.
 276 EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
 277 EMACS = ${EMACS_NAME}${EXEEXT}
 278 EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
 279
 280 # Subdirectories to make recursively.
 281 SUBDIR = $(NTDIR) lib lib-src src lisp leim
 282
 283 # The subdir makefiles created by config.status.
 284 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
 285 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
 286
 287 # Subdirectories to install, and where they'll go.  lib-src's and nt's
 288 # makefiles know how to install them, so we don't do that here.
 289 # Directories that cannot simply be copied, eg info, are treated
 290 # separately.  quail appears twice because in out-of-tree builds, it
 291 # exists twice.
 292 COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
 293 COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}/ja-dic" "$(DESTDIR)${leimdir}/quail" "$(DESTDIR)${leimdir}/quail"
 294
 295 all: ${SUBDIR}
 296
 297 .PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
 298
 299 removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
 300
 301 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 302 # See comments in configure.ac for why it is done this way, as opposed
 303 # to just letting configure generate epaths.h from epaths.in in a
 304 # similar way to how Makefile is made from Makefile.in.
 305 epaths-force: FRC
 306         @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
 307           locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
 308           buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
 309           x_default_search_path=`echo ${x_default_search_path}`; \
 310           gamedir=`echo ${gamedir}`; \
 311           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 312           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
 313           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 314           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 315           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 316           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 317           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 318           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 319           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 320           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 321           -e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') &&             \
 322         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 323
 324 # Replace "${w32prefix}" with '%emacs_dir%' (which expands to install
 325 # directory at runtime).
 326 msys_w32prefix_subst=sed -e 's!\(^\|;\)'"$${w32prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
 327
 328 # Quote Sed special characters (except backslash and newline) with
 329 # a double backslash.
 330 msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
 331
 332 # The w32 build needs a slightly different editing, and it uses
 333 # nt/epaths.nt as the template.
 334 #
 335 # Use the value of ${locallisppath} supplied by `configure',
 336 # to support the --enable-locallisppath argument.
 337 #
 338 # In this case, the paths written to 'src/epaths.h' must be in native
 339 # MS-Windows format (e.g. 'c:/foo/bar'), because temacs is a MinGW
 340 # program that doesn't support MSYS-style paths (e.g. '/c/foo/bar' or
 341 # '/foo/bar').
 342 epaths-force-w32: FRC
 343         @(w32srcdir=`${srcdir}/build-aux/msys-to-w32 "${srcdir}"`; \
 344           w32blddir=`${srcdir}/build-aux/msys-to-w32 .`; \
 345           w32prefix=`${srcdir}/build-aux/msys-to-w32 "${prefix}" N`; \
 346           w32prefixpattern=`echo "${w32prefix}" | ${msys_sed_sh_escape}` ; \
 347           w32locallisppath=`${srcdir}/build-aux/msys-to-w32 "${locallisppath}" N ":" "\\;" | ${msys_w32prefix_subst}` ; \
 348           sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$          \
 349           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${w32locallisppath}"'";' \
 350           -e '/^.*#/s/@VER@/${version}/g'                       \
 351           -e '/^.*#/s/@CFG@/${configuration}/g'                 \
 352           -e '/^.*#/s|@BLD@|$${w32blddir}|g'                    \
 353           -e "/^.*#/s|@SRC@|$${w32srcdir}|g") &&                \
 354         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 355
 356 # If lib/Makefile would build files in '.', then build them before
 357 # building 'lib', to avoid races with parallel makes.
 358 lib: am--refresh
 359
 360 lib-src src: $(NTDIR) lib
 361
 362 src: lib-src
 363
 364 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
 365 # and `leim'.
 366 lisp leim: src
 367
 368 # These targets should be "${SUBDIR} without `src'".
 369 lib lib-src lisp leim nt: Makefile FRC
 370         cd $@ && $(MAKE) all $(MFLAGS)                         \
 371           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 372           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 373
 374 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 375 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 376 # constructed yet) or the empty string (otherwise).
 377 # src/Makefile.in uses it to implement conditional dependencies, so that
 378 # files that need bootstrap-emacs to be built do not additionally need
 379 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 380 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 381 # all preloaded elisp files, and only then dump the actual src/emacs, which
 382 # is not wrong, but is overkill in 99.99% of the cases.
 383 src: Makefile FRC
 384         dirstate='.bzr/checkout/dirstate';                              \
 385         vcswitness='$$(srcdir)/../'$$dirstate;                          \
 386         [ -r "$(srcdir)/$$dirstate" ] || vcswitness='';                 \
 387         cd $@ || exit;                                                  \
 388         boot=bootstrap-emacs$(EXEEXT);                                  \
 389         [ ! -x "$$boot" ] || boot='';                                   \
 390         $(MAKE) all $(MFLAGS)                                           \
 391           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'          \
 392           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"   \
 393           VCSWITNESS="$$vcswitness"
 394
 395 blessmail: Makefile src FRC
 396         cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
 397           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 398
 399 # We used to have one rule per */Makefile.in, but that leads to race
 400 # conditions with parallel makes, so let's assume that the time stamp on
 401 # ./Makefile is representative of the time stamp on all the other Makefiles.
 402 #
 403 # config.status overrides MAKEFILE_NAME with a bogus name when creating
 404 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
 405 # config.status and overwrite config.status while executing it (Bug#11214).
 406 #
 407 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
 408 # then attempts to build that file.  This forces 'Makefile', 'lib/Makefile',
 409 # etc. to be built without running into similar recursion problems.
 410 MAKEFILE_NAME = Makefile
 411 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
 412           $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
 413         MAKE='$(MAKE)' ./config.status
 414
 415 # Don't erase these files if make is interrupted while refreshing them.
 416 .PRECIOUS: Makefile config.status
 417
 418 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 419         if [ -x ./config.status ]; then \
 420             $(CFG) ./config.status --recheck;   \
 421         else                            \
 422             $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
 423         fi
 424
 425 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
 426
 427 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 428         cd ${srcdir} && autoconf
 429
 430 ACLOCAL_INPUTS = $(srcdir)/configure.ac $(srcdir)/m4/gnulib-comp.m4
 431 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
 432         cd $(srcdir) && aclocal -I m4
 433
 434 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
 435   $(srcdir)/lib/gnulib.mk
 436 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
 437         cd $(srcdir) && automake --gnu -a -c lib/Makefile
 438
 439 # Regenerate files that this makefile would have made, if this makefile
 440 # had been built by Automake.  The name 'am--refresh' is for
 441 # compatibility with subsidiary Automake-generated makefiles.
 442 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
 443 .PHONY: am--refresh
 444
 445 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 446         @ # Usually, there's no need to rebuild src/config.in just
 447         @ # because stamp-h.in has changed (since building stamp-h.in
 448         @ # refreshes config.in as well), but if config.in is missing
 449         @ # then we really need to do something more.
 450         [ -r "$@" ] || ( cd ${srcdir} && autoheader )
 451 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 452         cd ${srcdir} && autoheader
 453         rm -f $(srcdir)/src/stamp-h.in
 454         echo timestamp > $(srcdir)/src/stamp-h.in
 455
 456 # ==================== Installation ====================
 457
 458 .PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info
 459 .PHONY: install-man install-etc install-strip install-$(NTDIR)
 460 .PHONY: uninstall uninstall-$(NTDIR)
 461
 462 ## If we let lib-src do its own installation, that means we
 463 ## don't have to duplicate the list of utilities to install in
 464 ## this Makefile as well.
 465
 466 install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail
 467         @true
 468
 469 ## Ensure that $subdir contains a subdirs.el file.
 470 ## Here and elsewhere, we set the umask so that any created files are
 471 ## world-readable.
 472 ## TODO it might be good to warn about non-standard permissions of
 473 ## pre-existing directories, but that does not seem easy.
 474 write_subdir=if [ -f "$${subdir}/subdirs.el" ]; \
 475         then true; \
 476         else \
 477           umask 022; \
 478           ${MKDIR_P} "$${subdir}"; \
 479           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 480            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 481             > "$${subdir}/subdirs.el"; \
 482         fi
 483
 484 ### Install the executables that were compiled specifically for this machine.
 485 ### We do install-arch-indep first because the executable needs the
 486 ### Lisp files and DOC file to work properly.
 487 install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
 488         umask 022; ${MKDIR_P} "$(DESTDIR)${bindir}"
 489         cd lib-src && \
 490           $(MAKE) install $(MFLAGS) prefix="${prefix}" \
 491             exec_prefix="${exec_prefix}" bindir="${bindir}" \
 492             libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
 493             INSTALL_STRIP=${INSTALL_STRIP}
 494         if test "${ns_self_contained}" = "no"; then \
 495           ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} "$(DESTDIR)${bindir}/$(EMACSFULL)" || exit 1 ; \
 496           chmod 1755 "$(DESTDIR)${bindir}/$(EMACSFULL)" || true; \
 497           if test "x${NO_BIN_LINK}" = x; then \
 498             rm -f "$(DESTDIR)${bindir}/$(EMACS)" ; \
 499             cd "$(DESTDIR)${bindir}" && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
 500           fi; \
 501         else \
 502           subdir=${ns_appresdir}/site-lisp; \
 503           ${write_subdir} || exit 1; \
 504           rm -rf ${ns_appresdir}/share; \
 505         fi
 506
 507 ### Windows-specific install target for installing programs produced
 508 ### in nt/, and its Posix do-nothing shadow.
 509 install-:
 510 install-nt:
 511         cd $(NTDIR) && \
 512           $(MAKE) install $(MFLAGS) prefix="${prefix}" \
 513             exec_prefix="${exec_prefix}" bindir="${bindir}" \
 514             libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
 515             INSTALL_STRIP=${INSTALL_STRIP}
 516
 517 ## In the share directory, we are deleting:
 518 ## applications (with emacs.desktop, also found in etc/)
 519 ## emacs (basically empty except for unneeded site-lisp directories)
 520 ## icons (duplicates etc/images/icons/hicolor)
 521
 522 ## This is install-etc for everything except self-contained-ns builds.
 523 ## For them, it is empty.
 524 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
 525
 526 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 527 ## Needs to be the user running install, so configure can't set it.
 528 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 529           `id -un 2> /dev/null`; do \
 530           [ -n "$${installuser}" ] && break ; \
 531         done
 532
 533 ### Install the files that are machine-independent.
 534 ### Most of them come straight from the distribution; the exception is
 535 ### the DOC file, which is copied from the build directory.
 536
 537 ## We delete each directory in ${COPYDESTS} before we copy into it;
 538 ## that way, we can reinstall over directories that have been put in
 539 ## place with their files read-only (perhaps because they are checked
 540 ## into RCS).  In order to make this safe, we make sure that the
 541 ## source exists and is distinct from the destination.
 542
 543 ## We delete etc/DOC* because there may be irrelevant DOC files from
 544 ## other builds in the source directory.  This is ok because we just
 545 ## deleted the entire installed etc/ directory and recreated it.
 546 ## install-etcdoc installs the relevant DOC.
 547
 548 ## Note that we install etc/refcards/*.ps if present.
 549 ## TODO we should compress these if GZIP_PROG is set.
 550 ## It would be simpler to have a separate install rule for etc/refcards
 551 ## (maybe move it to doc/refcards?).
 552
 553 ## Note that the Makefiles in the etc directory are potentially useful
 554 ## in an installed Emacs, so should not be excluded.
 555
 556 ## We always create the _default_ locallisppath directories, and
 557 ## ensure that they contain a subdirs.el file (via write_subdir).
 558 ## This is true even if locallisppath has a non-default value.
 559 ## In case of non-default value, we used to create the specified directories,
 560 ## but not add subdirs.el to them.  This was a strange halfway house.
 561 ## Nowadays we do not create non-default directories.
 562
 563 ## Note that we use tar instead of plain old cp -R/-r because the latter
 564 ## is apparently not portable (even in 2012!).
 565 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
 566 ## I have no idea which platforms Emacs supports where cp -R does not
 567 ## work correctly, and therefore no idea when tar can be replaced.
 568 ## See also these comments from 2004 about cp -r working fine:
 569 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
 570 install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
 571         -set ${COPYDESTS} ; \
 572         unset CDPATH; \
 573         $(set_installuser); \
 574         for dir in ${COPYDIR} ; do \
 575           [ -d $${dir} ] || exit 1 ; \
 576           dest="$$1" ; shift ; \
 577           if [ -d "$${dest}" ]; then \
 578             exp_dest=`cd "$${dest}" && /bin/pwd`; \
 579             [ "$$exp_dest" = "`cd $${dir} && /bin/pwd`" ] && continue ; \
 580           else true; \
 581           fi; \
 582           if [ "$${dir}" = "leim/quail" ]; then \
 583             [ "`cd $${dir} && /bin/pwd`" = "`cd ${srcdir}/leim/quail && /bin/pwd`" ] && \
 584               continue ; \
 585           else \
 586             rm -rf "$${dest}" ; \
 587             umask 022; ${MKDIR_P} "$${dest}" ; \
 588           fi ; \
 589           echo "Copying $${dir} to $${dest}..." ; \
 590           (cd $${dir}; tar -chf - . ) \
 591             | (cd "$${dest}"; umask 022; \
 592                tar -xvf - && cat > /dev/null) || exit 1; \
 593           if [ "$${dir}" = "${srcdir}/etc" ]; then \
 594               rm -f "$${dest}/DOC"* ; \
 595               rm -f "$${dest}/refcards"/*.aux "$${dest}/refcards"/*.dvi; \
 596               rm -f "$${dest}/refcards"/*.log; \
 597           else true; \
 598           fi; \
 599           (cd "$${dest}" || exit 1; \
 600             for subdir in `find . -type d -print` ; do \
 601               chmod a+rx $${subdir} ; \
 602               rm -f $${subdir}/.gitignore ; \
 603               rm -f $${subdir}/.arch-inventory ; \
 604               rm -f $${subdir}/.DS_Store ; \
 605               rm -f $${subdir}/\#* ; \
 606               rm -f $${subdir}/.\#* ; \
 607               rm -f $${subdir}/*~ ; \
 608               rm -f $${subdir}/*.orig ; \
 609               rm -f $${subdir}/ChangeLog* ; \
 610               [ "$${dir}" != "${srcdir}/etc" ] && \
 611                 rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
 612             done ); \
 613           find "$${dest}" -exec chown $${installuser} {} ';' ;\
 614         done
 615         -rm -f "$(DESTDIR)${leimdir}/leim-list.el"
 616         ${INSTALL_DATA} leim/leim-list.el "$(DESTDIR)${leimdir}/leim-list.el"
 617         -rm -f "$(DESTDIR)${lispdir}/subdirs.el"
 618         umask 022; $(srcdir)/build-aux/update-subdirs "$(DESTDIR)${lispdir}"
 619         subdir="$(DESTDIR)${datadir}/emacs/${version}/site-lisp" ; \
 620           ${write_subdir}
 621         subdir="$(DESTDIR)${datadir}/emacs/site-lisp" ; \
 622           ${write_subdir} || true
 623         [ -z "${GZIP_PROG}" ] || \
 624           ( echo "Compressing *.el ..." ; \
 625             unset CDPATH; \
 626             thisdir=`/bin/pwd`; \
 627             for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}"; do \
 628               cd "$${thisdir}" ; \
 629               cd "$${dir}" || exit 1 ; \
 630               for f in `find . -name "*.elc" -print`; do \
 631                 f_el=`echo "$$f" | sed 's/.elc$$/.el/'`; \
 632                 ${GZIP_PROG} -9n "$$f_el" ; \
 633               done ; \
 634             done )
 635         -chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS}
 636
 637 ## The above chmods are needed because "umask 022; tar ..." is not
 638 ## guaranteed to do the right thing; eg if we are root and tar is
 639 ## preserving source permissions.
 640
 641 ## Note that install-arch-indep deletes and recreates the entire
 642 ## installed etc/ directory, so we need it to run before this does.
 643 install-etcdoc: src install-arch-indep
 644         -unset CDPATH; \
 645         umask 022; ${MKDIR_P} "$(DESTDIR)${etcdocdir}" ; \
 646         exp_etcdocdir=`cd "$(DESTDIR)${etcdocdir}"; /bin/pwd`; \
 647         if [ "`cd ./etc; /bin/pwd`" != "$$exp_etcdocdir" ]; \
 648         then \
 649            docfile="DOC"; \
 650            echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
 651            ${INSTALL_DATA} etc/$${docfile} "$(DESTDIR)${etcdocdir}/$${docfile}"; \
 652            $(set_installuser); \
 653              chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \
 654         else true; fi
 655
 656 install-info: info
 657         umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}"
 658         -unset CDPATH; \
 659         thisdir=`/bin/pwd`; \
 660         exp_infodir=`cd "$(DESTDIR)${infodir}" && /bin/pwd`; \
 661         if [ "`cd ${srcdir}/info && /bin/pwd`" = "$$exp_infodir" ]; then \
 662           true; \
 663         else \
 664           (cd "$(DESTDIR)${infodir}"; \
 665            [ -f dir ] || \
 666              (cd "$${thisdir}"; \
 667               ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir") ); \
 668            info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
 669            cd ${srcdir}/info ; \
 670            for elt in ${INFO_NONMISC} $${info_misc}; do \
 671               test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 672               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 673                (cd "$${thisdir}"; \
 674                 ${INSTALL_DATA} ${srcdir}/info/$$f "$(DESTDIR)${infodir}/$$f"); \
 675                 [ -n "${GZIP_PROG}" ] || continue ; \
 676                 rm -f "$(DESTDIR)${infodir}/$$f.gz"; \
 677                 ${GZIP_PROG} -9n "$(DESTDIR)${infodir}/$$f"; \
 678               done; \
 679              (cd "$${thisdir}"; \
 680               ${INSTALL_INFO} --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
 681            done; \
 682         fi
 683
 684 ## "gzip || true" is because some gzips exit with non-zero status
 685 ## if compression would not reduce the file size.  Eg, the gzip in
 686 ## OpenBSD 4.9 seems to do this (2013/03).  In Emacs, this can
 687 ## only happen with the tiny ctags.1 manpage.  We don't really care if
 688 ## ctags.1 is compressed or not.  "gzip -f" is another option here,
 689 ## but not sure if portable.
 690 install-man:
 691         umask 022; ${MKDIR_P} "$(DESTDIR)${man1dir}"
 692         thisdir=`/bin/pwd`; \
 693         cd ${mansrcdir}; \
 694         for page in *.1; do \
 695           dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
 696           (cd "$${thisdir}"; \
 697            ${INSTALL_DATA} ${mansrcdir}/$${page} "$(DESTDIR)${man1dir}/$${dest}"); \
 698           [ -n "${GZIP_PROG}" ] || continue ; \
 699           rm -f "$(DESTDIR)${man1dir}/$${dest}.gz"; \
 700           ${GZIP_PROG} -9n "$(DESTDIR)${man1dir}/$${dest}" || true; \
 701         done
 702
 703 ## Install those items from etc/ that need to end up elsewhere.
 704
 705 ## If you prefer, choose "emacs22" at installation time.
 706 ## Note: emacs22 does not have all the resolutions.
 707 EMACS_ICON=emacs
 708
 709 install-etc:
 710         umask 022; ${MKDIR_P} "$(DESTDIR)${desktopdir}"
 711         tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
 712         emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
 713         sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
 714           -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
 715           ${srcdir}/etc/emacs.desktop > $${tmp}; \
 716         ${INSTALL_DATA} $${tmp} "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"; \
 717         rm -f $${tmp}
 718         thisdir=`/bin/pwd`; \
 719         cd ${iconsrcdir} || exit 1; umask 022 ; \
 720         for dir in */*/apps */*/mimetypes; do \
 721           [ -d $${dir} ] || continue ; \
 722           ( cd "$${thisdir}"; ${MKDIR_P} "$(DESTDIR)${icondir}/$${dir}" ) ; \
 723           for icon in $${dir}/${EMACS_ICON}[.-]*; do \
 724             [ -r $${icon} ] || continue ; \
 725             ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
 726             dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
 727             ( cd "$${thisdir}"; \
 728               ${INSTALL_DATA} ${iconsrcdir}/$${icon} "$(DESTDIR)${icondir}/$${dir}/$${dest}" ) \
 729             || exit 1; \
 730           done ; \
 731         done
 732
 733 ### Build Emacs and install it, stripping binaries while installing them.
 734 install-strip:
 735         $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
 736
 737 ### Delete all the installed files that the `install' target would
 738 ### create (but not the noninstalled files such as `make all' would create).
 739 ###
 740 ### Don't delete the lisp and etc directories if they're in the source tree.
 741 uninstall: uninstall-$(NTDIR) uninstall-doc
 742         cd lib-src &&                                   \
 743          $(MAKE) $(MFLAGS) uninstall                    \
 744             prefix="${prefix}" exec_prefix="${exec_prefix}" \
 745             bindir="${bindir}" libexecdir="${libexecdir}" \
 746             archlibdir="${archlibdir}"
 747
 748         -unset CDPATH; \
 749         for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${etcdir}" ; do    \
 750           if [ -d "$${dir}" ]; then                     \
 751             case `cd "$${dir}" ; /bin/pwd` in           \
 752               "`cd ${srcdir} ; /bin/pwd`"* ) ;;         \
 753               * ) rm -rf "$${dir}" ;;                   \
 754             esac ;                                      \
 755             case "$${dir}" in                           \
 756               "$(DESTDIR)${datadir}/emacs/${version}"/* )               \
 757                 rm -rf "$(DESTDIR)${datadir}/emacs/${version}"  \
 758               ;;                                        \
 759             esac ;                                      \
 760           fi ;                                          \
 761         done
 762         -rm -rf "$(DESTDIR)${libexecdir}/emacs/${version}"
 763         thisdir=`/bin/pwd`; \
 764         (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
 765          if cd "$(DESTDIR)${infodir}"; then \
 766            for elt in ${INFO_NONMISC} $${info_misc}; do \
 767              (cd "$${thisdir}"; \
 768               $(INSTALL_INFO) --remove --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
 769              if [ -n "${GZIP_PROG}" ]; then \
 770                 ext=.gz; else ext=; fi; \
 771              rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
 772            done; \
 773          fi)
 774         (if [ -n "${GZIP_PROG}" ]; then \
 775             ext=.gz; else ext=; fi; \
 776          if cd ${mansrcdir}; then \
 777            for page in *.1; do \
 778              rm -f "$(DESTDIR)${man1dir}"/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
 779          fi)
 780         (cd "$(DESTDIR)${bindir}" && rm -f $(EMACSFULL) $(EMACS) || true)
 781         (if cd "$(DESTDIR)${icondir}"; then \
 782            rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
 783              hicolor/scalable/apps/${EMACS_NAME}.svg \
 784              hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
 785         fi)
 786         -rm -f "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"
 787         for file in snake-scores tetris-scores; do \
 788           file="$(DESTDIR)${gamedir}/$${file}"; \
 789           [ -s "$${file}" ] || rm -f "$$file"; \
 790         done
 791
 792 ### Windows-specific uninstall target for removing programs produced
 793 ### in nt/, and its Posix do-nothing shadow.
 794 uninstall-:
 795 uninstall-nt:
 796         cd $(NTDIR) &&                                  \
 797          $(MAKE) $(MFLAGS) uninstall                    \
 798             prefix="${prefix}" exec_prefix="${exec_prefix}" \
 799             bindir="${bindir}" libexecdir="${libexecdir}" \
 800             archlibdir="${archlibdir}"
 801
 802 FRC:
 803
 804 # ==================== Cleaning up and miscellanea ====================
 805
 806 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
 807
 808 ### `mostlyclean'
 809 ###      Like `clean', but may refrain from deleting a few files that people
 810 ###      normally don't want to recompile.  For example, the `mostlyclean'
 811 ###      target for GCC does not delete `libgcc.a', because recompiling it
 812 ###      is rarely necessary and takes a lot of time.
 813 mostlyclean: FRC
 814         cd src      && $(MAKE) $(MFLAGS) mostlyclean
 815         cd oldXMenu && $(MAKE) $(MFLAGS) mostlyclean
 816         cd lwlib    && $(MAKE) $(MFLAGS) mostlyclean
 817         cd lib      && $(MAKE) $(MFLAGS) mostlyclean
 818         cd lib-src  && $(MAKE) $(MFLAGS) mostlyclean
 819         cd nt       && $(MAKE) $(MFLAGS) mostlyclean
 820         -cd doc/emacs     && $(MAKE) $(MFLAGS) mostlyclean
 821         -cd doc/misc      && $(MAKE) $(MFLAGS) mostlyclean
 822         -cd doc/lispref   && $(MAKE) $(MFLAGS) mostlyclean
 823         -cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean
 824         cd leim     && $(MAKE) $(MFLAGS) mostlyclean
 825
 826 ### `clean'
 827 ###      Delete all files from the current directory that are normally
 828 ###      created by building the program.  Don't delete the files that
 829 ###      record the configuration.  Also preserve files that could be made
 830 ###      by building, but normally aren't because the distribution comes
 831 ###      with them.
 832 ###
 833 ###      Delete `.dvi' files here if they are not part of the distribution.
 834 clean: FRC
 835         -rm -f etc/emacs.tmpdesktop
 836         cd src      && $(MAKE) $(MFLAGS) clean
 837         cd oldXMenu && $(MAKE) $(MFLAGS) clean
 838         cd lwlib    && $(MAKE) $(MFLAGS) clean
 839         cd lib      && $(MAKE) $(MFLAGS) clean
 840         cd lib-src  && $(MAKE) $(MFLAGS) clean
 841         cd nt       && $(MAKE) $(MFLAGS) clean
 842         -cd doc/emacs     && $(MAKE) $(MFLAGS) clean
 843         -cd doc/misc      && $(MAKE) $(MFLAGS) clean
 844         -cd doc/lispref   && $(MAKE) $(MFLAGS) clean
 845         -cd doc/lispintro && $(MAKE) $(MFLAGS) clean
 846         cd leim     && $(MAKE) $(MFLAGS) clean
 847         cd nextstep && $(MAKE) $(MFLAGS) clean
 848
 849 ### `bootclean'
 850 ###      Delete all files that need to be remade for a clean bootstrap.
 851 top_bootclean=\
 852         rm -f config.cache config.log
 853 ### `distclean'
 854 ###      Delete all files from the current directory that are created by
 855 ###      configuring or building the program.  If you have unpacked the
 856 ###      source and built the program without creating any other files,
 857 ###      `make distclean' should leave only the files that were in the
 858 ###      distribution.
 859 top_distclean=\
 860         ${top_bootclean}; \
 861         rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
 862 distclean: FRC
 863         cd src      && $(MAKE) $(MFLAGS) distclean
 864         cd oldXMenu && $(MAKE) $(MFLAGS) distclean
 865         cd lwlib    && $(MAKE) $(MFLAGS) distclean
 866         cd lib      && $(MAKE) $(MFLAGS) distclean
 867         cd lib-src  && $(MAKE) $(MFLAGS) distclean
 868         cd nt       && $(MAKE) $(MFLAGS) distclean
 869         cd doc/emacs     && $(MAKE) $(MFLAGS) distclean
 870         cd doc/misc      && $(MAKE) $(MFLAGS) distclean
 871         cd doc/lispref   && $(MAKE) $(MFLAGS) distclean
 872         cd doc/lispintro && $(MAKE) $(MFLAGS) distclean
 873         cd leim     && $(MAKE) $(MFLAGS) distclean
 874         cd lisp     && $(MAKE) $(MFLAGS) distclean
 875         cd nextstep && $(MAKE) $(MFLAGS) distclean
 876         for dir in test/automated admin/unidata; do \
 877           [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) distclean); \
 878         done
 879         ${top_distclean}
 880
 881 ### `bootstrap-clean'
 882 ###      Delete everything that can be reconstructed by `make' and that
 883 ###      needs to be deleted in order to force a bootstrap from a clean state.
 884 bootstrap-clean: FRC
 885         cd src      && $(MAKE) $(MFLAGS) bootstrap-clean
 886         cd oldXMenu && $(MAKE) $(MFLAGS) maintainer-clean
 887         cd lwlib    && $(MAKE) $(MFLAGS) maintainer-clean
 888         cd lib      && $(MAKE) $(MFLAGS) maintainer-clean
 889         cd lib-src  && $(MAKE) $(MFLAGS) maintainer-clean
 890         cd nt       && $(MAKE) $(MFLAGS) maintainer-clean
 891         -cd doc/emacs     && $(MAKE) $(MFLAGS) maintainer-clean
 892         -cd doc/misc      && $(MAKE) $(MFLAGS) maintainer-clean
 893         -cd doc/lispref   && $(MAKE) $(MFLAGS) maintainer-clean
 894         -cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean
 895         cd leim     && $(MAKE) $(MFLAGS) maintainer-clean
 896         cd lisp     && $(MAKE) $(MFLAGS) bootstrap-clean
 897         cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
 898         for dir in test/automated admin/unidata; do \
 899           [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) bootstrap-clean); \
 900         done
 901         [ ! -f config.log ] || mv -f config.log config.log~
 902         ${top_bootclean}
 903
 904 ### `maintainer-clean'
 905 ###      Delete everything from the current directory that can be
 906 ###      reconstructed with this Makefile.  This typically includes
 907 ###      everything deleted by distclean, plus more: C source files
 908 ###      produced by Bison, tags tables, info files, and so on.
 909 ###
 910 ###      One exception, however: `make maintainer-clean' should not delete
 911 ###      `configure' even if `configure' can be remade using a rule in the
 912 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 913 ###      anything that needs to exist in order to run `configure' and then
 914 ###      begin to build the program.
 915 top_maintainer_clean=\
 916         ${top_distclean}; \
 917         rm -fr autom4te.cache
 918 maintainer-clean: bootstrap-clean FRC
 919         cd src  && $(MAKE) $(MFLAGS) maintainer-clean
 920         cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
 921         for dir in test/automated admin/unidata; do \
 922           [ ! -d $$dir ] || (cd $$dir && $(MAKE) $(MFLAGS) maintainer-clean); \
 923         done
 924         ${top_maintainer_clean}
 925
 926 ### This doesn't actually appear in the coding standards, but Karl
 927 ### says GCC supports it, and that's where the configuration part of
 928 ### the coding standards seem to come from.  It's like distclean, but
 929 ### it deletes backup and autosave files too.
 930 extraclean:
 931         for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 932         ${top_maintainer_clean}
 933         -rm -f config-tmp-*
 934         -rm -f *~ \#*
 935
 936 # The src subdir knows how to do the right thing
 937 # even when the build directory and source dir are different.
 938 .PHONY: TAGS tags
 939 TAGS tags: lib lib-src src
 940         cd src; $(MAKE) $(MFLAGS) tags
 941
 942 check: all
 943         @if test ! -d test/automated; then \
 944           echo "You do not seem to have the test/ directory."; \
 945           echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
 946         else \
 947           cd test/automated && $(MAKE) $(MFLAGS) check; \
 948         fi
 949
 950 dist:
 951         cd ${srcdir}; ./make-dist
 952
 953 DVIS  = lispref-dvi  lispintro-dvi  emacs-dvi  misc-dvi
 954 HTMLS = lispref-html lispintro-html emacs-html misc-html
 955 INFOS = lispref-info lispintro-info emacs-info misc-info
 956 PDFS  = lispref-pdf  lispintro-pdf  emacs-pdf  misc-pdf
 957 PSS   = lispref-ps   lispintro-ps   emacs-ps   misc-ps
 958
 959 DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
 960 $(DOCS):
 961         t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
 962
 963 .PHONY: $(DOCS) docs pdf ps
 964 .PHONY: info dvi dist check html info-real force-info check-info-dir
 965
 966 ## TODO add etc/refcards.
 967 docs: $(DOCS)
 968 dvi: $(DVIS)
 969 html: $(HTMLS)
 970 info-real: $(INFOS)
 971 pdf: $(PDFS)
 972 ps: $(PSS)
 973
 974
 975 INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
 976         install-lispintro-dvi install-misc-dvi
 977 INSTALL_HTML = install-emacs-html install-lispref-html \
 978         install-lispintro-html install-misc-html
 979 INSTALL_PDF = install-emacs-pdf install-lispref-pdf \
 980         install-lispintro-pdf install-misc-pdf
 981 INSTALL_PS = install-emacs-ps install-lispref-ps \
 982         install-lispintro-ps install-misc-ps
 983 INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS)
 984
 985 ## Install non .info forms of the documentation.
 986 ## TODO add etc/refcards.
 987 $(INSTALL_DOC):
 988         t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
 989
 990 .PHONY: $(INSTALL_DOC) install-doc
 991 .PHONY: install-dvi install-html install-pdf install-ps
 992
 993 install-doc: $(INSTALL_DOC)
 994 install-dvi: $(INSTALL_DVI)
 995 install-html: $(INSTALL_HTML)
 996 install-pdf: $(INSTALL_PDF)
 997 install-ps: $(INSTALL_PS)
 998
 999
1000 UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \
1001         uninstall-lispintro-dvi uninstall-misc-dvi
1002 UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \
1003         uninstall-lispintro-html uninstall-misc-html
1004 UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \
1005         uninstall-lispintro-pdf uninstall-misc-pdf
1006 UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \
1007         uninstall-lispintro-ps uninstall-misc-ps
1008 UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
1009
1010 $(UNINSTALL_DOC):
1011         t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
1012
1013 .PHONY: $(UNINSTALL_DOC) uninstall-doc
1014 .PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
1015
1016 uninstall-doc: $(UNINSTALL_DOC)
1017 uninstall-dvi: $(UNINSTALL_DVI)
1018 uninstall-html: $(UNINSTALL_HTML)
1019 uninstall-pdf: $(UNINSTALL_PDF)
1020 uninstall-ps: $(UNINSTALL_PS)
1021
1022
1023 force-info:
1024 # Note that man/Makefile knows how to put the info files in $(srcdir),
1025 # so we can do ok running make in the build dir.
1026 # This used to have a clause that exited with an error if MAKEINFO = no.
1027 # But it is inappropriate to do so without checking if makeinfo is
1028 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
1029 # Only the doc/*/Makefiles can decide that, so we let those rules run
1030 # and give a standard error if makeinfo is needed but missing.
1031 # While it would be nice to give a more detailed error message, that
1032 # would require changing every rule in doc/ that builds an info file,
1033 # and it's not worth it.  This case is only relevant if you download a
1034 # release, then change the .texi files.
1035 info: force-info
1036         @if test "$(HAVE_MAKEINFO)" = "no"; then \
1037           echo "Configured --without-makeinfo, not building manuals" ; \
1038         else \
1039           $(MAKE) $(MFLAGS) info-real ; \
1040         fi
1041
1042 # The info/dir file must be updated by hand when new manuals are added.
1043 # Cannot add an info/dir entry for efaq-w32 since it is not installed
1044 # on all platforms.
1045 check-info-dir: info
1046         cd info ; \
1047         missing= ; \
1048         for file in *; do \
1049           test -f "$${file}" || continue ; \
1050           case $${file} in \
1051             *-[0-9]*|COPYING|dir|efaq-w32*) continue ;; \
1052           esac ; \
1053           file=`echo $${file} | sed 's/\.info//'` ; \
1054           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
1055         done ; \
1056         if test -n "$${missing}"; then \
1057           echo "Missing info/dir entries: $${missing}" ; \
1058           exit 1 ; \
1059         fi ; \
1060         echo "info/dir is OK"
1061
1062 #### Bootstrapping.
1063
1064 ### This first cleans the lisp subdirectory, removing all compiled
1065 ### Lisp files.  Then re-run make to build all the files anew.
1066
1067 .PHONY: bootstrap
1068
1069 # Bootstrapping does the following:
1070 #  * Remove files to start from a bootstrap-clean slate.
1071 #  * Run autogen.sh.
1072 #  * Rebuild Makefile, to update the build procedure itself.
1073 #  * Do the actual build.
1074 bootstrap: bootstrap-clean FRC
1075         cd $(srcdir) && ./autogen.sh
1076         $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
1077         $(MAKE) $(MFLAGS) info all
1078
1079 .PHONY: check-declare
1080
1081 check-declare:
1082         @if [ ! -f $(srcdir)/src/emacs ]; then \
1083           echo "You must build Emacs to use this command"; \
1084           exit 1; \
1085         fi
1086         cd leim && $(MAKE) $(MFLAGS) $@
1087         cd lisp && $(MAKE) $(MFLAGS) $@